LIGHTING UCL · UCL Universe large without luminous element UCL-WND Universe large with luminous window UCM-SR Universe large with luminous solid rings UCM-VL Universe large with

™SECURITYLIGHTINGLIGHTING

Web: www.securitylighting.com 2100 Golf Road, Suite 460, Rolling Meadows, IL 60008-4704Phone: 1-800-LIGHT IT, 1-800-544-4848, Fax: 847-279-0642Copyright © 03/27/19 Security Lighting, a division of Hubbell Lighting, Inc.All Rights Reserved. • Specifications subject to change without notice. • Printed in U.S.A. • SL_UCL_SPEC 01/19

UCLUniverse® Collection Large LED

SPECIFICATIONS

FEATURES

The first dimension is the height of fixtures with LEDs or horizontal reflectors. EPA for horizontal configuration only.

HOOD NO LUMINOUS 4 LUMINOUS WINDOW (WND)

SOLID RINGS (SR) VERTICAL SLOTS (VSL)

LUMINOUS RINGS (LUM)

Angled (ANG)

DIA: 30"/760 mm

HT: 21.4"/454 mm

WT: 47 lbs EPA: 1.12

HT: 26.7"/680 mm

WT: 28.55 lbs EPA: .60

HT: 26.7"/680 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm

WT:50 lbs EPA: 1.36

Bell (BEL)

DIA: 30"/760 mm

HT: 22"/560 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm


Flared (FLR)

DIA: 32"/810 mm

HT: 21"/535 mmWT: 47 lbs EPA: 1.05

HT: 26.7"/680 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm


HT: 26.7"/680 mm


Skirted Bell (SKB)

DIA: 32"/810 mm

HT: 27.25"/693 mm


HT: 32.5"/826 mm


HT: 32.25"/820 mm


HT: 32.5"/826 mm


HT: 32.25"/820 mm


UCM-LUM-SKB

• Reliable, uniform, glare free illumination• Types II, III, IV, V and custom

distributions1

• 3000K, 4000K, 5000K CCT• 0-10V dimming ready• Integral surge suppression

• LifeShield™ thermal protection• 13 standard powder coat finishes• Upgrade Kits• ANSI C136.31-2010 3G Rated

3000K unlit or 3000K without luminous element only




Model Light Engine CCT Drive Current Finish Options Fusing Controls Mounting

5. FINISHStandard Color

AGN Antique Green BL Black BLT Matte Black CRT Corten DB Dark Bronze DGN Dark Green GT Graphite LG Light Grey MAL Matte Aluminum MDB Bronze Metallic MG Medium Grey TT Titanium WH Arctic White WDB Weathered Bronze VBU Verde Blue

Premium ColorSHK Shamrock SPP Salt and Pepper SFM Seafoam WCP Weathered Copper RAL RAL 4 digit Color CUSTOM Custom Color

6. OPTIONS

Luminous Element May choose one

BLU Blue inner lens RD Red inner lens GRN Green inner lens SLC Unlit during normal operation

Lens May choose one

FTG Clear flat glass lens FLD Lightly diffused flat glass lens HSS House Side shield for Type 4

7. FUSE

(may choose one) SF 120, 277, 347 Volt input DF 208, 240, 480 Volt input

8. CONTROL(may choose one)PCA-C Photocell Adapter, ContemporarySCP Pole Accessory, Motion + Photo Control 2

9. MOUNTING – Must choose one

POLE MOUNT SLA3 SLA7 SLA7(5) SLA8D-4 SLA8D-5 SLA9 SLA10 SLA16 SLA17 SLA17(5) SLA18 SLA20 SLA20A SLA20 SLA20C SLA20D SLA22D-4 SLA22D-5 SLA24 SLA24(5) TRA4 TRA7 TRA8 TRA9

POLE MOUNT TWIN

SLA7-2 SLA7(5)-2 SLA9-2 SLA10-2 SLA16-2 SLA17-2 SLA17(5)-2 SLA18-2 SLA20-2 SLA20A-2 SLA20B-2 SLA20C-2 SLA20D-2 SLA24-2 SLA24(5)-2 TRA4-2 TRA7-2 TRA8-2 TRA9-2

