Upload
guaymason
View
152
Download
2
Tags:
Embed Size (px)
Citation preview
SERVICE MANUALLC-32/37D43U
No. SX6Y9LC37D43U
LCD COLOR TELEVISION
LC-32D43ULC-37D43UMODELS
CONTENTS
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace these parts with spec-ified ones for maintaining the safety and performance of the set.
This document has been published to be used forafter sales service only.The contents are subject to change without notice.
DIFFERENCES FROM BASE MODELLIST OF CHANGED PARTS ............................. i
SAFETY PRECAUTIONIMPORTANT SERVICE SAFETY PRE-CAUTION ......................................................... iiPRECAUTIONS A PRENDRE LORS DE LA REPARATION .............................................iiiPRECAUTIONS FOR USING LEAD-FREE SOLDER ............................................... iv
CHAPTER 1. SPECIFICATIONS[1] SPECIFICATIONS.........................................1-1
CHAPTER 2. OPERATION MANUAL[1] OPERATION MANUAL...................................2-1
CHAPTER 3. DIMENSIONS[1] DIMENSIONS.................................................3-1
Parts Guide
TopPage
In the interests of user-safety (Required by safety regulations in some countries) the set should be restored to itsoriginal condition and only parts identical to those specified be used.
This model is based on the LC-32D42U/LC-37D42U and partially modified.For the contents not covered in this Service Manual, accordingly, please refer to the LC-32D42U/LC-37D42U (S06X9LC32D42U) Service Manual.
OUTLINE
LC-32/37D43U
i
LCD TVLC-32D43UService ManualLC-32D43U/LC-37D43UMarketE
DIFFERENCES FROM BASE MODEL
LIST OF CHANGED PARTS
Refer to the PARTS GUIDE for CABINET PARTS, SUPPLIED ACCESORIES,PACKING PARTS and SERVICE JIGS.
Ref. No. Description LC-32D42U/LC-37D42U LC-32D43U/LC-37D43U NotePRINTED WIRING BOARD ASSEMBLIES
MAIN Unit DUNTKD862FM04 DUNTKD862FM04 No ChangesR/C, LED Unit DUNTKD909FM02 DUNTKD909FM02 No ChangesKEY Unit DUNTKD910FM02 DUNTKD910FM02 No ChangesAV TERMINAL Unit DUNTKD999FM04 DUNTKD999FM04 No ChangesPOWER Unit RDENCA198WJQZ RDENCA198WJQZ No Changes
LC-32/37D43U
LC-32D43U Service ManualSAFETY PRECAUTION
IMPORTANT SERVICE SAFETY PRECAUTION
1. For continued safety, no modification of any circuit should be
attempted.
2. Disconnect AC power before servicing.
RETURNING THE RECEIVER (Fire &
Shock Hazard)
Before returning the receiver to the user, perform the following
safety checks:
3. Inspect all lead dress to make certain that leads are not pinched,
and check that hardware is not lodged between the chassis and
other metal parts in the receiver.
4. Inspect all protective devices such as non-metallic control knobs,
insulation materials, cabinet backs, adjustment and compartment
covers or shields, isolation resistor-capacitor networks, mechanical
insulators, etc.
5. To be sure that no shock hazard exists, check for leakage current in
the following manner.
• Plug the AC cord directly into a 120 volt AC outlet.
• Using two clip leads, connect a 1.5k ohm, 10 watt resistor paral-
leled by a 0.15µF capacitor in series with all exposed metal cabinetparts and a known earth ground, such as electrical conduit or elec-
trical ground connected to an earth ground.
• Use an AC voltmeter having with 5000 ohm per volt, or higher, sen-
sitivity or measure the AC voltage drop across the resistor.
• Connect the resistor connection to all exposed metal parts having a
return to the chassis (antenna, metal cabinet, screw heads, knobs
and control shafts, escutcheon, etc.) and measure the AC voltage
drop across the resistor.
All checks must be repeated with the AC cord plug connection
reversed. (If necessary, a nonpolarized adaptor plug must be used
only for the purpose of completing these checks.)
Any reading of 0.75 Vrms (this corresponds to 0.5 mA rms AC.) or
more is excessive and indicates a potential shock hazard which
must be corrected before returning the monitor to the owner.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
SAFETY NOTICE
Many electrical and mechanical parts in LCD color television have
special safety-related characteristics.
These characteristics are often not evident from visual inspection, nor
can protection afforded by them be necessarily increased by using
replacement components rated for higher voltage, wattage, etc.
Replacement parts which have these special safety characteristics are
identified in this manual; electrical components having such features
are identified by " " and shaded areas in the Replacement Parts List
and Schematic Diagrams.
