Levelling - Engineering | Machinerymachine-dro.co.uk/media/wysiwyg/mwcatalogue/Leveling.pdf · 205 LEVELLING Tel: 01992 455921 Partners in Precision Wyler Bubble Spirit Levels A widerangeof

Levelling

Tel: 01992 455 921 www.machine-dro.co.uk

��

204

LEVELLING

For more information visit www.machine-dro.co.uk

Digital Level 580 Series

Featuresrosnes level lanoitagivan noisicerP •

• CNC machined super �at edge

• Heavy duty aluminium alloy body, chrome �nish

• Laser accurately extends level capabilities

• Strong magnets on underside

• Measuring: 4x90º

• Resolution: 0.05º

• Battery: standard 9V

Digital Mini-Mag Level 570 Series

Features• Measuring range 360° (4 x 90°)

• Embedded magnets on three sides

• Resolution 0.05°

• Accuracy +/- 0.2°

• Standard 9V battery

• Dimensions: L60mm x H60mm x W35mm

DIGITAL MINI-MAG LEVELCode No DescriptionMW570-01 Mini-Mag Level

DIGITAL LEVELCode No Size Resolution AccuracyMW580-01 150mm / 6" 0.05º ± 0.2ºMW580-02 225mm / 9" 0.05º ± 0.2ºMW580-03 600mm / 24" 0.05º ± 0.2ºMW580-04 1200mm / 48" 0.05º ± 0.2º

��

205

LEVELLING

Tel: 01992 455921 Partners in Precision

Wyler Bubble Spirit LevelsA wide range of W yler Bubble Spirit Levels are available, designed to be �tted onto machines and other applications where a clear visual indication of levelling is required.

Adjustable Micrometer Spirit Level No. 68Used to measure the �atness of surfaces, inclinatio ns, taper or concentricity. With prismatic base, hardened and ground for measuring shafts and �at surfaces. The micrometer has a knurled knob for setting zero. Height 80mm, length 150mm and sensitivity 0.02mm/m

Tubular Spirit Level No. 59. With �at base, 80 x 9 (16mm dia), 100 x 10 (20mm dia), 150 x 11 (22mm dia.) and 200 x 12 ( 22mm dia.)

Sensitivity Base lengths (mm)mm/m 80 100 150 2000.05 60-62109 60-621110.1 60-62105 60-62107 60-62109A 60-62111A0.3 60-62105A 60-62107A 60-62109A 60-62111B1.0 60-62106 60-62108 60-62110 60-62112

Code No Sensitivity60-6242 0.02mm/m

Note: Other models available, see www.wylerag.com for more information

Micrometric Spirit Level No. 53For measurement of irregular plane surfaces. Permits direct reading of the inclination in 0.001" on the scale of the micrometer. Finer displacements are obtainable from the displacement of the bubble. Support at each end means that uneven surfaces are bridged.

Code No Sensitivity60-6243 0.02mm/m60-6244 0.05mm/m

Shaft Spirit Level No. A63 . Prismatic base. Size 30 x 35mm. Wide viewing sl ots.

Sensitivity (mm/m) 100

Base Length (mm)150 200

0.05 60-6290 60-6292 60-62940.1 60-6290A 60-6292A 60-6294A0.3 60-6290B 60-6292B 60-6294B1.0 60-6291 60-6293 60-6295

Circular Level No. 76. The Cross Spirit Level 76 is specially designed for the simultaneous measuring or levelling of surfaces on machines, apparatus, etc. The main advantage of this spirit level is that the inclination of both axis (X- and Y-axis) is visualised at the same time. This enables a quick levelling of a measuring object in a very easy way

Sensitivity Diameter (mm)mm/m 40 50 60 802 60-62170 60-62170A 60-62170B 60-62170C1.0 60-62171 60-62173 60-621750.3 60-62172 60-62174

Sensitivity (mm/m)

Diameter (mm)80 150

0.02 60-621670.05 60-621680.1 60-62166 60-621690.3 60-62166A 60-62169A

Cross Level No. 78

Swiss Precision

��

206

LEVELLING


Horizontal Spirit Level No. 55SWith prismatic base for checking horizontal surface s, plane and cylindrical.

