LH Toll Free - John Day Company catalog/abrasive… · Lifetime nylon-end bearings provide free-wheeling roller operation without leaving marks on the painted surface. Plastic handle

Abras

ives &

Brus

hes

BrushesPaintingBrush, Pure White China Bristle

Plain wood beaver tail handle.

OSBORN 70151 1" BRISTLE PAINT BRUSH 7/16 2-1/4PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 70153 2" BRISTLE PAINT BRUSH 9/16 2-3/4OSBORN 70155 3" BRISTLE PAINT BRUSH 11/16 3OSBORN 70156 4" VARNISH BRUSH, WOOD HDL 7/8 3-1/4

Brush, Pure White China Bristle Flat SashTool

Black plastic sash handle.

OSBORN 70087 2" SASH PAINT BRUSH 9/16 2-3/4PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 70085 1" SASH PAINT BRUSH 7/16 2-1/4

Brush, Pure Black China Bristle Oval SashTool

Natural plastic handle.

OSBORN 70093 #6 OVAL SASH BRUSH 7/8 2-1/8PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 70094 #8 OVAL SASH PAINT BRUSH 1 2-3/8

Brush, Pure White Bristle Round Marking

Long plain white wood handle, paper wrap.

OSBORN 74032 3/16 7/8PartNo Brush Dia. Trim Length

OSBORN 74033 7-32 1

Black plastic bow or kaiser handle.

OSBORN 71107 1-1/2"VARNISH BRUSH,3/8"WIDE 3/8 2PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 71108 2"VARNISH BRUSH,7/16"WIDE 7/16 2OSBORN 71110 3"VARNISH BRUSH,1/2"WIDE 1/2 2-1/4OSBORN 71102 2"VARNISH BRUSH,7/16"WIDE 7/16 2-1/4OSBORN 71103 2-1/2"VARNISH BRUSH,1/2"WIDE 1/2 2-1/2

Black plastic kaiser handle.

OSBORN 86133 1" VARNISH BRUSH 3/8 2PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 86136 3" ECONOMY PAINT BRUSH 1/2 2-1/4OSBORN 86137 4" BRISTLE PAINT BRUSH 11/16 2-1/2

With plain wood handles.

OSBORN 86015 1/2" ECONOMY PAINT BRUSH 1/4 1-1/2PartNo Description Paintbrush

ThicknessTrim

Length

OSBORN 86016 1" ECONOMY PAINT BRUSH 5/16 1-1/2OSBORN 86017 1-1/2" ECONOMY PAINT BRUSH 5/16 1-1/2OSBORN 86018 2" TARTAN PAINT BRUSH 5/16 1-1/2OSBORN 86019 3" WHITE PAINT BRUSH 3/8 1-1/2OSBORN 86020 4" TARTAN WHITE PAINT BRUSH 11/16 2-1/4

Plain wood handle, paper wrap.

OSBORN 70108 #6 STENCIL BRUSH, 1-1/4"DIA 1-1/4 1-1/2PartNo Description Brush Dia. Trim

Length

OSBORN 70109 2" STENCIL BRUSH 1-1/2 1-5/8

Brush, Pure Grey Bristle

Brush, Economy China Bristle

Brush, Economy Pure White Bristle

Brush, Pure China Bristle Stencil Marking

Phone: 402-455-6151Toll Free: 800-488-9699

38

Abrasives & Brushes

BrushesPaintingPaint AccessoriesCover, Synthetic

With phenolic core; widely used for striping driveways and aisle ways. Can be used on most every surface.

OSBORN 85070 4" PAINT ROLLER COVER 3/4 MediumPartNo Description Roller

NapRoller Texture

Cover, Synthetic Disposable Roller

For all spreading applications. Ideal for painters who use multiple colors. Just open the can, fill the tray, dip in and start working. No time wasted -- no cleaning. A quick, clean way to paint.

OSBORN 85063 9" PAINT ROLLER COVER 7/16PartNo Description Roller Nap

Cover, Danello Master Roller

With phenolic core; for smooth and medium surfaces. Danello fabric produces a smoother finish when rolled in either direction. Will not mat.

OSBORN 85013 9"MASTER PAINT ROLLER COVER 3/8 MediumPartNo Description Roller

NapRoller Texture

Cover, Polyester/Wool Master Roller

With phenolic core; for brick, concrete, stucco, masonry, chain link and wire fences.

OSBORN 85064 9"MASTER PAINT ROLLER COVER 1-1/4 Very RoughPartNo Description Roller

NapRoller Texture

Osborn's compression, cage-type roller frame has 5 spring-steel ribs with "bow spring" compression for positive holding of cover. Sturdy, lightweight 5/16" steel rod frame. Lifetime nylon-end bearings leave no mark on painted surfaces. Plastic handle has threaded end for use with extension pole. OSBORN 85003 7"INDUSTRIAL ROLLER FRAMEPartNo Description

OSBORN 85004 9"INDUSTRIAL ROLLER FRAME

This quality-constructed, lightweight frame is made with 1/4" steel rods. The compression, cage-type roller frame has 3 spring-steel ribs with "bow spring" compression to hold the cover securely. Lifetime nylon-end bearings provide free-wheeling roller operation without leaving marks on the painted surface. Plastic handle is threaded so that extension poles can be attached. OSBORN 85073 9" ROLLER FRAMEPartNo Description

Made with 5/16" steel rod. Four spring-steel ribs with "bow spring" compression hold the cover securely. An easy-to-hold, coarse grain, plastic handle is threaded so that an extension pole can be attached. OSBORN 85071 4" PAINT ROLLER FRAMEPartNo Description

Heavy, rust-proofed steel, ladder-grip legs. For 7" or 9" rollers.

OSBORN 85033 3 QT. DEEP WELL PAINT TRAYPartNo Description

Frame, Industrial

Frame, Economy

Frame, Heavy-Duty Industrial

Tray, 3-Quart Deep Well

Phone: 402-455-6151Toll Free: 800-488-9699

39

Visit Us At www.johnday.com

Abras

ives &

Brus

hes

BrushesMaintenanceBrooms

Osborn Upright Brooms are excellent for a wide variety of applications: wet sweeping, heavy industrial use and all-purpose easy sweeping. 17" trim length, 56" overall length.

OSBORN 75146 515 17" CORN BROOM Corn/Grass Blend 11 WirePartNo Description Fill Material Approx.

FlareBinding

OSBORN 75147 WAREHOUSE BROOM Corn/Rattan Blend 10 Sewed

Broom, Osborn PRO Economy Street

A durable, economical street broom. Red palmyra fill.

OSBORN 81260 16"-7/16" ECON PUSH BROOM 3-1/2 6-1/4PartNo Description Block

WidthTrim

Length

Broom, Osborn PRO Garage

Designed for rough, wet or dry sweeping in factories, garages, warehouses and service stations. Palmyra fill. 3-7/8" trim length. OSBORN 81251 18" ECON COARSE FLOOR BROOMPartNo Description

OSBORN 81252 24"GARAGE SWEEP FLOOR BRUSH

Brooms, Osborn PRO Floor - Plastic Block

Plastic block floor brushes are commonly used in food service operations and meet FDA standards.

OSBORN 81280 24" ECON COARSE SWEEP BROOM Blue Polypro 3PartNo Description Fill Material Trim

Length

OSBORN 81274 18" ECON COARSE SWEEP BROOM Safety Orange Polypro 3-1/4

For smooth surfaces as well as rougher surfaces such as sidewalks and driveways. 2-3/4" trim length. OSBORN 81216 18" SYNTHETIC PUSH BROOM Blue PolyproPartNo Description Fill Material

OSBORN 81222 24" MED SWEEP FLOOR BRUSH Black PolyproOSBORN 81211 18"ECONOMY FINE SWEEP BROOM Black Tampico

Natural finished wood with threaded end fits all Osborn PRO floor brushes.

OSBORN 81002 5’ ECONOMY WOOD THRDED HDL 15/16PartNo Description Diameter

OSBORN 77018 5’ METAL HANDLE THREADED 7/8PartNo Description Diameter

Natural finish wood with tapered ends for use with all street brooms and squeegees. With Osborn Flexsweep heavy duty polymer brace. OSBORN 77005 4-1/2’TAPERD WOOD BROOM HDL 1-1/8PartNo Description Diameter

OSBORN 77017 5’ TAPERED WOOD BROOM HDL 1-1/8OSBORN 77006 5’ HANDLE WOOD W/FLEX SWEEP 1

With threaded wood end or threaded metal attachment.

OSBORN 77015 5’ METAL-TIP THREADED HDLE 15/16PartNo Description Diameter

OSBORN 77014 5’ HVY THRDED WOOD HANDLE 1-1/8

Brooms, Osborn PRO Medium Sweeping Floor

Handle, PRO Wood Floor Brush

Handle, Push Broom

Handle, Wood - Threaded

Phone: 402-455-6151Toll Free: 800-488-9699

40

Corn Broom

Broom Handles (Brooms sold separately)

Handle, Steel – Metal Thread

Abrasives & Brushes

BrushesMaintenance

Handle, FiberglassStrong, lightweight broom handle commonly used in food service industries, and other specialized industrial environments. OSBORN 77020 1"X60 FBRGLASS NYL THD TIPPartNo Description

Sturdy, metal-plated (rust resistant) braces provide additional support and fit all handle sizes. OSBORN 75144 WIDE ANGLE BRACE FullPartNo Description Brace

OSBORN 75115 CLAMP STYLE BRACE Handle

SqueegeesSqueegee, Floor

Osborn Floor Squeegees feature a two-piece construction with heavy-gage, zinc-plated steel handles and retaining strips. Blades are 1/4" thick by 2" wide black neoprene rubber. OSBORN 75470 18" STRAIGHT FLOOR SQUEEGEEPartNo Description

OSBORN 75472 24" STRAIGHT SQUEEGEE

For cleaning motors, machinery and metal parts. 11" overall length.

OSBORN 75975 ECONOMY PARTS CLEAN BRUSH 1-1/8 2-3/4PartNo Description Brush Dia. Trim

Length

Excellent shop brushes for heavier material removal, general factory and store dusting. Black tampico fill.

OSBORN 54005 8" COUNTER DUSTER 2 1/2PartNo Description Trim

Length

3/8" brush width. 7-1/4" overall length.

OSBORN 83112 BRASS ECONOMY CLEANING BRSH 0.006 7/16PartNo Description Fill Dia. Trim

Length

OSBORN 83111 SS WIRE HAND SCRATCH BRUSH 0.006 7/16

6" brush length. 1-1/8" trim length.

OSBORN 83007 CURVED HDL ECONOMYSCRATCH

15/16 13-3/4 Stainless Steel

PartNo Description BrushArea

WidthOverallLength

Fill Material

OSBORN 83001 3X19 CARBON SCRATCH BRUSH 15/16 13-3/4 SteelOSBORN 83100 CURVED HDL ECONOMY

SCRATCH1-1/8 13-11/16 Steel

10" overall length. 5-1/4" brush length.

OSBORN 83008 SHOE HANDLE ECONOMYSCRATCH

1-1/16 Stainless Steel 1-1/8


WidthFill Material Trim

Length

OSBORN 83003 4X16 CARBON SCRATCH BRUSH 1-1/16 Steel 1-1/8

Duster, Master® Coarse Counter

Brushes, ScratchBrush, Small Cleaning Scratch with PlasticHandle

Brush, Curved Handle Scratch

Brush, Shoe Handle Scratch

Phone: 402-455-6151Toll Free: 800-488-9699

41

Broom Handles

Miscellaneous Broom Accessories Brace, Floor Brush, Reusable

Cleaning Equipment Parts Cleaning Brush

Counter Dusters

Abras

ives &

Brus

hes

Palmyra fill.

OSBORN 81016 8" ECONOMY PLATERS BRUSH 2-3/4 1-3/16


WidthTrim Length

Brushes, Acid/Flux

Horsehair material, tin ferrule. 6-1/8" overall length.

OSBORN 74060 3/8" ACID BRUSH, HORSEHAIR 7/8PartNo Description Trim

Length

OSBORN 74061 7/16" ACID BRUSH, HORSEHAIR 7/8OSBORN 74062 9/16" ACID BRUSH, HORSEHAIR 7/8

•Cleaning the entire inside circumference of a hole •Cleaning out threaded areas •Brushing edges of keyways and other recesses •3-1/2" overall length •1" brush length

OSBORN 36188 1" SPIRAL WIRE TUBE BRUSH 0.008 Stainless Steel 1/8PartNo Description Fill Dia. Fill Material Stem

Dia.

OSBORN 36073 1" SPIRAL WIRE TUBE BRUSH 0.008 Steel 1/8

Can be used for numerous internal cleaning jobs. They can be used as a hand tool, mounted in a drill press, or on a portable power tool. •Internal cleaning •Removal of small imperfections •Surface prep •5" overall length •Fill material - steel

OSBORN 51023 5/8" WIRE TUBE BRUSH 2 0.008 0.208

PartNo Description Length ofBrushPart

Fill Dia. Stem Dia.

OSBORN 51033 1" WIRE TUBE BRUSH 2-1/2 0.0104 0.238

Good for cleaning engine block, heads and assorted parts during the engine rebuilding process. Fill material - nylon.

OSBORN 51100 1/4" NYLON TUBE BRUSH 2 6-1/4 0.005PartNo Description Length of

Brush PartOverallLength

Fill Dia.

OSBORN 51101 3/8" NYLON TUBE BRUSH 2 6-1/4 0.005OSBORN 51102 1/2" NYLON TUBE BRUSH 3 8-1/2 0.008OSBORN 51103 3/4" NYLON TUBE BRUSH 3 8-3/4 0.012OSBORN 51104 1" NYLON BRISTLE TUBE BRUSH 5 15-1/2 0.01OSBORN 51108 2" NYLON BRISTLE TUBE BRUSH 5 15-1/2 0.01

•Cleaning of Large Metal Surfaces •Removal of Burrs, Weld Scale and Rust •Edge Blending •Surface Prep •Fill Material - Steel •9000 RPM •5/8"-11NC Threaded Arbor

OSBORN 32134 4" CRIMPED WIRE CUP BRUSH 0.02 1-1/8PartNo Description Fill Dia. Trim

Length

Brushes, Tube

Phone: 402-455-6151Toll Free: 800-488-9699

42

Brushes

Maintenance Brushes, Scrub Platers Brush

Wire Brushes Brushes, Tube Spiral Wire Tube Brush

Double Spiral Tube Brush

Brush, Nylon Tube

Brushes, Cup Brush, Crimped Wire Cup

Abrasives & Brushes

Brushes

•Removal of weld scale, rust, old paint and corrosion •Cleaning and surface prep of metals •Fill material - steel •6000 RPM •5/8"-11NC threaded arbor

OSBORN 33150 6"X5/8-11 .025 CUP BRUSH 0.02 1 1-1/4PartNo Description Fill Dia. Rows

WideTrim

Length

OSBORN 33015 6" KNOT CUP BRUSH .025 0.02 1 1-3/4OSBORN 33034 6"X5/8-11.035 KNOT CUPBRUSH 0.035 2 1-3/4OSBORN 33021 CUP BRUSH 6" KNOTTED .035 0.035 1

•Cleans and prepares flat surfaces and edges •Light and medium duty cleaning •Fill material - steel •14,000 RPM •5/8"-11NC threaded arbor

OSBORN 32030 2-3/4" CRIMPED WIRE CUP BRUSH Steel 0.014 1PartNo Description AH Nut

ColorFill Dia.

•Removes scale, deburrs, cleans welds and flat surfaces •Heavy-duty application burr removal •Fill material - steel •14,000 RPM •7/8" trim length

OSBORN 33000 3-1/2" KNOT STYLE CUP BRUSH 5/8-11NC 0.02PartNo Description Threaded AH Fill Dia.

OSBORN 33359 2-3/4"X5/8-11.014 KNOT CUP 5/8-11NC 0.014OSBORN 33459 2-3/4"X5/8-11.020 KNOT CUP 5/8-11NC 0.02OSBORN 33456 2-3/4".020 M10X1.25 KNOT CUP M-10 x 1.25 0.02

With 1/4" shank. Ideal for a variety of general uses, including surface blending, cleaning and polishing; can be used on CNC equipment. Fill material - steel. 1" brush length & trim length. 20,000 RPM.

OSBORN 30061 3/4".020 WIRE END BRUSH 2-3/4 0.02PartNo Description Overall

LengthFill Dia.

OSBORN 30067 1" .02 WIRE END BRUSH 1-7/8 0.02

Rugged brushing tools designed with the finest wire to offer efficient usage for a wide variety of tough cleaning and maintenance applications; can be used on CNC equipment. Fill diameter .014. 22,000 RPM.

OSBORN 30112 1-1/8".014 HD KNOT ENDBRUSH 7/8 2-1/2 Steel 7/8

PartNo Description Lengthof Brush

PartOverallLength

Fill Material TrimLength

OSBORN 30441 1" KNOTTED END BRUSH 1 2-3/4 Stainless Steel 1-1/8

•Deburring •Rust Removal •Surface Finishing •General Cleanup of Tools •Ideal Bench Motor Brush •Fill Material - Steel •2" Arbor Hole (see page 16 for Adapters) •Fill Diameter .014

OSBORN 22012 8"X2" .014 WIRE WHEEL 1-1/2 1-1/2 4500PartNo Description Trim

LengthFace

WidthMaxRPM

OSBORN 22029 10"X2".014 WIRE WHEEL 2-1/8 2 3600

Brushes, EndBrush, Crimped Wire End

Brush, Knot Wire End

Brushes, Power WheelBrush, Crimped Wire Wide Face Wheel

Phone: 402-455-6151Toll Free: 800-488-9699

43

Wire Brushes Brushes, Cup Brush, Knot Wire Cup

Brush, Small Grinder Crimped Wire Cup

Brush, Small Grinder Knot Wire Cup

Abras

ives &

Brus

hes

•Edge Blending •Deburring •Rust Removal •Surface Finishing •Cleaning •General Bench Motor Use •Fill Material - Steel •2" Arbor Hole Except 21587 (5/8")

OSBORN 22065 6"X2" .012 WIRE WHEEL 1 7/8 6000PartNo Description Trim

LengthFace

WidthMaxRPM

OSBORN 22066 6"X2" .014 WIRE WHEEL 1 7/8 6000OSBORN 22076 7".014CS CRIMP WIRE WHEEL 1-1/2 3/4 6000OSBORN 22086 8"X1-1/8"X2"AH .014 WIRE 1-1/2 5/8 4500OSBORN 22111 10".0118 CRIMP WIRE WHEEL 2 1-1/4 3600OSBORN 21587 6".014CS 1/2" WIRE WHEEL 1-1/8 5/8 6000

Brush, Crimped Wire Narrow Face Wheel

•Deburr and Clean Narrow Areas •Produce Antique Finishes •Rust Removal •Paint Removal •Fill Material - Steel •6,000 RPM

OSBORN 21584 6"WF X 5/8".008 CS WR WHL 1-1/8 5/8 13/32

PartNo Description TrimLength

FaceWidth

Width atFace

Plates

Brush, Knot Wire Wheel

•Material Removal •Weld Cleaning •Blending •Deburring •Pipeline Cleaning

OSBORN26042

6".014CS 1/2"ARBORKNOT WHL

5/8 1/2 0.014 Steel 1-1/2 1/2 9/16 9000

PartNo Description ThreadedArborHole

BushingAH

FillDia.

FillMaterial

TrimLength

FaceWidth

Widthat FacePlates

MaxRPM

OSBORN26225

6".016SS 1/2"ARBORKNOT WHL

5/8 1/2 0.016 StainlessSteel

1-1/2 1/2 9/16 9000

OSBORN26047

6".025S 1/2" ARBORKNOT WHL

5/8-11NC - 0.025 Steel 1-1/2 1/2 9/16 9000

PartNo Description ThreadedArborHole

BushingAH

FillDia.

FillMaterial

TrimLength

FaceWidth

Widthat FacePlates

MaxRPM

OSBORN26062

8".025S 5/8" ARBORKNOT WHL

5/8-11NC - 0.025 Steel 1-11/16 5/8 9/16 8500OSBORN26928

3"X3/8"X.020 KNOTWHEEL

- 3/8 0.02 Steel 5/8 3/8 7/16 25000OSBORN26050

7" KNOTTED WIREWHEEL

- 5/8 0.0118 Steel 1-3/4 5/8 9/16 9000OSBORN26230

8" KNOTTED WIREWHEEL

- 5/8 0.016 Steel 1-11/16 5/8 9/16 8500

Popular sizes for gear deburring. For use on automatic and semi-automatic equipment or off-hand work. 2" arbor hole. Fill material - steel.

OSBORN 26865 10" KNOT WIRE BRUSH, HD 0.02 1-3/4 7/8 4500PartNo Description Fill Dia. Trim

LengthFace

WidthMaxRPM

OSBORN 26317 14" KNOT WIRE BRUSH, HD 0.014 1-7/8 5/8 3000

•ID Cleaning •Deburring •Rust, Scale, Carbon, and Corrosion Removal •20,000 RPM

OSBORN 11045 2-1/2" X .006 WIRE BRUSH 1/2 Steel 3/4 1/4PartNo Description Arbor

HoleFill Material Trim

LengthFace

Width

OSBORN 11056 3".0118 CRIMPED WIRE WHEEL 3/8 Steel 15/16 3/8OSBORN 11094 3" .006 WIRE WHEEL 1/2 Stainless Steel 1 1/4

Slip fit. Used in pairs.

OSBORN 75021 1/2" METAL ADAP F/2"AH (PR)PartNo Description

OSBORN 75022 5/8" METAL ADAP F/2"AH (PR)OSBORN 75023 3/4" METAL ADAP F/2"AH (PR)OSBORN 75025 1" METAL ADAP F/2"AH (PR)

Adapters, Power BrushAdapters, 2" Arbor Hole

Phone: 402-455-6151Toll Free: 800-488-9699

44

Brushes Wire Brushes Brushes, Power Wheel Brush, Crimped Wire Medium Face Wheel

Brush, Knot Wire Wheel – Wide Face, Heavy Duty & Extra Heavy Duty

Brush, Small Diameter Crimped Wire Wheel

Abrasives & Brushes

Brush, Crimped & Concave Wire Wheel BrushWith Shank

•Rust, Scale, Paint, Dirt, Weld Spatter Removal •Fill Material - Steel •1/4" Shank Diameter

OSBORN 11256 1-1/2".008 CIRC FLRD CUP 0.008 3/8 20000PartNo Description Fill Dia. Trim

LengthMax RPM

OSBORN 11264 2-1/2".014 CIRC FLRD CUP 0.014 11/16 20000OSBORN 11247 4".014 CIRC FLRD CUP 0.014 1 25000

Brush, Untreated Tampico Wheel

•Scrubbing •Polishing •Dusting •6,000 RPM

OSBORN 20014 6"X2" AH TAMPICO FILL WHEEL 1-5/8PartNo Description Trim

Length

Abrasives

Osborn zirconium flap discs bridge the gap between angle grinding wheels and resin fibre discs. They combine aggressive cutting power with better surface finishing ability and up to 30 times the life of resin fibre discs. Fill material - Zirconium.

OSBORN 80500 FLAP DISC, 7"X5/8-11 ZIRC ZA 36 8600PartNo Description Abrasive

TypeMax RPM

OSBORN 65993 FLAP DISC, 7"X5/8-11 ZIRC ZA 60 8600OSBORN 65976 FLAP DISC, 4-1/2"X0.875 ZIRC ZA 36 13300OSBORN 65977 FLAP DISC, 4-1/2"X0.875 ZIRC ZA 60 13300

COLOR: Brown RPM RATINGS The maximum allowable RPM for Quick Change SocAtt, Lockit & ClickOn discs is the same as the maximum RPM of the holder pad used to drive the discs, provided the holder pad and the disc are the same nominal diameter. APPLICATIONS: BEST DISC FOR: General purpose grinding, deburring, and blending on ferrous metals. Our most popular type disc. Ideal for flat or contour surfaces. Most commonly used are grits 36-50 for weld removal. Grits 60-120 for removal of imperfections and blending. STAABR 522101 3/4" 24G A/O SOCATTPartNo Description

STAABR 522102 3/4" 36G A/O SOCATTSTAABR 522103 3/4" 40G A/O SOCATTSTAABR 522104 3/4" 50G A/O SOCATTSTAABR 522105 3/4" 60G A/O SOCATTSTAABR 522106 3/4" 80G A/O SOCATTSTAABR 522107 3/4" 100G A/O SOCATTSTAABR 522108 3/4" 120G A/O SOCATTSTAABR 522109 3/4" 150G A/O SOCATTSTAABR 522110 3/4" 2180G A/O SOCATTSTAABR 522111 3/4" 240G A/O SOCATTSTAABR 522112 3/4" 320G A/O SOCATTSTAABR 522201 1" 24G A/O SOCATTSTAABR 522202 1" 36G A/O SOCATTSTAABR 522203 1" 40G A/O SOCATTSTAABR 522204 1" 50G A/O SOCATTSTAABR 522205 1" 60G A/O SOCATTSTAABR 522206 1" 80G A/O SOCATTSTAABR 522207 1" 100G A/O SOCATTSTAABR 522208 1" 120G A/O SOCATTSTAABR 522209 1" 150G A/O SOCATTSTAABR 522210 1" 180G A/O SOCATTSTAABR 522211 1" 240G A/O SOCATTSTAABR 522212 1" 320G A/O SOCATTSTAABR 522301 1-1/2" 24G A/O SOCATTSTAABR 522302 1-1/2" 36G A/O SOCATTSTAABR 522303 1-1/2" 40G A/O SOCATTSTAABR 522304 1-1/2" 50G A/O SOCATTSTAABR 522305 1-1/2" 60G A/O SOCATTSTAABR 522306 1-1/2" 80G A/O SOCATTSTAABR 522307 1-1/2" 100G A/O SOCATTSTAABR 522308 1-1/2120G A/O SOCATTSTAABR 522309 1-1/2" 150G A/O SOCATTSTAABR 522310 1-1/2" 2180G A/O SOCATTSTAABR 522311 1-1/2" 240G A/O SOCATTSTAABR 522312 1-1/2 320G A/O SOCATTSTAABR 522401 2" 24G A/O SOCATTSTAABR 522402 2" 36G A/O SOCATTSTAABR 522403 2" 40G A/O SOCATTSTAABR 522404 2" 50G A/O SOCATTSTAABR 522405 2" 60G A/O SOCATTSTAABR 522406 2" 80G A/O SOCATTSTAABR 522407 2" 100G A/O SOCATTSTAABR 522408 2" 120G A/O SOCATTSTAABR 522409 2" 150G A/O SOCATTSTAABR 522410 2" 2180G A/O SOCATTSTAABR 522411 2" 240G A/O SOCATTSTAABR 522412 2" 320G A/O SOCATTSTAABR 522501 3" 24G A/O SOCATTSTAABR 522502 3" 36G A/O SOCATTSTAABR 522503 3" 40G A/O SOCATTSTAABR 522504 3" 50G A/O SOCATTSTAABR 522505 3" 60G A/O SOCATTSTAABR 522506 3" 80G A/O SOCATT

Phone: 402-455-6151Toll Free: 800-488-9699

45

Brushes

Wire Brushes Brushes, Power Wheel

Discs, Type 27

Discs, Quick Change SocAtt, A/O

Abras

ives &

Brus

hes

Abrasives

STAABR 522507 3" 100G A/O SOCATTPartNo Description

STAABR 522508 3" 120G A/O SOCATTSTAABR 522509 3" 150G A/O SOCATTSTAABR 522510 3" 2180G A/O SOCATTSTAABR 522511 3" 240G A/O SOCATTSTAABR 522512 3" 320G A/O SOCATT

COLOR: Brown RPM RATINGS The maximum allowable RPM for Quick Change SocAtt, Lockit & ClickOn discs is the same as the maximum RPM of the holder pad used to drive the discs, provided the holder pad and the disc are the same nominal diameter. APPLICATIONS: BEST DISC FOR: General purpose grinding, deburring, and blending on ferrous metals. Our most popular type disc. Ideal for flat or contour surfaces. Most commonly used are grits 36-50 for weld removal. Grits 60-120 for removal of imperfections and blending. STAABR 592201 1" 24G LOCKITPartNo Description

STAABR 592202 1" 36G LOCKITSTAABR 592203 1" 40G LOCKITSTAABR 592204 1" 50G LOCKITSTAABR 592205 1" 60G LOCKITSTAABR 592206 1" 80G LOCKITSTAABR 592207 1" 100G LOCKITSTAABR 592208 1" 120G LOCKITSTAABR 592209 1" 150G LOCKITSTAABR 592210 1" 180G LOCKITSTAABR 592211 1" 240G LOCKITSTAABR 592212 1" 320G LOCKITSTAABR 52301 1-1/2" 24G LOCKITSTAABR 52302 1-1/2" 36G LOCKITSTAABR 52303 1-1/2" 40G LOCKITSTAABR 52304 1-1/2" 50G LOCKITSTAABR 52305 1-1/2" 60G LOCKITSTAABR 52306 1-1/2" 80G LOCKITSTAABR 52307 1-1/2" 100G LOCKITSTAABR 52308 1-1/2" 120G LOCKITSTAABR 52309 1-1/2" 150G LOCKITSTAABR 52310 1-1/2" 180G LOCKITSTAABR 52311 1-1/2" 240G LOCKITSTAABR 52312 1-1/2" 320G LOCKITSTAABR 592401 2" 24G LOCKITSTAABR 592402 2" 36G LOCKITSTAABR 592403 2" 40G LOCKITSTAABR 592404 2" 50G LOCKITSTAABR 592405 2" 60G LOCKITSTAABR 592406 2" 80G LOCKITSTAABR 592407 2" 100G LOCKITSTAABR 592408 2" 120G LOCKITSTAABR 592409 2" 150G LOCKITSTAABR 592410 2" 180G LOCKITSTAABR 592411 2" 240G LOCKITSTAABR 592412 2" 320G LOCKITSTAABR 592501 3" 24G LOCKITSTAABR 592502 3" 36G LOCKITSTAABR 592503 3" 40G LOCKITSTAABR 592504 3" 50G LOCKITSTAABR 592505 3" 60G LOCKIT

STAABR 592506 3" 80G LOCKITPartNo Description

STAABR 592507 3" 100G LOCKITSTAABR 592508 3" 120G LOCKITSTAABR 592509 3" 150G LOCKITSTAABR 592510 3" 180G LOCKITSTAABR 592511 3" 240G LOCKITSTAABR 592512 3" 320G LOCKIT

COLOR: Brown RPM RATINGS The maximum allowable RPM for Quick Change SocAtt, Lockit & ClickOn discs is the same as the maximum RPM of the holder pad used to drive the discs, provided the holder pad and the disc are the same nominal diameter.

APPLICATIONS: BEST DISC FOR: General purpose grinding, deburring, and blending on ferrous metals. Our most popular type disc. Ideal for flat or contour surfaces. Most commonly used are grits 36-50 for weld removal. Grits 60-120 for removal of imperfections and blending.

