Upload
others
View
1
Download
0
Embed Size (px)
Citation preview
Lubri
catio
n, Pu
mps &
Comp
ound
s
GREASE FITTINGSGREASE FITTINGS - 1/8" MALE PIPE THREADFITTINGS
Standard package 20 LINC 5000 1/8" STR GREASE FITTING-SHO 21/32PartNo Description Lgth. In.
LINC 5003 1/8" STR GREASE FITTING-MED 1 1/4LINC 5007 1/8" NPT STR. FITTING 1 3/4LINC 5009 1/8" NPT STR. FITTING 2 5/8LINC 5100 1/8" 30° GREASE FITTING 1-3/32LINC 5200 1/8" 45° GREASE FITTING 7/8LINC 5300 1/8" 65° GREASE FITTING 29/32LINC 5400 1/8" 90° GREASE FITTING 27/32GREASE FITTINGS - 1/8" FEMALE PIPETHREAD FITTINGS
Standard package 20. LINC 5505 1/8" STR GREASE FITTING (H1618) 1.0PartNo Description Lgth. In.
GREASE FITTINGS - 1/4" PIPE THREADFITTINGS
Standard package 20. LINC 5050 1/4" STR GREASE FITTING 13/16PartNo Description Lgth. In.
LINC 5350 1/4" 65° GREASE FITTING 1-1/8GREASE FITTINGS - 1/4" -28 THREADFITTINGS
Standard package 20. LINC 5010 1/4"-28 THD STR GREASE ZERK 1/2PartNo Description Lgth. In.
LINC 5013 1/4" STR GREASE FITTING-LON 11/16
LINC 5210 1/4" 45° GREASE FITTING 7/8PartNo Description Lgth. In.
LINC 5410 1/4" 90° GREASE FITTING 25/32
Standard package 20. LINC 5175 6MM STR METRIC GREASE FTG 19/32PartNo Description Lgth. In.
LINC 5176 6MM 45° METRIC GREASE FTG 13/16LINC 5177 6MM 90° METRIC GREASE FTG 3/4
Standard package 20. LINC 5178 8MM STR METRIC GREASE FTG 5/8PartNo Description Lgth. In.
LINC 5179 8MM 45° METRIC GREASE FTG 13/16LINC 5180 8MM 90° METRIC GREASE FTG 3/4
Standard package 20.
LINC 5181 10MM STR GREASE FITTING 5/8PartNo Description Lgth. In.
LINC 5182 10MM 45° GREASE FITTING 13/16LINC 5183 10MM 90° GREASE FITTING 3/4
Standard package 20.
LINC 5026 3/16" GREASE FITTING DR NO BALL CHECK 37/64PartNo Description Lgth. In.
LINC 5029 1/4" GR STR DR FITTING 9/16LINC 5031 5/16" GR STR DR FITTING 9/16LINC 5033 3/16" GR STR DR FITTING 9/16
GREASE FITTINGS - 6MM PIPE THREADFITTINGS
GREASE FITTINGS - 8MM PIPE THREADFITTINGS
GREASE FITTINGS - 10MM PIPE THREADFITTINGS
GREASE FITTINGS - DRIVE TYPE FITTINGS
Phone: 402-455-6151Toll Free: 800-488-9699
550
Lubrication, Pumps & Compounds
GREASE FITTINGSGREASE FITTINGS - FITTING DRIVE TOOL
For use in installing drive type fittings into untapped holes.
LINC 11485 LINCOLN DRIVE TOOLPartNo Description
GREASE FITTINGS - 1/4" STANDARD BUTTONHEAD FITTING, MPTCap In 3/8 - 2 5/8, Cap mm 10-67, Ltngth In 12, Length mm 300. LINC 5705 1/4" STD BUT HD FITTING 53/64PartNo Description Lgth. In.
GREASE FITTINGS - GREASE FITTINGASSORTMENT
A small assortment of the most popular grease fittings. Quantity in Assortment: 5210 - 1 each 5000 - 2 5100 - 1 5400 - 1 5010 - 2 each 5410 - 1 5029 - 1 5033 - 1
LINC GF8 GREASE FITTING ASSORTMENTPartNo Description
GREASE FITTINGS ASSORTMENT 2• 6 different types • 100 pieces • Hydraulic • Ball check Quantity in Assortment: 5000 - 20, 1/8" Straight 5300 - 10, 1/8" 65° Elbow 5400 - 10, 1/8" 90° Elbow 5010 - 40, 1/4" 28° Straight 5210 - 10, 1/4" 28-48° Elbow 5400 - 10, 1/4" 28-90° Elb
HUYETT GF100 100PC GREASE FITTING ASST.PartNo Description
For Grease Cartridges or Bulk Grease Capacity: 20 oz. for Bulk Grease, 14-1/2 oz. for Cartridge All steel construction. Features two-way loading, air vent fitting. Will develop working pressure of 4500 lbs. ALMITE F100 AIR CARTRIDGE GUNPartNo Description
ALMITE F102 LEVER GUN (STANDARD) (11155)ALMITE F103 PISTOL GUN (11145)
Loads either by suction, filler pump, or cartridge. Includes exclusive Flip-Over Follower. Filler nipple for fast and economical filling of gun from filler pump. Special design allows gun to dispense all lubricant from a cartridge. Hi-Pressure Model 1
LINC 1132 LINCOLN 16OZ PISTOL-GRIPPartNo Description
LINC 1142 LINCOLN 16OZ LEVER HPLINC 1151 LINCOLN 21OZ LEVER HP
A combination tool for removing worn or broken fittings and retaping holes for installation of new fittings. Tool has socket wrenches for use in removing both straight and angle fittings. May also be used to remove old pin-type fittings.
LINC G905 LINCOLN EASY-OUT TOOL 1/8 NPTPartNo Description Taps In.
LINC G904 LINCOLN EASY OUT TOOL 1/4-28
For contacting flush-type fittings or hard to reach hydraulic fittings.
LINC 5803 LINCOLN NEEDLE NOZZLEPartNo Description
GREASE GUNSGREASE GUNS - ALEMITE ECONOMY
GREASE GUNS - LINCOLN HEAVY DUTY
LUBRICATION ACCESSORIESLUBE ACCESSORIES - LINCOLN EASY-OUTTOOLS
LUBE ACCESSORIES - LINCOLN NEEDLENOZZLE
Phone: 402-455-6151Toll Free: 800-488-9699
551
Call Industrial Sales at 800-488-9699
Lubri
catio
n, Pu
mps &
Comp
ound
s
LUBRICATION ACCESSORIESGREASE GUN EXTENSION - SWIVELEXTENSION
NAT 48 360° SWIVEL COUPLER ASSEMBLY-1/8" NPTPartNo Description
GREASE INJECTORS - AGTRONIC
Just attach to hand grease gun and slip the stainless steel surgical needle under or through the bearing seal. Also ideal for getting lubrication to "hard to get at" points of friction. A new and unique approach for prolonging the life of sealed bearings. TRIAD 131607 AGTRONIC FLEX GREASE INJ (400)PartNo Description
TRIAD 131409 AGTRONIC RIGID GREASE INJ (401)
GREASE GUN HOLDERS
ALMITE F331035 GUN HOLDER (11840)PartNo Description
EXTENSIONS - LINCOLN FLEXIBLE/RIGID
LINC 5858 LINCOLN FLEX/RIGID EXT ADPTPartNo Description
NIPPLES - LINCOLN FILLER NIPPLE
LINC 91108 LINCOLN 1/8" FILLER NIPPLEPartNo Description
ALMITE B306740 LOADER FITTING 1/8"PartNo Description
FOR USE WITH HAND OPERATED GREASE GUNS This hose has a working pressure of 4,000 lbs., burst pressure of 10,000 lbs., and is 3/16" I.D. with 1/8" M.P.T. NOTE: FOR LENGTHS NOT LISTED, JOHN DAY COMPANY WILL MAKE HOSES TO CUSTOMER SPECIFICATIONS.
GATES 31612 12" WHIP HOSE ASSEMBLYPartNo Description
GATES 31618 18" WHIP HOSE ASSEMBLYGATES 31624 24" WHIP HOSE ASSEMBLYGATES 31636 36" WHIP HOSE ASSEMBLY
LINC G906 LINCOLN 6" EXT TUBEPartNo Description
LINC 62061 LINCOLN 12" EXT TUBELINC 62117 LINCOLN 18" EXT TUBE
No. 5852 - Small diameter Hydraulic Coupler No. 5845 - Hydraulic Coupler.
LINC 5852 LINCOLN HAND GUN HYD CPLRPartNo Description
LINC 5845 LINCOLN 1/8" NPT HYD COUPL
NIPPLES - ALEMITE LOADER NIPPLE
HOSE - GATES HIGH PRESSURE WHIP HOSE
Phone: 402-455-6151Toll Free: 800-488-9699
552
LINCOLN EXTENSION TUBES FOR GREASE GUNS
LINCOLN HYDRAULIC COUPLERS
Lubrication, Pumps & Compounds
LUBRICATION ACCESSORIESGREASE GUN FILLERS & FILLER VALVE
Fits 25 or 35 lb. Pails Includes Loader Valve, Follower, Pump, Cover, Loader & Follower Plate
ALMITE F407 GUN FILLERPartNo Description
NAT 29 GREASE GUN FILLER VALVE
COUPLERS - HYDRAULIC
360° Coupler Adapter, swivels in full circle and locks in any one of eight 45° angle positions. Adjustable coupler section assembled with a 45° angle body permitting contact with fittings in reverse position. Angle body has 1/8" NPT female inlet for addition of pipe extension.
HUYETT 52P HAND GUN HYD COUPLERPartNo Description
LINC 5848 LINCOLN 360_ HYD COUPL ADPT
•Fits 15-55 gallon drums. Designed for fast transfer of lubricants, solvents, industrial chemicals, additives & other non-corrosive liquids.
ALMITE F406 TRANSFER PUMP (11230)PartNo Description
Use for dispensing gasoline, diesel fuel, and similar light petroleum products. It has a 2" aluminum sliding bung adapter and a 3/4" x 41" suction pipe enabling it to fit 15 through 55 gallon drums. The body is made of heavy duty cast iron. It will deliver 1 gallon per 14 revolutions. NAT 1002 ROTARY VANE HAND PUMPPartNo Description
Light weight strong die cast aluminum construction. Stainless Steel Components. Hardened Steel Pivot Pins. Teflon Piston Seals for long life and smooth operation. Integral Nozzle Holder in housing provides a NozzleHolder and prevents contaminant from entering hose. One quart per stroke gives fast efficient transfer. Locking mechanism to prevent theft. Units come complete with 8’ Hose, Die Cast Aluminum Nozzle, and Inlet Suction, Pipe and Bung Adapter.
PBL H6F DOUBLE ACTION PISTON PUMPPartNo Description
An efficient motor and gear design allow high output flow at a reduced current draw. Pumps up to 15 GPM at only 12 amps and operates in a range of 12 to 14 amps so your 12V battery has plenty of reserve.
SYSTEM INCLUDES: 12 volt (battery) fuel pump.
PBL FP12 12 VOLT DC UTILITY PUMPPartNo Description
Phone: 402-455-6151Toll Free: 800-488-9699
553
Call Industrial Sales at 800-488-9699
LUBRICATION PUMPS HEAVY DUTY BARREL PUMP
MODEL #1002 SPENCER ROTARY HAND PUMP
PBL DOUBLE ACTION PISTON PUMP
PBL BATTERY POWERED TRANSFER PUMP
Lubri
catio
n, Pu
mps &
Comp
ound
s
LUBRICATION ACCESSORIES
A fast-selling, inexpensive pistol oiler. Flared copper bronze finish container for top appearance and stability. Packed 6 per carton.
DL 56080 600 PISTOL OILER W/5" STRAIGHT SPOUTPartNo Description
DL 56112 606 PISTOL OILER W/6" FLEXIBLE SPOUTDL 56176 626 10 OZ PISTOL OILER W/6" FLEXIBLE SPOUTDL 56192 630 20 OZ PISTOL OILER W/6" STRAIGHT SPOUT
These expertly made oilers feature double seamed spring steel bottoms plus roll threaded filler openings for leakproof body-to-spout connection. DL 56024 505 SPRING BOTTOM OILER, 6 OZ. W/4-1/2" TAPERED
SPOUTPartNo Description
Handles any oil that flows, from gasoline to heaviest oils. Delivers 1 to 150 drops per stroke as desired, no waste. Produces 250 lbs. tip pressure. Welded steel construction, with one-piece natural grip steel handle. Goldenrod zinc die-cast high pressure pump with precision machined piston. Powder coated copper bronze finish.