WALL MOUNT

WMA4 WMA5 WMA8 WMA9D WMA10 WMA11 WMA12 WMA16 WMA17 WMA18 WMA20 WMA22D WMA24 WMA37 WMA38 WMA39

PENDANT MOUNT

PMS

ORDERING INFORMATION

1. MODELUCL Universe large without luminous element UCL-WND Universe large with luminous window UCM-SR Universe large with luminous solid rings UCM-VL Universe large with luminous vertical slots UCL-LUM Universe large with luminous rings

2. HOOD (May choose one)

FLR Flared hood FLR-STS Flared hood in natural brushed stainless steel FLR-COP Flared hood in natural brushed copper ANG Angled hood ANG-STS Angled hood in natural brushed stainless steel ANG-COP Angled hood in natural brushed copper BEL Bell hood BEL-STS Bell hood in natural brushed stainless steel BEL-COP Bell hood n natural brushed copper SKB Skirted bell hood SKB-STS Skirted bell hood in natural brushed stainless steel SKB-COP Skirted bell hood in natural brushed copper

2. LIGHT ENGINE

MicroCore Precision aimed opticsT2-56LED Type II T3-56LED Type III T4-56LED Type IV T5-56LED Type V

3. COLOR TEMPERATURE3K 3000K CCT, 70CRI 4K 4000K CCT, 70CRI 5K 5000K CCT, 70CRIAdditional CCT's and 560nm monochromatic amber available by request.¹

4. DRIVE CURRENT700 700mA, 132 watts 450 450mA, 84 watts

Visit www.aal.net for Arms, Poles & Accessories Specification Guide

1 Contact factory2 Sensor Control Programmable – ordered separately from fixture. For complete spec sheet and ordering information, visit www.aal.net/products/sensor_control_programmable/

1 2 3 4 5 6 7 8 9




LUMINAIRE PERFORMANCE

ELECTRICAL CHARACTERISTICS

Optical System Ordering Code

Driver DimmingLED Drive mA

System Watts

Line Voltage Amps AC Min. Power Factor

Max THD (%)

Operating Temp. Range

Dimming Range

Source current out of 0-10V purple wire

Absolute voltage range on 0-10V (+) purple wire

Min Typical Max Min Typical MaxVAC HZ 120 277

MicroCore 56LED700 700 130

120-277 50/601.1 0.48

≥.9 20 -30°C TO +40°C

10% TO 100% 0 MA - 8 mA -2.0 V - +15 V

450 450 80 0.71 0.31

LED COLOR

TM-21 LIFETIME CALCULATION

Ambient Environment °C Projected Lumen Maintenance (% vs. Khrs) Reported L7015 25 50 60 10025 93 91 87 85 78 >60Khrs

Ordering Code3K 4K 5K

CRI Minimum ≥ 70 ≥ 70 ≥ 70CCT Average 3000K 4000K 5000K

ConfigurationOrdering

Code

56LED-5K-700 56LED-4K-700 56LED-3K-700

System Watts

Secondary Lens or Shield

Distribution Bright White (5000K) Neutral White (4000K) Warm White (3000K)

Delivered Lumens

Efficacy (Lm/W)

BUG Rating Delivered Lumens

Efficacy (Lm/W)

BUG Rating Delivered Lumens

Efficacy (Lm/W)

BUG RatingB U G B U G B U G

130No Lens (Standard)

Type II T2 12962 100 3 0 3 12443 96 3 0 3 12055 93 3 0 3Type III T3 13036 100 3 0 3 12515 96 3 0 3 12123 93 3 0 3Type IV T4 12600 97 1 0 3 12096 93 1 0 3 11718 90 1 0 3Type V T5 13321 102 4 0 2 12788 98 4 0 2 12389 95 4 0 2

House Side Shield Type IV T4…HSS 8751 67 0 0 2 8401 65 0 0 2 8139 63 0 0 256LED-5K-450 56LED-4K-450 562LED-3K-450

80 No Lens (Standard)

Type II T2 8753 109 2 0 2 8402 105 2 0 2 8140 102 2 0 2Type III T3 8803 110 2 0 2 8450 106 2 0 2 8186 102 2 0 2Type IV T4 8508 106 1 0 2 8168 102 1 0 2 7912 99 1 0 2Type V T5 8995 112 3 0 2 8635 108 3 0 2 8365 105 3 0 2

House Side Shield Type IV T4…HSS 5909 74 0 0 2 5673 71 0 0 2 5496 69 0 0 2




SPECIFICATIONS

HOUSING

• All housing components shall be die-cast aluminum, sealed with continuous silicone rubber gaskets.

