LET’S GET THE JOB DONE · 2016-01-04 · catnic is again, one step ahead and has an experienced team of feature design engineers dedicated to providing innovative design solutions

LET’S GET THE JOB DONE

LINTEL

S

GRA0019_Lintels_FC_02_AW_SPLIT_02

LINTELS FC

N/A

CHRISTIAN

297x210

11 December 2014 11:56 AM

shared:Studio:Clients:Grafton_PLC:GRA019_Civils_Lintels_Catalogue:Artwork:GRA0019_Lintels_FC_02_AW_SPLIT_02.indd

1

1 LAYOUT / ARTWORK

NATIONWIDE COVERAGE

www.lintels.co.uk

Over 55,000 Steel andCOnCrete lintelS in StOCk

the largeSt natiOnallintel diStributOr

Over 100 vehiCleS aCrOSSthe uk, Offering a 48 hOurdelivery ServiCe

NatioNal SaleS team

95091_BuildbaseLintels_Brochure_2014.qxp_. 09/12/2014 15:46 Page 2

COntentS

civils & lintels are the uk’s largest Steel linteldistributor dedicated to servicing the constructionindustry through a partnership with five brand leaders– Birtley, catnic, iG, keystone & Naylor.

recognised as one of the nations industry leadingspecialists we bring to the consumer expert productknowledge throughout all our branches and qualityproducts at a competitive price.

With enthusiasm we aim to provide the best service in theindustry, our dedicated teams are constantly helping usfind ways to improve the customer’s experience, helpingthe developer to save both time and money.

established in 2006, from the amalgamation of a.rhendricks, hendricks lovell, Cooper Clarke, Willis builders Merchants, dunpark and Warrington Slate,today Civils and lintels has doubled in size.

lintels

harvey’s bespoke lintels 2

birtley lintels 4

Catnic lintels 6

ig lintels 10

keystone lintels 12

keystone & ig hi-therm lintels 13

fP McCann floor beams 16

naylor ultrafire lintels 16

naylor Concrete 17

roof Windows

keylite 18

doors

birtley 19

Brickwork

bricks & blocks 20

ig windposts 21

expamet 22

Securiframe Structural Closers 24

CPi euromix Mortar 24

thermabate Cavity Closer 25

timloc acoustics 26

ruberoid dPC & Cloaks 28

ancon Wall ties 30

Xtratherm insulation 31

knauf insulation 34

lintel Conversion Chart 36

Our Service Offer 37

depot location – back Cover 38

www.lintels.co.uk

This addition supersedes all previously published Buildbase Lintels product guides, correct at the time of print December 2015. For a full set of our T&Cs please visit our website www.lintels.co.uk or contact our Head Office: 0845 470 7100

coNteNtS < 1


the ultimate lintelsthe lintray is a stainless steel lintel with weldedstop ends and end plates. it can be installed aseasily as any other lintel. it costs about the sameas an equivalent collection of galvanised lintel,plastic cavity tray and stop ends with a far superiorlong term performance.

it’s also very forgiving when it comes to installation, compared withthe problems of fixing plastic stop ends in cold, damp weatherwhen the site operatives are working in difficult conditions.

Windpost and lintel Systemthere are a full range of windposts, manufactured from Stainlessand galvanised steel. lintels are supplied with adjustable end platesconnecting windpost to lintel producing an effective steel trellis.

this system is indispensable where expansion joints produceunrestrained wall areas between windposts.

Windposts are produced with a full range of head and base fixings.

roller Shutter lintel SystemShutter lintels are manufacturedusing all our standard lintel sections.

www.lintels.co.uk2 > liNtelS


Stainless Steel lintels rangeWe offer a choice of four stainless steels but most of thetime we recommend ldX 2101®

304 Stainless Steel has historically been the material of choice for durabilityand exceptional corrosion resistance with no reliance on a surface coating.

What is ldX 2101® Stainless SteelldX 2101® Stainless Steel is a modern duplex (austenitic-ferritic) materialparticularly well suited to use in buildings, particularly lintels. Offering bettercorrosion resistance and 2.3 x the strength of 304 lintels.

reasons to chooseStainless Steel:

Corrosion resistant is uncompromised bywelding

exceptional corrosion resistance ensures a practically unlimited life span

Minimal or zero maintenance costs

no paint, zinc or chemicals

On-site modifications do not affectcorrosion resistance

fully recyclable at the end of building life

no coating to be damaged by roughhandling

Correct specifications provides a neatarchitectural finish

eurocode 1996-2 now states that all lintelsspecified for ‘higher’ exposure areas mustbe made of stainless steel – this includescoastal regions, industrial areas and alsobuildings in the vicinity of roads subject togritting.

bS 5628-3:2005 requires lintels installed inbuildings over 3 storeys high also be ofstainless steel (due to exposure to theelements).

the advantages of ldX 2101®:

Over double the strength of 304

Superior corrosion resistance to 304

Better price stability than 304

Similar in price to 304

It is magnetic = easy handling & recycling

Also making it less attractive to thieves

Duplex is now explicitly listed in BS EN 845-2:2013

Aesthetically pleasing brushed finish

liNtelS < 3www.lintels.co.uk



Steel lintels fully hot-dip galvanised after manufacture

Supergalv lintels are available with the ultragalv 2000 (u2k) corrosion protection system whichprovides 150 micron zinc coating thickness. for the highest level of corrosion protectionSupergalv lintels can be fabricated from stainless steel 1.4301 (bSen10088-2).

Corrosion Protection – coating thickness of 65uM which surpasses the corrosion protection offered by other lintel manufacturers

Zinc Coated – cut edges and welds

thermal efficiency – the design of birtleys standard cavity lintels contributes significantly to reduce cold bridging by eliminating the base plate

extensive range – suits every requirement

Quality recognition – widely used and valued throughout the uk building industry

(for closed eaves applications)

cavity Wall lintels(for cavities 50mm – 150mm)

external leaf lintels

internal Wall lintels(for single leaf, non load bearing walls)



custom options – adapted to suit particular applications

cP NmNd

Special lintelsWhen the building design demands something out of the ordinary,Supergalv lintels can be custom-designed and manufactured to suit a wide variety of opening shapes, dimensions and loadings. typical special applications include:

Where the inner leaf of a cavitywall is fair-faced and the innerflange of the lintel is notplastered, the plaster key on thisflange can be omitted.

to minimise the mortar bedthickness at the end bearings,the weather drip on the frontflange of the lintel can beomitted.

apex lintels

arch lintels

Cant brick lintels

Corner lintels

Corner window support system

Curved on Plan lintels

extra heavy duty lintels

extra long span lintels (to 9.5m)

roller shutter lintels

Where the underside of the lintel iscompletely exposed, a closer platecan be welded prior to galvanising toprovide a neat, aesthetically pleasingfinish to the soffit of the lintel


Special lintels

Typical applications showing semi-circular arched lintel in facing brickwork

When a building requires a moreunconventional support solution, catnic is again, one step ahead and has an experienced team of feature designengineers dedicated to providing innovativedesign solutions to achieve the architect’s vision.

archesWhen you want to make a feature of brickwork you mayneed more than a standard lintel, so Catnic offers bothstandard and innovative bespoke designs.