For continued protection, replacement parts must be identical to those
used in the original circuit.
The use of a substitute replacement parts which do not have the same
safety characteristics as the factory recommended replacement parts
shown in this service manual, may create shock, fire or other hazards.
///////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
Service work should be performed only by qualified service technicians who are thoroughly familiar with all safety checks and the
servicing guidelines which follow:
A V
CAUT ION : FOR CONT INUED
PROTECTION AGAINST A RISK OF
FIRE REPLACE ONLY WITH SAME
TYPE FUSE.
F701 (125V 8A),
F4701, F5701 (250V 3A ~ 115OC)
DVM
AC SCALE
1.5k ohm10W
TO EXPOSEDMETAL PARTS
CONNECT TOKNOWN EARTHGROUND
0.15 µF
TEST PROBE
WARNING
BEFORE
ii
LC-32/37D43U
PRECAUTIONS A PRENDRE LORS DE LA REP-ARATIONDe nombreuses pièces, électriques et mécaniques, dans les télévi-seur ACL présentent des caractéristiques spéciales relatives à la sé-curité, qui ne sont souvent pas évidentes à vue. Le degré de protec-tion ne peut pas être nécessairement augmentée en utilisant despièces de remplacement étalonnées pour haute tension, puissance,etc.Les pièces de remplacement qui présentent ces caractéristiques sontidentifiées dans ce manuel; les pièces électriques qui présentent cesparticularités sont identifiées par la marque " " et hachurées dans laliste des pièces de remplacement et les diagrammes schématiques.
Pour assurer la protection, ces pièces doivent être identiques à cellesutilisées dans le circuit d'origine. L'utilisation de pièces qui n'ont pasles mêmes caractéristiques que les pièces recommandées par l'usine,indiquées dans ce manuel, peut provoquer des électrocutions, incen-dies, radiations X ou autres accidents.
AVERTISSEMENT
1.
2.
3.
4.
5.
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
/////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
A V
Ne peut effectuer la réparation qu' un technicien spécialisé qui s'est parfaitement accoutumé à toute vérification de sécurité et aux
conseils suivants.
N'entreprendre aucune modification de tout circuit. C'est danger-eux.
Débrancher le récepteur avant toute réparation.
Inspecter tous les faisceaux de câbles pour s'assurer que les filsne soient pas pincés ou qu'un outil ne soit pas placé entre le châs-sis et les autres pièces métalliques du récepteur.
Inspecter tous les dispositifs de protection comme les boutons decommande non-métalliques, les isolants, le dos du coffret, les cou-vercles ou blindages de réglage et de compartiment, les réseauxde résistancecapacité, les isolateurs mécaniques, etc.
S'assurer qu'il n'y ait pas de danger d'électrocution en vérifiant lafuite de courant, de la facon suivante:
Brancher le cordon d'alimentation directem-ent à une prise de cou-rant de 120V. (Ne pas utiliser de transformateur d'isolation pourcet essai).
A l'aide de deux fils à pinces, brancher une résistance de 1.5 k10 watts en parallèle avec un condensateur de 0.15µF en sérieavec toutes les pièces métalliques exposées du coffret et une terreconnue comme une conduite électrique ou une prise de terrebranchée à la terre.
Utiliser un voltmètre CA d'une sensibilité d'au moins 5000� /V pourmesurer la chute de tension en travers de la résistance.
Toucher avec la sonde d'essai les pièces métalliques exposées quiprésentent une voie de retour au châssis (antenne, coffret métalli-que, tête des vis, arbres de commande et des boutons, écusson,etc.) et mesurer la chute de tension CA en-travers de la résistance.Toutes les vérifications doivent être refaites après avoir inversé lafiche du cordon d'alimentation. (Si nécessaire, une prised'adpatation non polarisée peut être utilisée dans le but de termin-er ces vérifications.)La tension de pointe mesurèe ne doit pas dépasser 0.75V (corre-spondante au courant CA de pointe de 0.5mA).Dans le cas contraire, il y a une possibilité de choc électrique quidoit être supprimée avant de rendre le récepteur au client.
PRECAUTION : POUR LA PRO-
TECTION CONTINUE CONTRE
LES RISQUES D'INCENDIE, RE-
MPLACER LE FUSIBLE
F701 (125V 8A),F4701, F5701 (250V 3A ~ 115OC)
VERIFICATIONS CONTRE L'INCEN-DIE ET LE
CHOC ELECTRIQUE
Avant de rendre le récepteur à l'utilisateur, effectuer les vérifica-
tions suivantes.
