BF120SLI G HTB OX 120 SI N G LE

White Black

1.9”

4.75

”

1.4”

The deep single sided 120 lightbox is specially designed for illuminating large size textile prints. Even illumination is provided by BFF’s Ultra-LEDs mounted to the inside channel of the frame. The outer channel on this profile accepts BFF accessories including footplates and hanging hardware.

• The open and closed profiles can be combined so that the exposed sides of the frame have the “closed” surface while the top or bottom rail has the open channel for the baseplate, suspension hardware and other BFF accessories.

• Perfect light distribution• Edge-lit by Ultra LEDs• Multiple LED positions• Flat packed to minimize freight costs• Back of profile has channel to accept SEG fabric to prevent light leaks

LIGHTBOX 120 SINGLEWallmount, standing and hanging textile LED frame

BF120S SilverBF120B BlackBF120W White

Available in every color on request.

Colors:

Silver

Application: Wallmount, freestanding, suspended from ceilingWidth: 4.75” (120mm) Length: Up to 20 feet

Option: Sound absorbing felt in combination without LED’sAdvised: White backing for the better reflection of the lightPossibilities: By LED on stabilizer is any size possibleLumen per yd: 1980

EL 9206-1148

BF120SLI G HTB OX 120 SI N G LE

Optional

Optional

Optional

BH0240 / BH0250Each frame is delivered with 4 locksets heavyand 4 locksets BH0250.

BH0400These wallmounts can be placed under the frame to hang the frame on the wall.

BH0500If the length of the frame is longer than 13 feet, an extension set (BH0500) is included.

BH0220When connecting the stabilizer, first place the lockset in the channel.

These extension sets can be placed in the channels where the frame is cut in half.

Then put the stabilizer (BFSTS) on the lockset, now tighten the screw with the delivered allen key.

BF120SLI G HTB OX 120 SI N G LE

Optional

Optional

Optional

Optional

LED POWER SUPPLY200-240V

ULTRA LED UNIT47cm x 25mm x 15mm. 5000-7000k White.9x lenses 2.8W 24V.

BH0360Suspended from ceiling.

Sec.: 24VDC, Max 2.5Atc: 80º ta:45ºC

BH0120 / BH0130Base plate for standing. Material: Steel.

NF-041200BF120SLI G HTB OX 120 SI N G LE

Optional

BLOCK-OUT FABRIC

Place the textile print in the frame. Start with the corners and press the silicone strip in the channel.