LC/LD SERIES - Axe & Status...• rigid spindle is supported by high precision taper roller bearings. • 4 steps auto gears change. • Spindle speed ranges are automatically changed

CNC Lathes

LC/LD SERIES

LC/LD SERIES CNC Lathes

LC/LD SerieS CNC LatheS 1

CNC Lathes

LC/LD SerieS CNC LatheS2 LC/LD SerieS CNC LatheS 3

LC34 (34.2” Swing) / LC38 (38.1” Swing)

Choice of distance between centres:1,150 / 2,150 / 3,150 / 4,150 / 5,150 / 6,150 / 7,150 / 8,150 mmSpindle Bore: 153 to 660 mm

• h4-250 ,V8-100 hydraulic turret.

• Free running centre to quill with 165 mm diameter.

• Motorised tailstock body movement.

• Fanuc Ol-tD build-in manual guide i.

• Bed width: 560mm.

LD45 (44” Swing) / LD48 (48” Swing)

Choice of distance between centres:1,200 / 2,200 / 3,200 / 4,200 / 5,200 / 6,200 / 7,200 / 8,200 mmSpindle Bore: 153 to 660 mm

• Heavy duty flat bed construction.

• Choice of turrets: h4, h6, V8.

• Choice of chucks: 3-jaw hydraulic chuck, 3-jaw pneumatic chuck, or double chucks.

• Bed width: 610 mm.

• Free running centre to quill with 165 mm diameter.

• turn-Mill function (Opt.).

• hydraulic, V8 electric, live tooling or double turrets.

LC/LD SERIES

LC Series

LD Series

CNC Lathes

Features

Headstock and Spindle

• the solid box construction casting provides excellent rigidity for heavy cutting.

• all gears in the headstock are hardened and precisely ground.

• rigid spindle is supported by high precision taper roller bearings.

• 4 steps auto gears change.

• Spindle speed ranges are automatically changed by M code.

• Infinitely variable speeds are commanded by S code.

• an auto-lubrication system is equipped for headstock gears and spindle.

• Double chucks strengthen the stability for turning a long workpiece through spindle.

Bed and Base

• Perfect one piece rigid construction.

• Bed and base are made of “Meehanite” cast iron. after proper stress relieving processes, the bed way is induction heat treated to hrC 52~54 and precisely ground. the hardened bed provides excellent stability and rigidity.

• Machine bed consists of triple “V” and 1 flat bedway.

• the front chip auger and rear chip conveyor make up an optimum chip removing system.


LC/LD SERIES

Features

Turret, Carriage and Cross Slide

• turcite B lining is applied on cross slide and carriage for reducing friction.

• Precision ball screws are equipped on the X and Z axes.

• Z-axis ball screws are protected by a stainless steel shield to prevent rusting and chip damage.

• rigid hydraulic h4 or V8 auto tool change turret.

Tailstock

• Precision taper roller bearings are equipped on the spindle of the built-in tailstock.

• the quill is heat treated and precisely ground.

• the quill adopts a Mt#6 dead centre or live centre for small workpieces. a chuck with nose (ai-5) can be mounted on it for larger workpieces.

• the tailstock is rigidly fastened by a stopper to prevent slippage.

• the tailstock body and quill position are powered and can be controlled from the control panel.

• a selection of manual or electric operation provides easy quill positioning which saves time.

CNC Lathes


LC/LD SERIES

LC/LD SerieS CNC LatheS LC/LD SerieS CNC LatheS8 9

CNC LathesLC/LD SERIES

Optional

H4 Hydraulic

• holds 4 tools.

• each can be quickly swiveled and clamped into cutting positions.

• Suitable for turning, facing and boring.

Double Turrets

• a combination of two turrets for machining complex workpieces at one time.

• Suitable for high production requirements.

Heavy Duty Boring Attachment

• Boring bar diameter: 6”. • Length: 1200/1500mm.

• tool size: 32mm. • Clamping diameter: 6”.

• Sleeve: 050mm~0120mm for option.

• installed on cross slide easily.

• the boring depth and diameter can be controlled by program.

• Depending on client applications, different size sleeves are available.

H4-VDI Quick Change Hydraulic Turret

• 4 way quick change.

• high repeat accuracy.

• rapid index.

3-Jaw Pneumatic Chuck

• With super concentricity and speedy clamping.

• Clamping pressure is adjustable, preventing workpieces from squeezing.