DVM
ECHELLE CA
1.5k ohm10W
0.15 µF
SONDE D'ESSAI
AUX PIECESMETALLIQUESEXPOSEES
BRANCHER A UNETERRE CONNUE
AVIS POUR LA SECURITE
•
•
•
•
iii
LC-32/37D43U
PRECAUTIONS FOR USING LEAD-FREE SOL-DEREmploying lead-free solder• “PWBs” of this model employs lead-free solder. The LF symbol indicates lead-free solder, and is attached on the PWBs and service manuals. The
alphabetical character following LF shows the type of lead-free solder.
Example:
Using lead-free wire solder• When fixing the PWB soldered with the lead-free solder, apply lead-free wire solder. Repairing with conventional lead wire solder may cause dam-
age or accident due to cracks.
As the melting point of lead-free solder (Sn-Ag-Cu) is higher than the lead wire solder by 40 °C, we recommend you to use a dedicated solderingbit, if you are not familiar with how to obtain lead-free wire solder or soldering bit, contact our service station or service branch in your area.
Soldering• As the melting point of lead-free solder (Sn-Ag-Cu) is about 220 °C which is higher than the conventional lead solder by 40 °C, and as it has poor
solder wettability, you may be apt to keep the soldering bit in contact with the PWB for extended period of time. However, Since the land may bepeeled off or the maximum heat-resistance temperature of parts may be exceeded, remove the bit from the PWB as soon as you confirm thesteady soldering condition.
Lead-free solder contains more tin, and the end of the soldering bit may be easily corroded. Make sure to turn on and off the power of the bit asrequired.
If a different type of solder stays on the tip of the soldering bit, it is alloyed with lead-free solder. Clean the bit after every use of it.
When the tip of the soldering bit is blackened during use, file it with steel wool or fine sandpaper.
• Be careful when replacing parts with polarity indication on the PWB silk.
Lead-free wire solder for servicing
Indicates lead-free solder of tin, silver and copper. Indicates lead-free solder of tin, silver and copper.
PARTS CODE PRICE RANK
PART DELIVERY DESCRIPTION
ZHNDAi123250E BL J φ0.3mm 250g (1roll)ZHNDAi126500E BK J φ0.6mm 500g (1roll)ZHNDAi12801KE BM J φ1.0mm 1kg (1roll)
iv
LC-32/37D43U
1 – 1
LC-32D43U Service Manual CHAPTER 1. SPECIFICATIONS
[1] SPECIFICATIONS
INPUT 6 15 pin mini D-sub, Audio in (Ø 3.5 mm jack)
*1Emergency alert messages via Cable are unreceivable.
*2The dimensional drawings are shown on the inside back cover.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specication changes for productimprovement without prior notice. The performance specication gures indicated are nominal values of production units.There may be some deviations from these values in individual units.
LCD panel
Number of dots
TVFunction
TV-standard (CCIR)
ReceivingChannel
VHF/UHF
CATV
Digital TerrestrialBroadcast (8VSB)
Audio multiplex
Audio out
Terminals Rear INPUT 1
INPUT 2
INPUT 3
INPUT 4
INPUT 5
ANTENNA
DIGITAL AUDIO OUTPUT
OUTPUT
OSD language
Power Requirement
Power Consumption
Weight
Dimension*2
(W H D)
Operating temperature
3,147,264 dots (1366 768 3 dots)
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
1-135ch (non-scrambled channel only)
2-69ch
BTSC System
10W 2
AV in, COMPONENT in
S-VIDEO in, AV in
Audio in, COMPONENT in
HDMI in with HDCP
Audio in, HDMI in with HDCP
75 Unbalance, F Type 1 for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)
Optical Digital audio output 1 (PCM/Dolby Digital)
Audio out
English/French/Spanish
AC 120 V, 60 Hz
32°F to 104°F (0°C to 40°C)
Item Model: LC-32D43U
32 Advanced Super View & BLACK TFTLCD
with stand
w/o stand
w/o stand
with stand
175 W (0.95 W Standby with AC 120V)
36.4 lbs./16.5 kg
43.0 lbs./19.5 kg
3111/32 23
13/64 9
37/64 inch
3111/32 20
59/64 3
53/64 inch
Digital cable*1
(64/256 QAM)1-135ch (non-scrambled channel only)
Model: LC-37D43U
37 Advanced Super View & BLACK TFTLCD
185 W (0.95 W Standby with AC 120V)
43.0 lbs./19.5 kg
50.7 lbs./23.0 kg
3561/64 25
27/32 11
35/64 inch
3561/64 23
37/64 3
53/64 inch
LC-32/37D43U
LCD TVLC-32D43UService ManualLC-32D43U/LC-37D43UMarketE CHAPTER 2. OPERATION MANUAL
[1] OPERATION MANUAL
Part names
POWER button
TV (Front)
Channel buttons(CH / )
Volumebuttons
(VOL / )
INPUT button
OPC indicator*
POWER indicator
OPC sensor*
Remote control sensor
NOTE
*OPC: Optical Picture Control
SLEEP indicator
TV (Rear)
HDMI terminal (INPUT 4)
INPUT 3 terminals
AUDIO OUTPUT terminals
HDMI terminal (INPUT 5)
DIGITAL AUDIO OUTPUT terminal
Antenna/Cable in
INPUT 1 terminals
AC INPUT terminal
AUDIO terminals (INPUT 5)
INPUT 2 terminals
PC IN terminals (INPUT 6)