• Hood and spacers shall be heavy gauge spun aluminum with hemmed edges for added rigidity.

• Luminous rings shall be clear acrylic with an internal lens.

• Standard configurations do not require a flat lens, optional lenses shall be tempered glass

• All internal and external hardware shall be stainless steel.

• Optical bezel finish shall match the luminaire housing.

OPTICAL

• Patent pending MicroCore™ LED modules shall independently aim each light emitting diode (LED) in both horizontal rotation and vertical tilt angle.

• LEDs shall be mounted to a metal printed circuit board assembly (PCBA) with a uniform conformal coating over the panel surface and electrical features.

• LED optics shall be clear injection molded PMMA acrylic.

• MicroCore™ PCBA and optic shall be sealed to a die-cast anodized aluminum heat sink with an injection molded silicone rubber gasket. IP66.

• Type 4 distribution with optional House Side Shield not available with clear or diffused glass lenses. Factory installed House Side Shield is optimized for Type 4 distribution and not recommended for use with Type 2 or 3 distribution and not available with type 5 distribution.

ELECTRICAL

• Luminaires shall have integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J.

• Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC.

• Drivers shall not be compatible with current sourcing dimmers, consult factory for current list of known compatible dimming systems, approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV.

• LifeShield™ shall be provided with all configurations for added protection in the event of abnormally excessive high ambient temperature conditions.

CONTROLS

• SCP shall have an integral surge protection device with a currentt rating of 10,000 Amps using the industry standard 8/20uSec wave and sure rating of 372J

• Sensor not intended for use with additional photo-control, wireless control or dimming systems.

PHOTOCELL / EGRESS ADAPTERS

• Adapter(s) shall slip over a 4"/100mm DIA. pole with the luminaire or arm slipping over the adapter to add a total of 4.5”/114mm to the overall height. Adapter(s) shall be prewired, independently rotatable 359°, and have a cast access cover with an integral lens and lanyard.

• Photocell adapter shall include an internal twist lock receptacle. Photocell by others.

• Egress adapter shall require an auxiliary 120 volt supply for operation of an integral MR16 lamp in the event of emergency. The lamp may be aimed and locked into position with an adjustment range of 15°-45°. Adapter shall have a socket that accepts miniature bi-pin MR16 lamps up to 50 watts, lamp by others.

SERVICING

• Luminaire shall have tool-less service access to the gear compartment. Driver and surge suppressor shall be mounted to a prewired tray with quick disconnects that may be removed from the gear compartment.

ARM MOUNTING

• Luminaire shall be attached to the arm assembly with three stainless steel bolts. The connection shall be sealed with a silicone compression gasket.

• Post top arms and brackets shall slip over a 4"/100mm O.D. or a 5”/127mm as configured and secured with six stainless steel set screws.

• Wall mounted arms and brackets shall require mounting hardware by others.

FINISH

• Luminaire finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish.

• Luminaire finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance.

CERTIFICATION

• Luminaire shall be listed with ETL for outdoor, wet location use, UL1598, UL 8750 and Canadian CSA Std. C22.2 no.250.

WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/warranty/




SLA3 WT: 8 LBS EPA: .77

19.5 in 19.5"

495 mm

24.1 in

24.0"610 mm

4" POLE

SLA7 WT: 9 LBS EPA: 1.34

6"150mm

32"800mm

54"1,350mm

SLA7-2 WT: 16 LBS EPA: 2.34

56 1/4"1,406mm 34 1/4"

856mm

6"150mm

50"1,250mm

4" POLE

4" POLE

SLA7 (5) WT: 11 LBS EPA: 1.73

56 7/16"1,411mm 30 1/2"