STAABR 572302 1-1/2" 36G CLICKONPartNo Description

STAABR 572303 1-1/2" 40G CLICKONSTAABR 572304 1-1/2" 50G CLICKONSTAABR 572305 1-1/2" 60G CLICKONSTAABR 572306 1-1/2" 80G CLICKONSTAABR 572307 1-1/2" 100G CLICKONSTAABR 572308 1-1/2" 120G CLICKONSTAABR 572309 1-1/2" 150G CLICKONSTAABR 572310 1-1/2" 180G CLICKONSTAABR 572311 1-1/2" 240G CLICKONSTAABR 572312 1-1/2" 320G CLICKONSTAABR 572402 2" 36G CLICKONSTAABR 572403 2" 40G CLICKONSTAABR 572404 2" 50G CLICKONSTAABR 572405 2" 60G CLICKONSTAABR 572406 2" 80G CLICKONSTAABR 572407 2" 100G CLICKONSTAABR 572408 2" 120G CLICKONSTAABR 572409 2" 150G CLICKONSTAABR 572410 2" 180G CLICKONSTAABR 572411 2" 240G CLICKONSTAABR 572412 2" 320G CLICKONSTAABR 572502 3" 36G CLICKONSTAABR 572503 3" 40G CLICKONSTAABR 572504 3" 50G CLICKONSTAABR 572505 3" 60G CLICKONSTAABR 572506 3" 80G CLICKONSTAABR 572507 3" 100G CLICKONSTAABR 572508 3" 120G CLICKONSTAABR 572509 3" 150G CLICKONSTAABR 572510 3" 180G CLICKONSTAABR 572511 3" 240G CLICKONSTAABR 572512 3" 320G CLICKON

Phone: 402-455-6151Toll Free: 800-488-9699

46

Call Industrial Sales at 800-488-9699

Discs, Quick Change SocAtt, A/O

Discs, Quick Change Lockit, A/O

Discs, Quick Change ClickOn A/O

Abrasives & Brushes

COLOR: Blue APPLICATIONS: •Best disc for: Hastalloy, Inconel, Titanium, and other exotic metals, including composites and fiberglass. •Quick stock removal for tough grinding applications. •Best performance when heavy pressure is applied. FEATURES: •Variety of Quick Change fastening systems. •Premium grain. BENEFITS: •Instant disc changes. •Smooth running. •Disc is centered. •Durable. •Aggressive stock removal. STAABR 522227 1" 40G SOCATTPartNo Description

STAABR 522228 1" 50G SOCATTSTAABR 522229 1" 60G SOCATTSTAABR 522230 1" 80G SOCATTSTAABR 522231 1" 100G SOCATTSTAABR 522232 1" 120G SOCATTSTAABR 522326 1-1/2" 36G SOCATTSTAABR 522327 1-1/2" 40G SOCATTSTAABR 522328 1-1/2" 50G SOCATTSTAABR 522329 1-1/2" 60G SOCATTSTAABR 522330 1-1/2" 80G SOCATTSTAABR 522331 1-1/2" 100G SOCATTSTAABR 522332 1-1/2" 120G SOCATTSTAABR 522426 2" 36G SOCATTSTAABR 522427 2" 40G SOCATTSTAABR 522428 2" 50G SOCATTSTAABR 522429 2" 60G SOCATTSTAABR 522430 2" 80G SOCATTSTAABR 522431 2" 100G SOCATTSTAABR 522432 2" 120G SOCATTSTAABR 522526 3" 36G SOCATTSTAABR 522527 3" 40G SOCATTSTAABR 522528 3" 50G SOCATTSTAABR 522529 3" 60G SOCATTSTAABR 522530 3" 80G SOCATTSTAABR 522531 3" 100G SOCATTSTAABR 522532 3" 120G SOCATT

COLOR: Red APPLICATIONS: •Best disc for: Cool, rapid stock removal on all heat sensitive metals, including Stainless Steel and High Nickel Alloys. Highest edge durability in the industry. •Highest rate of cut of all Quick Change discs. •Ideal for prolonged edge work. •Highest stock removal on flat surfaces. •Stiffness equal ro Resin Fiber disc. FEATURES: •Stiff, durable backing •Cooler running •High ratio blended ceramic grain BENEFITS: •Maintains high cut rate on edges without grain shedding or tearing •Reduces risk of loading •Cuts faster and lasts longer than all Ceramic Quick Change discs STAABR 524480 2" 24G SOCATTPartNo Description

STAABR 524481 2" 36G SOCATT

STAABR 524482 2" 40G SOCATTPartNo Description

STAABR 524483 2" 50G SOCATTSTAABR 524484 2" 60G SOCATTSTAABR 524485 2" 80G SOCATTSTAABR 524580 3" 24G SOCATTSTAABR 524581 3" 36G SOCATTSTAABR 524582 3" 40G SOCATTSTAABR 524583 3" 50G SOCATTSTAABR 524584 3" 60G SOCATTSTAABR 524585 3" 80G SOCATTSTAABR 524680 4" 24G SOCATTSTAABR 524681 4" 36G SOCATTSTAABR 524682 4" 40G SOCATTSTAABR 524683 4" 50G SOCATTSTAABR 524684 4" 60G SOCATT

COLOR: Black APPLICATIONS: •Best disc for: Non-ferrous (free of iron) materials. •Most commonly used are grits 36-50 for weld removal. Grits 60-120 are used for removal of imperfections and blending. FEATURES: •Variety of Quick Change fastening systems.

STAABR 522215 1" 40G SOCATTPartNo Description

STAABR 522216 1" 50G SOCATTSTAABR 522217 1" 60G SOCATTSTAABR 522218 1" 80G SOCATTSTAABR 522219 1" 100G SOCATTSTAABR 522220 1" 120G SOCATTSTAABR 522221 1" 150G SOCATTSTAABR 522222 1" 180G SOCATTSTAABR 522223 1" 240G SOCATTSTAABR 522314 1-1/2" 36G SOCATTSTAABR 522315 1-1/2" 40G SOCATTSTAABR 522316 1-1/2" 50G SOCATTSTAABR 522317 1-1/2" 60G SOCATTSTAABR 522318 1-1/2" 80G SOCATTSTAABR 522319 1-1/2" 100G SOCATTSTAABR 522320 1-1/2" 120G SOCATTSTAABR 522321 1-1/2" 150G SOCATTSTAABR 522322 1-1/2" 180G SOCATTSTAABR 522323 1-1/2" 240G SOCATTSTAABR 522414 2" 36G SOCATTSTAABR 522415 2" 40G SOCATTSTAABR 522416 2" 50G SOCATTSTAABR 522417 2" 60G SOCATTSTAABR 522418 2" 80G SOCATTSTAABR 522419 2" 100G SOCATTSTAABR 522420 2" 120G SOCATTSTAABR 522421 2" 150G SOCATTSTAABR 522422 2" 180G SOCATTSTAABR 522423 2" 240G SOCATTSTAABR 522513 3" 24G SOCATTSTAABR 522514 3" 36G SOCATTSTAABR 522515 3" 40G SOCATTSTAABR 522516 3" 50G SOCATTSTAABR 522517 3" 60G SOCATTSTAABR 522518 3" 80G SOCATTSTAABR 522519 3" 100G SOCATTSTAABR 522520 3" 120G SOCATTSTAABR 522521 3" 150G SOCATTSTAABR 522522 3" 180G SOCATTSTAABR 522523 3" 240G SOCATT

Phone: 402-455-6151Toll Free: 800-488-9699

47


Abrasives Discs, Quick Change SocAtt, Norzon®

Discs, Quick Change SocAtt, Ceramic

Discs, Quick Change SocAtt, Silicone Carbide

Abras

ives &

Brus

hes

Discs, Quick Change SocAtt SOFTEDGE

COLOR: Brown APPLICATIONS: •Best disc for: General purpose grinding, deburring, and blending of ferrous metals where greater edge flexibility is required. •Ideal for contoured and difficult to reach surfaces. •Used for maximum possible cut rate and stock removal without damaging the radius or surface transition. •Best performance in reducing heavy mill marks in step areas, corners and transitional surfaces. RPM RATINGS The maximum allowable RPM for Quick Change SoftEdge SocAtt Discs is the same as the maximum RPM of the holder pad used to drive the discs. FEATURES: •Quick Change locking device (SocAtt only) •Flexible edge •Premium Aluminum Oxide grain •2 Ply Construction BENEFITS: •Instant disc changes •No tools necessary to change discs •Bends to stock contour •Reduces gouging or undercutting •Controlled stock removal •Ease of use •Eliminates edge fraying and tearing •Fast rate of cut •Most durable STAABR 523204 1" 50G SOCATT SOFTEDGEPartNo Description

STAABR 523205 1" 60G SOCATT SOFTEDGESTAABR 523206 1" 80G SOCATT SOFTEDGESTAABR 523207 1" 100G SOCATT SOFTEDGESTAABR 523208 1" 120G SOCATT SOFTEDGESTAABR 523209 1" 150G SOCATT SOFTEDGESTAABR 523210 1" 180G SOCATT SOFTEDGESTAABR 523211 1" 240G SOCATT SOFTEDGESTAABR 523212 1" 320G SOCATT SOFTEDGESTAABR 523304 1-1/2" 50G SOCATT SOFTEDGESTAABR 523305 1-1/2" 60G SOCATT SOFTEDGESTAABR 523306 1-1/2" 80G SOCATT SOFTEDGESTAABR 523307 1-1/2" 100G SOCATT SOFTEDGESTAABR 523308 1-1/2" 120G SOCATT SOFTEDGESTAABR 523309 1-1/2" 150G SOCATT SOFTEDGESTAABR 523310 1-1/2" 180G SOCATT SOFTEDGESTAABR 523311 1-1/2" 240G SOCATT SOFTEDGESTAABR 523312 1-1/2" 320G SOCATT SOFTEDGESTAABR 523404 2" 50G SOCATT SOFTEDGESTAABR 523405 2" 60G SOCATT SOFTEDGESTAABR 523406 2" 80G SOCATT SOFTEDGESTAABR 523407 2" 100G SOCATT SOFTEDGESTAABR 523408 12 120G SOCATT SOFTEDGESTAABR 523409 2" 150G SOCATT SOFTEDGESTAABR 523410 2" 180G SOCATT SOFTEDGESTAABR 523411 2" 240G SOCATT SOFTEDGESTAABR 523412 2" 320G SOCATT SOFTEDGESTAABR 523504 3" 50G SOCATT SOFTEDGESTAABR 523505 3" 60G SOCATT SOFTEDGESTAABR 523506 3" 80G SOCATT SOFTEDGESTAABR 523507 3" 100G SOCATT SOFTEDGESTAABR 523508 3" 120G SOCATT SOFTEDGE

STAABR 523509 3" 150G SOCATT SOFTEDGEPartNo Description

STAABR 523510 3" 180G SOCATT SOFTEDGESTAABR 523511 3" 240G SOCATT SOFTEDGESTAABR 523512 3" 320G SOCATT SOFTEDGE

APPLICATIONS: •Best disc for: Achieving quality finishes, without sacrificing cut rates, on hard-to-grind surfaces. •Used for wet grinding, honing and polishing. •Best performance in blending and finishing composite parts, ceramics, stone and glass. FEATURES: •Variety of fastening systems •Full range of Nickel micron rated grades •Diamond material BENEFITS: •Instant disc changes •No tools necessary to change discs •Best selection for specific applications •Speeds up production •Increases productivity •Provides a more consistent finish STAABR 896221 2" 60G LOCKIT FLEXIBLE DIAMOND DISC 250 GreenPartNo Description Micron Color

STAABR 896222 2" 120G LOCKIT FLEXIBLE DIAMOND DISC 125 BlackSTAABR 896223 2" 200G LOCKIT FLEXIBLE DIAMOND DISC 74 RedSTAABR 896224 2" 600G LOCKIT FLEXIBLE DIAMOND DISC 40-50 YellowSTAABR 896225 2" 800G LOCKIT FLEXIBLE DIAMOND DISC 20-30 WhiteSTAABR 896226 2" 1800G LOCKIT FLEXIBLE DIAMOND

DISC6-12 Blue

STAABR 896321 3" 60G LOCKIT FLEXIBLE DIAMOND DISC 250 GreenSTAABR 896322 3" 120G LOCKIT FLEXIBLE DIAMOND DISC 125 BlackSTAABR 896323 3" 200G LOCKIT FLEXIBLE DIAMOND DISC 74 RedSTAABR 896324 3" 600G LOCKIT FLEXIBLE DIAMOND DISC 40-50 YellowSTAABR 896325 3" 800G LOCKIT FLEXIBLE DIAMOND DISC 20-30 WhiteSTAABR 896326 3" 1800G LOCKIT FLEXIBLE DIAMOND

DISC6-12 Blue

Phone: 402-455-6151Toll Free: 800-488-9699

48

Your Midwest Distributor for over 96 Years

Abrasives

Discs, Lockit Flexible Diamond

Abrasives & Brushes

Abrasives

COLOR: Brown APPLICATIONS: BEST DISC FOR: Removing welds and imperfections along with blending and finishing larger surface areas on ferrous metals. •RPM RATINGS: The maximum allowable RPM for Resin Fibre Discs is the same as the maximum RPM of the holder pad used to drive the discs, provided the holder pad and the disc are the same nominal diameter.

FEATURES: •Closed-coat Aluminum Oxide resin bond •Strong 30 mil fibre backing •7/8" center hole

BENEFITS: •Durable and aggressive •Versatile

STAABR 530001 4-1/2"X7/8" 16G ALUMINUM OXIDE DISCPartNo Description

STAABR 530002 4-1/2"X7/8" 24G ALUMINUM OXIDE DISCSTAABR 530003 4-1/2"X7/8" 36G ALUMINUM OXIDE DISCSTAABR 530004 4-1/2"X7/8" 50G ALUMINUM OXIDE DISCSTAABR 530005 4-1/2"X7/8" 60G ALUMINUM OXIDE DISCSTAABR 530006 4-1/2"X7/8" 80G ALUMINUM OXIDE DISCSTAABR 530007 4-1/2"X7/8" 100G ALUMINUM OXIDE DISCSTAABR 530008 4-1/2"X7/8" 120G ALUMINUM OXIDE DISCSTAABR 530101 5"X7/8" 16G ALUMINUM OXIDE DISCSTAABR 530102 5"X7/8" 24G ALUMINUM OXIDE DISCSTAABR 530103 5"X7/8" 36G ALUMINUM OXIDE DISCSTAABR 530104 5"X7/8" 50G ALUMINUM OXIDE DISCSTAABR 530105 5"X7/8" 60G ALUMINUM OXIDE DISCSTAABR 530106 5"X7/8" 80G ALUMINUM OXIDE DISCSTAABR 530107 5"X7/8" 100G ALUMINUM OXIDE DISCSTAABR 530108 5"X7/8" 120G ALUMINUM OXIDE DISCSTAABR 530201 7"X7/8" 16G ALUMINUM OXIDE DISCSTAABR 530202 7"X7/8" 24G ALUMINUM OXIDE DISCSTAABR 530203 7"X7/8" 36G ALUMINUM OXIDE DISCSTAABR 530204 7"X7/8" 50G ALUMINUM OXIDE DISCSTAABR 530205 7"X7/8" 60G ALUMINUM OXIDE DISCSTAABR 530206 7"X7/8" 80G ALUMINUM OXIDE DISCSTAABR 530207 7"X7/8" 100G ALUMINUM OXIDE DISCSTAABR 530208 7"X7/8" 120G ALUMINUM OXIDE DISCSTAABR 530401 9-1/8"X7/8" 16G ALUMINUM OXIDE DISCSTAABR 530402 9-1/8"X7/8" 24G ALUMINUM OXIDE DISCSTAABR 530403 9-1/8"X7/8" 36G ALUMINUM OXIDE DISCSTAABR 530404 9-1/8"X7/8" 50G ALUMINUM OXIDE DISCSTAABR 530405 9-1/8"X7/8" 60G ALUMINUM OXIDE DISCSTAABR 530406 9-1/8"X7/8" 80G ALUMINUM OXIDE DISCSTAABR 530407 9-1/8"X7/8" 100G ALUMINUM OXIDE DISCSTAABR 530408 9-1/8"X7/8" 120G ALUMINUM OXIDE DISC

COLOR: Red

APPLICATIONS: •Cool, rapid stock removal on all heat-sensitive metals, including Stainless Steel and High Nickel Alloys. Highest edge durability in the industry. •Edge deburring and blending. •Weld removal on fabricated Stainless Steel. •Heavy flash and parting line removal on castings. •Grinding heavy machine tool marks. •Grinding and blending welds on large turbine blades. •Use on Stainless Steel, Aluminum, High Nickel Alloys, Steel, Titanium.

FEATURES: •Pinnacle Resin Fiber grain •High ratio blended Ceramic Oxide grain •Heavy, durable fiber backing •Self-lubricating grinding layer

BENEFITS: •Easy grain regeneration •Highest durability of premium discs •Fastest stock removal of premium discs •Ceramic grain for cutting •Aluminum Oxide for support grain •Superior grain support •Ideal for prolonged stock removal •Reduces heat during grinding process •Reduces glazing, loading and stripping

STAABR 530032 4-1/2"X7/8" 24G PINNACLE RESIN FIBRE DISCPartNo Description

STAABR 530033 4-1/2"X7/8" 36G PINNACLE RESIN FIBRE DISCSTAABR 530034 4-1/2"X7/8" 40G PINNACLE RESIN FIBRE DISCSTAABR 530035 4-1/2"X7/8" 50G PINNACLE RESIN FIBRE DISCSTAABR 530036 4-1/2"X7/8" 60G PINNACLE RESIN FIBRE DISCSTAABR 530132 5"X7/8" 24G PINNACLE RESIN FIBRE DISCSTAABR 530133 5"X7/8" 36G PINNACLE RESIN FIBRE DISCSTAABR 530134 5"X7/8" 40G PINNACLE RESIN FIBRE DISCSTAABR 530135 5"X7/8" 50G PINNACLE RESIN FIBRE DISCSTAABR 530136 5"X7/8" 60G PINNACLE RESIN FIBRE DISCSTAABR 530232 7"X7/8" 24G PINNACLE RESIN FIBRE DISCSTAABR 530233 7"X7/8" 36G PINNACLE RESIN FIBRE DISCSTAABR 530234 7"X7/8" 40G PINNACLE RESIN FIBRE DISCSTAABR 530235 7"X7/8" 50G PINNACLE RESIN FIBRE DISCSTAABR 530236 7"X7/8" 60G PINNACLE RESIN FIBRE DISCSTAABR 531032 4-1/2" 24G PINNACLE RESIN FIBRE DISCSTAABR 531033 4-1/2" 36G PINNACLE RESIN FIBRE DISCSTAABR 531034 4-1/2" 40G PINNACLE RESIN FIBRE DISCSTAABR 531035 4-1/2" 50G PINNACLE RESIN FIBRE DISCSTAABR 531036 4-1/2" 60G PINNACLE RESIN FIBRE DISCSTAABR 531311 5" 24G PINNACLE RESIN FIBRE DISCSTAABR 531312 5" 36G PINNACLE RESIN FIBRE DISCSTAABR 531313 5" 40G PINNACLE RESIN FIBRE DISCSTAABR 531314 5" 50G PINNACLE RESIN FIBRE DISCSTAABR 531315 5" 60G PINNACLE RESIN FIBRE DISCSTAABR 531321 7" 24G PINNACLE RESIN FIBRE DISCSTAABR 531322 7" 36G PINNACLE RESIN FIBRE DISCSTAABR 531323 7" 40G PINNACLE RESIN FIBRE DISCSTAABR 531324 7" 50G PINNACLE RESIN FIBRE DISCSTAABR 531325 7" 60G PINNACLE RESIN FIBRE DISC

Discs, Pinnacle Resin Fiber

Phone: 402-455-6151Toll Free: 800-488-9699

49

Discs, Aluminum Oxide Resin Fibre

Abras

ives &

Brus

hes

APPLICATIONS: •Best disc for: Rapid, aggressive stock removal on a variety of welds, castings and other metal fabrication applications. •High stock removal on metal cabinets, corners and flats. •Removing cutting torch slag from steel plate. RPM RATINGS: 4 STAABR 645053 4-1/2"X7/8" 36G A/O RESIN BONDPartNo Description

STAABR 645054 4-1/2"X7/8" 40G A/O RESIN BONDSTAABR 645056 4-1/2"X7/8" 60G A/O RESIN BONDSTAABR 645057 4-1/2"X7/8" 80G A/O RESIN BONDSTAABR 645253 7"X7/8" 36G A/O RESIN BONDSTAABR 645254 7"X7/8" 40G A/O RESIN BONDSTAABR 645256 7"X7/8" 60G A/O RESIN BONDSTAABR 645257 7"X7/8" 80G A/O RESIN BONDSTAABR 645063 4-1/2"X7/8" 36G ZIRCONIA ALUMINASTAABR 645064 4-1/2"X7/8" 40G ZIRCONIA ALUMINASTAABR 645066 4-1/2"X7/8" 60G ZIRCONIA ALUMINASTAABR 645067 4-1/2"X7/8" 80G ZIRCONIA ALUMINASTAABR 645263 7"X7/8" 36G ZIRCONIA ALUMINASTAABR 645264 7"X7/8" 40G ZIRCONIA ALUMINASTAABR 645266 7"X7/8" 60G ZIRCONIA ALUMINASTAABR 645267 7"X7/8" 80G ZIRCONIA ALUMINASTAABR 645323 4-1/2"X7/8" 36G POWER ZIRCSTAABR 645324 4-1/2"X7/8" 40G POWER ZIRCSTAABR 645326 4-1/2"X7/8" 60G POWER ZIRCSTAABR 645327 4-1/2"X7/8" 80G POWER ZIRCSTAABR 645423 7"X7/8" 36G POWER ZIRCSTAABR 645424 7"X7/8" 40G POWER ZIRCSTAABR 645426 7"X7/8" 60G POWER ZIRCSTAABR 645427 7"X7/8" 80G POWER ZIRC

APPLICATIONS: •Best disc for: Rapid, aggressive stock removal on a variety of welds, castings and other metal fabrication applications. •High stock removal on metal cabinets, corners and flats. •Removing cutting torch slag from steel plate. RPM RATINGS: 4

STAABR 645653 4-1/2"X5/8-11 36G A/O RESIN BONDPartNo Description

STAABR 645654 4-1/2"X5/8-11 40G A/O RESIN BONDSTAABR 645656 4-1/2"X5/8-11 60G A/O RESIN BONDSTAABR 645657 4-1/2"X5/8-11 80G A/O RESIN BONDSTAABR 645753 7"X5/8-11 36G A/O RESIN BONDSTAABR 645754 7"X5/8-11 40G A/O RESIN BONDSTAABR 645756 7"X5/8-11 60G A/O RESIN BONDSTAABR 645757 7"X5/8-11 80G A/O RESIN BONDSTAABR 645662 4-1/2"X5/8-11 24G ZIRCONIA ALUMINASTAABR 645663 4-1/2"X5/8-11 36G ZIRCONIA ALUMINASTAABR 645664 4-1/2"X5/8-11 40G ZIRCONIA ALUMINASTAABR 645666 4-1/2"X5/8-11 60G ZIRCONIA ALUMINASTAABR 645667 4-1/2"X5/8-11 80G ZIRCONIA ALUMINASTAABR 645762 7"X5/8-11 24G ZIRCONIA ALUMINASTAABR 645763 7"X5/8-11 36G ZIRCONIA ALUMINASTAABR 645764 7"X5/8-11 40G ZIRCONIA ALUMINASTAABR 645766 7"X5/8-11 60G ZIRCONIA ALUMINASTAABR 645767 7"X5/8-11 80G ZIRCONIA ALUMINA

FOR ALL QUICK CHANGE STYLE DISCS (Coated, BriteRite, and Diamond) APPLICATIONS: •Soft grade - Fine finishing and contouring. •Medium grade - General purpose work. •Firm grade - Heavy stock removal. FEATURES: •Top quality construction. Hard face style has a molded phenolic face •Metal-threaded center •Larger pads have molded grip BENEFITS: •Improved grinding •Cool running •Snag-free •Easy on/easy off •Ease of handling

STAABR 541001 FOR SMALL DIAMETER SOCATTDISCS PAD ONLY

SM 3/4" Medium 40,000PartNo Description Description/

DiameterDensity Max. RPM


SM 1" Medium 40,000STAABR 541003 FOR SMALL DIAMETER SOCATT

DISCS PAD ONLYSS 1-1/2" Soft 20,000


SM 1-1/2" Medium 25,000STAABR 541005 FOR SMALL DIAMETER SOCATT

DISCS PAD ONLYSF 1-1/2" Firm 30,000


SS 2" Soft 20,000STAABR 541007 FOR SMALL DIAMETER SOCATT

DISCS PAD ONLYSM 2" Medium 25,000


SF 2" Firm 30,000STAABR 541009 FOR SMALL DIAMETER SOCATT

DISCS PAD ONLYSS 3" Soft 12,000



DISCS PAD ONLYSF 3" Firm 20,000


SM 4" MediumSTAABR 541014 FOR SMALL DIAMETER SOCATT

DISCS PAD ONLYSM 5" Medium

STAABR 546003 FOR SMALL DIAMETER LOCKITDISCS PAD ONLY

LS 1-1/2" Soft 20,000STAABR 546004 FOR SMALL DIAMETER LOCKIT

DISCS PAD ONLYLM 1-1/2" Medium 25,000


LF 1-1/2" Firm 30,000STAABR 546006 FOR SMALL DIAMETER LOCKIT

DISCS PAD ONLYLS 2" Soft 20,000


LM 2" Medium 25,000STAABR 546008 FOR SMALL DIAMETER LOCKIT

DISCS PAD ONLYLF 2" Firm 30,000


LS 3" Soft 12,000STAABR 546010 FOR SMALL DIAMETER LOCKIT

DISCS PAD ONLYLM 3" Medium 20,000


LF 3" Firm 20,000STAABR 541051 FOR SMALL DIAMETER SOCATT

DISCS W/TA4 MANDRELSM 3/4" Medium 40,000

STAABR 541052 FOR SMALL DIAMETER SOCATTDISCS W/TA4 MANDREL


DISCS W/TA4 MANDRELSS 1-1/2" Soft 20,000

Phone: 402-455-6151Toll Free: 800-488-9699

50

Abrasives Discs, Flap, Plain Center

Discs, Flap, Threaded Adapter

Abrasive Disc Accessories Pads, Holder, For SocAtt, Lockit & ClickOn Discs

Abrasives & Brushes

Abrasives


SF 1-1/2" Firm 30,000PartNo Description Description/

DiameterDensity Max. RPM


SS 2" Soft 20,000STAABR 541057 FOR SMALL DIAMETER SOCATT

DISCS W/TA4 MANDRELSM 2" Medium 25,000


SF 2" Firm 30,000STAABR 541059 FOR SMALL DIAMETER SOCATT

DISCS W/TA4 MANDRELSS 3" Soft 12,000



DISCS W/TA4 MANDRELSF 3" Firm 20,000


SM 4" MediumSTAABR 541064 FOR SMALL DIAMETER SOCATT

DISCS W/TA4 MANDRELSM 5" Medium

STAABR 546053 FOR SMALL DIAMETER LOCKITDISCS W/TA4 MANDREL

LS 1-1/2" Soft 20,000STAABR 546054 FOR SMALL DIAMETER LOCKIT

DISCS W/TA4 MANDRELLM 1-1/2" Medium 25,000


LF 1-1/2" Firm 30,000STAABR 546056 FOR SMALL DIAMETER LOCKIT

DISCS W/TA4 MANDRELLS 2" Soft 20,000


LM 2" Medium 25,000STAABR 546058 FOR SMALL DIAMETER LOCKIT

DISCS W/TA4 MANDRELLF 2" Firm 30,000


LS 3" Soft 12,000STAABR 546060 FOR SMALL DIAMETER LOCKIT

DISCS W/TA4 MANDRELLM 3" Medium 20,000


LF 3" Firm 20,000STAABR 541054 FOR SMALL DIAMETER SOFTEDGE

SOCATT DISCS W/TA4 MANDRELSM 1-1/2" Medium 25,000

STAABR 548054 FOR SMALL DIAMETER LOCKITCLICKON DISCS W/TA4 MANDREL

PM 1-1/2" Medium 25,000STAABR 548057 FOR SMALL DIAMETER LOCKIT

CLICKON DISCS W/TA4 MANDRELPM 2" Medium 25,000

STAABR 548060 FOR SMALL DIAMETER LOCKITCLICKON DISCS W/TA4 MANDREL

PM 3" Medium 20,000STAABR 541357 FOR SMALL DIAMETER SOCATT

EDGEPRO DISCS W/TA4 MANDRELCDS 2" Medium

STAABR 541360 FOR SMALL DIAMETER SOCATTEDGEPRO DISCS W/TA4 MANDREL

CDS 3" MediumSTAABR 546357 FOR SMALL DIAMETER LOCKIT

EDGEPRO DISCS W/TA4 MANDRELCDS 2" Medium

STAABR 546360 FOR SMALL DIAMETER LOCKITEDGEPRO DISCS W/TA4 MANDREL

CDS 3" Medium

FOR ALL QUICK CHANGE STYLE DISCS (Coated, BriteRite, and Diamond) APPLICATIONS: •Soft grade - Fine finishing and contouring. •Medium grade - General purpose work. •Firm grade - Heavy stock removal. FEATURES: •Top quality construction. Hard face style has a molded phenolic face •Metal-threaded center •Larger pads have molded grip BENEFITS: •Improved grinding •Cool running •Snag-free •Easy on/easy off •Ease of handling

STAABR 543629 FOR LARGE DIAMETER DISCS -HARD FACE

BD 45 F Medium 18,000 4-1/2"PartNo Description Description/

DiameterDensity Max.

RPMSize


SM 45 F Medium 18,000 4-1/2"STAABR 543628 FOR LARGE DIAMETER DISCS -

HARD FACEBD 55 F Medium 18,000 5"


SM 55 F Medium 18,000 5"STAABR 543602 FOR LARGE DIAMETER DISCS -

HARD FACESS 7 Soft 7,000 7"


SM 7 Medium 7,500 7"STAABR 543604 FOR LARGE DIAMETER DISCS -

HARD FACESF 7 Firm 8,500 7"


SM 9 Medium 7,000 9"STAABR 543607 FOR LARGE DIAMETER DISCS -

HARD FACESF 9 Firm 7,500 9"

FOR ALL QUICK CHANGE STYLE DISCS (Coated and Diamond) APPLICATIONS: •Optimum performance with PSA Discs. •Perfect for all contour applications. FEATURES: •Lightweight, Flex-tested pad. •High-rated RPMs. BENEFITS: •Reduces operator fatigue. •Less wear on air tools •Fast, smooth handling

STAABR 719994 1/2" PSA DISC 1/4 18,000PartNo Description Shank

Dia. In.Max. RPM

STAABR 719993 3/4" PSA DISC 1/4 18,000STAABR 719995 1" PSA DISC 1/4 15,000STAABR 719996 1-1/2" PSA DISC 1/4 15,000STAABR 719997 2" PSA DISC 1/4 12,000STAABR 719998 3" PSA DISC 1/4 10,000STAABR 719999 4" PSA DISC 1/4 7,000STAABR 712000 5" PSA DISC 1/4 5,000

APPLICATIONS: •For use on Hook & Loop (Velcro®) plain style BriteRite FE, GP and rapid cut surface conditioning & deburring discs and GP buff & blend discs. •Soft, cushioned backing for versatile use on flat and contoured surfaces. •Available with 5/8" button for most durable connection and centering. FEATURES: •Hook & Loop •BENEFITS: •Quick disc changes STAABR 840020 2" HOOK & LOOP STYLE 22,000PartNo Description Max. RPM

Pads, Holder, For Large Diameter Discs - HardFace

Pads, Holder, For PSA Discs

Pads, Holder - Hook & Loop Style

Phone: 402-455-6151Toll Free: 800-488-9699

51

For Additional Product Information

Call Industrial Sales at 800-488-9699 or visit

www.johnday.com

Abrasive Disc Accessories Pads, Holder, For SocAtt, Lockit & ClickOn Discs

Abras

ives &

Brus

hes

Pads, Holder - Hook & Loop Style

STAABR 840030 3" HOOK & LOOP STYLE 18,000PartNo Description Max. RPM

STAABR 840042 4-1/2" HOOK & LOOP STYLE 10,000STAABR 840050 5" HOOK & LOOP STYLE 10,000STAABR 840070 7" HOOK & LOOP STYLE 6,000

Pad Mandrels for Small Diameter Holder PadSTAABR 540013 TA4 1/4" MandrelPartNo Description Size

STAABR 540025 TA6 6MM MandrelSTAABR 541034 1/4" Trackman Mandrel

Pad Mandrels for Large Diameter Holder PadSTAABR 547003 5/8-11 M x 3/8-24FPartNo Size

STAABR 547008 5/8-11 M x 5/8-11FSTAABR 547024 5/8-11 M x 1/2-13

Mandrels for Unitized Wheels

STAABR 850034 STEEL (A) 7/8" 1/4" 1" 1"

PartNo Description ShankLength

ShankDia.In.