DL 55648 120-A 1 QT OILER L/SPOUTPartNo Description
DL 55712 120-B 1-1/2PT OILER L/SPOUTDL 55776 120-C 1 PT OILER L/SPOUTDL 56240 707 12 OZ OILER W/8" FLEXDL 301012 GOLDENROD 12" STR SPOUTDL 301013 GOLDENROD 10" STR SPOUTDL 301025 GOLDENROD 12" FLEX SPOUTDL 301026 GOLDENROD 15" FLEX SPOUTDL 301024 GOLDENROD 10" FLEX SPOUTDL 301014 GOLDENROD 8" STR. SPOUT
Oilers are equipped with the genuine Eagle solid brasshydraulic pump. Body of oiler is high density polyethylene with seamless welded steel 6" bent spout. Std. Pkg. - 6
EAGLE 27A CS=6 CN 10 OZ RAINBOW OILERPartNo Description
2-quart galvanized measure with rigid spout.
NAT 711 2 QT. OIL MEASURE FUNNELPartNo Description
8-quart lock-on type galvanized funnel with screen.
NAT 703 8 QT. GALV TRACTOR FUNNELPartNo Description
5-quart off-set galvanized funnel with screen. NAT 705 5 QT. GALV OFFSET FUNNELPartNo Description
1-quart galvanized funnel with screen.
NAT 701 1 QT. GALV IRON FUNNELPartNo Description
FUEL ACCESSORIESFUNNELSFunnels - Measure
Funnels - 8 Quart
Funnels - 5 Quart
Funnels - 1 Quart
Phone: 402-455-6151Toll Free: 800-488-9699
554
DUTTON LAINSON GOLDEN ROD PISTOL OILERS
DUTTON LAINSON SPRING BOTTOM OILERS
GOLDEN ROD DELUXE HYDRAULIC PUMP OILERS
EAGLE PUMP OILER
Lubrication, Pumps & Compounds
FUEL ACCESSORIESFILTERS & ACCESSORIESFuel Filter No. 495
Designed for Gasohol, Gasoline, Diesel Fuel, and other fuels. It has a new alcohol resistant plastic see through bowl, and is ideal for farm, construction and light industrial use. DL 56599 495 FUEL FILTERPartNo Description
Fuel Filter No. 496
Designed for Gasohol, Gasoline, Diesel Fuel, and other fuels. It has a new alcohol resistant plastic see thru bowl, and is ideal for farm, construction and light industrial use. DL 75060 470-5 RPLC ELEMENTPartNo Description
Fuel Filter No. 497
Designed for Gasohol, Gasoline, Diesel Fuel, and other fuels. It has a new alcohol resistant plastic see thru bowl, and is ideal for farm, construction and light industrial use.
DL 75056 470-7 GASKETPartNo Description
Fuel Filter No. 498
Designed for Gasohol, Gasoline, Diesel Fuel, and other fuels. It has a new alcohol resistant plastic see thru bowl, and is ideal for farm, construction and light industrial use.
DL 75074 495-4 RPLC BOWLPartNo Description
STANDARD GOLDENROD SPIN-ON FUEL FILTER - For use with gasoline, gasohol, diesel fuel and other fuels. Filters microscopic particles (10 Microns) of rust, sand, dirt, scale, and lint. Working pressure up to 50 PSI. Maximum recommended flow rate: 12 GPM.
DL 56606 595 FUEL FILTERPartNo Description
DL 56608 595-5 RPLC CANISTERDL 56610 596 FUEL FILTER-WATER BLOCKDL 56612 596-5 RPLC CANISTER
Fits bowl perfectly for easy removal without cracking. Made of weather resistant reinforced nylon. For use on the following fuel tank filters: •Goldenrod® No. 495 see-thru filter •Goldenrod® No. 496 water-block filter •Goldenrod® No. 495-4 (bowl only)
DL 56585 491 FILTER WRENCHPartNo Description
Furnished with Male Couplings (both ends). NOTE: This hose has a static ground wire to reduce buildup of static electricity and lower the risk of creating sparks.
GYR 3410 595-026-191-86101 3/4"X10’ FUEL HOSEPartNo Description
GYR 3414 595-026-191-88301 3/4’X 14’GYR 3420 595-026-191-86601 3/4"X 20’GYR 110 595-026-254-92901 1" X 10’GYR 114 595-026-254-88101 1" X 14’GYR 120 595-026-254-91601 1" X 20’
Fuel Filter - Goldenrod Spin-On
Fuel Filter Wrench
Fuel Hose Farm Service
Phone: 402-455-6151Toll Free: 800-488-9699
555
Lubri
catio
n, Pu
mps &
Comp
ound
s
FUEL ACCESSORIESFILTERS & ACCESSORIESNozzles - Aluminum Farm
Light weight Farm Nozzle is constructed of high tensile strength aluminum alloy. The 402 also features a zinc-plated steel lever and molded Buna-N disc seat and "O" rings. Ideal for electric pumps or gravity flow tanks. Inlet size 3/4" or 1", Tubes 13/16", Unleaded 15/16" Leaded. Seals - Buna-N. Weight 1 lb. 5 oz. EBW 402-300-01 3/4" STANDARD NOZZLEPartNo Description
EBW 402-300-02 1" STANDARD NOZZLEEBW 402-310-01 3/4" UNLEADED NOZZLEEBW 402-310-02 1" UNLEADED NOZZLE
Spout - Pour Boy Filler Spout
Multiple threads fit many containers. Flexible, durable spout for all fluids. Use for variety of applications.
CUSTER SPT200SC-POP POUR BOY SPOUTPartNo Description
ADHESIVES & SEALANTSAdhesivesIndustrial Adhesives - Pliobond
Pliobond 20 is an all-purpose, thermosetting adhesive which can be used to bond virtually all porous substrates. Provides bonds that toughen with age. Constant flexing, pulsing, or vibration over wide temperature extremes will not affect these cured bonds. Dielectric qualities of Pliobond 20 adhesives make them ideal for a wide variety of electrical applications.
RUS PBC-20 #20 1/2PT GOODYEAR PLIOBONDPartNo Description
RUS PC-220 #20 1PT GOODYEAR PLIOBONDRUS PC-320 #20 1QT GOODYEAR PLIOBOND
Loctite innovative gasketing products offer precise, reliable sealing whether applied manually or by the automated methods used in high volume assembly. •504: Orange, gap filling, low pressure seal. Fills gaps to .050". 250 ml tube. •510: Red, hi-temp (to 400°F), with excellent solvent resistance. 250 ml tube. •515: Purple, makes flexible gaskets for rigid material flanges. 50 and 300 ml tube. •518: Red, makes flexible gaskets for flexible metal/aluminum surfaces. 300 ml tube.
LOC 50441 #504 GASKET ELIMINATOR FLANGE SEALANTPartNo Description
LOC 51041 #510 GASKET ELIMINATOR FLANGE SEALANTLOC 51531 #515 GASKET ELIMINATOR FLANGE SEALANTLOC 51580 #515 GASKET ELIMINATOR FLANGE SEALANTLOC 51845 #518 GASKET ELIMINATOR FLANGE SEALANT
Makes high-performance, leak proof gaskets in one minute. Equipment can be returned to service immediately. Blowout resistant and outperforms precut gaskets. Increased Oil Resistance. Non-Corrosive Sealing Time - Operating strength 15 psi - 1 min. -75° to 500°F temperature resistance. Black color. LOC 30684 4 OZ. CANPartNo Description
LOC 30509 5 OZ. CARTRIDGELOC 30507 7 OZ. CAN
Neutral curing and non-corrosive. For aluminum, concrete, electrical applications. Temperature resistant to 400ºF continuous service, 500ºF intermittent. TT-S-00230C Type II. TT-S-001543A, Class A.
LOC 59330 80 ML TUBE BLACKPartNo Description
LOC 59375 300 ML CARTRIDGE BLACKLOC 30563 7.25 OZ. CAN BLACKLOC 59530 80 ML TUBE CLEARLOC 59575 300 ML CARTRIDGE CLEARLOC 30562 7.25 OZ. CAN CLEARLOC 59430 80 ML TUBE WHITELOC 59475 300 ML CARTRIDGE WHITELOC 82518 7.25 OZ. CAN WHITE
GasketingGasket Elimator - Loctite Anaerobic GasketingProducts
Gasket - Loctite Instant Gasket
Silicone Adhesive Sealants - LoctiteSuperflex™ RTV
Phone: 402-455-6151Toll Free: 800-488-9699
556
Lubrication, Pumps & Compounds
ADHESIVES & SEALANTSGasketingSilicone Adhesive Sealants - LoctiteSuperflex™ Blue RTV
Cures to a tough, flexible rubber. Makes reliable "formed-in-place" gaskets that resist shrinking, cracking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -60ºF to 500ºF intermittent. Fills gaps to .25 inch. Blue color.
LOC 30560 80ML TUBEPartNo Description
LOC 30533 300ML CRTLOC 30541 7.25 OZ. CANLOC 30518 12 OZ. TUBE
Silicone Adhesive Sealant - LoctiteSuperflex™ Red High Temp RTV
Makes gaskets that resist temperatures to 600ºF intermittent. Resists aging, weather and thermal cycling without shrinkage, cracking, hardening. Fills gaps to .25 inch. Color red.
LOC 59630 80ML TUBEPartNo Description
LOC 59675 300ML CRTLOC 30564 7.25 OZ. CANLOC 82279 12 OZ. TUBE
Silicone Gasket Maker - Loctite Ultra Black®RTV
Retains high flexibility and oil resistance for longer gasket life. Temperature range -75ºF to 625ºF intermittent. Low odor, non-corrosive, low volatility. Resistant to most chemicals and solvents. Fills gaps to .25". Color black.
LOC 59830 70 ML TUBEPartNo Description
LOC 59875 300 ML CARTRIDGELOC 59866 8.75 OZ. CANLOC 59891 49 LB. PAIL
Forms tough, flexible gaskets directly on flange. Low odor, non-corrosive, low volatility. Withstands temperatures to 500ºF intermittent. Resistant to most chemicals and solvents. Excellent oil resistance. Fills gaps to .25". Color blue.
LOC 58730 70ML TUBEPartNo Description
LOC 58775 300ML CRTLOC 30567 8.75 OZ. CANLOC 58791 17 LITER PAIL
Remains flexible and withstands high vibration. Designed for high-torque applications. Withstands temperatures from -75°F to 625°F. Outstanding oil and shop fluid resistance. Non-corrosive, low odor, Oil-resistant. Tack free, 30 min. - full strength 24 hours. Color grey.
LOC 18718 70 ML TUBEPartNo Description
LOC 18581 300 ML CARTRIDGE
Fast drying, metallic copper sealant helps disspate heat, prevent gasket burnout and improve heat transfer. Fills hot spots and surface imperfections. Temperature range -65ºF to 700ºF. Resists shop fluids. Non-corrosive. Oil resistant. Color copper.
LOC 30542 70 ML TUBEPartNo Description
LOC 82046 300 ML CARTRIDGE
Silicone Gasket Maker - Loctite Ultra Blue®RTV
Silicone Gasket Maker - Loctite Ultra Grey®
Silicone Gasket Maker - Loctite Ultra Copper®RTV
Phone: 402-455-6151Toll Free: 800-488-9699
557
Lubri
catio
n, Pu
mps &
Comp
ound
s
ADHESIVES & SEALANTSGasketingAviation Gasket Sealant - Loctite
Reliable liquid gasket sealant, dressing and coating. Thin, brushable dressing or sealer for close-fitting parts. Use to 400ºF. Resistant to gasoline and other solvents. Tested to MIL-S-45180 D. Oil Resistant. Non-corrosive. Color - Dark reddish brown. LOC 30517 .25PT BRUSH CANPartNo Description
LOC 30516 1PT BRUSH CAN
Gasket Sealant - Loctite #1
Reliable paste-like gasket sealant/dressing, coating. Sets quickly to a hard set and is recommended for rigid, permanent assemblies. Use to 400ºF. Resistant to gasoline and other solvents. Tested to MIL-S-45180 D. Applications: Coating cut gaskets to improve sealing and hold in place. Oil resistant. Non-corrosive. Color - Reddish brown.
LOC 30510 1.5 OZ. TUBEPartNo Description
LOC 30511 3 OZ. TUBELOC 30512 7 OZ. TUBE
Gasket Sealant - Loctite #2
Reliable paste-like gasket sealant/dressing/coating. Sets more slowly to a pliable film best suited for non-rigid, vibrating assemblies. Use to 400ºF. Resistant to gasoline and other solvents. Tested to MIL-S-45180D. Remains tacky. Applications: Coating cut gaskets to improve sealing and hold in place. Oil resistant. Non-corrosive. Color - Black.
