LED Short Form Catalogue Page 1 - Front Page - Xulux Short Form...Max length 20 metres if fed from both ends. 160 Beam Angle 120mm Bend Flame Resistant UV Saltwater Solvent Resistant

xuluxControl - Illuminate

Thank you for taking the time to browse through our short form catalogue.

Xulux has an extensive range of products, and along with our technical & application expertise, will inspire you to use our range of products as your controls and illumination solutions in any kind of project. Anything from a simple one dimmer, one panel solution through to multi-channel networks can be achieved using the same range of products, configured according to the needs of the project.

In scene set control for decorative lighting, our reputation is second to none. We’ve been the industry leader for decades. For energy management and automatic switching systems, Xulux has implemented some of the country’s largest and most extensive networks. We employ the latest in sensor technology, relay technology and third party interfaces that allow you to choose how the system will operate; from user control panels, to touch screens, to web pages, to tool tray icons and wireless networks.

In specialty illumination projects we offer some of the most innovative LED solutions for the smallest project through to complete control of major building facades where output, long life and attention to detail are critical.

As with most printed material, this document will probably be out of date by the time you finish reading it. At Xulux we are constantly introducing new products and utilising the latest technology. Please keep an eye on our website for the most up to date information.

Finally, remember to take advantage of our advisory service where we offer you our expertise on the best, latest and most cost-effective ways to design a system that meets the needs of your project.

Xulux.....ensuring 100% commitment to specification and delivery of LED lighting and lighting control products to the Queensland market.

xuluxControl - Illuminate

Contents

LED Down Lights - A range of commercial COB down light options 3Linearchain - A flexible high wattage indoor/outdoor LED chain 4LedConnect - High intensity non spotting LED PCB 4Linearflex - A large range of LED flexible strip to suit all applications 5Aluminium Profiles - A sample of the many aluminium option available 6Power Supplies - Indoor/Outdoor switching and dimming power supplies 7LED Controllers - DMX drivers and wall mount panel options 8Sensors - Stand Alone - A range of PE/PIR and Microwave self progam Sensors 9Helvar - Introduction to Helvar 11Helvar Basic - Switching and dimming control without programming 12Helvar Self Program - Switching and dimming control via panel programming 14Helvar Toolbox - Single DALI networks programmed via Toolbox software 16

ares 11 watt - 3/4000k - Wht/Blk aura 12/18/25 watt - 3/4000k - Wht/Blk

3

* 2-5 Year Electrical System Warranty

led down lights* Recessed or Surface Mount* Switch, DALI, Phase Cut

* 3000/4000k* Ceramic Chip on Board (COB) Technology

IP20CRI>80 MEDIUM

40

WIDE

60

NARROW

28

V NARROW

16

heos 13/21/30/40 watt - 3/4000k - Wht/Blk

IP40CRI>80 WIDE

60

quadra 30/40/60/80/90/120 watt - 3/4000k - Wht/Blk

IP20CRI>80 MEDIUM

40

NARROW

20

cora 12 watt - 3/4000k - Wht/Blk

IP65CRI>80 MEDIUM

40

Please refer to individual data sheetsfor full specification and dimensions

IP42CRI>80 MEDIUM

40

WIDE

60

NARROW

20

CRI>90 CRI>98

erebus 6/10/18/25/38 watt - 3/4000k - Wht/Blk

IP20CRI>80 MEDIUM

40

WIDE

60

NARROW

20

CRI>90 CRI>98

gaia 6/10/18/25/38 watt - 3/4000k - Wht/Blk

IP20CRI>80 MEDIUM

40

WIDE

60

NARROW

20

CRI>90 CRI>98

nyx 6/10/17/25/38 watt - 3/4000k - Wht/Blk

IP42CRI>80 MEDIUM

40

WIDE

60

NARROW

20

CRI>90 CRI>98

90.0°

sapphire 6/10/15/20/30/40 watt - 3/4000k - Wht/Blk/Sil

gimble - 10/15/20/30w onlyIP33MEDIUM

30

WIDE

50

CRI>80

gia 13/20/27 watt - 3/4000k - Wht/Blk

IP20CRI>80 MEDIUM

40

NARROW

20

Surface Pendant

Lumen Output:

