2
LED Indicator Lamp SKAS07x LED-Anzeigeleuchte SKAS07x RoHS Compliant LED-Anzeigeleuchte mit Blendenkopf und Snap-in Befestigung. Großer Abstrahlwinkel. LED von der Rückseite wechselbar. LED Indicator Lamp with lens head and snap-in mounting. Large angle of radiation. LED through rear panel changeable. Gehäuse: Grau mit Snap-in Befestigung Einbau-Öffnung: Ø7+0,2mm Schutzart: IP40 Anschluss: Pins Löttemperatur: 260°/5 Sek. Betriebsspannung: LED-Spannung DC Housing: Grey with snap-in mounting Mounting-hole: Ø7+0,2mm Protection class: IP40 Connection: Pins Soldering temperature: 260°/5 sec. Operating voltage: LED voltage DC Specification Spezifikation Material Teil Material Material Part Materialien Gehäuse Polycarbonat Housing Polycarbonate Isolierteil Polycarbonat Insulating part Polycarbonate Blendenkopf Polycarbonat farbig transparent Lens head Polycarbonate colored transparent Storage Temperature -40°C/+100°C Operation Temperature -30°C/+75°C Betriebstemperatur -30°C/+75°C Lagertemperatur -40°C/+100°C Options Optionen Litzenanschluss Wire connection Einbau anderer LED Typen gleicher Bauform auf Anfrage möglich Mounting of other LED types in the same size on request Seite 1 Signal-Construct elektro-optische Anzeigen und Systeme GmbH email [email protected] web http://www.signal-construct.de Tel. +49 7233 9531-0 Fax +49 7233 9531-29 Brückenäckerweg 4 DE 75223 Niefern Num: 1093 Stand 12.02.14

LED-Anzeigeleuchte LED Indicator Lamp SKAS07x · 120° lm 20 mA 60000 h SKAS070 LED-Anzeigeleuchte ROT Blendenkopf A LED indicator lamp RED cover plate A cd/m² 2.10 V 29 mcd/ @ 20,000

Embed Size (px)

Citation preview

Page 1: LED-Anzeigeleuchte LED Indicator Lamp SKAS07x · 120° lm 20 mA 60000 h SKAS070 LED-Anzeigeleuchte ROT Blendenkopf A LED indicator lamp RED cover plate A cd/m² 2.10 V 29 mcd/ @ 20,000

LED Indicator LampSKAS07x

LED-AnzeigeleuchteSKAS07x

RoHSCompliant

LED-Anzeigeleuchte mit Blendenkopf undSnap-in Befestigung. Großer Abstrahlwinkel.LED von der Rückseite wechselbar.

LED Indicator Lamp with lens head andsnap-in mounting. Large angle of radiation.LED through rear panel changeable.

Gehäuse: Grau mit Snap-in BefestigungEinbau-Öffnung: Ø7+0,2mmSchutzart: IP40Anschluss: PinsLöttemperatur: 260°/5 Sek.Betriebsspannung: LED-Spannung DC

Housing: Grey with snap-in mountingMounting-hole: Ø7+0,2mmProtection class: IP40Connection: PinsSoldering temperature: 260°/5 sec.Operating voltage: LED voltage DC

SpecificationSpezifikation

MaterialTeil Material MaterialPartMaterialien

Gehäuse Polycarbonat Housing Polycarbonate

Isolierteil Polycarbonat Insulating part Polycarbonate

Blendenkopf Polycarbonat farbigtransparent

Lens head Polycarbonate coloredtransparent

Storage Temperature -40°C/+100°C

Operation Temperature -30°C/+75°CBetriebstemperatur -30°C/+75°C

Lagertemperatur -40°C/+100°C

OptionsOptionenLitzenanschluss Wire connectionEinbau anderer LED Typen gleicher Bauform aufAnfrage möglich

Mounting of other LED types in the same size onrequest

Seite 1

Signal-Construct elektro-optischeAnzeigen und Systeme GmbH

email [email protected] http://www.signal-construct.de

Tel. +49 7233 9531-0Fax +49 7233 9531-29

Brückenäckerweg 4DE 75223 Niefern

Num: 1093 Stand 12.02.14

Page 2: LED-Anzeigeleuchte LED Indicator Lamp SKAS07x · 120° lm 20 mA 60000 h SKAS070 LED-Anzeigeleuchte ROT Blendenkopf A LED indicator lamp RED cover plate A cd/m² 2.10 V 29 mcd/ @ 20,000

Farb

eCo

lor

Stro

mCu

rren

t

Lich

tstä

rke

Lum

inou

s In

tens

ity

Leis

tung

Pow

er

Lich

tstr

omLu

min

ous

Flux

Span

nung

Volt

age

Vollw

inke

lVi

ewin

g An

gle

Lebe

nsda

uer

Life

-Tim

e

Artikel/ Part Artikel-Text Part-Text

Leuc

htdi

chte

lum

inou

s de

nsit

y

cd/m²2.00 V 19 mcd/

@ 20,000 mAred 40 mWrot

60000 h120° lm 20 mALED-Anzeigeleuchte ROT Blendenkopf A LED indicator lamp RED cover plate ASKAS070

cd/m²2.10 V 29 mcd/

@ 20,000 mAyellow 42 mWgelb

60000 h120° lm 20 mALED-Anzeigeleuchte GELB Blendenkopf A LED indicator lamp YELLOW cover plate ASKAS071

cd/m²2.10 V 19 mcd/

@ 20,000 mAgreen 42 mWgrün

60000 h120° lm 20 mALED-Anzeigeleuchte GRÜN Blendenkopf A LED indicator lamp GREEN cover plate ASKAS072

FPI

The life time of an LED is defined as decrease of brightness by 50% ofthe initial value

Lebensdauer: Die Lebensdauer einer LED ist definiert als Abnahme derHelligkeit auf 50% des Ausgangswertes

Seite 2

Technische Änderungen vorbehalten. Datenblatt unterliegt nicht demÄnderungsdienst.

Specifications are subject to change without notice.

Num: 1093-SKAS07X Stand 12.02.14

Signal-Construct elektro-optischeAnzeigen und Systeme GmbH

email [email protected] http://www.signal-construct.de

Tel. +49 7233 9531-0Fax +49 7233 9531-29

Brückenäckerweg 4DE 75223 Niefern

Wir achten bei Entwicklung und Herstellung unserer Produkte auf einenmöglichst geringen Einsatz von Ressourcen und auf niedrigenEnergiebedarf im Betrieb.Bitte prüfen Sie, ob es unbedingt erforderlich ist, das gesamteDokument zu Drucken. So schonen Sie zusätzlich Ressourcen undunsere Umwelt.

We care for environment when producing and manufacturing ourproducts. Also we care for a low power consumption and a lowconsumption of resources.Please consider environmental responsibility before printing thisdocument

The technical data are typical figures.Die angegebenen technischen Daten sind typische Durchschnittswerte.

Helligkeitswerte sofern nicht anders angegeben gemessen nach IEC127. Photometry according to IEC127 unless otherwise indicated.

Wir empfehlen das Dokument mit der Einstellung "Seitengrößeanpassen" zu Drucken

We recommend to print the document with option "Fit to Page"