LOC 30513 1.5 OZ. TUBEPartNo Description
LOC 30514 3 OZ TUBELOC 30515 7 OZ TUBELOC 80964 5 GAL. CAN
Red colored liquid sealant that holds gaskets in place during assembly. Seals and bonds rubber, cork, paper, felt, metal, and asbestos gaskets. Sets quickly to a very tacky film. Suitable to 500ºF. Contains no ozone-depleting compounds. Non-corrosive - increased. Sealing time is 5 minutes. LOC 30524 1/4 PT. BRUSH CANPartNo Description
LOC 30525 1 PT. BRUSH CANLOC 30526 9 OZ. AEROSOL
Fast drying, metallic copper sealant helps dissipate heat, prevent gasket burnout and improve heat transfer. Fills hot spots and surface imperfections. Temperature range -50° to 500°F. Resists shop fluids. Oil Resistant - remains tacky. Non-corrosive. Color - Copper. LOC 30535 9 OZ. AEROSOLPartNo Description
Free of Methylene Chloride, Chisel® MC-FREE Gasket Remover has a foaming action that lifts off gaskets from any type of assembly in minutes. Performs better than Methylene Chloride formulations on silicone gaskets and removes most spray paints from steel. Drying Time: Leave on surface 5-10 minutes. Wipe/scrape clean. Oily reidue. Aerosol
LOC 34663 15.25 OZ CHISEL GASKET RMVRPartNo Description
Neutral curing and non-corrosive. For aluminum, concrete, electrical applications. Temperature resistant to 400°F continuous service, 500°F intermittent. Oil-resistant. Color - Clear.
LOC 51387 80 ML TUBEPartNo Description
LOC 51388 300 ML CARTRIDGE
Gasket Sealant - Loctite Hi-Tack
Gasket Sealant Spray - Loctite Copper
Gasket Remover - Loctite Chisel® MC-Free
Silicone - Loctite Superflex™ Non-CorrosiveRTV
Phone: 402-455-6151Toll Free: 800-488-9699
558
Lubrication, Pumps & Compounds
Anti-Seize - Loctite ProductsAnti-Seize - C5-A® Copper Based Exclusive formula suspends copper and graphite in a high quality grease. Protects metal parts from rust, corrosion, galling, and seizing at temperatures to 1800°F (982°C). Tested to MIL-PRF-907-E. KValue=0.16. NOTE: Other styles and sizes of Loctite anti-seize product are available.
LOC 51147 8 OZ.BRUSH-TOP,C5-A COPPER ANTI-SEIZEPartNo Description
LOC 51004 13 OZ.CARTIDGE,C5-A COPPER ANIT-SEIZELOC 51007 1-LB BRUSH-TOP. C5-A COPPER ANTI-SEIZE
Anti-Seize - Silver GradeHeavy duty, temperature resistant, petroleum-based lubricant compound fortified with graphite and metallic flake. Inert, will not evaporate or harden in extreme cold or heat. For use in assemblies up to 1600°F (871°C). Tested to MIL-PRF-907E. KValue=0.18. Silver color. Approved by the American Bureau of Shipping.
LOC 76732 8 OZ. BRUSH-TOP ANTI-SEIZE LUBRICANTPartNo Description
LOC 76764 1-LB. BRUSH-TOP ANTI-SEIZE LUBRICANT
Anti-Seize - NickelCopper-free. Recommended for stainless steel and other metal fittings. For preventing corrosion, seizing, and galling in harsh, chemical environments, and temperatures to 2400°F (1315°C). KValue=0.13. Silver color. Approved by the American Bureau of Shipping. NOTE: Other styles and sizes of Loctite anti-seize products are available. Please contact our sales dept. for assistance.
LOC 77124 8 OZ. BRUSH-TOP NICKEL ANTI-SEIZEPartNo Description
LOC 77164 1-LB. BRUSH-TOP NICKEL ANTI-SEIZE
Anti-Seize - Food Grade Prevents seizure, galling, and friction in stainless steel and other metal parts up to 750°F (400°C). Kvalue=.013. White color. NOTE: Other styles and sizes of Loctite anti-seize products are available. Please contact our sales dept. for assistance.
LOC 51168 8 OZ. BRUSH-TOP FOOD GRADE ANTI-SEIZEPartNo Description
LOC 51170 2-LB. BRUSH-TOP FOOD GRADE ANTI-SEIZE
Anti-Seize - N-7000 High Purity Metal-free formulation provides high levels of purity and excellent lubricating properties. For Class 1, 2 and 3 power plant hardware. Temperature resistant to 2400°F (1315°C). KValue=0.16. Silver color. NOTE: Other styles and sizes of Loctite anti-seize products are available. Please inquire.
LOC 51272 8 OZ. BRUSH-TOP N-7000 NUCLEAR GRD ANTI-SEIZEPartNo Description
LOC 51270 1-LB. BRUSH-TOP N-7000 NUCLEAR GRD ANTI-SEIZELOC 51273 2-LB. BRUSH-TOP N-7000 NUCLEAR GRD ANTI-SEIZE
A high strength, room-temperature-curing adhesive used to join fitted cylindrical parts. Temp range is -65° to 300°F (54° to 140°C). It fixtures in 10 minutes and provides a shear strength of 4,000 psi after 24 hours. Capable of filling diametral gap distances up to 0.015" (0.27mm). Green liquid color. LOC 68015 10 ML BTL 680 HI STRGTH RET COMPPartNo Description
LOC 68035 50 ML BTL 680 HI STRGTH RET COMPLOC 68060 250 ML BTL 680 HI STRGTH RET COMP
Loctite® 55 is the newest technology in pipe sealing. When you need a fast, sure pipe seal, don't mess with tape, dope, or wicking. Get a quick, clean seal with new Loctite® 55 Pipe Sealing Cord. It's the one-step solution that makes sealing easier than ever. Press resistance 10,000 psig. Temp range up to 300°F (150"C). White coated cord.
LOC 35082 5,700 IN. PIPE SEALING CORD 55PartNo Description
Designed for both hydraulic and pneumatic systems, 545 contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2" (50mm) in diameter. Seals in 4 hours, Pressure resistance (psi) 10,000. Viscosity cP's 14,000. Temp range -65° to 300°F (-54° to 149°C). Purple color.
LOC 32429 10ML BTL 545 HYC/PNEU SEALANTPartNo Description
LOC 54531 50ML BTL 545 HYC/PNEU SEALANTLOC 54541 250ML BTL 545 HYC/PNEU SEALANT
ADHESIVES & SEALANTS
Thread Sealant - Loctite 545Hydraulic/Pneumatic
Phone: 402-455-6151Toll Free: 800-488-9699
559
ADHESIVES & SEALANTSRetaining Compound – Loctite 680 High Strength
Sealing Cord – Loctite® 55 Sealing Cord
Lubri
catio
n, Pu
mps &
Comp
ound
s
ADHESIVES & SEALANTSThread Sealant - Loctite 567 PST®
A high performance sealant that locks and seals metal, tapered pipe threads, and fittings. Ideal for stainless steel, aluminum, galvanized metal, and other inert metals. 567 has excellent solvent resistance, allows easy assembly and prevents galling. Seals stainless steel in 3 hours and carbon steel in 30 minutes. Pressure resistance (psi) 10,000. Viscosity cP's 540,000. Temp range -65° to 400°F (-54° to 204°C). White paste color. LOC 56707 6ML TUBE 567 THREADSEALANT PSTPartNo Description
LOC 56747 50ML TUBE 567 THREADSEALANT PSTLOC 56765 250ML TUBE 567 THREADSEALANT PSTLOC 33241 16 OZ. BRUSH CAN 567 THREADSEALANT PST
Thread Sealant Slow Cure - Loctite 592 PST®
Locks and seals threaded fittings. Parts may be repositioned up to 24 hours after application. Seals in 24-48 hours. Pressure resistance (psi) 10,000. Viscosity cP's 350,000. Temp range -65° to 400°F (-54° to 204°C). White color. LOC 59231 50ML TUBE,THREAD SEALANT 592PartNo Description
LOC 59241 250ML TUBE, THREAD SEALANT 592
Thread Sealant with Teflon® - Loctite
A general purpose sealant with the added lubricity of Teflon® for metal pipes. Won't shred like Teflon® tape and allows easy disassembly. Resists common shop fluids. Pressure resistance (psi) 5,000. Temp range -60° to 300°F (-51° to 149°C). White paste color.
LOC 30534 .25 PT BRUSH CAN, THRD SLNT W/TEFPartNo Description
LOC 30561 1PT BRUSH CAN,THRD SLNT W/TEFLON
Urethane impregnated fiberglass tape, activated by water, for reliable, temporary repairs of metal, plastic, and composite pipes. Includes Metal Magic Steel ™ epoxy stick and gloves. Cures in 30 minutes. Max temp resistance-250°F. Yellow color. LOC 96321 PIPE REPAIR KIT 2"X6’ TAPEPartNo Description
LOC 96322 PIPE REPAIR KIT 4"X12’ TAPE
Tight® is a multi-purpose anaerobic gel that seals, locks, and retains. It seals against most liquids and gases and works well on coarse threads, large gaps, and all overhead applications. Max temp resistance-300°F. Blue gel color. LOC 51604 50ML TUBE, TIGHT ANAEROBICPartNo Description
LOC 51642 250ML TUBE, TIGHT ANAEROBIC
The original elastomer-modified instant adhesive. Bonds metal, rubber, and plastic. Excellent peel, impact, and shear strength. Typically used for close fitting parts. Fixture cures in 90 sec. Fully cured in 24 hours. Temp range -65° to 225°F. Black color. NOTE: Please call for more information on other adhesives not shown.
LOC 38004 3 GM TUBE BLK MAX 380 ADHSVPartNo Description
LOC 38050 1 OZ BTL BLK MAX 380 ADHSVLOC 38061 1 LB BTL BLK MAX 380 ADHSV
A general purpose instant adhesive for general maintenance and repair. Excellent for rubber bonding. Fixture cures in 30 sec. Fully cured in 24 hours. Temp range -65° to 180°F. Clear color. NOTE: Please call for more information on other adhesives not shown.
LOC 46551 1/3OZ BTL 404 QUICKSET ADHESIVEPartNo Description
LOC 46548 4 OZ BTL 404 QUICKSET ADHESIVELOC 46561 1 LB BTL 404 QUICKSET ADHESIVE
Special Products - Loctite Pipe Repair Kit - Loctite
Loctite Pro Lock ™ Tight®
Bonding Cyanoacrylate Adhesives - Loctite Adhesive Instant - Loctite 380 Black Max®Toughened
Adhesive Instant - Loctite 404 Quick Set™
Phone: 402-455-6151Toll Free: 800-488-9699
560
Lubrication, Pumps & Compounds
ADHESIVES & SEALANTSBonding Cyanoacrylate Adhesives - Loctite Adhesive Instant - Loctite 495 Super Bonder®
A general purpose adhesive designed to bond rubber, metal, and plastic parts with gaps to .004". Fixture cures in 20 sec. Fully cured in 24 hours. Temp range -65° to 180°F. Clear color. NOTE: Please call for more information on other adhesives not shown. LOC 49595 .07 FL OZ GLUE PEN 495 SUPR BNDR ADHSVPartNo Description
LOC 49504 3 GM TUBE 495 SUPR BNDR ADHSVLOC 49550 1 OZ BTL 495 SUPR BNDR ADHSVLOC 49561 1 LB BTL 495 SUPR BNDR ADHSV
Epoxy - Loctite Fixmaster® Fast Cure PoxyPak™
This fast cure, high strength, thick liquid reaches handling strength in 4-6 minutes. Bonds virtually any material to repair, fill, and seal holes, cracks, and worn surfaces. Fixture cures in 4-6 minutes. Fully cured in 1hours. Adhesive Tensile shear psi 2300. Temp resistance 300°F. Clear color. Approved by the American Bureau of Shipping. LOC 81120 1 FL OZ SYRINGE FAST CURE POXY PAKPartNo Description
Epoxy- Loctite Fixmaster® Steel Putty
Steel filled, non-sagging, two-part epoxy that cures to a metal-like finish for rebuilding or repairing metal parts. Work time 30 minutes. Function cure in 6 hours. Tensile strength psi 4900. Max operation temp 225°F. Grey color. Approved by the American Bureau of Shipping.
