Larus Catalog EN

www.larus.pt | +351 234 520 600 09 2014

Larus is a Portuguese company that develops and produces urban furniture since 1988.Continuous investigation | design is the main reason to our growth.

“Humanize the Territory”

4km

A1 Lisboa

A25Aveiro

LARUS40º40’20 N8º28’25 O

EN1 | IC2Porto

A25Viseu

EN1| IC2Coimbra

Exit 16Viseu Albergaria-a-Velha

A1Porto

industrialarea

Viseu Albergaria

Aveiro

Toll

We are planning to extend our facilities, giving greater importance to management and social department, as well as the project team considering that product development contributes to strengthen our position on the market. It is also planned to build a design museum, an auditorium, a show-room and an area for temporary thematic exhibitions.

Larus Design Urbanocompany info

www.larus.pt | +351 234 520 600

Larus’ sustained growth is justified by its product develop-ment policy.The R&D Department includes designers, engineers and other technical experts, being a bridge between Larus’ tech-nical assets and external authors. Effort is part of everyday learning and fits into the company’s Design Management, foreseeing consolidated evolution.

We favor a permanent connection with architecture and design offices and the technical authorities.

Larus has been using a wide range of construction proces-ses: fibreglass, roto-molded plastic, metal casting, concrete conforming and others such as metalworking or carpentry thus preserving the design of industrial constraints, adopting them according to efficiency, cost control and creativity of the final solution.

R&D | Production

‘91 - National Design Award

‘93 - Design Stamps, Product Awards

‘94 - Nomination for European Design Award

‘98/99 - National Design Award (Design Global Management)

‘98/99 - National Product Design Award (Expo’98 Signalling System)

‘07 - Hall of fame (ICSID Design edition)

‘07 - Honourable Mention at the DME Award, Design Management European Award

‘08 - Red Dot Design, Award Product Design 2008, lighting and illumination category

‘09 - Sena da Silva National Design Award, winner in the company category

‘09 - Sena da Silva National Design Award, winner in the product category - Rua Series

‘10 - Bid 2010 (Ibero-american Biennal) tom paper bin, vesúvi bollard

‘10 - DME Award, European Design Management Award

‘11 - Red Dot Design Award, Honourable mention, tom paper bin

‘11 - Red Dot Design Award, Winner, + line

‘11 - Face to Face, Best Conference Award

‘12 - Nomination for German Design Award 2013

‘12 - Honourable Mention in Bid 2012 (Ibero-american Biennal)

‘14 - Red Dot Design Award with Sheet paper bin

Larus Award, In cooperation with About Green (publisher of the magazine Arquitecturas and organizer of the exhibition Urba Verde), Larus is promoting the yearly Urban Equipment Iberian Award, since 2011.

Larus Award

Awards

IPVC

FBAUL

IPCBUniversidade Lusíada

The collaboration with universities, amongst others the supervision of the Master in Design, enables Larus a continuous reflection on its own practice, along with a renewed social and aesthetic vision of consumers, commonly referred to as consumer trends. The Portuguese Design Centre recognizes Larus as an exemplar company in the design management and confirms it as the most prestigious portuguese brand in urban equipment design.

Partnerships

Larus Design UrbanoFacilities

The present building includes the manufacturing facility and all the services related to it: management, design, sales department, manufacturing department, etc.

We are planning to extend our facilities, giving greater importance to management and social department, as well as the project team. Thus, considering that innovation is the key factor in our development, it contributes to strengthenour position on the market. Larus is also planning to build a design museum, an auditorium with educational purposes, a showroom, an area for temporary thematic exhibitions, and so on.Projected by Jorge Trindade.

The company culture is a set of values and principles, which inspire and influence the collaborators and employees in their day-to-day habits and practices. Frequently, they stem from the values set by our founder, although, when the employees - its main asset – get deep into the company, they encourage new procedures to improve its operations and results, inspiring a philosophy that sets it apart from its rivals, creating sustainable competitive advantages. It is a dynamic, evolutionary, participating process, which proactively develops autonomy and responsibility in its members, as an immediate result of being a company dedicated to investigation and development.

Larus’ philosophy is displayed in the image of the company, in the logo and its use on the uniforms, in the indoor and outdoor decoration, in the language, in the calm and informal relationship between employees and with the clients, in the concern about meeting our customers’ needs, and, in an original way, in the relationship with external authors who were invited to plant the tree curtain that surrounds the facilities, thus encouraging loyalty to the company. This reflects the whole responsibility that guides Larus philosophy: beyond all the management skills, a solid sense of understanding and human comprehension, is permanently demanded.

The seagull, included in the logo, is characteristic of the Aveiro region,and is in the origin of thecompany’s name.

Larus means seagull in Latin and reflects amessage of freedom (creative ability), balance(between the company’s goals, customerand employee satisfaction and sustainabledevelopment) and environmental awareness(ecological concerns, material rationalisationand productive processes, framing of its facilitieswithin the landscape and productsuitability to the open spaces they areaimed at).

CULTURE PHILOSOPHY AND VALUES LOGO

A1

A3

A5

A7

A9

A11

A13

A15

A17

A19

A21

A23

A25

A37

A39

A41

A43

A45

A47

A49

A51

A27

A29

A31

A33

A35

A63

A65

A67

A69

A71

A73

A75

A77

A53

A55

A57

A59

A61

B1

B3

B5

A79

B7

FURNITURE

IP6 bench

Serralves line

Degrau bench

Rua line

Axis line

Daciano da Costa line

Sueste line

Cais line

Balarés line

Mateo line

Tango line

Lótus line

Arc line

Arqui line

Urbus paper bin

Tom paper bin

Sac paper bin

Urbus drinking fountain

Linea drinking fountain

Parque line

LIGHTING

17º lighting pole

Solar pole

+ line

Comendador line

Alta bench

Matriz bench

Waste Separation Bins

Beburb drinking Fountain

Ufo line

Embondeiro line

Elegance bench

Filipe Alarcãobench

Inca bench

Promontório line

Point paper bin

Sheet paper bin

Bussaco line

Miguel Arruda line

Axis bold line

Interior Line

Alta lighting pole

Sloop paper bin

Ária bench

Gemini pole

C11

C13

C15

C17

C1

C3

C5

C7

C9

D11

D1

D3

D5

D7

D9

D13

E1

E3

E5

F1

E7

F3

F5

F7

F9

SIGNAGE SHELTERS

Larus Pole

Quadris | Rondo Line

Mupis

Arqui

Daciano da Costa

Pórtico

ACESSORIES

Grates

Fradinhos

Bollards

Vesúvio bollards

skips | dumpstersfor canine dejections

Parking

Shade structures

Sombra pergola

Burb bollards

Check-Up Track

Mondrian

Arqui

Jardim

Beach support

Watchtower

Kiosques Terrasses

KIOSKS

Mini Totem

Ardina Stand

Polis

www.larus.pt | +351 234 520 600A 1

“A sense of collection between different pieces, through a constructive concept: a common structural element evocative of a precise conceptual universe, that sup-ports each functional performance. Neutral, humble and discreet, with objects that do not contaminate space, to the extent that public space is not built on furniture, which must be contained and have the capacity to not erase all else surrounding it.”João Nunes

+ linedesign João Nunes

Furniture

A 2

200

3000 1200

800

700

120 80

560

2000

1000

420

300 920

1200

450 600

1200|1500

1200|1500

5020

36001010

400820

800

200

300 300

100

980

500

800

720

80

Stainless steel

Steel

Liquid painting

BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays. Rods to support wood sleds in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Paper bin Support: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1). Bucket: in steel S275JR (LR A1) metalized and painted. Standard version in forge enamel (LR EF1).Inner ring to fix the plastic bag: stainless steel AISI 304 (LR AX1).Anchorage: anchored directly to foundation (LR F3).

Drinking FountainBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Tube and handgrip: stainless steel AISI 304 (LR AX1).Anchorage: anchored directly to foundation.The foundation can be a solid base or a prefabricated base to receive the water (LR F3).

BollardBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: anchored directly to foundation (LR F3).

Tree GrateBody: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Anchorage: anchored directly to foundation (LR F3).

Foundations to be executed by the client according to the technical information available upon request.

Varnish

Cast iron

Wood

Other colors may be delivered on request

Metallization

Institutional Signage

paper bin drinking fountain bollard fixed _ retractable _ rebuttable

bench

Urban Signage

benchParking

Guide rail for pedestrian walkways Tree Grates

detail

www.larus.pt | +351 234 520 600A 3Furniture

The bench “Elegance” is supposed to refresh timeless lines of street furniture with a contemporary and elegant approach. The very robust structure, clean design and its superior comfort makes this product family a universal solution for the highest demands.

Elegance benchdesign Pedro Martins Pereira

A 4

30001500600630

806

427

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Foundations to be carried out by the client according to technical information made available

Metallization

Varnish

Liquid painting

Wood

Cast iron


Line made of cork and concrete, wherein the raw material plays a major role.Cork, being mixed with concrete as an integral material, transmits feeling of comfort, reducing the coldness oftenly associated with concrete.

Miguel Arruda linedesign Miguel Arruda

A 6

565600

425460

Ø300 Ø300

BenchConcrete & cork;

Fixing: anchored directly to the pavement.


460 bench - A option 460 bench - B option 600 bench - A option 600 bench - B option

Concrete & cork mix


Line composed of indoor banks and table that may be adapted to the outside. The differentiation of this equipment is the contrast between the conventional solution of seats and table in wood and the use of feet with contemporary design.

Contraste linedesign Larus | Francisco Providência

A 8

3000 850

600

3000

440

Table

Table & benches

Steel

Liquid painting

Varnish

Wood

Metallization

TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Top: Beech wood, treated by immersion, with pervasive all’acqua varnish.

BenchS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Seat: Beech wood, treated by immersion, with pervasive all’acqua varnish.


Bussaco’s Forest Foundation challenged Larus to develop a furniture line to reuse damaged species struck by a storm, with nefarious effects on natural and built heritage, in order to perpetuate their life cycle. The acquisition of elements from this furniture line contributes to the reforestation and preservation of the Bussaco National Forest, the only Portuguese forest with PEFC.

Simple and minimal lines underline rurality. As the solid wood is used natural without any varnish, the time passage effect emphasizes its identity, without diminishing its elegance and durability.

The combination with metal adds a classy touch to this rustic line, while increasing its physical consistency and minimizing the need of future maintenance.

Bussaco Linedesign Pedro Martins Pereira

A 10

430

2000 590

830 760

735

450

600

1200

950

Ø315

570 1900

1200

745440

770

700

7501000

1580

695

1440900

1000400

2000

950 700

1750940

1700 655

820

820

Steel

Liquid painting

Varnish

Solid wood

Metallization

Corten steel


Cast iron

Benches set - “Couch” and TableBench

Paper bins Bicycle rack

Four people table and benches set Barbeque

Signage and reading table

Drinking Fountain

BenchStructure: Steel plate S275JR (LR A1), blasted, metalized and painted.Solid wood (cupressus lusitanica / sequoia sempervirens).Anchorage: anchored directly to the pavement (LR F3).