White - 2700K, 3000K, 4200K, 6500K, 7500KColour - Red, Green, Blue and Yellow

12v DC 0.45 Watts per Module

linearchain IP68

W42 - 4200K - 38 lm/Module W30 - 3000K - 34 lm/Module W27 - 2700K - 26 lm/Module

Lumen Output:12v DC 1.02 Watts per Module

linearchain3 IP68

W130 - 13000K - 90 lm/Module W75 - 7500K - 100 lm/Module W65 - 6500K - 103 lm/Module White - 4200K, 6500K, 7500K, 13000K

W75 - 7500K - 45 lm/Module W65 - 6500K - 45 lm/Module

W42 - 4200K - 84 lm/Module

linearchain* Supplied with Pre-Mounted Adhesive Tape* Flexible Chain - can be split between any Modules

* 12v 155 Degree Beam Angle

* Standard Module Spacing - 150mm or 200mm

* 5 Year Warranty

LED Linear Flexible Chain

Ø3,5

16,8

10,2

D

38,5

6,1 3,129,3

D -0/+10

Ø3,5

41,5

6,129,3

3,1

10,2

32,3

ledconnect* Homogenous Light Distribution - No Spotting* Push in Cable Connections

* 24v Constant Voltage Supply

* Philips Lumileds

* 2 Year Warranty

Lumen Output:

White - 3000K, 4000K, 5000K, 6000KColour - Red, Green, Blue and Amber

24v DC 8.5 Watts per Module (36 LED’s per Module)

ledconnect8.5

W40 - 4000K - 800 lm per Module W30 - 3000K - 750 lm per Module

W60 - 6000K - 900 lm per Module W50 - 5000K - 850 lm per Module

15.00

5.00xulux.com.au LED Connect– LC8.5 watts 3000k xulux.com.au LED Connect– LC8.5 watts 3000k

50.00

140.00

280.00

6.50Ø4.007.70

4

linearwash* Homogenous Light Distribution - No Spotting* Self Assemble or Pre-Assembled

* Philips Lumiled 7.7mm Pitch LED Engine

* Range of Colour Options

* 2 Year Warranty

Lumen Output:

White - 3000K, 4000K, 5000K, 6000KColour - Red, Green, Blue and Amber

24v DC 8.5 Watts per Module (36 LED’s per Module)

linearwash3030

4000K - 2675Lm per Metre 3000K - 2500Lm per Metre

6000K - 2850Lm per Metre

Fitting Lengths from 290mm to 1970mm

30mm

30mm

Lumen Output:

* Epistar 3528/5050/355 LED Engine

White - 2700K, 4000K, 6000K Colour - Red, Green, Blue and Yellow

Available in IP20, IP67 and IP67UV

linearflex

4.8 watts per metre (60 x 3528 LED’s per metre)

linearflex 4.8

W60 - 6000K - 410 lm/Metre W40 - 4000K - 380 lm/Metre W27 - 2700K - 360 lm/Metre

* Supplied with 3M Adhesive Tape* All Tape Cuttable at up to 100mm Centres

* 24v 120 Degree Beam Angle

Lumen Output:


Available in IP20, IP67 and IP67UV19.2 watts per metre (240 x 3528 LED’s per metre)

linearflex 19.2

W60 - 6000K - 1640 lm/Metre W40 - 4000K - 1520lm/Metre W27 - 2700K - 1440 lm/Metre

Lumen Output:



linearflex 9.6


Lumen Output:



linearflex 14.4


Sample of product range - other LED strips available on request

5

* 3 Year Warranty

neoled* Extremely Flexible (120mm Bend Diameter)* 24v 160 Degree Beam Angle* Available in a Range of Colours and Colour Temperatures

* IP68 Submersible Rating

21.00

11.50

16.00

16.00

neoled top neoled side

Max length 10 metres if fed from one end.

Max length 20 metres if fed from both ends.