LOC 99913 1lb STEEL PUTTY KIT 0.3PartNo Description Cover,Ft @
1/4"Thick
LOC 99914 4lb STEEL PUTTY KIT 1.2
Threadlocker Liquid - Loctite 242® MediumStrengthA general purpose, removable threadlocker for fasteners between 1/4" and 3/4" (6 to 20 mm) diameters. Controlled lubricity for accurate clamp loads. Parts can be separated using hand tools. Fixture cures in 10 minutes @ 25°C. Fully cured in 24 hours @ 25°C. Temp range -65° to 300°F. Blue color. NOTE: Please call for more information on other threadlockers not shown. LOC 24221 10ML BTL 242 THREADLOCKERPartNo Description
LOC 24231 50ML BTL 242 THREADLOCKER
LOC 24241 250ML BTL 242 THREADLOCKERPartNo Description
A permanent threadlocker for fasteners up to 3/4" (20 mm) diameter. High lubrication for easy assembly. Excellent for preventing rust and corrosion in extreme chemical/environmental conditions. Fixture cures in 5 minutes @ 25°C. Fully cured in 24 hours @ 25°C. Temp range -65° to 300°F. Red color. LOC 26221 10ML TUBE 262 PERM THREADLOCKERPartNo Description
LOC 26231 50ML BTL 262 PERM THREADLOCKERLOC 26241 250ML BTL 262 PERM THREADLOCKER
A high strength, low viscosity threadlocker for fasteners up to 1" (25 mm) diameter. Fixture cures in 10 minutes @ 25°C. Fully cured in 24 hours @ 25°C. Temp range -65° to 300°F. Red color. NOTE: Please call for more information on other threadlockers not shown. LOC 27121 10ML BTL 271THREADLOCKERPartNo Description
LOC 27131 50ML BTL 271THREADLOCKERLOC 27141 250ML BTL 271THREADLOCKER
Locks fasteners up to 1-1/2" (36 mm). Protects threads from rust and corrosion. Removable with heat and hand tools. Fixture cures in 60 minutes @ 25°C. Fully cured in 24 hours @ 25°C. Temp range -65° to 300°F. Red color. NOTE: Please call for more information on other threadlockers not shown. LOC 21434 10ML BTL 277 THREADLOCKERPartNo Description
LOC 27731 50ML BTL 277 THREADLOCKERLOC 27741 250ML BTL 277 THREADLOCKER
A medium strength threadlocker for pre-assembled bolts up to 1/2" (12 mm). Penetrates threads by capillary action. Secures set screws and other assemblies after settings are completed. Seals welds and porous metal parts. Protects threads from rust and corrosion. Fixture cures in 6 minutes @ 25°C. Fully cured in 24 hours @ 25°C. Temp range -65° to 300°F. Green color. LOC 29021 10ML BTL 290 THREADLOCKERPartNo Description
LOC 29031 50ML BTL 90 THREADLOCKERLOC 29041 250ML BTL 290 THREADLOCKER
Medium strength threadlocker eliminates loosening from vibration, shock, and thermal expansion. More reliable and cost effective than conventional mechanical fasteners. Prevents rust & corrosion while sealing and protecting threads. Removable with hand towel. Fixture cures in 10 minutes @ 70°F (22°C). Fully cured in 24 hours @ 70°F (22°C). Temp resistance 300°F (150°C). Breaks loose at 138lb of touque. Blue color.
LOC 37087 19 GRAM STICK THREADLOCKER, 248 MEDIUMPartNo Description
LOC 37684 9 GRAM STICK THREADLOCKER,248 MEDIUM
Threadlocker Liquid - Loctite 262 Medium toHigh Strength
Threadlocker Liquid - Loctite 271™ HighStrength
Threadlocker Liquid - Loctite 277 HighStrength
Threadlocker Liquid - Loctite 290 WickingGrade
Phone: 402-455-6151Toll Free: 800-488-9699
561
Threadlocker Sticks – Loctite 248 Medium Strength
Lubri
catio
n, Pu
mps &
Comp
ound
s
ADHESIVES & SEALANTSThreadlocker Stick - Loctite 268 High StrengthHigh strength threadlocker eliminates loosening from vibration, shock, and thermal expansion. More reliable and cost effective than conventional mechanical fasteners. Prevents rust & corrosion while sealing and protecting threads. Requires localized heat. Fixture cures in 10 minutes. Fully cured in 24 hours . Temp resistance 300°F (150°C). Breaks loose at 360lb of touque. Red color.
LOC 37686 19 GRAM STICK THREADLOCKER, 268 HIGHPartNo Description
LOC 37685 9 GRAM STICK THREADLOCKER, 268 HIGHThreadlocker Stick with Teflon® - LoctitePST® 561 Immediate low pressure sealing to 100 psi. Controlled lubricity prevents galling. Protects threaded areas from rust and corrosion. Provides exceptional fluid compatibility and chemical resistance. Will not contaminate or clog lines. Eases disassembly. Max pressure resistance 10,000 psi. Cures in 72 hours. Fully cured in 24 hours . Temp resistance 300°F (150°C). Breaks loose at 410lb of touque. White color. LOC 37127 19 GRAM STICK THREAD SEALANT PST 561PartNo Description
Anti-Seize Stick - Loctite C5-A® Copper Protects metal parts in high heat environments up to 1800°F. Prevents rust, corrosion, seizing, and eases disassembly. Reduces friction and wear to critical parts. Buttery texture ideal for both coarse and fine threads. Exceptional lubrication properties. K Value 0.164. Key specs MIL-PRF-907E. Copper color. LOC 37229 20 GRAM LUBRICANT STICK ,C5-A COPPER ANTI-SEIZEPartNo Description
Anti-Seize Stick - Loctite Silver GradeProtects metal parts in high heat environments up to 1600°F. Prevents rust, corrosion, seizing, and eases disassembly. Reduces friction and wear to critical parts. Buttery texture ideal for both coarse and fine threads. Exceptional lubrication properties. K Value 0.181. Key specs MIL-PRF-907E. Silver color.
LOC 37230 20 GRAM LUBRICANT STICK ,SILVER ANTI-SIEZEPartNo
Hand-kneadable ready-to-use stick for fast emergency repairs. Hardens like steel in 20 minutes. Can be machined, drilled and painted in 30 minutes. Plugs and seals leaks. Permanently fill gaps and holes in metal, concrete, wood, fiberglass and ceramics. Patches holes and cracks in pipes, drums and tanks. Can be used for underwater repairs.
LPS 60159 CS=36 4OZ STRONG STEEL STICKPartNo Description
Long-lasting formula gives tight weather-resistant seals to glass, metal, and ceramic surfaces. Will not crack, shrink, or peel. Can be applied to temperatures below freezing. 50 year limited warranty. Solvent clean up.
RED 0816/0I 10.1 OZ RED DEVIL WHT 100% SILICONEPartNo Description
RED 0816/6I 10.1 OZ RED DEVIL BLK 100% SILICONERED 0826/0I 10.1 OZ RED DEVIL CLR 100% SILICONE
Style 5889: •Non-abrasive. Pre-shrunk to avoid packing wear and shaft scoring. Soft, flexible but very nonporous. Excellent choice for high-speed rotary shaft service. Not recommended for chlorine service. Lattice braid continuous filament PTFE braid.
GAR 41891-1024 5889 3/8" GARLOCK TEFLON-1LBPartNo Description
GAR 41891-2032 5889 1/2" GARLOCK TEFLON-5LBGAR 41300-1012 8909 3/16" GAR REG BRD-1LBGAR 41300-1216 8909 1/4" GAR REG BRD-2LBGAR 41300-2016 8909 1/4" GAR REG BRD-5LBGAR 41300-1220 8909 5/16" GAR REG BRD-2LBGAR 41300-1224 8909 3/8" GAR REG BRD-2LBGAR 41300-2024 8909 3/8" GAR REG BRD-5LBGAR 41300-2032 8909 1/2" GAR REG BRD-5LBGAR 41300-3040 8909 5/8" GAR REG BRD-10LBGAR 41300-3048 8909 3/4" GAR REG BRD-10LBGAR 41300-3064 8909 1" GAR REG BRD-10LBGAR 41321-1216 8922 1/4" GAR LATTICE-2LBGAR 41321-1224 8922 3/8" GAR LATTICE-2LBGAR 41321-2032 8922 1/2" GAR LATTICE-5LB
Phone: 402-455-6151Toll Free: 800-488-9699
562
Call to Discuss Our
Integrated Supply Solutions 800-488-9699
Description
Strong Steel Stick Renewal Composite
Silicone Window and Door Sealant Red Devil
PTFE Packings and SYNTHEPAK® Packings
Lubrication, Pumps & Compounds
PAINT, SUPPLIES & EQUIPMENTSpray Paint - Plasti-Kote Economy-10 oz.Cans
Economy grade paint with excellent performance characteristics. Fast dry, high gloss coating for interior and exterior use. Tack free in 10 to 20 minutes; Thoroughly dry in less than an hour. Recoat within two hours or after 24 hours. Smooth finish requires no sanding or polishing. PLAKOT 2867N 10 OZ RED OXIDE PRIMERPartNo Description
PLAKOT 2868N 10 OZ GRAY PRIMERPLAKOT 2870N 10 OZ GLOSS BLK MARKINGPLAKOT 2871N 10 OZ FLAT BLACK-AERO MRKNGPLAKOT 2872N 10 OZ GLOSS WHITE MARKINGPLAKOT 2873N 10 OZ FLAT WHITEPLAKOT 2874N 10 OZ SWIFT RED MARKINGPLAKOT 2875N 10 OZ YELLOW MARKING AEROPLAKOT 2876N 10 OZ ASTRO BLUE AEROPLAKOT 2877N 10 OZ FOREST GREEN-AEROPLAKOT 2878N 10 OZ ORANGEPLAKOT 2880N 10 OZ ALUMINUMPLAKOT 2881N 10OZ DARK MACH GRAY AEROSOLPLAKOT 2884N 10 OZ SCHOOL BUS YELLOWPLAKOT 2885N 10 OZ ROYAL BLUEPLAKOT 2886N 10 OZ BLUE GRAYPLAKOT 2887N 10 OZ PINKPLAKOT 2892N 10 OZ ALMONDPLAKOT 2893N 10 OZ PARROT GREENPLAKOT 2894N 10 OZ OSHA PURPLEPLAKOT 2899N 10 OZ CAST IRON GRAY
Spray Paint - Spray Any Way EnamelFast dry. Sprays in any direction. Paints hard-to-reach areas faster. Delivers more paint per second, providing smoother, quicker coverage. Guaranteed not to clog or your money back. Completely empties in any position for more square foot coverage. Recoat anytime. Interior/exterior. Lead free. Provides excellent resistance to solvents and corrosion. 11 oz net wt cans. PLAKOT 2350N 16 OZ LT GRAY PRIMER A/WPartNo Description
PLAKOT 2351N 16 OZ RED OXIDE PRIMER A/WPLAKOT 2353N 16 OZ GLOSS BLACK A/W AEROPLAKOT 2355N 16 OZ FLAT BLK A/W AEROPLAKOT 2356N 16 OZ GLOSS WHITE A/W AEROPLAKOT 2358N 16 OZ FLAT WHITE A/W AEROPLAKOT 2359N 16OZ MACHINERY DARK GRAYPLAKOT 2360N 16 OZ MACH LT GRAY A/W AEROPLAKOT 2369N 16 OZ SAND A/W AEROPLAKOT 2370N 16 OZ CHESTNUT BROWN A/WPLAKOT 2373N 16 OZ VISTA GREEN A/W AEROPLAKOT 2380N 16 OZ SCHOOL BUS YEL A/WPLAKOT 2382N 16 OZ ALUMINUM A/W AEROPLAKOT 2385N 16 OZ OSHA BLUE A/W AEROPLAKOT 2386N 16 OZ OSHA GREEN A/W AEROPLAKOT 2387N 16 OZ OSHA YELLOW A/W AEROPLAKOT 2388N 16 OZ OSHA ORANGE A/W AEROPLAKOT 2389N 16 OZ OSHA RED A/W AEROPLAKOT 2391N 16 OZ CL ACRYLIC A/W AEROPLAKOT 2390N 11 OZ OSHA PURPLE A/W AERO
Primer - Plasti-Kote Zinc Chromate PrimerAdjustable fan spray valve. Meets military specification: TT-P-1757A, type II. For aluminum, magnesium, and other non-ferrous metals. 12 oz. net wt can. PLAKOT 2805N ZINC CHROMATE GREENPartNo Description
Plastic-Kote's zinc rich cold galvanizing coating is zinc dust pigment suspended in a superior performing epoxy resin. 92% of the pigment is pure zinc. It dries fast and has excellent abrasion, solvent and corrosion resistance. Plasti-Kote zinc rich cold galvanizing primer. PLAKOT 2470N 14.5 OZ GRAY COLD GALV PRIMPartNo Description
All Plasti-Kote industrial fluorescent paints are formulated at the highest pigmentation levels possible to provide maximum visibility. Available in brilliant coloreds in a 16 ounce can. Plasti-Kote fluorescents dry quickly. May be top coated with clear lacquer for maximum durability. Use to identify hazards or to mark safety equipment. 16 oz cans. PLAKOT 2971N FLUORESCNT GREEN-AEROPartNo Description
PLAKOT 2973N FLUORSCNT ORANGE-AEROPLAKOT FL6 FLUORESCENT RED AEROPLAKOT FL8 FLUORESCENT HOT PINK
Drys fast and can be recoated anytime. Superior performance. Excellent corrosion, abrasion, fade and heat resistance. Use on wood or metal. Thoroughly dry in 30-45 minutes. 11 oz. net wt. Can.