Benches set - “Couch” and tableStructure: Steel plate S275JR (LR A1), blasted, metalized and painted.Solid wood (cupressus lusitanica / sequoia sempervirens).Anchorage: anchored directly to the pavement (LR F3).

Paper Bin Solid wood Bucket & lid: Steel plate S275JR (LR A1), blasted, metalized and painted.Capacity: 35 Lts (optional lid) & 120Lts (with lid).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).120L paper bin with lid: removable bucket. Reference-coloured waste separation steel plate available.

BarbequeStructure: Corten steel Top: solid woodBarbeque and protection top plates: corten steelAnchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).


Made out of one single material, steel, this bench is a very neutral element fitted for almost every kind of public environments. Filipe Alarcão, wanted to create a very simple, conceptually speaking, and easy to produce piece, capable to discretely merge into our overload urban places.The IP bench’s shape evokes an extruded tube from which its large part of the bottom was removed maintaining its formal integrity on both tops.The two feet on both extremities are welded together to a single horizontal element conformed to work as a structural beam. The solution allows to achieve a very slim and light shape and yet a very resistant one, with long unsupported arches.

It is produced in to sizes with slight proportion differences, one for outdoors and a smaller one for indoor public spaces. There are two kinds of surface finishing available, a lacquered coating for indoor and a neutral varnishing overlay on the metalized grey body for outdoors which emphasizes its street furniture character.

Filipe Alarcão benchdesign Filipe Alarcão

A 12

2400

450 430

1800

550 450

RAL 9003

RAL 7024

RAL 7040

RAL 3009

RAL 5015

2400

2150

1800

1800

1800

430637

681560

Outdoor bench S275JR (LR A1) steel plate, metallized, painted and neutral varnishing.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Indoor benchS275JR (LR A1) steel plate, metallized and lacquered coating.

Indoor benchOutdoor bench

RAL colors availableAll RAL references below are made by approximation, so slight variations may occur.

Other colors may be delivered on request.

Steel

Liquid painting

Varnish


Metallization

www.larus.pt | +351 234 520 600A 13

IP6 benchdesign Jesús Irisarri | Piñera

“The design comes from territories outside the concept of furniture. The idea is to de-sign a mechanism that generates a meeting space, a central point to be in group. Rather than proposing a particular use, it opens up a range of possible uses, different ways of being, bound and generated from the rela-tionships established between users. Thus, the way to sit, rest or lie down will depend on the number and disposal of the group of people that converge to the equipment.”Jesús Irisarri

Furniture

A 14

2580

1940

730

RAL 5003

RAL 5017

RAL 6029

RAL 6024

RAL 1021

RAL 1016

RAL 3000

RAL 7013

RAL 9001

RAL 9004

Water drainage for outdoor benches

upper side of the bench

stainless steel part

stainless steel tubewater drainage Ø16x1,5mm

lower side of the bench

BenchRotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1).Possibility to drain rain water with an accessory in stainless steel AISI 304 (LR AX1)Inner Lighting: (optional)White Bench: luminaire IP65 equipped with fluorescent lamp 18W T8 type.Other colors: luminaire IP65 equipped with fluorescent lamps 2x18W T8 type.Weight: 90 kg.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).Foundations to be executed by the client according to the technical information available upon request.



Grinded stainless steel

Lighting

Rotomolded plastic

www.larus.pt | +351 234 520 600A 15

Serralves linedesign Álvaro Siza

“The classic urban furniture from the eighteen hundreds serves as a base to the ergonomic and maintenance study.”Álvaro Siza

Furniture

A 16

505

950

410

80

150

1400 | 1800

770

416

815

1800

1800

1494

opening system

optional ashtray

Paper bin

BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Standard version in forge enamel (LR EF1).Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays, or enameled. Standard version in RAL 7042 (LR RA5).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Paper Bin 70LSteel bars S275JR (LR A1), metalized and painted. Standard version in forge enamel (LR EF1).Inner bucket: black rotomolded plastic in polyethylene resin DOWLEX NG 2432.10NE (LR R1).Access door with a triangular key lock.Ashtray (optional): tilting in stainless steel AISI 304 (LR AX1). Anchorage: anchor previously fixed to the foundation (LR F2).

Foundations to be executed by the client according to the technical information available upon request.Grinded stainless

steel

Steel

Liquid painting

Rotomolded plastic

Cast iron

Varnish

Wood

Metallization


Bench with backrest

Bench with backrest doble

www.larus.pt | +351 234 520 600A 17

“Streets, squares and public gardens should be a big living room, comfortably furnished. The urban furniture should be stable, firm, oriented, resistant to vandalism, reparable and adaptable to its users. Preferably, it should not retain rain water, being able to dry fast. In addition, it should not have a superfluous exposure in order to respect the surrounding. A simple design could be the correct answer, with a neat and vigorous design suscep-tible of further adaptations, using different acces¬sories, to other situations without ever losing its identity.”J. M. Carvalho Araújo

Rua linedesign J.M.Carvalho Araújo

Furniture

A 18

420

420

1800

420

105

900

420

420

Single simple bench

Triple simple bench

Bicycle rack

Option: curved

Option: curved

Option: drilled

Paper bin

Steel

Metallization

BenchSteel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Paper Bin Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Capacity: 30 Lts.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Bicycle Racks Steel plate S275JR (LR A1) bent with a radius of 50mm, metalized.Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).


www.larus.pt | +351 234 520 600A 19

The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:1997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.

Axis linedesign Pedro Martins Pereira | Larus

Furniture

A 20

700

500 | 1800 | 2500 | 3000

445

680

1800

710

700

500|1000

528

445

1800 | 2500 | 3000 500 652 1385

445

120

1165

575

1800

830

200445

940

600

830

652

300

Bench without backrest

Chair

Table

Bench with backrest | doble

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

TableBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper Bin Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 11L.Fixings: fixed directly to the ground by lead solder (LR F3).


Paper Bin

Bench with backrest wall Mounting

Long Bench

Liquid painting

Cast iron

Varnish

Wood

Metallization

www.larus.pt | +351 234 520 600A 21

The Axis bench was developed with an ergonomic seating line. Its seating surface is of Tali, wood of high density. It is protected with a non toxic varnish and attached to a support leg which is fixed to the ground and made of Euronorm cast iron 1561:19997, metallized and painted. The resistant axial leg allows us to obtain a simple design, of easy integration in historical or contemporary, urban or rural environments. The other elements of this line follow the same principle of depurated forms.

Axis linedesign Pedro Martins Pereira | Larus

Furniture

A 22

762445

1490

608

667

1490

500|1800|2500|3000 1800|2500|3000

500|1800|2500|3000

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).


Liquid painting

Cast iron

Varnish

Wood

Metalized

Bench with backrest Bench with backrest | doble


www.larus.pt | +351 234 520 600A 23

Using elements that recur in the shapes of the pieces, that for decades made Alba Fac-tories a recognized name, Daciano da Costa designed this urban furniture line, named after the founder of this company, Augus-to Martins Pereira, one of the anonymous artists who designed the cultural identity with which we identify ourselves. Benches, public lighting, fire hydrants and pieces that he de-signed for his home, such as banisters, lamp holders, doors and trims, repeating vertical and horizontal lines, were the references for the “Comendador Line”.

Comendador linedesign Daciano da Costa

Furniture

A 24

1000

330

3300

1800

700

Ø400

805

605

200

520

520200

signage

bench with backrest

drinking fountain

BenchLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Drinking fountainBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Spout and timer: chrome plated brass. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

SignageTop and base (post): BS EN 1561:1997 cast iron, (LRFF1), stripped, metallized and painted. Standard version in forge enamel (LR EF1).Post: anodized aluminium, profile C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3).Plates: OL.838059.1 (AP1 LR) aluminium, RAL 3004 (LR RA1) lacquered.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Foundations to be carried out by the client according to technical information made available.

Metallization

Liquid painting

Varnish

Aluminium

Anodized aluminium

Cast iron

Wood


www.larus.pt | +351 234 520 600A 25

Urban furniture project which takes the graphical matrix as a geometrical rule, thus enabling it to be adaptable to the design of the floor where the equipment is being installed.

Matriz benchdesign Daciano da Costa

Furniture

A 26

1500

85

95

610

35

695

10Ø32

90

355 425

BenchLegs: S275JR (LR A1) steel tube and bar, metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


Steel

Liquid painting

Varnish

Wood

Metallization


www.larus.pt | +351 234 520 600A 27

“The exaggeration, the modular clarity and the predominance of a volumetric and orthogonal expression, was designed as a counterpoint to the elegance of the delicate curved shapes, giving the piece an undenia-ble contemporaneity.”Daciano da Costa

Alta benchdesign Daciano da Costa

Furniture

A 28

70

90 1420

90

720

1600 485

430

BenchLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1). Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).


Steel

Liquid painting

Cast iron

Varnish

Wood

Metalized


www.larus.pt | +351 234 520 600A 29

“Family of objects with a basis of reference: the whitewashed wall, which can be seen as an “extension” to the urban and rural landscape. A reflection of the artistic quality of vernacular architecture, converging the needs of use and enjoyment.”Daciano da Costa

Sueste linedesign Daciano da Costa

Furniture

A 30

1800

420

600

1800 | 1200 | 600

770 450

600

470

600

850

700380

900

254

1095

1011

1800

440


Bench with backrest

Planter Drinking FountainFountain

Bench with backrest - concreteBetão C30/37 XC4 (LR B1) de cimento branco.

Bench without backrest - concreteBetão C30/37 XC4 (LR B1) de cimento branco.

Bench without backrest - concrete and woodWhite C30/37 XC4 (LR B1) cement concrete Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection. Mortise: S275JR (LR A1) steel bar, stripped, metallized and painted.

Drinking fountainBody: white C30/37 XC4 (LR B1) cement concrete.Spout: triggered by a delayed tap in chrome plated brass. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).

Fountain Body: white C30/37 XC4 (LR B1) cement concrete.Source: Painted galvanized steel.

Planter (Option A)In white C30/37 XC4 (LR B1) cement concrete.Vase: S 355 J2 G2W (LR AC1) Corten steel-A. Planter (Option B)Vase: S 355 J2 G2W (LR AC1) Corten steel-A


Bench without backrest with wood

Steel

Concrete

Liquid painting

Corten steel

Lighting

Varnish

Wood

Metallized

www.larus.pt | +351 234 520 600A 31

References were the historical components, of an austere design, of the city and work of Jorge Vieira (1926-1998), “a sculptor of popular Mediterranean expression, figurative-abstractionist, who violently deconstructed the human figure”, to quote the words of Prof. Daciano, who has named this a “design of citation”, because of the recurrence of materials and technical solutions used by his friend: the corten steel and the pieces supported by T-shapes, thus suggesting the three support points.