Wyler Spirit Levels - 58S/55S SeriesWyler Conventional Spirit Levels are manufactured to the highest of standards using arti�cially aged materials. With precise pri smatic bases the new "Spirit" branded models o�er an especially rigid vial adjus tment system.

Frame Spirit Level No. 58SWith two prismatic and two �at base surfaces for c hecking horizontal and vertical surfaces, plane or cylindri cal.

LEVEL NO. 58SSensitivity Base lengths (mm)mm/m 100 150 200 250 3000.02 60-6207 60-6212 60-6217 60-6222 60-62270.05 60-6208 60-6213 60-6218 60-6223 60-62280.1 60-6209 60-6214 60-6219 60-6224 60-6229

LEVEL NO. 55SSensitivity Base lengths (mm)mm/m 100 150 200 250 300 5000.02 60-6252 60-6257 60-6262 60-6267 60-6272 60-62770.05 60-6253 60-6258 60-6263 60-6268 60-6273 60-62780.1 60-6254 60-6259 60-6264 60-6269 60-6274 60-6279

LEVEL SENSITIVITIES

2 seconds 0.0001" in 10" or 0.01mm/m.4 seconds 0.0002" in 10" or 0.02mm/m.10 seconds 0.0005" in 10" or 0.05mm/m.20 seconds 0.001" in 10" or 0.10mm/m.

Frame Angular LevelsThese levels are ideal for checking both horizontal and vertical surfaces. Their prismatic base makes them suitable for both c ylindrical and �at surfaces.

Magnetic Spirit Level No. A48This level has strong magnetic inserts in its 150mm long base. They provide a positive hold on both �at and cylin drical vertical surfaces.

MAGNETIC SPIRIT LEVEL NO. A48esaBytivitisneS

mm/m Code No Length (mm)0.02 60-6201 1500.05 60-6201B 1500.1 60-6201C 150

Swiss Precision

��

207

LEVELLING


Wyler nivelSWISS - Electronic Analogue LevelThe functional range of W yler nivelSWISS precision levels employs the accurate inductive pendulum principle. Precision prismatic bases make the range particularly useful for measurement on both plane or cylindrical work pieces, whilst the easy to read analogue display aids ease of use.

nivelSWISS 50H with horizontal baseSuitable for measuring only horizontal surfaces. Thi s model can have a choice of screw on granite bases in either 200mm, 250mm or 500mm lengths.

nivelSWISS 50W with angular baseSuitable for measuring both horizontal and vertical surfaces.

The nivelSWISS has two measuring ranges, reversible:

a .ces 051 -/+ ,m/mm57.0 -/+ ,"01 / "5700.0 -/+ and one division equals 0.0005" in 10" / 0.05mm/m / 10 sec.

b .ces 03 -/+ ,m/mm51.0 -/+ ,"01 / "5100.0 -/+ and one division equals 0.0001" in 10" / 0.01mm/m / 2 sec.

Height 4.5" (116mm)

Base length 6" (150mm)

Base width 1.3" (35mm)

Accuracy +/- 1.5 min.

Sensitivity 0.003"/10" (0.3mm/m)

Clinometer 80This is an instrument for measuring angular deviatio n accurately, with a circular vernier scale marked 0 - 180 - 0 at one degree intervals and the micrometer graduated in minutes with a vial sensitivity of 0.3mm/m (0.003" / 10" or one minute).

The prismatic base is hardened and ground.

Code No Description60-6164 nivelSWISS 50W with angular base

Code No Description60-6165 nivelSWISS 50H with horizontal base

Code No Description60-62193 Clinometer 80

Swiss Precision

��

208

LEVELLING


Wyler Digital Inclinometers - Clinotronic Plus IR

Wyler Clino 2000

The Clinotronic Plus IR builds on the success of its popular predecessor t he Clinotronic. This robust shop-�oor proof inclinome ter features four machined faces permitting the measurement of angles through 360°, its three simple button operation and high visibility display allow easy access to its many operating modes including absolute and relative mod es. The Clino IR now comes with an inbuilt Infa Red receiver Lab Excel S oftware and cables as standard, this allows the use of an Infa Red transm itter (optional) to remotely transmit data to the Labview software (included).