For use withwheel

diameterFor use with

wheelthickness

STAABR 850024 THREADED HEAD (B) 7/8" 1/4" 1-1/4 - 4" 1/8 - 1/2"STAABR 850025 THREADED HEAD (C) 7/8" 1/4" 1-1/2 - 4" 1/2 - 1"STAABR 850030 REGULAR (D) 1-1/4" 1/4" 6" 1/2 - 1"STAABR 850029 COMBINATION (E) 1/4" 1-1/4 - 6" 1/8 - 1"

Adapters for Flap WheelsSTAABR 600055 1/4" male 3-1/2 - 5"PartNo Size For use on wheel size

STAABR 600056 3/8" male 3-1/2 - 8"STAABR 600057 5/8-11 female 3-1/2 - 8"STAABR 600000 1/4-20 female TAZ

Bushings, Reducer, for Flap WheelsSTAABR 600050 1" 3/8"PartNo O.D. In. I.D. In.

STAABR 600051 1" 1/2"STAABR 600052 1" 5/8"STAABR 600053 1" 3/4"

Mandrel for Plain and Slotted DiscsSTAABR 713286 DM-7 1/4" 1/4" 2"PartNo Description Shank

SizeOverall

Dia.Length

Mandrels for Buff & Blend Cross BuffsSTAABR 869201 4" BUFF 1/4" 1/4-20 FPartNo Description Shank

Dia. In.Thread Size

STAABR 700143 3" BUFF 1/4" 8-32STAABR 707605 3" BUFF 1/4" 1/4-20

Mandrels for Cartridge Rolls

STAABR 713638 CM-2B 3/32 3/4 1/8 1 2-3/4

PartNo Description PilotDia. In.

PilotLength

In.ShankDia. In.

ShankLength

In.O/A

LengthIn.

STAABR 713287 CM-2C 3/32 1 1/8 1 3STAABR 717078 CM-2E 3/32 3/4 1/4 1 2-3/4

STAABR 714740 CM-2F 3/32 1 1/4 1-1/4 3

PartNo Description PilotDia. In.

PilotLength

In.ShankDia. In.

ShankLength

In.O/A

LengthIn.

STAABR 710893 CM-3 1/8 1/2 1/8 1 2-1/2STAABR 700743 CM-4 1/8 3/4 1/8 1 2-3/4STAABR 710213 CM-5 1/8 1 1/8 1 3STAABR 708897 CM-6 1/8 1-1/2 1/8 1 3-1/2STAABR 701870 CM-7 1/8 1/2 1/4 1-1/4 2-1/4STAABR 700717 CM-8 1/8 3/4 1/4 1-1/4 2-1/2STAABR 710190 CM-9 1/8 1 1/4 1-1/4 2-3/4STAABR 708875 CM-10 1/8 1-1/2 1/4 1-1/4 3-1/4STAABR 712230 CM-11 1/8 2 1/4 1-1/4 4STAABR 704491 CM-15 3/16 3/4 1/4 1-1/4 2-1/2STAABR 712689 CM-16 3/16 1 1/4 1-1/4 3STAABR 702286 CM-17 3/16 1-1/2 1/4 1-1/4 3-3/8STAABR 701656 CM-18 3/16 2 1/4 1-1/4 4STAABR 701111 CM-20 1/4 3/4 1/4 1-1/4 2-3/4STAABR 712584 CM-21 1/4 1 1/4 1-1/4 3STAABR 706874 CM-22 1/4 1-1/2 1/4 1-1/4 3-1/2STAABR 701529 CM-23 1/4 2 1/4 1-1/4 4

APPLICATIONS: •Best Disc for: Lighter duty blending, finishing and polishing, on contoured surfaces of ferrous and non-ferrous materials. RPM RATINGS: The maximum allowable RPM for PSA Discs is the same as the maximum RPM of the holder pad used to drive the discs, provided the holder pad and the disc are the same nominal diameter. FEATURES: •Special pressure-sensitive adhesive •Flexible BENEFITS: •Easy on/Easy off •Less adhesive residue •Perfect for all contoured applications STAABR 701648 1/2" 36G PSA DISCPartNo Description

STAABR 712330 1/2" 40G PSA DISCSTAABR 706431 1/2" 50G PSA DISCSTAABR 700548 1/2" 60G PSA DISCSTAABR 701868 1/2" 80G PSA DISCSTAABR 708331 1/2" 100G PSA DISCSTAABR 709607 1/2" 120G PSA DISCSTAABR 700431 1/2" 180G PSA DISCSTAABR 704306 1/2" 240G PSA DISCSTAABR 709407 1/2" 320G PSA DISCSTAABR 701719 3/4" 36G PSA DISCSTAABR 712410 3/4" 40G PSA DISCSTAABR 706503 3/4" 50G PSA DISCSTAABR 700627 3/4" 60G PSA DISCSTAABR 701935 3/4" 80G PSA DISCSTAABR 709023 3/4" 100G PSA DISCSTAABR 710322 3/4" 120G PSA DISCSTAABR 701137 3/4" 180G PSA DISCSTAABR 705003 3/4" 240G PSA DISCSTAABR 710129 3/4" 320G PSA DISCSTAABR 700916 1" 36G PSA DISCSTAABR 711580 1" 40G PSA DISCSTAABR 705718 1" 50G PSA DISCSTAABR 712909 1" 60G PSA DISCSTAABR 701122 1" 80G PSA DISCSTAABR 705215 1" 100G PSA DISCSTAABR 706487 1" 120G PSA DISCSTAABR 710336 1" 180G PSA DISCSTAABR 701149 1" 240G PSA DISCSTAABR 706294 1" 320G PSA DISCSTAABR 708727 1-1/2" 24G PSA DISC

Discs, PSAAluminum Oxide Resin Bond

Phone: 402-455-6151Toll Free: 800-488-9699

52

AbrasivesAbrasive Disc Accessories

Abrasives & Brushes

Abrasives

Aluminum Oxide Resin BondSTAABR 701687 1-1/2" 36G PSA DISCPartNo Description

STAABR 712376 1-1/2" 40G PSA DISCSTAABR 706475 1-1/2" 50G PSA DISCSTAABR 700595 1-1/2" 60G PSA DISCSTAABR 701909 1-1/2" 80G PSA DISCSTAABR 705286 1-1/2" 100G PSA DISCSTAABR 706538 1-1/2" 120G PSA DISCSTAABR 710397 1-1/2" 180G PSA DISCSTAABR 701193 1-1/2" 240G PSA DISCSTAABR 706344 1-1/2" 320G PSA DISCSTAABR 712974 2" 36G PSA DISCSTAABR 710598 2" 40G PSA DISCSTAABR 704748 2" 50G PSA DISCSTAABR 711880 2" 60G PSA DISCSTAABR 700153 2" 80G PSA DISCSTAABR 700209 2" 100G PSA DISCSTAABR 701476 2" 120G PSA DISCSTAABR 705360 2" 180G PSA DISCSTAABR 709160 2" 240G PSA DISCSTAABR 701263 2" 320G PSA DISCSTAABR 711954 3" 36G PSA DISCSTAABR 709583 3" 40G PSA DISCSTAABR 703717 3" 50G PSA DISCSTAABR 710857 3" 60G PSA DISCSTAABR 712192 3" 80G PSA DISCSTAABR 712776 3" 100G PSA DISCSTAABR 700980 3" 120G PSA DISCSTAABR 704863 3" 180G PSA DISCSTAABR 708677 3" 240G PSA DISCSTAABR 700778 3" 320G PSA DISCSTAABR 702484 4" 36G PSA DISCSTAABR 700098 4" 40G PSA DISCSTAABR 707258 4" 50G PSA DISCSTAABR 701351 4" 60G PSA DISCSTAABR 702701 4" 80G PSA DISCSTAABR 712248 4" 100G PSA DISCSTAABR 700472 4" 120G PSA DISCSTAABR 704341 4" 180G PSA DISCSTAABR 708186 4" 240G PSA DISCSTAABR 700292 4" 320G PSA DISCSTAABR 708458 5" 24G PSA DISCSTAABR 701412 5" 36G PSA DISCSTAABR 712123 5" 40G PSA DISCSTAABR 706242 5" 50G PSA DISCSTAABR 700346 5" 60G PSA DISCSTAABR 701657 5" 80G PSA DISCSTAABR 707246 5" 100G PSA DISCSTAABR 708503 5" 120G PSA DISCSTAABR 712374 5" 180G PSA DISCSTAABR 703197 5" 240G PSA DISCSTAABR 708297 5" 320G PSA DISCSTAABR 704948 6" 36G PSA DISCSTAABR 702639 6" 40G PSA DISCSTAABR 709739 6" 50G PSA DISCSTAABR 703857 6" 60G PSA DISCSTAABR 705169 6" 80G PSA DISCSTAABR 706739 6" 100G PSA DISCSTAABR 708027 6" 120G PSA DISCSTAABR 711853 6" 180G PSA DISCSTAABR 702743 6" 240G PSA DISCSTAABR 707820 6" 320G PSA DISCSTAABR 722173 8" 24G PSA DISCSTAABR 713907 8" 36G PSA DISCSTAABR 713067 8" 40G PSA DISCSTAABR 713313 8" 50G PSA DISCSTAABR 713066 8" 60G PSA DISCSTAABR 713062 8" 80G PSA DISCSTAABR 713511 8" 100G PSA DISCSTAABR 713063 8" 120G PSA DISCSTAABR 714863 8" 180G PSA DISCSTAABR 716087 8" 240G PSA DISCSTAABR 714692 8" 320G PSA DISC

STAABR 707096 3/8" X 1" X 1/8" 60G CARTRIDGE ROLLPartNo Description

STAABR 708357 3/8" X 1" X 1/8" 80G CARTRIDGE ROLLSTAABR 702229 3/8" X 1" X 1/8" 120G CARTRIDGE ROLLSTAABR 706036 3/8" X 1" X 1/8" 180G CARTRIDGE ROLLSTAABR 704214 3/8" X 1-1/2" X 1/8" 60G CARTRIDGE ROLLSTAABR 705509 3/8" X 1-1/2" X 1/8" 80G CARTRIDGE ROLLSTAABR 706968 3/8" X 1-1/2" X 1/8" 120G CARTRIDGE ROLLSTAABR 701277 1/2" X 1-1/2" X 1/8" 180G CARTRIDGE ROLLSTAABR 709653 1/2" X 1-1/2" X 1/8" 60G CARTRIDGE ROLLSTAABR 710928 1/2" X 1-1/2" X 1/8" 80G CARTRIDGE ROLLSTAABR 712731 1/2" X 1-1/2" X 1/8" 100G CARTRIDGE ROLLSTAABR 700939 1/2" X 1-1/2" X 1/8" 120G CARTRIDGE ROLLSTAABR 704817 1/2" X 1-1/2" X 1/8" 180G CARTRIDGE ROLLSTAABR 700667 1/2" X 2" X 1/8" 60G CARTRIDGE ROLLSTAABR 701974 1/2" X 2" X 1/8" 80G CARTRIDGE ROLLSTAABR 702233 1/2" X 2" X 1/8" 120G CARTRIDGE ROLLSTAABR 711224 5/8" X 1" X 3/16" 80G CARTRIDGE ROLLSTAABR 706950 5/8" X 2" X 1/4" 100G CARTRIDGE ROLLSTAABR 708572 3/4" X 1-1/2" X 3/16" 50G CARTRIDGE ROLLSTAABR 702768 3/4" X 1-1/2" X 3/16" 60G CARTRIDGE ROLLSTAABR 703989 3/4" X 1-1/2" X 3/16" 80G CARTRIDGE ROLLSTAABR 706105 3/4" X 2" X 3/16" 60G CARTRIDGE ROLLSTAABR 707036 1" X 2" X 1/4" 36G CARTRIDGE ROLLSTAABR 701362 1" X 2" X 1/4" 80G CARTRIDGE ROLLSTAABR 705527 1/2" X 1-1/2" X 1/8" 60G CARTRIDGE ROLLSTAABR 706805 1/2" X 1-1/2" X 1/8" 80G CARTRIDGE ROLL

APPLICATIONS: •Best Flap Wheel for: Applications requiring high stock removal. Provides maximum stability and smaller contact areas on work surface. Highest initial cut rate. •Blending, finishing and cleaning on inside and outside diameters of ferrous and non-ferrous materials. •Deburring Stainless Steel dies. •Removing flash and parting line. FEATURES: More flaps per wheel BENEFITS: •Longer lasting •Fast cutting •Increased productivity ADAPTERS: 1/4" shank adapters are available for 3-1/2" to 8" Flap Wheels. Also available are several sizes of female threaded, spindle-mounting adapters. REDUCER BUSHINGS: Available in 1" O.D. x 3/8" I.D., 1/2" I.D., 5/8" I.D., 3/4" I.D. STAABR 635405 3-1/2"X1"X5/8" 60G FLAP WHEELPartNo Description

STAABR 635406 3-1/2"X1"X5/8" 80G FLAP WHEELSTAABR 635408 3-1/2"X1"X5/8" 120G FLAP WHEELSTAABR 635505 3-1/2"X1-1/2"X5/8" 60G FLAP WHEELSTAABR 635506 3-1/2"X1-1/2"X5/8" 80G FLAP WHEEL

Wheels, FlapAluminum Oxide Resin Bond

Phone: 402-455-6151Toll Free: 800-488-9699

53

Discs, PSA

Rolls, Cartridge Aluminum Oxide Resin Bond

Abras

ives &

Brus

hes

Wheels, FlapAluminum Oxide Resin Bond

STAABR 635508 3-1/2"X1-1/2"X5/8" 120G FLAP WHEELPartNo Description

STAABR 640405 4" X 1" X 5/8" 60G FLAP WHEELSTAABR 640406 4" X 1" X 5/8" 80G FLAP WHEELSTAABR 640408 4" X 1" X 5/8" 120G FLAP WHEELSTAABR 640605 4" X 2" X 5/8" 60G FLAP WHEELSTAABR 640606 4" X 2" X 5/8" 80G FLAP WHEELSTAABR 661403 6" X 1" X 1" 40G FLAP WHEELSTAABR 661404 6" X 1" X 1" 50G FLAP WHEELSTAABR 661405 6" X 1" X 1" 60G FLAP WHEELSTAABR 661406 6" X 1" X 1" 80G FLAP WHEELSTAABR 661407 6" X 1" X 1" 100G FLAP WHEELSTAABR 661408 6" X 1" X 1" 120G FLAP WHEELSTAABR 661409 6" X 1" X 1" 150G FLAP WHEELSTAABR 661410 6" X 1" X 1" 180G FLAP WHEELSTAABR 661412 6" X 1" X 1" 320G FLAP WHEELSTAABR 661503 6" X 1-1/2" X 1" 40G FLAP WHEELSTAABR 661504 6" X 1-1/2" X 1" 50G FLAP WHEELSTAABR 661505 6" X 1-1/2" X 1" 60G FLAP WHEELSTAABR 661506 6" X 1-1/2" X 1" 80G FLAP WHEELSTAABR 661507 6" X 1-1/2" X 1" 100G FLAP WHEELSTAABR 661508 6" X 1-1/2" X 1" 120G FLAP WHEELSTAABR 661510 6" X 1-1/2" X 1" 180G FLAP WHEELSTAABR 661603 6" X 2" X 1" 40G FLAP WHEELSTAABR 661604 6" X 2" X 1" 50G FLAP WHEELSTAABR 661605 6" X 2" X 1" 60G FLAP WHEELSTAABR 661606 6" X 2" X 1" 80G FLAP WHEELSTAABR 661607 6" X 2" X 1" 100G FLAP WHEELSTAABR 661608 6" X 2" X 1" 120G FLAP WHEELSTAABR 661610 6" X 2" X 1" 180G FLAP WHEELSTAABR 681405 8" X 1" X 1" 60G FLAP WHEELSTAABR 681406 8" X 1" X 1" 80G FLAP WHEELSTAABR 681408 8" X 1" X 1" 120G FLAP WHEELSTAABR 681605 8" X 2" X 1" 60G FLAP WHEELSTAABR 681606 8" X 2" X 1" 80G FLAP WHEELSTAABR 681608 8" X 2" X 1" 120G FLAP WHEEL

Discs, FE SocAttSTAABR 840031 3/4" SOCATT DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840032 3/4" SOCATT DISC Medium 12,000-20,000STAABR 840033 3/4" SOCATT DISC Very Fine 12,000-20,000STAABR 840131 1" SOCATT DISC Coarse 12,000-20,000STAABR 840132 1" SOCATT DISC Medium 12,000-20,000STAABR 840133 1" SOCATT DISC Very Fine 12,000-20,000STAABR 840331 2" SOCATT DISC Coarse 12,000-20,000STAABR 840332 2" SOCATT DISC Medium 12,000-20,000STAABR 840333 2" SOCATT DISC Very Fine 12,000-20,000STAABR 840431 3" SOCATT DISC Coarse 10,000-18,000STAABR 840432 3" SOCATT DISC Medium 10,000-18,000STAABR 840433 3" SOCATT DISC Very Fine 10,000-18,000STAABR 840531 4" SOCATT DISC Coarse 8,000-12,000STAABR 840532 4" SOCATT DISC Medium 8,000-12,000STAABR 840533 4" SOCATT DISC Very Fine 8,000-12,000

Discs, GP SocAttSTAABR 840037 3/4" SOCATT DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840038 3/4" SOCATT DISC Medium 12,000-20,000STAABR 840039 3/4" SOCATT DISC Very Fine 12,000-20,000STAABR 840137 1" SOCATT DISC Coarse 12,000-20,000STAABR 840138 1" SOCATT DISC Medium 12,000-20,000STAABR 840139 1" SOCATT DISC Very Fine 12,000-20,000STAABR 840237 1-1/2" SOCATT DISC Coarse 12,000-20,000STAABR 840238 1-1/2" SOCATT DISC Medium 12,000-20,000STAABR 840239 1-1/2" SOCATT DISC Very Fine 12,000-20,000STAABR 840337 2" SOCATT DISC Coarse 12,000-20,000STAABR 840338 2" SOCATT DISC Medium 12,000-20,000

STAABR 840339 2" SOCATT DISC Very Fine 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840437 3" SOCATT DISC Coarse 10,000-18,000STAABR 840438 3" SOCATT DISC Medium 10,000-18,000STAABR 840439 3" SOCATT DISC Very Fine 10,000-18,000STAABR 840537 4" SOCATT DISC Coarse 8,000-12,000STAABR 840538 4" SOCATT DISC Medium 8,000-12,000STAABR 840539 4" SOCATT DISC Very Fine 8,000-12,000

FE Disc STAABR 843731 5" DISC Coarse 3000-6,000PartNo Description Grade Max. RPM

STAABR 843732 5" DISC Medium 3,000-6,000STAABR 843734 5" DISC Very Fine 3,000-6,000STAABR 843931 7" DISC Coarse 5,000-7,000STAABR 843932 7" DISC Medium 5,000-7,000STAABR 843934 7" DISC Very Fine 5,000-7,000

GP Disc STAABR 843737 5" DISC Coarse 3000-6,000PartNo Description Grade Max. RPM


Rapid Cut STAABR 843733 5" DISC Coarse 3000-6,000PartNo Description Grade Max. RPM


STAABR 840181 1" LOCKIT DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840182 1" LOCKIT DISC Medium 12,000-20,000STAABR 840183 1" LOCKIT DISC Very Fine 12,000-20,000STAABR 840231 1-1/2" LOCKIT DISC Coarse 12,000-20,000STAABR 840232 1-1/2" LOCKIT DISC Medium 12,000-20,000STAABR 840233 1-1/2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840381 2" LOCKIT DISC Coarse 12,000-20,000STAABR 840382 2" LOCKIT DISC Medium 12,000-20,000STAABR 840383 2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840481 3" LOCKIT DISC Coarse 10,000-18,000STAABR 840482 3" LOCKIT DISC Medium 10,000-18,000STAABR 840483 3" LOCKIT DISC Very Fine 10,000-18,000STAABR 840581 4" LOCKIT DISC Coarse 8,000-12,000STAABR 840582 4" LOCKIT DISC Medium 8,000-12,000STAABR 840583 4" LOCKIT DISC Very Fine 8,000-12,000

STAABR 840187 1" LOCKIT DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840188 1" LOCKIT DISC Medium 12,000-20,000STAABR 840189 1" LOCKIT DISC Very Fine 12,000-20,000STAABR 840287 1-1/2" LOCKIT DISC Coarse 12,000-20,000STAABR 840288 1-1/2" LOCKIT DISC Medium 12,000-20,000STAABR 840289 1-1/2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840387 2" LOCKIT DISC Coarse 12,000-20,000STAABR 840388 2" LOCKIT DISC Medium 12,000-20,000STAABR 840389 2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840487 3" LOCKIT DISC Coarse 10,000-18,000STAABR 840488 3" LOCKIT DISC Medium 10,000-18,000STAABR 840489 3" LOCKIT DISC Very Fine 10,000-18,000STAABR 840587 4" LOCKIT DISC Coarse 8,000-12,000STAABR 840588 4" LOCKIT DISC Medium 8,000-12,000STAABR 840589 4" LOCKIT DISC Very Fine 8,000-12,000

Discs, FE Lockit

Discs, GP Lockit

Phone: 402-455-6151Toll Free: 800-488-9699

54

Abrasives

Discs, Surface Conditioning, (A/O)

Discs, with 5/8-11 Threaded Hub-FE

Discs, with 5/8-11 Threaded Hub-GP

Discs, with 5/8-11 Threaded Hub-Rapid Cut

Abrasives & Brushes

Abrasives

Discs, FE ClickOn

STAABR 840241 1-1/2" CLICKON DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840242 1-1/2" CLICKON DISC Medium 12,000-20,000STAABR 840243 1-1/2" CLICKON DISC Very Fine 12,000-20,000STAABR 840341 2" CLICKON DISC Coarse 12,000-20,000STAABR 840342 2" CLICKON DISC Medium 12,000-20,000STAABR 840343 2" CLICKON DISC Very Fine 12,000-20,000STAABR 840441 3" CLICKON DISC Coarse 10,000-18,000STAABR 840442 3" CLICKON DISC Medium 10,000-18,000STAABR 840443 3" CLICKON DISC Very Fine 10,000-18,000

Discs, GP ClickOnSTAABR 840247 1-1/2" CLICKON DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840248 1-1/2" CLICKON DISC Medium 12,000-20,000STAABR 840249 1-1/2" CLICKON DISC Very Fine 12,000-20,000STAABR 840347 2" CLICKON DISC Coarse 12,000-20,000STAABR 840348 2" CLICKON DISC Medium 12,000-20,000STAABR 840349 2" CLICKON DISC Very Fine 12,000-20,000STAABR 840447 3" CLICKON DISC Coarse 10,000-18,000STAABR 840448 3" CLICKON DISC Medium 10,000-18,000STAABR 840449 3" CLICKON DISC Very Fine 10,000-18,000

Discs, Rapid CutSTAABR 840034 3/4" SOCATT DISC Coarse 12,000-20,000PartNo Description Grade Max. RPM

STAABR 840035 3/4" SOCATT DISC Medium 12,000-20,000STAABR 840036 3/4" SOCATT DISC Very Fine 12,000-20,000STAABR 840134 1" SOCATT DISC Coarse 12,000-20,000STAABR 840135 1" SOCATT DISC Medium 12,000-20,000STAABR 840136 1" SOCATT DISC Very Fine 12,000-20,000STAABR 840234 1-1/2" SOCATT DISC Coarse 12,000-20,000STAABR 840235 1-1/2" SOCATT DISC Medium 12,000-20,000STAABR 840236 1-1/2" SOCATT DISC Very Fine 12,000-20,000STAABR 840334 2" SOCATT DISC Coarse 12,000-20,000STAABR 840335 2" SOCATT DISC Medium 12,000-20,000STAABR 840336 2" SOCATT DISC Very Fine 12,000-20,000STAABR 840434 3" SOCATT DISC Coarse 10,000-18,000STAABR 840435 3" SOCATT DISC Medium 10,000-18,000STAABR 840436 3" SOCATT DISC Very Fine 10,000-18,000STAABR 840534 4" SOCATT DISC Coarse 8,000-12,000STAABR 840535 4" SOCATT DISC Medium 8,000-12,000STAABR 840536 4" SOCATT DISC Very Fine 8,000-12,000STAABR 840184 1" LOCKIT DISC Coarse 12,000-20,000STAABR 840185 1" LOCKIT DISC Medium 12,000-20,000STAABR 840186 1" LOCKIT DISC Very Fine 12,000-20,000STAABR 840284 1-1/2" LOCKIT DISC Coarse 12,000-20,000STAABR 840285 1-1/2" LOCKIT DISC Medium 12,000-20,000STAABR 840286 1-1/2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840384 2" LOCKIT DISC Coarse 12,000-20,000STAABR 840385 2" LOCKIT DISC Medium 12,000-20,000STAABR 840386 2" LOCKIT DISC Very Fine 12,000-20,000STAABR 840484 3" LOCKIT DISC Coarse 10,000-18,000STAABR 840485 3" LOCKIT DISC Medium 10,000-18,000STAABR 840486 3" LOCKIT DISC Very Fine 10,000-18,000STAABR 840584 4" LOCKIT DISC Coarse 8,000-12,000STAABR 840585 4" LOCKIT DISC Medium 8,000-12,000STAABR 840586 4" LOCKIT DISC Very Fine 8,000-12,000STAABR 840244 1-1/2" CLICKON DISC Coarse 12,000-20,000STAABR 840245 1-1/2" CLICKON DISC Medium 12,000-20,000STAABR 840246 1-1/2" CLICKON DISC Very Fine 12,000-20,000STAABR 840344 2" CLICKON DISC Coarse 12,000-20,000STAABR 840345 2" CLICKON DISC Medium 12,000-20,000STAABR 840346 2" CLICKON DISC Very Fine 12,000-20,000STAABR 840444 3" CLICKON DISC Coarse 10,000-18,000STAABR 840445 3" CLICKON DISC Medium 10,000-18,000STAABR 840446 3" CLICKON DISC Very Fine 10,000-18,000

APPLICATIONS: •Easy blending of irregular shapes, corners and inside radii. •Blending mill and tool marks on machined aluminum. •Removing micro-burrs caused by coated abrasives. •Reducing surface roughness for pain preparation. FEATURES: •Pre-formed, 90° shape •Flexible construction •Quick Change fastening system •Surface Conditioning material BENEFITS: •Prevents damaging, gouging or changing the work surface •Reaches into corners and radii of intricate shapes •Eliminates added finishing steps and the need to use hand and non-rotating products •Provides a consistent finish on both flat and irregular surfaces •Discs stay securely fixed to holder pad •May go from conventional coated abrasive disc grinding to surface finishing without changing holder pads •Durable •Increased stock removal •Resists loading on softer metals STAABR 840351 2" A/O SOCATT DISC Coarse 18,000PartNo Description Grade Max. RPM

STAABR 840352 2" A/O SOCATT DISC Medium 18,000STAABR 840353 2" A/O SOCATT DISC Very Fine 18,000STAABR 840451 3" A/O SOCATT DISC Coarse 12,000STAABR 840452 3" A/O SOCATT DISC Medium 12,000STAABR 840453 3" A/O SOCATT DISC Very Fine 12,000

APPLICATIONS: •Easy blending of irregular shapes, corners and inside radii. •Blending mill and tool marks on machined aluminum. •Removing micro-burrs caused by coated abrasives. •Reducing surface roughness for pain preparation. FEATURES: •Pre-formed, 90° shape •Flexible construction •Quick Change fastening system •Surface Conditioning material BENEFITS: •Prevents damaging, gouging or changing the work surface •Reaches into corners and radii of intricate shapes •Eliminates added finishing steps and the need to use hand and non-rotating products •Provides a consistent finish on both flat and irregular surfaces •Discs stay securely fixed to holder pad •May go from conventional coated abrasive disc grinding to surface finishing without changing holder pads •Durable •Increased stock removal •Resists loading on softer metals STAABR 840371 2" A/O LOCKIT DISC Coarse 18,000PartNo Description Grade Max. RPM

STAABR 840372 2" A/O LOCKIT DISC Medium 18,000STAABR 840373 2" A/O LOCKIT DISC Very Fine 18,000STAABR 840471 3" A/O LOCKIT DISC Coarse 12,000STAABR 840472 3" A/O LOCKIT DISC Medium 12,000STAABR 840473 3" A/O LOCKIT DISC Very Fine 12,000

Discs, Surface Conditioning EDGEPRO

Phone: 402-455-6151Toll Free: 800-488-9699

55

Discs, Surface Conditioning, (A/O)

SocAtt Style – Rapid Cut

Lockit Style – Rapid Cut

Abras

ives &

Brus

hes

Abrasives

APPLICATIONS: •Best Disc for: Deburring, edge breaking, blending, cleaning, finishing, and polishing after traditional grinding is done with a Resin Fibre or Flap Disc on Aluminum, Steel. and Titanium Inconel. FEATURES: •Overlapping surface conditioning fibre flaps •Mounted on a firm phenolic plate •Type 27 shape •Rapid Cut Surface Conditioning Material BENEFITS: •Provides several layers of abrasives •Durable •Cushioned effect for blending •6° taper provides increased stock removal •Very flexible •Increased stock removal •Resists "loading" on "softer" metals •Longer life STAABR 821110 4-1/2" X 7/8" FLAP DISC Coarse 10,000PartNo Description Grade Max. RPM

STAABR 821210 4-1/2" X 7/8" FLAP DISC Medium 10,000STAABR 821310 4-1/2" X 7/8" FLAP DISC Very Fine 10,000STAABR 821150 4-1/2" X 5/8-11" FLAP DISC Coarse 10,000STAABR 821250 4-1/2" X 5/8-11" FLAP DISC Medium 10,000STAABR 821350 4-1/2" X 5/8-11" FLAP DISC Very Fine 10,000

Belts, Surfaced Conditioning

STAABR 885095 1/2" X 18"BELT Very FinePartNo Description Grit

STAABR 885096 1/2" X 18"BELT MediumSTAABR 885097 1/2" X 18"BELT CoarseSTAABR 885100 1/2" X 24"BELT Very FineSTAABR 885101 1/2" X 24"BELT MediumSTAABR 885102 1/2" X 24"BELT CoarseSTAABR 885090 1/2" X 18"BELT Very FineSTAABR 885091 1/2" X 18"BELT MediumSTAABR 885092 1/2" X 18"BELT CoarseSTAABR 885105 1/2" X 20-1/2"BELT Very FineSTAABR 885106 1/2" X 20-1/2"BELT MediumSTAABR 885107 1/2" X 20-1/2"BELT Coarse

STAABR 888048 1/2" X 18"BELT Very FinePartNo Description Grit

STAABR 888049 1/2" X 18" BELT MediumSTAABR 888050 1/2" X 18"BELT CoarseSTAABR 888051 1/2" X 24"BELT Very FineSTAABR 888052 1/2" X 24"BELT MediumSTAABR 888053 1/2" X 24"BELT CoarseSTAABR 888054 1/2" X 18"BELT Very FineSTAABR 888055 1/2" X 18"BELT MediumSTAABR 888056 1/2" X 18"BELT CoarseSTAABR 888057 1/2" X 20-1/2"BELT Very FineSTAABR 888058 1/2" X 20-1/2"BELT MediumSTAABR 888059 1/2" X 20-1/2"BELT Coarse