PLAKOT 2750N LT GRAY PRIMERPartNo Description
PLAKOT 2751N RED OXIDE PRIMERPLAKOT 2753N OSHA GLOSS BLACKPLAKOT 2760N MACH LIGHT GRAY-AEROPLAKOT 2766N BABY BLUEPLAKOT 2770N CHESTNUT BROWN AEROPLAKOT 2784N GOLD-AERO ALL PURPOSE
Sprays upside down. Fast dry time - 5-10 minutes. Formulated for high traffic areas. One coat coverage. "T" shape non-clogging nozzle. 17 oz. net wt can.
PLAKOT 11703 WHITE U/D TRAFFICPartNo Description
PLAKOT 11704 YELLOW U/D TRAFFIC
PRIMER - PLASTI-KOTE ZINC RICH FORCOLD GALVANIZING
Spray Paint - Plasti-Kote Fluorescent
Paint - Plasti-Kote All Purpose Enamel
Paint - Plasti-Kote Traffic Striping Paint
Phone: 402-455-6151Toll Free: 800-488-9699
563
Call 800-488-9699 to Schedule Your Associates For Our Safety Seminars.
Lubri
catio
n, Pu
mps &
Comp
ound
s
PAINT, SUPPLIES & EQUIPMENTPaint - Rust-Oleum® High PerformanceRust-Oleum Industrial Enamel AerosolHardHat® V2100/2200 System
The ultimate spray paint for metal. Maximum corrosion protection. Fast dry. Better gloss retention, coverage and dry time than other industrial rust-preventive spray paints. Superior resistance to chipping, cracking and peeling. Higher paint solids. Superior coverage. 15 oz net wt can. RUST V2170838 ALMONDPartNo Description
RUST V2171838 TANRUST V2175838 CHESTNUT BROWNRUST V2125838 DEEP BLUERUST V2123838 LIGHT BLUERUST V2137838 DARK GREENRUST V2134838 BRIGHT GREENRUST V2138838 HUNTER GREENRUST V2147838 INDUSTRIAL YELLOWRUST V2148838 EQUIPMENT YELLOWRUST V2156838 EQUIPMENT ORANGERUST V2164838 BRIGHT REDRUST V2124838 SAFETY BLUERUST V2133838 SAFETY GREENRUST V2155838 SAFETY ORANGERUST V2167838 SAFETY PURPLERUST V2163838 SAFETY REDRUST V2143838 SAFETY YELLOWRUST 2233838 FLUORESCENT GREENRUST 2255838 FLUORESCENT ORANGERUST 209568 FLUORESCENT PINKRUST 2264838 FLUORESCENT REDRUST 2242838 FLUORESCENT YELLOWRUST 209565 ANODIZED BRONZERUST V2187838 DARK MACHINE GRAYRUST V2184838 DOVE GRAYRUST V2183838 LIGHT MACHINE GRAYRUST V2188838 SMOKE GRAYRUST V2115838 SILVER ALUMINUMRUST V2119838 STAINLESS STEELRUST V2179838 GLOSS BLACKRUST V2178838 FLAT BLACKRUST V2177838 SEMI-GLOSS BLACKRUST V2190838 FLAT WHITERUST 209567 SEMI-GLOSS WHITERUST V2192838 GLOSS WHITERUST V2196838 FLEET WHITERUST V2102838 CRYSTAL CLEARRust-Oleum Industrial Enamel PrimerAerosolHard Hat® V2100 System PrimersBetter corrosion protection than other industrial rust-preventive spray primers. Fast-drying, topcoat any time. Superior adhesion - use on rusted, bare or previously painted metal. 15 oz net wt can. RUST V2169838 RED PRIMERPartNo Description
RUST V2182838 GRAY PRIMERRUST 209566 WHITE CLEAN METAL PRIMER
A multi-purpose spray paint for everyday industrial applications. Fast dry - in 12 minutes or less. High-solids content provides faster, further coverage. Protects against chipping, fading and peeling. Higher gloss than lacquer-based aerosols. 12 oz net wt can.
RUST 1672830 ALMONDPartNo Description
RUST 1671830 BEIGERUST 1674830 LEATHER BROWNRUST 1626830 TRUE BLUERUST 1622830 REGAL BLUERUST 1638830 HUNTER GREENRUST 202211 MACHINE GREENRUST 1643830 SCHOOL BUS YELLOWRUST 202212 SUN YELLOWRUST 202216 DUSTY PINKRUST 1666830 BANNER REDRUST 1664830 CHERRY REDRUST 1624830 SAFETY BLUERUST 1633830 SAFETY GREENRUST 1653830 SAFETY ORANGERUST 1670830 SAFETY PURPLERUST 1660830 SAFETY REDRUST 1644830 SAFETY YELLOWRUST 1655830 FLUORESCENT RED-ORANGERUST 1632830 FLUORESCENT GREENRUST 1654830 FLUORESCENT ORANGERUST 1659830 FLUORESCENT PINKRUST 1642830 FLUORESCENT YELLOWRUST 1686830 UNIVERSAL GRAYRUST 1684830 DOVE GRAYRUST 1688830 SMOKE GRAYRUST 202214 MACHINERY GRAYRUST 1614830 DULL ALUMINUMRUST 1679830 GLOSSY BLACKRUST 1676830 ULTRA-FLAT BLACKRUST 1678830 SEMI-FLAT BLACKRUST 1692830 GLOSSY WHITERUST 1690830 FLAT WHITERUST 1696830 ANTIQUE WHITERUST 1610830 CRYSTAL CLEAR
Provides a solid base for adhesion of topcoat. Wet or dry sandable. Fast-drying, indoor/outdoor. Use on bare or painted wood, metal, masonry and more. 12 oz net wt can.
RUST 1667830 RED PRIMERPartNo Description
RUST 1680830 GRAY PRIMERRUST 1681830 WHITE PRIMERRUST 202213 GREEN RUST INHIBITIVE PRIMER
Paint - Industrial Choice® by Rust-Oleum®Industrial Choice Enamel Aerosol
Industrial Choice Enamel Primer Aerosol
Phone: 402-455-6151Toll Free: 800-488-9699
564
Lubrication, Pumps & Compounds
COOLANTS, METALWORKINGCHEMICALSCutting FluidsMETALWORKING FLUIDS - CIMCOOL®
Milacron's Metalworking Fluids… Total process improvements! Since 1945, Milacron has been internationally recognized as an industry leader with high performance CIMCOOL® Metalworking Fluids and CIMFORM® Grinding Wheels. Combining these technically superior products wit a "Total Process Improvement" approach yields high productivity and lower cost. Just what you need to be competitive in today's environment. CIMCOOL® Customers Can "Count on CIMCOOL" Products for All Their Machining and Grinding Applications. CIMCLEAN/CIMGUARD® Production Cleaners and Corrosion Inhibitors. MILPRO® Discover the Advantages of These Premium Oils For Your Plant! MILFORM®/MILDRAW® Formulations Covering a Wide Variety of Metalforming Applications. CIMVANTAGE® We Focus on Your Process Cost.
MILMAR 662504-031-55 CIMSTAR 60LF, BLUE, 55 GAL. SEMI-SYNTHPartNo Description
MILMAR 662504-034-40 CIMPERIAL 1060CF, UNDYED DISPOSABLE TOTESOLUBLE OIL
MILMAR 662504-048-05 CIMSTAR 540, PINK, 5 GAL SEMI-SYNTHMILMAR 662504-048-55 CIMSTAR 540, PINK, 55 GAL SEMI-SYNTHMILMAR 662504-061-05 CIMPERIAL 1070, BLUE,5 GAL SOLUBLE OILMILMAR 662504-061-55 CIMPERIAL 1070,BLUE,55 GAL SOLUBLE OILMILMAR 662504-168-5 QUANTALUBE 270XL,5 GAL, METALWORKING FLUIDMILMAR 662504-190-05 CIMTECH 95, PINK, 5 GAL SYNTHETICMILMAR 662504-190-55 CIMTECH 95, PINK, 55 GAL SYNTHETICMILMAR 662504-213-55 MILFORM 950, 55 GAL, STAMPING FLUIDMILMAR 662504-220-05 CIMSTR QUALSTAR XL, PINK 5 GAL. SEMI-SYNTHMILMAR 662504-220-55 CIMSTR QUALSTAR XL, PINK 55 GAL SEMI-SYNTHMILMAR 662504-274-05 CIMSTAR 3890,UNDYED,5-GAL. SEMI-SYNTHMILMAR 662504-274-55 CIMSTAR 3890,UNDYED,55-GAL. SEMI-SYNTHMILMAR 662504-298-05 CIMTECH 410C, BLUE, 5 GAL., SYNTHETICMILMAR 662504-298-55 CIMTECH, 410C, BLUE, 55 GAL, SYNTHETICMILMAR 662504-300-05 CIMGUARD 10 UNDYED 5 GAL CORROSION
PREVENTATIVEMILMAR 662504-303-55 CIMGUARD 20, UNDYED 55 GAL CORROSION
PREVENTATIVEMILMAR 662504-308-55 CIMSTAR 3865 UNDYED 55 GAL SEMI SYNMILMAR 662504-391-05 CIMTECH 495, BLUE, 5 GALLON SYNTHETICMILMAR 662504-401-73 COMPOUND, CIMTAP TAPPING 16 OZ. CANMILMAR 662504-403-72 CIMTAP II, TAPPING COMPOUND 16 OZ. SQUEEZE BTL.MILMAR 662504-438-55 MILFORM 1920M,UNDYED,55GAL STAMPING FLUIDMILMAR 662504-504-75 Q LUBRICANT 1 GAL. JUGMILMAR 662504-525-02 GROTAN BIOCIDE 45 LB. PAILMILMAR 662504-540-55 ADDITIVE, INHIBITOR 56, CORROSION CONTROL, 55
GAL.MILMAR 662504-558-05 ANTIFOAM NS 5 GAL. PAIL, DEFOAMERMILMAR 662504-560-05 ADDITIVE 63, 5 GAL, PH ADJUSTER
MILMAR 662504-605-05 CIMCLEAN 30, PINK, 5 GAL CLEANER
PartNo Description
MILMAR 662504-605-75 CIMCLEAN 30, PINK, 1 GAL CLEANERMILMAR 662504-609-55 CIMCLEAN 30, UNDYED 55GAL CLEANERMILMAR 662504-627-05 CIMSTAR 55, PINK, 5 GAL. SEMI-SYNTHMILMAR 662504-627-55 CIMSTAR 55, PINK, 55 GAL. SEMI-SYNTHMILMAR 662504-628-40 CIMSTAR 55,BLUE,220G DISPOSABLE TOTE SEMI-SYNTHMILMAR 662504-641-55 830CF MILPRO STRAIGHT OIL, 55 GALMILMAR 662504-893-05 CIMSTAR 40B, PINK, 5 GAL. SEMI-SYNTHMILMAR 662504-893-55 CIMSTAR 40B, PINK, 55 GAL. SEMI-SYNTHMILMAR 662504-910-05 CIMCLEAN FC79, UNDYED, 5 GAL CLEANERMILMAR 662504-910-55 CIMCLEAN FC79,UNDYED 55 GAL CLEANER
Oil-based formula. For lapping areas where oil base lubricants provide faster cutting action. Absorbs more abraded material. Self-lubricating. 5 gram syringes.