The CLINO 2000 is a precision hand held inclination measuring instrument of the highest standard. Designed as a standalone unit, it can also be used together with a second instrument for measurements where a refere nce is required. Furthermore it can be connected to a PC / Laptop via a built-in RS-232 interface.

The measured primary values are compared to a store d reference curve in the CLINO 2000. This allows a very accurate calculation of the inclination.

TECHNICAL SPECIFICATIONClinotronic Plus IR

Measuring range +/- 45 deg / +/- 10 deg (depending on model)Optional +/- 30 deg. / +/- 10 degSettle time ca.1 secondsSensitivity 0.02 mm/mWorking temp. 0 to 40° COutput RS 485Battery Standard AA 1.5VHousing Aluminium hard anodisedDimensions 100 x 75 x 30mmWeight 485g

TECHNICAL SPECIFICATION

gedcrA 54±dradnatSegnar gnirusaeMgedcrA 06± / gedcrA 03± / gedcrA 01±lanoitpO

Calibration Built-in software and calibration aids Correction of gain by simple 3-point-methodSettling time Value available after < 5 secResolution Depending on units set 5 Arcsec (approx. 0.025mm/m)Limits of error within 6 months / Gain (TA = 20ºC) < 12 Arcsec + 0.027%R.O.

at -45°, 0°, +45° straight after as above, but < 30 Arcsecquick calibration (CLINO 2000 ±45° only)

Data connection Special cables RS232 / RS 485, asynchr., 7 Bit,2 Stopbits, no parity, 9600 Baud

)srh 05-53( enilaklA V5.1 AA eziS x 2seirettaBylppus rewoPRechargeable (optional) 2 x Size AF 1,2 V NiMH rechargeable

(25-45 hrs)Wm 005-002 / CD V 84+ ...21+ylppus rewop lanretxE

Housing (Weight) Cast iron, rust protected 150 x 150 x 35 mm (3 kg)C° 04 ot °0gnitarepOegnar .pmeT

C° 07 ot °02-egarotSCode No. 60-6190

CLINOTRONIC PLUS IRCode No Description60-6180 Clinotronic 45 IR, < 2 min + 1 digit accuracy, +/- 45 deg. range60-6191 Clinotronic 10 IR, < 1 min + 1 digit accuracy, +/- 10 deg. range 60-6196 Clinotronic 45 IR with vertical magnetic face60-6198 Clinotronic 45 IR with vertical & horizontal magnetic face60-6181 IR Zapper

Features egnar gnirusaem egral eht revo noisicerp hgiH •

of ± 45° / ± 60° / ± 30° / ± 10°, with integrated temperature compensation

tnemtsujda orez sseltroffE •

• Easy to calibrate

• Large digital display

tnemurtsni lanoitidda na tcennoc ot elbissoP •for di�erential measurement or ZEROTRONIC sensors by using the serial port

htiw detcetorp tsur ,gnisuoh leets degguR •prismatic bases

• Built-in cross vial

• State of the art digital technology

• Conforms to CE requirements

• As an option magnetic inserts are available

Swiss Precision

��

209

LEVELLING


Wyler BlueCLINO Precision Inclinometers

BLUECLINO PRECISION INCLINOMETERSCode No Description60-6190B Cast Iron Precision Inclinometer*60-6190BA Aluminium Precision Inclinometer*60-6190HP Cast Iron High Precision Inclinometer** without quick calibration function

Features - BlueCLINOyalpsid ruoloc daer ot ysae yrev dna egraL •

• elbaliava seliforp ruoloc suoiraV

elbaliava slevel tirips ro shparg rab ekil sdohtem yalpsid suoiraV •

detacidni eb nac stinu tnerruc llA •

htiw °06 ± fo egnar gnirusaem elohw eht revo noisicerP hgiH •integrated temperature compensation