Standard arch lintelsCatnic have a standard range of 10 semi-circular archesspecifically designed and manufactured for domestichousing applications with nominal loadings. these archesoffer considerable flexibility for feature brickwork withclear spans ranging from 600mm to 1200mm.

Semi-circular arch lintelthe semi-circular arch lintel is the most common featurebrickwork opening providing a classical design line forany window or door. Catnic have 10 different size semi-circular arch lintels available from stock.

ace of clubs arch lintelthe ace of clubs arch lintel enables the architect tofashion a unique window opening that will create theultimate feature for any room. the ace of clubs arch isformed from three radii that can be equal or with thecentre arch being greater than the other two.



corner lintel

the mitre and welded corner lintelenables the appearance of anunspoiled window openings on twoperpendicular walls of a room.Corner lintels come complete withsupport posts (spigot post) andbase plate. Support posts areavailable in standard lengths toallow for site cutting to actualrequirements.

curved on Plan lintel

the curved on plan lintel (sometimes)known as radius or bow lintel enablesthe creation of curved wall withopening. Curved lintels can bemanufactured to suit customerspecified radii.

elliptical arch lintel

the elliptical arch lintel enables thecreation of a wider, shallower archopening compared to that offeredby the traditional steeper semi-circular arch. the elliptical arch isformed by multiple arcs each ofwhich is drawn from its own centrecompared to a roman arch which isa semi-circular arc drawn from asingle centre point.

Gothic arch lintel

the gothic arch lintel enables thecreation of pointed window anddoor openings to complimentstrong vertical lines, high vaultedceilings, minimal wall space andbuttressed walls often found invictorian and gothic architecture.gothic or pointed arches areformed from two segmentedarches leaning together to form a point.

Parabolic arch lintel

the parabolic arch lintel enablesthe creation of openings with anartistically distinctive softercurvature than offered by atraditional elliptical or gothic arch.the parabolic arch is formed bythe creation of an arch in the formof the intersection of a cone with aplane parallel to the side of thecone, like a three-centred arch.

Segmental arch lintel

the segmental arch lintel enablesthe creation of an opening wherethe arch whose profile comprisesan arc smaller than a semicircle.the segmental arch is made up ofa part of a circle, the centre ofwhich is below its springing line.

Splayed Bay lintel/SplayedBay lintel with Bearings

the splayed bay lintel with bearingsprojects the wall forward from theconfines of the rest of the room tocreate an opening that attempts tomake use of every last ray ofsunshine. introduced during thegeorgian period, made popular invictorian times and carried on inedwardian housing the bay windowis a realisation by architects thatwindows with three aspects couldimprove the outlook of living rooms.

Square Bay lintel

the square bay lintel usesperpendicular returns (90° angle)compared to the splayed bay lintel(greater than 90° angle) to create awindow opening with threeaspects. Square bay lintels comecomplete with support posts(spigot post) and base plate instandard lengths to allow for sitecutting to actual requirements.



Juliet BalconiesNamed after the famous balcony scene from Shakespeare’sromeo and Juliet the shallow balcony is designed to provide asafety barrier in front of french windows.

Juliet balconies are ideal for:

apartments

hospitals

housing developments

nursing homes

Schools

Student accommodation

three storey houses

Standard designs

the standard range of Juliet balconies offersthree classical balcony designs available tochoose from.

Standard Sizes

Catnic standard range of Juliet balconies areavailable in width increments of 100mm from1200mm to 3000mm.

Brecon

monmouth


usk


Universal Beams (UB)

Height (mm) Width (mm) Weight (Kg/m) Price (£/m)

178

203

254

102

133

146

19

23

30

43

Universal Columns (UC)


152

203

254

152

203

254

23

30

46

73

Channels (PFC)


230 90 32

When loading conditions exceed our standard range of lintels Catnic offer a selection of Steelwork beams, columns and channels.

ork

Steelwork

universal Beams (uB)

When loading conditions exceed our standard range of lintels catnic offera selection of Steelwork beams, columns and channels.


178203203254

102102133146

19233043

P.O.A.P.O.A.P.O.A.P.O.A.

universal columns (uc)

channels (Pfc)

Height (mm) Width (mm) Weight (Kg/m) Price (£/m)152152203254

152152203254

23304673

P.O.A.P.O.A.P.O.A.P.O.A.

Height (mm) Width (mm) Weight (Kg/m) Price (£/m)230 90 32 P.O.A.

Steelwork can be supplied plotted and banded with your lintels.

Manufactured from grade S275 steel plate, all steelworksections are supplied cut to length with holes drilled asrequired. a primed finish is offered as standard with hot dippedpost galvanised finish available on request.



fire Performanceig lintels have been subjected to a fire test (ref:WarreS no. 101263) in accordance with bS 476:Part20: 1987, at exova Warringtonfire and achieved aone hour fire performance.

Galvanised Steelig’s standard range of lintels are manufactured fromhigh quality grade pre-galvanised mild steel to bS en10346:2009 dX51d plus 2600 or grade Z275 to bSen10025-2:2004 with minimised spangle finish and amaximum yield stress of 250n/mm2.

Stainless Steelall ig Stainless Steel lintels are manufactured fromaustenitic Stainless Steel, grade 304 2b to bS en10088- Part 2 astm 240 (european grade 1,4307).

Structural Performancethe structural performance have been ascertained bytesting in accordance with the requirements ofstandards bS 5977 Part 2 1983 and bS en 845-2:2003.

thermal Performanceall ig standard lintels satisfy the thermal performancerequirements of england and Wales’ Part l of thebuilding regulations, northern ireland’s Part f andScotland’s technical handbook, section 6.

lintel types: l1/S 50, l1/S 75,l1/S 100, l1/hd 50, l1/hd75, l1/hd 100, li/S 5O Wil 215, l1/S 75 Wil 25, l1/S100 Wil 215, l1/S 110, l1/S 130, l1/S 150, l10, l7, l11,l8/rb, l1/tJ, int 100, l9, ibeaM, l1/e 100, l5, l6 havebeen tested as a composite unit with surroundingmasonry, built in accordance with bS en 1996-2:2006

Polystyrene insulationig’s lintels are insulated with expanded CfC-freepolystyrene and conform to bS 13163: 2008.

lintel life Spanthe ig lintel range complies with the technicalrequirements of the blP (building life Plans) regardingthe durability data of mild steel, cold formed lintels.