160 Beam Angle

120mm Bend

Flame Resistant

UVResistant

Solvent Resistant

SaltwaterResistant

IK08Protection

IP68

IP68Protection

Lumen OutputW27 - 2700k - 400 Lm/MetreW44 - 4400k - 500 Lm/MetreW57 - 5700k - 520 Lm/MetreW65 - 6500k - 600 Lm/Metre

LED Wattage 10.5 watts per metre 24 volt DC(108 x 3014 LED’s per metre)

Lumen OutputW27 - 2700k - 320 Lm/MetreW44 - 4400k - 330 Lm/MetreW57 - 5700k - 350 Lm/MetreW65 - 6500k - 380 Lm/Metre

LED Wattage 12 watts per metre 24 volt DC(60 x 5050 LED’s per metre)

Lumen Output:

Red, Green and Blue Multi Chip60x 5050 LED’s per metre

linearflex RGB

G - 240 lm/MetreR - 120 lm/Metre

Available in IP20, IP67 and IP67UV

B - 150 lm/Metre

IP67IP20

IP67UV

CRI>80

CRI>80

CRI>80

CRI>80

Lumen Output:


Available in IP20 or IP67 (with silicone sleeve)7.7 watts per metre (96 x 3528 LED’s per metre)

linearflex SV Side View


14.4 watts per metre

CRI>80

WIDE

120

micro1506

micro1707

micro1612

micro1715

micro1919

micro2206

micro2515

* Complete with 4 x End Caps per Length* Complete with PMMA Matt Opal Diffusser

extrusion Natural Anodised 6063g Aluminium16mm

16mm

13.4m

m

11111 444422222 33333 55555

* Available in Lengths of 2.0 Metres

* Natural Anodised Aluminium* Hidden Screw or Clip Mounting

minicurve2020

miniquad1616

miniquadC1616

miniquad3030

Sample of profile range - other profiles available on request

miniquadC3030

minisquare2020

highline

6

12 V DC - 35va, 60va, 100va, 150va

Short Circuit/Over Voltage/Temp Protection

Universal AC Input 108VAC - 264 VAC

IP20 Protection Rating

PSU35/60/100/150-IP20-12

WMPSU150/240/320-IP20-12

extrusion

12 V DC - 150va, 240va, 320va




24 V DC - 35va, 60va, 100va, 150va




PSU35/60/100/150-IP20-24

WMPSU150/240/320-IP20-24

24 V DC - 150va, 240va, 320va




PSU35/60/100/150/240/320-IP67-12

12 V DC - 35va, 60va,100va,150va, 240va, 320va




PSU35/60/100/150/240/320-IP67-24

24 V DC - 35va, 60va,100va,150va, 240va, 320va




12 V DC - 40va, 80va, 120va, 150va, 185va, 240va, 320va




24 V DC - 40va, 80va, 120va,150va, 185va, 240va, 320va



IP67 Protection Rating3 in 1 Dimming (1-10Vdc, PWM Signal & Ohm) 3 in 1 Dimming (1-10Vdc, PWM Signal & Ohm)

PSU40/80/120/150/185/240/320D-IP67-12 PSU40/80/120/150/185/240/320D-IP67-24

* 30, 60 or 90 Degree Linear Lens* Flexible Mounting Options

* Clear, Frosted or Matt Standard Lens* 6063 Grade Aluminium

7

power supplies* 12v and 24v DC* Short Circuit/Over Voltage/Temp Protection

* IP20 and IP67* 5 Year Warranty

16

2

micro-multi-S micro-multi-H

Linear lens 30° Linear lens 60°

9,5

16,4+0.3-0.1

20,1

18,1+0.30

+0.70

2,3+

0,3

0

Linear lens 90°

20,118,1+0.30

+0.70

16,4+0.3-0.1

8 2,3+

0,3

0

length axiscross axis

lengh axiscross axis

lengh axiscross axis

Light distribution 30° Light distribution 60° Light distribution 90°

Linear Lens Options

16,4

9,7 2,3

20,1

18,1

+0.3-0.1

+0,3

0

+0.30

+0.70

led controllers

TM08LED Touch Panel

Features* Stand Alone LED Touch Panel* Elegant Glass Panel Design* High Precision Touch Control* Multicolour Pulley Touch Key -* Select up to 64 Colours via Multicolour Touch Key* Pre-Programmed with 7 Standard Colours and 4 standard chases including speed adjustment

LEDriveDMX4Desk Top DMX RGB/W LED Constant Voltage Controller

Features* DMX-512 Input and Output* External Power Supply 10-24 VDC* Terminal Strip Output and Input Connectors* 2 Main Indication LED’s* Two Operating Modes: 1 - Pre-Programmed Lighting Scenes (RDM) 2 - Control via DMX (1 x RGB/W Output)