STAABR 885001 1" X 42" Very FinePartNo Description Grit

STAABR 885002 1" X 42" MediumSTAABR 885003 1" X 42" CoarseSTAABR 885005 2" X 48" Very FineSTAABR 885006 2" X 48" MediumSTAABR 885007 2" X 48" CoarseSTAABR 885010 2" X 60" Very FineSTAABR 885011 2" X 60" MediumSTAABR 885012 2" X 60" CoarseSTAABR 885015 2" X 72" Very FineSTAABR 885016 2" X 72" MediumSTAABR 885017 2" X 72" CoarseSTAABR 885020 2-1/2" X 60" Very FineSTAABR 885021 2-1/2" X 60" MediumSTAABR 885022 2-1/2" X 60" CoarseSTAABR 885165 3" X 21" Very FineSTAABR 885166 3" X 21" MediumSTAABR 885167 3" X 21" CoarseSTAABR 885025 3" X 24" Very FineSTAABR 885026 3" X 24" MediumSTAABR 885027 3" X 24" CoarseSTAABR 885035 4" X 24" Very FineSTAABR 885036 4" X 24" MediumSTAABR 885037 4" X 24" CoarseSTAABR 885060 6" X 48" Very FineSTAABR 885061 6" X 48" MediumSTAABR 885062 6" X 48" Coarse

STAABR 888009 1" X 42" Very FinePartNo Description Grit

STAABR 888010 1" X 42" MediumSTAABR 888011 1" X 42" CoarseSTAABR 888012 2" X 48" Very FineSTAABR 888013 2" X 48" MediumSTAABR 888014 2" X 48" CoarseSTAABR 888015 2" X 60" Very FineSTAABR 888016 2" X 60" MediumSTAABR 888017 2" X 60" CoarseSTAABR 888018 2" X 72" Very FineSTAABR 888019 2" X 72" MediumSTAABR 888020 2" X 72" CoarseSTAABR 888021 2-1/2" X 60" Very FineSTAABR 888022 2-1/2" X 60" MediumSTAABR 888023 2-1/2" X 60" CoarseSTAABR 888033 3" X 21" Very FineSTAABR 888034 3" X 21" MediumSTAABR 888035 3" X 21" CoarseSTAABR 888024 3" X 24" Very FineSTAABR 888025 3" X 24" MediumSTAABR 888026 3" X 24" CoarseSTAABR 888027 4" X 24" Very FineSTAABR 888028 4" X 24" MediumSTAABR 888029 4" X 24" CoarseSTAABR 888030 6" X 48" Very FineSTAABR 888031 6" X 48" MediumSTAABR 888032 6" X 48" Coarse

Phone: 402-455-6151Toll Free: 800-488-9699

56

Call John Day Company at 800-488-9699 for your

Tool Crib Management and Vending Solutions

Discs, Surface Conditioning Flap (A/O)

Portable Sanders – FE

Portable Sanders – Rapid Cut

Floor Mounted/Platen Sanders – FE

Floor Mounted/Platen Sanders – Rapid Cut

Abrasives & Brushes

Abrasives

STAABR 840012 3/4" SOCATT DISC MediumPartNo Description Grade

STAABR 840013 3/4" SOCATT DISC FineSTAABR 840015 3/4" SOCATT DISC Very FineSTAABR 840112 1" SOCATT DISC MediumSTAABR 840113 1" SOCATT DISC FineSTAABR 840115 1" SOCATT DISC Very FineSTAABR 840212 1-1/2" SOCATT DISC MediumSTAABR 840213 1-1/2" SOCATT DISC FineSTAABR 840215 1-1/2" SOCATT DISC Very FineSTAABR 840312 2" SOCATT DISC MediumSTAABR 840313 2" SOCATT DISC FineSTAABR 840315 2" SOCATT DISC Very FineSTAABR 840412 3" SOCATT DISC MediumSTAABR 840413 3" SOCATT DISC FineSTAABR 840415 3" SOCATT DISC Very Fine

Discs, Quick Change Lockit Aluminum OxideSTAABR 810212 1/2" LOCKIT DISC MediumPartNo Description Grade

STAABR 810213 1/2" LOCKIT DISC FineSTAABR 810215 1/2" LOCKIT DISC Very FineSTAABR 810312 2" LOCKIT DISC MediumSTAABR 810313 2" LOCKIT DISC FineSTAABR 810315 2" LOCKIT DISC Very FineSTAABR 810412 3" LOCKIT DISC MediumSTAABR 810413 3" LOCKIT DISC FineSTAABR 810415 3" LOCKIT DISC

STAABR 849128 12" X 1-1/4" CENTER HOLE DISC

STAABR 840610 5" X 1/2" CENTER HOLE DISC MediumPartNo Description Grade

STAABR 840609 5" X 1/2" CENTER HOLE DISC FineSTAABR 840608 5" X 1/2" CENTER HOLE DISC Very FineSTAABR 840710 6" X 1/2" CENTER HOLE DISC MediumSTAABR 840709 6" X 1/2" CENTER HOLE DISC FineSTAABR 840708 6" X 1/2" CENTER HOLE DISC Very FineSTAABR 840810 7" X 1/2" CENTER HOLE DISC MediumSTAABR 840809 7" X 1/2" CENTER HOLE DISC FineSTAABR 840808 7" X 1/2" CENTER HOLE DISC Very FineSTAABR 840910 8" X 1/2" CENTER HOLE DISC MediumSTAABR 840909 8" X 1/2" CENTER HOLE DISC FineSTAABR 840908 8" X 1/2" CENTER HOLE DISC Very FineSTAABR 840110 10" X 1/2" CENTER HOLE DISC MediumSTAABR 840109 10" X 1/2" CENTER HOLE DISC FineSTAABR 840108 10" X 1/2" CENTER HOLE DISC Very FineSTAABR 849130 12" X 1-1/4" CENTER HOLE DISC MediumSTAABR 849129 12" X 1-1/4" CENTER HOLE DISC Fine

APPLICATIONS: CLEANING •Removing surface oxidation. •Surface preparation prior to coating. •Removing surface coatings for part inspection. •Removing rust. •Removing corrosion on Steel Rule and Kirksite dies.

POLISHING •Polishing round and square tubing. •Polishing valve spools. •Mold and die polishing. •Polishing inside diameters of lifter bores, valve bodies and brake cylinders.

FEATURES: •Durable construction •Tough, reinforced nylon fibers with abrasive grain •Unique design

BENEFITS: •Withstands heavy edge work while blending and polishing •Long life •Resists loading •Extended duration of cut •Extended rate of cut •Cool running •Eliminates edge fraying and grain shedding •Conforms to I.D.s •Eliminates changing critical tolerances •Quick change

STAABR 725007 1" HP BUFF & BLEND CROSS BUFF 2 8-32 Medium A/OPartNo Description Ply Eyelet Grade Grain

STAABR 725008 1" HP BUFF & BLEND CROSS BUFF 2 8-32 Very Fine A/OSTAABR 725000 1-1/2" HP BUFF & BLEND CROSS

BUFF2 8-32 Very Fine S/O

STAABR 725012 1-1/2" HP BUFF & BLEND CROSSBUFF

2 8-32 Medium A/OSTAABR 725013 1-1/2" HP BUFF & BLEND CROSS

BUFF2 8-32 Very Fine A/O

STAABR 725005 1-1/2" HP BUFF & BLEND CROSSBUFF

3 8-32 Medium A/OSTAABR 725006 1-1/2" HP BUFF & BLEND CROSS

BUFF3 8-32 Very Fine A/O

HP Buff & Blend Cross Buffs

Phone: 402-455-6151Toll Free: 800-488-9699

57

Very Fine

Discs, Buff & Blend (Aluminum Oxide) SocAtt

Discs, Buff & Blend (Aluminum Oxide)

With Center Hole

Very Fine

Abras

ives &

Brus

hes

Abrasives

APPLICATIONS: DEBURRING •Removing medium to heavy burrs. •Deburring of Aluminum die cast flashing. •Removing parting lines from castings and forgings. •Smoothing radius on stamped metal parts. •Deburring Stainless Steel pipe threads. •Deburring punched holes on machined parts.

POLISHING •Polishing welds. •Blending and polishing handling marks. •Polishing small, casted parts prior to coating.

FEATURES: •Dense, non-woven construction •Smooth running •Non-metallic •Smear-resistant formula •Conforms to work piece •Provides best durability, stock removal and finest finish

BENEFITS: •Long lasting •High edge durability •Non-dusting •Less operator fatigue •No contamination of work piece •Possibility of smearing is greatly reduced •Prevents undercutting and gouging the work piece •Increase productivity •Two steps in one

STAABR 853092 6" X 1/2" X 1" DEBURRING WHEEL 8SM Medium S/C MediumPartNo Description Spec. Density Grain Grade

STAABR 853093 6" X 1/2" X 1" DEBURRING WHEEL 8SF Medium S/C FineSTAABR 854093 6" X 1/2" X 1" DEBURRING WHEEL 9SF Hard S/C FineSTAABR 855093 6" X 1/2" X 1" DEBURRING WHEEL 10SF Hard S/C FineSTAABR 853182 6" X 1" X 1" DEBURRING WHEEL 8AM Medium A/C MediumSTAABR 853192 6" X 1" X 1" DEBURRING WHEEL 8SM Medium S/C MediumSTAABR 853193 6" X 1" X 1" DEBURRING WHEEL 8SF Medium S/C FineSTAABR 854192 6" X 1" X 1" DEBURRING WHEEL 9SM Hard S/C MediumSTAABR 854193 6" X 1" X 1" DEBURRING WHEEL 9SF Hard S/C FineSTAABR 855193 6" X 1" X 1" DEBURRING WHEEL 10SF Hard S/C FineSTAABR 854293 6" X 2" X 1" DEBURRING WHEEL 9SF Hard S/C FineSTAABR 855293 6" X 2" X 1" DEBURRING WHEEL 10SF Hard S/C FineSTAABR 853793 6" X 1/2" X 3" DEBURRING WHEEL 8SF Medium S/C FineSTAABR 854793 6" X 1/2" X 3" DEBURRING WHEEL 9SF Hard S/C Fine

APPLICATIONS: •Deburring. •Polishing. •Cleaning. •Finishing. •Surface preparation. •Hand applications on metals, composite or plastic surfaces. FEATURES: •Pre-cut 6" x 9" size. •Flexible. •Washable. •Uniform distribution of grain. •Various grades. BENEFITS •No cutting of rolls; economical size •Conforms to work piece; will not alter shape •Reusable; rust proof •Consistent finish •Adaptability to specific jobs •Can replace steel wool, files, scrapers, wire brushes, and sandpaper sheets. STAABR 827510 HEAVY DUTY HAND PAD A/O TanPartNo Description Grain Color

STAABR 827505 GENERAL PURPOSE HAND PAD A/O MaroonSTAABR 827500 ULTRA FINE HAND PAD S/C GraySTAABR 827525 CLEANING HAND PAD N/A White

FEATURES: •Tough, P-graded, heat-treated aluminum oxide abrasive. •Full resin bond system •Flexible, X-weight polyester/cotton backing. •Butt tape joint. BENEFITS: •Aggressive yet cool cutting. •Excellent edge adhesion. •Tear and fray resistant. •Reversible, durable Designed for all metalworking, finishing and contour and shape sanding applications requiring flexibility and fray resistance. CARBO 05539562863 1/4" X 24" XB 0967 BELT P60PartNo Description Grading

CARBO 05539562864 1/4" X 24" XB 0967 BELT P80CARBO 05539562866 3/8" X 13" XB 0967 BELT P60CARBO 05539562867 3/8" X 13" XB 0967 BELT P80CARBO 05539562869 1/2" X 12" XB 0967 BELT P60CARBO 05539562870 1/2" X 12" XB 0967 BELT P80CARBO 05539562872 1/2" X 12" XB 0967 BELT P120CARBO 05539562873 1/2" X 18" XB 0967 BELT P60CARBO 05539562874 1/2" X 18" XB 0967 BELT P80CARBO 05539562877 1/2" X 24" XB 0967 BELT P40CARBO 05539562879 1/2" X 24" XB 0967 BELT P60CARBO 05539562880 1/2" X 24" XB 0967 BELT P80

Pads, Hand

BeltsBelts, Portable FileAluminum Oxide Resin Cloth

Phone: 402-455-6151Toll Free: 800-488-9699

58

Wheels, Convolute

Abrasives & Brushes

AbrasivesBeltsBelts, Portable FileAluminum Oxide Resin ClothCARBO 05539562881 1/2" X 24" XB 0967 BELT P100PartNo Description Grading

CARBO 05539562882 1/2" X 24" XB 0967 BELT P120CARBO 05539562883 3/4" X 18" XB 0967 BELT P40CARBO 05539562885 3/4" X 18" XB 0967 BELT P60CARBO 05539562886 3/4" X 18" XB 0967 BELT P80CARBO 05539562887 1/4" X 24" XB 0967 BELT P120CARBO 05539562888 3/4" X 20-1/2" XB 0967 BELT P40CARBO 05539562890 3/4" X 20-1/2" XB 0967 BELT P60CARBO 05539562891 3/4" X 20-1/2" XB 0967 BELT P80CARBO 05539562893 3/4" X 20-1/2" XB 0967 BELT P120CARBO 05539562894 1" X 30" XB 0967 BELT P60CARBO 05539562895 1" X 30" XB 0967 BELT P80CARBO 05539562896 1" X 30" XB 0967 BELT P120

Belts, Portable

FEATURES: •Zirconia alumina abrasive. •Y-weight cotton backing. •Open coat. •Butt tape joint. •Packaged in convenient, durable contractor packs.

BENEFITS: •Aggressive, rapid cut rate. •Extended life. •Reduced loading. •Reversible, excellent durability. •Job specific labeling; easy product indentification •Ideal for walk-in trade, showroom displays Excellent for finishing wood and non-metallic materials.

CARBO 05539563668 3" X 21" YC 1186 O BELT 36PartNo Description Grading

CARBO 05539563667 3" X 21" YC 1186 O BELT 50CARBO 05539563666 3" X 21" YC 1186 O BELT 80CARBO 05539563665 3" X 21" YC 1186 O BELT 120CARBO 05539563672 3" X 24" YC 1186 O BELT 36CARBO 05539563671 3" X 24" YC 1186 O BELT 50CARBO 05539563670 3" X 24" YC 1186 O BELT 80CARBO 05539563669 3" X 24" YC 1186 O BELT 120CARBO 05539563676 4" X 24" YC 1186 O BELT 36CARBO 05539563675 4" X 24" YC 1186 O BELT 50CARBO 05539563674 4" X 24" YC 1186 O BELT 80CARBO 05539563673 4" X 24" YC 1186 O BELT 120

FEATURES: •Aluminum oxide abrasive. •Full resin bond system. •X-weight cotton backing. •Butt tape joint. BENEFITS: •Tough and durable with aggressive cutting action. •Increased strength. •Cool operating on platen sanders. •Reversible, excellent durability Ideal for sanding metal and all species of wood.

CARBO 05539510759 3" X 21" XC 0877 BELT 40PartNo Description Grading

CARBO 05539510758 3" X 21" XC 0877 BELT 50CARBO 05539510757 3" X 21" XC 0877 BELT 60CARBO 05539510754 3" X 21" XC 0877 BELT 80CARBO 05539510753 3" X 21" XC 0877 BELT 100CARBO 05539510752 3" X 21" XC 0877 BELT 120CARBO 05539510751 3" X 21" XC 0877 BELT 150CARBO 05539510772 3" X 24" XC 0877 BELT 40CARBO 05539510769 3" X 24" XC 0877 BELT 50CARBO 05539510771 3" X 24" XC 0877 BELT 60CARBO 05539510764 3" X 24" XC 0877 BELT 80CARBO 05539510767 3" X 24" XC 0877 BELT 100CARBO 05539510766 3" X 24" XC 0877 BELT 120CARBO 05539510763 3" X 24" XC 0877 BELT 150CARBO 05539510781 4" X 24" XC 0877 BELT 40CARBO 05539510779 4" X 24" XC 0877 BELT 50CARBO 05539510778 4" X 24" XC 0877 BELT 60CARBO 05539510775 4" X 24" XC 0877 BELT 80CARBO 05539510777 4" X 24" XC 0877 BELT 100CARBO 05539510774 4" X 24" XC 0877 BELT 120CARBO 05539510773 4" X 24" XC 0877 BELT 150

FEATURES: •Zirconia alumina abrasive. •Y-weight cotton backing. •Open coat. •Butt tape joint.

BENEFITS: •Aggressive, rapid cut rate. •Extended life. •Reduced loading. •Ideal for dry grinding applications. •Reversible, excellent durability. Excellent for finishing wood and non-metallic materials.

CARBO 05539563660 2" X 48" YC 1186 O BELT 36PartNo Description Grading

CARBO 05539563659 2" X 48" YC 1186 O BELT 50CARBO 05539563658 2" X 48" YC 1186 O BELT 80CARBO 05539563664 6" X 48" YC 1186 O BELT 36CARBO 05539563663 6" X 48" YC 1186 O BELT 50CARBO 05539563662 6" X 48" YC 1186 O BELT 80

Aluminum Oxide Resin Cloth

Phone: 402-455-6151Toll Free: 800-488-9699

59

Belts, Red Zirconia Alumina Resin Cloth

Belts, Red Zirconia Alumina Resin Cloth

Abras

ives &

Brus

hes

Abrasives

Aluminum Oxide Resin ClothFEATURES: •Aluminum oxide abrasive. •Full resin bond system. •X-weight cotton backing. •Butt tape joint. BENEFITS: •Versatile. •Tough and durable with aggressive cutting action. •Increased strength. •Cool operating on platen sanders. •Reversible, durable. Ideal for operations requiring a belt specification that does not generate heat, but is capable of sanding a variety of materials. Closed coat for fast metal removal. CARBO 05539510109 1" X 42" XC 0877 BELT 40PartNo Description Grading

CARBO 05539510111 1" X 42" XC 0877 BELT 50CARBO 05539510112 1" X 42" XC 0877 BELT 60CARBO 05539510113 1" X 42" XC 0877 BELT 80CARBO 05539510114 1" X 42" XC 0877 BELT 100CARBO 05539510118 1" X 42" XC 0877 BELT 120CARBO 05539510123 2" X 48" XC 0877 BELT 36CARBO 05539510124 2" X 48" XC 0877 BELT 50CARBO 05539510127 2" X 48" XC 0877 BELT 60CARBO 05539510128 2" X 48" XC 0877 BELT 80CARBO 05539510132 2" X 48" XC 0877 BELT 100CARBO 05539510133 2" X 48" XC 0877 BELT 120CARBO 05539510153 6" X 48" XC 0877 BELT 36CARBO 05539510154 6" X 48" XC 0877 BELT 50CARBO 05539510158 6" X 48" XC 0877 BELT 60CARBO 05539510159 6" X 48" XC 0877 BELT 80CARBO 05539510160 6" X 48" XC 0877 BELT 100CARBO 05539510161 6" X 48" XC 0877 BELT 120

FEATURES: •Ceramic alumina abrasive. •Full resin bond system. •Y-weight polyester backing. •Waterproof. BENEFITS: •Exceptional life and value. •Aggressive cut. •Self-sharpening. •Increased Strength. •Durable. •Maximum grain adhesion. •Use wet or dry. Unique ceramic alumina abrasive offers sharper, cooler and most aggressive cutting with longest life. Applications include finishing exotic alloys and investment castings. CARBO 05539599706 2" X 132" YP 2586 W BELT 36PartNo Description Grading

CARBO 05539599708 2" X 132" YP 2586 W BELT 50CARBO 05539599709 2" X 132" YP 2586 W BELT 60

CARBO 05539599689 3" X 132" YP 2586 W BELT 36PartNo Description Grading

CARBO 05539599692 3" X 132" YP 2586 W BELT 60CARBO 05539599693 3" X 132" YP 2586 W BELT 80CARBO 05539599614 4" X 132" YP 2586 W BELT 36CARBO 05539599674 4" X 132" YP 2586 W BELT 50CARBO 05539599675 4" X 132" YP 2586 W BELT 60

FEATURES: •Zirconia alumina abrasive. •Full resin bond system. •Y and X-weight polyester backing. •Waterproof.

BENEFITS: •Ultra tough, aggressive. •Cool cutting, self-sharpening. •Increased strength. •Durable. •The choice for heaviest pressure applications •Maximum grain adhesion •Use wet or dry Applications include weld removal and the finishing of ferrous and non-ferrous materials.

CARBO 05539599730 2" X 72" YP 1186 W BELT 36PartNo Description Grading

CARBO 05539599732 2" X 72" YP 1186 W BELT 50CARBO 05539599733 2" X 72" YP 1186 W BELT 60CARBO 05539599734 2" X 72" YP 1186 W BELT 80CARBO 05539599735 2" X 72" YP 1186 W BELT 100CARBO 05539599736 2" X 72" YP 1186 W BELT 120CARBO 05539599696 2" X 132" YP 1186 W BELT 36CARBO 05539599698 2" X 132" YP 1186 W BELT 50CARBO 05539599699 2" X 132" YP 1186 W BELT 60CARBO 05539599679 3" X 132" YP 1186 W BELT 36CARBO 05539599683 3" X 132" YP 1186 W BELT 80CARBO 05539599664 4" X 132" YP 1186 W BELT 36CARBO 05539599666 4" X 132" YP 1186 W BELT 50CARBO 05539599667 4" X 132" YP 1186 W BELT 60CARBO 05539599668 4" X 132" YP 1186 W BELT 80

Belts, Zirconia Alumina Resin WaterproofCloth

Phone: 402-455-6151Toll Free: 800-488-9699

60

For Additional Product Information

Call Industrial Sales at 800-488-9699 or visit

www.johnday.com

Belts

Belts, Ceramic Alumina Resin Waterproof Cloth

Abrasives & Brushes

Abrasives


FEATURES: •Aluminum oxide abrasive. •Full resin bond system. •X-weight cotton backing. BENEFITS: •Versatile. •Durable, with aggressive cutting action. •The economical choice for a wide range of applications. •Increased strength. •Durability. •Resistant to heat. General purpose belt for sanding ferrous and non-ferrous materials. CARBO 05539599956 2" X 72" XC 0877 BELT 36PartNo Description Grading

CARBO 05539599954 2" X 72" XC 0877 BELT 50CARBO 05539599953 2" X 72" XC 0877 BELT 60CARBO 05539599952 2" X 72" XC 0877 BELT 80CARBO 05539599877 2" X132" XC 0877 BELT 36CARBO 05539599880 2" X132" XC 0877 BELT 60CARBO 05539599881 2" X132" XC 0877 BELT 80CARBO 05539599864 3" X132" XC 0877 BELT 36CARBO 05539599866 3" X132" XC 0877 BELT 50CARBO 05539599868 3" X132" XC 0877 BELT 80CARBO 05539599851 4" X132" XC 0877 BELT 36CARBO 05539599854 4" X132" XC 0877 BELT 60CARBO 05539599855 4" X 132" XC 0877 BELT 80CARBO 05539599856 4" X132" XC 0877 BELT 100CARBO 05539599857 4" X132" XC 0877 BELT 120CARBO 05539599858 4" X132" XC 0877 BELT 150

Aluminum Oxide Resin Cloth Open

FEATURES: •Light brown aluminum oxide abrasive. •Full resin bond system. •X-weight cotton backing. •Open coat. BENEFITS: •Uniform scratch pattern. •Increased strength. •Resists loading. Applications include finishing of wood and non-ferrous metals. CARBO 05539599963 25" X75" XC 07760 O BELT 80PartNo Description Grading

CARBO 05539599962 25" X75" XC 07760 O BELT 100CARBO 05539599961 25" X75" XC 07760 O BELT 120CARBO 05539599960 25" X75" XC 07760 O BELT 150CARBO 05539599978 25" X75" XC 07760 O BELT 60CARBO 05539599977 37" X 60" XC 07760 O BELT 80CARBO 05539599976 37" X60" XC 07760 O BELT 100

CARBO 05539599975 37" X60" XC 07760 O BELT 120PartNo Description Grading

CARBO 05539599974 37" X60" XC 07760 O BELT 150CARBO 05539599973 37" X60" XC 07760 O BELT 180CARBO 05539599992 37" X75" XC 07760 O BELT 60CARBO 05539599991 37" X75" XC 07760 O BELT 80CARBO 05539599990 37" X75" XC 07760 O BELT 100CARBO 05539599989 37" X75" XC 07760 O BELT 120CARBO 05539599988 37" X75" XC 07760 O BELT 150CARBO 05539599987 37" X75" XC 07760 O BELT 180

FEATURES: •P-grade heat-treated, aluminum oxide abrasive. •Full resin bond system. •Unique fibre-reinforced, B-weight, latex-saturated backing. •PSA (pressure sensitive adhesive) backing. •Special undyed stearate oversize. •Link disc roll, 4-pack with polybags. BENEFITS: •30% to 50% faster cut rate than other discs •Consistent scratch pattern and finish •Improved grain adhesion and longest disc life •50% - 60% improvement in tear strength, superior resistance to delamination •Flexible; can be used wet •Easy application and removal •Superior load resistance and extended life •No color transfer to work •Easy dispensing •Minimizes storage space •Reduces cardboard waste Best choice for sanding all paints, primers, plastics and fiberglass. Also suited for sealer and wash coats in wood furniture. CARBO 05539520624 3-1/2" X 0" B 0912 DO LINK DISC ROLL P80PartNo Description Grading

CARBO 05539520623 3-1/2" X 0" B 0912 DO LINK DISC ROLL P100CARBO 05539520620 3-1/2" X 0" B 0912 DO LINK DISC ROLL P180CARBO 05539520619 3-1/2" X 0" B 0912 DO LINK DISC ROLL P220CARBO 05539520617 3-1/2" X 0" B 0912 DO LINK DISC ROLL P280CARBO 05539520615 3-1/2" X 0" B 0912 DO LINK DISC ROLL P400CARBO 05539518114 5" X 0" B 0912 DO LINK DISC ROLL P80CARBO 05539518113 5" X 0" B 0912 DO LINK DISC ROLL P100CARBO 05539518112 5" X 0" B 0912 DO LINK DISC ROLL P120CARBO 05539518111 5" X 0" B 0912 DO LINK DISC ROLL P150CARBO 05539518110 5" X 0" B 0912 DO LINK DISC ROLL P180CARBO 05539518109 5" X 0" B 0912 DO LINK DISC ROLL P220CARBO 05539518108 5" X 0" B 0912 DO LINK DISC ROLL P240CARBO 05539518107 5" X 0" B 0912 DO LINK DISC ROLL P280CARBO 05539518106 5" X 0" B 0912 DO LINK DISC ROLL P320CARBO 05539518105 5" X 0" B 0912 DO LINK DISC ROLL P400CARBO 05539563779 5" X 0" B 0912 DO LINK DISC ROLL P500CARBO 05539518104 5" X 0" B 0912 DO LINK DISC ROLL P600CARBO 05539518101 5" X 0" B 0912 DO LINK DISC ROLL P800CARBO 05539520293 5" X 0" B 0912 DO INDIVIDUAL DISCS P1000CARBO 05539520292 5" X 0" B 0912 DO INDIVIDUAL DISCS P1200CARBO 05539520291 5" X 0" B 0912 DO INDIVIDUAL DISCS P1500CARBO 05539518173 6" X 0" B 0912 DO LINK DISC ROLL P80CARBO 05539518172 6" X 0" B 0912 DO LINK DISC ROLL P100CARBO 05539518171 6" X 0" B 0912 DO LINK DISC ROLL P120CARBO 05539518170 6" X 0" B 0912 DO LINK DISC ROLL P150CARBO 05539518169 6" X 0" B 0912 DO LINK DISC ROLL P180CARBO 05539518168 6" X 0" B 0912 DO LINK DISC ROLL P220CARBO 05539518167 6" X 0" B 0912 DO LINK DISC ROLL P240CARBO 05539518166 6" X 0" B 0912 DO LINK DISC ROLL P280

Discs, Stick-On

Phone: 402-455-6151Toll Free: 800-488-9699

61

Belts

Red Aluminum Oxide Dri-Lube Resin Paper Open

Abras

ives &

Brus

hes

Discs, Stick-On

CARBO 05539518165 6" X 0" B 0912 DO LINK DISC ROLL P320PartNo Description Grading

CARBO 05539518164 6" X 0" B 0912 DO LINK DISC ROLL P400CARBO 05539563780 6" X 0" B 0912 DO LINK DISC ROLL P500CARBO 05539518163 6" X 0" B 0912 DO LINK DISC ROLL P600CARBO 05539518162 6" X 0" B 0912 DO LINK DISC ROLL P800CARBO 05539520296 6" X 0" B 0912 DO INDIVIDUAL DISCS P1000CARBO 05539520295 6" X 0" B 0912 DO INDIVIDUAL DISCS P1200CARBO 05539520294 6" X 0" B 0912 DO INDIVIDUAL DISCS P1500CARBO 05539561110 6" X 0" B 0912 DO LINK DISC ROLL P80CARBO 05539561109 6" X 0" B 0912 DO LINK DISC ROLL P100CARBO 05539561108 6" X 0" B 0912 DO LINK DISC ROLL P120CARBO 05539561107 6" X 0" B 0912 DO LINK DISC ROLL P150CARBO 05539561106 6" X 0" B 0912 DO LINK DISC ROLL P180CARBO 05539561105 6" X 0" B 0912 DO LINK DISC ROLL P220CARBO 05539561102 6" X 0" B 0912 DO LINK DISC ROLL P320

Aluminum Oxide Paper OpenFEATURES: •P-grade aluminum oxide abrasive. •D-weight paper. •Open coat. BENEFITS: •Tough and durable. •Reduced loading. Sanding of light metals and wood. An economical general clean-up product. Use disc cement to apply these discs. CARBO 05539510655 5" X 0" D 0811 O INDIVIDUAL DISC P40PartNo Description Grading

CARBO 05539510653 5" X 0" D 0811 O INDIVIDUAL DISC P80CARBO 05539510661 6" X 0" D 0811 O INDIVIDUAL DISC P36CARBO 05539510660 6" X 0" D 0811 O INDIVIDUAL DISC P40CARBO 05539510659 6" X 0" D 0811 O INDIVIDUAL DISC P60CARBO 05539510657 6" X 0" D 0811 O INDIVIDUAL DISC P80CARBO 05539510666 8" X 0" D 0811 O INDIVIDUAL DISC P36CARBO 05539510665 8" X 0" D 0811 O INDIVIDUAL DISC P40CARBO 05539510664 8" X 0" D 0811 O INDIVIDUAL DISC P60CARBO 05539510663 8" X 0" D 0811 O INDIVIDUAL DISC P80

FEATURES: •P-grade light brown aluminum oxide abrasive. •Durable C-weight paper. •Special stearate oversize. BENEFITS: •Fast cut, long life. •High tear resistance. •Excellent load resistance. Ideal for sanding paints, primers, plastics and fiberglass, as well as whitewood sanding, clean-up and repair. Use disc cement to apply these discs.

CARBO 05539510643 5" X 0" C 0712 DO INDIVIDUAL DISC P80PartNo Description Grading

CARBO 05539510641 5" X 0" C 0712 DO INDIVIDUAL DISC P180CARBO 05539510640 5" X 0" C 0712 DO INDIVIDUAL DISC P220CARBO 05539510639 5" X 0" C 0712 DO INDIVIDUAL DISC P240CARBO 05539510637 5" X 0" C 0712 DO INDIVIDUAL DISC P320CARBO 05539510651 6" X 0" C 0712 DO INDIVIDUAL DISC P80CARBO 05539510650 6" X 0" C 0712 DO INDIVIDUAL DISC P100CARBO 05539510649 6" X 0" C 0712 DO INDIVIDUAL DISC P120CARBO 05539510634 6" X 0" C 0712 DO INDIVIDUAL DISC P150CARBO 05539510647 6" X 0" C 0712 DO INDIVIDUAL DISC P220CARBO 05539510646 6" X 0" C 0712 DO INDIVIDUAL DISC P240CARBO 05539510645 6" X 0" C 0712 DO INDIVIDUAL DISC P320

FEATURES: •Silicon carbide abrasive. •Heavy B-weight paper. •Stearate oversize. BENEFITS: •Sharp cut, excellent for finishing. •Tear resistant. •Improved load resistance. Sanding metal primer coats and between finish coats. Also for whitewood between wash, sealer and lacquer coats. Use disc cement to apply these discs.