• applicable to big spindle bores.

Double Chuck Adapter and Chuck Guard

• installed in the rear of spindle where an extra chuck can be mounted.

• a workpiece, such as long shaft or pipe, clamped at both ends of spindle gets better support.

V8 Hydraulic Turret

• holds 8 tools. • random tool selection.

• high indexing accuracy and quick tool change.

• turret clamping is controlled by hydraulic power for outstanding rigidity and stability.

Roller Bracket

• equipped on the machine especially for heavy duty big diameter workpieces.

• has a wide range of clamping capacity.

3-Jaw Hydraulic Chuck

• Holds worpieces firmly and provides efficient chucking.

• Various chuck diameters to choose from.

• Both hard jaws and soft jaws are available.

Steady Rest

• 80mm quill diameter with heavy loaded bearing.

• enhance rigidity and stable performance in machining.

• Clamping capacity from 30~750mm for client’s difference requirements.



Milling Function

Five Degree Spindle Indexing System

• Spindle can be indexed in every five degrees.

• M code controls spindle indexing.

• More economical.

• equipped with hydraulic disk brake.

Contouring Machining

• X,Z and C axes can be operated sychronously to do irregular and difficult machining.

Integrated Spindle Index System with Live Tooling Turret

1 Multiple functions: turning, milling, drilling, boring, tapping and threading.2 enhanced accuracy: Prevent accuracy loss on loading and unloading.3 Save time: Complete different jobs on one machine.

Live Tooling Turret

• 12 stations live tooling turret with rapid tool change.

• easily manageadble tools.

• Powerful drilling, tapping and milling capacity.

• all of the 12 positions can use rotating tools.

C-Axis Spindle Orientation System

• high analytic servo motor integrates with high accuracy reduction gear to control the spindle micro orientation.

• Contouring machining is available.

• Spindle micro index at the required position.

• equipped with linear scale to ensure the indexing accuracy.



CNC Controller

Conversational Function – Manual Guide i

Bar Machining (Roughing):including general thread, metric thread, unified thread, PT thread and PE thread.

Threading:including general thread, metric thread, unified thread, PT thread and PE thread.

Grooving:including outer, inner and face grooving.

Canned Cycle for Drilling:including centre drilling, drilling, reaming, boring and tapping.

X Area Cutting Function:When the optional function”-X area Cutting Function” is available, it is possible to select the cutting in +X area in the cycle motions excepting hole machining processes.

STD: Fanuc Oi-TD

• tFt-LCD colour screen.

• “Manual guide i” conversational system for option.

• Powerful built-in PMC.

• Variety of display units.

• User friendly operation.

• 3D dynamic graphic display.

• help function.

• alarm history / operation history.

• Simple operation programming support tool.

• thread repair function.

Siemens 828D

• high-performance panel-based CNC control.

• robust panel front made of magnesium die-cast.

• 10.4” colour tFt display.

• Maintenance-free design (no buffer battery required).

• 4-axis simultaneous interpolation (X,Y,Z rotary axis).

• 100 settable work piece zero offsets.

• Built-in iSO code interpreter.

• Wide range of turning cycles for standard geometrics.

• Graphic CNC simulation plane data.

• all-in one for tool and magazine data.

• extension of CNC memory by user CF-card on front panel.

Fanuc Oi-tD is the standard control with a user-friendly control panel. the control is designed on the movable door which allows it to rotate 120 degrees and getting closer to the workpiece. it is very convenient for checking the tooling and observing the machining situation.



Dimension Drawings:

Machine Dimensions and Weight Machine Dimensions and Weight

LC series Between centres 1000 1500 2000 3000 4000

34”LxWxh (mm)N.W/G.W (kg)

5900x2735x217010000 / 12000

6400x2735x217010500 / 12500

6900x2735x217012000 / 14000

7900x2735x217013500 / 15700

8900x2735x217015000 / 17400

38” LxWxh (mm)N.W/G.W (kg)