+-
2 – 1
LC-32/37D43U
3
2
1 14
5
6
4
8
17
15
16
18
19
7
20
10
9
21
11 23
24
25
12
13 27
22
26
Part names
1 TV POWER:Switch the TV power on or entersstandby mode.
2 DISPLAY:Display the channel information.
3 SOURCE POWER: Turns the power of the externalequipment on and off.
4 External equipment operational buttons:Operatethe external equipment.
5 0 – 9:Set the channel.
6 • (DOT):
7 INPUT: Select a TV input source. (TV, INPUT 1,INPUT 2, INPUT 3, INPUT 4, INPUT 5, INPUT 6)
8 VOL / : Set the volume.
9 SURROUND: Select Surround settings.
10 FREEZE:Set the still image. Press again to return tonormal screen.
11 EXIT: Turn off the menu screen.
12 SLEEP:Set the sleep timer.
13 AUDIO: Selects the MTS/SAP or the audio modeduring multi-channel audio broadcasts.
14 FUNCTION: Switches the remote control for TV,CBL/SAT, VCR, DVD and AUDIO operation. Indicatorlights up for the current mode.
* To enter the code registration mode, you need topress FUNCTION and DISPLAY at the same time.
15 LIGHT :When pressed all buttons on the remotecontrol unit will light. The lighting will turn off if nooperations are performed within about 5 seconds.This button is used for performing operations in low-light situations.
16 VIEW MODE: Select the screen size.
17 ENT: Jumps to a channel after selecting with the 0–9buttons.
18 FLASHBACK:Return to the previous channel or
19 CH : Select the channel.
20 MUTE: Mute the sound.
21 MENU: Display the menu screen.
22 ENTER: Select a desired item on thescreen.
23 RETURN: Return to the previous menu screen.
24 FAVORITE CH
A, B, C, D: Select 4 preset favorite channels in 4different categories.
While watching, you can toggle the selected channelsby pressing A, B, C and D.
25 FAVORITE:Register favorite channel.
26 CC: Display captions from a closed-caption source.
27 AV MODE: Select an audio or video setting.(When the input source is TV, INPUT 1, 2 or 3:STANDARD, MOVIE, GAME, USER, DYNAMIC (Fixed),DYNAMIC. When the input source is INPUT 4, 5 or 6:STANDARD, MOVIE, GAME, PC, USER, DYNAMIC(Fixed), DYNAMIC)
Remote control unit
NOTE
• When using the remote control unit, point it at the TV.
external input mode.
2 – 2
LC-32/37D43U
QUICK REFERENCE
2
1 3
Hex key
Screw
Insert the stand into the openings on thebottom of the TV.
Insert and tighten the 4 screws into the 4holes on the rear of the TV.
Hex key
Screw
Soft cushion
NOTE
To detach the stand, perform the steps in reverse order.
Set the post for the stand unit onto thebox.
Attach the base to the post.
Insert and tighten the 5 screws into the 5holes on the bottom of the base.
Confirm that there are 9 screws (all the samesize) supplied with the TV.
Attaching the stand
Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from beingdamaged.
CAUTION
Attach the stand in the correct direction.Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
2 – 3
LC-32/37D43U
Picture
Setup
Audio
Option
Power Control
Digital Setup
Picture
Setup
Audio
Option
Power Control
Basic adjustment settings
Menu items for TV/INPUT 1/2/3 Menu items for HDMI/PC-IN
TrebleBassBalanceSurround
NOTE
Some menu items may not be displayed depending on theselected input source.
