Upload
norzawani-md-akhir
View
219
Download
0
Embed Size (px)
Citation preview
7/31/2019 Lecture 1.1 Introduction
1/14
KKKM2013/KKKL2114
(INTRODUCTION MECHANICAL AND ELECTRICAL)
PENGENALAN MEKANIK & ELEKTRIK
ASAS ELEKTRIK DAN MEKANIK
1
7/31/2019 Lecture 1.1 Introduction
2/14
LECTURERS
En Azli Ariffin (JKMB)
En Mohd Faizal Mat Tahir (JKMB) En. Helmi Sanusi (JKEES)
En Mohd Hafiz Baharudin (JKEES)
En. Mohd Asrol (JKEES)
2
7/31/2019 Lecture 1.1 Introduction
3/14
COURSE SYNOPSIS
The aim of the course is to introduce the
emphasis on the relationship between
design, fabrication, testing, material and
manufacture. The course will be
conducted into two phases, namely, asmall amount of theoretical part and
practical work, which includes: product
engineering, manufacturing technology;
machining & welding, electronic circuit,electrical wiring, computer assembly
and engineering safety.3
7/31/2019 Lecture 1.1 Introduction
4/14
REFERENCES
Ritchie, J and Simpson G. 1998. Engineering
Applications: A Project Based Approach. Oxford:
Butterworth Heinemann.
Kibbe R.R., et al. 1999. Machine Tool Practices. 6th
ed. New York: Prentice Hall.
Krar S.F., et. al. 1996. Technology of Machine
Tools. 5th ed. New York: Glencoe McGrawHill.
Dungan, C & Stocks, E.G. 1998. Siri Bekalan
Elektrik (4 volumes), Golden Books Centre, KL.
Hibbeler, R.C.2002. Structural Analysis. 5th Ed.Prentice-Hall.
4
7/31/2019 Lecture 1.1 Introduction
5/14
MODESOF DELIVERY
Lecturesstudents from JKMB & JKEES are combined into 1group
place : DK1/DK2
8 weeks lecturers
Laboratory/Workshop SessionsStudent have to attend 9 laboratory/workshoppractice and submit 9 individual written reports atthe end of laboratory/workshop session
3 hours for each laboratory/workshop practice
session5 laboratory/workshop practice from mechanicaldepartment and 4 from electrical department
5
7/31/2019 Lecture 1.1 Introduction
6/14
LECTURE SCHEDULE
6
Wednesday
DK2
10.00-12.00 (2 hours)
Friday *
DK1
8.00-9.00 (1 hour)
7/31/2019 Lecture 1.1 Introduction
7/14
LABORATORY SCHEDULE
7
Will be informs later
7/31/2019 Lecture 1.1 Introduction
8/14
TEACHING PLAN
8
Week Topics1 Introduction to Safety Practices in
Laboratory and Workshop
2 Machining Theory
3 Soldering4 Fitting & Welding Fundamentals
5 Digital
6 Welding Process
7 Electrical Wiring8 Computer Peripheral
7/31/2019 Lecture 1.1 Introduction
9/14
COURSE OUTCOMESAbility to:
Understand and able to practice safety procedures inlaboratory and workshop
Understand and able to use the correct technique inusing machine and laboratory and workshop equiptment
Understand and able to use the correct technique inwelding and fabrication
Understand and able to use the correct technique forindentifying electronic components, circuit assembly and
electrical wiring
Understand and able to use the correct technique forcomputer assembly
9
7/31/2019 Lecture 1.1 Introduction
10/14
MARKS DISTRIBUTION
10
Item Percentage
Checklist on practical
Hands-on in the laboratory/workshop
40-60%
Laboratory report 10-20%
Final Semester Exam 40-60%
7/31/2019 Lecture 1.1 Introduction
11/14
PROBLEMS ENCOUNTEREDIN
DELIVERY
Inadequate number of relevant equipment
for performing the practical sessions,
students need to share the equipment
Limited amount of time for the practical
hands-on sessions because large number
of students, need to rotate from one
laboratory/workshop to the other
11
7/31/2019 Lecture 1.1 Introduction
12/14
LABORATORY
2-1
Machining & Metal Removal
Processes (i)
2-2
Machining & Metal Removal
Processes (ii)
2-3 Welding Processes
2-4 Sheet Metal Processes
2-5 Fitting Technology
2-6 Electrical Wiring
2-7 Computer Assembly
2-8 Electronic Circuit Soldering
2-9 Digital12
7/31/2019 Lecture 1.1 Introduction
13/14
13
7/31/2019 Lecture 1.1 Introduction
14/14
Don't forget to check IFOLIO regularly
14