Standard lintel Performance

Standard ig lintel – with patented non-continuous thermal break Plate

ColdOuter leaf

thermal break Plate

Warminner leaf

10% Contact Only

thermal break i.e. nocontact



arch lintels

Brick Slip feature lintelsig provide a technically advanced solution for an extensiverange of brick slip installations including arches, panels,soffits and architectural features.

radius arch lintels

Customised to your requirements

Precision cut bricks

load bearing lintel

for fast build programmes

Optional brick clad soffit

Optional centre stone feature

Optional insulation

Gothic arch lintel

Parabolic arch lintel

Natural arch lintel



apex Sun lounge lintels

Bow Sun lounge lintels

ridge Beam cradle

Square Bay Sun lounge lintels

Standard Sun lounge lintels

Sun lounge lintels range

Standard keystone lintel – with patented thermal break Plate

Galvanised Steel

keystone’s standard range of lintels are manufacturedfrom high quality grade pre-galvanised mild steel to bSen 10346:2009 dX51d plus Z600 or grade Z275 to bSen10025-2:2004 with minimised spangle finish and aminimum yield stress of 250n/mm2.

lintel life Span

the keystone lintel range complies with the technicalrequirements of the blP (building life Plans) regarding the durability data of mild steel, cold formed lintels.

Polystyrene insulationkeystone lintels are insulated with expanded CfC freepolystyrene and conform to bS 13163: 2008.

keystone Standard lintels cover a range of standard fittings in Hi-therm,Galvanised Steel and Stainless Steel for all construction purposes.

ColdOuter leaf

thermal break Plate

Warminner leaf

10% Contact Only

thermal break i.e. no contact

ColdOuter leaf

thermal break Plate

Warminner leaf

Standard keystone lintel withpatented non continuous thermalbreak Plate

NON

CONTINUOUS

THERMAL

BREAK PLATE



lintels


the single most cost effective solution for:

reduced carbon emissions

improved fabric energy efficiency

up to 5 times more thermally efficient than a standard steel lintel

the lintel solution to assist housebuilders meet:

Part l 2013 compliance

code of sustainable homes level 4-6

Hi-therm lintels

“the fabric energy efficiency ofour buildings is increasinglyimportant to us due to changesin building regulations and hitherm provided a cost effectivesolution for improving theenergy efficiency of ourdevelopment.”

Quinton HurdidgeCommercial & Procurement Manager,Penny farthing homes


Brick Slip feature lintels

Brick Slip Soffit Solutions

Brick Slip arch Solutions

keystone Brick Slip feature lintels are aone piece, prefabricated unit with factoryapplied brick slips.

units are manufactured bespoke to order and canachieve even the most challenging architectural designs.

keystone brick Slip feature lintel benefits:

Customised to your requirements

Precision cut bricks

load bearing lintel

lightweight for fast build programmes

Optional brick clad soffit

Optional centre stone feature

Optional insulation

keystone offer a range of brick slip soffit solutions with abespoke design and technical service. by combining ourQwik-fix angle masonry support system with bespokesteel components we produce single and double sidedsoffit systems which are ideal for runs of any length.

this versatile approach can adapt to suit the particularbuilding frame and in each case Qwik-fix offers a highlypractical solution on site. Soffit solutions utilise bd13bricks with a faced base. Bespoke Brick Slip

Solutions

Perforateddesignallows theadhesive topassthrough thesteelwork

the adhesive‘mushrooms’form amechanical lockon the innerside of the steel

brick slips arebedded in a highperformance bbaapprovedadhesive Brick Slip Panel Solutions


keystone specialise in producing brick slip archsolutions for both domestic and commercialapplications. arches of up to 12m span have beenproduced therefore eliminating the brick cuttingprocess on site.


cavity traysthe keystone cavity tray presents alightweight, simple to install and long-lastingsolution to preventing dampness frompenetrating below the roof line.

Stainless Steelkeystone’s full range of lintels is also available in stainlesssteel providing the same high quality and performancefeatures as our standard galvanised lintels.

Benefits:flexible: three sizes cover all roof pitches, cavity widths up to 100mm andbuilding materials.

off-the-shelf: Pre-creased, flat-packed and easily hand-folded on-site.

robust: impact, tear and abuse resistant to last the lifetime of your building.

compliant: Meets all current building regulations and nhbC requirements.

economic: the most cost-effective Cavity tray system available.

durability: resistant to acid, alkali and sulphate.

the use of stainless steel is ideal when the life expectancy andmaintenance of a building are key design considerations because ofits outstanding anti-corrosion properties.

Product informationall keystone stainless steel lintels are manufactured from austeniticstainless steel, grade 304 2b to bS en 10088- Part 2 astm 240(european grade 1.4307).

upon request, other grades of stainless steel lintels are available.

all keystone stainless steel lintels are made to order, specific toeach application.

all standard stainless steel lintels from keystone are bba approved.

Special lintels are also available in stainless steel, made to order




for the ultimate fire Protection– you need the ultimate lintel

Naylor ultra-fire range provides ultra fire Protection.

Naylor lintels has developed a new and innovativerange of lintels that can offer 90 minutes fire rating ona 100mm wide pre-stressed concrete lintel and 240minutes fire protection on 140mm and 215mm widepre-stressed concrete lintels.

this will place naylor lintels in a unique position as the firstlintel manufacturer to have developed a lintel that cancomply with bS8110 and will solve many problems forarchitects and engineers alike.

the lintels have been used on developments in Manchesterand have been specified on Paradise Street in liverpool.they are also attracting interest from edf energy andmany other architects and engineers who are excitedabout now having a solution to building design and safety.

Beam & block flooring

150mm (wide & narrow) and

225mm deep beams available


Naylor Specialist lintels range

Hi-Spec range chemi-Spec range Specials range

fair-faced range colour-Spec range ultra-fire Spec range

fire-Spec range faced fire range

Padstone range

easi-Wall range Bollards

l-Strip range



www.lintels.co.uk18 > roof WiNdoWS

roof Windows

key features

With the very latest thinking in design, engineeringand materials, keylite has created a new innovativeproduct range.

designed to compliment every architecturaldesign, our engineers have created strikinglysimple aesthetics on top of intelligent innovationsand clever engineering.

one piece bottom apronthe unique one piecebottom apron designimproves aesthetic finishand allows for easyinstallation

Ventilation handlethe ergonomicallydesigned control handleprovides simple andcomfortable opening ofboth the window andventilation flap

top quality timberMulti-laminated pine isused for increasedstrength and everlastingaesthetics. all timberundergoes a vacuumimpregnation preservationtreatment

engineered timber finishWith multiple coats ofclear satin lacquerresulting in an attractiveand stain resistant surface

maintenance-freesurfacesenhanced external flashingaesthetics. all aluminiumflashings incorporate apolyester powder coatedfinish giving enhancedprotection from theelements and uv rays

improved ventilationsystem

all weather ventilationkeylite’s standard 780mmwide roof window is theonly window of this sizethat satisfies the

requirement on trickleventilation into a room (asset out in ‘Part f’ of thebuilding regs.) with thewindow fully closed andsecurely locked

Ventilation filterthe built-in keylite insectfilter ensures only cleanfresh air passes into theroom

keylite blindslarge selection of blindsavailable

Glazing specificationkeylite roof Windows can be supplied with a rangeof glazing variantsincluding thermalproperties, tinted, frostedand self-cleaning glass

integral blind (optional)the blind is inside theglass and is unique to keylite.

maintenance-free hingethe hinge, being the most vital component of thewindow, is the onlyoperational part that moves. keylite haseliminated themaintenance requirementof this component

Sash hinge finger springsunique patent to keylite, the sash hinge finger spring allows the sash to be installed back into theframe in one smootheffortless motion.