CARBO 05539510621 5" X 0" B 0411 DO INDIVIDUAL DISC 120PartNo Description Grading

CARBO 05539510618 5" X 0" B 0411 DO INDIVIDUAL DISC 180CARBO 05539510484 6" X 0" B 0411 DO INDIVIDUAL DISC 150CARBO 05539510627 6" X 0" B 0411 DO INDIVIDUAL DISC 180CARBO 05539510626 6" X 0" B 0411 DO INDIVIDUAL DISC 220

FEATURES: •Ceramic alumina abrasive. •Resin bond. •Reactive filler. •Heavy fibre backing.

BENEFITS: •Sharper, cooler cutting abrasive continually exposing sharp points. •Fast cut rate with long life. •Increased strength, durability and gain adhesion. •Enhanced grinding action. •Strength and tear resistance. Excellent for all fibre disc grinding applications requiring aggressive cutting action, cool cut and long life.

CARBO 05539510719 4-1/2" X 7/8" V 2547 INDIVIDUAL DISC 36PartNo Description Grading

CARBO 05539510717 4-1/2" X 7/8" V 2547 INDIVIDUAL DISC 60CARBO 05539510716 4-1/2" X 7/8" V 2547 INDIVIDUAL DISC 80CARBO 05539510732 5" X 7/8" V 2547 INDIVIDUAL DISC 24CARBO 05539510731 5" X 7/8" V 2547 INDIVIDUAL DISC 36CARBO 05539510730 5" X 7/8" V 2547 INDIVIDUAL DISC 50CARBO 05539510728 5" X 7/8" V 2547 INDIVIDUAL DISC 60CARBO 05539510727 5" X 7/8" V 2547 INDIVIDUAL DISC 80CARBO 05539510742 7" X 7/8" V 2547 INDIVIDUAL DISC 24CARBO 05539510740 7" X 7/8" V 2547 INDIVIDUAL DISC 36CARBO 05539510738 7" X 7/8" V 2547 INDIVIDUAL DISC 50CARBO 05539510736 7" X 7/8" V 2547 INDIVIDUAL DISC 60CARBO 05539510735 7" X 7/8" V 2547 INDIVIDUAL DISC 80CARBO 05539520112 7" X 7/8" V 2547 INDIVIDUAL DISC 100CARBO 05539520113 7" X 7/8" V 2547 INDIVIDUAL DISC 120

Phone: 402-455-6151Toll Free: 800-488-9699

62

Abrasives

Red Aluminum Oxide Dri-Lube Resin Paper Open

Gold Aluminum Oxide Dri-Lube Resin Paper Open

Silicon Carbide Dri-Lube Paper Open

Discs, Resin Fibre Ceramic Alumina Resin Fibre

Abrasives & Brushes

AbrasivesDiscs, Resin FibreFEATURES: •New, premium abrasive blend: Zirconia alumina and ceramic. •Resin bond. •Reactive filler. •Heavy fibre backing. BENEFITS: •Outperforms previous disc 30-40%. •Ultra tough, aggressive yet cool cutting and self sharpening. •Increased strength, durability and grain adhesion. •Enhanced grinding action. •Strength and tear resistance. Ideal for heavy duty grinding of welds, gates, risers and parting lines on castings and carbon steels. The best choice for stainless steel. CARBO 05539520088 4-1/2" X 7/8" V 1247 INDIVIDUAL DISC 24PartNo Description Grading

CARBO 05539520086 4-1/2" X 7/8" V 1247 INDIVIDUAL DISC 50CARBO 05539520034 4-1/2" X 7/8" V 1247 INDIVIDUAL DISC 60CARBO 05539520019 4-1/2" X 7/8" V 1247 INDIVIDUAL DISC 80CARBO 05539510713 5" X 7/8" V 1247 INDIVIDUAL DISC 24CARBO 05539510712 5" X 7/8" V 1247 INDIVIDUAL DISC 36CARBO 05539510711 5" X 7/8" V 1247 INDIVIDUAL DISC 50CARBO 05539520069 5" X 7/8" V 1247 INDIVIDUAL DISC 60CARBO 05539520055 5" X 7/8" V 1247 INDIVIDUAL DISC 80CARBO 05539510722 7" X 7/8" V 1247 INDIVIDUAL DISC 24CARBO 05539510721 7" X 7/8" V 1247 INDIVIDUAL DISC 36CARBO 05539510720 7" X 7/8" V 1247 INDIVIDUAL DISC 50CARBO 05539520077 7" X 7/8" V 1247 INDIVIDUAL DISC 60CARBO 05539520087 7" X 7/8" V 1247 INDIVIDUAL DISC 80CARBO 05539513249 7" X 7/8" V 1247 FLEX-LOC INDIVIDUAL DISC 36CARBO 05539520083 9-1/8" X 7/8" V 1247 INDIVIDUAL DISC 36

Aluminum Oxide Resin FibreFEATURES: •Heat-treated aluminum oxide abrasive. •Resin bond. •Heavy fibre backing. •Reactive filler. BENEFITS: •Aggressive yet cool cutting with long life. •Increased strength, durability and grain adhesion. •Strength and tear resistance. •Enhanced grinding action. Ideal for rust, bare metal, welds and stainless steel. CARBO 05539510595 4" X 5/8" V 0947 INDIVIDUAL DISC 24PartNo Description Grading

CARBO 05539510594 4" X 5/8" V 0947 INDIVIDUAL DISC 36CARBO 05539510593 4" X 5/8" V 0947 INDIVIDUAL DISC 50CARBO 05539510592 4" X 5/8" V 0947 INDIVIDUAL DISC 60CARBO 05539510591 4" X 5/8" V 0947 INDIVIDUAL DISC 80CARBO 05539510590 4" X 5/8" V 0947 INDIVIDUAL DISC 100CARBO 05539510589 4" X 5/8" V 0947 INDIVIDUAL DISC 120CARBO 05539510603 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 24CARBO 05539510602 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 36CARBO 05539510601 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 50CARBO 05539510600 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 60CARBO 05539510598 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 80CARBO 05539510597 4-1/2" X 7/8" V 0947 INDIVIDUAL DISC 120CARBO 05539510684 5" X 7/8" V 0947 INDIVIDUAL DISC 16CARBO 05539510683 5" X 7/8" V 0947 INDIVIDUAL DISC 24CARBO 05539510682 5" X 7/8" V 0947 INDIVIDUAL DISC 36CARBO 05539510680 5" X 7/8" V 0947 INDIVIDUAL DISC 50CARBO 05539510676 5" X 7/8" V 0947 INDIVIDUAL DISC 60CARBO 05539510675 5" X 7/8" V 0947 INDIVIDUAL DISC 80CARBO 05539510674 5" X 7/8" V 0947 INDIVIDUAL DISC 100CARBO 05539510673 5" X 7/8" V 0947 INDIVIDUAL DISC 120CARBO 05539510693 7" X 7/8" V 0947 INDIVIDUAL DISC 16CARBO 05539510692 7" X 7/8" V 0947 INDIVIDUAL DISC 24CARBO 05539510691 7" X 7/8" V 0947 INDIVIDUAL DISC 36CARBO 05539510690 7" X 7/8" V 0947 INDIVIDUAL DISC 50CARBO 05539510689 7" X 7/8" V 0947 INDIVIDUAL DISC 60CARBO 05539510688 7" X 7/8" V 0947 INDIVIDUAL DISC 80

CARBO 05539510686 7" X 7/8" V 0947 INDIVIDUAL DISC 100PartNo Description Grading

CARBO 05539510685 7" X 7/8" V 0947 INDIVIDUAL DISC 120CARBO 05539511324 7" X 7/8" V 0947 FLEX-LOC INDIVIDUAL DISC 24CARBO 05539511144 7" X 7/8" V 0947 FLEX-LOC INDIVIDUAL DISC 36CARBO 05539510702 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 24CARBO 05539510701 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 36CARBO 05539510700 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 50CARBO 05539510699 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 60CARBO 05539510698 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 80CARBO 05539510695 9-1/8" X 7/8" V 0947 INDIVIDUAL DISC 120

FEATURES: •Zirconia alumina abrasive. •Heavy-duty cloth backing. •Flex-Loc TR fastening system. BENEFITS: •Aggressive cut. •Stays sharp throughout life of disc. •Extended durability. •Reduced edge wear. •Quick, easy mounting and removal. For light to medium pressure grinding and deburring stainless steel, as well as blending and finishing. CARBO 05539520634 1-1/2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 36PartNo Description Grading

CARBO 05539520635 1-1/2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 50CARBO 05539520636 1-1/2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 60CARBO 05539520637 1-1/2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 80CARBO 05539520639 2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 36CARBO 05539520641 2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 50CARBO 05539520642 2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 60CARBO 05539520643 2" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 80CARBO 05539520644 3" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 24CARBO 05539520645 3" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 36CARBO 05539520646 3" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 50CARBO 05539520647 3" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 60CARBO 05539520648 3" FLEX-LOC TR YC 1186 INDIVIDUAL DISC 80

FEATURES: •Aluminum oxide abrasive. •Heavy-duty cloth backing. •Available with Flex-Loc TR and Flex-Loc TS fastening systems. BENEFITS: •Aggressive yet cool cut with long life. •Extended durability. •Reduced edge wear. •Quick, easy mounting and removal. For light to medium pressure grinding and deburring, as well as blending and finishing. CARBO 05539520664 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 36PartNo Description Grading

CARBO 05539520666 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 50CARBO 05539520667 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 60CARBO 05539520668 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 80CARBO 05539520669 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 100CARBO 05539520670 1-1/2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 120CARBO 05539520697 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 36CARBO 05539520699 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 50CARBO 05539520700 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 60CARBO 05539520701 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 80CARBO 05539520702 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 100CARBO 05539520703 1-1/2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 120CARBO 05539520353 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 24CARBO 05539520352 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 36

Discs, Flex-Loc TR and TS


Phone: 402-455-6151Toll Free: 800-488-9699

63

Red Zirconia Alumina Resin Fibre

Red Zirconia Alumina Resin Cloth

Abras

ives &

Brus

hes

AbrasivesDiscs, Flex-Loc TR and TSAluminum Oxide Resin ClothCARBO 05539520351 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 50PartNo Description Grading

CARBO 05539520678 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 60CARBO 05539520680 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 80CARBO 05539520681 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 100CARBO 05539520682 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 120CARBO 05539520683 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 150CARBO 05539520684 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 180CARBO 05539520685 2" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 240CARBO 05539520706 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 24CARBO 05539520707 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 36CARBO 05539520709 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 40CARBO 05539520710 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 50CARBO 05539520711 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 60CARBO 05539520712 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 80CARBO 05539520713 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 100CARBO 05539520714 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 120CARBO 05539520716 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 180CARBO 05539520718 2" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 240CARBO 05539520356 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 24CARBO 05539520355 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 36CARBO 05539520688 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 40CARBO 05539520354 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 50CARBO 05539520690 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 60CARBO 05539520691 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 80CARBO 05539520692 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 100CARBO 05539520693 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 120CARBO 05539520696 3" FLEX-LOC TR XC 0877 INDIVIDUAL DISC 240CARBO 05539520719 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 24CARBO 05539520720 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 36CARBO 05539520722 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 50CARBO 05539520723 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 60CARBO 05539520724 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 80CARBO 05539520725 3" FLEX-LOC TS XC 0877 INDIVIDUAL DISC 100

RollsAluminum Oxide Resin Cloth

FEATURES: •P-graded, brown aluminum oxide abrasive. •Full resin bond system. •Flexible cloth backing. •Dispenser boxed. BENEFITS: •Tough and durable. •Increased life. •Follows shapes and contours. •Convenience. Ideal for cleaning and deburring metal surfaces. May be used dry or with oil. Easily dispensed from the package. Cut or tear to desired length. CARBO 05539529317 1"X 10 YARDS - JCF 0852 HANDY ROLL P80PartNo Description Grading

CARBO 05539529316 1"X 10 YARDS - JCF 0852 HANDY ROLL P100CARBO 05539529315 1" X 10 YARDS - JCF 0852 HANDY ROLL P120CARBO 05539529314 1"X 10 YARDS - JCF 0852 HANDY ROLL P150CARBO 05539529313 1"X 10 YARDS - JCF 0852 HANDY ROLL P180CARBO 05539529312 1"X 10 YARDS - JCF 0852 HANDY ROLL P240CARBO 05539529311 1"X 10 YARDS - JCF 0852 HANDY ROLL P320CARBO 05539510141 1"X 50 YARDS - JCF 0851 ECONOMY ROLL P60CARBO 05539529328 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P100CARBO 05539529326 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P120CARBO 05539529325 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P150CARBO 05539529324 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P180CARBO 05539529323 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P220CARBO 05539529322 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P240

CARBO 05539529321 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P280PartNo Description Grading

CARBO 05539529320 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P320CARBO 05539529319 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P400CARBO 05539529318 1"X 50 YARDS - JCF 0852 ECONOMY ROLL P600CARBO 05539510945 1-1/2"X 50 YARDS - JCF 0851 ECONOMY ROLL P50CARBO 05539510947 1-1/2"X 50 YARDS - JCF 0851 ECONOMY ROLL P60CARBO 05539529339 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P80CARBO 05539529338 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P100CARBO 05539529337 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P120CARBO 05539529336 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P150CARBO 05539529335 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P180CARBO 05539529334 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P220CARBO 05539529333 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P240CARBO 05539529332 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P280CARBO 05539529331 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P320CARBO 05539529330 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P400CARBO 05539529329 1-1/2"X 50 YARDS - JCF 0852 ECONOMY ROLL P600CARBO 05539510585 2"X 50 YARDS - JCF 0851 ECONOMY ROLL P400CARBO 05539511102 2"X 50 YARDS - JCF 0851 ECONOMY ROLL P50CARBO 05539510340 2"X 50 YARDS - JCF 0851 ECONOMY ROLL P60CARBO 05539529350 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P80CARBO 05539529349 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P100CARBO 05539529348 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P120CARBO 05539529347 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P150CARBO 05539529346 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P180CARBO 05539529345 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P220CARBO 05539529344 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P240CARBO 05539529343 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P280CARBO 05539529342 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P320CARBO 05539529341 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P400CARBO 05539529340 2"X 50 YARDS - JCF 0852 ECONOMY ROLL P600

12017 is a soft, 1-1/4" thick canvas-faced pad. For use with disc adhesive and paper discs. For feather-edging with finer grit discs.

CARBO 05539512017 8" X 1-1/4" X 5/8" THREAD 3200PartNo Description Max. RPM

Vinyl-faced pad for use with Stick-On discs or conventional discs using disc adhesive.

CARBO 05539512021 5" X 5/16"-24 SHANK 10000PartNo Description Max. RPM

CARBO 05539512022 6" X 5/16"-24 SHANK 10000CARBO 05539512023 8" X 1/2" X 5/8"-11 THREAD 4800

Pads, Back-up, For Discs Using Disc Cement

Pads, Back-up, For Stick-On Discs

Phone: 402-455-6151Toll Free: 800-488-9699

64

Abrasives & Brushes

AbrasivesPads, Back-up, For Stick-On Vacuum Discs

Vinyl-faced pads for use with Stick-On discs with standard 5" and 6" vacuum hole patterns. CARBO 05539512025 5" X 5 HOLE 5/16"-24 SHANK 10000PartNo Description Max. RPM

CARBO 05539512026 6" X 6 HOLE 5/16"-24 SHANK 10000

Discs and Strips, PSA Conversion

Permanent adhesive on textile hook backing allows for low cost conversion of Stick-On pads to Grip-On. CARBO 05539529420 2-3/4" X 16-1/2"PartNo Description

CARBO 05539529418 6"CARBO 05539529419 8"

Pads, Back-up, For Grip-On Discs

Back-up pad for use with Grip-On discs. Incorporates unique hook and loop fastening system for neat, clean application and removal. CARBO 05539512028 5" X 5/16"-24 SHANK 10000PartNo Description Max. RPM

CARBO 05539512029 6" X 5/16"-24 SHANK 10000CARBO 05539512030 8" X 1/2" X 5/8"-11 THREAD 4800

Pad, Interface for Grip-On Discs

Soft, pliable foam pad which fastens to the standard 5" and 6" Grip-On back-up pad using a hook and loop system. It converts to standard pad into a fine finishing pad and enhances P1000, P1200 and P1500 fine sanding random orbital applications.

CARBO 05539520521 5" INTERFACE PADPartNo Description

CARBO 05539520520 6" INTERFACE PAD

Unique hook and loop fastening system for use with standard 5" and 6" vacuum hole patterns. CARBO 05539520358 5" X 5 HOLE 5/16"-24 SHANK 10000PartNo Description Max. RPM

CARBO 05539520359 6" X 6 HOLE 5/16"-24 SHANK 10000

Designed exclusively for use with E-ZView Flex-Loc Discs. These back-up pads allow easy, tool-free mounting. Specially designed mounting hole for easy alignment. The recessed lock-nut automatically lines disc up with back-up pad and allows more disc to contact work surface. CARBO 05539563975 4-1/12 X 5/8-11 13000PartNo Description Max. RPM

CARBO 05539563976 4-1/2 X 3/8-24 13000CARBO 05539563977 4-1/2 X M-14 13000CARBO 05539563979 5 X 5/8-11 13000CARBO 05539563395 5 X 7/16-20 PISTOL GRIP ADAPTER 20000CARBO 05539563835 7 X 5/8-11 HARD DENSITY 8600CARBO 05539563836 8 X 5/8-11 MEDIUM DENSITY 8600

For all-purpose fibre disc sanding. Curved ribs on pad face reduce loading and allow for cooler cut. Fits 5/8"-11 arbor. CARBO 05539564742 4" MEDIUM AIR-COOLED 12000PartNo Description Max. RPM

CARBO 05539562582 4-1/2" MEDIUM AIR-COOLED 11000CARBO 05539512033 5" MEDIUM AIR-COOLED 10000CARBO 05539512032 7" MEDIUM AIR-COOLED 8600

For use with Flex-Loc resin fibre discs. Molded rubber back-up pads provide quick change convenience.

CARBO 05539520412 7" HARD 8600PartNo Description Max. RPM

CARBO 05539520413 RETAINER NUT

Pads, Back-up, For Grip-On Vacuum Discs

Pads, Back-up, For E-ZView Edger Flex-LocDiscs

Pads, Back-up, For Resin Fibre Discs

Pads, Back-up, For Flex-Loc Resin Fibre Discs

Phone: 402-455-6151Toll Free: 800-488-9699

65

Abras

ives &

Brus

hes

AbrasivesPads, Back-up, For Flex-Loc TR and TS ClothDiscs

Molded rubber pad with a steel shank for quick mounting. Unique locking device on face provides convenience and quick change. Medium density for all purpose applications.

CARBO 05539520731 1-1/2" FLEX-LOC TR 30000PartNo Description Max. RPM

CARBO 05539520735 1-1/2" FLEX-LOC TS 25000CARBO 05539512539 2" FLEX-LOC TR 25000CARBO 05539512842 2" FLEX-LOC TS 25000CARBO 05539512540 3" FLEX-LOC TR 20000CARBO 05539512852 3" FLEX-LOC TS 20000

Pads, Back-up, For Stick-On Rolls

Rectangular sanding block for hand sanding with Stick-On rolls

CARBO 05539512031 2-3/4" X 5-1/2" SANDING BLOCKPartNo

Used to secure resin fibre discs to back-up pad.

CARBO 05539512568 5/8"-11PartNo Description

Cement, Disc

Pressure sensitive adhesive for attaching discs to back-up pads.

CARBO 05539512009 5 OZ. TYPE / 148 ML TUBEPartNo Description

CARBO 05539512010 16 OZ. CAN / 500 ML CAN

FEATURES: •Impregnated on one side with aluminum oxide grain. •Hook and loop fastening system.

BENEFITS: •Consistent finish. •Neat, clean application and removal. Deliver a consistent finish when needed to clean, deburr, blend or produce a finish on all types of metal, wood and plastic. Can also be used for the removal of light rust, oxidation and coatings.

CARBO 05539562621 2" BLANK DISC Course A/O BrownPartNo Description Grit/Abrasive Color

CARBO 05539562620 2" BLANK DISC Medium A/O MaroonCARBO 05539562619 2" BLANK DISC Very Fine A/O BlueCARBO 05539562624 3" BLANK DISC Course A/O BrownCARBO 05539562623 3" BLANK DISC Medium A/O MaroonCARBO 05539562622 3" BLANK DISC Very Fine A/O BlueCARBO 05539512515 4" BLANK DISC Course A/O BrownCARBO 05539512514 4" BLANK DISC Medium A/O MaroonCARBO 05539512513 4" BLANK DISC Very Fine A/O BlueCARBO 05539520420 4-1/2" BLANK DISC Course A/O BrownCARBO 05539520419 4-1/2" BLANK DISC Medium A/O MaroonCARBO 05539520418 4-1/2" BLANK DISC Very Fine A/O BlueCARBO 05539512519 5" BLANK DISC Course A/O BrownCARBO 05539512518 5" BLANK DISC Medium A/O MaroonCARBO 05539512517 5" BLANK DISC Very Fine A/O BlueCARBO 05539512522 6" BLANK DISC Course A/O BrownCARBO 05539512521 6" BLANK DISC Medium A/O MaroonCARBO 05539512520 6" BLANK DISC Very Fine A/O BlueCARBO 05539512525 7" BLANK DISC Course A/O BrownCARBO 05539512524 7" BLANK DISC Medium A/O MaroonCARBO 05539512523 7" BLANK DISC Very Fine A/O BlueCARBO 05539562627 8" BLANK DISC Course A/O BrownCARBO 05539562626 8" BLANK DISC Medium A/O MaroonCARBO 05539562625 8" BLANK DISC Very Fine A/O Blue

FEATURES: •Impregnated on one side with aluminum oxide grain. •Compatible with Standard Abrasives Quick Change attachment system.

BENEFITS: •Consistent finish. •Quick, easy mounting and removal. Deliver a consistent finish when used to clean, deburr, blend or finish all types of metal, wood and plastic. Can also be used for the removal of light rust, oxidation and coatings.

CARBO 05539512688 2" FLEX-LOC TS DISC Course A/O BrownPartNo Description Grit/Abrasive Color

CARBO 05539512689 2" FLEX-LOC TS DISC Medium A/O MaroonCARBO 05539512708 2" FLEX-LOC TS DISC Very Fine A/O BlueCARBO 05539512709 3" FLEX-LOC TS DISC Course A/O BrownCARBO 05539512718 3" FLEX-LOC TS DISC Medium A/O MaroonCARBO 05539512728 3" FLEX-LOC TS DISC Very Fine A/O BlueCARBO 05539555349 4" FLEX-LOC TS DISC Course A/O BrownCARBO 05539555350 4" FLEX-LOC TS DISC Medium A/O MaroonCARBO 05539555351 4" FLEX-LOC TS DISC Very Fine A/O Blue

Discs, Fibratex Surface BlendingDiscs, Grip-On Surface Blending

Discs, Flex-Loc TS Surface Blending

Phone: 402-455-6151Toll Free: 800-488-9699

66

Nut, Pad, for Resin Fibre Discs

Abrasives & Brushes

AbrasivesDiscs, Fibratex Surface BlendingDiscs, Flex-Loc TR Surface BlendingFEATURES: •Impregnated on one side with aluminum oxide grain. •Compatible with 3M Roloc attachment system. BENEFITS: •Consistent finish. •Quick, easy mounting and removal. Deliver a consistent finish when used to clean, deburr, blend or finish all types of metal, wood and plastic. Can also be used for the removal of light rust, oxidation and coatings. CARBO 05539520434 2" FLEX-LOC TR DISC Course A/O BrownPartNo Description Grit/Abrasive Color

CARBO 05539520433 2" FLEX-LOC TR DISC Medium A/O MaroonCARBO 05539520432 2" FLEX-LOC TR DISC Very Fine A/O BlueCARBO 05539520437 3" FLEX-LOC TR DISC Course A/O BrownCARBO 05539520436 3" FLEX-LOC TR DISC Medium A/O MaroonCARBO 05539520435 3" FLEX-LOC TR DISC Very Fine A/O BlueCARBO 05539520630 4" FLEX-LOC TR DISC Course A/O BrownCARBO 05539520629 4" FLEX-LOC TR DISC Medium A/O MaroonCARBO 05539520628 4" FLEX-LOC TR DISC Very Fine A/O Blue

FEATURES: •High performance Zirconia alumina abrasive. •High performance resin bond. •Exceptional balance. •Unique glass cloth design. •Best performing wheel. BENEFITS: •60% faster stock removal and a minimum of 3 times the life over aluminum oxide wheels. •Enhanced life; exceptional cut rate. •No vibration. •No bouncing on workpiece. •Less grinder maintenance. •Less operator fatigue. •No fraying or spalling of abrasive grit. •Highest productivity; lowest total grinding cost. Z24 - Outstanding results grinding stainless steel, high alloy steel, and all ferrous metals. Z24 LONG LIFE - Extended life when grinding stainless steel, high alloy steel and all ferrous metals.

CARBO 05539502864 3 X 1/4 X 3/8 TYPE 27-FOR RIGHTANGLE GRINDERS

Z24 18000PartNo Description Grading Max. RPM


Z24 15250CARBO 05539502868 4 X 1/4 X 5/8 TYPE 27-FOR RIGHT

ANGLE GRINDERSZ24 15250

CARBO 05539502873 4-1/2 X 1/4 X 5/8-11 TYPE 27-FOR RIGHTANGLE GRINDERS

Z24 13580CARBO 05539502872 4-1/2 X 1/4 X 7/8 TYPE 27-FOR RIGHT


CARBO 05539502877 5 X 1/4 X 5/8-11 TYPE 27-FOR RIGHTANGLE GRINDERS

Z24 12225CARBO 05539502876 5 X 1/4 X 7/8 TYPE 27-FOR RIGHT



Z24 10185




Z24 Long Life 8600CARBO 05539502881 7 X 1/4 X 7/8 TYPE 27-FOR RIGHT



Z24 Long Life 8600CARBO 05539502889 9 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT



Z24 Long Life 6600CARBO 05539502887 9 X 1/4 X 7/8 TYPE 27-FOR RIGHT



Z24 Long Life 6600CARBO 05539502892 7 X 1/4 X 7/8-11 TYPE 27-FOR RIGHT



Z24 8600CARBO 05539502894 9 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT


FEATURES: •Quality aluminum oxide or silicon carbide abrasive. •Advanced resin bond. •Exceptional balance. •Unique glass cloth design. BENEFITS: •Fast stock removal. •Free cutting without a reduction in wheel life. •No vibration. •No burning of work piece. •Less grinder maintenance. •Less operator fatigue. •No fraying or spalling of abrasive grit. A24 ALUMINUM OXIDE ABRASIVE: The choice for grinding all types of ferrous metals and various alloy steels. A30 ALUMINUM OXIDE ABRASIVE: Ideal for grinding all types of stainless steel and various hard alloys. Formulated to meet nuclear industry standards. A46 ALUMINUM OXIDE ABRASIVE: Engineered for grinding aluminum weld beads and fabricated parts. C24 SILICON CARBIDE ABRASIVE: Ideal for grinding non-metallic materials. Smooths and finishes concrete and masonry surfaces. CARBO 05539502836 4 X 1/4 X 3/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 15280

PartNo Description Grading Max. RPM

CARBO 05539502837 4 X 1/4 X 8/8 TYPE 27-FOR RIGHT ANGLEGRINDERS

Z24 15200CARBO 05539502843 4-1/2 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT


CARBO 05539502842 4-1/2 X 1/4 X 7/8 TYPE 27-FOR RIGHT ANGLEGRINDERS

Z24 13580CARBO 05539502847 5 X 1/4 X 7/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 12225


Z24 10185CARBO 05539502854 7 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 8600



GRINDERSZ24 6600



GRINDERSZ24 8600



GRINDERSZ24 6600


Z24 6600CARBO 05539561560 4-1/2 X 1/4 X 5/8-11 TYPE 30-FOR RIGHT

ANGLE GRINDERSA30 13580


A30 13580

Abrasive, Gold Aluminum Oxide

Phone: 402-455-6151Toll Free: 800-488-9699

67

Wheels, Depressed Center Premier Red Zirconia Alumina

Abras

ives &

Brus

hes

Abrasives

CARBO 05539561562 7 X 1/4 X 5/8-11 TYPE 30-FOR RIGHT ANGLEGRINDERS

A30 8600PartNo Description Grading Max. RPM


A30 6600CARBO 05539567292 9 X 1/4 X 7/8 TYPE 30-FOR RIGHT ANGLE

GRINDERSA30 6600


A46 13580CARBO 05539503588 4-1/2 X 1/4 X 7/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSA46 13580


A46 12225CARBO 05539503594 7 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT ANGLE

GRINDERSA46 8600


A46 8600CARBO 05539567291 9 X 1/4 X 7/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSA24 6600


C24 13580CARBO 05539503600 7 X 1/4 X 5/8-11 TYPE 27-FOR RIGHT ANGLE

GRINDERSC24 8600


C24 8600CARBO 05539503601 9 X 1/4 X 7/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 6600

FEATURES: •High performance Zirconia alumina abrasive. •High performance resin bond. •Exceptional balance. •Unique glass cloth design. •Best performing wheel. BENEFITS: •60% faster stock removal and a minimum of 3 times the life over aluminum oxide wheels. •Enhanced life; exceptional cut rate. •No vibration. •No bouncing on workpiece. •Less grinder maintenance. •Less operator fatigue. •No fraying or spalling of abrasive grit. •Highest productivity, lowest total grinding cost. Outstanding results cutting and light grinding stainless steel, high alloy steel and all ferrous metals. These wheels can be used for both cutting and light grinding. CARBO 05539507349 4 X 1/8 X 3/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 15280



Z24 13580CARBO 05539504701 4-1/2 X 1/8 X 7/8 TYPE 27-FOR RIGHT ANGLE

GRINDERSZ24 13580



GRINDERSZ24 8600


Z24 6600



FEATURES: •Aluminum Oxide Abrasive. •Resin bond. •High strength reinforced construction. •BFTK - side reinforced, rough sides. •Decimal thickness. •BFW - side reinforced, rough sides.

BENEFITS: •Fast cut rate and long life. •Free cutting action. •Burn-free cutting. •Resists breakage and provides straight cuts. •Maximum cut rate. •Very narrow cuts; minimum kerf loss. •Versatile; durable free cutting. Used primarily for cutting off high speed steel drill bits and end mills, as well as slotting dies.

CARBO 05539518986 6 X .060 X 1-1/4 FOR HSS AND TOOLSTEELS

A60-OBFTK 10190PartNo Description Grading Max. RPM

CARBO 05539509197 7 X .035 X 5/8 FOR HSS AND TOOLSTEELS

A60-OBFTK 8730CARBO 05539509196 7 X .035 X 1-1/4 FOR HSS AND TOOL

STEELSBA60-OBFTK 8730



STEELSBA60-OBFTK 8730

CARBO 05539562844 7 X 1/16 X 1-1/4 FOR HSS AND TOOLSTEELS

A36-TBFW 8730CARBO 05539501911 8 X .035 X 5/8 FOR HSS AND TOOL

STEELSA60-OBFTK 7640



STEELSA60-OBFTK 7640

CARBO 05539562845 8 X 1/16 X 5/8 FOR HSS AND TOOLSTEELS

A36-TBFW 7640

Phone: 402-455-6151Toll Free: 800-488-9699

68

Call to Discuss Our

Integrated Supply Solutions 800-488-9699

Wheels, Depressed Center, Gold Aluminum Oxide

Wheels, Depressed Center for Light Grinding Premier Red Zirconia Alumina

Wheels, Toolroom Cut-off, Reinforced Aluminum Oxide

Abrasives & Brushes

Abrasives

FEATURES: •Aluminum Oxide Abrasive. •Resin bond.

