• Home

  • Documents

  •  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this...
58

 · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical

  • Upload
    others

  • View
    1

  • Download
    0

Embed Size (px)

Citation preview

Page 1:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 2:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 3:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 4:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 5:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 6:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 7:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 8:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 9:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 10:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 11:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 12:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 13:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 14:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 15:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 16:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 17:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 18:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 19:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 20:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 21:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 22:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 23:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 24:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 25:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 26:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 27:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 28:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 29:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 30:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 31:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 32:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 33:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 34:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 35:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 36:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 37:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 38:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 39:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 40:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 41:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 42:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 43:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 44:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 45:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 46:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 47:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 48:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 49:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 50:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 51:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 52:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 53:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 54:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 55:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 56:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 57:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical
Page 58:  · Let's say a component is rated 2A at 400 C and has absolute maximum rating of 5A Is, this indicates that transient overcurrent up to 5A is permitted for 1 second. If an electrical

Effective: September 2000 Type IRV Directional Overcurrent ... · Directional Overcurrent Relay Mechanically, the directional unit is composed of four basic components: A die-cast

Effective: September 2000 Type IRV Directional Overcurrent ... · Directional Overcurrent Relay Mechanically, the directional unit is composed of four basic components: A die-cast

Documents
11- Overcurrent Protection

11- Overcurrent Protection

Documents
OVERCURRENT RELAYS

OVERCURRENT RELAYS

Documents
Overcurrent Example

Overcurrent Example

Documents
Time overcurrent relay - Corona Group IDMT Relays Catalogue.pdf · The digital time overcurrent relay IRI1 is a universal protection device for low, ... • One-step time overcurrent

Time overcurrent relay - Corona Group IDMT Relays Catalogue.pdf · The digital time overcurrent relay IRI1 is a universal protection device for low, ... • One-step time overcurrent

Documents
5a Planetary Interiors. 5a Minerals 5a 5a Isostacy

5a Planetary Interiors. 5a Minerals 5a 5a Isostacy

Documents
Setting Phase and Ground Overcurrent Levels the overcurrent condition is present for the duration of the timer, the switch control records a Phase Overcurrent Fault state. To determine

Setting Phase and Ground Overcurrent Levels the overcurrent condition is present for the duration of the timer, the switch control records a Phase Overcurrent Fault state. To determine

Documents
Overcurrent Protector - Siemens · PDF fileThe Overcurrent Protector (OCP) is an additional device connected between the rectifier/regenerative feedback unit (R/RF unit)

Overcurrent Protector - Siemens · PDF fileThe Overcurrent Protector (OCP) is an additional device connected between the rectifier/regenerative feedback unit (R/RF unit)

Documents
SPAJ 135 C Combined overcurrent and earth-fault …...3 The combined phase overcurrent and earth-fault relay SPAJ 135 C is intended to be used for time and current graded overcurrent

SPAJ 135 C Combined overcurrent and earth-fault …...3 The combined phase overcurrent and earth-fault relay SPAJ 135 C is intended to be used for time and current graded overcurrent

Documents
Controller InteliGenNT InteliGenNT NTC BaseBox ...retrofit.com.ua/public/content/datasheets/datasheet_is-ntc-bb.pdf · Current measurement 3ph + 1 / 6w IDMt overcurrent 5A 3ph + 1

Controller InteliGenNT InteliGenNT NTC BaseBox ...retrofit.com.ua/public/content/datasheets/datasheet_is-ntc-bb.pdf · Current measurement 3ph + 1 / 6w IDMt overcurrent 5A 3ph + 1

Documents
OverCurrent Tutorial

OverCurrent Tutorial

Documents
basebox intelisys InteliGenNTC · PDF fileCurrent measurement 3ph + 1 / 6w IDMt overcurrent 5A 3ph + 1 / 6w IDMt overcurrent 5A ... IGs-NT-lsm + Pms dongle: • Enables Multiple isolated

basebox intelisys InteliGenNTC · PDF fileCurrent measurement 3ph + 1 / 6w IDMt overcurrent 5A 3ph + 1 / 6w IDMt overcurrent 5A ... IGs-NT-lsm + Pms dongle: • Enables Multiple isolated

Documents
€¦ · IDMTL OVERCURRENT RELAY Based on digital microprocessor technology, the MH ROA207n is designed as a universal overcurrent protective relay, integrating selectable time overcurrent

€¦ · IDMTL OVERCURRENT RELAY Based on digital microprocessor technology, the MH ROA207n is designed as a universal overcurrent protective relay, integrating selectable time overcurrent

Documents
Transformer Overcurrent Protection Coordinationrelayman.org/papers/Transformer Overcurrent Protection Final Final 2015.pdf · Transformer Overcurrent Protection Coordination Russell

Transformer Overcurrent Protection Coordinationrelayman.org/papers/Transformer Overcurrent Protection Final Final 2015.pdf · Transformer Overcurrent Protection Coordination Russell

Documents
SEL-551/SEL-551C Overcurrent and Reclosing Relay · SEL-551/SEL-551C Overcurrent and Reclosing Relay ... Phase, ground, and negative-sequence overcurrent protection US and IEC time-overcurrent

