Upload
khairitkr
View
219
Download
0
Embed Size (px)
Citation preview
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
1/36
Welcome toLesson 6:
Process, Location &Layout Strategies;
and PLANNING.
6.0
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
2/36
Process Strategy;Location Strategy;Layout Strategy.
6.1
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
3/36
q Process Strategy is the approachthat an organisation takes to
transform its resources into goodsand services.
qIts importance occurs when there isa new product, or when there is atechnological change, or there is a
competitive pressure.
What is
Process Strategy?
6.2
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
4/36
Process Focus processes of lowvolume, high variety of products.E.g. A bakery shop produces alltypes of breads & cakes, cookies &buns but in small quantities.E.g. Banking, spa & restaurantservices also adopt process focus
deliver to customer orders.
4 Types ofProcess Strategy
6.3
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
5/36
Product Focus this is a massassembly line with high volume, lowvariety products. Facilities areorganized around product (families).They require high investment, withspecialized equipment high fixedcosts, but low variable costs. E.g.
Car and TV assembly lines.
4 Types ofProcess Strategy
6.4
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
6/36
Repetitive Process Focus falls inbetween product & process focuses.This uses the modular approach.Modules are components that arepre-prepared in assembly lines. E.g.In a factory, there are various typesof sub-assembly lines all these will
feed into the final assembly line.
4 Types ofProcess Strategy
6.5
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
7/36
Mass Customisation Focus thisproduces various types of productseconomically, and in quantities thecustomers want in a very short time.It is a combination of product,process and repetitive strategy good for make-to-order forecasts.
E.g. Toyota car production.
4 Types ofProcess Strategy
6.6
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
8/36
Process Flow Diagram 6.7
CUSTOMER:
Order product
SALESPERSON:
Process order,
Print order,
Go to store.STORE CLERK:
Key in item,
Take item from
rack.SALESPERSON:
Pack item
CUSTOMER:
Pay cash,
Receive item.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
9/36
q Once a new product/service designhas been determined, a company has
to select a location for its businessor its outlet.
q Just observe the locations of KFC,
McDonald, commercial banks, foodrestaurants, etc. Locations affectbusiness performances and sales.
Why Location Strategy? 6.8
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
10/36
q To maximise the benefits of being
near (accessible) to customers.
q To minimise the operational costs:
Cost of land, rental, living, etc; Distribution costs; Raw material costs; Labour costs.
Objectives ofLocation Strategy
6.9
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
11/36
Tangible Factors:
q Land cost & size;q Raw material cost & availability;q Labor costs & availability;
q Distribution costs;q Utilities & services costs;q Foreign Exchange & Tax rates.
3 Factors InfluencingLocation Strategy
6.10
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
12/36
Intangible Factors:
q Geographical site;q Climatic factors;q Political stability;q High purchasing power;q Safety & security;q
Cultural factors.
3 Factors InfluencingLocation Strategy
6.11
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
13/36
Market Factors:q
Proximity to customers;q Proximity to suppliers;q Competition businesses have
tendencies to cluster, i.e. tolocate near to each other, evencompetitors, to create a
critical mass.
3 Factors InfluencingLocation Strategy
6.12
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
14/36
q How to carry out a location study? First, form a team of at least 3
members. The team needs to do asite survey and collect data.
Quantitative Data: population, age,
gender, youths, family size, income,size of location, no.of shops, schools,bus terminals, hospitals; and others
through interviews as well.
A Location Study 6.13
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
15/36
Qualitative Data: climate, security,environment, local governmentregulations, local communities,culture, market, competitions(through observations), networking,
chats & mingling with locals, etc.q From these groundworks, the team
is able to determine the tangibles,
the intangibles, & market factors.
A Location Study 6.14
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
16/36
q To achieve high utilisation of space,equipment & people;
q To improve flow of people, materialand people;
q To increase employee morale;q To create a safer work condition;q To improve customer interactions;q To cater for flexibility (future).
Importance ofLayout Strategy
6.15
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
17/36
q Fixed position layout for handlingprojects, like road construction;
q Process layout low volume high variety;for product differentiation strategy;
q Product layout high volume low variety;
q Group cell layout for modular design;q Retail layout to show out products;q Office layout good for service-based,
not for product-based organisations.
Types ofLayout Strategies
6.16
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
18/36
Types of Planning;MRP; MRP 2; andERP.
6.17
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
19/36
Aggregate Planning is part of alarger planning system. It requiresa good understanding of forecastingdemand in the market, and capacityplanning in the organisation.
Aggregate planning is done for theoverall products and the overallcapacity.