BENEFITS: •Fast cut rate and long life. •Free cutting action. •Burn-free cutting. •Long life For use on machines where the work is rigidly clamped and the wheel operates on a controlled cutting plane with no twisting or lateral stresses. Ideal for slotting dies or cutting off high speed steel drills and end mills.


A60-OB5SW 7640PartNo Description Grading Max.

RPM


A60-MB5DW 5460CARBO 05539509187 7 X 1/32 X 1-1/4 FOR HSS AND TOOL

STEELSA60-OB5SW 5460


A70-OB5SW 5460CARBO 05539509185 7 X 1/16 X 1-1/4 FOR HSS AND TOOL



A60-OB5SW 6550CARBO 05539509183 8 X 1/16 X 1-1/4 FOR HSS AND TOOL



A60-MB5SW 5730CARBO 05539562839 10 X 1/16 X 5/8 FOR HSS AND TOOL

STEELSA46-OB5RW 4585

CARBO 05539509181 10 X 1/16 X 5/8 FOR HSS AND TOOLSTEELS

A60-OB5SW 4585

FEATURES: •A blend of high performance ceramic alumina and zirconia alumina abrasives. •High performance resin bond. •High strength reinforcement. BENEFITS: •Fastest cut rate on steel, stainless steel and exotic alloys. •Cool cutting action. •3 times the life of aluminum oxide wheels. •Long wheel life. •Resists breakage. This highest performing abrasive blend makes these wheels ideal for cutting all types of stainless steel and steel alloys. Used on hand-held cut-off machines. CARBO 05539503501 3 X .035 X 1/4 FOR STAINLESS

STEEL/METALMZ60-T 25445


CARBO 05539503502 3 X .035 X 3/8 FOR STAINLESSSTEEL/METAL

MZ60-T 25445CARBO 05539503503 3 X 1/16 X 1/4 FOR STAINLESS


CARBO 05539503504 3 X 1/16 X 3/8 FOR STAINLESSSTEEL/METAL



CARBO 05539503506 4 X .035 X 1/4 FOR STAINLESSSTEEL/METAL

MZ60-T 19100CARBO 05539503507 4 X .035 X 3/8 FOR STAINLESS


CARBO 05539503508 4 X 1/16 X 3/8 FOR STAINLESSSTEEL/METAL



FEATURES: •Aluminum Oxide Abrasive. •Resin bond. •High-strength, reinforced construction. •BFTK - side reinforced, rough sides. •BFW - side reinforced, rough sides. BENEFITS: •Fast cut rate. •Free cutting action. •Burn-free cutting. •Long life. •Resists breakage and provides straight cutting. •Maximum cut rate; minimum kerf loss. •Versatile, durable free cutting. For cutting off ferrous metals, alloy steels and cast iron. CARBO 05539509278 2 X .035 X 1/8 FOR STEEL/METAL A60-OBFTK 30560PartNo Description Grading Max. RPM

CARBO 05539509277 2 X .035 X 1/4 FOR STEEL/METAL A60-OBFTK 30560CARBO 05539509276 2 X .035 X 3/8 FOR STEEL/METAL A60-OBFTK 30560CARBO 05539509275 2 X 1/16 X 1/4 FOR STEEL/METAL A36-TBFW 30560CARBO 05539509274 2 X 1/16 X 1/4 FOR STEEL/METAL A60-TBFW 30560CARBO 05539509269 3 X .035 X 1/4 FOR STEEL/METAL A60-OBFTK 25445CARBO 05539509268 3 X .035 X 3/8 FOR STEEL/METAL A60-OBFTK 25445CARBO 05539509267 3 X .060 X 1/4 FOR STEEL/METAL A60-OBFTK 25445CARBO 05539509266 3 X .060 X 1/8 FOR STEEL/METAL A60-OBFTK 25445CARBO 05539509265 3 X 1/16 X 1/4 FOR STEEL/METAL A36-TBFW 25445CARBO 05539509264 3 X 1/16 X 1/4 FOR STEEL/METAL A60-TBFW 25445

Wheels, Reinforced Cut-off for PortableMachines

Abrasive, Gold Reinforced Aluminum Oxide

Phone: 402-455-6151Toll Free: 800-488-9699

69

Your Midwest Distributor for over 96 Years

Wheels, Toolroom Cut-off, Non-reinforced Aluminum Oxide

Red Reinforced Ceramic Alumina/Zirconia Alumina

Abras

ives &

Brus

hes

AbrasivesWheels, Reinforced Cut-off for PortableMachinesAbrasive, Gold Reinforced Aluminum OxideCARBO 05539509263 3 X 1/16 X 3/8 FOR STEEL/METAL A36-TBFW 25445PartNo Description Grading Max. RPM

CARBO 05539509262 3 X 1/16 X 3/8 FOR STEEL/METAL A60-TBFW 25445CARBO 05539509261 3 X 1/8 X 1/4 FOR STEEL/METAL A36-TBFW 25445CARBO 05539509260 3 X 1/4 X 3/8 FOR STEEL/METAL A60-TBFW 25445CARBO 05539509258 4 X .035 X 1/4 FOR STEEL/METAL A60-OBFTK 19100CARBO 05539509257 4 X .035 X 3/8 FOR STEEL/METAL A60-OBFTK 19100CARBO 05539509255 4 X 1/16 X 1/4 FOR STEEL/METAL A36-TBFW 19100CARBO 05539509254 4 X 1/16 X 3/8 FOR STEEL/METAL A36-TBFW 19100CARBO 05539509253 4 X 1/16 X 1/2 FOR STEEL/METAL A36-TBFW 19100CARBO 05539509252 4 X 1/8 X 3/8 FOR STEEL/METAL A36-TBFW 19100Wheels, Reinforced Cut-off for PortableCircular Saws

FEATURES: •Aluminum Oxide Abrasive. •Resin bond. •High-strength, reinforced construction.

BENEFITS: •Fast cut rate. •Burn-free cutting. •Long life. •Resists breakage and provides straight cuts. Used on hand-held portable circular saws to cut steel and all types of metals.

CARBO 05539509199 6 X .040 X 5/8 FAST CUT FORSTEEL/METAL

A60-Q 10185PartNo Description Grading Max. RPM

CARBO 05539509243 7 X 1/16 X 5/8 FAST CUT FORSTEEL/METAL

A36-TBFW 8730CARBO 05539509240 7 X 3/32 X D.M. FAST CUT FOR

STEEL/METALA24-T 8730

CARBO 05539509238 8 X 1/16 X 5/8 FAST CUT FORSTEEL/METAL

A36-TBFW 7640CARBO 05539509235 8 X 3/32 X D.M. FAST CUT FOR

STEEL/METALA24-T 7640

CARBO 05539509223 7 X 1/8 X 5/8 LONG LIFE FORSTEEL/METAL

A30-TBFW 8730CARBO 05539509237 8 X 3/32 X 5/8 LONG LIFE FOR

STEEL/METALA24-TBFW 7640

CARBO 05539509249 7 X 3/32 X 5/8 FOR STAINLESS STEEL A36-XBFW 8730CARBO 05539509248 8 X 3/32 X 5/8 FOR STAINLESS STEEL A36-VBFW 7640

FEATURES: •Durable zirconia alumina/aluminum oxide abrasive blend. •Unique high-strength reinforced construction. •Extra thin. BENEFITS: •3 times the life and 2 times the cut rate of standard aluminum oxide wheels. •Maximum productivity, lowest total grinding costs. •Provides strength for use on right angle grinders. •Flexible, resilient. •Resists breakage. •Less binding; quick cutting action. Excels on a broad range of materials. from alloys and stainless to gray iron. CARBO 05539566206 4-1/2 X 1/16 X 7/8 TYPE 41-FOR RIGHT

ANGLE GRINDERSZA60-Q 13580



ZA60-Q 12225CARBO 05539566208 6 X 1/16 X 7/8 TYPE 41-FOR RIGHT ANGLE

GRINDERSZA60-Q 10185

FEATURES: •Quality aluminum oxide abrasive. •Advanced resin bond. •Unique high-strength, reinforced construction. •Extra thin. BENEFITS: •Fast stock removal. •Free cutting action. •Long life •No bounce. •Provides strength for use on right angle grinders. •Flexible, resilient. •Resists breakage. •Less binding; quick cutting action. For general purpose cutting of stainless steel, steel and metal material with a right angle grinder.

CARBO 05539563951 4 X .045 X 5/8 TYPE 41-FOR RIGHT ANGLEGRINDERS

A60-Q 15280PartNo Description Grading Max. RPM


A60-Q 15280CARBO 05539563952 4-1/2 X .045 X 7/8 TYPE 41-FOR RIGHT

ANGLE GRINDERSA60-Q 13580

CARBO 05539527225 4-1/2 X 3/32 X 7/8 TYPE 41-FOR RIGHTANGLE GRINDERS

A60-Q 13580CARBO 05539563953 5 X .045 X 7/8 TYPE 41-FOR RIGHT ANGLE

GRINDERSA60-Q 12225


A60-Q 12225CARBO 05539563954 6 X .045 X 7/8 TYPE 41-FOR RIGHT ANGLE

GRINDERSA60-Q 10185


A60-Q 10185

Wheels, Reinforced Cut-off for Right AngleGrinders

Phone: 402-455-6151Toll Free: 800-488-9699

70


Reinforced Aluminum Oxide

RedCut Reinforced Zirconia Alumina/ Aluminum Oxide

GoldCut Reinforced Aluminum Oxide

Abrasives & Brushes

AbrasivesWheels, Reinforced Cut-off for Right AngleGrindersAbrasive, Gold Reinforced Aluminum OxideFEATURES: •Quality aluminum oxide abrasive. •Advanced resin bond. •Extra thin depressed center cutting-off wheels. •Specially reinforced. BENEFITS: •Burn-free cutting. •Long life. •No bounce. •Quick cutting action. •Minimal kerf loss. •Added safety, strength and straight cuts. Excellent choice for cutting all types of metals and various alloy steels.

CARBO 05539561551 4-1/2 X .045 X 7/8 TYPE 42-FOR RIGHT ANGLEGRINDERS

A30 13580PartNo Description Grading Max. RPM

CARBO 05539561553 5 X .045 X 7/8 TYPE 42-FOR RIGHT ANGLEGRINDERS

A30 12225CARBO 05539561554 6 X .045 X 7/8 TYPE 42-FOR RIGHT ANGLE

GRINDERSA30 10185


FEATURES: •Premium zirconia alumina abrasive. •High performance resin bond. •High-strength, externally reinforced construction.

BENEFITS: •Fast cut rate. •3 times the life of aluminum oxide. •Ideal for cutting stainless steel. •Works best on dry cuts. •Most free cutting. •Long life. •Resists breakage and provides straight cuts. For use on table-top machines. Best choice for cutting light tubing, angle iron, exhaust pipes, steel extrusions, stainless, alloyed steel and many non-ferrous metals.

CARBO 05539507079 12 X 7/64 X 1 FOR TYPE 41 FAST CUT 2ZA36-NB35FW 5095PartNo Description Grading Max.

RPM

CARBO 05539507080 14 X 7/64 X 1 FOR TYPE 41 FAST CUT 2ZA36-NB35FW 4365CARBO 05539565197 14 X 7/64 X 1 FOR TYPE 41 FAST CUT 2ZA36-NB35FW 4365CARBO 05539507083 16 X 7/64 X 1 FOR TYPE 41 FAST CUT 2ZA36-NB35FW 3820CARBO 05539507082 14 X 7/64 X 1 FOR TYPE 41 LONG LIFE 2ZA36-PB35FW 4365

FEATURES: •Quality aluminum oxide abrasive. •Resin bond. •High-strength, externally reinforced construction. BENEFITS: •Fast cut rate. •Burn-free cutting. •Resists breakage and provides straight cuts. For use on table-top machines. Ideal for cutting light tubing, angle iron, exhaust pipes and steel extrusions.

CARBO 05539507087 14 X 7/64 X 1 FOR TYPE 41 FAST CUT A36-NBFW 4365PartNo Description Grading Max.

RPM

CARBO 05539567290 10 X 1/8 X 1 FOR TYPE 41 LONG LIFE A30-S 6110CARBO 05539507085 12 X 7/64 X 1 FOR TYPE 41 LONG LIFE A36-PBFW 5095CARBO 05539507086 14 X 7/64 X 1 FOR TYPE 41 LONG LIFE A36-PBFW 4365CARBO 05539507088 16 X 7/64 X 1 FOR TYPE 41 LONG LIFE A36-PBFW 3820

FEATURES: •Premium zirconia alumina abrasive. •High performance resin bond. •High-strength, externally reinforced construction. BENEFITS: •Fast cut rate. •3 times the life of aluminum oxide. •Free cutting action. •Long life. •Resists breakage. Use when grinding with a hand-held machine. Best choice for grinding steel, steel alloys and cast iron.

CARBO 05539509169 6 X 1 X 5/8 FOR TYPE 1 PORTABLEGRINDER

2ZA14-RBF64 8000PartNo Description Grading Max.

RPM


2ZA14-RBF64 6000

FEATURES: •Aluminum Oxide Abrasive. •Resin bond. •High-strength, reinforced construction. BENEFITS: •Fast cut rate. •Free cutting action. •Long life. •Resists breakage. Use when grinding with a hand-held machine. The economical choice for grinding steel, steel alloys and cast iron.


GA16-P5BFS 6050PartNo Description Grading Max. RPM


GA16-P5BFS 4540CARBO 05539506618 3 X 1/2 X 3/8 FOR TYPE 1 PORTABLE

GRINDERGA24-PBFF 18080

Wheels, Portable Snagging

Abrasive, Reinforced Aluminum Oxide

Phone: 402-455-6151Toll Free: 800-488-9699

71

A30 8000

Wheels, Reinforced Cut-off for Chop Saws Red Reinforced Zirconia Alumina

Gold Reinforced Aluminum Oxide

Red Reinforced Zirconia Alumina

Abras

ives &

Brus

hes

AbrasivesWheels, Portable Snagging

FEATURES: •Premium zirconia alumina abrasive blend. •High performance resin bond. BENEFITS: •Fast cut rate. •3 times the life of aluminum oxide abrasive. •Free cutting action. Best choice for grinding steel, steel alloys and cast iron, Used for grinding weld seams, cleaning metal before welding, grinding off fins and parting lines, smoothing surfaces on castings, and smoothing surfaces before painting or plating.

CARBO 05539563937 4 / 3 X 2 X 5/8-11 FOR TYPE 11PORTABLE CUP GRINDERS

2ZA16-QB64 9070 3/4 3/4PartNo Description Grading Max.

RPMRim Back

CARBO 05539563935 5 / 3-13/16 X 2 X 5/8-11 FOR TYPE11 PORTABLE CUP GRINDERS

2ZA16-QB64 7260 1 3/4CARBO 05539500694 6 / 4-13/16 X 2 X 5/8-11 FOR TYPE

11 PORTABLE CUP GRINDERS2ZA16-QB64 6000 1-1/2 3/4

Bushing, Standard BackFEATURES: •Premium zirconia alumina abrasive blend. •High performance resin bond. BENEFITS: •Fast cut rate. •3 times the life of aluminum oxide abrasive. •Free cutting action. Best choice for grinding steel, steel alloys and cast iron, Used for grinding weld seams, cleaning metal before welding, grinding off fins and parting lines, smoothing surfaces on castings, and smoothing surfaces before painting or plating.


2ZA16-QB64 9070 3/4 3/4PartNo Description Grading Max.

RPM Rim Back

CARBO 05539509156 5 / 3-3/4 X 2 X 5/8-11 FOR TYPE 11PORTABLE CUP GRINDERS

2ZA16-QB64 7260 1 3/4CARBO 05539508397 6 / 4-3/4 X 2 X 5/8-11 FOR TYPE 11

PORTABLE CUP GRINDERS2ZA14-RB64 6000 1-1/2 3/4


2ZA16-PB64 6000 1-1/2 3/4CARBO 05539507176 6 / 4-3/4 X 2 X 5/8-11 FOR TYPE 11

PORTABLE CUP GRINDERS2ZA16-QB64 6000 1-1/2 3/4

Abrasive, Aluminum OxideBushing, Full Steel BackFEATURES: •Quality aluminum oxide abrasive. •Resin bond. BENEFITS: •Fast cut rate. •Free cutting action. Economical choice for grinding steel, steel alloys and all ferrous metals.


A16-PB5 9070 3/4 3/4PartNo Description Grading Max.

RPMRim Back


A24-PB5 7260 1 3/4CARBO 05539507182 6 / 4-13/16 X 2 X 5/8-11 FOR TYPE 11

PORTABLE CUP GRINDERSA16-PB5 6000 1-1/2 3/4

FEATURES: •Quality aluminum oxide abrasive. •Resin bond. BENEFITS: •Fast cut rate. •Free cutting action. Economical choice for grinding steel, steel alloys and all ferrous metals.


A16-PB5 9070 3/4 3/4PartNo Description Grading Max.

RPMRim Back


A24-PB5 7260 1 3/4CARBO 05539509160 6 / 4-3/4 X 2 X 5/8-11 FOR TYPE 11



A16-QB5 6000 1-1/2 3/4CARBO 05539509159 6 / 4-3/4 X 2 X 5/8-11 FOR TYPE 11



A24-RB5 6000 1-1/2 3/4

FEATURES: •Premium zirconia alumina abrasive blend. •High performance resin bond. BENEFITS: •Fastest cut rate. •3 times the life of aluminum oxide abrasive. •Free cutting action. The best choice for grinding steel, steel alloys and cast iron, for removing burrs and flash and finishing any type of metal surface in a confined area. CARBO 05539520886 2 X 3 X 5/8-11 TYPE 16 CONE 2ZA20-R 18145PartNo Description Grading Max. RPM

CARBO 05539520887 2-3/4 X 3-1/2 X 5/8-11 TYPE 16 CONE 2ZA20-R 13195CARBO 05539520889 2 X 3 X 5/8-11 TYPE 18 PLUG 2ZA20-R 18145CARBO 05539520893 1-1/2 X 3 X 5/8-11 TYPE 18R PLUG 2ZA20-R 24190CARBO 05539520891 2 X 3 X 5/8-11 TYPE 18 PLUG 2ZA20-R 18145

FEATURES: •Performance zirconia alumina/aluminum oxide abrasive blend. •Resin bond. BENEFITS: •Fast cut rate. •Easily grinds scale-covered parts. •Long life. Excellent for grinding steel, steel alloys and cast iron, for removing burrs and flash and finishing any type of metal surface in a confined area.

CARBO 05539563710 1-1/2 X 3 X 3/8-24 TYPE 16 CONE 3ZA24-R 24190PartNo Description Grading Max. RPM

CARBO 05539563711 1-1/2 X 3 X 5/8-11 TYPE 16 CONE 3ZA20-R 24190CARBO 05539563712 2 X 3 X 5/8-11 TYPE 16 CONE 3ZA20-R 18145CARBO 05539563713 2-3/4 X 3-1/2 X 5/8-11 TYPE 16 CONE 3ZA16-R 13195CARBO 05539563714 2 / 3/4 X 3 X 5/8-11 TYPE 17R CONE 3ZA20-R 18145CARBO 05539563715 2 X 3 X 5/8-11 TYPE 18 PLUG 3ZA20-R 18145CARBO 05539563716 2 X 3 X 5/8-11 TYPE 18 PLUG 3ZA24-R 18145

Bushing, Standard Back

Cones and Plugs, Portable Snagging

Phone: 402-455-6151Toll Free: 800-488-9699

72

Red Zirconia Alumina Bushing, Full Steel Back

Red Zirconia Alumina

Gold Zirconia Alumina/Aluminum Oxide

Abrasives & Brushes

Abrasives

FEATURES: •Performance aluminum oxide abrasive. •Resin bond. BENEFITS: •Fast stock removal. •Free cutting action. The economical choice for grinding steel or iron castings removing burrs and flash and finishing metal surfaces in confined areas. CARBO 05539564069 1-1/2 X 2 X 3/8-24 TYPE 16 CONE A24-R 24190PartNo Description Grading Max. RPM

CARBO 05539564068 1-1/2 X 2-1/2 X 3/8-24 TYPE 16 CONE A24-R 24190CARBO 05539564072 1-1/2 X 3 X 3/8-24 TYPE 16 CONE A24-R 24190CARBO 05539509154 1-1/2 X 3 X 5/8-11 TYPE 16 CONE A24-R 24190CARBO 05539564070 2 X 3 X 3/8-24 TYPE 16 CONE A24-R 18145CARBO 05539509153 2 X 3 X 5/8-11 TYPE 16 CONE A24-R 18145CARBO 05539509152 1-3/4 X 3-1/2 X 5/8-11 TYPE 16 CONE A24-R 13195CARBO 05539564073 3 X 3 X 5/8-11 TYPE 16 CONE A24-R 12100CARBO 05539564071 3 X 4 X 5/8-11 TYPE 16 CONE A24-R 12100CARBO 05539509150 1-1/2 / 1/2 X 3 X 3/8-24 TYPE 17 CONE A24-R 24190CARBO 05539509149 2 / 1/2 X 3 X 5/8-11 TYPE 17 CONE A24-R 18145CARBO 05539564076 1-1/2 / 3/4 X 3 X 3/8-24 TYPE 17R CONE A24-R 24190CARBO 05539564077 2 / 3/4 X 3 X 5/8-11 TYPE 17R CONE A24-R 18145CARBO 05539509145 1-1/2 X 2-1/2 X 5/8-11 TYPE 18 PLUG A24-R 24190CARBO 05539509144 1-1/2 X 3 X 3/8-24 TYPE 18 PLUG A24-R 24190CARBO 05539509143 1-1/2 X 3 X 5/8-11 TYPE 18 PLUG A24-R 24190CARBO 05539509142 2 X 3 X 3/8-24 TYPE 18 PLUG A24-R 18145CARBO 05539509141 2 X 3 X 5/8-11 TYPE 18 PLUG A24-R 18145CARBO 05539509139 3 X 4 X 5/8-11 TYPE 18 PLUG A24-R 12095CARBO 05539564074 1-1/2 X 2-1/2 X 3/8-24 TYPE 18R PLUG A24-R 24190CARBO 05539509138 1-1/2 X 3 X 3/8-24 TYPE 18R PLUG A24-R 24190CARBO 05539509137 1-1/2 X 3 X 5/8-11 TYPE 18R PLUG A24-R 24190CARBO 05539509136 2 X 3 X 5/8-11 TYPE 18R PLUG A24-R 18145CARBO 05539509134 3 X 4 X 5/8-11 TYPE 18R PLUG A24-R 12095

Wheels, Toolroom

FEATURES: •High performance ceramic alumina/aluminum oxide abrasive blend - blue. •Self-sharpening abrasive. •High performance vitrified bond. •Excellent total performance. BENEFITS: •Fast stock removal on moderate to very heavy stock removal applications. •Cool cutting. •Less burn on part. •Dressing frequency reduced. •Enhanced wheel life. •Superior form and corner holding. •Highest productivity, lowest total grinding cost. The best choice for grinding all high speed tool steels. Medalist has the versatility to grind easy to difficult-to-grind steels. Use VL bond for general purpose applications or medium contact areas. Use VLP bond on wide contact areas where heat is an issue. KEY OPERATING TIPS FOR MAXIMIZING GRINDING PERFORMANCE WITH MEDALIST WHEELS: Change one parameter at a time. 1. Increase infeed 50%. 2. Increase traverse rate 25%. 3. Reduce dressing infeed 25%.

CARBO 05539562350 6 X 1/4 X 1-1/4 TYPE 1 WHEEL 80-KVL 4140PartNo Description Grading Max.

RPM

CARBO 05539562351 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 46-JVL 3600CARBO 05539527241 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 60-IVL 3600CARBO 05539527242 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 60JVL 3600

CARBO 05539527243 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 60-KVL 3600PartNo Description Grading Max.

RPM

CARBO 05539527244 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 80-JVL 3600CARBO 05539527245 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 80-KVL 3600CARBO 05539527247 7 X 1/4 X 1-1/4 TYPE 1 WHEEL 100-KVL 3600CARBO 05539527248 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-GVLP 3600CARBO 05539527250 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-IVL 3600CARBO 05539527251 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-JVL 3600CARBO 05539527252 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-KVL 3600CARBO 05539527253 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-GVLP 3600CARBO 05539527255 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-IVL 3600CARBO 05539527254 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-IVLP 3600CARBO 05539527256 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-JVL 3600CARBO 05539527257 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-KVL 3600CARBO 05539527258 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-LVL 3105CARBO 05539527259 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 80-IVL 3105CARBO 05539527260 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 80-JVL 3105CARBO 05539527261 7 X 1/2 X 1-1/4 TYPE 1 WHEEL 80-KVL 3105CARBO 05539527262 7 X 3/4 X 1-1/4 TYPE 1 WHEEL 46-KVL 3600CARBO 05539527263 7 X 3/4 X 1-1/4 TYPE 1 WHEEL 60-KVL 3600CARBO 05539527264 7 X 1 X 1-1/4 TYPE 1 WHEEL 46-JVL 3600CARBO 05539562357 8 X 1/4 X 1-1/4 TYPE 1 WHEEL 80-JVL 3600CARBO 05539527267 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-GVLP 3600CARBO 05539562359 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-HVLP 3600CARBO 05539527268 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-IVL 3600CARBO 0553962360 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-IVLP 3600CARBO 05539527269 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-JVL 3600CARBO 05539527270 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 46-KVL 3600CARBO 05539562361 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-GVLP 3600CARBO 05539527271 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 60.IVL 3600CARBO 05539527272 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-JVL 3600CARBO 05539527273 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 60-KVL 3600CARBO 05539562363 8 X 1/2 X 1-1/4 TYPE 1 WHEEL 80-JVL 3600CARBO 05539527274 8 X 3/4 X 1-1/4 TYPE 1 WHEEL 46-IVL 3105CARBO 05539527275 8 X 3/4 X 1-1/4 TYPE 1 WHEEL 46-JVL 3600CARBO 05539527276 8 X 3/4 X 1-1/4 TYPE 1 WHEEL 46-KVL 2485CARBO 05539527277 8 X 3/4 X 1-1/4 TYPE 1 WHEEL 60-JVL 2485CARBO 05539562365 8 X 1 X 1-1/4 TYPE 1 WHEEL 46-IVL 2485CARBO 05539562379 8 X 1 X 1-1/4 TYPE 1 WHEEL 60-KVL 2485CARBO 05539527278 10 X 1 X 3 TYPE 1 WHEEL 46-GVLP 2070CARBO 05539527279 10 X 1 X 3 TYPE 1 WHEEL 46-IVL 2070CARBO 05539527280 10 X 1 X 3 TYPE 1 WHEEL 46-JVL 2070CARBO 05539527282 10 X 1 X 3 TYPE 1 WHEEL 60-JVL 2070CARBO 05539562382 12 X 3/4 X 1-1/4 TYPE 1 WHEEL 46-OVL 2070CARBO 05539562325 12 X 1 X 3 TYPE 1 WHEEL 46-HVLP 2070CARBO 05539527283 12 X 1 X 3 TYPE 1 WHEEL 46-IVL 2070CARBO 05539527284 12 X 1 X 3 TYPE 1 WHEEL 46-JVL 2070CARBO 05539562328 12 X 1 X 3 TYPE 1 WHEEL 60-GVLP 2070CARBO 05539527285 12 X 1 X 3 TYPE 1 WHEEL 60-IVL 2070CARBO 05539562332 12 X 1 X 5 TYPE 1 WHEEL 46-IVL 2070CARBO 05539527287 12 X 1 X 5 TYPE 1 WHEEL 46-JVL 2070CARBO 05539527290 12 X 1 X 5 TYPE 1 WHEEL 60-JVL 2070CARBO 05539562337 12 X 1-1/2 X 5 TYPE 1 WHEEL 60-GVLP 2070CARBO 05539562339 14 X 1 X 3 TYPE 1 WHEEL 46-IVL 1800CARBO 05539527291 14 X 1 X 5 TYPE 1 WHEEL 46-GVLP 1800CARBO 05539562341 14 X 1 X 5 TYPE 1 WHEEL 46-HVLP 1800CARBO 05539562342 14 X 1 X 5 TYPE 1 WHEEL 46-IVL 1800CARBO 05539527292 14 X 1 X 5 TYPE 1 WHEEL 46-JVL 1800CARBO 05539527293 14 X 1 X 5 TYPE 1 WHEEL 60-JVL 1800CARBO 05539562345 14 X 1 X 5 TYPE 1 WHEEL 80-JVL 1800CARBO 05539527294 14 X 1-1/2 X 5 TYPE 1 WHEEL 46-GVLP 1800CARBO 05539527295 14 X 1-1/2 X 5 TYPE 1 WHEEL 46-IVL 1800CARBO 05539527296 14 X 1-1/2 X 5 TYPE 1 WHEEL 46-JVL 1800CARBO 05539562346 14 X 1-1/2 X 5 TYPE 1 WHEEL 60-IVL 1800CARBO 05539527297 14 X 1-1/2 X 5 TYPE 1 WHEEL 60-IVLP 1800CARBO 05539527298 14 X 1-1/2 X 5 TYPE 1 WHEEL 60-JVL 1800CARBO 05539562347 14 X 1-1/2 X 5 TYPE 1 WHEEL 80-KVL 1800CARBO 05539562348 14 X 2 X 5 TYPE 1 WHEEL 46-JVL 1800CARBO 05539562349 14 X 2 X 5 TYPE 1 WHEEL 60-JVL 1800

Phone: 402-455-6151Toll Free: 800-488-9699

73


Cones and Plugs, Portable Snagging, Aluminum Oxide

Ceramic Alumina For Surface, Cylindrical and Tool & Cutter Grinders

Abras

ives &

Brus

hes

Abrasives


CARBO 05539527299 7 X 3/4 X 1-1/4 TYPE 5 WHEEL 46-IVL 3600PartNo Description Grading Max.

RPM

CARBO 05539527300 7 X 1 X 1-1/4 TYPE 5 WHEEL 46-JVL 3600CARBO 05539527301 7 X 1 X 1-1/4 TYPE 5 WHEEL 60-JVL 3600CARBO 05539562370 7 X 1 X 1-1/4 TYPE 5 WHEEL 60-KVL 3600CARBO 05539562366 12 X 1-1/2 X 5 TYPE 5 WHEEL 46-GVLP 2070CARBO 05539562367 14 X 1-1/2 X 5 TYPE 5 WHEEL 46-JVL 1800CARBO 05539562368 14 X 1-1/2 X 5 TYPE 5 WHEEL 60-JVL 1800


CARBO 05539562371 4 / 3 X 1-1/2 X 1-1/4 TYPE 11 WHEEL 46-IVLP 5730 1/4 1/2PartNo Description Grading Max.

RPMRim Back

CARBO 05539527302 4 / 3 X 1-1/2 X 1-1/4 TYPE 11 WHEEL 46-JVL 5730 1/4 1/2CARBO 05539527303 4 / 3 X 1-1/2 X 1-1/4 TYPE 11 WHEEL 60-JVL 5730 1/4 1/2CARBO 05539562373 4 / 3 X 1-1/2 X 1-1/4 TYPE 11 WHEEL 80-KVL 5730 1/4 1/2CARBO 05539527305 5 / 3-3/4 X 1-3/4 X 1-1/4 TYPE 11

WHEEL46-JVL 4585 1/4 1/2

CARBO 05539527306 5 / 3-3/4 X 1-3/4 X 1-1/4 TYPE 11WHEEL

60-KVL 4585 1/4 1/2PartNo Description Grading Max.