High Performance residential doorsour high performance GrP composite doors combinesuperior traditional wood aesthetics with lowmaintenance technology.

grP doors will not warp, crack, splinter, dent or rust, yetretain the warmth and traditional look of real woodwithout the disadvantages.

birtley grP doors are constructed by bonding impactfibreglass (grP) outer skins to composite rails surroundingan inner core of highly thermally efficient insulating foam(CfC free). the inner core also acts as a superior soundproofing agent. birtley grP doors are low maintenance, allthat is required is an occasional wipe down with a soapycloth and they will never need painting.

alnwick grP grained Bede grP grained

lindisfarne grP grained cuthbert grP grained

Whitburn grP grained

doorS < 19www.lintels.co.uk


20 > BrickWork

briCk & blOCkS

also available from stock is a full range of blocks, includinglightweight, solid dense and trench.

Solid dense 7N Blocksavailable in sizes of 100mm and 140mm

lightweight Blocksavailable in sizes 100mm and 140mm

Hi-Strength Blocksavailable in sizes 100mm, 275mm and 300mm

Paint Grade Blocksavailable in sizes 100mm and 140mm

Hollow 7N Blockavailable in 215mm

aerated Blockavailable in sizes 100mm to 300mm, in both 3.6n and 7n

trench Blocksavailable in sizes 100mm, 275mm and 300mm

Brick matching

We have thousands of different facing bricks available forselection nationally; many are available for delivery next day.

We sell all current manufactured bricks from Wienerberger, ibstock, hanson,Michelmersh and more. Whether you require 1 pack or full load(s) direct to site; wehave a knowledgeable and experienced sales team that will support you from theinitial selection through to the delivery of your bricks.

We can visit your site or office, to discuss your specific needs

We can take photographs of your existing brickwork to assist brick identification

Where possible we will take an existing brick away to ensure an accurate match

We can select stock panels from our in house comprehensive brick library

you can visit our comprehensive brick library and ‘pick your own’

after matching, we will provide free samples for your approval in 48 hours

deliveries on our own self unload vehicles, offering flexibility to all sites –big or small

to discuss your requirements for our brick matching service orfor any of our range of facing bricks including Wienerberger, ibstock, hanson, Michelmersh and others call us now on 0845 602 6874 for advice, or an appointment.

www.lintels.co.uk


brickw

ork

BrickWork < 21www.lintels.co.uk

Windposts

Bat SteelWindposts

iG Windposts span vertically between floors to provide additional lateral support for large panels ofbrickwork or large panels with openings. iG manufacture three types of windposts.

u Windpostthe u Windpost is a channelsection designed for standardloading conditions and isinstalled within the cavity.

du Windpostthe du Windpost is a “back toback” channel section designedfor heavier loading conditionsand is installed within the cavity.

lP Windpost the lP Windpost is an “l”shaped section designed to suita range of loading conditionsand is built into the inner skin ofthe cavity wall.

u Windpostsfits within the cavity wall

H Windpostfits within the cavity wall

l Windpost Minimise intrusion into thecavity wall

Spine Windpost for internal fairfaced walls

material Specificationig Windposts are manufactured from grade 304stainless steel.

u Windpost

base Connection

top Connection

Wall ties

bat Windposts span verticallybetween floors to giveadditional lateral support forlarge panels of masonry orlarge panels with openings.

four basic options areavailable – u,h,l and SpineWindposts – as well asoptions for parapets and fordirectly below windows.


bri

ckw

ork

www.lintels.co.uk22 > BrickWork

Power-tie ancillary fixingsthe power-tie range encompasses a variety offixings to suit both brick and block constructionfrom cavity wall ties and frame cramps to ladderreinforcement and accessories.

all power-tie wall ties are manufactured in stainless steel1.4301 to bS en 1088-1 and comply with bS en 845-1.

includes a comprehensive range of Movement ties,remedial ties, Wavy tail ties and Screw in Starter tiesdesigned to meet specialist requirements

fixed head restraints, Channel tie systems and Slidinganchor stems and other options.

expamet General Purpose mesh

expamet metal mesh is produced in a variety of grades and materials such ashot rolled mild steel, cold rolled mild steel, pre-galvanised steel, stainless steeland aluminium. Mesh is available in flattened and raised forms.

expamet Security mesh

Our range of expamet Security mesh provides a cost effective way of securingbuildings or internal spaces by sandwiching a layer of mesh into the walls andceilings during construction.

available in a range of gauges. it can also be provided in galvanised steel,where damp conditions are expected.

expamet Walkway mesh

expamet Walkway Mesh provides a cost effective, strong and non slip solutionfor all types of stair treads, gantries and walkways. expamet walkway meshhas a greater strength to weight ratio than solid sheet steel.

expamet Plaster and render lath

expamet lathing provides an excellent key for finishing materials on masonry,ceilings, suspended ceilings and timber frame buildings. Suitable for internaland external applications.

expamet Hy-rib

hy-rib is an expanded metal sheet product, specifically developed for use aspermanent footwork to concrete.


Builders’ and Plasterers’ accessories

Builders’ metalworkWe offer a huge range of builders’ accessories including joist hangers, straps, struts and structural fixings.

bat angle bracket bat restraint Strap bat SPh Joist hanger bat Maxi Speedy Joisthanger

bat framing anchor

bat herringbone JoistStruts

bat timber Connector bat Speedy Joist hanger bat truss Clip bat angle Plate

BrickWork < 23www.lintels.co.uk

Plasterers’ accessories

Plasterers’ beads have become an indispensable part of plastering operations. use of theappropriate beads greatly reduces the time taken in forming sharp corner joints, ends, stopsand other details. Moreover they offer protection and reinforcement to vulnerable plaster edges.

metal Beadsfrom angle beads to movement heads, the expamet range offers a product for every job.

internal use

thin coat plaster

dry lining

external use

PVcu beads

a range of beads that are designedto be easy to fix and offer long-lasting performance. this productrange provides all the benefits oftraditional metal beads with theadded advantage of a light flexiblematerial, aesthetic elegance and costeffective regulatory compliance.


