2
Trailer Specification Manufacturer: Lawrence David Trailer Type: Single deck straight frame pillar-less curtainside tri-axle Dimensions Overall length: 13.710m Overall width: 2.550m Side access height: 2.584m Critical overall height: 4.162m Neck depth: 1.58m Roof depth: 1.70m Fifth wheel height: 12.5m Gross combination weight: 44T Suspension Spray suspension. Brakes Info centre fitted. Park/shunt valves - Chassis beam by the landing legs. Roll stability fitted. Page 1 of 2

Lawrence David Trailer Spec

Embed Size (px)

Citation preview

Page 1: Lawrence David Trailer Spec

Trailer SpecificationManufacturer: Lawrence David Trailer Type: Single deck straight frame pillar-less curtainside tri-axle

DimensionsOverall length: 13.710m Overall width: 2.550m Side access height: 2.584m Critical overall height: 4.162m Neck depth: 1.58mRoof depth: 1.70mFifth wheel height: 12.5mGross combination weight: 44T

SuspensionSpray suspension.

BrakesInfo centre fitted. Park/shunt valves - Chassis beam by the landing legs. Roll stability fitted.

Page 1 of 2

Page 2: Lawrence David Trailer Spec

CurtainsXL rated curtains fitted. Stainless steel locking curtain buckles.

Load Securing SystemTwin row galv steel load retention track fitted vertically and position 150mm from outer track.

Load Securing Type13 pairs of load retaining straps, top to suit load system, 50mm webbing, slide bar adjuster, plated buckle and flat combi rave hook. 13 pairs double D hanger and roller.

Miscellaneous Pullout ladder fitted. Additional options - Wings, flaps and under-run at ferry height. Coupling Box - Susie 3 sliding coupling. 2 pairs of ferry lashings fitted as standard.

Page 2 of 2