ENGIS 15-OS-30-MA SYRINGE STRONG DIAMONDCOMPOUND BROWN
10-20 1,200
PartNo Description Micron SizeRange
Approx. MeshSize
Comparison
ENGIS 9-OS-40-MA MEDIUM DIA COMPOUND RED 5G TUBE 6-12 1,800ENGIS 6-OS-375-MA STANDART DIA COMPOUND YELLOW
5G TUBE4-8 3,000
ENGIS 3-OS-35-MA STRONG DIA COMPOUND GREEN 5GTUBE
2-4 8,000
Manifold Block & Mounting Bracket (A)
CEDIND 8550-121 PACK OF 1 SETPartNo Description
CEDIND 8550-140 BAG OF 6 SETS
Cutting Fluids - Hyprez OS DiamondCompounds
MANIFOLD KIT ACCESSORIES - CEDARBERGSP-LOC SYSTEMS
Phone: 402-455-6151Toll Free: 800-488-9699
565
Lubri
catio
n, Pu
mps &
Comp
ound
s
COOLANTS, METALWORKINGCHEMICALSMANIFOLD KIT UNIVERSAL - CEDARBERGSP-LOC SYSTEMS
Kit Includes: 1 Manifold Block 1 1/2" NPT Plug 1 Mounting Bracket 3 3/8" NPT Tee 1 1/2" Female x 1/2" NPT Male Connector 3 3/8" NPT Close Nipple 1 1/2" NPT Ball Valve 2 1/4-20 Hex Head Screw 2 1/2" NPT Close Nipple 2 1/4-20 Hex Head Nu CEDIND 8550-116 UNIVERSAL MANIFOLD KITPartNo Description
Pipe Fittings - SP-LOC SYSTEMS(B) Close Nipple Fittings (C) Reducer Bushing (D) Tees 3/8" NPT (E) Plugs
CEDIND 8525-115 1/4" NPT CLOSE NIPPLE - PAC OF 4PartNo Description
CEDIND 8525-135 1/4" NPT CLOSE NIPPLE - BAG OF 25CEDIND 8537-101 3/8" NPT CLOSE NIPPLE - PAC OF 4CEDIND 8537-109 3/8" NPT CLOSE NIPPLE - BAG OF 25CEDIND 8550-118 1/2" NPT CLOSE NIPPLE - PAC OF 4CEDIND 8550-138 1/2" NPT CLOSE NIPPLE - BAG OF 25CEDIND 8537-103 3/8" NPT TO 1/4" NPT - PAC OF 4CEDIND 8537-111 3/8" NPT TO 1/4" NPT - BAG OF 25CEDIND 8537-100 TEES 3/8" NPT - PAC OF 1CEDIND 8537-108 TEES 3/8" NPT - BAG OF 6CEDIND 8537-102 3/8" NPT PLUG - PAC OF 4CEDIND 8537-110 3/8" NPT PLUG - BAG OF 25CEDIND 8550-119 1/2" NPT PLUG - PAC OF 4CEDIND 8550-139 1/2" NPT PLUG - BAG OF 25
SkimmersSidewinder - Zebra
Reaches up to 8 feet for one price. The remedy for access-impaired coolant sumps. Zebra Sidewinder fits anywhere, even on a totally enclosed machine. Mounts in minutes, and is easy to move from machine to machine. Uses a continuous O-ring that can be customized. ZEBSKI ZVA7-08 ZEBRA TRAMP OIL SKIMMERPartNo Description
New technology disk skimmer. Skim oil, not coolant. Our smart skimmer increases coolant life. It discriminates between oil and coolant at the site. An integrated gravity-separator returns clean coolant back to the sump where it belongs. ZEBSKI GS4H300 10" DISK SKIMMER W/GRAVITY SEPARATOR AND
MOTORPartNo Description
ZEBSKI GS4H460 18" DISK SKIMMER W/GRAVITY SEPARATOR ANDMOTOR
ZEBSKI GS4H610 24" DISK SKIMMER W/GRAVITY SEPARATOR ANDMOTOR
Conventional skimmer with a flair for efficiency. A novel engineering approach allows us to make L series units with smaller footprints, so they're easier to install. Rated at 1 to 5 gallons per hour. Disk and wipers are guaranteed for life. Surge-protection.
ZEBSKI LH300 DISK SKIMMER - 12"PartNo Description
ZEBSKI LH460 DISK SKIMMER - 18"ZEBSKI LH610 DISK SKIMMER - 24"
Zebra B series skimmers are ideal for lifting tramp oils large vertical distances, from 8 inches to 10 feet. Our standard design features a fixed lower pulley, reducing maintenance and eliminating belt vibrations. Cogged belts don't slip and last for years.
ZEBSKI BPF1-08 POLY BELT SKIMMER - 8" REACHPartNo Description
Disk Skimmers - Zebra GS
Phone: 402-455-6151Toll Free: 800-488-9699
566
Disk Skimmers – Zebra L Series
Belt Skimmer – Zebra
Lubrication, Pumps & Compounds
COOLANTS, METALWORKINGCHEMICALSOxygenators - Zebra
The Oxygenator is an economical approach to extending coolant life. In the absence of oxygen anaerobic bacteria multiply, causing coolant to spoil. Injecting oxygen into coolant maximizes performance by killing anaerobic bacteria and encouraging the goodaerobic bacteira. 2 air ports. 5000 cc air min. ZEBSKI XBUB5000 LARGE OXYGEN INJECTOR FOR 25 TO 50 GAL SUMPPartNo Description
Coolants last longer with constant circulation. Low cost - small size - make it ideal for most sumps.
ZEBSKI FXP5 CIRCULATION PUMP FOR COOLANT SUMPPartNo Description
Pump-Porportioning - Zebra
Absolute mixing precision. Compact - few moving parts. Can be permanently mounted. Pump uses water to force an exact amount of concentrate into the water system. Mixes 4-7 gallons per minute. Water pressure: 10-75 psi; Temperature -40° to 130°F.
ZEBSKI MIXPP518 PROPORTIONING PUMP,3/4"NPT ENDSPartNo Description
Optical refractometers measure coolant concentration. Green rubber sleeve is diamond knurled for easy gripping. Comfortable eyepiece with adjustable focus. Large prism aperture lets a lot of light in. ZEBSKI OPT10 BASIC 0-10%PartNo Description
ZEBSKI OPT32 BASIC 0-32%ZEBSKI OPTX10 REPLACEMENT PRISM COVER FOR OPT10 OR OPT32
Diverter - compact oil separator. Miniature (2-1/2"H x 3"W x 7"L) gravity separator for Zebra Sidewinder and belt skimmers. ZEBSKI BGST4 GRAVITY SEPARATORPartNo Description
Mount any skimmer in seconds. Designed to attach to tanks with 1/4" lips, walls, drums, barrels and pails. ZEBSKI BGX1 LOCKJAW SKIMMER CLAMPPartNo Description
Works under high temperatures - 842º F (450º C) and pressures - 100,000 psi (6890 Bars). Prevents seizure of parts. High adhesion. For assembly and break-in lubrication, Excellent for cables. Resists dust and dirt. Water and chemical resistant. Provides a quick drying thin film. Not recommended for friction bearings or light-duty bearings. LPS 02516 CS=12 11OZ FORCE 842 LUBEPartNo Description
Optical Refractometers - Zebra
Diverter - Zebra
LockJaw Skimmer Clamp - Zebra
LUBRICATION PRODUCTSLubricant - LPS Force 842°™ Dry Moly
Phone: 402-455-6151Toll Free: 800-488-9699
567
Pump-Circulation – Zebra
Lubricants
Lubri
catio
n, Pu
mps &
Comp
ound
s
LUBRICATION PRODUCTSLubricants-Greaseless - LPS® 1
Displaces moisture, making it ideal for drying out electrical/electronic components. Dries fast and resists oil, dust and dirt build-up. Provides a dry, thin lubricating film. Fast acting penetration. Loosens rusted or frozen parts. Provides short term light corrosion resistant barrier. Resists film build-up. Nonflammable propellant. ideal for delicate mechanisms. Safe on rubber, paint and most plastics. Used worldwide in aviation. Protects tools from rust. Inverta spray valve. Contains ingredients which dissolve and remove greases and oils from delicate mechanisms. LPS 00116 CS=12 LPS #1 11 oz.PartNo Description Point Size
LPS 01128 CS=4 LPS#1 1 gal.LPS 00105 EACH LPS #1 5 gal.
Lubricants All Purpose LPS TKX
All-Purpose Penetrant, Lubricant and Protectant: Excellent all purpose lubricant. Displaces moisture. Loosens rusted or frozen parts., Protects against corrosion. High flash point of 175°F (79°C). Does not contain chlorinated solvents or silicones. Nonconductive. Safe on fabric, plastic, paint and other finishes. Inverta spray valve. LPS 02016 CS=12 110Z TKX ALL PURPOSEPartNo Description
LPS 02028 CS=4 1-GAL TKX ALL PURPOSE
Lubricant Multi-Purpose - WD-40
Frees sticky mechanisms and penetrates to free up frozen or rusted metal parts and fasteners. Keeps controls and linkages working freely. Gets under water, drives it off and keeps it off. Being a non-conductor, W-D 40 can be used to dry out electrical and electronic equipment. Finds and lubricates squeaks in had-to-get-at mechanisms. Silicone free, which means no messy, gummy residue. Lubricates and protects against moisture and corrosive elements. Removes grease, grime, tar, adhesives, gum. WD40 10008 CS=12 8 OZ CAN MP LUBRICANT-SPRAY CANPartNo Description
WD40 10011 CS=12 11.6 OZ CAN MP LUBRI-SPRAY CAN
WD40 10117 CS=1 5 GAL CAN MP LUBRICANT-BULKPartNo Description
WD40 10118 55 GAL DRUM WD40 MP LUBRICANT-BULKWD40 10010 CS=4 1 GAL CAN MP LUBRICANT-BULKWD40 10000 CS=4 SPRAY APPLICATOR FOR BULK PRODUCTS
Frees sticky mechanisms and penetrates to free up frozen or rusted metal parts and fasteners. Keeps controls and linkages working freely. Lubricates, cleans and prevents rust. Precise, easy-to-use drip spout enables precise lubrication, with no overspray or splatter. WD40 10035 3-IN-1,MULTI-P OIL,3OZ DRIP CANPartNo Description
Strong, multi-purpose lubricant and penetrant with added corrosion protection. Provides a nondrying, light, oily film for use on indoor/outdoor equipment. Displaces moisture. Reduces wear caused by friction and corrosion. Loosens rusted or frozen parts. Provides up to one year protection. Nonflammable propellant. Nonconductive. Safe on rubber, paint and most plastics. Used worldwide in aviation. Inverta spray valve. LPS 00216 CS=12 LPS #2 11 OZ GPPartNo Description
LPS 02128 CS=4 LPS #2 1 GALLPS 00205 EACH LPS #2 5 GAL
NSF H1 registered #129000 for use in meat and poultry plants. Penetrates to loosen frozen nuts and bolts. Does not contain silicone. Colorless, odorless. Safe on most surfaces. Inverta spray valve. LPS 01316 OIL,MACHINE,FOOD GRADE,11OZ(312 G),AEROSOLPartNo Description
Effective under extreme temperature and pressure range. Fortified with molybdenum disulfide. Deep penetration to the core of wire rope. High adhesion. Lubricant and corrosion protectant. Use with guards in place to eliminate costly down time. Increases chain and wire rope life. Reduces war caused by friction and corrosion. Wet moly lubricant.
LPS 02416 CS=12 11OZ CHAIN MATE LUBEPartNo Description
Oil Multi-Purpose 3-In-One
OilsLubricants Industrial Strength No. LPS® 2
Food Grade Machine Oil - LPS
PenetrantsChain and Wire Rope Lubricant - LPS ChainMate™
Phone: 402-455-6151Toll Free: 800-488-9699
568
Lubricants
Lubrication, Pumps & Compounds
LUBRICATION PRODUCTSPenetrantsLiquid Wrench® Super Penetrant
A powerful blend of quick-acting, fast penetrating solvents that loosens rusted nuts, bolts, and parts in seconds. RAD L112 12 OZ. SPRAY PENETRANTPartNo Description
RAD L116 1 PT. CAN PENETRANT
Silicone Lubricant - LPS Heavy Duty
Ideal for surfaces like elastomers and plastics where petroleum products are unsuitable. Silicone-rich formula. Water-based formula. Colorless and odorless. Excellent lubricity. Eliminates sticking, binding and squeaking. Dry, nonstaining. Safe on most surfaces. LPS 01516 CS=12 13OZ HD SILICONE LUBEPartNo Description
Silicone Lubricant - LPS Dry Film
Dry film will not attract dust or dirt. Nonflammable. Provides excellent lubrication. Excellent for releasing molded parts. Excellent for high temperature applications up to 500°F (260°C). Colorless, thin film. Does not contain chlorinated solvents.
LPS 01616 12 OZ. (340 GRAMS)PartNo Description
Micro-X is ideal for the removal of grease, dirt and oil from delicate precision electrical, electronic and mechanical parts. Micro-X does not contain CFCs, HCFCs or 1, 1, 1 trichlorethane. Micro-X fast evaporating contact cleaner is flammable. LPS 04516 CS=12 11OZ MICRO-X CONTACTPartNo Description
Cleans electrical/electronic components and delicate mechanisms. Penetrates and removes light greases, oils, dirt and organic soils. Safe on rubber, paint, plastic, metal, fabric and glass surfaces. Leaves no residue, evaporates completely. Non-conductive. LPS 03101 CS=4 1GAL CFC FREE ECCPartNo Description
LPS 03116 CS=12 11OZ CFC FREE ECC
No flash point. Nonflammable - Nonconductive. No rinsing and no residue. Quick penetration. Quick evaporation. Superior wetting action. Safe to use on most surfaces - may be harmful to some plastics. Inverted spray valve. LPS 04016 CS=12 15OZ NOFLASH ECCPartNo Description
Nonflammable precision cleaning. Unique alternative to HCFC cleaners. Nonconductive. Fast evaporating. Quick penetration. No residue. Safe to use on most surfaces. Invertaed spray valve. LPS 04015 CS=12 15 OZ.(425 GRAMS) NO FLASH NUPartNo Description
SPECIALTY FLUIDSCleaners
Phone: 402-455-6151Toll Free: 800-488-9699
569
Visit Us At www.johnday.com
Silicones
LPS Micro-X Contact Cleaner
LPS CFC-Free Electro Contact Cleaner
NoFlash Electro Contact Cleaner
NoFlash NU Precision Contact Cleaner
Lubri
catio
n, Pu
mps &
Comp
ound
s
SPECIALTY FLUIDSCleaners
Nonflammable. Plastic safe. Does not contain HCFCs. Fast evaporating. Quick penetration. No residue. Nonconductive.