5900x2735x217010500 / 12500

6400x2735x217011000 / 13000

6900x2735x217012500 / 14500

7900x2735x217014000 / 16200

8900x2735x217015500 / 17900

LC series Between centres 5000 6000 7000 8000


9900x2735x217016500 / 19100

10900x2735x217018600 / 20800

10900x2735x217018600 / 20800

12900x2735x217021000 / 24200


9900x2735x217017000 / 19600

10900x2735x217018500 / 21300

10900x2735x217020000 / 23000

12900x2735x217021500 / 24700

LD series Between centres 800 1000 1500 2000 3000


5500x3000x225011000 / 13000

6000x3000x22509800 / 11400

6500x3000x225011500 / 13300

7000x3000x225013200 / 15200

7500x3000x225014900 / 17100


5500x3000x225011500 / 13500

6000x3000x225010300 / 13800

6500x3000x225012000 / 13800

7000x3000x225013700 / 15700

15400 / 17600

LD series Between centres 4000 5000 6000 7000 8000


8500x3000x225016600 / 19000

9500x3000x225018300 / 20900

11000x3000x225020600 / 22800

12000x3000x225021700 / 24700

13000x3000x225023400 / 26600


8500x3000x225017100 / 19500

9500x3000x225018800 / 21400

11000x3000x225020500 / 23300

12000x3000x225022500 / 25200

13000x3000x225023900 / 27100

LC Series LD Series



Specifications – LC Series Specifications – LD Series

Model LC 34 LC 38Swing Over Bed 870mm 970mmSwing Over Cross Slide 500mm 600mmCentre height 440mm 490mmWidth of Carriage 885mmWidth of Cross Slide 350mmBetween centres 1200 / 1700 / 3000 / 2200 / 3200 / 4200 / 5200 / 6200 / 7200 / 8200 mm

Control StD. FaNUC 0itDOPt. FaNUC 2litB / SieMeNS 810D / FaGOr 8055tC

Width of Bed 560mm (22”)Bed Way 3-V way with 1 flat wayMachine Length 5900 / 6400 / 6900 / 7900 / 8900 / 9900 / 10900 / 11900 / 12900 mmHeadstock:Spindle Bore ∅105mm (4”) ∅153mm (6”) ∅230mm (9”) ∅305mm (12”)Spindle Nose a2-8 a2-11 a2-15 a2-20Spindle Speed 13~1200rpm 6.5~600rpm 6~400rpm 4~400rpmSpindle Centre Mt#6Spindle motor 22/26KW (FaNUC ∝i) (StD) / 30/37KW (OPt)Turret

turret ModeStD. h4-250 hydraulic / V8-100 hydraylic

OPt.h4-250 VDi hydraulic / Quick change turret /

V12-100L hydraulic / V12-live tooling (ODt-N-25)tool Size 32mmTailstock:Quill Diameter 165mm rotary quillQuill traverse 200mmtailstock Centre Mt#6Body Movement MotorisedQuill Movement electrical/Manual (StD) / hydraulic (OPt)Feed:X-axis rapid traverse 6M/minX-axis Ballsrew Diameter ∅40mm*p5X-axis Feed range 0.1mm/min~3000mm/minX-axis traverse 500mmX-axis Servo Motor 3KW (FaNUC ∝i)Z-axis rapid traverse 1M~5M:6M/min / 6M~8M:5M/minZ-axis Ballscrew Diameter 1M~5M:∅63mm*p10 / 6M~8M:∅80mm*p10Z-axis Feed range 0.1mm/min~3000mm/minZ-axis traverse 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 mm

Z-axis transmitting1M~3M: Directly coupling

4M~8M: Servo motor tranmitted through 1:4 precision gear reducerZ-axis Servo Motor 4KW (FaNUC ∝i)Standard AccessoriesLubrication Pump 25W

Coolant Pump StD. 1/2hP high pressureOPt. 15 bar high pressure

hydraulic Pump 2hPChip removing Front chip conveyor + rear chip conveyor

GuardStD. rear splash guard + Front two doorsOPt. Fully enclosed guarding

Notes: 1. X and Z axes actual cutting diamtere will change when euipped with different turrets. 2. Spindle speed will change according to different motors. 3. Distance between centres will change based on installing different types of tailstocks. 4. Machine between centre over 6000mm, Z-Axis linear is required to option. 5. Specification subject to change without prior notice.