DMX34512Remote DMX RGB LED Constant Voltage Controller

Features* DMX-512 Input and Output* External Power Supply 10-24 VDC* RJ45 or XLR Output and Input Connectors* Two Operating Modes: 1 - Pre-Programmed Lighting Scenes 2 - Control via DMX (1 x RGB Output)

* Pre-Programmed options* External power supplies

* DMX or stand alone control

* Wall mount and desktop mount

* 1 Year Warranty

Sample of product range - other controllers available on request

8

Sensors - Stand Alone* Absense and Presence settings* Adjustable Light Level Settings

* Infra Red Programmable

* Flush or Surface Mounting

* 5 Year Warranty

9

Wall Mount Microwave Sensor BTMWWM110 1 x 10amp relayBTMWWM110IP 1 x 10amp relay IP66BTIR IR programming remote

BTMWWM

BTMW110SW 1 x 10amp relay with switch option BTMW110SWDD 1 x 10amp relay & Digital Dim/SwitchBTMW110SWAD 1 x 10amp relay & 1-10vdc Dim/SwitchBTMW206SW 2 x 6amp relay with switch optionBTIR IR programming remoteBTSM Surface mounting kit

Flush Mount Microwave Sensor BTMW

22 m

6 m

Detection area: ceiling

BTMWT110SW 1 x 10amp relay with switch option BTMWT110SWDD 1 x 10amp relay & Digital Dim/SwitchBTMWT110SWAD 1 x 10amp relay & 1-10vdc Dim/SwitchBTMWT206SW 2 x 6amp relay with switch optionBTIR IR programming remoteBTSM Surface mounting kit

BTPIRHM110SW 1 x 10amp relay with switch option BTPIRHM110SWDD 1 x 10amp relay & Digital Dim w/- switch optBTPIRHM110SWAD 1 x 10amp relay & 1-10vdc Dim w/- switch optBTIR IR programming remoteBTSM Surface mounting kit

15 m

40 m

26 m

16 m10

m

6 m

Detection Area

Sensor Parameters360 degree MW/PE/IR receiveDetection ModesAbsence and presence settingsLight LevelAdjustable light level settingsLow light or constant light modesIR ProgammableIR Programmable vis BTIR

BTPIRBM102 1 x 2amp relayBTPIRBM102DD 1 x 2amp relay & Digital Dim with switch optionBTPIRBM102AD 1 x 2amp relay & 1-10vdc Dim with switch optionBTIR IR programming remote

2.8 m

7 m

Detection Area

Flush Mount Light Level Sensor BTPE

Flush Mount Passive Infrared Sensor BTPIR

BTPIRHM

2.8 m

12 - 16

m

* with sensitivity set to maximum

Detection Area

2.8 m

7 m

Detection Area

BTPIR108 1 x 8amp relayBTPIR110SW 1 x 10amp relay with switch option BTPIR110SWIP 1 x 10amp relay with switch option - IP55 BTPIR110SWDD 1 x 10amp relay & Digital Dim with switch optBTPIR110SWAD 1 x 10amp relay & 1-10vdc Dim with switch optBTPIR206SW 2 x 6amp relay with switch optionBTIR IR programming remoteBTSM Surface mounting kit

IR Programmable IR Programmable via BTIR

Sensor Parameters360 degree MW/PE/IR receiveLight LevelAdjustable light level settingsLow light or constant light modes

BTPE110SW 1 x 10amp relay with switch option BTPE110IP66 1 x 10amp relay with switch option - IP66BTPE110SWDD 1 x 10amp relay & Digital Dim w/- switch optBTPE110SWAD 1 x 10amp relay & 1-10vdc Dim w/- switch optBTIR IR programming remoteBTSM Surface mounting kit

Flush Mount Passive Infrared Sensor


BTPIRBM Batten Mount Passive Infrared Sensor


Flush Mount Microwave Tilting Sensor BTMWTSensor Parameters360 degree MW/PE/IR receiveDetection ModesAbsence and presence settingsLight LevelAdjustable light level settingsLow light or constant light modesIR ProgammableIR Programmable vis BTIR


BTIR Programmer


Sensors - Stand Alone

10

Sensor Matrix

Please refer to full data datasheets available from www.xulux.com.au for complete specifications

Run on �me range Sensor range Sensor range Parameters Setup

Product CodeRange (m) [email protected]

