Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Levels and Measuring Tools
Quick, easy and accurate measurements can mean the difference between a job well done and one that misses the mark. Klein offers a variety of levels and other measuring devices that will help you measure up to the task.
Lighted Billet Aluminum Torpedo Level Additional Features:
• Professional grade billet aluminum body is precision machined for high-accuracy leveling
• Large, bright LED high-definition vials are easy to read in any lighting condition
• Vials are at 3 angles: level, 90 and 45 degrees
• 3-minute auto shut-off saves battery life
• Water and impact resistant
935RBLT
Cat. No. Overall Length Weight935RBLT 9" (228.6 mm) 11.2 oz. (318 g)
Billet Aluminum Torpedo Level Additional Features:
• Professional grade billet aluminum body is precision machined for high-accuracy leveling
• Vials are at 4 angles: level, 90, 45 and 30 degrees
935RB
Cat. No. Overall Length Weight935RB 8" (203.2 mm) 7.4 oz. (210 g) High-Visibility Orange won't get lost or blend into conduit
Super Bright High-Definition LED Vials
NEW!
NEW!
NEW!
NEW!
Aluminum Levels
Large, high visibility vials are easy to read
Top V-Groove fits contour of pipe
ULTRAPOWERFUL Rare-Earth Magnets
MAGNET TRACK
Patent Pending
Tapered nose easily slides into pockets and fits in tighter spaces
High-visibility orange levels won’t get lost on conduit
Levels and Measuring Tools
See page 310 for additional information on warnings.
www.kleintools.com
116
Cat. No. Overall Length Weight935R 9" (228.6 mm) 8.5 oz. (241 g)9319RETT 9" (228.6 mm) 1.6 oz. (45 g)
935R
935
Cat. No. Overall Length Weight935 9" (228.6 mm) 4.3 oz. (122 g)
Accu-Bend™ 4-Vial Level Additional Features:
• Professional grade billet aluminum body is precision machined for high-accuracy leveling
• Thumb screw attaches level to conduit to measure angle while bending
• Large, easy to read high-visibility vials at 4 angles: level, 90, 45, and 30 degrees935AB4V
935AB1V
Cat. No. Overall Length Weight935AB1V 2-1/2" (63.5 mm) 2.4 oz. (68 g)
WARNING: Brass bolt contains lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
WARNING: Brass bolt contains lead, a chemical known to the State of California to cause cancer, and birth defects or other reproductive harm. Wash hands after handling.
NEW!
NEW!
NEW!
NEW!
NEW!
NEW!
Cat. No. Overall Length Weight935AB4V 6-1/4" (158.8 mm) 5.9 oz. (168 g)NEW!
NEW!
Accu-Bend™ 1-Vial Level Additional Features:
• Professional grade billet aluminum body is precision machined for high-accuracy leveling
• Ensures precise 90º bends
• Thumb screw attaches level to conduit to measure angle while bending
• Non-magnetic
• 1 vial: 90º
Torpedo Level Additional Features:
• Vials are at 3 angles: level, 90 and 45 degrees
• Magnetic bottom holds securely to conduit and metal surfaces
Aluminum Torpedo Level Additional Features:
• Vials are at 3 angles: level, 90 and 45 degrees
• Made from aluminum for added durability
• Cat. No. 931-9RETT has tether hole for working at height
NEW!Tether ring available on Cat. No. 9319RETT for working at height
Levels
Levels and Measuring Tools
See page 310 for additional information on warnings.
www.kleintools.com
117
86225
86125Cat. No. Blade Length Hook Weight86125 25 ft. (7.6 m) Single 17.9 oz. (506 g)
Cat. No. Blade Length Hook Weight86216 16 ft. (4.9 m) Double 13.0 oz. (367 g)86225 25 ft. (7.6 m) Double 17.6 oz. (498 g)86230 30 ft. (9.1 m) Double 20.4 oz. (580 g)Metric86315 5 m Double 13.0 oz. (367 g)86375 7.5 m Double 18.1 oz. (514 g)
NEW!
NEW!
NEW!
NEW!NEW!
NEW!NEW!
NEW!
Tape Measure - Non-Magnetic Additional Features:
• Heavy duty nylon coating protects blade printing
• Super-sized back clip holds securely to wide belts and extends into pockets
• U.S. Patent Pending
Tape Measures - Magnetic Additional Features:
• Heavy duty nylon coating protects blade printing
• Super-sized back clip holds securely to wide belts and extends into pockets
• Cat. Nos. 86315 and 86375 feature double sided printing with centimeters and inches
• U.S. Patent Pending
Up to 9-1/2 ft. (3 m)
STAND-OUT
Blade-printed conduit multiplier bending tablehelps calculate offsets and saddles
Tape Measures
WARNING: • Protect hands when cleaning magnetic tip end. Use gloves or cloth.• Avoid magnetic contact with sensitive electronic or computer equipment.• To avoid personal injury and damage to this tool, do not allow the tape blade to retract into case. • Do NOT open case. Spring motor is under tension, and opening case may cause injury.