RPMRim Back


60-LVL 4585 1/4 1/2CARBO 05539527308 6 X 1/2 X 1-1/4 TYPE 11 WHEEL 46-JVL 4140 3/8 5/16CARBO 05539527309 6 X 1/2 X 1-1/4 TYPE 11 WHEEL 60-LVL 4140 3/8 5/16CARBO 05539527310 6 X 3/4 X 1-1/4 TYPE 11 WHEEL 60-KVL 4140 3/8 3/8CARBO 05539562380 8 X 1-9/16 X 1-1/4 TYPE 11 WHEEL 46-JVL 3105 7/16 25/32

FEATURES: •Aluminum oxide abrasive - white. •Excellent friability. •Performance vitrified bond. •V40P bond; induced porosity. BENEFITS: •Fast stock removal for light to medium stock removal operations. •Cool cutting action. •Long wheel life. •Load resistant. AA is ideal for grinding heat sensitive steels, as well as easy- and medium-to-grind high speed steels and cast, alloy steels. Use V40 bond for general purpose applications or medium contact areas. Use V40P bond on wide contact areas where heat is an issue.

CARBO 05539509882 6 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-JV40 4140PartNo Description Grading Max.

RPM

CARBO 05539561274 6 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-KV40 4140CARBO 05539562175 7 X 1/8 X 1-1/4 TYPE 1 WHEEL AA100-KV40 3600CARBO 05539509875 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA60-JV40 3600CARBO 05539509874 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA60-KV40 3600CARBO 05539509871 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA80-KV40 3600CARBO 05539509870 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA100-IV40 3600CARBO 05539509869 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA100-JV40 3600CARBO 05539527714 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA100-KV40 3600CARBO 05539562176 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA120-JV40 3600CARBO 05539509866 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA150-KV40 3600CARBO 05539562177 7 X 1/4 X 1-1/4 TYPE 1 WHEEL AA150-LV40 3600CARBO 05539509865 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HV40 3600CARBO 05539507039 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HV40P 3600CARBO 05539509864 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-IV40 3600CARBO 05539509863 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-JV40 3600CARBO 05539509862 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-KV40 3600CARBO 05539509860 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-IV40 3600CARBO 05539509859 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-JV40 3600CARBO 05539509858 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-KV40 3600CARBO 05539509857 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA80-IV40 3600CARBO 05539509856 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA80-JV40 3600CARBO 05539509854 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA80-KV40 3600CARBO 05539509852 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA100-IV40 3600CARBO 05539509850 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA100-JV40 3600CARBO 05539562180 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA120-KV40 3600CARBO 05539509848 7 X 3/4 X 1-1/4 TYPE 1 WHEEL AA60-IV40 3600CARBO 05539562188 8 X 1/4 X 1-1/4 TYPE 1 WHEEL AA80-JV40 3600CARBO 05539509844 8 X 1/4 X 1-1/4 TYPE 1 WHEEL AA100-KV40 3600CARBO 05539501897 8 X 1/4 X 1-1/4 TYPE 1 WHEEL AA100-KV40 3600CARBO 05539509841 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HV40 3105CARBO 05539505740 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HV40P 3600CARBO 05539509840 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-IV40 3105CARBO 05539509839 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-JV40 3600CARBO 05539509838 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-KV40 3600CARBO 05539509836 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-IV40 3600CARBO 05539562190 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-JV40 3600CARBO 05539527716 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA80-JV40 3600CARBO 05539509831 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA80-KV40 3600CARBO 05539509827 8 X 3/4 X 1-1/4 TYPE 1 WHEEL AA46-JV40 3600

Phone: 402-455-6151Toll Free: 800-488-9699

74

Wheels, Toolroom Ceramic Alumina For Surface Grinders

For Tool & Cutter Grinders

Aluminum Oxide, AA For Surface, Cylindrical and Tool & Cutter Grinders

Abrasives & Brushes

AbrasivesWheels, Toolroom

CARBO 05539562193 8 X 1 X 1-1/4 TYPE 1 WHEEL AA46-IV40 3150PartNo Description Grading Max.

RPM

CARBO 05539509814 10 X 1 X 3 TYPE 1 WHEEL AA46-JV40 2485CARBO 05539509810 12 X 1 X 3 TYPE 1 WHEEL AA46-JV40 2070CARBO 05539501900 12 X 1 X 5 TYPE 1 WHEEL AA46-IV40 2070CARBO 05539562163 12 X 1 X 5 TYPE 1 WHEEL AA60-IV40 2070CARBO 05539509807 12 X 1 X 5 TYPE 1 WHEEL AA60-JV40 2070CARBO 05539562166 12 X 2 X 5 TYPE 1 WHEEL AA46-HV40 2070CARBO 05539509806 14 X 1 X 5 TYPE 1 WHEEL AA46-JV40 1800CARBO 05539562170 14 X 1 X 5 TYPE 1 WHEEL AA80-KV40 1800CARBO 05539562171 14 X 1-1/2 X 5 TYPE 1 WHEEL AA46-GV40P 1800CARBO 05539562172 14 X 1-1/2 X 5 TYPE 1 WHEEL AA46-IV40 1800CARBO 05539509804 14 X 1-1/2 X 5 TYPE 1 WHEEL AA46-JV40 1800CARBO 05539509803 14 X 1-1/2 X 5 TYPE 1 WHEEL AA60-JV40 1800CARBO 05539503517 9 X 2 X 5 TYPE 2 WHEEL AA70-JV40P 2546


CARBO 05539509798 7 X 2 X 1-1/4 TYPE 5 WHEEL AA46-IV40 3600PartNo Description Grading Max.

RPM

CARBO 05539509796 7 X 1 X 1-1/4 TYPE 5 WHEEL AA60-IV40 3600CARBO 05539562196 8 X 1 X 1-1/4 TYPE 5 WHEEL AA46-HV40P 3600CARBO 05539562195 14 X 1-1/2 X 5 TYPE 5 WHEEL AA46-HV40 1800


CARBO 05539509793 4 X 2 X .787 TYPE 6 WHEEL AA80-JV40 5730 3/8 3/8PartNo Description Grading Max.

RPMRim Back

CARBO 05539509792 6 X 1-1/2 X 1-1/4 TYPE 6 WHEEL AA60-JV40 3820 1-1/2 1/2CARBO 05539509790 4 / 3 X 1-1/2 X 1-1/4 TYPE 11

WHEELAA46-KV40 5730 1/4 1/2

CARBO 05539509788 4 / 3 X 1-1/2 X 1-1/4 TYPE 11WHEEL

AA60-KV40 5730 1/4 1/2CARBO 05539509783 5 / 3-3/4 X 1-3/4 X 1-1/4 TYPE 11

WHEELAA60-JV40 4585 1/4 1/2


AA60-KV40 4585 1/4 1/2CARBO 05539509781 6 / 4-1/2 X 2 X 1-1/4 TYPE 11

WHEELAA46-KV40 4585 3/8 1/2

CARBO 05539509777 6 X 1/2 X 1-1/4 TYPE 12 WHEEL AA60-JV40 4140 3/8 5/16PartNo Description Grading Max.

RPMRim Back

FEATURES: •Purple ceramic Medalist R abrasive with VPP porous bond. •Controlled porosity bond. •Durable bond post. •Maximum depth of cut. BENEFITS: •Maximum productivity; lowest total grinding costs. •Increased chip clearance and maximum coolant flow. •Reduced loading. •Cool cutting - wet or dry - in heat sensitive applications. •Maximum grain retention. •Less dressing; longer wheel life. •Increased grain efficiency; consistent grinding action at high metal removal rates. High porosity for heavy stock removal.

CARBO 05539564478 7 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR46-GVPP 3600PartNo Description Grading Max.

RPM

CARBO 05539564481 7 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR46-HVPP 3600CARBO 05539564482 7 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR60-GVPP 3600CARBO 05539564483 7 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR60-HVPP 3600CARBO 05539564497 8 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR46-GVPP 3105CARBO 05539564503 8 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR46-HVPP 3105CARBO 05539564509 8 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR60-GVPP 3105CARBO 05539564515 8 X 1/2 X 1-1/4 TYPE 1 WHEEL MEDALISTR60-HVPP 3600CARBO 05539564499 12 X 1 X 3 TYPE 1 WHEEL MEDALISTR46-GVPP 2710CARBO 05539564505 12 X 1 X 3 TYPE 1 WHEEL MEDALISTR46-HVPP 2710CARBO 05539564511 12 X 1 X 3 TYPE 1 WHEEL MEDALISTR60-GVPP 2710CARBO 05539564517 12 X 1 X 3 TYPE 1 WHEEL MEDALISTR60-HVPP 2710CARBO 05539564493 7 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR46-GVPP 3600CARBO 05539564494 7 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR46-HVPP 3600CARBO 05539564495 7 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR60-GVPP 3600CARBO 05539564496 7 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR60-HVPP 3600CARBO 05539564498 8 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR46-GVPP 3105CARBO 05539564504 8 X 1 X 1-1/4 R TYPE 5 WHEEL MEDALISTR46-HVPP 3105CARBO 05539564510 8 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR60-GVPP 3105CARBO 05539564516 8 X 1 X 1-1/4 TYPE 5 WHEEL MEDALISTR60-HVPP 3600CARBO 05539564500 12 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR46-GVPP 2710CARBO 05539564506 12 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR46-HVPP 2710CARBO 05539564512 12 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR60-GVPP 2710CARBO 05539564518 12 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR60-HVPP 2710CARBO 05539564502 14 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR46-GVPP 2320CARBO 05539564508 14 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR46-HVPP 2320CARBO 05539564514 14 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR60-GVPP 2320CARBO 05539564520 14 X 1-1/2 X 5 TYPE 5 WHEEL MEDALISTR60-HVPP 2320CARBO 05539564501 12 X 2 X 5 TYPE 7 WHEEL MEDALISTR46-GVPP 2320CARBO 05539564507 12 X 2 X 5 TYPE 7 WHEEL MEDALISTR46-HVPP 2710CARBO 05539564513 12 X 2 X 5 TYPE 7 WHEEL MEDALISTR60-GVPP 2710CARBO 05539564519 12 X 2 X 5 TYPE 7 WHEEL MEDALISTR60-HVPP 2710

Phone: 402-455-6151Toll Free: 800-488-9699

75


Aluminum Oxide, AA For Surface, Cylindrical and Tool & Cutter Grinders

For Surface Grinders

For Tool & Cutter Grinders

Carbo Cool Medalist R Ceramic

Alumina

For Heavy Stock Removal

Abras

ives &

Brus

hes


FEATURES: •Ruby; durable aluminum oxide abrasive with VPP porous bond. •Controlled porosity bond. •Durable bond post.

BENEFITS: •Extremely cool cutting. •Good form holding. •Increased chip clearance and maximum coolant flow. •Reduced loading. •Cool cutting - wet or dry - in heat sensitive applications. •Maximum grain retention. •Less dressing; longer wheel life. Engineered for medium to heavy stock removal.

CARBO 05539564480 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AR46-GVPP 3600PartNo Description Grading Max.

RPM

CARBO 05539564484 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AR46-HVPP 3600CARBO 05539564485 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AR60-GVPP 3600CARBO 05539564486 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AR60-HVPP 3600CARBO 05539564523 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AR46-GVPP 3105CARBO 05539564530 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AR46-HVPP 3105CARBO 05539564537 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AR60-GVPP 3105CARBO 05539564546 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AR60-HVPP 3600CARBO 05539564525 12 X 1 X 3 TYPE 1 WHEEL AR46-GVPP 2710CARBO 05539564532 12 X 1 X 3 TYPE 1 WHEEL AR46-HVPP 2710CARBO 05539564539 12 X 1 X 3 TYPE 1 WHEEL AR60-GVPP 2710CARBO 05539564548 12 X 1 X 3 TYPE 1 WHEEL AR60-HVPP 2710CARBO 05539564522 7 X 1 X 1-1/4 TYPE 5 WHEEL AR46-GVPP 3600CARBO 05539564529 7 X 1 X 1-1/4 TYPE 5 WHEEL AR46-HVPP 3600CARBO 05539564536 7 X 1 X 1-1/4 TYPE 5 WHEEL AR60-GVPP 3600CARBO 05539564545 7 X 1 X 1-1/4 TYPE 5 WHEEL AR60-HVPP 3600CARBO 05539564524 8 X 1 X 1-1/4 TYPE 5 WHEEL AR46-GVPP 3105CARBO 05539564531 8 X 1 X 1-1/4 R TYPE 5 WHEEL AR46-HVPP 3105CARBO 05539564538 8 X 1 X 1-1/4 TYPE 5 WHEEL AR60-GVPP 3105CARBO 05539564547 8 X 1 X 1-1/4 TYPE 5 WHEEL AR60-HVPP 3600CARBO 05539564526 12 X 1-1/2 X 5 TYPE 1 WHEEL AR46-GVPP 2710CARBO 05539564533 12 X 1-1/2 X 5 TYPE 5 WHEEL AR46-HVPP 2710CARBO 05539564541 12 X 1-1/2 X 5 TYPE 5 WHEEL AR60-GVPP 2710CARBO 05539564549 12 X 1-1/2 X 5 TYPE 5 WHEEL AR60-HVPP 2710CARBO 05539564528 14 X 1-1/2 X 5 TYPE 5 WHEEL AR46-GVPP 2320CARBO 05539564535 14 X 1-1/2 X 5 TYPE 5 WHEEL AR46-HVPP 2320CARBO 05539564544 14 X 1-1/2 X 5 TYPE 5 WHEEL AR60-GVPP 2320CARBO 05539564551 14 X 1-1/2 X 5 TYPE 5 WHEEL AR60-HVPP 2320CARBO 05539564527 12 X 2 X 5 TYPE 7 WHEEL AR46-GVPP 2710CARBO 05539564534 12 X 2 X 5 TYPE 7 WHEEL AR46-HVPP 2710CARBO 05539564542 12 X 2 X 5 TYPE 7 WHEEL AR60-GVPP 2710CARBO 05539564550 12 X 2 X 5 TYPE 7 WHEEL AR60-HVPP 2710

FEATURES: •Pink, friable aluminum oxide abrasive with VPP porous bond. •Controlled porosity bond. •Durable bond post.

BENEFITS: •Designed to grind a broad variety of steels at light to moderate feed rates. •Increased chip clearance and maximum coolant flow. •Reduced loading. •Cool cutting - wet or dry - in heat sensitive applications. •Maximum grain retention. •Less dressing; longer wheel life. Excels in light to medium stock removal applications.

CARBO 05539564477 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AP46-GVPP 3600PartNo Description Grading Max.

RPM

CARBO 05539564490 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AP46-HVPP 3600CARBO 05539564491 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AP60-GVPP 3600CARBO 05539564492 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AP60-HVPP 3600CARBO 05539564554 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AP46-GVPP 3105CARBO 05539564562 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AP46-HVPP 3105CARBO 05539564569 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AP60-GVPP 3105CARBO 05539564576 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AP60-HVPP 3600CARBO 05539564557 12 X 1 X 3 TYPE 1 WHEEL AP46-GVPP 2710CARBO 05539564564 12 X 1 X 3 TYPE 1 WHEEL AP46-HVPP 2710CARBO 05539564571 12 X 1 X 3 TYPE 1 WHEEL AP60-GVPP 2710CARBO 05539564552 7 X 1 X 1-1/4 TYPE 5 WHEEL AP46-GVPP 3600CARBO 05539564561 7 X 1 X 1-1/4 TYPE 5 WHEEL AP46-HVPP 3600CARBO 05539564568 7 X 1 X 1-1/4 TYPE 5 WHEEL AP60-GVPP 3600CARBO 05539564575 7 X 1 X 1-1/4 TYPE 5 WHEEL AP60-HVPP 3600CARBO 05539564556 8 X 1 X 1-1/4 TYPE 5 WHEEL AP46-GVPP 3105CARBO 05539564563 8 X 1 X 1-1/4 R TYPE 5 WHEEL AP46-HVPP 3105CARBO 05539564570 8 X 1 X 1-1/4 TYPE 5 WHEEL AP60-GVPP 3105CARBO 05539564578 8 X 1 X 1-1/4 TYPE 5 WHEEL AP60-HVPP 3600CARBO 05539564558 12 X 1-1/2 X 5 TYPE 5 WHEEL AP46-GVPP 2710CARBO 05539564565 12 X 1-1/2 X 5 TYPE 5 WHEEL AP46-HVPP 2710CARBO 05539564572 12 X 1-1/2 X 5 TYPE 5 WHEEL AP60-GVPP 2710CARBO 05539564579 12 X 1-1/2 X 5 TYPE 5 WHEEL AP60-HVPP 2710CARBO 05539564560 14 X 1-1/2 X 5 TYPE 5 WHEEL AP46-GVPP 2320CARBO 05539564567 14 X 1-1/2 X 5 TYPE 5 WHEEL AP46-HVPP 2320CARBO 05539564574 14 X 1-1/2 X 5 TYPE 5 WHEEL AP60-GVPP 2320CARBO 05539564581 14 X 1-1/2 X 5 TYPE 5 WHEEL AP60-HVPP 2320CARBO 05539564559 12 X 2 X 5 TYPE 7 WHEEL AP46-GVPP 2710CARBO 05539564566 12 X 2 X 5 TYPE 7 WHEEL AP46-HVPP 2710CARBO 05539564573 12 X 2 X 5 TYPE 7 WHEEL AP60-GVPP 2710CARBO 05539564580 12 X 2 X 5 TYPE 7 WHEEL AP60-HVPP 2710

Phone: 402-455-6151Toll Free: 800-488-9699

76

Log-on to www.johnday.com For Pricing and Product Information

Carbo Cool Gold AR Aluminum Oxide For Medium/Heavy Stock Removal

Carbo Cool Gold PA Aluminum Oxide For Light/Medium Stock Removal

Abrasives & Brushes


FEATURES: •White, most griable aluminum oxide abrasive with VPP porous bond. •Versatile. •Controlled porosity bond. •Durable bond post. BENEFITS: •Exceptionally cool cutting in light pressure grinding applications, or where burn is a concern. •Ideal for use across a broad variety of tool steels. •Increased chip clearance and maximum coolant flow. •Reduced loading. •Cool cutting - wet or dry - in heat sensitive applications. •Maximum grain retention. •Less dressing; longer wheel life. Excellent for light stock removal applications.

CARBO 05539564479 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-GVPP 3600PartNo Description Grading Max.

RPM

CARBO 05539564487 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HVPP 3600CARBO 05539564488 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-GVPP 3600CARBO 05539564489 7 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-HVPP 3600CARBO 05539564592 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-GVPP 3105CARBO 05539564599 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA46-HVPP 3105CARBO 05539564606 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-GVPP 3105CARBO 05539564613 8 X 1/2 X 1-1/4 TYPE 1 WHEEL AA60-HVPP 3600CARBO 05539564594 12 X 1 X 3 TYPE 1 WHEEL AA46-GVPP 2710CARBO 05539564601 12 X 1 X 3 TYPE 1 WHEEL AA46-HVPP 2710CARBO 05539564608 12 X 1 X 3 TYPE 1 WHEEL AA60-GVPP 2710CARBO 05539564615 12 X 1 X 3 TYPE 1 WHEEL AA60-HVPP 2710CARBO 05539564591 7 X 1 X 1-1/4 TYPE 5 WHEEL AA46-GVPP 3600CARBO 05539564598 7 X 1 X 1-1/4 TYPE 5 WHEEL AA46-HVPP 3600CARBO 05539564605 7 X 1 X 1-1/4 TYPE 5 WHEEL AA60-GVPP 3600CARBO 05539564612 7 X 1 X 1-1/4 TYPE 5 WHEEL AA60-HVPP 3600CARBO 05539564593 8 X 1 X 1-1/4 TYPE 5 WHEEL AA46-GVPP 3105CARBO 05539564600 8 X 1 X 1-1/4 R TYPE 5 WHEEL AA46-HVPP 3105CARBO 05539564607 8 X 1 X 1-1/4 TYPE 5 WHEEL AA60-GVPP 3105CARBO 05539564614 8 X 1 X 1-1/4 TYPE 5 WHEEL AA60-HVPP 3600CARBO 05539564595 12 X 1-1/2 X 5 TYPE 5 WHEEL AA46-GVPP 2710CARBO 05539564602 12 X 1-1/2 X 5 TYPE 5 WHEEL AA46-HVPP 2710CARBO 05539564609 12 X 1-1/2 X 5 TYPE 5 WHEEL AA60-GVPP 2710CARBO 05539564616 12 X 1-1/2 X 5 TYPE 5 WHEEL AA60-HVPP 2710CARBO 05539564597 14 X 1-1/2 X 5 TYPE 5 WHEEL AA46-GVPP 2320CARBO 05539564604 14 X 1-1/2 X 5 TYPE 5 WHEEL AA46-HVPP 2320CARBO 05539564611 14 X 1-1/2 X 5 TYPE 5 WHEEL AA60-GVPP 2320CARBO 05539564618 14 X 1-1/2 X 5 TYPE 5 WHEEL AA60-HVPP 2320CARBO 05539564596 12 X 2 X 5 TYPE 7 WHEEL AA46-GVPP 2710CARBO 05539564603 12 X 2 X 5 TYPE 7 WHEEL AA46-HVPP 2710CARBO 05539564610 12 X 2 X 5 TYPE 7 WHEEL AA60-GVPP 2710CARBO 05539564617 12 X 2 X 5 TYPE 7 WHEEL AA60-HVPP 2710

FEATURES: •High performance, sharp, silicon carbide abrasive - green. •Performance vitrified bond. BENEFITS: •Fast stock removal. •Cool, free cut. •Long life. GC abrasive is used for grinding hard cemented carbide tooling and non-ferrous materials.

CARBO 05539509586 6 X 1/2 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 4140PartNo Description Grading Max.

RPM

CARBO 05539509585 6 X 1/2 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 4140CARBO 05539509582 6 X 1/2 X 1-1/4 TYPE 1 WHEEL GC120-IVGC 4140CARBO 05539509581 6 X 3/4 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 4140CARBO 05539509580 6 X 3/4 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 4140CARBO 05539509579 6 X 3/4 X 1-1/4 TYPE 1 WHEEL GC100-IVGC 4140CARBO 05539509578 6 X 3/4 X 1-1/4 TYPE 1 WHEEL GC120-IVGC 4140CARBO 05539509576 7 X 1/2 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 3600CARBO 05539509575 7 X 1/2 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 3600CARBO 05539562390 7 X 1/2 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 3600CARBO 05539509574 7 X 1/2 X 1-1/4 TYPE 1 WHEEL GC100-IVGC 3600CARBO 05539509573 7 X 1/2 X 1-1/4 TYPE 1 WHEEL GC120-IVGC 3600CARBO 05539562391 7 X 3/4 X 5/8 TYPE 1 WHEEL GC60-IVGC 3600CARBO 05539562392 7 X 3/4 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 3600CARBO 05539562393 7 X 1 X 1-1/4 TYPE 1 WHEEL GC120-IVGC 3600CARBO 05539509572 8 X 1/2 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 3600CARBO 05539562395 8 X 1/2 X 1-1/4 TYPE 1 WHEEL GC100-IVGC 3600CARBO 05539509570 8 X 3/4 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 3600CARBO 05539562397 8 X 1 X 1-1/4 TYPE 1 WHEEL GC60-IVGC 3600CARBO 05539562398 8 X 1 X 1-1/4 TYPE 1 WHEEL GC80-IVGC 3600CARBO 05539562386 14 X 1 X 5 TYPE 1 WHEEL GC60-IVGC 1800CARBO 05539562388 14 X 2 X 5 TYPE 1 WHEEL GC80-IVGC 1800

FEATURES: •Aluminum oxide abrasive - gray. •Vitrified bond. BENEFITS: •Fast cut rate. •Free cutting action; long life. Ideal for removing burrs on steel parts, as well as sharpening high speed steel cutting tools. Note: Bushings included.

CARBO 05539518985 5 X 1 X 1 TYPE 1 WHEEL 60-M 4970PartNo Description Grading Max.

RPM

CARBO 05539509979 6 X 1/2 X 1 TYPE 1 WHEEL 36-M 4140CARBO 05539509978 6 X 1/2 X 1 TYPE 1 WHEEL 60-M 4140CARBO 05539509977 6 X 1/2 X 1 TYPE 1 WHEEL 100-K 4140CARBO 05539509976 6 X 3/4 X 1 TYPE 1 WHEEL 36-M 4140CARBO 05539509975 6 X 3/4 X 1 TYPE 1 WHEEL 60-M 4140CARBO 05539509974 6 X 3/4 X 1 TYPE 1 WHEEL 100-K 4140CARBO 05539509973 6 X 1 X 1 TYPE 1 WHEEL 36-M 4140

Wheels, Bench and Pedestal

Phone: 402-455-6151Toll Free: 800-488-9699

77

Carbo Cool Gold AA Aluminum Oxide For Light Stock Removal

GC Silicon Carbide For Carbide Grinding

Aluminum Oxide For Steel/Metal

Abras

ives &

Brus

hes

Abrasives

CARBO 05539509972 6 X 1 X 1 TYPE 1 WHEEL 60-M 4140PartNo Description Grading Max.

RPM

CARBO 05539509971 6 X 1 X 1 TYPE 1 WHEEL 100-K 4140CARBO 05539509968 7 X 3/4 X 1 TYPE 1 WHEEL 60-M 3600CARBO 05539509967 7 X 3/4 X 1 TYPE 1 WHEEL 100-K 3600CARBO 05539509966 7 X 1 X 1 TYPE 1 WHEEL 36-M 3600CARBO 05539509965 7 X 1 X 1 TYPE 1 WHEEL 60-M 3600CARBO 05539509964 7 X 1 X 1 TYPE 1 WHEEL 100-K 3600CARBO 05539509962 8 X 3/4 X 1 TYPE 1 WHEEL 36-M 3600CARBO 05539509961 8 X 3/4 X 1 TYPE 1 WHEEL 60-M 3600CARBO 05539509960 8 X 1 X 1 TYPE 1 WHEEL 24-P 3600CARBO 05539509959 8 X 1 X 1 TYPE 1 WHEEL 36-M 3600CARBO 05539509956 8 X 1 X 1 TYPE 1 WHEEL 60-M 3600CARBO 05539509955 10 X 1 X 1-1/4 TYPE 1 WHEEL 24-P 2485CARBO 05539509953 10 X 1 X 1-1/4 TYPE 1 WHEEL 36-M 2485CARBO 05539509952 10 X 1 X 1-1/4 TYPE 1 WHEEL 60-M 2485CARBO 05539509950 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 36-M 2485CARBO 05539509948 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 24-P 2485CARBO 05539509947 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 36-M 2485CARBO 05539509941 12 X 1-1/2 X 1-1/2 TYPE 1 WHEEL 36-M 2070CARBO 05539509939 12 X 2 X 1-1/2 TYPE 1 WHEEL 24-P 2070CARBO 05539509938 12 X 2 X 1-1/2 TYPE 1 WHEEL 36-M 2070CARBO 05539509937 12 X 2 X 1-1/2 TYPE 1 WHEEL 60-M 2070CARBO 05539509935 12 X 2 X 1-1/2 TYPE 1 WHEEL 24-M 1800CARBO 05539509934 12 X 2 X 1-1/2 TYPE 1 WHEEL 36-M 1800

FEATURES: •Silicon carbide abrasive - dark green. •Vitrified bond. BENEFITS: •Fast cut rate. •Free cutting action; long life. Ideal for sharpening carbide-tipped cutting tools. Note: Bushings included.

CARBO 05539509929 6 X 3/4 X 1 TYPE 1 WHEEL 60-I 4140PartNo Description Grading Max.

