8″ Schd 40 PVC 8.625 7.961 545.3 160 303.51 258.58 Tubing Data Density (lbs./cu.in.) / Approx. Tensile Strength (PSI @ 73°F) Low Density Polyethylene (LDPE): 0.0333 / 2,300 High Density Polyethylene (HDPE): 0.0347 / 4,500 Reinforced Vinyl: 0.0498 / 1,458 Polypropylene: 0.0326 / 5,000 FEP: 0.0758 / 3,000 Nominal Size Average O.D. Average I.D. Nominal Weight per 100 ft.(lbs) Max Work Pressure (PSI ) @75 F O.D. Volume of water per 100 ft (gal) I.D. Volume of water per 100 ft (gal) Min bending radius (in) 1/4″ LDPE 0.25 0.170 1.1 120 0.255 0.118 1.0 3/8″ HDPE 0.375 0.250 2.5 300 0.573 0.255 2.5 1/2″ HDPE 0.500 0.375 3.6 225 1.020 0.573 6.0 5/8″ HDPE 0.625 0.50 4.6 150 1.594 1.020 10.0 11/16″ LDPE 0.6875 0.50 7.28 125 1.928 1.020 5.0 3/4″ reinforced vinyl 0.75 0.50 18.0 162 2.295 1.020 4.0 ° Page 2 of 2 Pipe & Tubing Data | INW 3/2/2015 http://inwusa.com/technical-library/reference-materials/pipe-and-tubing-data/

LDPE Tubing Volumn

Download PDF Report

Upload
krishna
View
213
Download
0

Embed Size (px)

DESCRIPTION

LDPE

Citation preview

8 Schd 40 PVC

8.625 7.961 545.3 160 303.51 258.58

Tubing DataDensity (lbs./cu.in.) / Approx. Tensile Strength (PSI @ 73F)Low Density Polyethylene (LDPE): 0.0333 / 2,300High Density Polyethylene (HDPE): 0.0347 / 4,500Reinforced Vinyl: 0.0498 / 1,458Polypropylene: 0.0326 / 5,000FEP: 0.0758 / 3,000

Nominal Size

Average O.D.

Average I.D.

Nominal Weight per 100 ft.(lbs)

Max Work Pressure (PSI) @75 F

O.D. Volume of water per 100 ft (gal)

I.D. Volume of water per 100 ft (gal)

Min bending radius (in)

1/4 LDPE 0.25 0.170 1.1 120 0.255 0.118 1.0

3/8 HDPE 0.375 0.250 2.5 300 0.573 0.255 2.5

1/2 HDPE 0.500 0.375 3.6 225 1.020 0.573 6.0

5/8 HDPE 0.625 0.50 4.6 150 1.594 1.020 10.0

11/16 LDPE

0.6875 0.50 7.28 125 1.928 1.020 5.0

3/4 reinforced vinyl

0.75 0.50 18.0 162 2.295 1.020 4.0

Page 2 of 2Pipe & Tubing Data | INW

3/2/2015http://inwusa.com/technical-library/reference-materials/pipe-and-tubing-data/