Handy to use 25kg bags

24 hours delivery

No delivery charge

Split pallets

www.lintels.co.uk24 > BrickWork

Coloured mortar to order

cPi euromixnow in stock 25kg bags

Securiframe

MOrtar & Cavity ClOSerS

Provides a damp proof course

Simplifies brickwork - no return bricks needed

Provides thermal break

Stops cold bridging which can cause condensation to form insidethe opening damaging internal decoration and plasterwork

improves heat loss at the window junction, reducing CO2 emissions

Meets accredited Construction details regulationdesigned to improve the heat loss at junctions

Meets needs of Part l of the building regulations

a cavity closer is an energy-efficient aperture formerwhich enables brick courses to be completed and createsan air-tight receiver for windows and doors

cavalok cavitycloser formers

Big Blok cavalok cavitycloser formers


Cavity C

losers

caVitY cloSerS < 25www.lintels.co.uk

thermabate cavity closer

thermabate2 Preformed closer

50mm (brown) in 3m lengths

65mm (black) in 3m lengths

75mm (White) in 3m lengths

85mm (yellow) in 3m lengths

90mm (Orange) in 3m lengths

100mm (green) in 3m lengths

Join any 2 sizes for wider cavities – up to 200mm

Preformed closers manufactured from thermabatecavity closers to your specified window/dooropening sizes

50mm (made to order)






Join any 2 sizes for wider cavities – up to 200mm

thermabatefire one hour fireOne hour fire rated closers

50mm in 2.4m lengths





any 2 sizes joined for wider cavities – up to 300mm.also available preformed to your window/door sizes

Benefits of the thermabate range:

Continuous installation

Simplified Construction

reduced heat loss

Weather resistant

accessories suit the entire range

Controlled

hygrothermal behaviour

flexible use

Simple and easy to use


www.lintels.co.uk26 > acouStic

acoustic fire-rated cavity stop and slab former.

use:to prevent the passage of sound between separatingfloors and party wall junctions.

Performs the function of shuttering when ground andseparating floors are carried to the cavity face of theleaf of party walls.

fire rated and plastic loft access doors

Building regulation Part l compliant product range.

use:to provide simple, easy access through a ceiling into loft space.

1 hour fire rating

Zero air leakage

robust detail Compliant

Part l Compliant

0.35 u/0.25 u value’s

hinged/Push up

bespoke/made to measure.

acousformer and Slabformer horizontal cavity stop


acoustray perimeter cavity Stopacoustic fire-rated cavity stop anddrainage tray

use:to prevent the transmission of flanking noisebetween floor levels and external wall junctions.for use as a fire stop with integrated cavity tray.

acoustic

acouStic < 27www.lintels.co.uk

acousdpc verticalcavity stop

Vertical acoustic fire-rated cavity stopand dPc tray.

use:effectively reduces the transmission of flanking noiseat party wall and external wall junctions.

for use as a fire stop with integrated dPC


www.lintels.co.uk28 > dPc & cloakS

Where to use:hyload is used around window and door openings.

What it does:hyload is an insulated material, designed to restrict heat lossand eliminate cold bridging between the outer and inner brick/ block constructions around openings.

these requirements are now specifically called for in buildingregulations - approved document l and form part of therecommendations of both nhbC and bre.

hyload fr is a fire retardant insulated dPC which maintainsperformance properties whilst meeting current and proposedfire regulations.

What it is:hyload is formed from bitumen polymer dPC laminated tohighly flexible cross-linked polyethylene foam.

hyload fr is formed by laminating a bitumen polymer dPC tophenolic foam insulating board.

How it is used:hyload is incorporated into brickwork or blockwork constructionaround openings in accordance with standard practices.

Where to use:in residential and commercial/industrial construction works.(hyload housebuilder is limited to structures of no more than twostoreys). hyload MortarMatch is a pigmented material that isdesigned for use with stonework.

What it does:the hyload range of dPCs are high performance products thatprovide the best barrier to moisture in brick and blockconstruction.

What it is:all hyload products are synthetic materials. hyload Original and hyload housebuilder are of pitch polymercomposition; hyload MortarMatch is a polymer-modified material.

How it is used:these dPC products are incorporated into brickwork or blockworkconstruction in accordance with standard practices.

Hyload insulated dPc and Hyload fr insulated dPc

High Performance dPcs – the hyload family


dPc & cloakS < 29www.lintels.co.uk

Hyload Pre-formed cloaks

type 2-change of level unit(surface fixed)

type 3-Stop end(brick-block)

type 3-Stop end(surface fixed)

type 5-internal corner(surface fixed)

type 6-external corner(surface fixed)

type 7-external corner(brick-block)

type 7-internal corner(brick-block)

type 8-internal corner (reversible)

type 8S-angled Stop end(right or left hand)

type 9-external corner type 10-column Stop end(brick-block or surface fixed)

Where to use:hyload Pre-formed dPC units are used on site where a dPC cavity tray is required to negotiate a corner, column,change of level or other three–dimensional location.

traditionally, complicated dPC junctions have been formed on site. this method is unreliable; dPC failure occursat such locations and the subsequent remedial work is always many times the cost of installing pre-formed units.

Special Pre-formed unitsare available to order.


www.lintels.co.uk30 > Wall tieS

Staifix rt2 General Purpose tiedesigned to replace the double triangle tie. Suitablefor use in domestic houses and small commercial;buildings up to 3 storeys or 15 metres in height.available lengths: 200mm, 225mm, 250mm

ancon St1 tiea heavy duty wall tie suitable for use in all types of building ofany height anywhere in the british isles.available lengths: 200mm, 225mm, 250mm, 300mm

Staifix Starter tieSimplifies the building of new walls onto existing structures andremoves the need for jointing. designed for use in brickwork and blockwork of up to 8 metres in height. Supplied with an 8mm nylon plug requiring an 8mm drill bit.

Staifix frame tieused to join timber door and window frames directlyto brickwork. Screws into timber frames without theneed for a plot hole. Suitable for buildings up to 15metres in height.

Staifix Hrt4 Housing tiedesigned to replace the butterfly tie. Suitable for use in domestic houses up to 2 storeys or 10 metres in height.available lengths: 200mm, 225mm, 250mm

ancon optima™a standard masonry support system.it comprises a two-step angle, with pre-markedfixing zones and a range of interchangeablebrackets to suit cavities from 60mm to 130mm.

Staifix timber frame tiedesigned to fix brickwork or blockwork totimber-framed structures. Suitable for usein domestic housing, industrial andcommercial developments up to 4 storeys in height.

universal insulation retaining clipSuits all standard ancon and Staifix ties.

lengths 80mm

Staifix universal Wall Starter Systemthe simple way to join newwalls to existing masonry,without cutting out brickwork.the system includes all thenecessary fixings to constructa single skin of masonry, 2400high, and is quick and easy toinstall. it will resist a wind loadof up to 4.5kn over a height of2400mm and is manufacturedfrom corrosion resistantstainless steel allowing it’s usein both internal and external leaves. Wall ties slide withinthe fixing strip to course with the bed joints of anymasonry unit.

channel & Bolt fixingsancon building products offers a range ofChannels and bolts, suitable for cast-in orsurface fixing, in order to fix stainless steelmasonry supports, restraints and windposts to steel or concrete.