OPCBacklightContrastBrightnessColorTintSharpnessAdvanced
Color Temp.BlackI/P SettingFilm Mode3D-Y/CMonochromeRange of OPC
TrebleBassBalanceSurround
OPCBacklightContrastBrightnessColorTintSharpnessAdvanced
Color Temp.BlackI/P SettingFilm ModeMonochromeRange of OPC
No Signal OffNo Operation Off
No Signal OffNo Operation Off
EZ SetupCH SetupAntenna Setup-DIGITALInput SkipInput LabelParental CTRLPositionLanguageReset
Input SkipInput SignalAuto Sync.Input LabelFine Sync.PositionLanguageReset
Audio OnlyDigital Noise ReductionHDMI SetupOutput Select
Audio OnlyDigital Noise ReductionInput SelectOutput SelectColor SystemCaption SetupProgram Title DisplayFavorite CH
Audio Setup
2 – 4
LC-32/37D43U
LCD TVLC-32D43UService ManualLC-32D43U/LC-37D43UMarketE CHAPTER 3. DIMENSIONS
[1] DIMENSIONS
77/8 (200)
3111/32 (796)
39/32 (83) 353/64 (97)
1945/64 (500)
1945/64 (500)
937/64 (243)
131/2(343)
2059/64(531)
29/32(58)
323/64(85)
2313/64(589)
279/16 (700.0)
77/8(200)
1535/64(394.6)
Unit: inch/(mm)LC-32D43U
LC-37D43U
77/8 (200)
1135/64 (293)
45/8 (117)
3561/64 (913)
1427/32(377)
353/64 (97)
77/8(200)
323/64(85)
2135/64 (547)
3225/64 (822.6)
1817/64(463.8)
2337/64(599)
2527/32(656)
21/4(57)
2135/64 (547)
3 – 1
LC-32/37D43U
- M E M O -
3 – 2
LC-32/37D43U
PartsGuidePARTS GUIDE
CONTENTS
No. SX6Y9LC37D43U
LCD COLOR TELEVISION
MODELS
LC-32D43ULC-37D43U
[1] CABINET AND MECHANICAL PARTS (LC-32D43U)
[2] CABINET AND MECHANICAL PARTS (LC-37D43U)
[3] SUPPLIED ACCESSORIES
[4] PACKING PARTS (NOT REPLACEMENT ITEM)
[5] SERVICE JIGS (USE FOR SERVICING)
Parts marked with " " are important for maintaining the safety of the set. Be sure to replace theseparts with specified ones for maintaining the safety and performance of the set.
This document has been published to be usedfor after sales service only.The contents are subject to change without notice.
LC-32/37D43U
[1] CABINET AND MECHANICAL PARTS (LC-32D43U)
7
7-2
36
3 3-1
3-2
39
26
4
14
32
31
14
47
36
4136
41
36
49
48
41 47
50-2
50-1
50
36
41
36
1
1-1
1-8
1-5
1-11
1-6
1-7
1-11
1-6
1-7
1-11
2933
39
1-8 1-8
1-8
1-13
1-8 1-2
1-4
34
34
2-1
40
35 11 42
2
2-5 35
2-3
2-2
4634
36
46
34
36
5-2
34
5-1
1817
19
2320
36
37
1622
38
108
36
1536
6-1
6
36
2736
25
21
7
30 7-27-4
7-2
7-3
7-1
28
24
36
1-10
1-9
1-31-12 1-8
1-8
13
36
5
12
9
44
40
45
43
45
2-4
6-2
2
LC-32/37D43U
NO. PARTS CODE PRICE RANK
NEW MARK
PART DELIVERY
DESCRIPTION
[1] CABINET AND MECHANICAL PARTS (LC-32D43U)1 CCABAB612WJ03 N X Front Cabinet Ass'y
1-1 Not Available - N - Front Cabinet1-2 GCOVAB821WJSA X LED Cover1-3 GCOVAC146WJKA N X Front Cover1-4 Not Available - - Badge, SHARP1-5 HPNLSA100WJSA N X SP-Net1-6 PSPAHB081WJZZ N X Spacer, x21-7 PSPAHB082WJZZ N X Spacer, x21-8 PSPAZB115WJZZ X Spacer, x71-9 TLABZA635WJZZ AC J POP Label1-10 TLABZB392WJSA N X POP Label1-11 XJPSN30P08XS0 AA J Screw (for Front Cover), x31-12 HDECSA014WJSA N X Shine trim1-13 PSPAGA369WJZZ X Spacer2 CCABBA950WJ01 BL N X Rear Cabinet Ass'y