Daciano da Costa linedesign Daciano da Costa

Furniture

A 32

1820

470

570

3630

770

470

570

1820

770

570

465

1500 460

462

800

313

Bench with backrest BN1

Double bench BN1+BN2

Bench without backrest BN5Paper bin PL2

Bench without backrest BN2

BN1S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

BN2S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

BN5S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood (cleaver), treated by immersion, with pervasive all’aqua 420 (LR I1) for better absoption of the all’aqua 120 (LR V1) varnish with butyl diglicol Xi R36, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper Bin PL2S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Capacidad: 62 Lts.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


S 355 J2 G2W (LR AC1) corten steel and Tabebuia [aka Ipê or Trumpet Tree] wood solution is only being used in the city of Beja.

Steel

Liquid painting

Corten steel

Varnish

Wood

Metalized


www.larus.pt | +351 234 520 600A 33

“When the open space is public, built ele-ments and materials must be durable, robust and if possible beautiful. They’re expected to be used by people of all ages, from many cultures and with different habits. They must resist rain, heat, wind and time. They should remain in the publics´ emotional memory as beautiful and comfortable objects. Designing urban equipment is a challenge, like a puzzle that is built in slow-motion, throughout life.”Cristina Castel-Branco

Inca benchdesign Cristina Castel-Branco

Furniture

A 34

3390

360

860

3390

360

760

360

860

5640

6790

1140

2460

960

BancoMódulo: Betão C30/37 XC4 (LR B1) pintado. Assento: madeira Tali, tratadas com verniz aquoso, acrílico, microporoso máx. 20g/l COV com absorventes raios U.V’s (LR V1) ou Betão C30/37 XC4 (LR B1) pintado.

Simple bench with backrest

Simple bench without backrest

Double bench with backrest

Triple bench with backrest

Articulated Inca becnh

Module for Inca bench construction

Concrete

Liquid painting

Varnish

Metallization


www.larus.pt | +351 234 520 600A 35

Benches which easily adapt to uneven grounds, allowing younger users to have a fun time.

Degrau bench design Inês Lobo

Furniture

A 36

750

LT

1500

500

250

1500

BenchWhite C30/37 XC4 (LR B1) cement concrete.

Concrete

www.larus.pt | +351 234 520 600A 37

When thinking of the pier [Cais], one is reminded of sheltered vessels, of forgotten, entwined or stressed cables moored to cast iron bollards, that resist the corrosion of the maritime environment with a enduring stubbornness.

The Cais Line takes inspiration from these elements; in the enjoyment of seaside pro-menades.

Cais linedesign Pedro Martins Pereira

Furniture

A 38

320

850

320

850

335

905

460

400

590

445

425

526

420 420

400 445

300 300445

900

Ø140 Ø240

240

Ø240

500

200

500

Ø120

284

865

280

284

DC90 DC50A_RDC50 DC24 DC50A

DC50_R

Drinking fountain

Paper binBench without backrestBench with backrest

Bench with backrestBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).

Bench without backrestBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Drinking FountainBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

BollardsBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Paper binBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Container: AISI 316 (LR AX2) steel plateTriangular lock in AISI 316 (LR AX2) stainless steelCapacity: 42 Lts Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


bollard

Cast iron

Liquid painting

Steel

Metalized


www.larus.pt | +351 234 520 600A 39

Furniture line with bench, table and barbecue in reinforced concrete (HA-30-B-12-lla) and steel.

Balarés linedesign Vier Arquitectos

Furniture

A 40

1800 | 2400

440

550

2401560 600 550

740440

2401560 600

770 475

570300

1000760

2401560 600

770440

2401560 600

770475

2401560 600

475

1400120

800

9001150

700

600120

2400 750

750


Bench with metal backrest

Paper bin Perforation options available

Table and benches setTable

Barbecue

Boollard

Concrete

Galvanized

Steel

Corten steel

Bench without backrestC30/37 XC4 (LR B1) Concrete.

Bench with metal backrestC30/37 XC4 (LR B1) Concrete.Back: galvanized S275JR (LR A1) steel plate.

Bench with wood backrest and wood seatC30/37 XC4 (LR B1) Concrete.Backrest and seat: Steel plate structure S275JR (LR A1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.

Bench without backrest with wood seatC30/37 XC4 (LR B1) Concrete.Seat: Steel plate structure S275JR (LR A1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.

Paper bin 100LBody: galvanized S275JR (LR A1) steel plate. Option: perforated.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

BollardC30/37 XC4 (LR B1) Concrete. TableC30/37 XC4 (LR B1) Concrete.

BarbecueSupport: C30/37 XC4 (LR B1) concrete.Body: galvanized S275JR (LR A1) steel plate.


Bench with wood backrest and wood seat Bench without backrest with wood seat

Bench with wood backrest and partial wood seat Bench with wood backrest

www.larus.pt | +351 234 520 600A 41

Line with movable seating, allowing for grou-ping of the equipment in accordance with the desires of its users, which is in line with the transformation and modernization of the urban space.Equipment that allows for a new playful use whilst at the same time having a simplicity that respects the environment.

Mateo Linedesign Josep Lluís Mateo

Furniture

A 42

900

610

2160

900

350

500750

Fixed | movable chair

Sliding Rail

bench with backrest Paper bin 45 L

Movable chairStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment, with a double carriage rolling system, allowing for movement of the seat along the rail.

Fixed chairStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back feet with cast stainless steel (LR IF1) attachment. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Miradouro benchStructure: circular tubular profile in AISI 316 (LR AX2) stainless steel.Back and seat: AISI 316 (LR AX2) single steel plate, brushed on the upper side and perforated with loosely spaced circular holes.Legs: front feet with circular base in hard black plastic; back legs with cast stainless steel (LR AF1) attachment.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper binBin bucket: made of AISI 316 (LR AX2) stainless steel plate, brushed on the upper side, perforated with loosely spaced circular holes, with a non perforated band around the top and bottom perimeter of the bin. Bottom of the bin formed by a AISI 316 (LR AX2) stainless steel plate Foot: AISI 316 (LR AX2) steel tube and bar, with a brushed finish. Base: made of AISI 316 (LR AX2) stainless steel plate, with a brushed finish.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Sliding RailIn S752JR (LR A1) stainless steel plate, stripped, metallized and painted.


Stainless steel

Steel

www.larus.pt | +351 234 520 600A 43

The configuration of a woman’s back, when held by her partner’s arm, was the idea that went into the design of the Tango bench - this idea being pursued throughout the other elements of this line.

Tango linedesign Pedro Martins Pereira | Larus

Furniture

A 44

435

600

444

515

882

300

478780

340

280

480

1350

1800 | 2600

760

735

900

900

1800 | 2600

2600

435

700

380

586

380596770

1800 | 2600

Bench with backrest

Table

Chair without | with backrest

Paper bin

door

container

Bench with backrestS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper bin S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Capacity: 38 LtsFixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Chair without backrest | with backrestS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Bench with backrest with armrest

Bench without backrest - 4 wood sleds Bench without backrest - 6 wood sleds

Steel

Liquid painting

Varnish

Wood

Metalized



The concept is inspired by the early nineteenth century street furniture and in the first attempts of standardization.

We associate this period to a great generosity in the size and robustness of the parts, in addition to a concern with comfort. It is also associated with a certain idea of “romance” of the lamp and the bench, which was later recovered by the “operative nostalgia” of architects like Lewerentz, Perret, Portaluppi, Pouillon or Tessenow.

With the concern to answer to situations in which the relations of history strongly mark the place, Promontory Line subtly seeks to stylize this association between the form-type and its imaginary place.

Promontório furniture linedesign Promontório

A 46

1800

772

930

420600

400

3450

3000

450

250

1115

variável

3540

BenchFeet: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Seating: Tali wood, treated with wood filler all’acqua 420 (LR I1), by immersion, to improve the adhesion of the varnish 120 all’acqua (LR V1) with butil diglicol Xi R36, and to protect against U.V. rays, or enameled. Standard version in RAL 7042 (LR RA5).Anchorage: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).

Lighting poleTube: Cast Iron, Euronorm 1561:1997 (LR FF1), blasted, metalized and painted. Light bulb: frosted glassIRC > 80.Impact resistance: IK08.Resistance to liquids and dust intrusion: IP55 Light bulb: 100W metal iodidesTemperature: 2800K. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F3).


Liquid painting

Cast iron

Metallization

Varnish

Wood


Lighting

Electrical installation

www.larus.pt | +351 234 520 600A 47

Minimalistic conception which is supported by two-dimensional shapes, reinforcing a robust presence.Its formal simplicity facilitates integration into a diversity of environments.

Lótus linedesign ImaginarQ

Furniture

A 48

820

1000

590

290

550

2100600

475

12682000 | 600

910

840

450

600 | 2000

2000

1800

510 450

450

1000

940

745

Double bench with backrest Bench with backrest Planter

Bench without backrest Paper bin

Bicycle rack

Table


Bench with backrest | doubleS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper bin Body: S275JR sheet steel (LR A1), stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Inner ring: S275JR (LR A1) steel bar, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Bicycle rackS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

PlanterS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglycol, for UV protection.


Steel

Metallization

Varnish

Liquid painting


Wood

www.larus.pt | +351 234 520 600A 49

Formal simplicity that does not hide the con-trast between its support legs, giving a more intense presence, a subtle seat which results in an easily integrated piece of equipment.

Arc linedesign Pedro Martins Pereira | Larus

Furniture

A 50

1720

450

460

2120

655

760

Bench Table

BenchS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2)

TableS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Mortise: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Steel

Metallization

Varnish

Wood


www.larus.pt | +351 234 520 600A 51

A line for modern architectural solutions, with a predominance of high-quality dense mate-rials, which do not peel off the ground.

Arqui linedesign Jorge Trindade | Larus

Furniture

A 52

1900

500

4001100400 500

400

354

734

90

70

20

354478

796

A


ashtray

Paper bin Concrete paper bin

detail A

Bench without backrestGranite (LR G1) with BS EN 1561:1997 (LR FF1) cast iron seat, stripped, metallized and painted. Standard version in forge enamel (LR EF1).

Paper bin 35LBody: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper Bin (concrete)Body: C30/37 XC4 (LR B1) Concrete.Door: BS EN 1561:1997 (LR FF1) cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Concrete

Cast iron

Granite

Metallization

Steel


Rotomolded plastic


The litter bin “Sheet” evokes the concept of a folded paper sheet, materialized by the bended edges of the front and rear metal plates.

It’s a lighter approach to waste and its simplicity intends to assure functionality.It expects to create a symbolic and emotional empathy against the disrelish people usually have towards waste containers.The garbage collection is done through an interior plastic bag fixed on an inner steel frame and is accessible through the door with rotational opening.With a capacity of 55L it is produced of metallised and painted steel plate.The installation is done by threaded bolts directly to the ground which enables an easy removal, if necessary.