Bracket angle Support Systemancon MdC Support Systems are designed andmanufactured to suit specific applications andhave been developed to carry up to threestoreys of external brickwork. by utilising asmall support angle and varying the depth ofthe welded back brackets, the system providesan economical solution for supporting the outerleaf of brickwork.

individual Bracket Support SystemProvides great flexibility in design. these canbe used to support curved brickwork, archesand where the soffit of a soldier course has tobe seen to be unsupported from below.

frame clampsframe Clamps can befixed to concrete,steelwork or masonryusing appropriatefixings.

Special tiesMany variations are available inaddition to standard ties.Wall ties for specialapplications may bespecified and ordered withease by using a reference letter for the tail, shankand head of the tie.

WindpostsWindposts span verticallybetween floors to providelateral support for panels ofbrickwork. Windposts canbe designed as channelsections in a range of sizesand thicknesses or forsmaller cavities designed sothat the leg of theWindpost is built into theinner leaf of brickwork.

WP1

WP2

WP3

insert twist

Slide

ancon masonry Support Systems

the Staifix range of Standard ties


insulation

iNSulatioN < 31www.lintels.co.uk

the Xtratherm Cavity Wall Systemincludes an optional pre-formedinsulation panel that forms a 90degree corner to effectively insulatea junction that is normally vulnerableto thermal bridging and cold spots.

Xtratherm provide a tongued andgrooved jointing system that

results in a more robust, continuouslayer of cavity wall insulation that

minimises the threat of thermalbridging through inaccurate

installation.

a residual cavity is the air spaceretained when Xtratherm Partial fill

Cavity Wall insulation is placedagainst the inner leaf of the cavity

of a wall. the minimum residualcavity width allowed is 25mm in

accordance with the Xt/CW bbacertificate 07/4407 however 50mm

may be required by the designer.

the low emissivity foil facing on Xtratherm boardsimprove the thermal performance of the wall.

the residual cavity is the most effective method ofpreventing rain penetrating a wall from theoutside.

eXternal Wall – typical installation

Sheet SiZe and tOleranCe

diMenSiOnS

Length

Width

Thickness

SiZe (mm)

1200

450

25/30/35/40 (square edge)

40/50/60/65/70/75/80/100 (T&G)

Xtratherm preformed revealPanels effectively insulates

around window and dooropenings. the panel is cut to

effectively insulate the internalface of the reveal and extend

into the cavity exactly 150mm.this allows wall ties to be

placed as required byregulations every course of

block 150mm in from the edge.

Specification ClauseThe partial fill cavity wall insulation shall be Xtratherm Thin-R XT/CW _ _ _mm thick manufactured to EN ISO 9001:2000 by Xtratherm, comprising aCFC/HCFC rigid Polyisocyanurate (PIR) core between low emissivity foilfacings. The wall insulation shall be installed in accordance withinstructions issued by Xtratherm.Refer to NBS clause F30 151, F30 12

cavity Wall Benefits:

robust tongued and groovedjointing

Clear cavity maintained

no exposure restrictions

low emissivity foil facings

extra thermal performance


www.lintels.co.uk32 > iNSulatioN

PrOPerty

Density (Foam Core)

Compressive Strength

Water Vapour Resistivity

Thermal Conductivity

Service Temperature

Surface Spread of Flame

unitS

26-30 Kg/m3

>120 kPa

>100 MNs/gm

0.023 W/mK

-20 to 100ºC

Class 1

cavity Wall installation Guidelines

insert wall ties max 600mm cs one blockcourse below dPC

Secure cavity boards tight against inner leafwith retaining clip on approved wall ties.

Maintain a 50mm residual cavity to suit allexposure zones

ensure a minimum 25mm residual cavity is maintained. this may have to be increased to suit conditions. (e.g. nhbC)

Place wall ties at max 900x450 centres eachboard secured with a minimum of 3 wall ties

ensure block joints are fully bonded with unbroken mortar

fix wall ties 225mm vertically and 150mmhorizontally from face of unbonded jambs

ensure wall ties (Cavity) are kept clean ofmortar and are sloped towards outer leaf

a cavity board should be used to keep cavity clean

Xtratherm corner boards and preformed reveal panels may be fitted to provide robust detailing

Xtratherm hyclips can be used to secureboards tightly against inner leaf at sills and wall plate etc. were wall ties areinappropriate.

u-value calculations to bS en iSO:6946Cavity Wall (Xt/CW) – Partial Fill

u-values achieved using Xtratherm thin-r/CW – dot & dab finish

thin-r Xt/cWPartial fill cavity insulation

Xtratherm thin-r/CW(t&g) is the best solution when designers/ regulations demandadditional thermal insulation in external masonry walls. Xtratherm thin-r boards achieve highstandards of insulation whilst maintaining a residual cavity to prevent moisture penetration,without a substantial increase in the width of the cavity and of the overall wall thickness.

Improvements in U-values and accrediteddetailing can beachieved with andadditional layer of andXtratherm Thermal Liner.



the Xtratherm range of high performance insulation boardsprovides the complete solution for newbuild and refurbishment.

thin-r cavitytherm

thin-r flat roof thermal Ply

thin-r Partial fill cavity Wall insulation

thin-r insulation for drylining Walls

thin-r underfloor insulation

thin-r under floor insulation

Standards Xtratherm thin-r is manufactured underquality systems approved under en iSO9001 and it’s use is covered by the followingbba Certificates:04/4130 - 08/4613 - 10/4786

cuttingXtratherm thin-r boards can be readilycut using a sharp knife or fine toothed saw.

electrical ServicesWhen running electric cables withininsulation, advice given in the brepublication “thermal insulation: avoidingrisks” and bS 7671: 2001 should befollowed.

durabilityXtratherm thin-r is stable, rot proof anddurable. it will remain an effective insulant forthe life of the building.

availabilityXtratherm thin-r is available through Merchantsand distributors throughout the uk and ireland.for the location of your nearest stockist contactXtratherm.

PackagingXtratherm thin-r is wrapped in polythene packsand each pack is labelled with details ofgrade/type, size and number of pieces perpack..

Handling & StorageXtratherm thin-r should be stored off theground, on a clean, flat surface and must bestored under cover. the polythene wrapping ofXtratherm thin-r pack is not consideredadequate protection for outside exposure.

Health & Safetyall Xtratherm products are safe to use andchemically inert. a health & Safetyinformation sheet is available from theXtratherm technical Support department.

availabilityXtratherm thin-r is available throughCivils & lintels in all uk branches. Checkwith closest merchant for stock information.

• built-in insulation system• achieves ultimate u-values• for traditional wall construction

Ct/Pir

• insulation & decking in one fix• for new & refurbishment roofs• rapid weather proofing

Xt/tP

• robust tongue & groove jointing• Clear cavity maintained• Corner & reveal panels• low emissivity foil facings• extra thermal performance

Xt/CW

• high thermal performance• drylining & insulation in one fix• Shorter drying time• responsive insulation system

Xt/tl-Mf

• extra thermal performance• Suitable for under floor heating• reduced insulation thickness• high compressive strength

Xt/uf

• effective insulation of roof area• reduced insulation thickness• reduces thermal bridging• Minimizes intrusion into living area

Xt/Pr


34 > iNSulatioN

for floorS, WallS aNd roofS

descriptionearthwool universal Slabs are a range of semi-rigid torigid, non-combustible, glass mineral wool slabs.

applicationearthwool universal Slabs are general purpose slabsfor thermal and acoustic insulation slabs suitable foruse in a wide range of applications.