RPM

CARBO 05539509928 6 X 3/4 X 1 TYPE 1 WHEEL 80-I 4140CARBO 05539509927 6 X 3/4 X 1 TYPE 1 WHEEL 120-I 4140CARBO 05539509926 6 X 1 X 1 TYPE 1 WHEEL 60-I 4140CARBO 05539509925 6 X 1 X 1 TYPE 1 WHEEL 80-I 4140CARBO 05539509924 6 X 1 X 1 TYPE 1 WHEEL 120-I 4140CARBO 05539501937 7 X 3/4 X 1 TYPE 1 WHEEL 80-I 3600CARBO 05539509922 7 X 1 X 1 TYPE 1 WHEEL 80-I 3600CARBO 05539509920 7 X 1 X 1 TYPE 1 WHEEL 120-I 3600CARBO 05539509918 8 X 3/4 X 1 TYPE 1 WHEEL 80-I 3600CARBO 05539509916 8 X 1 X 1 TYPE 1 WHEEL 60-I 3600CARBO 05539509915 8 X 1 X 1 TYPE 1 WHEEL 80-I 3600CARBO 05539509914 8 X 1 X 1 TYPE 1 WHEEL 120-I 3600CARBO 05539509913 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 60-I 2485CARBO 05539509912 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 80-I 2485CARBO 05539509911 10 X 1-1/4 X 1-1/4 TYPE 1 WHEEL 120-I 2485

FEATURES: •High performance ceramic alumina abrasive - blue. •Self-sharpening abrasive. •High performance bond. •Induced porosity. BENEFITS: •Fastest stock removal; maximum productivity. •Cool cutting. •Less burn on part. •Enhanced segment life. •Cool, free cut •Excellent chip and coolant flow. Ideal for high stock removal on flat surfaces. Best for grinding hard materials. Size = width x thickness x height. CARBO 05539507043 5 X 1-1/2 X 6 SEGMENT 30-EVLP NOPartNo Description Grading Type

CARBO 05539562906 5 X 1-1/2 X 6 SEGMENT 30-FVLP NOCARBO 05539507044 5 X 1-1/2 X 6 SEGMENT 30-GVLP NOCARBO 05539507047 11-1/4 X 2-1/4 X 6 SEGMENT 30-EVLP CDCARBO 05539562907 11-1/4 X 2-1/4 X 6 SEGMENT 30-FVLP CDCARBO 05539507048 11-1/4 X 2-1/4 X 6 SEGMENT 30-GVLP CDCARBO 05539505202 11-1/4 X 2-1/4 X 6 SEGMENT 30-GVLP CD

FEATURES: •Performance aluminum oxide abrasive - pink. •Premium vitrified bond. •Induced porosity. BENEFITS: •Fast, cool cutting action. •Long life. •Cool, free cut. Engineered for high stock removal on flat surfaces. Very versatile; works well on mild steels. CARBO 05539562910 5 X 1-1/2 X 6 SEGMENT RA30-GV40P NOPartNo Description Grading Type

CARBO 05539562911 5 X 1-1/2 X 6 SEGMENT RA30-FV40P NOCARBO 05539562912 11-1/4 X 2-1/4 X 6 SEGMENT RA24-EV40P CDCARBO 05539562913 11-1/4 X 2-1/4 X 6 SEGMENT RA24-GV40P CDCARBO 05539562914 11-1/4 X 2-1/4 X 6 SEGMENT RA30-EV40P CDCARBO 05539562915 11-1/4 X 2-1/4 X 6 SEGMENT RA30-GV40P CDCARBO 05539562916 11-1/4 X 2-1/4 X 6 SEGMENT RA24-GV40P CDCARBO 05539564417 11-1/4 X 3 X 8 SEGMENT RA24-EV40P CDCARBO 05539564414 11-1/4 X 3 X 8 SEGMENT RA24-GV40P CDCARBO 05539564415 11-1/4 X 3 X 8 SEGMENT RA30-EV40P CD

FEATURES: •Excellent value aluminum oxide abrasive blend - gray/pink. •Advanced vitrified bond. •Induced porosity. BENEFITS: •Fast, cool cutting action. •Long life. •Cool, free cut. For high stock removal on flat surfaces. Excellent value for general purpose use. CARBO 05539564416 11-1/4 X 3 X 8 SEGMENT 30-F24-F CDPartNo Description Grading Type

Segments, Surface Grinding

Phone: 402-455-6151Toll Free: 800-488-9699

78

Call John Day Company at 800-488-9699 for your

Tool Crib Management and Vending Solutions

Wheels, Bench and Pedestal Aluminum Oxide For Steel/Metal

Silicon Carbide For Carbide/Non-Ferrous Metals

Ceramic Alumina

Red Aluminum Oxide

Gold Aluminum Oxide

Abrasives & Brushes

AbrasivesWheel Markings Guide

Phone: 402-455-6151Toll Free: 800-488-9699

79

Bonded Diamond/CBN

Abras

ives &

Brus

hes

AbrasivesWheels, Bonded Diamond/ CBN

To order wheels-Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration and diamond depth. STADIA 12002 WHL DIA D 3/4,WHL THK T 1/4 1/161/8PartNo Description Diamond Depth X

STADIA 12004 WHL DIA D 3/4,WHL THK T 1/2 1/161/8STADIA 12078 WHL DIA D 3/4,WHL THK T 3/4 1/161/8STADIA 12005 WHL DIA D 1,WHL THK T 1/8 1/161/8STADIA 12006 WHL DIA D 1,WHL THK T 1/4 1/161/8STADIA 12008 WHL DIA D 1,WHL THK T 1/2 1/161/8STADIA 12012 WHL DIA D 1-1/2,WHL THK T 1/4 1/161/8STADIA 12013 WHL DIA D 1-1/2,WHL THK T 3/8 1/161/8STADIA 12064 WHL DIA D 2,WHL THK T 1/8 1/161/81/4STADIA 12015 WHL DIA D 2,WHL THK T 1/4 1/161/81/4STADIA 12014 WHL DIA D 2,WHL THK T 3/8 1/161/81/4STADIA 12017 WHL DIA D 2,WHL THK T 1/2 1/161/81/4STADIA 12021 WHL DIA D 3,WHL THK T 1/32 1/161/8STADIA 12022 WHL DIA D 3,WHL THK T 1/16 1/161/8STADIA 12024 WHL DIA D 3,WHL THK T 1/8 1/161/81/4STADIA 12027 WHL DIA D 3,WHL THK T 1/4 1/161/81/4STADIA 12028 WHL DIA D 3,WHL THK T 3/8 1/161/81/4STADIA 12029 WHL DIA D 3,WHL THK T 1/2 1/161/81/4STADIA 12030 WHL DIA D 4,WHL THK T 1/32 1/161/8STADIA 12031 WHL DIA D 4,WHL THK T 1/16 1/161/8STADIA 12032 WHL DIA D 4,WHL THK T 1/8 1/161/81/4STADIA 12088 WHL DIA D 4,WHL THK T 3/16 1/161/81/4STADIA 12033 WHL DIA D 4,WHL THK T 1/4 1/161/81/4STADIA 12034 WHL DIA D 4,WHL THK T 3/8 1/161/81/4STADIA 12035 WHL DIA D 4,WHL THK T 1/2 1/161/81/4STADIA 12037 WHL DIA D 5,WHL THK T 1/16 1/161/8STADIA 12038 WHL DIA D 5,WHL THK T 1/8 1/161/81/4STADIA 12065 WHL DIA D 5,WHL THK T 3/16 1/161/81/4STADIA 12039 WHL DIA D 5,WHL THK T 1/4 1/161/81/4STADIA 12040 WHL DIA D 5,WHL THK T 1/2 1/161/81/4STADIA 12041 WHL DIA D 6,WHL THK T 1/32 1/161/8STADIA 12043 WHL DIA D 6,WHL THK T 1/16 1/161/8STADIA 12044 WHL DIA D 6,WHL THK T 1/8 1/161/81/4STADIA 12066 WHL DIA D 6,WHL THK T 3/16 1/161/81/4STADIA 12045 WHL DIA D 6,WHL THK T 1/4 1/161/81/4STADIA 12046 WHL DIA D 6,WHL THK T 3/8 1/161/81/4STADIA 12047 WHL DIA D 6,WHL THK T 1/2 1/161/81/4STADIA 12081 WHL DIA D 6,WHL THK T 3/4 1/161/8STADIA 12049 WHL DIA D 7,WHL THK T 1/8 1/161/81/4STADIA 12067 WHL DIA D 7,WHL THK T 3/16 1/161/81/4STADIA 12050 WHL DIA D 7,WHL THK T 1/4 1/161/81/4STADIA 12051 WHL DIA D 7,WHL THK T 3/8 1/161/81/4STADIA 12052 WHL DIA D 7,WHL THK T 1/2 1/161/81/4STADIA 12068 WHL DIA D 8,WHL THK T 3/16 1/161/81/4STADIA 12055 WHL DIA D 8,WHL THK T 1/4 1/161/81/4STADIA 12069 WHL DIA D 8,WHL THK T 3/8 1/161/81/4STADIA 12056 WHL DIA D 8,WHL THK T 1/2 1/161/81/4STADIA 12057 WHL DIA D 10,WHL THK T 1/4 1/161/81/4STADIA 12058 WHL DIA D 10,WHL THK T 3/8 1/161/81/4STADIA 12059 WHL DIA D 10,WHL THK T 1/2 1/161/81/4STADIA 12070 WHL DIA D 10,WHL THK T 3/4 1/161/81/4STADIA 12098 WHL DIA D 10,WHL THK T 1 1/161/81/4STADIA 12061 WHL DIA D 12,WHL THK T 1/2 1/161/81/4STADIA 12071 WHL DIA D 12,WHL THK T 3/4 1/161/81/4STADIA 12099 WHL DIA D 12,WHL THK T 1 1/161/81/4STADIA 12062 WHL DIA D 14,WHL THK T 3/8 1/161/81/4STADIA 12063 WHL DIA D 14,WHL THK T 1/2 1/161/81/4STADIA 12087 WHL DIA D 14,WHL THK T 3/4 1/161/81/4STADIA 12100 WHL DIA D 14,WHL THK T 1 1/161/81/4STADIA 12089 WHL DIA D 16,WHL THK T 1/2 1/161/8STADIA 12090 WHL DIA D 16,WHL THK T 3/4 1/161/8STADIA 12091 WHL DIA D 16,WHL THK T 1 1/161/8STADIA 12092 WHL DIA D 18,WHL THK T 1/2 1/161/8STADIA 12093 WHL DIA D 18,WHL THK T 3/4 1/161/8STADIA 12094 WHL DIA D 18,WHL THK T 1 1/161/8STADIA 12095 WHL DIA D 20,WHL THK T 1/2 1/161/8STADIA 12096 WHL DIA D 20,WHL THK T 3/4 1/161/8STADIA 12097 WHL DIA D 20,WHL THK T 1 1/161/8

STADIA 12104 WHL DIA D 24,WHL THK T 3/4 1/8PartNo Description Diamond Depth X

STADIA 12103 WHL DIA D 24,WHL THK T 1 1/8

To order wheels-Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration and diamond depth. Wheel diameter - D = 6. Wheel thick - T = 1. Back thickness - E = 1/2. Diamond depth - X = 1/161/8.

STADIA 91901 FOR HAGER MODEL B 1/4

PartNo Description RimWidth

W

STADIA 91902 FOR HAGER MODEL B 3/8STADIA 91903 FOR HAGER MODEL B 1/2STADIA 91904 FOR HAGER MODEL C & D 1/4STADIA 91905 FOR HAGER MODEL C & D 3/8STADIA 91906 FOR HAGER MODEL C & D 1/2

To order wheels-Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration and diamond depth.

STADIA 115001 BACK ANGLE S 70°,DIA DPTH X1/161/8

3 1-1/4 1/2 2-1/32 3/8

PartNo Description WheelDia. D.

WheelThick

TBack

Thickness E

InsideFlat K

InsertLength

U

STADIA 115002 BACK ANGLE S 70°,DIA DPTH X1/161/8

3-3/4 1-1/2 3/8 25/16 3/8STADIA 115003 BACK ANGLE S 70°,DIA DPTH X

1/161/85 1-3/4 7/16 3-1/4 7/16

To order wheels-Specify the wheel type and number, hole diameter, grit size, grade, bond type, diamond concentration and diamond depth.

STADIA 121007 DIAMOND DEPTH X 1/161/8 3 1/2 1/4 5/16 1-1/4 28°

PartNo Description WheelDia. D.

WheelThick

TRim

WidthW

BackThickness

EInsideFlat K

DishAngle

B

STADIA 121001 DIAMOND DEPTH X 1/161/8 3 7/8 1/8 3/8 1-3/8 45°STADIA 121002 DIAMOND DEPTH X 1/161/8 3 7/8 1/4 3/8 1-3/8 45°STADIA 121006 DIAMOND DEPTH X 1/161/8 3 7/8 3/8 3/8 1-3/8 45°STADIA 121008 DIAMOND DEPTH X 1/161/8 4 1/2 1/4 5/16 2-1/4 27°STADIA 121009 DIAMOND DEPTH X 1/161/8 4 1/2 3/8 5/16 2 22°STADIA 121033 DIAMOND DEPTH X 1/161/8 6 1 3/16 1/2 2-5/8 30°STADIA 121004 DIAMOND DEPTH X 1/161/8 6 1 1/4 1/2 2-5/8 30°STADIA 121005 DIAMOND DEPTH X 1/161/8 6 1 3/8 1/2 2-5/8

Phone: 402-455-6151Toll Free: 800-488-9699

8030°

Type 1 A 1 Straight – Diamond in Periphery

Type 9 A 3 H Double Cup – With Bolt Holes Diamond in Rim

Type 1 1 V 9 Flaring Cup - Diamond in Periphery

Type 1 2 A 2 Dish – Diamond in Rim

Abrasives & Brushes

AbrasivesPoints, General Purpose Mounted

Phone: 402-455-6151Toll Free: 800-488-9699

81

Diamond Dressing Tool Guide

Abras

ives &

Brus

hes

AbrasivesPoints, General Purpose Mounted

Phone: 402-455-6151Toll Free: 800-488-9699

82

Diamond Dressing Tool Guide

Abrasives & Brushes

Abrasives

Phone: 402-455-6151Toll Free: 800-488-9699

83

Mounted Point Selection Guide

Abras

ives &

Brus

hes

Abrasives

The colors are an indication of the wheels relative hardness. "A" shapes are mounted on 1/4" x 1 1/2" shanks. "B" shapes are mounted on 1/8" x 1 1/2" shanks. MOD 691019-00005 A1 GP MOUNTED POINTPartNo Description

MOD 691019-00020 A2 GP MOUNTED POINTMOD 691019-00035 A13 GP MOUNTED POINTMOD 691019-00050 A4 GP MOUNTED POINTMOD 691019-00065 A5 GP MOUNTED POINTMOD 691019-00080 A6 GP MOUNTED POINTMOD 691019-00096 A11 GP MOUNTED POINTMOD 691019-00110 A12 GP MOUNTED POINTMOD 691019-00125 A13 GP MOUNTED POINTMOD 691019-00140 A14 GP MOUNTED POINTMOD 691019-00155 A15 GP MOUNTED POINTMOD 691019-00170 A21 GP MOUNTED POINTMOD 691019-00185 A22 GP MOUNTED POINTMOD 691019-00200 A23 GP MOUNTED POINTMOD 691019-00215 A24 GP MOUNTED POINTMOD 691019-00230 A25 GP MOUNTED POINTMOD 691019-00245 A26 GP MOUNTED POINTMOD 691019-00260 A31 GP MOUNTED POINTMOD 691019-00275 A32 GP MOUNTED POINTMOD 691019-00290 A33 GP MOUNTED POINTMOD 691019-00305 A34 GP MOUNTED POINTMOD 691019-00320 A35 GP MOUNTED POINTMOD 691019-00335 A36 GP MOUNTED POINTMOD 691019-00350 A37 GP MOUNTED POINTMOD 691019-00365 A38 GP MOUNTED POINTMOD 691019-00380 A39 GP MOUNTED POINTMOD 691019-00395 A40 GP MOUNTED POINTMOD 691019-00410 B41 GP MOUNTED POINTMOD 691019-00425 B42 GP MOUNTED POINTMOD 691019-00440 B43 GP MOUNTED POINTMOD 691019-00455 B44 GP MOUNTED POINTMOD 691019-00470 B45 GP MOUNTED POINTMOD 691019-00485 B46 GP MOUNTED POINTMOD 691019-00500 B47 GP MOUNTED POINTMOD 691019-00515 B51 GP MOUNTED POINTMOD 691019-00530 B52 GP MOUNTED POINTMOD 691019-00545 B53 GP MOUNTED POINTMOD 691019-00560 B54 GP MOUNTED POINTMOD 691019-00575 B55 GP MOUNTED POINTMOD 691019-00590 B61 GP MOUNTED POINTMOD 691019-00605 B62 GP MOUNTED POINTMOD 691019-00620 B63 GP MOUNTED POINTMOD 691019-00635 B64 GP MOUNTED POINTMOD 691019-00650 B65 GP MOUNTED POINTMOD 691019-00665 B70 GP MOUNTED POINTMOD 691019-00680 B71 GP MOUNTED POINTMOD 691019-00695 B72 GP MOUNTED POINTMOD 691019-00710 B73 GP MOUNTED POINTMOD 691019-00725 B74 GP MOUNTED POINTMOD 691019-00740 B81 GP MOUNTED POINTMOD 691019-00755 B82 GP MOUNTED POINTMOD 691019-00770 B83 GP MOUNTED POINTMOD 691019-00785 B84 GP MOUNTED POINTMOD 691019-00800 B90 GP MOUNTED POINTMOD 691019-00815 B91 GP MOUNTED POINTMOD 691019-00830 B92 GP MOUNTED POINTMOD 691019-00845 B93 GP MOUNTED POINTMOD 691019-00860 B94GP MOUNTED POINTMOD 691019-00875 B95 GP MOUNTED POINTMOD 691019-00890 B96 GP MOUNTED POINTMOD 691019-00905 B97 GP MOUNTED POINTMOD 691019-00920 B98 GP MOUNTED POINTMOD 691019-00935 B101 GP MOUNTED POINTMOD 691019-00950 B102 GP MOUNTED POINTMOD 691019-00965 B103 GP MOUNTED POINTMOD 691019-00980 B104 GP MOUNTED POINTMOD 691019-00995 B105 GP MOUNTED POINTMOD 691019-01010 B106 GP MOUNTED POINT

MOD 691019-01025 B111 GP MOUNTED POINTPartNo Description

MOD 691019-01040 B112 GP MOUNTED POINTMOD 691019-01055 B113 GP MOUNTED POINTMOD 691019-01070 B114 GP MOUNTED POINTMOD 691019-01085 B115 GP MOUNTED POINTMOD 691019-01100 B121 GP MOUNTED POINTMOD 691019-01115 B122 GP MOUNTED POINTMOD 691019-01130 B123 GP MOUNTED POINTMOD 691019-01145 B124 GP MOUNTED POINTMOD 691019-01160 B125 GP MOUNTED POINTMOD 691019-01175 B131 GP MOUNTED POINTMOD 691019-01190 B132 GP MOUNTED POINTMOD 691019-01205 B133 GP MOUNTED POINTMOD 691019-01220 B134 GP MOUNTED POINTMOD 691019-01235 B135 GP MOUNTED POINTMOD 691019-01250 B136 GP MOUNTED POINT

These medium grit mounted points are available in a choice of three colors. The colors are an indication of the wheels relative hardness. "A" shapes are mounted on 1/4" x 1 1/2" shanks. "B" shapes are mounted on 1/8" x 1 1/2" shanks. MOD 691019-00010 A1 GP MOUNTED POINTPartNo Description

MOD 691019-00025 A2 GP MOUNTED POINTMOD 691019-00040 A13 GP MOUNTED POINTMOD 691019-00055 A4 GP MOUNTED POINTMOD 691019-00070 A5 GP MOUNTED POINTMOD 691019-00085 A6 GP MOUNTED POINTMOD 691019-00100 A11 GP MOUNTED POINTMOD 691019-00115 A12 GP MOUNTED POINTMOD 691019-00130 A13 GP MOUNTED POINTMOD 691019-00145 A14 GP MOUNTED POINTMOD 691019-00160 A15 GP MOUNTED POINTMOD 691019-00175 A21 GP MOUNTED POINTMOD 691019-00190 A22 GP MOUNTED POINTMOD 691019-00205 A23 GP MOUNTED POINTMOD 691019-00220 A24 GP MOUNTED POINTMOD 691019-00235 A25 GP MOUNTED POINTMOD 691019-00250 A26 GP MOUNTED POINTMOD 691019-00265 A31 GP MOUNTED POINTMOD 691019-00280 A32 GP MOUNTED POINTMOD 691019-00295 A33 GP MOUNTED POINTMOD 691019-00310 A34 GP MOUNTED POINTMOD 691019-00325 A35 GP MOUNTED POINTMOD 691019-00340 A36 GP MOUNTED POINTMOD 691019-00355 A37 GP MOUNTED POINTMOD 691019-00370 A38 GP MOUNTED POINTMOD 691019-00385 A39 GP MOUNTED POINTMOD 691019-00400 A40 GP MOUNTED POINTMOD 691019-00415 B41 GP MOUNTED POINTMOD 691019-00438 B42 GP MOUNTED POINTMOD 691019-00445 B43 GP MOUNTED POINTMOD 691019-00460 B44 GP MOUNTED POINTMOD 691019-00475 B45 GP MOUNTED POINTMOD 691019-00490 B46 GP MOUNTED POINTMOD 691019-00505 B47 GP MOUNTED POINTMOD 691019-00524 B51 GP MOUNTED POINTMOD 691019-00535 B52 GP MOUNTED POINTMOD 691019-00550 B53 GP MOUNTED POINTMOD 691019-00565 B54 GP MOUNTED POINTMOD 691019-00580 B55 GP MOUNTED POINTMOD 691019-00595 B61 GP MOUNTED POINTMOD 691019-00610 B62 GP MOUNTED POINTMOD 691019-00625 B63 GP MOUNTED POINTMOD 691019-00640 B64 GP MOUNTED POINTMOD 691019-00655 B65 GP MOUNTED POINTMOD 691019-00670 B70 GP MOUNTED POINTMOD 691019-00685 B71 GP MOUNTED POINTMOD 691019-00700 B72 GP MOUNTED POINTMOD 691019-00715 B73 GP MOUNTED POINTMOD 691019-00730 B74 GP MOUNTED POINTMOD 691019-00745 B81 GP MOUNTED POINTMOD 691019-00760 B82 GP MOUNTED POINTMOD 691019-00775 B83 GP MOUNTED POINTMOD 691019-00790 B84 GP MOUNTED POINTMOD 691019-00805 B90 GP MOUNTED POINT

Phone: 402-455-6151Toll Free: 800-488-9699

84

Mounted Points Soft to Medium White These medium grit mounted points are available in a choice of three colors.

Mounted Points Medium to Hard Burnt Orange

Abrasives & Brushes

Abrasives


MOD 691019-00835 B92 GP MOUNTED POINTMOD 691019-00850 B93 GP MOUNTED POINT

The colors are an indication of the wheels relative hardness. "A" shapes are mounted on 1/4" x 1 1/2" shanks. "B" shapes are mounted on 1/8" x 1 1/2" shanks. MOD 691019-00015 A1 GP MOUNTED POINTPartNo Description

MOD 691019-00030 A2 GP MOUNTED POINTMOD 691019-00045 A13 GP MOUNTED POINTMOD 691019-00060 A4 GP MOUNTED POINTMOD 691019-00075 A5 GP MOUNTED POINTMOD 691019-00090 A6 GP MOUNTED POINTMOD 691019-00105 A11 GP MOUNTED POINTMOD 691019-00120 A12 GP MOUNTED POINTMOD 691019-00135 A13 GP MOUNTED POINTMOD 691019-00150 A14 GP MOUNTED POINTMOD 691019-00165 A15 GP MOUNTED POINTMOD 691019-00180 A21 GP MOUNTED POINTMOD 691019-00195 A22 GP MOUNTED POINTMOD 691019-00210 A23 GP MOUNTED POINTMOD 691019-00225 A24 GP MOUNTED POINTMOD 691019-00240 A25 GP MOUNTED POINTMOD 691019-00255 A26 GP MOUNTED POINTMOD 691019-00270 A31 GP MOUNTED POINTMOD 691019-00285 A32 GP MOUNTED POINTMOD 691019-00300 A33 GP MOUNTED POINTMOD 691019-00315 A34 GP MOUNTED POINTMOD 691019-00330 A35 GP MOUNTED POINTMOD 691019-00345 A36 GP MOUNTED POINTMOD 691019-00360 A37 GP MOUNTED POINTMOD 691019-00375 A38 GP MOUNTED POINTMOD 691019-00390 A39 GP MOUNTED POINTMOD 691019-00405 A40 GP MOUNTED POINTMOD 691019-00420 B41 GP MOUNTED POINTMOD 691019-00435 B42 GP MOUNTED POINTMOD 691019-00450 B43 GP MOUNTED POINTMOD 691019-00465 B44 GP MOUNTED POINTMOD 691019-00480 B45 GP MOUNTED POINTMOD 691019-00495 B46 GP MOUNTED POINTMOD 691019-00510 B47 GP MOUNTED POINTMOD 691019-00525 B51 GP MOUNTED POINTMOD 691019-00540 B52 GP MOUNTED POINTMOD 691019-00555 B53 GP MOUNTED POINTMOD 691019-00570 B54 GP MOUNTED POINTMOD 691019-00585 B55 GP MOUNTED POINTMOD 691019-00600 B61 GP MOUNTED POINTMOD 691019-00615 B62 GP MOUNTED POINTMOD 691019-00630 B63 GP MOUNTED POINTMOD 691019-00645 B64 GP MOUNTED POINTMOD 691019-00660 B65 GP MOUNTED POINTMOD 691019-00675 B70 GP MOUNTED POINTMOD 691019-00690 B71 GP MOUNTED POINTMOD 691019-00705 B72 GP MOUNTED POINTMOD 691019-00720 B73 GP MOUNTED POINTMOD 691019-00735 B74 GP MOUNTED POINTMOD 691019-00750 B81 GP MOUNTED POINTMOD 691019-00765 B82 GP MOUNTED POINTMOD 691019-00780 B83 GP MOUNTED POINTMOD 691019-00795 B84 GP MOUNTED POINTMOD 691019-00810 B90 GP MOUNTED POINTMOD 691019-00825 B91 GP MOUNTED POINTMOD 691019-00840 B92 GP MOUNTED POINTMOD 691019-00855 B93 GP MOUNTED POINTMOD 691019-00870 B94GP MOUNTED POINTMOD 691019-00885 B95 GP MOUNTED POINTMOD 691019-00900 B96 GP MOUNTED POINT


MOD 691019-00930 B98 GP MOUNTED POINTMOD 691019-00945 B101 GP MOUNTED POINTMOD 691019-00960 B102 GP MOUNTED POINTMOD 691019-00975 B103 GP MOUNTED POINTMOD 691019-00990 B104 GP MOUNTED POINTMOD 691019-01005 B105 GP MOUNTED POINTMOD 691019-01020 B106 GP MOUNTED POINTMOD 691019-01035 B111 GP MOUNTED POINTMOD 691019-01050 B112 GP MOUNTED POINTMOD 691019-01065 B113 GP MOUNTED POINTMOD 691019-01080 B114 GP MOUNTED POINTMOD 691019-01095 B115 GP MOUNTED POINTMOD 691019-01110 B121 GP MOUNTED POINTMOD 691019-01125 B122 GP MOUNTED POINTMOD 691019-01140 B123 GP MOUNTED POINTMOD 691019-01155 B124 GP MOUNTED POINTMOD 691019-01170 B125 GP MOUNTED POINTMOD 691019-01185 B131 GP MOUNTED POINTMOD 691019-01200 B132 GP MOUNTED POINTMOD 691019-01215 B133 GP MOUNTED POINTMOD 691019-01230 B134 GP MOUNTED POINTMOD 691019-01245 B135 GP MOUNTED POINTMOD 691019-01285 B136 GP MOUNTED POINT

Stocked in coarse, medium and fine grit sizes, silicon carbide bench stones may be used to quickly sharpen a cutting edge, but the resulting edge will not be long lasting. (Dark grey in color).

MOD 691019-91008 6 X 2 X 1 COARSE 123PartNo Description

MOD 691019-92008 6 X 2 X 1 MEDIUM 122MOD 691019-93008 6 X 2 X 1 FINE 121MOD 691019-91006 8 X 2 X 1 COARSE 117MOD 691019-92006 8 X 2 X 1 MEDIUM 116MOD 691019-93006 8 X 2 X 1 FINE 115

Oil-filled aluminum oxide bench stones are inventoried in coarse, medium and fine grit sizes. Although a user will not be able to quickly resharpen a cutting edge with an aluminum oxide stone, the cutting edge finally achieved will be long lasting. (Orange/Brown in color)

MOD 691019-94008 6 X 2 X 1 COARSE 123APartNo Description

MOD 691019-95008 6 X 2 X 1 MEDIUM 122AMOD 691019-96008 6 X 2 X 1 FINE 121AMOD 691019-94006 8 X 2 X 1 COARSE 132MOD 691019-95006 8 X 2 X 1 MEDIUM 131MOD 691019-96006 8 X 2 X 1 FINE 130

Phone: 402-455-6151Toll Free: 800-488-9699

85

Mounted Points Medium to Hard Burnt Orange

Mounted Points Hard to Very Hard Blue-Gray These medium grit mounted points are available in a choice of three colors.

Sharpening Stones Single Grit Silicon Carbide

Stones, Oil-Filled Aluminum Oxide

Abras

ives &

Brus

hes

Very soft natural Arkansas bench stones are the best general purpose sharpening stones. They offer a user the ability to simultaneously sharpen and polish a cutting edge. (Speckled brown in color) MOD 691019-71146 3-1/2 X 1 VERY SOFT SM3BPartNo Description

MOD 691019-71147 4 X 1-7/8 VERY SOFT SM4BMOD 691019-71148 6 X 1-7/8 VERY SOFT SM6BMOD 691019-71149 8 X 1-7/8 VERY SOFT SM8B

Sticks, DressingBoron Carbide

MOD 691019-91019 3/16 X 1/2 X 3 BC1PartNo Description

MOD 691019-91020 3/16 X 1/2 X 2 BC2

Sticks, Dressing, Vitrified Aluminum Oxide

MOD 691019-81037 3/4 X 3/4 X 4 C4C4DWE60L WA60-LVW4PartNo Description Specification

MOD 691019-82037 3/4 X 3/4 X 4 C4C4DWE80L WA80-LVW4MOD 691019-81070 3/4 X 3/4 X 4 349 WA150-HVW4MOD 691019-83037 3/4 X 3/4 X 4 C4C4DWE150I WA150-IVW4MOD 691019-84037 3/4 X 3/4 X 4 C4C4DWE240H WA240-HVW4

Cutters, Desmond Huntington

DESMON 11220 0 CUTTERS 1-1/4" X 1/4" HOLEPartNo Description

DESMON 11260 0 PARAGON CUTTERSDESMON 11250 0 THIN GAUGE CUTTERSDESMON 11320 1 HUNTINGTON CUTTERS 1-12" X 1/2 HOLEDESMON 11520 2 HUNTINGTON CUTTERS 19/32DESMON 11820 2-C HUNTINGTON CUTTERS W/ 5/8" HOLEDESMON 11620 22 (DOUBLE SET OF #2) CUTTERSDESMON 11420 5-H 1-5/8: DIA. 3/8" HOLEDESMON 11720 NO. 1 SPECIAL 1-5/8" DIA. 1/2 "HOLE

DESMON 11210 0 HUNTINGTONPartNo Description

DESMON 11310 1 HUNTINGTONDESMON 11510 2 HUNTINGTONDESMON 11410 21 HUNTINGTONDESMON 11610 22 HUNTINGTON

DESMON 13110 0 HEXPartNo Description

DESMON 13310 21 HEXDESMON 13410 5-H HEXDESMON 13510 2 HEX

Glass-Shot beads are manufactured of high grade, optical crown glass, soda lime type. High in silica content, they contain no lead and are resistant to atmospheric moisture, dilute acids and alkalis. Annealed in the spherical shape for stress equalization.

CAT MS-XGX GLASSHOT 20-30 MICROBEADS .3028-.0232 840-590 65PartNo Description Nominal Inches Microns

Range% TrueSpheres

CAT MS-XPX GLASSHOT 25-45 MICROBEADS .276-.0138 710-350 65

CAT MS-P GLASSHOT 35-60 MICROBEADS .0195-.0097 500-250 70CAT MS-XHX GLASSHOT 40-70 MICROBEADS .0164-.0082 420-210 70

CAT MS-H GLASSHOT 60-100 MICROBEADS .0097-.0058 250-149 75CAT MH GLASSHOT 70-140 MICROBEADS .0082-.0041 210-105 80CAT MS-M GLASSHOT 100-200 MICROBEADS .0058-.0029 149-74 85CAT MS-ML GLASSHOT 140-270 MICROBEADS .0041-.0021 105-53 85CAT MS-L GLASSHOT 170-325 MICROBEADS .0035-.0017 90-44 85CAT MS-XL GLASSHOT 270 AND FINER

MICROBEADS.0021-.0005 53 and F 85

CAT MS-XLX GLASSHOT 325 AND FINERMICROBEADS

.0017-.0002 44 and F 85

CAT MS-XP GLASSHOT 30-50 MICROBEADS .0232-.0116 590-297 65

CAT MS-XH GLASSHOT 50-80 MICROBEADS 297-177 70

Dressers, Desmond Huntington

Phone: 402-455-6151Toll Free: 800-488-9699

86


Abrasives

Sharpening Stones Single Grit Very Soft Arkansas

Dressers, Desmond Hex

Finishing Media, Glas-Shot

.0116-.0069

Log-on to www.johnday.com For Pricing and Product Information

.0116-.0069

Abrasives & Brushes

Abrasives

National Metal Abrasive Inc. 'Supplier of Metallic Abrasives for Sandblasting Applications 'Steel Grit/Steel Shot is commonly used in airless applications since it is softer than aluminum oxide and doesn't fracture as easily. It is also used in direct pressure applications where a heavy profile is needed. Steel shot is used for shot peening of ferrous materials. Call your nearest John Day Company representative for more information.

NATMET GS-25 GS25 STEEL SHOT, 50# BAGPartNo Description

NATMET GS-40 GS40 STEEL SHOT, 50# BAGNATMET GS-50 GS50 STEEL SHOT, 50# BAGNATMET S-280 S280 STEEL SHOT, 2000# DRUMNATMET S-330

Almco Inc. 'Aluminum Oxide has a blocky shape with multiple, sharp cutting edges that penetrate work pieces, dig-out microchips and leave exceptionally clean etched surfaces. It is effective on metals, glass, ceramic, marble, granite and other stone. It has a MOHS hardness of 9 which makes it a very tough and durable material. During blasting it fractures and thereby does not create a dusty atmosphere. It is an excellent material for cleaning and providing a uniform surface or anchor pattern.

Almco Inc. supplies a complete line of media and cleaning systems and vibratory finishing machines. Contact your nearest John Day Company representative for more information.

ALMCO #1 OX-1A ALUMINUM OXIDE TUMBLING NUGGETPartNo

Almco Inc. 'Ceramic beads are a product of a fusion process of oxides at a very high temperature. Ceramic beads do not contaminate treated parts by embedment of particles. Their exceptional properties of toughness, impact resistance, hardness and elastic allow them to maintain their initial shape without shattering even after a long period of time. They can be used for general cleaning, deburring and peening.

Almco Inc. supplies a complete line of media and cleaning systems and vibratory finishing machines. Contact your nearest John Day Company representative for more information.

ALMCO AT25WK P-F CERAMIC TUMBLING MEDIAPartNo Description

Phone: 402-455-6151Toll Free: 800-488-9699

87

Notes

S280 STEEL SHOT, 2000# DRUM

Description

Finishing Media Steel Grit and Steel Shot

Aluminum Oxide Nuggets

Ceramics, Beads

Abras

ives &

Brus

hes

Abrasives

Phone: 402-455-6151Toll Free: 800-488-9699

88

Finishing Media Glas-Shot Comparison

Documents

LH Toll Free - John Day Company catalog/abrasive… · Lifetime nylon-end bearings provide free-wheeling roller operation without leaving marks on the painted surface. Plastic handle