Magnetic end hooks with dual angle polarityattaches to conduit and steel studs to easily read from above or below
Retraction Speed Brakecontrols blade speed and protects fingers from having to touch blade
Pate
nt P
endi
ng
Levels and Measuring Tools
See page 310 for additional information on warnings.
www.kleintools.com
118
Tape Measures-Steel with High-Visibility Case • High-visibility, high-impact orange case makes it easy to find in a tool box, pouch and on the jobsite
• 16" stud markings and 19.2" truss markings
928-25HV
Cat. No. Blade Length Width Weight928-25HV 25 ft. (7.6 m) 1" (25.4 mm) 16 oz. (454 g)
Tape Measure Holders • Klein offers a complete selection of leather or nylon Tape Holders and Pouches
5707 5195 5196 5712 5195TT
93LDM65
Cat. No. Batteries Height Width Depth Weight93LDM65 2 x AAA 4-1/2" (114.3 mm) 2" (50.8 mm) 1-3/8" (34.9 mm) 5.1 oz. (145 g)
NEW!
NEW!
Tape Measure Holder Cat. No. Description Overal Size Weight86216, 86315 5195 Medium Leather Pouch 4-1/2" x 7" (114 mm x 178 mm) 2.9 oz. (82 g)
5707 Nylon Tape Measure Clip/Holder 4-1/8" x 3-3/4" ( 104 mm x 95 mm) 1.6 oz. (45 g)86125, 86225, 86375 5196 Large Leather Pouch 5" x 7" (127 mm x 178 mm) 3.4 oz. (95 g)
5707 Nylon Tape Measure Clip/Holder 4-1/8" x 3-3/4" ( 104 mm x 95 mm) 1.6 oz. (45 g)5195TT Tape Measure Holder with Ring 3" x 3.5" (76 mm x 89 mm) 1.6 oz. (45 g)
86230 5196 Large Leather Pouch 5" x 7" (127 mm x 178 mm) 3.4 oz. (95 g)5707 Nylon Tape Measure Clip/Holder 4-1/8" x 3-3/4" ( 104 mm x 95 mm) 1.6 oz. (45 g)5712 Tape Measure Holder with Ring 8-1/4" x 4-1/2" (210 mm x 114 mm) 3.8 oz. (109 g)
Laser Distance Measurer • Meter provides measurements up to 65 ft. (19.8 m) in distance, at an accuracy of + or - 1/16" (1.6 mm)
• Quickly calculates length, area, volume, and indirect measurements with large, easy-to-read buttons
• Offers the option of one-touch, single-distance measurement and continuous measurement
• Depth gauge stick flips out to measure from inside corners or channels
• Highly visible backlit display
• Provides both fractional (imperial) and metric readings
• Memory stores last 20 measurements
• Includes handy carrying pouch to keep until safe when not in use
Tape Measures
Laser Measuring Tools
Levels and Measuring Tools
See page 310 for additional information on warnings.
www.kleintools.com
119
Non-Conductive Fiberglass Folding Rules • Constructed of tough nylon, reinforced with glass fibers for added durability, and
resistance to weather, abrasion and most chemicals
• Positive locking joints and stainless steel spring hinges for added strength
• Measurements are marked on both sides and both edges, graduated to 1/16th inch
• Black markings on yellow, with red stud center markings every 16 inches
• Engraved graduations on both sides
910-6
Wood Folding Rules • Strong, 6' (183 cm) long hardwood rules with clear abrasion-resistant coating
• Black markings on yellow, with red stud center markings every 16 inches
• Measurements are marked on both sides and both edges, graduated to 1/16th inch
• Riveted lock joints are designed for long wear and maintained accuracy
• Extension slide moves under friction in a T-slot with stops at each end. (Cat. No. 905-6)
901-6Cat. No. Reading Length Weight900-6 Inside 6 ft. (1.8 m) 5.3 oz. (150 g)901-6 Outside 6 ft. (1.8 m) 5.3 oz. (150 g)905-6 Outside 6 ft. (1.8 m) 5.3 oz. (150 g)
946-100
Cat. No. Description Length Width Weight946-50 50' Woven Fiberglass Tape Case 50 ft. (15.2 m) 1/2" (12.7 mm) 12.8 oz. (363 g)946-100 100' Woven Fiberglass Tape Case 100 ft. (30 m) 1/2" (12.7 mm) 1.2 lbs. (0.54 kg)946-150 150' Woven Fiberglass Tape Open-Reel 150 ft. (45.7 m) 1/2" (12.7 mm) 1.7 lbs. (0.77 kg)
946-150
Cat. No. Reading Length Weight910-6 Inside 6 ft. (1.8 m) 5.3 oz. (150 g)911-6 Outside 6 ft. (1.8 m) 5.3 oz. (150 g)
Woven Fiberglass Tapes • Woven fiberglass tape with moisture-proof coating of polyvinyl chloride
assures durability and protects against oil or chemicals
• Can be immersed in water without adverse effects
• All metal parts are nickel-plated for protection against rust
• End-hooks are permanently attached to a reinforced strip
• Case and reel are ruggedly built, yet lightweight and comfortable to use
• Tape line is graduated in feet and inches to 8ths
• Black graduating numbers and red foot markings on yellow background
• Protective carrying case on Cat. Nos. 946-50 and 946-100 encloses tape completely
• Tape rings tuck neatly into case opening for storage
• Cat. No. 946-150 is contained in an open reel and is easy to handle and rewind
Folding Rulers
Fiberglass Tapes
Levels and Measuring Tools
See page 310 for additional information on warnings.
www.kleintools.com
120