Sheet paper bindesign Pedro Martins Pereira & Mário Oliveira

A 54

345525

840

1000

630 300408

Body: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in RAL 9016.Door: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in RAL 7035. Revolving door with safety lock. Waste collection made through plastic bag applied to metal rim inside.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Metallization

Steel


Capacity: 55L Capacity: 100L


Sloop paper bindesign Larus

Recycle bin equipment, especially developed for easy access to inner containers (plastic bags). By operating the lock, the exterior body, cover included, goes up using gas spring, fully freeing access to containers. For the set’s closure, the body is pressed downwards and locked. There’s an easy identification for each type of waste, made by an inscription and reference color associated.Steel, stripped, metallized and painted.Capacity: 80+80L

A 56

Ø580

1185

Liquid painting

Metallization

Steel Fixed structure: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in forge enamel (LR EF1).Movable structure: Stripped, metallized and painted steel plate S275JR (LR A1). Standard version in forge enamel (LR EF1). AISI 304 (LR AX1) steel plate. Waste collection made through plastic bag applied to metal rim inside.Fixing: with threaded rods in stainless steel AISI 304 (LR AX1), anchored directly to the pavement / foundation with chemical plugs (LR F1).


www.larus.pt | +351 234 520 600A 57

An object which makes a statement with its formal and functional simplicity. Both sturdy and light.

Urbus paper bindesign Pedro Martins Pereira | Larus

Furniture

A 58

Ø370

660

90

855

Ø490

80 L 35 L

Paper binBS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 32L | 80LFixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Stainless steel

Cast iron

Metallization


Rotomolded plastic

www.larus.pt | +351 234 520 600A 59

Lightness accentuated by the stem-like support attaching it to the ground, giving the idea of levitation.

Small, fun Paper bin.

Tom paper bindesign Pedro Martins Pereira | Larus

Furniture

A 60

500

85

300

300

Ø350

Ø200

RAL 5003

RAL 5017

RAL 6029

RAL 6024

RAL 1021

RAL 1016

RAL 3000

RAL 7013

RAL 9001

RAL 9004

Tom paper bin

Body: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Container: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1). Support: S275JR (LR A1) steel tube, metallized and painted. Standard version in RAL 7016 (LA RA6).Lock: triangular key in AISI 316 (LR AX1) stainless steel. Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.



Compact soil (urban)Concrete foundationCapacity: 32 L

Liquid painting

Metallization

Steel


Rotomolded plastic

www.larus.pt | +351 234 520 600A 61

Lightness accentuated by the stem-like support attaching it to the ground, giving the idea of levitation.

Clean, neutral language, appropriate to diverse typologies.

Point paper bindesign Pedro Martins Pereira | Larus

Furniture

A 62

85

600

730

Ø350385

600

85

300

Ø350

300

Ø200

Ø200

600

85

Ø200

Ø350

Ø424

600

300

Ø350Ø200

817

120

Ø169

Ø104

40

Point paper bin

Body: BS EN 1561:1997 (LR FF1) standard, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Support: S275JR (LR A1) steel tube, metallized and painted. Lock: triangular key in AISI 316 (LR AX1) stainless steel. Paper bin with cover: BS EN 1561:1997 (LR FF1) standard, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).

Point paper bin with horizontal liddesign Larus, Carrilho da Graça

Compact soil (urban)Concrete foundationCapacity: 42 L

Point paper bin_attached to pole

Point paper binwith inclined lid

Liquid painting

Steel

Cast iron

Metallization


Rotomolded plastic

Point paper bin with horizontal lid and ashtraydesign Larus, Carrilho da Graça

Detail

closed open

www.larus.pt | +351 234 520 600A 63

Use of high-quality materials and minimal use of components.

Sac paper bindesign Pedro Martins Pereira | Larus

Furniture

A 64

490 900

Ø400

Ø317

Body: AISI 304 (LR AX1) steel plate. Inner ring: AISI 304 (LR AX1) stainless steel rod.Support and lid: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in RAL 7016 (LA RA6). Lock: triangular key in AISI 316 (LR AX1) stainless steel.Capacity: 30L.Fixing: element fixed to the ground with lead solder (LR F3).


Liquid painting

Cast iron

Metallization

Steel


www.larus.pt | +351 234 520 600A 65

Beach Eco Points, providing an effective adaptation to seaside locations, with good sized bins in appealing colours.

Waste Separation Binsdesign Larus

Furniture

A 66

Ø500

925

200

RAL 5003

RAL 5017

RAL 6029

RAL 6024

RAL 1021

RAL 1016

RAL 3000

RAL 7013

RAL 9001

RAL 9004

Body and lid: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin in blue, yellow, green and grey. Waste disposal through side opening. Connection between lid and main body through AISI 304 (LR AX1) stainless steel hinge, preventing the lid from being stolen.Vinyl sticker on the lid indicates type of waste.Support: S275JR (LR A1) galvanized steel tube.Inner container: rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin for the placing of bin liners.Capacity: 105LFixing: element fixed to the ground with lead solder (LR F3).




Steel

Stainless steel

Galvanized steel


Rotomolded plastic

www.larus.pt | +351 234 520 600A 67

For use in public spaces, allowing all users to easily and effectively access the water irrespective of their mobility or physical condition. By flexing the spring, the water flow mechanism is activated allowing one to determine the direction of the water jet.

Beburb Drinking Fountaindesign Carlos Pereira

Furniture

A 68

B01 B02 B03

Sizeheight 1000mmdiameter 2000mm

B01Spout: AISI 304 (LR AX1) stainless steelBase: GraniteFixing: element fixed to the ground with lead solder (LR F3).

B02Spout: AISI 304 (LR AX1) stainless steelBase: AISI 304 (LR AX1) steel plateFixing: element fixed to the ground with lead solder (LR F3).

B03 (stainless steel grid)Spout: AISI 304 (LR AX1) stainless steelGrate: AISI 304 (LR AX1) stainless steelFixing: element fixed to the ground with lead solder (LR F3).


Granite

Stainless steel

www.larus.pt | +351 234 520 600A 69

Elegant, conventional option.Gravi Version.

Urbus drinking fountaindesign Pedro Martins Pereira | Larus

Furniture

A 70

Urbus

Ø375 Ø375

903

Ø190Ø90

Gravi

Ø270

Ø14

15

400

Fixings and water connection

Cut-off tap with ½ inch screw ½ inch male connector Ø 6mm exterior1mm wall

Discharge hoseØ 23mm exterior3,5mm wall

Drilled base for fastening by screws

Bowl: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tube and base: AISI 316 (LR AX2) stainless steel stripped, metallized and painted. Spout and timer button: chrome plated brass.Gravi version: body made of conglomerated cement gravel, surface washed. Fixing: element fixed to the ground with lead solder (LR F3).


Liquid painting

Cast iron

Metallization

Steel


www.larus.pt | +351 234 520 600A 71

A choice of contemporary architecture in round or square versions.

Línea drinking fountaindesign Pedro Martins Pereira | Larus

Furniture

A 72

200

200

Ø230

900 900

Cubic lineRound line

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) Spout and timer button: chrome plated brass.Options: Round (round) and Cubic (square) Fixing: element fixed to the ground with lead solder (LR F3).


Liquid painting

Cast iron

Metallization


www.larus.pt | +351 234 520 600A 73

Simple and functional line, easy to remove when transporting to a new location, due to the nature of its installation characteristics and adaptability to different scales.

Parque linedesign Pedro Martins Pereira | Larus

Furniture

A 74

200

450

750

LT

900

30

300

425

750

200

450

6501490

1000

LT

1840

Section to be placed underground

Backrest for bench

Table and benchesStructure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: The section to be placed underground (20cm) has been painted with three complementary antioxidant paints.There is no need to bolt the structure, allowing it to be moved to a new location.

It is also possible to have a 2 bench version, as the equipment can be attached by bushings or anchor bolts.

Liquid painting

Varnish

Metallization

Steel


Wood

www.larus.pt | +351 234 520 600A 75

Line consisting of bollard, cycle stand, ashtray and dog waste bin, formally exploring the linearity of the iron bar, as a characteri-zing element.

Ufo Linedesign Pedro Martins Pereira

Acessories

A 76

100

120

10001000

150

250

80

600

80

900

80

45

900

1800

450

430630

560

725860

235

400

bicycle rack

dog waste bins ashtray

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper BinS275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel. Capacity: 35L. Fixing: element fixed to the ground with lead solder (LR F3).

Bicycle rack Body: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Dog waste binsBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Bin and bag dispenser: AISI 304 (LR AX1) stainless steel, brushed. Fixing: element fixed to the ground with lead solder (LR F3).

AshtrayBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1) Containers: brushed AISI 304 (LR AX1) stainless steel.Fixing: element fixed to the ground with lead solder (LR F3).

Fixed bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).

Retractable bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).

Rebuttable bollardBody: S275JR (LR A1) steel bar stripped, metallized and painted. Standard version in forge enamel (LR EF1). Fixing: element fixed to the ground with lead solder (LR F3).


bench with armrest

bench with backrest

bench without armrest and backrest

paper bin

fixed bollard bollard retractable bollard rebuttable

Liquid painting

Wood

Varnish

Metallization

Steel


Stainless steel

www.larus.pt | +351 234 520 600A 77

Angola. Savannah.The playful, grotesque and surprising physiognomy of the secular baobab tree, is distinguished within this lonely and warm wilderness.The historical and cultural reference intervened in the street furniture project, strengthening its local identity.The cast iron, a noble material, gives body to the trunk and the branches of the tree, which support the slats of the park benches. The timber used is autochthonous.The bollards, in cast iron for the same reason, suggest the trunk, but more elegant. They also served as support to the paper bin, of considerable dimensions, as is local practice, whose basket is produced in metalized and painted steel, galvanized steel or stainless steel.

Embondeiro Linedesign Pedro Martins Pereira

Furniture

A 78

1800/1300

1400/900

650

450 405

Ø400

800

480

1800

1400

817

648

450 405

120

800

85

Bench with backrest Bollard

Paper binBench without backrest

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

BollardsBody: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Paper BinLeg: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Container: Rotomoulded plastic with DOWLEX NG 2432.10NE (LR R1) polyethylene resin. Lock: triangular key in AISI 316 (LR R1) stainless steel.Capacity: 60L Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Wood

Cast iron

Metallization

Steel

Varnish

Liquid painting

www.larus.pt | +351 234 520 600A 79

Benches with a depurated language and a rational design.Standard cast iron sides, Euronorm 1561:1997, blasted, metallised and painted.Blasted metallised and painted sheet steel structure.Tali wood seating protected by U.V. varnish.Logo engraving option.

Ária Benchdesign Pedro Martins Pereira

A 80

1810

570

790 620 790

570

2040

895

700

BenchesLegs: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in forge enamel (LR EF1).Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


B 1www.larus.pt | +351 234 520 600

The inclined angle unites the compo-nents of this light: the vertical elevation of the pole and the horizontal projection arm. Inside the tube of the lamp, there is an almost vertical projection of light. The cut in the tube shows the intersection between the cylinder and the illumination cone. Maintenance is made easy, thanks to its upper access. The brief and easily recycled concept, inspires a quality of life reduced to essentials, to life in freedom.