Number of ChannelsPE Cell

Switch or Dim

Moun�ng Type: recessed / surface / in

luminaireshortest to longest

distance - �ne movement

distance - walking

Manual or IR Remote

PE Flush CH 1 CH 2 CH 1 CH 2

BTPE110SW - 1 Channel Switched - Switch 10A -Ceiling / Recessed /

Surface- - - IR Remote BTIR

BTPE110IP66 - 1 Channel Switched - Switch 10A -Ceiling / Recessed /

Surface- - - Manual

BTPE110SWDD - 1 Channel Switched DSI/DALI Dim 10A 10 ballastsCeiling / Recessed /


BTPE110SWAD - 1 Channel Switched 1-10 volt Dim 10A 10 ballastsCeiling / Recessed /


PIR Flush CH 1 CH 2 CH 1 CH 2

BTPIR108 7 1 Channel Switched - Switch8A inc, 6A �, 3A C�-lv

- Ceiling / Recessed 10 sec - 30 minutes @ 2.8 m ht = 6 m dia - Manual

BT110PIRSM 7 1 Channel Switched - Switch10A inc, 6A �, 3A C�-lv

- Surface 10 sec - 30 minutes @ 2.8 m ht = 7 m dia - Manual

BTPIR110SW 7 1 Channel Switched - Switch 10A -Ceiling / Recessed / Surface / Luminaire

10 sec - 99 minutes 5 m ht 7 m dia IR Remote BTIR

BTPIR110SWIP 7 1 Channel Switched - Switch 10A -Ceiling / Recessed / Surface / Luminaire


BTPIR110SWDD 7 2 Channel Switched DSI/DALI Switched and dim 10A 10 ballasts Ceiling / Recessed / Surface / Luminaire


BTPIR110SWAD 7 2 Channel Switched 1-10 volt Switched and dim 10A 10 ballasts Ceiling / Recessed /

Surface10 sec - 99 minutes 5 m ht 7 m dia IR Remote BTIR

BTPIR206SW 7 2 Channel Switched Switched Switch 6A 6ACeiling / Recessed / Surface / Luminaire


PIR High Mount CH 1 CH 2 CH 1 CH 2

BTPIRHM110SW Up to 40 - Switched - Switch 10A -Ceiling / Recessed / Surface or Luminaire

10 sec - 99 minutes @ 10 m th = 20 m dia @ 15 m ht = 30 m dia

@ 10m ht = 26 m dia @ 15 m ht = 40 m dia

IR Remote BTIR

BTPIRHM110DD Up to 40 2 Channel Switched DSI/DALI Switched and dim 10A 10 ballasts Ceiling / Recessed / Surface or Luminaire

10 sec - 99 minutes @ 10 m ht = 20 m dia @ 15 m ht = 30 m dia

@ 10 m ht = 26 m dia @ 15 m ht = 40 m dia

IR Remote BTIR

BTPIRHM110AD Up to 40 2 Channel Switched 1-10 volt Switched and dim 10A 10 ballasts Ceiling / Recessed / Surface or Luminaire

10 sec - 99 minutes @ 10 m ht = 20 m dia @ 15 m ht = 30 m dia

@ 10 m ht = 26 m dia @ 15 m ht = 40 m dia

IR Remote BTIR

PIR Ba�en Mount CH 1 CH 2 CH 1 CH 2

BTPIRBM102 7 1 Channel Switched - Switch 2A - Luminaire 10 sec - 99 minutes @ 2.8 m ht = 5 m dia @ 7 m ht = 10 m dia

@ 2.8 m ht = 9 m dia @ 7 m ht = 16 m dia

IR Remote BTIR

BTPIRBM102DD 7 2 Channel Switched DSI / DALI Switched and dim 2A 10 ballasts Luminaire 10 sec - 99 minutes @ 2.8 m ht = 5 m dia @ 7 m ht = 10 m dia

@ 2.8 m ht= 9 m dia @ 7 m ht = 16 m dia

IR Remote BTIR

BTPIRBM102AD 7 2 Channel Switched 1-10 volt Switched and dim 2A 4 ballasts Luminaire 10 sec - 99 minutes @ 2.8 m ht = 5 m dia @ 7 m ht = 10 m dia