Model LD 45 LD 48Swing Over Bed 1120mm 1220mmSwing Over Cross Slide 750mm 850mmCentre height 575mm 625mmWidth of Carriage 950mmWidth of Cross Slide 400mmBetween centres 800 / 1200 / 1700 / 2200 / 3200 / 4200 / 5200 / 6100 / 7100 / 8100 mm

Control StD. FaNUC 0itDOPt. FaNUC 2litB / SieMeNS 810D / FaGOr 8055tC

Width of Bed 610mm (24”)Bed Way 3-V way with 1 flat wayMachine Length 5500 / 6000 / 6500 / 7000 / 7500 / 8500 / 9500 / 11000 / 12000 / 13000 mmHeadstock:Spindle Bore ∅153mm (6”) ∅230mm (9”) ∅305mm (12”)∅305mm (12”)∅505mm (20”)Spindle Nose a2-11 a2-15 a2-20 a2-28 a2-28Spindle Speed 9~600rpm 9~500rpm 7~400rpm 6~300rpm 5~250rpmSpindle Centre Mt#6Spindle motor 22/26KW (FaNUC ∝i) (StD) / 30/37KW (OPt)Turret

turret ModeStD. h4-350 hydraulic / V8-160 hydraylic

OPt.h4-350 VDi hydraulic / Quick change turret /

V12-100L hydraulic / V12-live tooling (ODt-N-25)tool Size h4-350: 32mm / V8-160: 40mm hydraulicTailstock:Quill Diameter 165mm rotary quillQuill traverse 250mmtailstock Centre Mt#6Body Movement MotorisedQuill Movement electrical/Manual (StD) / hydraulic (OPt)Feed:X-axis rapid traverse 6M/minX-axis Ballsrew Diameter ∅40mm*p5X-axis Feed range 0.1mm/min~3000mm/minX-axis traverse 650mmX-axis Servo Motor 3KW (FaNUC ∝i)Z-axis rapid traverse 1M~5M:6M/min / 6M~8M:5M/minZ-axis Ballscrew Diameter 1M~5M:∅63mm*p10 / 6M~8M:∅80mm*p10Z-axis Feed range 0.1mm/min~3000mm/minZ-axis traverse 800 / 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 mm

Z-axis transmitting1M~3M: Directly coupling

4M~8M: 1:4 precision gear reducerZ-axis Servo Motor 4KW (FaNUC ∝i)Standard AccessoriesLubrication Pump 25W

Coolant Pump StD. 1/2hP high pressureOPt. 15 bar high pressure

hydraulic Pump 2hPChip removing Front chip conveyor + rear chip conveyor

GuardStD. rear splash guard + Front two doorsOPt. Fully enclosed guarding Only available for 1M~5M)

Notes: 1. X and Z axes actual cutting diamtere will change when euipped with different turrets. 2. Spindle speed will change according to different motors. 3. Distance between centres will change based on installing different types of tailstocks. 4. Machine between centre over 6000mm, Z-Axis linear is required to option. 5. Specification subject to change without prior notice.

Model LC LC LC LD LD LD LD

Spindle Bore 6” a2-11 9” a2-15 12” a2-20 6” a2-11 9” a2-15 12” a2-20 16” a2-28

tailstock Quill Diameter 165mm 165mm 165mm 165mm 165mm 165mm 165mm

Max. load between centre

1

6000Kgs 7000Kgs 7500Kgs 7000Kgs 8000Kgs 9000Kgs 9500Kgs

Max. load between centre plus 1 steady rest

2


Max. load between centre plus 2 steady rest

3


Max. load with one chuck only

4




LC Equiped Fanuc 22/26 KW Spindle Motor (STD)

105mm Spindle Bore

105mm Spindle Bore

153mm Spindle Bore

153mm Spindle Bore

230mm Spindle Bore

230mm Spindle Bore

305mm Spindle Bore

305mm Spindle Bore

LD Equiped Fanuc 30/37 KW Spindle Motor (OPT)

Loading Capacity

0 1500 3000

Motor Speed (/min)4500 6000 7000

0

8

16

24

32Output (kw)

Out

put

(kw

)

Motor Speed VS. Output

Continuousoperating zone

26kw

22kw

22kw

18.5kw

operating zone 26

0 1000

1150

22kw

18.5kw

2000

Motor Speed (/min)3000 4000 5000 6000

0

10

20

30

40

50

Output (kw)

Out

put

(kw

)

Motor Speed VS. Output


3500

30min, S3 40%operating zone

37kw

30kw

0 1500 3000

Motor Speed (/min)4500 6000 7000

0

30

60

90

120

150

180Torque (N.m)

Torq

ue (N

*m)

Motor Speed VS. Torque


operating zone 22

0 1000

1150

2000

Motor Speed (/min)3000 4000 5000 6000

0

100

200

300

400Torque (N.m)