17º lighting poledesign Francisco Providência

Lighting

B 2

5500500

17º

500

4530

65º

Ø114

150w 110

100

90

80

70

60

50

40

30

20

10

Lux1086420m28 6 410

0m

1

2

3

4

5

1400

Average luminance (70/150W)- With a 6m removal - 37/80Lux- With an 8m removal - 32/70Lux- With a 10m removal - 23/50Lux

maintenance

Photometric Plan3 poles150w Lamp10m SpacingTrack width of 5.5m

PoleTube: AISI 304 (LR AX1) stainless steel or S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1).Light bulb: 70/150W metal iodides, Colour. temperature: 2800K IRC > 80 Electronic ballast.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Metallization

Stainless steel

Steel


Lighting


17º LED ColumnPower: 35WColour temperature: 4000ºKLuminous flux: 2700 lm IRC: >80Possibility of regulating the luminous flux.

B 3www.larus.pt | +351 234 520 600

Lighting

Alta lighting pole design Daciano da Costa

The lighting pole for the linear park in the central axis of “Alta de Lisboa” was developed in order to relate to the immediate surroundings. It becomes the “speech” embodied in “thing”, starring or simply animating the paths. The use of an organic formal language led to a set of “plant” objects. The lighting pole is the most exemplary of them.

B 4

3550

3050

500

Ø400

150

0.00

8.00m

0.00 14.00 28.00m

10 20 30 40 lx

4.00m

Liquid painting

Metallization

Cast iron

Steel


Lighting


Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted; S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Alternative: Cast Aluminium body.Cut-off globe: Crystal polycarbonate; outer hood aluminum painted according to the structure. ULOR <1,5%IRC > 80.Impact resistance: IK10Liquids and dust intrusion resistance: IP55 Light bulb: 100W metal iodides. Colour temperature: 2800K. Fixing: element fixed to the ground with lead solder (LR F3).Foundations to be carried out by the client according to technical information made available.

Photometric Plan3 poles14m SpacingTrack width of 8m

B 5www.larus.pt | +351 234 520 600

Lighting of pedestrian zones, incorpora-ting technical components in the pole, allowing for a discreet presence.Solar solution with LED technology, en-suring higher energy efficiency and better quality of lighting, leading to greater safety with low maintenance costs.Environmentally friendly product.

Solar poledesign Francisco Providência

Lighting

B 6

1000

Ø1591000

5000120º

H

45º

11º

3500

H

3,5x H

17,5

12,5

7,5

15

10

5

Mounting height

(H)

Spacing

(H)

Coverage area

(H)

3m

3,5m

4m

4,5m

10,5m

12,25m

14m

15,75m

31,5m²

42,8m²

56m²

70,8m²

The low emissionabove the inclinationof 56º ensuresboth low levels ofglare and lightpollution.

Photometric Plan

12VDC/15Ah Gel batteries45W Photovoltaic panelLED Module:- Luminous Flux ~920lm- Power ~ 11.5W- Colour temperature 5300ºK (typical)- IRC > 70- High lighting uniformity- Compliance with EN13201-2 standard - IP66/IK08- 4 day autonomy (16h/day), in adverse weather conditions- Ideal spacing between columns: 3.5x mounting height (H)- Recommended mounting height: 3.5 to 4m- Coverage area of 3.5xHxH m2 (where “H” is the mounting height)

Tube: S275JR (LR A1) steel metallized and painted. Standard version in forge enamel (LR EF1)Lamp module and photovoltaic panel: rotomoulded plastic in DOWLEX NG 2432.10NE (LR R1) polyethylene resin.Diffuser: High optical performance polycarbonate, with UV and static protection treatment.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Possibility of intelligent management:- optimized energy consumption in accordance with environmental lighting conditions (through flow regulation)- centralized and remote management,- Real time weather forecast (monitoring and management of infrastructure);

Liquid painting

Metallization

Rotomolded plastic

Steel


Solar lighting

B 7www.larus.pt | +351 234 520 600

Gemini Column and Pergoladesign Pedro Martins Pereira

Depurated language and rational design light column. Blasted metallised and painted sheet steel structure. Light with Led technology.Option of a 2 light points column(Gemini 6/4 8/4) or just 1(Gemini 6/8).

B 8

6000

88%

97º

78%

97º

88º

8000

88º

97º

945

78º

4000

450

97º

88º

78º

3982

2984

4984

4000

3450

LT240

32224000

LT2

Tube: steel S275JR (LR A1) blasted, metallised and painted. Standard version in forge enamel (LR EF1).

Lamp modulus:

Gemini 6m: Power: up to 35WColour temperature: 4000ºKLuminous flux: 3300lm @ 35WIRC: >80Possibility of regulating the luminous flux.

Gemini 6/4m: Branch at 6m:Power: 35WColour temperature: 4000ºKLuminous flux: 3300lm IRC: >80Possibility of regulating the luminous flux.

Branch at: 4m:Power: 18WColour temperature: 4000ºKLuminous flux: 2000lm IRC: >80

Possibility of regulating the luminous flux.

Gemini 8m: Power: 55WColour temperature: 4000ºKLuminous flux: 4500lm IRC: >80Possibility of regulating the luminous flux.

Gemini 8/4m: Branch at 8m:Power: 55WColour temperature: 4000ºKLuminous flux: 4500lm IRC: >80Possibility of regulating the luminous flux.Branch at 4m:Power: 18WColour temperature: 4000ºKLuminous flux: 2000lm IRC: >80Possibility of regulating the luminous flux.

Fixing: with threaded rods in stainless steel AISI 304 (LR AX1) anchored directly to the pavement/foundation with chemical plugs (LR F1).Easy to remove if necessary.


www.larus.pt | +351 234 520 600C 1

ALIADOS GRATEDESIGN SIZA VIEIRA | SOUTO MOURA

SATURNO GRATEDESIGN ALCINO SOUTINHO

QUADRIS GRATEDESIGN PEDRO MARTINS PEREIRA

ALTA GRATEDESIGN NPK

CRIVA GRATEDESIGN NPK

GG GRATEDESIGN JORGE TRINDADE | LARUS

GP GRATEDESIGN JORGE TRINDADE | LARUS

Grates for tree ditches made of Euronorm cast iron 1561:1997, metalli-zed and painted.

Acessories

WIRL GRATEDESIGN SOUTO MOURA

ALIADOS SQUARE GRATEDESIGN SIZA VIEIRA | SOUTO MOURA

ROUND GRATEDESIGN LARUS

GRATE WITH METAL GUARDRAILDESIGN LARUS

TETRIS GRATEDESIGN LARUS

AGAL GRATEDESIGN LARUS

40AB

Ø2000Ø950

40

Ø500 Ø1200

18184

18184

1035

1035

Ø940 5

Ø940 5

45

Ø970Ø610

50

1200

400

1200

B

A

B

A

AB

B

A

AB

AB

A B

1035

esc.: 1/40 esc.: 1/10

Ground level grate

Raised grate

ALIADOS 2000 GRATEDESIGN SIZA VIEIRA | SOUTO MOURA

SATURNO GRATEDESIGN ALCINO SOUTINHO

QUADRIS GRATEDESIGN PEDRO MARTINS PEREIRA

ALIADOS 1200 GRATEDESIGN SIZA VIEIRA | SOUTO MOURA

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7). Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.

Raised grate with Rim

www.larus.pt | +351 234 520 600C 1

1500

45

690

1500

35

1200

1200

A B

A B

450

1200

1000

35

450

660

35

500

1240

400

630

40

A B

AB

AB

AB

AB

AB

A B

A B

GG2 1500 X 1500 GRATEDESIGN LARUS | JORGE TRINDADE

GG1 1200 X 1200 GRATEDESIGN LARUS | JORGE TRINDADE

GG 1200 X 1000 GRATEDESIGN LARUS | JORGE TRINDADE

GP GRATEDESIGN LARUS | JORGE TRINDADE

Acessories

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).

esc.: 1/40 esc.: 1/10

GRATE GG 630x400DESIGN LARUS

66 35 AB

1480Ø600

A B

B

AØ600 Ø1480

66 35

40

Ø600 1480

A B

40

Ø600 Ø1480

B

A

AB

AB

AB

ALTA Q GRATEDESIGN NPK

ALTA C GRATEDESIGN NPK

CRIVA Q GRATEDESIGN NPK

CRIVA C GRATEDESIGN NPK

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.


esc.: 1/40 esc.: 1/10

www.larus.pt | +351 234 520 600C 1

1200

1200400 800

40

1000

1000300 700

40

1200

1200

40

Ø500

1000

1000

Ø500

40

990494

990Ø500

35


WIRL GRATEDESIGN SOUTO MOURA

ALIADOS SQUARE GRATEDESIGN SIZA VIEIRA | SOUTO MOURA

ROUND GRATEDESIGN LARUS



1400

625

50

600

1530

1200

Ø1500

50

Ø800

1200|1500

1200|1500

50

1800|2000

1800|2000

50

GRELHA WITH METAL GUARDRAILDESIGN LARUS

TETRIS GRATEDESIGN LARUS

AGAL GRATEDESIGN LARUS

Body and rim: corten steel

Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1) or in Epoxy coating in dark grey (LR RA7). Rim: S275JR (LR A1) steel stripped, metallized and painted.Guardrail: S275JR (LR A1) steel stripped, metallized and painted.

Body and rim: S275JR (LR A1) steel stripped, metallized and painted.

C 3www.larus.pt | +351 234 520 600

Spindle shaped bollards, with circular section, a consequence of the traditional limestone bollards historically called Fradi-nhos. Metal tubes may be used to unite the bollards so they may be used as guard rails.

Fradinhosdesign Daciano da Costa

Acessories

C 4

680

250

2570

360

LT LT20

c c

Fradinho FR3 Fradinho FR4

threaded tube

Fradinho FR3Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixing: element fixed to the ground with lead solder (LR F3).

Fradinho FR4Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixing: element fixed to the ground with lead solder (LR F3).


Liquid painting

Metallization

Cast iron


C 5www.larus.pt | +351 234 520 600

Bollards used for various purposes.

Bollardsdesign Larus

Acessories

C 6

1200 900

76

P1 P2 P3 P4 P5

730

500

300

1000900

12589

Fixed bollard Rebuttable bollard Removable bollard Retractable bollard Lighted bollard

Retractable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).

Iluminated BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: fstandard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).White acrylic sheet 4mm, clear acrylic sheet 2mm. Lock: triangular - access to the circuit cut case 1469C. Light: dulux EL ECO E27 16W/21/840.Fixing: element fixed to the ground with lead solder (LR F3).


Fixed bollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Fixing: element fixed to the ground with lead solder (LR F3).

Foldable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).

Removable BollardBody: steel tube S275JR (LR A1) metallized and painted. Standard version in RAL 7016 (LR RA6).Top: standard cast iron, stripped, metallized and painted. Standard version in RAL 7016 (LR RA6).Lock: triangularFixing: element fixed to the ground with lead solder (LR F3).

Liquid painting

Metallization

Steel

Cast iron


C 7www.larus.pt | +351 234 520 600

Acessories

Flexible urban barrier for the protection of pedestrian spaces. When hit by a car, flexes and absorbs the impact. Does not damage the sidewalk, the object or the vehicle. Cushions possible impacts sustained by pedestrians.

Burb bollards design Carlos Pereira

C 8

640

200

02 0301 02 0301

120011001000950900

800

700

600

500

400

300

200

100

100 200 300 400 500

100 450

1200

1000

800

600

400

200

0

05 0 100 150 200 250 300 350 400 450

Body: stainless steel 40mm nominal diameter steel cable vs 580mm length; one end has a cap; the other end has a torn tube with a flange intended for fixing to the ground.

