Upload
buithien
View
268
Download
7
Embed Size (px)
Citation preview
EDAC Aero Rotating Components275 Richard StreetNewington, CT 06111 • USA
Tel. +1 860 667-2134Fax +1 860 667-0057
EDAC Aero Precision Components21 Spring LaneFarmington, CT 06032 • USA
Tel. +1 860 677-2603Fax +1 860 676-4347
EDAC Aero Engine Components Repair35 Holland DriveNewington, CT 06111 • USA
Tel. +1 860 667-6611Fax +1 860 667-6644
www.edactechnologies.com
LEADING THE WAY
IN AEROSPACE
PRODUCTS & SERVICES
EDAC Aero Rotating Components’ has been an industry benchmark in precision
metalworking. The company combines extensive experience, unequaled capabilities
and single-minded dedication to quality to fulf i l l any customer need. We are
comfortable in satisfying customer demands from individual prototypes, small to
moderate runs and high volume production.
EDAC Aero Rotating ComponentsProducing complex rotating
components and assemblies for
aerospace and industrial turbine
markets, we routinely work with
titanium, nickel (inclusive of difficult
to machine powder metal) and steel
alloys. Complementing our extensive
manufacturing capabilities are
in-house service operations including:
shot-peen, eddy current, MPI, FPI,
cold expansion of highly stressed
holes, abrasive flow, balance and
stack projection inspection.
Precision Components Capabilities:
• Materials: Castings and Forgings of Aluminum, Titanium, Nickel & Cobalt Based Alloys
• True 5-Axis Milling within 93” x 72” x 63” withArticulating Head and Built-in Probing System
• Two Mazak Mill/Turn Machine Tools w/ Pallet Changers
• 5th Axis Rotary Tables Allow for Machining Rings up to 140” Diameter
• Cases – All Engine Sections
• Diffusers, Hubs, Spacers, Sync Rings
• Rotating Seals, Swash Plates, Cowl Supports, Stators
• Approved by Most Major OEMs
• Advanced High Speed Spindles for Machining Aluminum
Rotating Components Capabilities:
• Disks from 6” to 60” diameter
• Shafts from 20” to 40” length
• Disks (Fan through LPT)
• IBRs/Blisks from 10” to 40” diameter
• Manned Space Flight Engine Components
• Hubs
• Impellers
• Fan “Stub” Shafts
• HPC Shafts
• HPT Shafts
• Rotating Seals
• Landing Gear Components
EDAC Aero Precision ComponentsPrecision Components has been serving the aerospace, turbine engine and industrial gas turbine
markets for over 60 years specializing in the machining and assembly of highly engineered
rotating and static components. Our Large Machining facility has focused on large diameter
cases and similar components: both rough and finish machining for over 15 years.
EDAC Aero — From Inlet to Exhaust, Specializingin Complex Rotating and Structural Components
EDAC Aero Engine Components RepairFAA approved repair station specializing in the maintenance, repair and overhaul of commercial
and military engine components as well as land based turbines since 1981. We are an approved
repair station by the following regulatory agencies: FAA Repair Station # 6ECR093B; CAAC Repair
Station # F00100039; EASA Repair Station # EASA.145.6090.
Recognized as a Preferred MRO Supplier for:
• LPT Disks
• HPT Disks
• LPT Shafts
• HPT Shafts
• Rotating LPT Air Seals
• Rotating HPT Air Seals
• Compressor Disks
• Compressor Hubs
Components Repair Capabilities Supporting the Following Engine Programs:
• CF6-50
• CF6-80
• CFM56-3
• CFM56-5
• CFM56-7
• JT8D
• JT9D All Series
• JT8D-200
• PW2000
• PW4000 (94”, 100” & 112”)
• V2500
Both EDAC Aero Rotating Components and
EDAC Aero Precision Components offer the
following comprehensive services:
Engineering Services:
• Dedicated Manufacturing & Process Planning Engineers
• Turning & Milling Programming Utilizing Unigraphics, Mastercam & Catia
• 5 – Axis Milling Programming
• Tool Concept & Design
• Full-time Continuous Improvement Director
Quality Assurance:
• Independently Certified in ISO 9001, AS 9100, ISO 14001
• Contract Review Process Insures 100% Compliance toCustomer Specifications
• Climate Controlled CMM’s
• Process Operator Certification
• Internal Audit Monitor Systems / Identify Training Needs & Process Improvements
• Quality Engineering
EDAC Aero – Dedicated to Serve in the Global Market:
• EDAC Aero Integrated Management Systems Insures Error-Free Order Performance
• Daily Production Control Reviews to Meet Critical Delivery Timelines
• Superior Customer Service at All Organizational Levels
• Committed to Excellence and Continuous Improvement
EDAC Aero Rotating Components275 Richard StreetNewington, CT 06111 • USA
Tel. +1 860 667-2134Fax +1 860 667-0057
EDAC Aero Precision Components21 Spring LaneFarmington, CT 06032 • USA
Tel. +1 860 677-2603Fax +1 860 676-4347
EDAC Aero Engine Components Repair35 Holland DriveNewington, CT 06111 • USA
Tel. +1 860 667-6611Fax +1 860 667-6644
www.edactechnologies.com
LEADING THE WAY
IN AEROSPACE
PRODUCTS & SERVICES