Standardsearthwool universal Slabs are non-combustible, glass mineral wool, defined as mineral wool in bS 3533: 1981 and are manufactured in accordance with bSi Qualityassurance Standard bS en iSO 9001:2000, and ProductStandard en 13162.

durabilityearthwool universal Slabs are rot proof, do not sustainvermin and will not encourage the growth of fungi,mould or bacteria, they are odourless andnonhygroscopic.

Vapour resistance – resistivityearthwool universal Slabs offer negligible resistance tothe passage of water vapour and have a vapourresistivity of 7.00 Mn.s.g.m.

environmentalearthwool universal Slabs are free from CfCs, hCfCsand any other material with ozone depletion potential intheir manufacture and content and represent no knownthreat to the environment.

Universal Slabs manufacture has a low impact onthe environment and is classified as Zero ODP andZero GWP.

Handling and storageearthwool universal Slabs are easy to handle and install,being lightweight and easily cut to size, where necessary.they are supplied in polythene packs which are designedfor short term protection only. for longer term protectionon site, the product should either be stored indoors, orunder cover and off the ground.installation instructions are on every pack. earthwooluniversal Slabs should not be left permanentlyexposed to the elements.

www.lintels.co.uk

earthwool® universal Slabs


earthwool® cavity Barriers

for coNcealed caVitieS

descriptionearthwool Cavity barriers are manufactured from acontinuous length of non-combustible glass mineral woolwhich is compressed within a resilient polythene sleeveincorporating two flanges designed for ease of fixing.

the polythene sleeve is colour-coded to suit a variety ofcavity widths from 50mm to 100mm and eliminates theneed for weather protection during installation.

fire resistance performanceearthwool Cavity barriers are manufactured from glassmineral wool which has a euroclass a1 fire rating whenclassified in accordance with bS en 13501-1.

earthwool Cavity barriers have been tested for fireresistance in accordance with bS 476: Part 8: 1972 andwill provide 60 minutes stability, integrity and insulation.


Benefits

Meets building regulation requirementsfor both fire and acoustics

Simple to install and fix due to flanges onall thicknesses

easy identification by colour codedpolythene for stockist and contractor

dimensionally stable and robust


www.lintels.co.uk36 > coNVerSioN cHart

COnverSiOn Chart

imPortaNt – thiS Chart iS a guide Only, draWingS Or lOadingS ShOuld be fOrWarded tO theteChniCal dePartMent fOr a definitive lintel SPeCifiCatiOn. if in dOubt, PleaSe aSk

WALL CONSTRUCTION BIRTLEY CATNIC IG KEYSTONE

100mm Outer Cb 70 Cg 70/100 l1/S 75 S/k-7070-80mm Cavity Cb 70 hd Ch 70/100 l1/hd 75 or l1/Xhd 75 hd/k 70100-115mm inner hS70 CX70/100 l5/75 CfS/k 70

Xhd 70 or SX 70 CXl 265 l6/75 X/k 70

100mm Outer Cb 90 Cg 90/100 l1/S 100 S/k-9095-105mm Cavity Cb 90 hd Ch 90/100 l1/hd 100 or l1/Xhd 100 hd/k 90100-115mm inner hS90 CX 90/100 l5/100 CfS/k 90

Xhd 90 or SX 90 CXl 290 l6/100 X/k 90

100mm Outer Cb 70/130 Cg 70/125 l1/SWil 75 S/k-70Wil70-80mm Cavity Cb 70/130 hd Ch 70/125 l1/hdWil 75 or l1/XhdWil 75 hd/k 70 Wil125-140mm inner hS 70/130 CX 70/125 l5/Wil75 CfS/k 70 Wil

Xhd70/130 or SX70/130 CXl 290 l6/ubWil 75 X/k 70 Wil

100mm Outer Cb 90/130 Cg 90/125 l1/SWil 100 S/k-90Wil95-105mm Cavity Cb 90/130 hd Ch 90/125 l1/hdWil 100 or l1/XhdWil 100 hd/k 90 Wil125-140mm inner hS 90/130 CX 90/125 l5/Wil 100 CfS/k 90 Wil

Xhd90/130 or SX90/130 CXl 310 l6/ubWil 100 X/k 90 Wil

100mm Outer Cb 110 Cg 110/100 l1/S 110 S/k 110110-125mm Cavity hS 110 Ch 110/100 l1/hd 110 or l1/Xhd 110 hd/k 110100-115mm inner hdX 110 or SX 110 CX 110/100 l5/110 CfS/k 110

CXl 310 l6/110 X/k 110

100mm Outer Cb 130 Cg 130/100 l1/S 110 S/k 110130-145mm Cavity hS 130 Ch 130/100 l1/hd 110 or l1/Xhd 130 hd/k 130100-115mm inner hdX 130 or SX 130 CX 130/100 l5/130 CfS/k 130

CXl 330 l6/130 X/k 130

100mm Outer Cb 150 Cg 150/100 l1/S 150 S/k 150150-165mm Cavity hS 150 Ch 150/100 l1/hd 150 of l1/Xhd 150 hd/k 150100-115mm inner hdX 150 or SX 150 CX 150/100 l5/150 CfS/k 150

CXl 350 l6/150 X/k 150

50-80mm Cavity Cbev 50 or Sb evC Cge 50/100 or Cn 55a l1/e 50 el/k-50 100-115mm inner

90-100mm Cavity Cbev 90 Cge 90/100 l1/e 100 el/k-90100-115mm inner

100mm Outer50-60mm Cavity tf 50 Ctf 5 l7/50 or l7/55 t/k 50tiMber fraMe tf50hd Cn 23C l7/hd50 or l7/hd55

100mm Outer70-90mm Cavity tf 70 Ctf 7 l7/75 t/k 70tiMber fraMe tf 70hd l7/hd75

100mm Outer70-90mm Cavity tf 90 Ctf 9 l7/100 t/k 90tiMber fraMe tf 90hd l7/hd100

200mm SOlid Wall Ob 190 Cn 50C / Cn51 C l 9 SW/kOb 190 Cn51 C l9 Med duty dep on length/load

200mm SOlid Wall Sbl 200 Cn 71a / Cn 81b bOX 200 bOX/k200Sbl 200hd Cn 81C hdbOX 200 dep on length/load hdbOX/k200

100mm eXternal la ang l 10 Sb/kleaf

100mm eXternal ev 100 CCS l 11 Sl/kleaf

75mm internal int 75 Cn 92 int 64Wall

int 100 Cn 102 int 100 int/k100mm internal Sb 100 bSd/100 or bhd 100 bOX 100 bOX/k 100Wall Sb 100hd bhd 100 hdbOX 100 hdbOX/k 100

140mm internal Sb 140 bSd/140 or bhd 140 bOX 140 bOX/k 140Wall Sb 140hd bhd 140 hdbOX 140 hdbOX/k 140



Our ServiCe Offer

customer Service

We offera plan take off service across the full product range

full tendering/estimating service

Plot banding of lintels

Pre-picked customer collections

Working in conjunction with our suppliers we can offer design and value engineering solutions to a variety of housebuilding orcommercial projects.