2-1 Not Available - N - Rear Cabinet2-2 HINDPC014WJSA N X Terminal Label2-3 LHLDWA057WJKZ AE J Wire Holder2-4 PSPAHB078WJZZ N X Spacer, x62-5 LHLDWA055WJKZ AC J Wire Holder3 CCOVAB929WJ01 AM N X Top Cover Ass'y
3-1 Not Available - S - Top Cover3-2 JBTN-A614WJKA X Operation Button4 R1LK315T3LF15 EC J 32" WIDE LCD Panel Module Unit5 CSLDMB061WJ01 AX N X MAIN Shield Ass'y
5-1 Not Available - S - MAIN Shield5-2 LHLDWA102WJKZ AB J Wire Holder, x36 CANGKA902WJ01 AN N X Jack Angle Ass'y
6-1 Not Available - N - Jack Angle6-2 HINDPC013WJSA N X Jack Indicator7 CCHSMA346WJ01 AZ N X Tray Chassis Ass'y
7-1 Not Available - N - Tray Chassis7-2 LHLDWA102WJKZ AB J Wire Holder, x37-3 LHLDWA120WJKZ AB J Wire Holder7-4 PZETKA209WJZZ S X Barrier Sheet8 GCOVAA678WJKA AE J SD Card Cover9 GCOVAB931WJKA AL N X Stand Area Cover10 HINDPB715WJSA AF X Terminal Label11 HINDPC239WJSA N X Model Label12 LANGKA913WJM1 BC N X Stand Fix Angle13 LANGKA914WJFW AL N X Stand Assist Angle14 LX-HZA003WJFN AC J Screw (for SP-BOX), x415 LX-NZ3047GEZZ AA J Nut16 NSFTZ0134CEFW AD J Shaft, x217 PCLICA004WJKZ AC J Rivet, x318 PRDARA414WJFW AK N X Heat Sink19 PSPAZA635WJKZ AC J Cool Sheet20 PSPAZA917WJKZ AH J Cool Sheet21 PSPAZB030WJKZ AB J Spacer22 QCNCWA496WJZZ AK X Connector (F-RCA)23 QCNW-E249WJPZ AH J Connecting Cord (ANT IN)24 QCNW-E257WJQZ AH J Connecting Cord (PE)25 QCNW-E258WJQZ AG J Connecting Cord (PD)26 QCNW-E266WJQZ AF J Connecting Cord (KM)27 QCNW-E278WJQZ AH J Connecting Cord (SH)28 QCNW-E703WJPZ AX X Connecting Cord (LV)29 QCNW-F250WJQZ AL N X Connecting Cord (RA)30 QCNW-F300WJQZ AL N X Connecting Cord (LA-LA-LB)31 QCNW-F316WJQZ AG N X Connecting Cord (SP)32 RSP-ZA215WJZZ AY N X Speaker (L)33 RSP-ZA216WJZZ AY N X Speaker (R)34 XBBS740P06000 AA J Screw (for ANG), x635 XBBS930P06000 AA J Screw (for CAB-B), x536 XBPS730P06WS0 AA J Screw (for PWB,ANG), x4137 XBPS830P06000 AA J Screw (for HDMI), x238 XEBS930P08000 AA J Screw (forJack)39 XEBS930P10000 AA J Screw (for LED), x2 (for SOUSA), x240 XEBS940P16000 AB J Screw (for CAB-B), x1041 XEBSN40P10000 AB J Screw (for PANEL), x442 Not Available - - No. Label43 CDAI-A332WJ01 N X Stand Base Ass'y44 GDAI-A333WJSA N X Stand Support45 LX-BZA176WJF9 N X Screw (forStand), x946 LANGTA414WJM1 AP N X Center Angle, x247 LANGHA052WJFW AG N X Rug Angle Top, x248 LANGHA051WJFW AG N X Center Angle Top49 LANGKA929WJFW AK N X Rug Angle Bottom L50 CANGKA930WJ01 N X Rug Angle Bottom R Ass'y
50-1 Not Available - N - Rug Angle Bottom R50-2 LHLDWA120WJKZ AB J Wire Holder
3
LC-32/37D43U
[2] CABINET AND MECHANICAL PARTS (LC-37D43U)
1
3 3-1
3-2
26
4
39
1-8
1-11
1-5 1-7
32
1-111-1
1-8
1-81-3
1-12
33
1-6
29
14
31
14
39
1-2
1-8
1-13
1-8
40
36
50-1
50
1-11
352-5
421135
2-446
34
34
2-12
49
18
3634
2-2
2-3
5-1
5-2
34
36
36
1536
2023
19
537
6-1 6-2
810
38
2216 9
40
34
13
36
12
366
36
43
45
45
4428
7-1
7-3
7-2
7-47-230
7
27
3625
24
21
36
17
1-4
1-9
