Upload
nancyspahr
View
10
Download
0
Tags:
Embed Size (px)
Citation preview
Why Did I Choose This Subject
• I choose this subject because I hate slingshots.
• With my model I made it so that the slingshot would work better and I would enjoy them more.
What I Enjoyed Most
• I enjoyed making the slingshot so it wouldnt slip from my fingers.
• I am also looking forward to seeing the joy on peoples faces when they shoot the slingshot with my attachment.
Procedures• Made a hole in the pouch.
• Put the hook through the pouch.
• Bend the hook downward so that it wouldn't be pokeing out.
• Hammered the point of the screw so that it would be much safer.
Problems Encountered
• The slingshot was hard to shoot in the begining, but after I got a technique down it shot a lot better.
• It was also difficult to find a way to position the hook so it wouldnt be in the way.
Results• The device I made was a success. I was
able to get a better grip and pull it back better.
• The hook didn't add much to the slingshot but made a huge difference.
• It was not only better for pulling it back, but it was better to aim with as well.
What I Learned• I learned that some slingshots are very
cheap.
• How to get the angle of the slingshot right to get a accurate shot.
• How far to stretch the slingshot back to fire it a certain distance.
Things I Would Do Differently• What I would do differently is making the
way I put the hook through the leather sling different.
• Try to make a way so the hook wouldn't affect the position of the projectile.
The Most Challenging Part Of My Project
• The most challenging part of the project was getting the projectile in the right place so I could shoot it well.
• It was also a challeng getting the hook so it wouldn't interfere with the projectile.