,tnemerusaem lasrever a htiw rehtegot ,erawtfos lanretni ehT •allows a simple zero setting

fo edam sesab citamsirp htiw ,detcetorp tsur ,gnisuoh degguR •either aluminium hard anodized or cast iron, rust protected

ot redro ni sixa lacitrev eht fo tnemngila ysae rof laiv ssorc ni-tliuB •avoid “twist errors”

latigid fo egnar elohw eht htiw elbitapmoc si tnemurtsni ehT •sensors from WYLER

ro seirettab elbaegrahcer ,seirettaB V5.1 nommoc htiw derewoP •with mains adapter

tsniaga ytinummi( stnemeriuqer EC tcirts slifluF •electromagnetic smog)

noitativarg lacol eht ot detsujda eb nac tnemurtsni ehT •

Optional Accessoriesonhcet-htooteulB no desab ,noitacinummoc sseleriW • logy

noitcnuf noitarbilac kciuQ •

elpmis fo pleh eht htiw detarbilacer eb nac tnemurtsni ehT •calibration tools which are supplied together with the instrument. This process is supported by the internal software

elbissop sesab gnirusaem lla ni stresni citengaM •

a hcus ni dehsinif eb ,noitpo na sa ,nac edis thgir eht no esab ehT •way that it can be used as a �at measuring base

fo pot eht ot dehcatta eb yam esab gnirusaem htruof A •the instrument

• External power supply

CP a ot tnemurtsni eht tcennoc ot elbaC •

atad gnirusaem tcelloc ot erawtfoS •

Aluminium HousingSteel Housing BlueCLINO High Precision with Cast Iron Prismatic Base

Features - BlueCLINO HP• Large and very easy-to-read colour display

• Various colour pro�les can be chosen

tirips ro shparg rab sa hcus elbaliava era sdohtem yalpsid suoiraV •levels can be chosen

• All current units can be indicated

• Measuring range of ±1° (corresponds to about ±18mm/m)

edam gnisuoh detcetorp-tsur ,deggur eht ot eud noisicerp hgiH •out of cast iron with prismatic and scraped bases on the left-hand and lower side of the housing, combined with an integrated temperature compensation

• Right hand base is precision ground

a dna erawtfos detargetni eht htiw tnemtsujda-orez elpmiS •reversal measurement

ot redro ni sixa lacitrev eht fo tnemngila ysae rof laiv ssorc ni-tliuB •avoid “twist errors”

fo egnar lluf eht htiw elbitapmoc si noisicerP hgiH ONILCeulB ehT •WYLER digital sensors

ro seirettab elbaegrahcer ,seirettab V 5.1 dradnats yb derewoP •with mains adapter

tsniaga ytinummi( stnemeriuqer EC tcirts eht slifluF •electromagnetic smog)

noitativarg lacol ot detsujda eb nac tnemurtsni ehT •

Optional Accessoriesonhcet htooteulB no desab ,noitacinummoc sseleriW • logy

mottob eht dna lacitrev dnah tfel eht ni stresni citengaM •horizontal base possible

ylppus rewop lanretxE •

CP a ot tnemurtsni eht tcennoc ot elbaC •

atad gnirusaem tcelloc ot erawtfoS •

Swiss Precision

��

210

LEVELLING


Wyler BlueSYSTEM InclinometersThe BlueSYSTEM is a continuous further enhancement of the well known and well established measuring instruments MINILEVEL NT and LEVELTRONIC NT. A BlueSYSTEM normally consists of one or two measuring BlueLEVEL instruments and an indicating unit BlueMETER. Depending on the application, the BlueMETER can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values.

The new BlueSYSTEM BASIC forms part of the BlueSYSTEM family; the latest generation of electronic inclination measuring instruments and systems from Wyler. BlueSYSTEM BASIC normally consists of one or two measuring instruments (Blue-LEVEL BASIC) and a display unit (BlueMETER BASIC). Depending on the application, the BlueMETER BASIC can also be connected to a PC with evaluation software allowing the on-line evaluation and presentation of the measured values.