1-10
1-7
4736
41
36
41
364836
49 4147
41
1-6
50-2
1-8
1-8
4
LC-32/37D43U
NO. PARTS CODE PRICE RANK
NEW MARK
PART DELIVERY
DESCRIPTION
[2] CABINET AND MECHANICAL PARTS (LC-37D43U)1 CCABAB633WJ03 N X Front Cabinet Ass'y
1-1 Not Available - N - Front Cabinet1-2 GCOVAB821WJSA X LED Cover1-3 GCOVAC147WJKA N X Front Cover1-4 Not Available - - Badge, SHARP1-5 HPNLSA101WJSA N X SP-Net1-6 PSPAHA416WJZZ AC J Spacer, x21-7 PSPAHA801WJZZ X Spacer, x21-8 PSPAZB074WJZZ X Spacer, x71-9 TLABZA635WJZZ AC J POP Label1-10 TLABZB392WJSA N X POP Label1-11 XJPSN30P08XS0 AA J Screw (for Front Cover), x31-12 HDECSA015WJSA N X Shine trim1-13 PSPAGA369WJZZ X Spacer2 CCABBA962WJ01 BQ N X Rear Cabinet Ass'y
2-1 Not Available - N - Rear Cabinet2-2 HINDPC014WJSA X Terminal Label2-3 LHLDWA057WJKZ AE J Wire Holder2-4 PSPAHB078WJZZ S X Spacer, x62-5 LHLDWA055WJKZ AC J Wire Holder3 CCOVAB929WJ01 AM S X Top Cover Ass'y
3-1 Not Available - S - Top Cover3-2 JBTN-A614WJKA X Operation Button4 R1LK370T3LZ5BW EZ J 37" WIDE LCD Panel Module Unit5 CSLDMB061WJ01 AX X MAIN Shield Ass'y
5-1 Not Available - S - MAIN Shield5-2 LHLDWA102WJKZ AB J Wire Holder, x36 CANGKA902WJ01 AN S X Jack Angle Ass'y
6-1 Not Available - N - Jack Angle6-2 HINDPC013WJSA N X Jack Indicator7 CCHSMA346WJ01 AZ X Tray Chassis Ass'y
7-1 Not Available - N - Tray Chassis7-2 LHLDWA102WJKZ AB J Wire Holder, x37-3 LHLDWA120WJKZ AB J Wire Holder7-4 PZETKA209WJZZ S X Barrier Sheet8 GCOVAA678WJKA AE J SD Card Cover9 GCOVAB931WJKA AL S X Stand Area Cover10 HINDPB715WJSA X Terminal Label11 HINDPC240WJSA N X Model Label12 LANGKA913WJM1 BC X Stand Fix Angle13 LANGKA914WJFW AL X Stand Assist Angle14 LX-HZA003WJFN AC J Screw (for SP-BOX), x415 LX-NZ3047GEZZ AA J Nut16 NSFTZ0134CEFW AD J Shaft, x217 PCLICA004WJKZ AC J Rivet, x318 PRDARA414WJFW AK S X Heat Sink19 PSPAZA635WJKZ AC J Cool Sheet20 PSPAZA917WJKZ AH J Cool Sheet21 PSPAZB030WJKZ AB J Spacer22 QCNCWA496WJZZ AK X Connector (F-RCA)23 QCNW-E249WJPZ AH J Connecting Cord (ANT IN)24 QCNW-E257WJQZ AH J Connecting Cord (PE)25 QCNW-E258WJQZ AG J Connecting Cord (PD)26 QCNW-E266WJQZ AF J Connecting Cord (KM)27 QCNW-E278WJQZ AH J Connecting Cord (SH)28 QCNW-E703WJPZ AX X Connecting Cord (LV)29 QCNW-F265WJQZ AM N X Connecting Cord (RA)30 QCNW-F271WJQZ AM N X Connecting Cord (LA-LA-LB)31 QCNW-F272WJQZ AH N X Connecting Cord (SP)32 RSP-ZA215WJZZ AY N X Speaker (L)33 RSP-ZA216WJZZ AY N X Speaker (R)34 XBBS740P06000 AA J Screw (for ANG), x635 XBPS930P08JS0 AB J Screw (for CAB-B), x536 XBPS730P06WS0 AA J Screw (for PWB,ANG), x4237 XBPS830P06000 AA J Screw (for HDMI), x238 XEBS930P08000 AA J Screw (for JACK)39 XEBS930P10000 AA J Screw (for LED), x2 (for SOUSA), x240 XEBS940P16000 AB J Screw (for CAB-B), x1041 XEBSN40P10000 AB J Screw (for PANEL), x442 Not Available - - No. Label43 CDAI-A337WJ01 N X Stand Base Ass'y44 GDAI-A333WJSA X Stand Support45 LX-BZA176WJF9 N X Screw (for Stand), x946 LANGTA417WJFW AP N X Center Angle, x247 LANGKA932WJFW AG N X Rug Angle Top LR, x248 LANGKA916WJFW AG N X Chassis Fix Angle Top49 LANGKA931WJFW AK N X Rug Angle Bottom LR50 CANGKA931WJ01 N X Rug Angle Bottom LR Ass'y