01 fixed version02 removable version03 retractable version

Stainless steel

C 9www.larus.pt | +351 234 520 600

The Vesúvio bollards are intended to solve the problem of illicit invasion of public sidewalks by vehicles, without inflicting an overly excessive formal or physical aspect, the sloped surface facing the pedestrian and the more aggressive edge facing the road.

Vesúvio bollarddesign Alcino Soutinho

Acessories

C 10

166

338 262 347

245

340

Vesúvio 17 Vesúvio 25

Mounting System

Vesúvio 17Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).Fixing: element fixed to the ground with lead solder (LR F3).

Vesúvio 25Body: BS EN 1561:1997 (LR FF1) standard cast iron, stripped, metallized and painted. Standard version in Epoxy coating in dark grey (LR RA7).Fixing: element fixed to the ground with lead solder (LR F3).


Liquid painting

Metallization

Cast iron


C 11www.larus.pt | +351 234 520 600

Containers for disposing of dog waste. The round tube is not aggressive or hazardous to the public in general and colours may be customized. The movable top edge, holds the disposable bags and when lifted, allows access to the liner on the bottom of the container. When opening of the latch, the lid will fold thus allowing for maintenance.

Dog waste binsdesign Jorge Trindade

Acessories

C 12

220

Ø125

1070

Closed container open container

Bag removal

Telescopic opening

Cross section of lid

Roll of plastic bags

Dog waste binsBody: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in Aral Cin (LR RA7).Movable top: round S275JR (LR A1) steel tube, stripped, metallized and painted. Standard version in RAL 6018 (LR RA2). Incorporates disposable bags. When lifted, allows for access to the line on the bottom of the body of the bin. It is also from here that, upon opening of the latch, the lid folds, allowing maintenance.Guides, handle and inner ring: AISI 304 (LR AX1) stainless steel. Fixing: threaded rods of AISI 304 (LR AX1) stainless steel bolted to the ground using chemical bushing (LR F1).


Liquid painting

Metallization

Steel

Stnailess steel


C 13www.larus.pt | +351 234 520 600

In the continuous model, each module cor-responds to a six meter hot-pressed bar.In the triangular model, the bikes are held by their frame.

Continuous parkingdesign Pedro Pereira

Triangular parkingdesign Francisco Providência

Acessories

C 14

364 637 910 1183

860

600

780 1140 1500

645

420

Triangular module

1 module1 seat

2 modules2 seats

3 modules3 seats

4 modules4 seats

Continuous parking

2 module4 seats

3 modules6 seats

4 modules8 seats

Continuous ParkingBody: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Lock mechanism: S275JR (LR A1) steel bar, stripped, metallized and painted and S275JR (LR A1) steel pipe, stripped, metallized and painted.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used.

Triangular ParkingBody: S275JR (LR A1) steel bar, hot-pressed, stripped, metallized and painted. Standard version in forge enamel (LR EF1).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1). As an alternative, segmented bushings may be used.


Liquid painting

Metallization

Steel


1 module2 seats

C 15www.larus.pt | +351 234 520 600

By using the Prumo Larus concept, it is possible to hide the fixings, thus enabling a much purer finish. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing. The gussets that tighten the shade screens, are fixed to the plumb-bob by pipes which allow for height adjustment as well as com-pensating where the ground is uneven.

Shade structuresdesign Pedro Martins Pereira | Larus

Acessories

C 16

3500

3720

3720

3500

A-A

A AA

A

The plan dimensions may be changed.

Shade StructurePlumb bob: Anodized aluminium in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. The metallized and painted S275JR (LR A1) steel gussets tighten the perforated shade screens which, upon attachment to the plumb bob by S275JR (LR A1) steel tubes, allow for regulation of height, compensating for any unevenness in the ground. Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


Liquid painting

Perforated shade screens

Metallization

Steel

Anodized aluminium


C 17www.larus.pt | +351 234 520 600

An adjustable solution, capable of adapting to different sceneries without becoming too overwhelming.

Shade pergoladesign Pedro Martins Pereira | Larus

Acessories

C 18

5000 4000 3000

3000

5000

2900

3000

3000

8800

Other dimensions

Shade PergolaStructure: Adjustable square plumb bob made of S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Slats: Nordic Pine wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Other coverage solutions on request.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


Liquid painting

Perforated shade screens

Varnish

Wood

Metallization

Steel

Anodized aluminium


D 1www.larus.pt | +351 234 520 600

The harmony of contrasts is present in the work of Mondrian, who said: “Squares! But I never drew squares”.

Mondrian Kiosksdesign Larus

Kiosks

D 2

2600

366

1210

2720

924

Structure: Panels with high-density compounds soaked in thermo-hardened HPL 3000x1350x14mm (LR RF1) phenolic resins, structured with vertical gussets and horizontal outlines of S275JR (LR A1) steel, metallized and painted. Cover: polyester resins reinforced with fibreglass. Base: metal structure in S275JR (LR A1) steel, metallized and painted. Floor: JomarDeck (LR CJ1) plywood coated with a phenolic film and slip resistant finishing.May be adapted to different uses.

Liquid painting

Fiberglass


Metallization

Steel

Phenolic resin panels


D 3www.larus.pt | +351 234 520 600

Modular and easy to integrate into both historical or contemporary places, this confi-guration is adaptable to diverse locations.

Arqui Kiosksdesign Jorge Trindade | Larus

Kiosks

D 4

2060

3060 3060

2950

12840

11000

5000

5000

3500

8000

9000

9000

6000

2960

7890

6000

5000

5500

2500

2970

2970

Kiosks Arqui 3x2 Examples of other dimensions

Phenolic resin 756

Structure: S275JR (LR A1) steel tube stripped, metallized and painted. Standard version in RAL 7011 (LR R2). Cover: polyester resin reinforced with fibreglass, with rainwater management system of piping inside the supports. Exterior coating: HPL or MEG Wood finish SEI-A 756 (LR RF1) phenolic resins.Interior coating: 30mm sandwich plate, smooth on one side and textured on the other. Drop ceiling: metal structure in S275JR (LR A1) steel with metallized sandwich plate sheets. Ventilation grids: thermo-lacquered aluminum.Possibility of including tempered glass panels, access doors, service windows, opening panels, WCs and other types of finishing.

Liquid painting

Fiberglass


Metallization

Steel


Aluminium

Tempered glass


D 5www.larus.pt | +351 234 520 600

Traditional and romantic, easy to integrate into large natural spaces, plazas, parks or public gardens.

Jardim kiosksdesign Larus

Kiosks

D 6

38803300

2160

3560

21603560

2400

930

3500

Jardim 6 Jardim 9

Jardim 11 Jardim 13 Jardim 17

Jardim 25 Jardim 4.5x2.5 Jardim 6x3

3317

2500

2700

3742 2992 5310

3750

45007750

26802500

5200

RAL 7011

RAL 9110

RAL 6005

RAL 3005

Jardim Kiosk 4

Other dimensions

Structure: thermo-lacquered aluminium. Cover: polyester resin reinforced with fibreglass, with with external gutter for rainwater management.Panels: polyester resin reinforced with fibreglass. Protection via opaque panels that open; panels in electro-sold and metallized wire netting or aluminium blinds may also be used. May be adapted to any purpose. The numerical designation corresponds to the inner area.

RAL colors available

Liquid painting

Fiberglass


Metallization

Steel

Aluminium

Tempered glass

D 7www.larus.pt | +351 234 520 600

Beach supportdesign Alcino Soutinho

Modular construction, easily and quickly dis-mantled, in places often pounded by the sea during Winter. Allows for complete rainwater drainage.

Kiosks

D 8

2613

3830

3702300

Modular construction: marine plywood coated on both sides with polyester resin reinforced with fibreglass. Connecting parts: AISI 304 (LR AX1) stainless steel.The basic version has modules for customer care; kitchen, first aid facility, storage and WC (Male, Female and / Handicapped).Multiple modules may be joined together. Solution for rainwater drainage through the joining rails of the module.Intended for placement at locations often pounded by the sea during Winter, hence its easy-to-dismantle nature.

Fiberglass

Stainless steel

Marine plywood

Modular

D 9www.larus.pt | +351 234 520 600

Hardware for beachwatch support.This hardware draws visible reference from the wooden decking slats and solar protection awnings of boats.Modular construction, easy to dismantle, using corrosion-resistant materials.

Lifeguard towersdesign ESAD

Kiosks

D 10

11000

2860

700

11000

2860

700

Modular construction: easy to dismantle with a metal structure in S275JR (LR A1) steel, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tube section profile: AISI 316 (LR AX2) stainless steel enhancing resistance to corrosion.Treatment for plating based on epoxide resins hardened with polyamide resins and pigmented with zinc dust. Painting: Anticorrosive enamel. Interior paving: Anti-slip maritime plywood. Outdoor paving: 100% recyclable composite deck.Walls, ceilings and doors: OSB plates reinforced with layers of polyester resin reinforced with fibreglass. Metal hardware and locks: AISI 316 (LR AX2) stainless steel.Fixed windows: steel profiles in grey lacquer with tempered glass.Shade structure: micro-perforated screen and AISI 316 (LR AX2) stainless steel frame. Mast for placing of banner: AISI 316 (LR AX2) stainless steel.Electrical installation: solar panel providing energy independence to the watchtower. Side wings: slats of Kambala wood, lacquered in the colour RAL 9003 (LR RA3).Protection: Rope.Fixing: Wooden beam foundation previously fixed to the structure (LR F5).

Liquid painting

Fiberglass



Solar lighting

Metallization

Steel

Stainless steel

Modular

Varnish

Wood

Aluminium

Tempered glass


D 11www.larus.pt | +351 234 520 600

Kiosks

Equipment for selling and exhibit newspapers and magazines. Very compact when closed. When open, side doors and front panel with shelves and racks. Indexed mupis, for the posterior surface, maximizing the equipment or promoting presence.

Ardina Kioskdesign Larus

D 12

1175

22602700

3845

835

2700

1175

1385

Liquid painting


Steel

Varnish

Wood

Aluminium


Ardina kiosk 2 mupis [2,65 m2]Ardina kiosk 3 mupis [3,70 m2]

Structure: mild steel with leveling feet. Surface finish in anticorrosion gray enamel or other color set by the client. Floor: structure embeded wooden floor, linoleum coated. Coverage: polyester resin reinforced fiberglass. Panels: aluminum frame and polyester resin fiberglass reinforced. Opening side door: aluminum frame and polyester resin fiberglass reinforced. Foldable / hinged door: stainless steel shelves. Inner shelves in zinc painted sheet. Mupis: 1 illuminated face display; thermo aluminum frame with bended Zincor plate structure; tempered glass face.

D 13www.larus.pt | +351 234 520 600

Kiosks are the solution for many small business investors. They are sales points that have reduced installation costs. Terrace bars allow us to enjoy the urban environment while providing protection from weather conditions This type of hardware, often with a privileged location, gives life to open spa-ces, meeting the demands of integration into historic, rural or contemporary areas. We have resorted to the use of resistant materials so as to avoid maintenance costs or the degradation of hardware.