This latest generation of high precision electronic inclination measuring instruments is speci�cally suitable for the measurement of the smallest angles, making it ideal for measuring the �atness of surface plates or the geometry of machine tools.

Wyler BlueSYSTEM BASIC

Featuresof desimitpo yllanoitcnuf si hcihw ngised tcapmoC • r precision measurement

)noitpO( dradnats ™htooteulB devorppa yllanoitanretni eht no desab noissimsnart atad sseleriW •

eht ni smetsys tnednepedni lareves fo esu eht gniwolla sserdda cificeps nwo sti sah tnemurtsni hcaE •same room without interfering with each other

ecnatsid a morf detaitini eb nac tnemerusaem eht ,reviecer RI ni tliub a sah tnemurtsni hcae ecniS •

6722 NID ot gnidrocca ytiraeniL •

secafretni 584 SR / 224 SR / 232 SR htiw deppiuqe era stnemurtsni llA •

”C“ epyt seirettab V 5.1 dradnats yb derewoP •

snoitaluger CME elbacilppa lla dna snoitaluger EC htiw ecnailpmoc nI •

Featuresyllanoitcnuf si hcihw ngised tnasaelp dna tcapmoC • optimised for precision measurement

lanoitpO* dradnats htooteulB devorppa yllanoitanretni eht no desab noissimsnart atad sseleriW •

detator eb nac eldnah eht ecnis sedis htob morf daer eb nac hcihw yalpsid DCL daer ot ysae egraL •

ni smetsys tnednepedni lareves fo esu eht gniwolla sserdda cificeps nwo sti sah tnemurtsni hcaE •the same room without interfering with each other

• Linearity according to DIN 2276

secafretni 584SR224SR/232 SR htiw deppiuqe era stnemurtsni llA •

• Powered by standard 1.5V batteries type ‘C’

snoitaluger CME elbacilppa lla dna snoitaluger EC htiw ecnailpmoc nI •

BlueSYSTEM BASIC INCLINOMETERS

BLUE LEVEL BLUE LEVEL BASICHorizontal Code No Code No Code No Code NoSteel Base Without Wireless With Wireless Without Wireless With WirelessLength Sensitivity Data Transmission Data Transmission Data Transmission Data Transmission110mm 0.001mm/m or 0.2 arc seconds 60-6608B 60-6608BW 60-6608BB 60-6608BBW

0.005mm/m or 1 arc second 60-6609B 60-6609BW 60-6609BB 60-6609BBW150mm 0.001mm/m or 0.2 arc seconds 60-6611B 60-6611BW 60-6611BB 60-6611BBW


0.005mm/m or 1 arc second 60-6615B 60-6615BW 60-6615BB 60-6615BBWAngularPrismatic Length Sensitivity150mm 0.001mm/m or 0.2 arc seconds 60-6602B 60-6602BW 60-6602BB 60-6602BBW


0.005mm/m or 1 arc second 60-6606B 60-6606BW 60-6606BB 60-6606BBW

Swiss Precision

��

211

LEVELLING


Wyler BlueSYSTEM Display Units

gnisuoh muinimula ni ngised tnasaelp dna tcapmoC • and state of the art technology

devorppa yllanoitanretni eht no desab noissimsnart atad sseleriW •Bluetooth™ standard (option)

• Large and easy-to-read LCD display

detcennoc stnemurtsni desingocer yllacitamotua eht gniwohs yalpsiD •

• Powered by standard 1.5 V batteries type “C”

elbacilppa lla dna snoitaluger EC htiw ecnailpmoc nI •EMC regulations

A trop ot detcennoc stnemurtsni lareves fo eno htiw gnirusaeM •

B trop ot detcennoc stnemurtsni lareves fo eno htiw gnirusaeM •

eht ot detcennoc stnemurtsni owt neewteb tnemerusaem laitnereffiD •ports A and B

eht ot detcennoc stnemurtsni lareves fo hcae eno fo yalpsid suoenatlumiS •ports A and B

The following functions are included in the BlueMETER, and BlueMETER BASIC:

:sa hcus ,stinu gnirusaem suoirav ni seulav gnirusaem eht fo yalpsiD •

• µm/m, respectively mm/m with 3 decimals • Inches/10 inch • Milliradian • Degrees/Arcmin/Arcsec • mm/relative base length

detcennoc srosnes / stnemurtsni owt fo seulav gnirusaem fo yalpsiD •

detcennoc srosnes / stnemurtsni owt neewteb ecnereffid eht fo yalpsiD •

• Absolute / relative measurements

• Evaluation and storage of the zero-o�set of instruments/sensors connected

• Calibration of ZEROTRONIC-sensors

• Battery indicator

BlueMETER Sigma is a further enhancement of the BlueMETER and has been developed as an intelligent display unit for the following electronic inclination measuring instruments:• BlueLEVEL

• BlueCLINO and BlueCLINO High Precision

• MINILEVEL NT and LEVELTRONIC NT (by means of cables only)

• Clinotronic Plus

• ZEROMATIC

• ZEROTRONIC sensors

The following new functions and features distinguish the BlueMETER Sigma from the BlueMETER:• Large and very easy-to-read colour display

• Various colour pro�les can be chosen yalpsid-D2 lacihparg wen eht :elbaliava era sdohtem yalpsid suoiraV •

allows very interesting new applications

.ylsuoenatlumis deyalpsid eb nac stnemurtsni 4 ot pu fo seulav derusaeM •It can be chosen which instrument is displayed as A, B, C or D

:elbaliava era snoitpo gniwollof eht eromrehtruF •

• Display of the di�erence of 2 instruments (A-B) • Display of the di�erence of 4 instruments (A-B and C-D)

noitcerid-X ni B-A :cihparg-D2 a sa deyalpsid eb neht nac seulav ehT • and C-D in Y-direction

,tnemurtsni eht fo edis thgir eht no won era selbac eht rof srotcennoc ehT •allowing adjustment of the instrument to the optimal reading angle with a built-in bracket on the back

The 2D-display shows graphically the position of an object in space, respectively the change of its position and makes the information easily understandable. This facilitates substantially the alignment of e.g. a machine, truck or a reference plate.

WYLER BLUE SYSTEM DISPLAY UNITSWithout Wireless With WirelessData Transmission Data Transmission

Type of Display Code No Code NoBlueMETER 60-6502B 60-6502BWBlueMETER Basic 60-6502BB 60-6502BBWBlueMETER SIGMA 60-6502BS 60-6502BWSPowers Supply Unit 24V60-6508 60-6508

Swiss Precision

BlueMETER BlueMETER BASIC BlueMETER SIGMA

The BlueMETER, BlueMETER BASIC, BlueMETER SIGMA are intelligent digital display units developed for the inclination measuring instrument BlueLEVEL and the ZEROTRONIC sensors. Besides the excellent measuring accuracy, the BlueLEVEL instruments and ZEROTRONIC sensors supply a fully digital signal for transmitting over long distances without any loss of quality.

��

212

LEVELLING


Wyler Zerotronic - Digital Inclinometer Sensors

ZEROTRONIC Type 3• High resolution, high precision for inclinations u p to 10°

• Excellent signal-to-noise ratio

• Excellent repeatability

• Excellent linearity

• Excellent temperature stability

Some typical applications for the ZEROTRONIC Type 3 include those applications in which high precision and high resolution is �rst priority, and where only small inclinations are measured:

• Adjustment of machines (e.g. pitch and roll)

• Precise adjustment of absolute zero

ytud yvaeh a ni snoitanilcni llams fo tnemerusaem esicerP •environment; e.g. exposure to outside temperature

ZEROTRONIC Type C• Excellent precision for inclinations between 10° a nd 60°

• Excellent repeatability

• Excellent long-term stability in inclined position

• Excellent linearity

• Excellent temperature stability

Some typical applications for the ZEROTRONIC Type C include:

• Larger inclinations

revo noitisop denilcni ni sniamer rosnes eht hcihw ni snoitacilppA •a longer period of time