50-1 Not Available - N - Rug Angle Bottom LR50-2 LHLDWA120WJKZ AB J Wire Holder51 QCNW-F273WJQZ AG N X Connecting Cord (MODEL SETTING)
5
LC-32/37D43U
[3] SUPPLIED ACCESSORIES
NO. PARTS CODE PRICE RANK
NEW MARK
PART DELIVERY
DESCRIPTION
[3] SUPPLIED ACCESSORIESX1 LHLDWA083WJ00 AD J Cable BandX2 LHLDWA131WJKZ AE J Cable Clamp
! X3 QACCDA039WJPZ AQ J AC CordX4 RRMCGA535WJSA AY X Remote Control UnitX5 TINS-D004WJZZ N Operation ManualX6 Not Available - - "AAA" Size BatteryX7 TCADEA208WJZZ AD N X Enquete CardX8 TCAUZA263WJZZ N X Caution CardX9 CDAI-A332WJ02 BP N X Stand Unit [LC-32D43U]X9 CDAI-A337WJ02 BQ N X Stand Unit [LC-37D43U]
X9-1 UKOGLA001WJZZ AK X Tool for StandX9-2 UCLEZA001WJZZ AF X Cleaning ClothX10 TGAN-A768WJZZ Extend warranty
X1 X2 X3
X5 X6 X9
X9-1 X9-2
X4
6
LC-32/37D43U
[4] PACKING PARTS (NOT REPLACEMENT ITEM)
S7
S9
S7
S4S2
S3S5S6S10S11
S7
S7
S1
S12
S8
7
LC-32/37D43U
NO. PARTS CODE PRICE RANK
NEW MARK
PART DELIVERY
DESCRIPTION
[4] PACKING PARTS (NOT REPLACEMENT ITEM)S1 SPAKCD351WJZZ - N - Packing Case [LC-32D43U]S1 SPAKCD352WJZZ - N - Packing Case [LC-37D43U]S2 SPAKFB119WJZZ - N - Stand Case [LC-32D43U]S2 SPAKFB132WJZZ - N - Stand Case [LC-37D43U]S3 SPAKFB120WJZZ - N - Stand Pad [LC-32D43U]S3 SPAKFB133WJZZ - N - Stand Pad [LC-37D43U]S4 SPAKPA794WJZZ - N - Wrapping Paper (Monitor) [LC-32D43U]S4 SPAKPA795WJZZ - N - Wrapping Paper (Monitor) [LC-37D43U]S5 SPAKPA796WJZZ - N - Mirror Mat Base [LC-32D43U]S5 SPAKPA797WJZZ - N - Mirror Mat Base [LC-37D43U]S6 SPAKPA798WJZZ - N - Mirror Mat SupS7 SPAKXB306WJZZ - N - Packing Add. [LC-32D43U]S7 SPAKXB320WJZZ - N - Packing Add. [LC-37D43U]S8 SSAKA0101GJZZ - - Polyethylene BagS9 SSAKAA032WJZZ - - Polyethylene BagS10 SSAKHA020WJZZ - - Polyethylene Bag (for Screw)S11 SSAKHA033WJZZ - N - Polyethylene Bag (for Cloth)S12 TLABKA009WJZZ - - No. Label
[5] SERVICE JIGS (USE FOR SERVICING)N QCNW-D483WJQZ AX J Connecting Cord (PE (PA) 12pin 100cm)
MAIN to POWER UnitN QCNW-E068WJQZ AS J Connecting Cord (PD (MI) 6pin 100cm)
MAIN to POWER UnitN QCNW-F304WJQZ AV J Connecting Cord (LA/LB 4p-8p 130cm)
MAIN to INVERTER UnitConnecting Cord (LA 10p-14p 100cm)POWER to INVERTER Unit
N QCNW-E673WJPZ BP J Connecting Cord (LV 30pin 100cm)MAIN to LCD CONTROL Unit
N QCNW-E674WJQZ AS J Connecting Cord (SH 7pin 100cm)
8
LC-32/37D43U
- M E M O -
9
LC-32/37D43U
COPYRIGHT 2006 BY SHARP CORPORATION
ALL RIGHTS RESERVED.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted inany form or by any means, electronic, mechanical,photocopying, recording, or otherwise, withoutprior written permission of the publisher.
Dec. 2006 Printed in JapanTQ2092-S SY. KG
SHARP CORPORATIONAV Systems GroupCS PromotionCenterYaita,Tochigi 329-2193, Japan