SEL-551/SEL-551C Overcurrent and Reclosing Relay · SEL-551/SEL-551C Overcurrent and Reclosing Relay ... Phase, ground, and negative-sequence overcurrent protection US and IEC time-overcurrent

Documents
Type CO Overcurrent Relay - ElectricalManuals.net Relays... · Overcurrent Relay 1.0 APPLICATION The CO relay is a single phase non-directional time ac overcurrent device. It is used

Type CO Overcurrent Relay - ElectricalManuals.net Relays... · Overcurrent Relay 1.0 APPLICATION The CO relay is a single phase non-directional time ac overcurrent device. It is used

Documents
Electrical - Microsoft · PDF fileElectricity is tricky because it is invisible, ... R = Resistance, ... OVERCURRENT The fancy name for circuit breakers and fuses is overcurrent protection

Electrical - Microsoft · PDF fileElectricity is tricky because it is invisible, ... R = Resistance, ... OVERCURRENT The fancy name for circuit breakers and fuses is overcurrent protection

Documents
Advanced wind turbine protection and control system€¦ · Phase, neutral, ground and sensitive ground overcurrent • Negative sequence overcurrent • Directional overcurrent •

Advanced wind turbine protection and control system€¦ · Phase, neutral, ground and sensitive ground overcurrent • Negative sequence overcurrent • Directional overcurrent •

Documents
Overcurrent relays2011-2

Overcurrent relays2011-2

Documents
Directional Overcurrent Relaying (67) Concepts · Abstract – Directional overcurrent relaying (67) ... relay to respond differently for faults in the ... Directional overcurrent

Directional Overcurrent Relaying (67) Concepts · Abstract – Directional overcurrent relaying (67) ... relay to respond differently for faults in the ... Directional overcurrent

Documents
Directional three-phase overcurrent protection function ... · 1 Directional three-phase overcurrent protection function ... the vectors is within the setting ... three-phase directional

Directional three-phase overcurrent protection function ... · 1 Directional three-phase overcurrent protection function ... the vectors is within the setting ... three-phase directional

Documents
Example QuickCMC Overcurrent

Example QuickCMC Overcurrent

Documents
in-vehicle infotainment system - Rimac Automobili · • Overcurrent, Overvoltage and ESD protection • Maximum output current 5A • Each GPIO is IO selectable > can • Speed up

in-vehicle infotainment system - Rimac Automobili · • Overcurrent, Overvoltage and ESD protection • Maximum output current 5A • Each GPIO is IO selectable > can • Speed up

Documents
Busbar Protection IED - Toshiba Overcurrent protection (option) Independent voltage check element ... APPLICATIONS PROTECTION ... Backup overcurrent protection is …

Busbar Protection IED - Toshiba Overcurrent protection (option) Independent voltage check element ... APPLICATIONS PROTECTION ... Backup overcurrent protection is …

Documents
Directional / non Directional Overcurrent Protection P12xy ...conditions, up to eight independent setting groups are provided. 1A and 5A dual rated CT inputs are available with all

Directional / non Directional Overcurrent Protection P12xy ...conditions, up to eight independent setting groups are provided. 1A and 5A dual rated CT inputs are available with all

Documents
Type CO Overcurrent Relay€¦ · Overcurrent Relay 1.0 APPLICATION The CO relay is a single phase non-directional time ac overcurrent device. It is used to sense current lev-el above

Type CO Overcurrent Relay€¦ · Overcurrent Relay 1.0 APPLICATION The CO relay is a single phase non-directional time ac overcurrent device. It is used to sense current lev-el above

Documents
earth fault & overcurrent relays - THEGIOIDIEN.COM Control... · Combined Overcurrent / Earth Fault RelayCombined Overcurrent / Earth Fault RelayEarth Fault Relay and Voltage Monitoring

earth fault & overcurrent relays - THEGIOIDIEN.COM Control... · Combined Overcurrent / Earth Fault RelayCombined Overcurrent / Earth Fault RelayEarth Fault Relay and Voltage Monitoring

Documents
Overcurrent Protection

Overcurrent Protection

Documents
Digital 3-phase Overcurrent & Ground Overcurrent & Unbalance … Digital 3-Phase Overcurrent & Ground Overcurrent & Unbalance Current Relay (GD31-AB17) User's Manual V1.10 2 / 131

Digital 3-phase Overcurrent & Ground Overcurrent & Unbalance … Digital 3-Phase Overcurrent & Ground Overcurrent & Unbalance Current Relay (GD31-AB17) User's Manual V1.10 2 / 131

Documents
Siprotec 7ST61 / 7ST63 - Siemens_control_and... · tection relay Siprotec® 7ST61 / 7ST63 is a ... Distance protection Time overcurrent protection Emergency time overcurrent protection

Siprotec 7ST61 / 7ST63 - Siemens_control_and... · tection relay Siprotec® 7ST61 / 7ST63 is a ... Distance protection Time overcurrent protection Emergency time overcurrent protection

Documents