PRODUCT LINK™ PL421

LEHE0402-01

VisionLink Application Asset Details Screen

CAT® PRODUCT LINK™ FOR ELECTRIC POWER

Caterpillar is leading the power generation market place with power solutions engineered to deliver unmatched performance, reliability, durability and cost-effectiveness.

FEATURES

GENERAL DESCRIPTION Cat® Product Link™ is a comprehensive remote monitoring and asset management solution, enabling powerful tools that transform data from an entire fleet of equipment into the essential information required to boost productivity, reduce costs and manage risks. Product Link PL421 hardware collects GPS positioning and data reported directly off the asset, transmitting it off-board through cellular GSM communication networks. PL421 hardware is deeply integrated with Cat EMCP 3, EMCP 4 and ADEM™ generator set controllers, enabling remote visibility to advanced health and utilization data, as well as easy plug and play installation. Product Link’s intuitive web-based interface, VisionLink®, makes it easy to monitor data from your whole fleet, and then zoom in for a detailed look at individual assets. Alerts can be configured to automatically notify those who need to know via e-mail or SMS text when something occurs that needs immediate attention. In addition, data from your equipment can easily be fed to other business software, allowing you to gather the data once, and then use it wherever needed in third-party applications. WORLD WIDE PRODUCT SUPPORT • Cat dealers provide extensive pre-sale and post-

sale support. • The Cat dealer network consists of over 1,600

dealer branch stores operating in over 200 countries.

FEATURES Robust PL421 hardware paired with the VisionLink application provides accurate and timely information about the location, status, utilization and health of your equipment around the clock. • Monitor asset hours and general usage,

including equipment location with easy online mapping features.

• Schedule planned maintenance and major repairs with the most effective use of the asset in mind, avoiding unnecessary downtime.

• Monitor generator set status on systems with an EMCP 3, EMCP 4 or ADEM controller including whether the engine is running or stopped. Also monitor not ready to run status with an EMCP 4.

• Manage diagnostic and event codes reported on systems with an EMCP 3, EMCP 4 or ADEM controller in real-time, allowing detection of problematic health conditions before they cause component failures.

• Utilize advanced engine monitoring available on systems with an ADEM controller.

• Easily configure alerts for automated e-mail and text messages that notify anyone who needs to know of important events including:

- Not ready to run status supported by EMCP 4 controllers

- Asset on and off

- Site boundary entry and exit

- Service coming due

- Loss of main battery power

- Health codes supported by EMCP 3, EMCP 4 and ADEM controllers

CAT PRODUCT LINK FOR ELECTRIC POWER

LEHE0402-01

2

PL421 HARDWARE INFORMATION TECHNICAL DETAILS • Rugged IP-67 rated enclosure, sealed against

moisture and able to withstand harsh environments

• Compatible with 12v and 24v electrical systems • Internal GSM/GPRS cellular modem and antenna

for off-board data transmission • Internal GPS receiver for acquiring location • Built-in NiMH rechargeable battery backup • Reverse polarity protection • Overvoltage protection • Integrated with EMCP 3, EMCP 4 and ADEM

controllers • Hardware system is completed by an external

GPS antenna with dual mount magnet and peel/stick capability and a UL rated harness for easy installation

SPECIFICATIONS • Voltage Range: 9 to 32 Vdc • Sleep Current: 7mA @ 12 Vdc • Peak Current: < 1A @ 12 Vdc • Overall Operating Temperature: -40°C to + 85°C • Dimensions:

165mm (W) X 150mm (H) X 55mm (D) / 6.5in (W) X 5.9in (H) X 2.2in (D)

STANDARDS • UL Recognized • PTCRB and GCF CC • FCC Parts 15, 22 and 24 • Industry Canada (IC) • CE • EC R&TTE Directive • RoHS

PL421 Hardware Module

CAT PRODUCT LINK FOR ELECTRIC POWER

© 2013 Caterpillar LEHE0402-01 (10/13) All Rights Reserved

VisionLink Application Fleet Summary Screen

VisionLink Application Hours & Location Screen

Customized Notification Via E-mail and SMS Text

Comprehensive Fleet Management

Track and monitor all of your equipment including power systems, earthmoving and auxiliary units

Easily view last-reported hours, location, generator set status and more

Manage health, utilization and preventive maintenance for your entire fleet

Customize the information displayed on your screen and quickly filter to see the assets you need to

Detailed Asset Management

Quickly view generator set state, along with alert and fault code status

Easily locate a single generator set with street, satellite and hybrid map views and track movement over a specified time period

Monitor when and where fault codes occur

Easily plan maintenance and see what service is due

Request real-time information updates

Customized Alert Notifications

Configure system generated e-mail and SMS text notifications to the people who need them most

Receive notification when generator set status changes including Engine Running, Engine Stopped and Not Ready to Run

Immediately know when health codes or fluid analysis results require attention

Receive an alert when an asset has entered or left a specified area

* Availability of advanced health and utilization data is dependent on the version of control system installed.

Materials and specifications are subject to change without notice. CAT, CATERPILLAR, their respective logos, “Caterpillar Yellow,” the “Power Edge” trade dress as well as corporate and product identity

used herein, are trademarks of Caterpillar and may not be used without permission.

VisionLink is a trademark of Trimble Navigation Limited, registered in the United States and in other countries.