Let’s connect you.The Telkom Easy Guide to set up your PACE Router.

First, unpack your new router.

Your Pace Router

The quick reference guide

2 telephone cables

1 power supply cord

1 LAN cable

1 DSL splitter

1 DSL filter

11

2

2

3

3

4

4

5

5

6

6

7

7

Let’s get started.

Switch your router on by pressing the power button at the back of the router.

Your telephone now plugs into the green socket marked Phone on the DSL splitter.

Plug the short end of the DSL splitter into the

telephone jack on the wall

Plug the yellow LAN cable into the yellow port on the back of the router, and the

other end into the LAN port on your computer.

Plug one grey cable from the power supply port and into the grey port on the back of the router marked DSL.

Connect the 12vDC power supply into your

router and into apower socket.

Insert the small gray plastic foot into the router at the base.

Take the second grey cable and plug it into the other port on the power supply and the other end into red socket marked DSL on the DSL splitter.

3

2

7

8

1

4

5

6

Ready to go.

The Wi-Fi light will be green if Wi-Fi is enabled.

The internet light will also be green if the account is active.

All of these lights can flash as data is transferred.

The Broadband light must stay green. If this is flashing it means that no connection is synced with exchange.

!

5

4

The Ethernet light must be green if the LAN cable is plugged in.2

3

The power light must turn green and remain stable.1

Setting up your Router.

Open your internet browser and go to http://10.0.0.2 and click Enter. Type in admin for both the username and password and click Enter.

Click Router then Internet from the left hand navigation.

Scroll down to PPP parameters and now type in your ISP Login and password. You will have received these login details via SMS. Click OK. The Internet LED on the front panel of your modem will now turn green.

1 2 3

In the Wi-Fi Configuration page click on Wi-Fi and, scroll down to SSID 1 Wi-Fi parameters.

Change the Wi-Fi SSID to your preferred Wi-Fi name.

Under the Security ensure WPA/WPA2 is selected for the highest Wi-Fi security level.

In the Password field type in the password of your choice. Scroll down to the bottom of the page and click on OK.

The router will now change to these settings and if you are connected to the router via Wi-Fi you will have to now log on using the new credentials.

It is important to log out properly by clicking Logout, and not just shutting down your browser window.

Activate your account by opening your web browser and typing in www.telkom.co.za/verifyadsl to the address field. Press Enter. Complete the fields with your telephone number and order number. Click on Submit.

4 5 6

Last fewsteps.

No connection?Don’t panic...

Plug your dongle into the back of the router.1

Setting up your Dongle.

Open your internet browser and type in http://10.0.0.2 and click Enter. Type in admin as your username and your new password, if you changed it. Otherwise use the default admin password and click Enter.

Click Router then Internet from the left hand navigation.

Scroll to the bottom of the page, and click Enabled under 3G parameter.

1 2 3

If your SIM card requires a pin, enter the Pin Code and click OK. Your 3G failover is now set up, and you can Logout.

4

Laststep.

Done.You’re connected.If you still need help call us on 10210.