@ 2.8 m ht= 9 m dia @ 7 m ht = 16 m dia

IR Remote BTIR

Microwave Flush CH 1 CH 2 CH 1 CH 2

BTMW110SW 12 - 16 1 Channel Switched - Switch 10A -Ceiling / Recessed /

Surface10 sec - 99 minutes 12 16 IR Remote BTIR

BTMW110SWDD 12 - 16 2 Channel Switched DSI/DALI Switch and Dim 10A 10 ballasts Ceiling / Recessed /


BTMW110SWAD 12 - 16 2 Channel Switched 1-10 volt Switch and Dim 10A 10 ballasts Ceiling / Recessed /


BTMW206SW 12 - 16 2 Channel Switched Switched Switch 6A 6ACeiling / Recessed /


Microwave Wall Mnt CH 1 CH 2 CH 1 CH 2

BTMWWM110 30 1 Channel Switched - Switch 10A - Wall 10 sec - 99 minutes 20 30 IR Remote BTIR

BTMWWM110IP 30 1 Channel Switched - Switch 10A - Wall 10 sec - 99 minutes 20 30 IR Remote BTIR

Microwave Tilt CH 1 CH 2 CH 1 CH 2

BTMWT110SW 22 - 30 1 Channel Switched - Switch 10A -Ceiling / Recessed /


BTMWT110SWDD 22 - 30 2 Channel Switched DSI/DALI Switched and dim 10A 10 ballasts Ceiling / Recessed /


BTMWT110SWAD 22 - 30 2 Channel Switched 1-10 volt Switched and dim 10A 10 ballasts Ceiling / Recessed/


BTMWT206SW 22 - 30 2 Channel Switched Switched Switch 6A 6ACeiling / Recessed /


Load Type Controlled

Max. Load (refer to data sheet)

SENSOR

Roca Gallery Showroom in London features Helvar lighting control system. It was awarded the Best Retail Project of the year 2012 in Lighting Design Awards.

Helvar is an international lighting technologies company specialised in energy efficient components and solutions for lighting and lighting control systems. Helvar is a family-owned company established in 1921.

In addition to luminaire manufacturers, our customer base comprises electrical and lighting designers and electrical contractors. Our wide understanding of both components and lighting systems enables us to design versatile and energy efficient lighting solutions.

We serve our customers locally in over 40 countries. Our headquarters are located in Finland, as are our component product development and manufacturing operations. Our

lighting control competence centre is in England. Worldwide, our customers are served by offices in eight countries and our global network of partners.

Our Controls Business Line integrates our lighting control components into viable control applications and systems services. Our key areas consist of architectural projects as well as energy efficient lighting control solutions for commercial applications. Helvar is also the leading supplier of lighting systems for cruise liners. Our Components Business Line offers LED drivers, magnetic and electronic ballasts for fluorescent and high-intensity discharge lamps. Helvar’s components are known for their excellent reliability, energy efficiency and versatility. Environmental perspectives are integrated to all of our products through life-cycle and eco-design principles.

INTRODUCTION

DIGIDIM for DALIHelvar’s DIGIDIM range gives you the products to fulfill any lighting control requirement. When using the PIR movement and Constant Light DIGIDIM can achieve maximum energy saving, prolonged lamp life and reduced cost of ownership.

DIGIDIM KEY FEATURES Dimmers and output units to suit any common load type Flexible design with chassis based, DIN-rail & wall mount mounted enclosures

Standard mains cables for DALI Cost effective with easy installation Control panels available in a wide range of finishes Infrared receiver on all control panels Control panels available in European and Australian sizes All dimmers are voltage stabilised Thermal cut-out protection on all dimmers in the event of overheating

User-friendly configuration software

11

helvar

freedom in lighting

freedom in lighting

BASIC SYSTEM BOUNDARIES Up to 63 addresses per system

Up to 250 mA DALI supply per system

10 mA per modular button panel 2 mA per load interface

Out of the box operationPush On - Push Off.Rotate Right Ramp Up.Rotate Left Ramp Down.

Rotary Panel 100BDALI PSU 402

DALI Ballasts and/orDALI LED Drivers

Rotary 100 - Push On/Push Off - Rotation 5-100%

Slider 110 - Fade from Off to 100%

131B - Push On/Push Off - Push and Hold Ramping

122 - Push and Hold Ramping

121 - Push On/Push Off - Push and Hold Ramping

132B - Push and Hold Ramping

DIGIDIM basic offers a unique solution for single room environments without the need for DALI controllers or software. Panels connect directly to DALI ballasts and/or drivers and operate with the function set shown on the panels below.