Torq

ue (N

*m)

Motor Speed VS. Torque


3500

30min, S3 40%operating zone

RMP Section

0

10000

20000

30000

40000

NM

M41

M42

M43M44

250rpm 841 499rpm 421 749rpm 280

6rpm 32813

23rpm 9170

70rpm 2983

46rpm 4585

141rpm 149169rpm 3061

211rpm 994

13rpm 16279

19rpm 10881

26rpm 8140

92rpm 2295282rpm 746

999rpm 210

RMP Section

0

10000

20000

30000

40000

50000

NM

M41

M42

M43M44

165rpm 2265 330rpm 1132 496rpm 753

9rpm 41517

24rpm 15569

64rpm 583848rpm 7784

129rpm 289772rpm 5190

193rpm 1936

18rpm 20758

28rpm 13345

37rpm 10099

96rpm 3892258rpm 1448661rpm 565

RMP Section

0

10000

20000

30000

40000

NM

M41

M42

M43M44

249rpm 843 499rpm 421 749rpm 280

6rpm 35000

22rpm 9540

70rpm 3000

45rpm 4667

140rpm 150068rpm 3088

211rpm 995

12rpm 17500

19rpm 11053

25rpm 8400

91rpm 2308281rpm 747

999rpm 210

RMP Section

0

10000

20000

30000

40000

50000

NM

M41

M42

M43

M44165rpm 2265 330rpm 1132 496rpm 753

9rpm 41517

24rpm 15569

64rpm 583848rpm 7784

129rpm 289772rpm 5190

193rpm 1936

18rpm 20758

28rpm 13345

37rpm 10099

96rpm 3892258rpm 1448667rpm 565

RMP Section

0

10000

20000

30000

40000

50000

NM

M41

M42

M43M44

184rpm 1141 369rpm 569 554rpm 379

5rpm 42000

18rpm 11667

52rpm 403845rpm 4667

104rpm 201956rpm 3750

156rpm 1346

10rpm 21000

15rpm 14000

21rpm 10000

74rpm 2838208rpm 1010

739rpm 284

RMP Section

0

10000

20000

30000

40000

50000

60000

NM

M41

M42

M43

M44126rpm 2965 252rpm 1483 378rpm 988

7rpm 53379

18rpm 20758

52rpm 7186

36rpm 10379

105rpm 355955rpm 6794

157rpm 2380

15rpm 24910

23rpm 16246

30rpm 12455

73rpm 5118210rpm 1779504rpm 741

RMP Section

0

10000

20000

30000

40000

50000

60000

NM

M41

M42

M43M44

142rpm 1479 284rpm 739 427rpm 492

4rpm 52500

15rpm 14000

40rpm 525030rpm 7000

80rpm 262546rpm 4565

120rpm 1750

8rpm 26250

12rpm 17500

17rpm 12353

61rpm 3443160rpm 1313

569rpm 369

RMP Section

0

20000

40000

60000

80000

NM

M41

M42

M43

M4498rpm 3813 196rpm 1906 294rpm 1271

6rpm 62275

14rpm 26689

42rpm 8896

28rpm 13345

82rpm 439642rpm 8896

128rpm 2919

12rpm 31138

18rpm 20758

25rpm 14946

57rpm 6555171rpm 2185392rpm 953



Side Version Interference

H4 Hydraulic

• holds 4 tools.

• each can be quickly swiveled and clamped into cutting positions.

• Suitable for turning, facing and boring.

LC34 – H4-250

• tool size: 32mm.(1) Swing over bed.(2) Swing over cross slide.

LC34 – CLT-V8-100


LC38 – H4-250


LC38 – CLT-V8-100


LD45 – H4-350


LD45 – CLT-V8-100


LD48 – H4-350


LD48 – CLT-V8-100


V8 Hydraulic Turret

• holds 8 tools.

• high indexing accuracy and quick tool change.

• random tool selection.

• turret clamping is controlled by hydraulic power for outstanding rigidity and stability.

Unit 2, Saxon Park, Bond avenue

Bletchley, Milton Keynes MK1 1QU UK

tel: 44 (01908) 647707

Fax: 44 (01908) 648087

email: [email protected]

Web: www.axestatus.com

ISO9001

Documents

LC/LD SERIES - Axe & Status...• rigid spindle is supported by high precision taper roller bearings. • 4 steps auto gears change. • Spindle speed ranges are automatically changed