AGGREGATEPLANNING
6.18
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
20/36
6.19Aggregate Planning(objective & goal)
The objective of A/P is to meetforecast demand in the market andto minimise operational cost overthe planning period through variousstrategies such as: Adjusting production rates; Managing the inventory levels; Working hours; etc
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
21/36
6.20Aggregate Planning(objective & goal)
The goal of A/P is to produce aproduction plan MasterProduction Schedule (MPS) thatwill effectively utilise theorganisations resources tomatch expected forecast
demand.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
22/36
The Planning Process 6.21
Long Range Planning, or strategicplanning is the responsibility of theTop Management e.g. President,CEO, Board of Directors, etc. Medium Range Planning, or tacticalplanning will start after completion of
the strategic plan. This is whereAggregate Planning is done. Short Range Planning, or operationalplanning follows next.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
23/36
6.22Aggregate Planning(strategies)
A/P strategies involve manipulation ofinventory, production rates, labour
levels, capacity and other controllablevariables. Given forecast demand, facilitycapacity, the workforce size, and all
the above information, the planner hasto determine the rate of productionoutput for the organisation or a
facility over 6-12 months.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
24/36
6.23
Product
Dev. Decisions
Research,Design &
Technology
Aggregate Planning
ForecastDemand
Aggregate
Planning
Master
Prod. Schedule
Manpower
Planning
Sub-
Contracting
Operational
Costs
Market
Demand
Process Plan.
Capacity Dec.
Machine
Capacity
Raw Mater.
Planning Cap.
Vendor, Supp.
Capacity
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
25/36
6.24Aggregate Planning(continue)
Aggregate
Planning
Master
Prod. Schedule
FinanceProduct.Engineer. Market. Procure.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
26/36
6.25
MRP is a production planning andinventory control system used tomanage manufacturing processes.
While it is possible to conduct MRP byhand, today, most MRP systems aresoftware-based.
Material RequirementPlanning (MRP)
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
27/36
6.26Material RequirementPlanning (MRP)
MRP is a computerised informationsystem that incorporates a pool of
huge database on all requirementsneeded to plan, forecast, schedule,order, track and monitor themovements of items, components and
inventories for all production stages. It also includes the inventory stocklevels, and others, to help in planning
and making operational decisions.
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
28/36
6.27
MRP has 3 simultaneous objectives:
To ensure raw materials are availablefor production, and products areavailable for delivery to customers; To maintain the lowest possible rawmaterial and product levels in store; To plan manufacturing activities,delivery schedules, and purchasing
activities.
Material RequirementPlanning (MRP)
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
29/36
6.28
MRP begins with the Master ProductionSchedule (MPS) for finished goods to
be produced. MRP system requires 4 mainrequirements (inputs) as listed below: Master Production Schedule (MPS); Bill of Materials; Inventory Stock Level; Purchase Order Outstanding
Material RequirementPlanning (MRP)
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
30/36
6.29
Too frequent changes in salesforecasts, entailing continualadjustments in production, as well asthe unsuitability of the parametersfixed by the system, led Material
Requirement Planning (MRP) to evolveinto a new concept: ManufacturingResource Planning (MRP 2).
Manufacturing ResourcePlanning (MRP-2)
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
31/36
6.30
MRP-2 is defined as a method for theeffective planning of all resources of amanufacturing company. Ideally, itaddresses operational planning in units,
financial planning, and has a simulationcapability to answer "what-if" questionsand extension of closed-loop MRP.
ManufacturingResource Planning
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
32/36
6.31
MRP-2 is not exclusively a softwarefunction, but a marriage of peopleskills, dedication to database accuracy,and computer resources.
It is a total company managementconcept for using human resources moreproductively.
ManufacturingResource Planning
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
33/36
6.32
MRP and MRP-2 are predecessors ofEnterprise Resource Planning (ERP), abusiness information integration system.
The development of thesemanufacturing coordination andintegration methods and tools madetodays ERP systems possible.
Enterprise ResourcePlanning (ERP)
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
34/36
6.33
Both MRP and MRP-2 are still widelyused, independently and as modules ofmore comprehensive ERP systems.
But the original vision of integratedinformation systems as we know themtoday began with the development ofMRP and MRP-2 in manufacturing.
Enterprise ResourcePlanning
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
35/36
6.34
ERP systems integrate internal andexternal management of informationacross an entire organization embracing
finance & accounting, manufacturing,sales & services, CRM, etc.
ERP facilitates information flowbetween all business functions insidethe organization, and managesconnections to outside stakeholders.ERP software is a multi-billion dollar
industry.
Enterprise Res. Planning
7/29/2019 LESSON 6.Related OM Strategies.ok (1)
36/36
The
END
Last