Upload
trinhthuan
View
286
Download
3
Embed Size (px)
Citation preview
INTRODUCCIÓN CIMENTACIÓNES
Índice
1- GENERALIDADES E INTRODUCCIÓN
2.- CONDICIONAMIENTO DE DISEÑO
2.1 SEGÚN LA ESTRUCTURA
2.2. SEGÚN EL TERRENO.
3.- TIPOS DE CIMENTACIÓN
3.1 CIMENTACIONES SUPERFICIALES
3.2 CIMENTACIONES SEMIPROFUNDAS
3.3 CIMENTACIONES PROFUNDAS
2. CONDICIONAMIENTO DE DISEÑO
2.1 SEGÚN LA ESTRUCTURA
N = Peso de la estructura que se transmite al cimiento.
Pt = Peso propio del terreno que hay sobre el cimiento.
Pg= Peso propio del cimiento.
Nd=Nxyf= Peso de la estructura que se transmite al cimiento mayorado.
Mj = Mxyf = Momento que la estructura transmite al cimiento mayorado
2. CONDICIONAMIENTO DE DISEÑO2.2. SEGÚN EL TERRENO.
2.2.1.- CLASIFICACIÓN DE LOS TERRENOS DE CIMENTACIÓN.
- Terrenos sin cohesión.
- Terrenos deficientes.
- Terrenos coherentes.
- Rocas.
2.2.2.- PRESIONES ADMISIBLES SOBRE EL TERRENO
- Presiones en las capas profundas.
- Presión general en terrenos coherentes.
2. CONDICIONAMIENTO DE DISEÑO2.2. SEGÚN EL TERRENO.
2.2.3.- CONSIDERACIÓN DE LOS ASIENTOS.
- Cuando calculados los asientos o sus diferencias entre las diversas
zonas del edificio, no sean de valor tolerable, se reducirán las
presiones admisibles hasta conseguir que lo sean.
2.2.4.- CARGAS EXCÉNTRICAS.
- Cuando la actuación de las cargas sobre el cimiento produzca por su
excentricidad presiones no uniformes sobre el terreno, se admitirá en
los bordes un aumento del 25% en la presión admisible, siempre que
la presión en el centro de gravedad de la superficie de apoyo no
exceda de la presión admisible.
2. CONDICIONAMIENTO DE DISEÑO2.2. SEGÚN EL TERRENO.
2.2.5.- RESPUESTA DEL TERRENO.
-Zapatas rígidas aisladas. -Zapatas flexibles aisladas.
-Viga de cimentación.
3.- TIPOS DE CIMENTACIONES3.1. CIMENTACIONES SUPERFICIALES
3.- TIPOS DE CIMENTACIONES3.1. CIMENTACIONES SUPERFICIALES
3.1.1.- ZAPATAS AISLADAS
3.- TIPOS DE CIMENTACIONES3.1. CIMENTACIONES SUPERFICIALES
3.1.2.- ZAPATAS COMBINADAS Y CORRIDAS
1. Terreno compactado
2. Armadura inferior de la zapata
3. Calzo de apoyo de parrilla 4. Junta de hormigonado
5. Armadura del pilar 6. Concreto de limpieza 5/10 cm
3.- TIPOS DE CIMENTACIONES3.1. CIMENTACIONES SUPERFICIALES
3.1.3.- EMPARRILLADOS
3.- TIPOS DE CIMENTACIONES3.1. CIMENTACIONES SUPERFICIALES
3.1.4.- LOSAS
POZOS DE CIMENTACIÓN
- Cimentación con una profundidad de firme entre 3 y 6 metros. Pozos de Concreto que llegan hasta el firme y sobre los cuales se realiza la zapata de manera convencional
3.- TIPOS DE CIMENTACIONES3.2. CIMENTACIONES SEMIPROFUNDAS
3.- TIPOS DE CIMENTACIONES3.3. CIMENTACIONES PROFUNDAS
3.3.1.- POR LA FORMA DE TRABAJO
a) pilotes por fuste.
b) pilotes por punta.
3.3.2.- POR EL TIPO DE PILOTE
3.- TIPOS DE CIMENTACIONES3.2. CIMENTACIONES PROFUNDAS
1 Por el tipo de material del
pilote
a) Concreto “in situ”.
b) Concreto prefabricado.
c) acero.
d) madera.
e) mixtos, como los de acero
tubular rodeados y rellenos
de mortero.
3.- TIPOS DE CIMENTACIONES3.2. CIMENTACIONES PROFUNDAS
Por la forma de la sección transversal
La forma de la sección transversal del pilote podrá ser circular
o casi circular (cuadrada, hexagonal u octogonal)
Por el procedimiento constructivo
a) pilotes prefabricados hincados terreno.
b) pilotes hormigonados “in situ”.
Pilotes colados “in situ”
Pilotes prefabricados hincados
3.- TIPOS DE CIMENTACIONES3.2. CIMENTACIONES PROFUNDAS