OTHER KIOSKSOUTDOOR TERRACE BARSdesign Larus | Mário Vaz | Mattos David |Jorge Trindade | João Matos

Kiosks

D 14

SIMPLES4,49m²GRANDE7,56m²

PARQUE5,47m²

OCTUS3,8m²

SANDWISH BAR OCTUS3,35m²

LISBOA2,92m²

UNIVERSAL2,83m²

TUBOS4,84m²

VERSÁTIL2,96m²

TERRACE BARSTERRACE BARS

D 15www.larus.pt | +351 234 520 600

VISUAL16m²

PIRÂMIDE3,84m²

AVEIRO2,83m²

BANCA ARDINA3,7m²

BANCA ENGRAXADORES2,12m²

BOTAS2,31m²

TATAMI

PÉRGOLA

Kiosks

D 16

Kiosque URBUS5m²

EXPO12m²

CUBOS FORTE4,84m²

ARQUI5m²

D 17www.larus.pt | +351 234 520 600

The project, intended to respect the surroun-ding area of the old XVII century military de-fence building, was built using copper sheet for the cover and on some of the facades.Slate in the interior paving; sliding doors.

Beach Terrace Bar | Vila do Condedesign Paula João

Design concept that contrasts with the historic architecture and romantic garden surroundings, hence also the external cla-dding in alucobond.

Urban Terrace Bar | Guardadesign Joaquim Carreira

Kiosks

D 18

Containerized cafeteria / bar serving as sup-port to the river-tour pier of Entre-os-Rios.

Terrace Bar | Entre-os-Riosdesign Paula João

Resulting from the transformation and modernization of a degraded historic centre. An ambitious project was undertaken for the pedestrianization and removal of road traffic. The redesigning of the park led to it being occupied by several public facilities, allowing for new commercial and recreational uses, respecting the older building structures and introducing an impressive new structure, large in size but nevertheless gracious, thus conferring a modern look to the older styles.

Terrace Bar | Castelo Brancodesign Josep Lluís Mateo

On the coastal slope of Almada, facing the city of Lisbon, a terrace bar was built, allo-wing for the enjoyment of the Tagus river and the capital city views.Using copper sheets around the ledges.

Terrace Bar | Almadadesign Larus

E 1www.larus.pt | +351 234 520 600

Structural Post, with a discreet presence, which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing.

Larus poledesign Pedro Martins Pereira | Larus

Signage

E 2

Ø107

Fitting system

Post base

Post top end

Post: Anodized aluminium structure in C177006 (LR AL1), C177.007 (LR AL2), C177.009 (LR AL3) profile or painted. With a discreet presence which allows fixings to be hidden when being used as a Signpost. The matte anodized finish helps soften any acts of vandalism. Available in a lacquered finishing.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).Signposts: In lacquered aluminium, 4mm thick.


Liquid painting

Aluminium

Anodized aluminium


E 3www.larus.pt | +351 234 520 600

Signage systems with a simple, economical and easy maintenance conception. Use of round tubes in the Rondo Line and square tubes in the Quadris Line.

Quadris | rondo linedesign Larus

Signage

E 4

Rondo line Standard pole

Standard plate

height: 3m

Ø80mm | 3mm thickness665x200mm

Stainless steel M8 screws,with a Torx semi-sphericalhead, with a special key

Quadris line

Standard pole

Standard plate

height: 3m

80mmx80mm | 3mm thickness600x200mm

Stainless steel M8 screwsTube, base and plates inmetallized and painted steel

Rondo LinePost: on circular bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1).Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Quadris LinePost: on square bob of S275JR (LR A1) stripped, metallized and painted steel. Standard version in forge enamel (LR EF1).Signposts: in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in RAL 9010 (LR AR4).Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


Liquid painting

Metallization

Steel


E 5www.larus.pt | +351 234 520 600

Check-Up Track

authorship Iberia Healthcare, Dr. António

Lúcio Baptistadesign Larus, Marta Afonso

Based on the concept of “Self-Assessment”, “Check Up Tracks” were designed to be mainly developed in municipal structures already in place, with pedestrian footpaths that serve the local population.In the designated areas 11 billboards are placed along a training circuit already indi-cated through complementary directional signposts. Along the way, the park users are encouraged to perform a series of physical tests which will help alert them or make them aware of various health related issues. All of the readings are then recorded onto a sheet of copy paper which is delivered to the users and which they may use as reference in the future. A copy of this sheet may also be left at the park enabling the undertaking of studies and statistics regarding the general health of the local population.Before starting their pedestrian circuit, users are referred to the “Check up Centre”, an indoor area, where they may find a series of medical equipment and informational boards.After undertaking the various assessments available there, they should go outdoors again so they may start the circuit.

Signage

E 6

600

1800

1000

200

200

500

600

1800

1000

200

200

500

300

ROTATIONAL VIBRATINGPLATFORM

extra equipment

PEDOMETERStep counter

TAPE MEASUREMeasurement of Abdominal Circumference

OXIMETERMeasuring the concentration of oxygen in the blood

SPHYGMOMANO-METERMeasuring of Blood Pressure

UROFLOWMETRYDetection of Prostate related problems

PODOSCOPEFoot assessment tool

HEART REAT MONITOR

SUGAR LEVEL METER

DEFRIBILLATOR Basic life support

SCALES + HEIGHT GAUGEMeasuring of Body Weight andMeasuring of Height

INDOOR - CHECK-UP CENTER Equipments

OUTDOOR - PEDESTRIAN PATH

INDOOR

Indoor panelStructure: bended aluminium sheet OL.838059.1 anodized (LR AP1).Digital printed vinyl directly applied.Fixings: threaded rods (LR F6).

OUTDOOR

Outdoor panelStructure: S275JR (LR A1) 2mm circular pole, metallized and painted steel. S275JR (LR A1) 3mm bended steel sheet, stripped, metallized and painted; welded. Standard version RAL 7011 (LR RA5). Panels: HPL phenolic resin / MEG Wood finish SEI - A (LR RF1). Low relief engraving and digital printed vinyl.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Directional plateOutdoor panel Traveled Distance

Directional platesPlate: S275JR (LR A1) stripped, metallized and painted steel. Standard version RAL 7011 (LR RA5). Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Traveled distance plateStructure: AISI 316 (LR AX2) brushed stainless steel sheet. Footprint placed every 100m indicating traveled distance, serving as feedback for health professionals in case of circulatory or joint problemsFixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).


Liquid painting

Metallization

Steel

Stainless steel



E 7www.larus.pt | +351 234 520 600

Mini Totem design Larus

Signage

Totem for cultural and tourist information to be installed next to locals and buildings of interest.

E 8

40040

1500

1800

60040

4040

Liquid painting

Metallization

Steel


Structure: S275JR stripped, metallized and painted steel sheet.Colour to be chosen by the client.Information via serigraphy (1 colour).Front & rear information appliacation possible.Fixing: element fixed to the ground with lead solder (LR F3). Foundations to be carried out by the client according to technical information made available.

F 1www.larus.pt | +351 234 520 600

Mupi information panel in console or totem style display cases, for standard sized posters. Single or double sided, with the possibility of lighting.

Mupidesign Pedro Martins Pereira | Larus

Shelter

F 2

160

610

1940

540

1170

1400 190

1710

2570 2700

1400

160

Panel mupi Totem Mupi

Mupi Console PanelStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Lighting: T5/G5/28W (lower consumption).Electronic ballasts (non strobe effect).Fuse isolation (for greater protection).Hydraulic shock absorbers (doors).Glass: 6 mm tempered. 5 mm opal acrylic plate for displaying of posters.Opening doors: with hinges on the top end.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

Mupi Totem PanelStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Lighting: T5/G5/28W (lower consumption).Electronic ballasts (non strobe effect).Fuse isolation (for greater protection).Hydraulic shock absorbers (doors).Glass: 6 mm tempered.5 mm opal acrylic plate for displaying of posters.Opening doors: with hinges on the top end.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Metallization

Steel

Tempered glass

Electric instalation

F 3www.larus.pt | +351 234 520 600

Shelter with a very discreet design, easy to integrate into urban, rural, historical or con-temporary spaces.

Arqui shelterdesign Jorge Trindade | Larus

Shelters

F 4

3100

2500 2500

3100 3300

2500

1437

Shelter with MupiShelter with lateralShelter without lateral

Open-sided shelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Shelter with sidesStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Tempered glass.Sides: 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).

Shelter with MupiStructure: S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1) 8 mm tempered glass.Mupi: structure in S275JR (LR A1) steel plate, stripped, metallized and painted. Standard version in forge enamel (LR EF1). 8 mm tempered glass.Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1). Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixing: anchor bolt previously fixed to the ground with lead solder (LR F2).


Liquid painting

Metallization

Steel

Varnish

Tempered glass

Wood

F 5www.larus.pt | +351 234 520 600

Porch structure. Different positioning possi-bilities in accordance with the width of the pavement.

Daciano da Costa shelterdesign Daciano da Costa

Shelters

F 6

1100

2390

3980

1680

2390

1900

1300450

450

AB2 shelter

AB1 shelter

AB1 ShelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. 8 mm tempered glass.Cover: polyester resins reinforced with fibreglass. Suspended ceiling: maritime plywood.Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the ground by lead solder with chemical bushing (LR F1).

AB2 ShelterStructure: S275JR (LR A1) steel plate and tube profile, stripped, metallized and painted. Tempered glass.Suspended ceiling: maritime plywood.Cover: with rail grid for collecting rainwater, which is drained through the support beams. Bench: structure in S275JR (LR A1) steel plate stripped, metallized and painted. Standard version in forge enamel (LR EF1) Slats: Tali wood, treated by immersion, with pervasive 420 (LR I1) all’acqua for better absorption of the 120 (LR V1) all’acqua varnish with Xi R36 butyl diglicol, for UV protection.Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).


Liquid painting

Metallization

Steel

Varnish

Tempered glass

Wood

Marine plywood

F 7www.larus.pt | +351 234 520 600

The porch is the linking element between two diagonal plumb bobs, allowing for them to join together side by side, without disturbing the casual look of this design.

Pórtico shelterdesign Jorge Alves

Shelters

F 8

1400

Ø127

3000

2600

3150127 127

1400

Side by side shelters

Structure: Round, S275JR (LR A1) steel tube and bent metal plate, both stripped, metallized and painted. Standard version in forge enamel (LR EF1) Tempered glass.Cover: S275JR (LR A1) steel. Color to be defined. Bench: perforated S275JR (LR A1) steel sheet, stripped, metallized and painted. Standard version in forge enamel (LR EF1)Fixings: threaded rods of AISI 304 (LR AX1) stainless steel fixed to the pavement/ground with lead solder with chemical bushing (LR F1).