762mm

6"150mm

30"750mm

SLA7 (5)-2 WT: 18 LBS EPA: 2.60

62"1,550mm

57 1/4"1,431mm

6"150mm

31 1/4"781mm

5" POLE

5" POLE


4" POLE


4" POLE





26"650mm

44"1,100mm

6"150mm

25"625mm

SLA8D WT: 5 LBS EPA: .40

21 1/8"528mm

12"300mm

4" OR 5" POLE

4" POLE


52"1,300mm

44"1,100mm

31"775mm

6"150mm


23"575mm

30"750mm

10"250mm6"

150mm

4" POLE 4" POLE

SLA10-2 WT: 16 LBS EPA: 1.47

46"1,150mm

30"750mm

6"150mm

4"100mm


30 1/4"756mm

6"150mm

41 3/4"1,044mm

4" POLE 4" POLE

SLA16-2 WT: 28 LBS EPA: 4.38

6"150mm

41 3/4"1,044mm

60 1/2"1,512mm


26"650mm

40"1,000mm

4" POLE 4" POLE




SLA17 (5) WT: 24 LBS EPA: 2.20

49 9/16"1,24mm

6"150mm

34 1/4"856mm

SLA17-2 WT: 24 LBS EPA: 2.05

40"1,000mm

52"1,300mm

6"150mm

4" POLE 5" POLE

SLA18 WT: 12 LBS EPA: .85SLA17 (5)-2 WT: 33 LBS EPA: 2.90

68 1/2"1,712mm

49 9/16"1,239mm

6"150mm

30"750mm

28"700mm

6"150mm

5" POLE 4" POLE

SLA18-2 WT: 22 LBS EPA: 1.59

62"1,550mm

28"700mm

6"150mm

4" POLE 4" POLE

3"75mm

39"975mm

10.5"263mm

4" POLE

19 1/2"488mm

3"75mm

25 3/4"644mm

4" POLE

19 1/2"488mm

3"75mm

10.5"263mm

SLA20 WT: 10 LBS EPA: .70

SLA20-2 WT: 18 LBS EPA: 1.25 SLA20A WT: 15 LBS EPA: 1.30




3"75mm

25 3/4"644mm

39"975mm

4" POLE

19 1/2"488mm

3"75mm

25 3/4"644mm

4" POLE

3"75mm

25 3/4"644mm

39"975mm

4" POLE3"

75mm

32"800mm

19 1/2"488mm

4" POLE

3"75mm

32"800mm

39"975mm

4" POLE

3"75mm

17 3/4"444mm

19 1/2"488mm

4" O.D. POLE

4" POLE

3"75mm

17 3/4"444mm

4" O.D. POLE

39"975mm

4" POLE

20"500mm

4" POLE

SLA20A-2 WT: 26 LBS EPA: 1.94 SLA20B WT: 14 LBS EPA: 1.40

SLA20B-2 WT: 24 LBS EPA: 1.70 SLA20C WT: 15 LBS EPA: 1.39

SLA20D WT: 12 LBS EPA: .75SLA20C-2 WT: 26 LBS EPA: 1.91

SLA20D-2 WT: 21 LBS EPA: 1.18 SLA22D WT: 4 LBS EPA: .44




21"525mm

38 1/4"956mm

6"150mm 4" POLE

44"1,100mm

38 3/4"969mm

6"150mm

37 3/8"934mm

4" POLE

6"150mm

45 1/2"1,138mm

27 1/8"678mm

43 7/8"1,097mm

5" POLE

56 1/4"1,406mm

46"1,150mm

6"150mm

5" POLE

TRA4 WT: 16 LBS EPA: 1.81

6"150mm

22"550mm

56"1,400mm

4" POLE

TRA7 WT: 12 LBS EPA: .90

24"600mm

28 1/4"706mm

4 1/4"106mm

6"150mm

4" POLE

TRA7-2 WT: 18 LBS EPA: 1.62

6"150mm

4 7/8"122mm

50"1,250mm

28 7/8"722mm


24"600mm

54"1,350mm

6"150mm

32"800mm

4" POLE

4" POLE

SLA24 WT: 9 LBS EPA: .85 SLA24-2 WT: 14 LBS EPA: 1.59

SLA24(5) WT: 11 LBS EPA: 1.17 SLA24(5)-2 WT: 16 LBS EPA: 1.81




TRA8-2 WT: 21 LBS EPA: 2.6850"