LPS 04816 14 OZ. (397 GRAMS)PartNo Description
Formulated for contact cleaning. Nonflammable. Nonconductive. No residue. Displaces moisture. Fast evaporating. Inverta spray valve allows one to spray in an upright or inverted position. LPS 04620 CS=12 18 OZ(511 GRAMS) PSC ELEC CLEANRPartNo Description
Flash point above 140° F (60°C). Controlled Evaporation. No rinsing and no residue. Precision Cleaning. Nonconductive. Safe to use on most surfaces. Low Odor. Inverta Spray Valve. Meets or exceeds these specs: Boeing D6-17487 Rev. H, Learjet LAS 1239. LPS 09128 CS=12 11 GAL ELECTRO 140_ CCPartNo Description
LPS 00905 CS=12 5 GAL ELECTRO 140_ CCLPS 00955 CS=12 55 GAL ELECTRO 140_ CCLPS 00916 CS=12 11OZ ELECTRO 140_ CC
Cleaners/Degreasers - LPS PreSolve®
Especially suited for cleaning parts and equipment & removing grease, adhesives, tars, and oils. High performance citrus based cleaner. Nonflammable propellant. Nonconductive. Natural-based solvent. Does not contain 1,1, 1 trichloroethane. No rinsing and no residue. Controlled evaporation. Fast acting, deep penetration. Safe on all metals and most plastics. Inverted spay valve. LPS 01420 CS=12 LPS 15 OZ PRESOLVEPartNo Description
LPS 01428 CS=4 1GAL PRESOLVELPS 01405 5 GALLLPS 01455 55 GAL
Water-based biodegradable formula. Removes tough, stubborn stains and soils such as grease, oil, sludge, soot, ink, coffee and more. Does not contain chlorinated or petroleum solvents, bleach, ammonia, abrasives or butyl. Contains a corrosion inhibitor to help prevent flash rusting. Super industrial-strength. Nonflammable. Safe on all surfaces. Rinses clean. Foaming action clings to surfaces. LPS 02701 CS=4 1GAL PREC CLEAN-CONCENTRATEPartNo Description
LPS 02705 5 GAL-CONCENTRATELPS 02755 55 GAL-CONCENTRATELPS 02728 28 OZ TRIGGER - READY-TO-USELPS 02765 55 GAL - READY-TO-USELPS 02720 18 OZ AEROSOL - READY-TO-USE
Water-based. Butyl-free. Biodegradable. Noncorrosive. Removes grease and oil. Rinses clean. Ideal for parts washers and pressure washers. Safe on most surfaces except magnesium.
LPS 05528 CLEANER,ALL PURPOSE,BFX 28FL OZ(828ML) TRIGGERPartNo Description
High performance industrial degreaser which cleans on contact. Fast acting on grease, oil and sludge. Natural based. Does not contain chlorinated solvents. Flash point above 100°F (38°C). Safe on all metals and most plastics. Inverted spray valve.
LPS 05020 DEGREASER, CITRUS, 15 OZ.(425 g),AEROSOLPartNo Description
Cleaners/Degreasers - LPS Precision CleanMulti-Purpose
Cleaners - BFX All-Purpose
Degreaser - LPS Citrus
Phone: 402-455-6151Toll Free: 800-488-9699
570
LPS NoSpark Electrical Cleaner
LPS PSC Plastic Safe Cleaner
Electro 140° Contact Cleaner
Lubrication, Pumps & Compounds
SPECIALTY FLUIDSCleaners
Heavy-duty performance. Compliant to California V.O.C. regulations. Improves brake performance. Helps stop disc brake squeal. Fast evaporation. Nonconductive. High solvency. Powerful jet spray. Does not contain 1, 1, 1 trichloroethane. No rinsing and no residue. LPS 03620 CS=12 15OZ TRI FREE BRAKE CPartNo Description
Cleaners/Degreasers - ZeroTri Super
Heavy-duty performance. Compliant to California V.O.C. regulations. Improves brake performance. Helps stop disc brake squeal. Fast evaporation. Nonconductive. High solvency. Powerful jet spray. Does not contain 1, 1, 1 trichloroethane. No rinsing and no residue. LPS 03520 CS=12 15OZ ZEROTRI CLNR/DEGPartNo Description
LPS 03528 CS=4 1 GAL ZEROTRI CLNR/DEGLPS 03505 EACH 5 GAL ZEROTRI CLNT/DEGLPS 03555 EACH 55 GAL ZEROTRI CLNR/DEG
Excellent degreaser for removing greases and oils. Nonflammable. Fast evaporating. Does not contain chlorinated solvents. Nonconductive. No residue. Safe on all metals. Invered spray valve.
LPS 00719 19 OZ. (539 GRAMS)PartNo
Heavy-duty action removes oil, grease, wax, dirt, moisture, tar, brake fluid and other contaminants. Nonflammable. Fast evaporating. Low odor. Quick penetration. No residue. Nonconductive.
LPS 01020 CS=12 19 OZ.(539 GRAMS) HDX DEGREASERPartNo Description
Penetrating action removes oil, grease, tar, resins, corrosion inhibiting compounds and other contaminants. Contains no chlorinated solvents. Very low odor. Can be used in parts washers, dip tanks, and ultrasonic cleaners. Safe to use on most surfaces. LPS 03020 DEGREASER, HDXII HD, 15 OZ.(425 g),AEROSOLPartNo Description
Protects up to two years. Stops rust and corrosion. Provides non-sling lubrication. Nonflammable propellant. Self-healing, waxy film. Provides anti-seize coating. Safe to use on rubber, fabric, plastics and paints. Resists moisture. Commonly used for protection of parts in storage.
LPS 00355 EACH 55 GAL. LPS #3 HD RUSTPartNo Description
LPS 00316 CS=12 LPS#3 11OZ HD RUSTLPS 03128 CS=4 LPS#3 1GAL HD RUSTLPS 00305 LPS#3 5GAL HD RUST INHIBITORLPS 00322 CS=12 LPS#3 20 OZ TRIGGER SPRAY
Nontoxic, nonhazardous and biodegradable. Does not irritate the skin, eyes or respiratory tract. Does not contain 1,1,1 trichloroethane, sulfur, chlorine, chlorinated solvents, water, mineral oil or inactive fillers. High performance lubricating ability eliminates galling and seizing. Safe on all metals. Great for steal and aluminum.
LPS 44220 CS=12 16OZ TAPMATIC NATURALPartNo Description
LPS 44230 CS=4 1GAL TAPMATIC NATURALLPS 44240 EACH 5 GAL TAPMATIC NATURALLPS 44260 EACH 55 GAL TAPMATIC NATURAL
Corrosion InhibitorsRust Inhibitor - LPS® 3 Heavy-Duty
Cutting FluidsCutting Fluids - LPS Tapmatic Natural
Phone: 402-455-6151Toll Free: 800-488-9699
571
Description
TriFree Brake Cleaner
Instant Super Degreaser II
HDX Heavy-Duty Degreaser
HDX II Heavy-Duty Degreaser
Lubri
catio
n, Pu
mps &
Comp
ound
s
SPECIALTY FLUIDSCutting FluidsCutting Fluids - LPS Tapmatic AquaCut
Water-based cutting fluid that extends tool life and reduces friction, heat, and tool failure. Provides clean cuts and fine finishes. Designed for use on steel, aluminum, and other metals, except magnesium. Does not contain any sulfur, chlorine, methylene chloride, or 1,1,1 trichloroethane; nonflammable. Corrosion inhibitors prevent flash rusting.
LPS 01216 CS=12 LPS 16OZ TAPMATIC AQUACUTPartNo Description
LPS 01228 CS=4 1 GAL TAPMATIC AQUACUTLPS 01205 EACH 5 GAL TAPMATIC AQUACUTLPS 01255 EACH 55 GAL TAPMATIC AQUACUT
Cutting Fluids - LPS Tapmatic Edge Lube
White, solid waxy bar. Biodegradable. Excellent for belt, wheel or disc grinding, and sawing applications. Eliminates heat build-up and belt loading. Does not contain any hazardous chemicals. Extends grinding wheel life. Low toxicity. Safe on all metals.
LPS 43200 13 OZ. (364 GRAMS)PartNo Description
Cutting Fluids - LPS Tapmatic #1 Gold
Great for hard to machine metals. Excellent for low speed, high pressure applications. Minimizes torque increases. Does not contain 1,1,1 trichloroethane, chlorinated parafins, water, solvents or inactive fillers. Aerosol provides a pinpoint stream with foaming action. Safe on all metals.
LPS 40320 CS=12 16OZ TAPMATIC #1 GOLDPartNo Description
LPS 40312 11 OZ AEROSOL TAPMATIC #1 GOLDLPS 40330 CS=4 1 GAL TAPMATIC #1 GOLDLPS 40340 EACH 5 GAL TAPMATIC #1 GOLDLPS 40360 EACH 55 GAL TAPMATIC #1 GOLD
Available in liquid or paste. Suitable for most metals. Not recommended for aluminum. Extends tool life. Improves surface finish. Allows increased removal rates. Reduces friction. Flows directly to cutting edge. Suitable for high and low speed applications. LPS 05316 CS=12 TAPMATIC TRICUT 16 FL OZPartNo Description
LPS 05328 CS=6 TAPMATIC TRICUT 1 GAL LIQUID
Greatly extended tool life. Super-fine machined finish in operation after operation. Anti-mist protection for a healthier work environment. No special labeling or reporting. Excels in tough materials. Contains no 1,1,1-trichloroethane or other ozone-depletions. RELTON 04ZNRT "NEW" RAPID TAP 4OZ. CANPartNo Description
RELTON PNTNRT "NEW" RAPID TAP 1PINT CANRELTON 01GNRT "NEW" RAPID TAP 1GAL.
95% Zinc-rich galvanized coating. Commonly used as a flash rust preventative on welded areas. Works like a hot-dip on ferrous metals indoors and out. Long term protection. Withstands water temperature up to 212º F (100º C) and continuous dry heat up to 750ºF (400ºC). Flexible coating will not yellow, chalk, crack or peel. Electrochemically protects bare metal.