You can connect a single panel or multiple panels together in a room giving you the ability to operate from any of these panel locations.

12

* 2 Year Warranty

helvar basic* Range of Panels and Finishes* Switching and Dimming Capabilities

* No Programming Required

basic

Typical room with a single panel. Typical room with two rotary panels at each entrance.Dimming control from either location with last level on feature.

Typical room with two On/Off panels at each entrance,combined with a rotary dimmer panel from a third location.

Out of the box operation

Button 1 - On/Ramp Up Button 2 - Off/Ramp Down.

Out of the box operation

Push On - Push Off.Rotate Right Ramp Up\ Left Ramp Down

13

DIGIDIM self program systems offer a unique solutionfor single room environments, where all you need todo to programme the system is push and hold downbuttons 3 and 4 on a switch panel to upload DALIscenes to DALI load devices, DALI LED drivers or DALI fluorescent ballasts. You can also modify the light output using any of the control panels. Press and hold down any scene button to store that particular light level andreplay this stored scene every time you push that button.

SELF PROGRAM SYSTEM BOUNDARIES Up to 63 addresses per system


10 mA per modular button panel 2 mA per load interface Each load may be programmed with up to 15 scenes

Two Finger Programming

Press and hold buttons3 and 4 to upload DALIscenes to the DALI ballasts

137B - 4 Button Scene Controller 134B - 4 Button Scene and Off 134B - 4 Button Scene with Modifiers and Off 136B - 7 Button Scene and Off

124 - 4 Button Scene and Off 125 - 4 Button Scene with Modifiers and Off 126 - 7 Button Scene and Off

Once you have pressed and held buttons 3 and 4,DALI scenes 1, 2, 3 & 4 (100%, 75%, 50% & 25%)are uploaded to the DALI Ballasts and LED drivers. You can use the up and down arrows to modify the light outputs and store that scene on any other numbered button on the system.

14

helvar self programfreedom in lighting

* 2 Year Warranty

* Range of Panels and Finishes* Switching and Dimming Capabilities

* Two Finger Programming

self program

Once you have uploaded the DALI scenes to the DALI ballast, you can modify any numbered button to recall a scene of your choice.

Two Finger ProgrammingPress and hold buttons3 and 4 to upload DALI

scenes to the DALI ballasts

15

440

444

503AV

312 315 441

DIGIDIM stand-alone systems are typically small

to mid-size applications that operate on a single

DALI subnet.

User interfaces can be added to allow for manual

scene setting, and multisensors can be used

to increase energy efficiency in the application.

Program and commission a DIGIDIM stand

alone system using Toolbox Software.

SYSTEM BOUNDARIES Up to 63 addresses per system


10 mA per modular button panel

10 - 40 mA per sensor

2 mA per load interface

Each system may be configured with up to

16 groups

Each load may be programmed with up to

15 scenes

User Interfaces

Sensors

Modular Control Panels

Any latching or momentary switches via input units

LCD Touchpanel

3rd party AV-systems via RS232 interface

(3rd party sensors)

TOOLBOX PROGRAM

16

helvar toolbox

freedom in lighting

* 2 Year Warranty

* Full Range of Panels and Finishes* Switching, Dimming and Interface Capabilities

* Full Range of Controllers

toolbox

455

490 494 498

452

416S / 425S 458/DIM8 + 458M1/8S10

458/SW8 + 458M1/8S10

458/CTR8 + 458M1/8S10

472 474

LED

(401) / (402) (510)

Dimmers

Relay Units

Ballasts, drivers and controllers

Accessories

System set-up and diagnosis with Toolbox-software

USB Interface

toolbox

17

Commercial LED and Lighting Control Solutions

xuluxxulux pty ltd14/388 Newman Rd Geebung Qld 4034P 07 3172 7131 F 07 3161 5598E [email protected] www.xulux.com.au Control - Illuminate

Specifications are subject to change without noticeCopyright - Xulux 2014 - SFCR1JAN14

Documents

LED Short Form Catalogue Page 1 - Front Page - Xulux Short Form...Max length 20 metres if fed from both ends. 160 Beam Angle 120mm Bend Flame Resistant UV Saltwater Solvent Resistant