1,250mm

56 1/4"1,406mm

6"150mm

32 1/4"806mm

4" POLE


27 3/4"694mm

46 1/2"1,163mm

6"150mm

24 1/4"606mm

4" POLE

TRA9-2 WT: 25 LBS EPA: 2.72

6"150mm

24 1/4"606mm

46 1/2"1,163mm

55 1/2"1,388mm

4" POLE

WMA4 WT: 12 LBS

4-PLC

WIREWAY

9 3/4"244mm

10 3/4"269mm

5 1/2"138mm

5 3/4"144mm

3/4"19mm

3/8"9mm

16"400mm

25 1/2"638mm

22 3/4"569mm

8"200mm

WMA5 WT: 6 LBS

4"100mm

8"200mm

7"175mm

2 5/8"66mm

3/4"19mm

3/8"9mm

WIREWAY

(4-PLC)

16 3/4"419mm

WMA6 WT: 14 LBS

WMA9D WT: 6 LBS

7"175mm

8"200mm

3"75mm

3/8"9mm

3/4"19mm

3 1/2"88mm

4-PLC

WIREWAY

16"400mm

WMA8 WT: 10 LBS

4-PLC

WIREWAY

24 1/2"613mm

20 1/4"506mm

4"100mm

6"150mm

10"250mm

12"300mm

6"150mm

3/4"19mm

3/8"9mm

11 7/8"297mm




WMA10 WT: 16 LBS WMA11 WT: 10 LBS

22"550mm

4"100mm

25 1/2"638mm

16"400mm

3/8"9mm

3/4"19mm

5 3/4"144mm

4-PLC

WIREWAY 48"1,200mm

23"575mm

26"650mm

5"125mm

3/4"19mm

3/8"9mm

4-PLC

WIREWAY

4"100mm

3"75mm

25"625mm

32 1/4"806mm


39"975mm

23"575mm

6"150mm

12"300mm

10"250mm

3/4"19mm

4-PLC

WIREWAY

26"650mm

1 1/2"37.5mm

3/8"9mm

4"100mm

4-PLC

WIREWAY

3/8"9mm

3/4"19mm

9"225mm

38"950mm

44"1,100mm

6"150mm

28"700mm

6"150mm

WMA17 WT: 15 LBS

4-PLC

WIREWAY

25"625mm

36"900mm

34"850mm

5 1/8"128mm

4"100mm

6"150mm

3/4"19mm

3/8"9mm

1 3/4"43.75

2 1/8"53mm

WMA18 WT: 18 LBS

4-PLC

WIREWAY

26"650mm

6"150mm

5"125mm

4"100mm

23"575mm

25"625mm

3/4"19mm

3/8"9mm 3"

75mm

WMA20 WT: 12 LBS WMA22D WT: 4 LBS

4-PLC

WIREWAY

8"200mm

10"250mm

9"225mm

7"175mm

3/4"19mm

3/8"9mm

5"125mm

19 7/8"497mm

3"75mm

2-PLC

5 1/4"131mm 15 1/2"

388mm

8 1/2"213mm 6"

150mm

3/8"9mm





4-PLC

WIREWAY

26"650mm

6"150mm

16"400mm

23"575mm

3/4"19mm

3/8"9mm

22 1/4"556mm

27 3/8"684mm

4"100mm

4-PLC

WIREWAY

5 1/2"138mm

25 1/2"638mm

7/16"11mm

3/4"19mm

8"200mm

26 1/4"656mm

21"525mm

16"400mm

8"200mm


4-PLC

WIREWAY

6"150mm

26"650mm

30"750mm

5"125mm

23"575mm

4"100mm

3/4"18mm

3/8"9mm

4-PLC

WIREWAY

5 1/2"138mm

16"400mm

8"200mm

25 1/2"638mm

7/16"11mm

3/4"19mm

8"200mm

26 1/4"656mm

21"525mm

39"975mm

Documents

LIGHTING UCL · UCL Universe large without luminous element UCL-WND Universe large with luminous window UCM-SR Universe large with luminous solid rings UCM-VL Universe large with