LPS 00516 CS=12 14OZ COLD GALVANIZEPartNo Description
COOLANTS, METALWORKINGCHEMICALSCutting FluidsCutting Fluids - LPS Tapmatic® TriCut
Cutting Fluids - New Rapid Tap® Cutting Fluid
SPECIALTY FLUIDSGalvanizing CompoundsCorrosion Inhibitor - LPS Cold Galvanize
Phone: 402-455-6151Toll Free: 800-488-9699
572
Lubrication, Pumps & Compounds
SPECIALTY FLUIDSPenetrant - LPS LST
Specially formulated with low surface tension for fast penetrating action. Attacks rust and corrosion to free frozen parts. Powerful foaming action provides complete surface coverage. Displaces moisture. Lubricates and protects metal surfaces. Flash Point of 175ºF (79ºC). No chlorinated solvents. LPS 01916 CS=12 11OZ LST PENETRANTPartNo Description
LPS 01928 1 GAL LST PENETRANTLPS 01905 5 GAL LST PENETRANTLPS 01955 55 GAL LST PENETRANT
Grease - LPS Red & Redi Multi-Purpose Red
Delivers excellent lubrication. Prevents rust, corrosion and oxidation. Red color allows easy visual inspection. Remains effective at extremely high temperatures 550°F (288°C). Penetrates quickly. Reduces friction and vibration. Resists shock. LPS 05816 CS=12 11 OZ (312 GRAMS) RED & REDIPartNo Description
Grease - LPS White Lithium Multi-PurposeWhite
Rapidly forms into a pure white grease that will not melt or wash away. PTFE additives for superior lubrication. NLGI grade: number 2. Provides maximum lubrication. Rust and oxidation inhibitors protect metal. Pure white color allows easy visual inspection. LPS 03816 10 OZ. (284 GRAMS)PartNo Description
Long life. Excellent load carrying properties. Extends re-lubrication periods. Prolongs bearing life. Good corrosion resistance. Ideal for lubricating all types of bearings. Reduces grease consumption. Also available in 5, 16, and 55 gallon containers. LPS 70614 MULTI-PURP BEARING GREASE 14 OZPartNo Description
Excellent high temperature performance. Resists carbonization at high temps. Very high dropping point. Extends relubrication intervals. Reduces grease consumption. Reduces risk of bearing failure at high temps. Very good vibration resistance. Reduces need for multiple greases. Ensures optimal production rates. Smooth, brown past, mild odor. Max temperature 392ºF (200ºC). Also available in 5, 16 and 55 gallon containers. LPS 70214 HI-TEMP BEARING GREASE 14 OZPartNo Description
Aqua is formulated to withstand the effects of running water and to provide long lasting lubrication even when fully submerged in fresh or salt water. Excellent resistance to fresh and salt water. Resists water washout. Good adhesion properties. •Excellent corrosion resistance. Significant load carrying capability. Reduces wear. Reduces grease consumption. Greater degree of bearing protection. Also available in 5, 16 and 55 gallon containers. LPS 70514 AQUA BEARING GREASE 14 OZ TUBEPartNo Description
USDA H1 Category approved. Uses only FDA listed ingredients. Ensures safety in areas where incidental food contact may occur. High degree of water resistance. Excellent corrosion protection. Very good load capacity. Increases lubrication intervals. Does not contain mineral oil, solvents or silicone. Nontoxic, constraining and nonemulsifying. White colored paste, mild odor. Also available in 5, 16 and 55 gallon containers. LPS 70114 FOOD LUBE BEARING GREASE 14 OZPartNo Description
Grease - LPS ThermaPlex Multi-PurposeBearing
Grease - LPS ThermaPlex Hi-Temp Bearing
Grease - ThermaPlex Aqua Bearing
Grease - LPS ThermaPlex FoodLube Bearing
Phone: 402-455-6151Toll Free: 800-488-9699
573
Call John Day Company at 800-488-9699 for your
Tool Crib Management and Vending Solutions
Lubri
catio
n, Pu
mps &
Comp
ound
s
SPECIALTY FLUIDSGrease - ThermPlex Hi-Load Bearing
Contains 3% moly. Excellent Load carrying ability. Withstands shock loading. Reduces wear from vibration. Good corrosion resistance. Excellent anti-wear properties. Wide operating temperature range. Reduces maintenance costs. Blue/black colored paste, petroleum odor. Temperature range -22°F (-30°C) to 302°F (150°C). Also available in 5, 16 and 55 gallon containers. LPS 70414 HI-LOAD BEARING GREASE 14 OZPartNo Description
Welding SuppliesGrease - LPS Anti-Spatter
Safe, water-based formula. Excellent spatter protection. Nontoxic. Nonflammable. Does not contain suspect carcinogens, such as methylene chloride. Does not contain silicone. Paint compatible. Oversized nozzle for easy use with welding gloves. LPS 02116 CS=12 LPS 13OZ ANTI-SPATTERPartNo Description
MISCELLANEOUS
Moisture free. No residue, Nonflammable. Nonabrasive. Odorless. LPS 05710 CS=12 10 OZ QB PRECISIONPartNo Description
Fast acting. Disposable. Portable. Premoistened. Residue free. Non-scratching abrasive. Pleasant fragrance - Citrus scent. LPS 09200 BUCKET OF 72 TOWELSPartNo Description
Tolerances on Thicknesses: 0.015" ±0.0035", 0.031" ±0.005", 0.062" ±0.005", 0.125" ±0.016. Vegetable fiber with cork granules and glue-glycerin binder. Pressure max psig (bar) 200 (15). Temperature max 212°F (100°C). P x T max. psig x 40,000°F (1300°C). GAR 31029-0087 1/64" #660PartNo Description
GAR 31029-0095 1/32" #660GAR 31029-0102 1/16" #660GAR 31029-0118 1/8" #660
Excellent sealability; unique blend of aramid fibers, fillers and elastomeric binders provides improved torque retention and drastically lowered emissions levels. Versatile; variety of elastomers excel in a wide range of services. Cost savings; cuts operational costs through reduced waste, maintenance, stocked inventory, fluid loss and energy consumption. Good for sealing water, saturated steam and inert gases. Temp range -40F to 700F (400F continuous max). SBR Binder. Pressure psig (bar) 1200 (83). Tensile strength across grain 2800 psi. Compressibility range 7-17%.
GAR 39004-2438 1/64" #3400 60"X60" BLUE-GARDPartNo Description
GAR 39004-2480 1/32" #3400 60"X60" BLUE-GARDGAR 39004-2521 1/16" #3400 60"X60" BLUE-GARDGAR 39004-2563 3/32" #3400 60"X60" BLUE-GARDGAR 39004-2005 1/8" #3400 60"X60" BLUE-GARD
Prevents glare, dries to the touch in just two to four minutes, leaves a uniform color and gives scribed lines a clear, precise appearance. Scribe lines on metal before drilling or welding. Available in many colors. Resistant to cutting fluids, moisture, grease gasoline, and petroleum solvents. Scribe lines in metal before drilling or welding.
DYKEM 80000 CS=12 STEEL BLUE 16OZ AEROSOL CANPartNo Description
DYKEM 80200 2OZ STEEL BLUEFELT APPLICATOR TIPDYKEM 80300 4OZ STEEL BLUE BRUSH-IN-CAPDYKEM 80400 CS=12 STEEL BLUE 8OZ BRUSH-IN-CANDYKEM 80600 930ML STEEL BLUE BOTTLEDYKEM 80096 16OZ STEEL RED AEROSOLDYKEM 80296 2OZ STEEL RED FELT APPLICATOR TIPDYKEM 80396 4OZ STEEL RED BRUSH-IN-CAPDYKEM 80496 CS=12 STEEL RED 8OZ BRUSH-IN-CAPDYKEM 80696 930ML STEEL RED BOTTLEDYKEM 81027 CS=12 WHITE/OPAQUE STAIN 12OZ AEROSOLDYKEM 81427 8OZ WHITE/OPAQUE BRUSH-IN-CAPDYKEM 81727 1 GAL WHITE/OPAQUE BOTTLEDYKEM 81030 12OZ YELLOW AEROSOLDYKEM 81405 8OZ YELLOW RUSH-IN-CAPDYKEM 81705 1 GAL YELLOW BOTTLE
Phone: 402-455-6151Toll Free: 800-488-9699
574
Call Industrial Sales at 800-488-9699
MISCELLANEOUS CLEANERS QB Precision Duster
Quick blast precision duster removes contaiminants, dirt, dust and other soils.
LPS WorkPlace Hand Cleaner Towels
Gasketing Products
Garlock Vegetable Fiber Gasketing
Blue-Gard® Gasketing
Layout Fluids Layout Fluids – Dykem® Transplant
Lubrication, Pumps & Compounds
SPECIALTY FLUIDSRemover and Thinner - Dykem® Ideal for surface preparation, as well as removing layout fluids and staining colors. May also be used to dilute staining colors. Thoroughly cleans and prepares metal surfaces. Removes dirt, grease and oil from metals, most plastics and glass.
DYKEM 82038 16 OZ. AEROSOLPartNo Description
DYKEM 82638 930ML BOTTLEDYKEM 82738 1 GALLON BOTTLEDYKEM 82838 5 GALLON PAIL
Hi-Spot Blue - Dykem® Hi-Spot Blue is a paste that spreads easily and evenly to show high spots on bearings. Non-drying and non-hardening. Transfers from one surface to another.
DYKEM 83307 CS=36 HI-SPOT BLUE .55 OZ TUBEPartNo Description
DYKEM 83507 HI-SPOT BLUE 14 OZ CAN
MarkersMarkers - Ball Paint Marker™
Marks with real paint, dries in 5 minutes. Marks on metal, wood, plastic, glass, any hard surfaces. Lead-free, non-toxic. Marks are weather- and fade-resistant. Unbreakable plastic bottle with 1/8" steel ball tip. Stores in pocket for easy access. Plastic cap keeps tip clean between jobs. Marking range -50°F top 150°F (-46°C to 66°C). Other colors also available. MARKAL 84620 WHITE 2 OZ BALL PAINT MARKRPartNo Description
MARKAL 84621 YELLOW 2 OZ BALL PAINT MRKRMARKAL 84622 RED 2 OZ BALL PAINT MARKER
Markers - #200 Lumber Crayons
Also known as layout chalk or keel. Standard 1/2" hex shape fits Peterson No. 106, No. 108, and No. 109 holders. Lead free. Weather and fade-resistant; marks on cardboard, ceramics, concrete, lumber, metal, paper, plastics, and rubber. Packaged 12 of one color per box. Marking range -50°F to 150°F. MARKAL 80350 WHITE 200 LUMBER CRAYONPartNo Description
MARKAL 80351 YELLOW 200 LUMBER CRAYONMARKAL 80352 RED 200 LUMBER CRAYON
Markers - Paintstik®
Real paint in stick form. Weather-resistant, UV-resistant. Ideal for layout, color coding, fabrication and identification. Marks through oil and water. Marks on smooth, rough, rusty, or dirty surfaces. For use on metal, wood, plastic, concrete, rubber, glass, cardboard, and paper. Lead-free, non-toxic. Size 11/16" x 3/4". Available in other sizes and colors including fluorescents. Please inquire. MARKAL 80220 WHITE ’B’ PAINTSTIKPartNo Description
MARKAL 80221 YELLOW ’B’ PAINTSTIKMARKAL 80223 BLACK `B’ PAINTSTIK
Marks with real paint, dries in 3 minutes. Nib releases paint as needed for continuous marking. Marks on all surfaces including metal, wood, glass, plastic, rubber, cardboard, and paper. Lead-free, low halogens. Weather resistant. The fiber nib is replaceable to assure complete use of each marker. Durable metal barrel. Temperature range -50°F to 150°F. Also available in colors other than show. Please inquire. MARKAL 96820 WHITE VALV ACTN PAINT MRKRPartNo Description
MARKAL 96821 YELLOW VALV ACTN PAINT MRKRMARKAL 96822 RED VALV ACTN PAINT MARKERMARKAL 96823 BLACK VALV ACTN PAINT MRKRMARKAL 96825 BLUE VALV ACTN PAINT MARKERMARKAL 96826 GREEN VALV ACTN PAINT MARKERMARKAL 96867 TIP FOR VALVE ACTION MARKERS
By Sanford-A division of Irwin Industrial Tools. The 1/2" wool nib produces broad, bold strokes. Proven permanent on most surfaces. Highly water resistant and quick drying. 12 each per box. Black ink. SANFORD 44001 MAGNUM 44 BLACK MARKERPartNo Description
Ideal for temporary marks on most surfaces. Tapered shape makes chalk easy to hold. Large 1" x 4"; 144 per case. Also available in other colors - Please enquire.
MARKAL 80500 BX=144 WHITE RAILROAD CHALKPartNo Description
Markers - Valve Action® Paint Marker
Sharpie® Magnum® Marker
Chalk
Phone: 402-455-6151Toll Free: 800-488-9699
575
Your Midwest Distributor for over 96 Years
MARKING PRODUCTS
Markal Railroad Chalk
Lubri
catio
n, Pu
mps &
Comp
ound
s
Temperature Indicator Sticks - MarkalThermomelt®
Accurate, fast, low-cost method for measuring surface temperatures. Ideal for annealing, forging, welding - anywhere where temperature measurement is important. Accurate to within (+ -) 1% of rated temperature. When using, the initial mark appears dull and chalky; when desired temperature is reached, the mark quickly melts to a glossy, transparent-appearing liquid. Accurate to within ± 1% of rated temperature. 33% bigger and stronger; same proven reliability. Bigger design makes Thermomelt the industry's longest-lasting heat stick. Bigger, break-resistant sick cuts down on replacement costs. Improved holder features a durable metal shaft and convenient pocket clip. Gravity advance holder protects stick and prevents it from slipping back inside. 5" long. Meets ANSVASME Code B32.1 & B313, AWSD1.1 and ASME Code Sec. I, III and VII, NIST traceable.
MARKAL 86544 THERMOMELT STIK - 225°FPartNo Description
MARKAL 86733 THERMOMELT STIK - 400°FMARKAL 86769 THERMOMELT STIK - 450°FMARKAL 86868 THERMOMELT STIK - 700°FMARKAL 86931
Non-toxic, lead-free thread compound in handy stick form. Use on metalthreads - seals up to 350°F; pressures to 2000 psi. For water, steam, air, and natural gas service - not for oxygen, chlorine, or other oxidizers.
MARKAL 11175 1-1/4 OZ PIPETITE STIK PIPE CMPDPartNo Description
Phone: 402-455-6151Toll Free: 800-488-9699
576
Log-on to www.johnday.com For Pricing and Product Information
Notes
THERMOMELT STIK - 700°F
MARKING PRODUCTS
Pipe Stick – Markal Pipetite-Stik®