TECHNICAL SPECIFICATION - ZEROTRONIC SENSORZEROTRONIC-sensor Type 3 ZEROTRONIC-sensor Type C

Power consumption ZEROTRONIC-sensors ca. 70 mW ca. 100 mWPower supply Sensor 5 V ± 10 % 5V ± 10 %External power supply System T/C 12 ... 48 VDigital output RS485 / asynchr. , 7 DataBits, 2 StopBits, no parity

Baudrate (automatic adjustment) 2‘400 ... 115‘000 9‘600 ... 57‘600Analog output PWM 0.5 V ... 2.5 V ... 4.5 V

@ 5 V SupplyTemperature range Operating - 40 °C to + 85 °C

Storage - 55 °C to + 95 °CNet weight sensor 118gr 100grShock resistance practically indestructible

Swiss Precision

ZEROTRONIC SENSORSType of Sensor Zerotronic 0.5 Zerotronic 1 Zerotronic 10 Zerotronic 30 Zerotronic 60Measuring Range Type 3 +/- 0.5° +/- 1° +/- 10° +/- 30° +/- 60°Code No 60-6510 60-6511 60-6513 60-6514 -Measuring Range Type C +/- 0.5° +/- 1° +/- 10° +/- 30° +/- 60°Code No - 60-6511C 60-6513C 60-6514C 60-6515C

DIMENSIONS ZEROTRONIC SENSOR

ZEROTRONIC-sensor with triangular mounting surface ZEROTRONIC-sensor with rectangular mounting surface

��

213

LEVELLING


Wyler Zerotronic - Digital Inclinometer Sensors

The BlueTC is used as an interface for data transmission through a cable or wireless connection. To each BlueTC up to eight sensors may be connected. In total, the system can handle 64 units. Because every TC also uses one address, a total of 56 sensors can be connected (64 minus 8 BlueTC addresses). Analysis of measuring results utilising LabEXCEL software.

Swiss Precision

Standard con�guration for ZEROTRONIC sensors. The customer can view and record the sensor output signal using their own in-house software.

ZEROTRONIC sensors connected to a BlueMETER

Data transmission through cables

Connection to a PC/laptop through a T/C (Transceiver/Converter)

ZEROTRONIC sensors connected to a PC/laptop on RS485-Bus through one or more Transceiver/Converters (T/C). Analysis of measuring results using DYNAM or

LabEXCEL software. External power supply via Transceiver/Converter.

Data transmission through a wireless connection

Distance 2.5M

Distance 2.5M

Distance < 15M

Distance < 15M

Distance < 15M Distance < 15M

Distance < 15M

Distance < 1000M

Distance < 1000M

Distance < 1000M Distance 50-100M

Distance 50-100M

Distance < 15M

��

203

LEVELLING


Moore & Wright Engineers’ Levels

Features• Main vial sensitivity of 1 minute

• Each level is �tted with a main, cross and plumb vial

• Main vial protected by rotating shroud

lla rednu ytidiulf dna ruoloc sniatniam noitulos laiV •workshop conditions

noitacol rof evoorg eev htiw esab tsac dnuorg noisicerP •on cylindrical work

ELS

ELM

Features• Ultra compact dimensions and a single vial

• Machined from a solid block of carbon steel

• Supplied on retail card

Moore & Wright Mini Level

METRIC / IMPERIAL ENGINEERS’ LEVELSCode No Length Width Height ResolutionELS 165mm 34mm 46mm 0.3mm per metre

6.5" 1.34" 1.81" 0.0035" per footELM 310mm 36mm 58mm 0.3mm per metre

12.0" 1.42" 2.28" 0.0035" per foot

METRIC / IMPERIAL MINI LEVELSCode No Length Width Height AccuracyELT-001XR 65mm 20mm 38mm ± 1°

2.6" 0.79" 1.5" 0.0035" per foot

��

Documents

Levelling - Engineering | Machinerymachine-dro.co.uk/media/wysiwyg/mwcatalogue/Leveling.pdf · 205 LEVELLING Tel: 01992 455921 Partners in Precision Wyler Bubble Spirit Levels A widerangeof