Partnering

We are experienced at working in both project specific and strategicagreements. value is placed upon relationships and relationships arebased on trust and openness.

e-commerceConsolidated invoicing

electronic invoicing

Computer hub(enabling customers access to our computer platform)

Credit Card Security

Website

a user friendly website with:

Product information

Branch locator

latest news and access to all our literature

our prices include as standard:delivery

Crane offload

Plot id

banding

Scheduling services

technical assistance

Manufacturers indemnity


GCMAP0006_BB Civils_Lintels and PDM map

M1

M40

M4

M5

M25

M62

M11

M3

M6

M5M42

KIRKCALDY

M18

A1(M)

M6

GLASGOW

EAST KILBRIDE

M90

M8

M80

INVERNESS

EDINBURGH

KILMARNOCK

A9

M77

A90

A1

A11

A74(M)

M6

M1

M6

DUMFRIES

BROXBURN

BILSTON

WESTBURY

HUTHWAITE

FARNWORTH

BRAINTREE

WARRINGTON

EXETER

ABERFAN

YORK

NEWCASTLE UNDER LYME

HAYES

OLNEY

SOUTH SHIELDS

LINCOLN

CRADLEY HEATHCOLCHESTER

FAREHAM

THETFORD

ERITH

LEEDS

GRANGEMOUTH

ABERDEEN

Civils, Drainage, Heavyside, Ground Engineering & LintelsFor a full range of Lintels, available to purchase online visit www.lintels.co.uk

ABERDEENLoch-Hills, Parkhill, Dyce, Aberdeen. AB21 7ATT: 01224 774400 | E: [email protected]

BROXBURNYoungs Road, East Mains Industrial Estate, Broxburn EH52 5LYT: 01506 862158 | E: [email protected]

DUMFRIESTinwald Downs Road, Heathall, Dumfries. DG1 1TST: 01387 249748 | E: [email protected]

EAST KILBRIDEUnit 8 Peel Park Place, College Milton South, East Kilbride G74 5LWT: 01355 270222 | E: [email protected]

EDINBURGHBlock 1, A1 Industrial Park, 224-226 Sir Harry Lauder Road, Edinburgh EH15 2QAT: 0131 657 9993 | E: [email protected]

GLASGOW302 Drumoyne Road, Glasgow G51 4DXT: 0141 892 8900 | E: [email protected]

INVERNESS53 Shore Street, Inverness. IV1 1NY T: 01463 713383 | E: [email protected]

KILMARNOCKPlot 1, Moorfield North Industrial Park, Kilmarnock KA2 0FET: 01563 540000 | E: [email protected]

KIRKCALDYUnit 3 Randolph Court, Randolph Industrial Estate, Kirkcaldy KY1 2YYT: 01592 655592 | E: [email protected]

www.pdmltd.co.uk

Buildbase Lintels and PDM are trading divisions of Grafton Merchanting GB Ltd, Gemini One, 5520 Oxford Business Park South, Cowley, Oxford, OX4 2LL. Tel: 0845 470 7100

LET’S GET THE JOB DONE.

www.lintels.co.ukTel: 0845 470 7100

ABERDEEN Silverburn Place, Bridge Of Don, Aberdeen AB23 8EG T: 01224 258200 | E: [email protected]

ABERFAN Pant Glas, Aberfan, Merthyr Tydfil CF48 4QH T: 01443 690221 | E: [email protected]

BILSTON Anchor Lane, Bilston, West Midlands WV14 9NE T: 01902 491111 | E: [email protected] BRAINTREE 3 Tamdown Way, Braintree, Essex CM7 2QL T: 01376 550550 | E: [email protected]

COLCHESTER (HSL) Commerce Way, Whitehall Industrial Estate, Colchester, Essex CO2 8HH T: 01206 792001

CRADLEY HEATH Powke Lane, Cradley Heath, West Midlands B64 5PX T: 0121 796 9650 | E: [email protected]

ERITH Viking Way, Church Manorway Industrial Estate, Erith, Kent DA8 1EW T: 01322 446200 | E: [email protected]

EXETER Unit S, Yeoford Way, Matford Park, Marsh Barton, Exeter, Devon EX2 8LB T: 01392 455899 | E: [email protected]

FAREHAM Pegham Industrial Park, Lavey’s Lane, Fareham, Hampshire PO15 6SD T: 01329 840250 | E: [email protected]

FARNWORTH Bloomfield Road, Farnworth, Bolton, Greater Manchester BL4 9LP T: 01204 862222 | E: [email protected]

GRANGEMOUTH Wood Street, Grangemouth, FK3 8LH T: 01324 665444 | E:[email protected]

HAYES Appin House, Stewart Quay, Printing House Lane, Hayes, Middlesex UB3 1AP T: 0208 573 1000 | E: [email protected] HUTHWAITE Nunn Brook Road, Country Industrial Estate, Huthwaite, Nottinghamshire NG17 2HU T: 01623 440330 | E: [email protected] LEEDS 1 Springwell Court, Leeds, West Yorkshire LS12 1AL T: 0113 394 4940 | E: [email protected] LINCOLN Pelham House, Canwick Road, Lincoln, Lincolnshire LN5 8HG T: 01522 559161 | E: [email protected] NEWCASTLE-UNDER-LYME Beechville Building Centre, Brampton Sidings, Newcastle-Under-Lyme, Staffordshire ST5 0SR T: 01782 617354 | E: [email protected]

OLNEY Unit 1 Stilebrook Road, Olney Industrial Est, Olney, Buckinghamshire MK46 5EA T: 01234 717300 | E: [email protected]

SOUTH SHIELDS Throckley Way, Middlefield Industrial Estate, South Shields, Tyne & Wear NE34 0NU T: 0191 455 8111 | E: [email protected]

THETFORD Wyatts Way, Thetford, Norfolk IP24 1HB T: 01842 821200 E: [email protected]

WARRINGTON Wilson Pattern Street, Warrington, Cheshire WA1 1HN T: 01925 255700 | E: [email protected]

WESTBURY Chemical Road, West Wilts Trading Est, Westbury, Wiltshire, BA13 4JX T: 01373 827275 | E: [email protected] YORK Charlotte Street, via James Street, York, North Yorkshire, YO10 3WW T: 01904 436630 | E: [email protected]

Tel: 0141 892 8950

GC00091_Buildbase Lintels Brochure - Back Page.indd 1 17/12/2015 11:16

Documents

LET’S GET THE JOB DONE · 2016-01-04 · catnic is again, one step ahead and has an experienced team of feature design engineers dedicated to providing innovative design solutions