Upload
others
View
3
Download
0
Embed Size (px)
Citation preview
thingslog.com (+359) 875 32 80 [email protected]
Level Monitoring
Level Monitoring Level monitoring is a solution for level and volume monitoring of non aggressive or aggressive fluids based on ThingsLog low power data loggers and specially designed Sensormatic submersible pressure sensors.
Applicable for
Features
Large levels and depths in drilling wells, dams
and other types of large ponds
Water and arqueous solutions
2
Network type: 2G, NB-IoT or LoRa/LoRaWAN
Fluid: water, non-aggressive liquids (water)
or aggressive fluids
Level of measurement: up to 100m*
(for >100m on special request)
Up to 100 m PVC hose/ventilated cable
For certain aggressive fluids:
• Up to 10 m copper hose (optional custom made)
• Up to 3m stainless steel (optional custom made)
Power supply options:
• Lithium batteries/Solar/24V
Output signal: 4 ÷ 20 mA (2-wire)
Reverse-polarity protection: YES
Fuels oil, diesel, biodiesel, petrol and petrol products-oil
Dense and viscous liquids
Basics, acids, liquid reagents
Organic and inorganic solutions
Other aggresive fluids
Working temperature: 0 ÷ 70 °C
Low / high level instant alarms
Ambient temperature: (-20) ÷ 40 °C
Accuracy: 0.5% for 100% of FSO
Electrical connection: ventilated cable
Probe diameter: 27 (30) mm
Probe material: stainless steel 304/316 L
Built-in stainless steel membrane 316 SS
Protection class: IP 68
ATEX sensor protection class for aggressive
fluids:
ThingsLogUser Interface
ThingsLogBackend
ThingsLogDatabase
Solution Description
How it Works
3
ThingsLogMobile APP
YourPlatform
GSM
NB-IoT
REST
Platform
Sensor Details
Sensor is submerged and positioned as close as possible to the bottom of the tank.
Depending of the type of the liquid there is ventilated/copper cable or stainless steel body
from the sensor to the data logger.
Data Logger Operation
The data logger wakes up on configurable interval of time, provides power supply to the
sensor, reads the measurement and records the reading in memory. On configurable
transmission interval logger wakes and transmits the recorded readings to the ThingsLog
platform. If the reading value leaves a pre-established range of low/high level thresholds
the logger wakes up and transmits an instant alarm. Alarms are forwarded to the subscribed
users through an email, mobile notification or an API message.
ThingsLog Platform Remote monitoring of water, gas, electricity,level, pressure and many other
Data management of meter / sensor readings
Consumption monitoring asa service
Data visualisation and analysis
Alarms and notifications
Device management and configuration
Battery and signal level monitoring
User friendly UI and app
REST API interface for integration with other platforms
Self documented REST API interface: https://iot.thingslog.com/swagger-ui.html
4
55
Additional Services Upon Request
Sensor customization
Professionalservices
Device pre-provisioningTraining
Third-party systems integration
1101 - 2G/GSM
1102 – NB-IoT
1102na – NB-IoT for North America
1103 – LoRa/LPWAN for Europe
1103na – NB-IoT for North America
XXXX (NETWORK TYPE) DESCRIPTION
6K data transmissions
10K data transmissions
10K data transmissions
868 MHz, 10K data transmissions
915 MHz, 10K data transmissions
Level MonitoringOrdering Codes
6
LMDL (Level Monitoring Data Logger) order code taxonomy
LMDL-XXXX-YYY-F-CL-PS
YYY (RANGE CODE) RANGE YYY (RANGE CODE) RANGE
201
202
203
204
205
206
207
301
302
303
304
305
306
307
0 - 100 mm
0 - 250 mm
0 - 300 mm
0 - 400 mm
0 - 500 mm
0 - 600 mm
0 - 800 mm
0 - 1 m
0 - 2 m
0 - 3 m
0 - 4 m
0 - 5 m
0 - 6 m
0 - 7 m
308
309
401
402
403
404
405
406
407
408
409
410
5xx
0 - 8 m
0 - 9 m
0 - 10 m
0 - 20 m
0 - 30 m
0 - 40 m
0 - 50 m
0 - 60 m
0 - 70 m
0 - 80 m
0 - 90 m
0 - 100 m
0 - custom
Delivery Terms
Package
30 Working Days for 10+ QTY
10 Working Days for a samples
EXW
Each level monitor is offered with a submersible pressure transmitter, cable with 1m extra length (by default), batteries and 1 year ThingsLog Platform subscription. ThingsLog mobile app is free of charge.
7
F - Fluid Types
1 – Non aggressive fluids (Water)
2 – Aggressive fluids with ATEX
CL - Excessive cable length
01 – 1m (default option)
02 – 2m
..
PS - Power Supply
11 – Low power with lithium battery pack (200000 sensor readings)
22 – Solar
33 – 24 VDC
44 – Custom
An example order code for a 2G GSM low power water level monitor for 4 meter deep tank
level with 1 meter extra cable length is:
LMDL-1101-304-1-01-11
Same with NB-IoT would be:
LMDL-1102-304-1-01-11
8
Subscription packages count for all customer’s data loggers, e.g one subscription package spans across many loggers
Package options are:
ThingsLog PlatformSubscriptionSubscription packages are reading based
A reading is one digit read from a meter or sensor
10k 100k 1M 10M 100M
10 thousands readings per year
100 thousands readings per year
1 million readings per year
10 million readings per year
100 million readings per year
If you don’t see your package don’t hesitate to ask for a custom option on
10K
100K
1M
10M
100M
10 000
100 000
1 000 000
10 000 000
100 000 000
SUBSCRIBTION PACKAGE NUMBER OF READINGS
ThingsLog Mobile AppLevel monitoring has never been so easy!
Monitor your level on your phone and get instant notifications if level value leaves a pre-established
range of low/high level thresholds.
9
How to Calculate Platform Subscription
How to Order
100
100
15 minutes
1 hour
4 readings per hour96 readings per day
35040 readings per year
24 readings per day8760 readings per year
3504000
876000
Between 1M and 10M
1M package
NUMBER OF DEVICES
READING INTERVAL READINGS TOTAL READINGS PROPER PACKAGE
Step 1.
Choose the right data logger for your business case
Step 2.
Define your initial subscription package
Step 3.
Send us a purchase order [email protected]
LORA
10