Liquid painting

Metallization

Steel

Tempered glass

F 9www.larus.pt | +351 234 520 600

Polis Shelterdesign Larus

F 10

3000

2350

1400

technical informationsteel/stainless steel, cast iron, metallization, galvanization, woods, finishing paint, rotomolding, electricity

ZnFe

STEEL / STAINLESS STEEL

Steel is an alloy combining iron and carbon, with a maximum carbon content of approx. 2.1%.

The non-alloy steel with low carbon content(<0.3%), has a high ductility and goodcharacteristics for the mechanical work andwelding, being the structural steel used byLarus (EN10025).

Steels with a high content of alloying elements, such as stainless steel, contain at least 11% of chromium, ensuring a high resistance against corrosion, forming a thin adhesive film, which protects the material from corrosive attacks in contact with water or moist air. With the appropriate additions of chromium, nickel and molybdenum, it is possible to obtain alloys particularly suited to be used in saline or acidic environments (AISI 316), being the stainless steel adopted by Larus.

CAST IRON

Cast iron is a ferrous alloy with a carbon content higher than 2%.

The lamellar gray cast iron (because it has a grey fracture surface, due to the presence of graphite in the form of flakes) solidifies in astable way, as a result of a chemical com-position within certain parameters, such as high levels of carbon and silicon and of slow cooling laws.This alloy has a high capacity for vibrationdamping, high aptitude for machining, facili-tated by the graphite flakes which have a lu-bricating function, good corrosion resistance in many common environments (greater than carbon and steel) and a reduced contrac-tion of metal associated with good fluidity that facilitates the casting of complex parts produced by Larus.

lamellar nodular

Nodular or spheroidal cast iron is obtained by the liquid bath treatment, with the intro-duction of a small addition of alloying ele-ments (inoculants). The graphite precipitates, not in the form of flakes, but in the form of nodules or spheres, improving substantially its mechanical properties, which approaches it to steel in ductility and tensile strength, being used by Larus particular situations.

METALLIZATION

Protection of a surface, that consists on theprojection of zinc or of a zinc / aluminum alloy (85% Zn – 15% Al), melting and projec-ting the metal wires with a gas (O2 propane or O2 acetylene) or electric pistol.

To be durable, allowing the proper adhesionof the metallization, a careful preparation of the surface of the metal piece is required, to achieve the degreasing, the deoxidation and the necessary roughness of the metal. An abrasive jet of shot blasting SA 2.5 - 3 SA is used (dry compressed air projection – dry and oil-less – or through turbines)

The thickness of the zinc layer comes from the mechanical deposit of zinc particles in the roughness of the support, obtained bysuccessive passages until a minimum thick-ness of 30-40 microns is reached.

ZINCWIRE

AIR COMPRESSEDOXIGEN

ACETYLENEPROPANE

SIS 055900 NormAFNOR NormsA91701 / NBN755 / iso 2063

Painting on metallization

The roughness of the surface favors the per-fect adhesion of subsequent paintings:

- A first layer using very diluted ink (+ or - 30%), applied a maximum of 40 hours after metallization;- Following layers, finishing or intermediate, can be applied immediately after.

Advantagens:

- Long lasting protection against corrosion,with an excellent abrasion resistance, whichlimits the frequency and cost of the mainte-nanceand the assembly of metallic structures, byadjusting the thickness of the coating,depending on the aggressiveness of theenvironment.

- It is an ideal surface for subsequent appli-cation of painting (first layer and finishing).

- No change of the mechanical properties.

Disadvantages:

- The interior areas of pieces are not protec-ted.

GALVANIZATION WOODS

Protection of the surface, obtained by theimmersion in a bath of liquid zinc (min 98%of pure zinc) at about 450 °C. The partsare immersed long enough to reach thebath temperature and then are slowlywithdrawn.

The zinc metallurgically reacts with themetal surface of the piece, forming a zinc/iron alloy whose chemical compositionvaries from 25% Zn - 75% Fe at the base,up to 100% Zn at the surface. Thethickness of the zinc layer obtained is atleast 60 microns.

(100% Zn)

(94% Zn 6% Fe)

(94% Zn 10% Fe)(75% Zn 25% Fe)Metal base

The preparation of the surface of the metalpiece is of paramount importance. It isapplied the same method used to preparesurfaces for metallization.

Painting on galvanization

The surface is phosphatized after a slightabrasive blasting.The Phosphatizing creates a crystallinesurface of phosphates with an appropriateroughness to maximize the adhesionbetween the ink and the zinc layer.

Advantagens:

- As galvanization involves the totalimmersion of the piece, all the surfacesare coated. Even the inside of tubes orhollow parts.

- The thickness of the coating is fairlyuniform, ensuring protection in critical areassuch as edges and corners.

Disadvantages:

- The surface may present runoff of thezinc bath.

Wood is one of the most important buildingmaterials and requires an energy comsump-tion for its production (5 to 7.5 KWH / Ton) much lower than other materials (concrete 25 to 300; glass 6000, plastic 8200 to 20.000, aluminum 72.000).It is also the only renewable building materialand neutral regarding the CO2 emission.

In several conditions it is essential to useprotective measures:

- In contact with ground water, or soaked, the wood may be attacked by fungi;

- In environments of low oxygen content, thewood may be attacked by bacteria;

- Used outdoors, it is susceptible of havingcracks caused by the absorption of water;

- Subject to the action of UV rays, lignin, acomponent of the wood, rots.

Thus, for each use it is necessary to apply the woods with the most recommended features, as well as to employ preserving treatments.

Structure of the wood

Soft wood Hard woodaxial cut

radial

cuttangential cut

axial cut

radial

cuttangential cut

The lighter and softer species have simplerconstruction than the harder and denserspecies.

The shape, the constitution and size of the cells of the tree determine the nature and theproperties of the wood. The cells of the innerlayers are no longer alive and are usually da-rker, due to the formation of resin and oxides that provide natural protection. These cells are closed to fluid transport. Usually this is the most durable and less subject to waterpenetration area. Thus, the protective me-asures are specifically targeted to the outer layers.

A living tree has a water content of above 40%. After slaughter, the water content decreases. At first, the free water evaporates, until reaching the saturation point of the fi-bers. Here, the remaining water is retained in the cell walls and its content is around 30%, depending on the temperature.If the wood dries below the saturation point of the fiber, it shrinks, but it swells again if it ismoistened.

Contraction by drying

tangential

radial

The contraction of the wood is very differentdepending on the direction:

- The tangential contraction is about twice the radial contraction;

- The axial (length of the torus) contraction isvery low, not relevant.

Dense woods have a greater contraction than the light ones. The wood should be dried out before use (until the characteristic content moisture of the application area).

Cells

Green wood(over 30% of water)

Wood at the point ofsaturation of fiber(about 30% of water)

Absolutely dry wood

Cracks and warping

When hitting one side of the timber, thesun and wind remove the surface water. Thewater in the interior will come to the surface at a speed slower than its removal from thesurface. The peripheral layers (more dry)shrink more than the inner layers (more humid), creating internal tensions that are re-lieved with the opening of cracks that soften when the external humidity increases.

FINISHING - PAINT

In the case of a board, the warping is causedby the contraction of the layers under the sunand wind effect, in opposition to the oppositeside, that doesn´t contract in the same wayand is unable to completely counteract thiseffort. Therefore the use of wide boards should be avoided.

The wood cracks the most the lower its den-sity is, because there are more empty spaces between the cells occupied by air.

The wood most used by Larus in its furniturelines is Tali.

This is an exotic wood from Central Africawhich, therefore, is not subject to the action of European agents such as worms, fungi, wood decay, etc. Due to its high density (900 kg/m3), it is very resistant to water pe-netration and thus to the consequences that affect more severely the less dense woods.

Protective varnish

The action of the U.V. rays causes thedegradation of lignin, favoring its decay to athickness that varies between 1mm and 2mm. For a better protection, the varnish used by Larus has iron oxides and other components that, working as lamellae paral-lel to timber surface, promote the reflection of the U.V. rays. The greater the number of varnish applications is, the greater the UV protection would be. However, it darkens the color of the wood.

The wooden slats found in furniture areprotected by non-toxic varnish (aqueous solvent) that is particularly suitable for the use of children.

The initial protection, carried out in the fac-tory, includes the application by immersion of a wood filler that, in addition to improve the U.V. protection, promotes the adhesion of resin to wood, followed by a minimum of two varnish coats without sanding between coats.

Maintenance of Wooden SlatsThe wooden slats require maintenance thatdepends on the environment where theequipment is installed:

- Sanding the wooden slats individually,preferably after cleaning the layer that con-tains decomposed lignin (if this has already occurred).The wooden slats must be sanded to removeany remaining varnish and prepare them forthe varnish, which will provide the necessaryprotection.

- Apply at least two coats of non-toxic varnish (which may be provided by Larus), without sanding between coats.

The regularity of maintenance depends on the environment in which the wooden slats are installed. In a place with natural environmental aggressiveness, it is recom-mended that the maintenance is performed within two-year intervals, when the wooden slats begin to show some wear. This time period should be reduced with the increasing aggressiveness of the environment. With a greater number of varnish coats, we enlarge the time period between maintenance.

Liquid paint - Enamel Forge

On the primary is applied metal enamel withhigh anticorrosive power and weatherresistance. It gives the appearance of wrou-ght iron, with a color formulated for Larus.

Liquid Paint – Epoxy

If we need higher durability, hardness andresistance while maintaining the look of wrought iron, we apply multifunctional epoxy iron oxide paint.

Liquid Paint - Synthetic Enamel

It is an alkyd, solvent, bright, used for thepainting of steel structures. It has good glossretention.

Liquid paint - Polyurethane Enamel

With high brightness, is used in the painting of metal structures. It has high gloss reten-tion and risk resistance. It has an excellent adhesion to iron and wood. It reveals high resistance in corrosive environments.

Dry Paint - Electrostatic powder coating

Without solvents, this paint is used in drypowder. The powder receives a positive electric charge making it electrostatically attracted by the piece. It is cured under heat at 200 ° C.During this process the powder melts into auniform film which, that after cooling, resultsin a uniform coating with excellent finishing.This process presents excellent adhesioncharacteristics, abrasion resistance andchemical resistance. It is an environmentallyfriendly process because it contains no solvents, non-emitting volatile organic com-pounds (VOCs) into the atmosphere.

RAL 5003

RAL 5017

RAL 6029

RAL 6024

RAL 1021

RAL 1016

RAL 3000

RAL 7013

RAL 9001

RAL 9004

ROTOMOLDING ELECTRICITY

Kiosks and Terraces

Protection of People

The protection against electric shock and direct and indirect contact must be ensured, guaranteeing the extinction of defects within the established maximum times (according to the Technical Rules of Low Voltage Electrical Installations).

In the use of TT system (neutral earthed andearthed mass), protection against electric shock requires the implementation of securitymeasures.

In the case of direct contacts, is used theisolation of the active parts or equipments with enclosure IP code equal or superior than IP2X (when it isn’t possible to isolate the active parts).In addition, high sensitivity differential devicesare installed (I n<30mA).

In the case of indirect contacts, differentialdevices are used with sensitivity according tothe circuit to be protected conditions (humi-dity, type of users). Since there are several metal masses accessible simultaneously (kitchens) it is assured the equalization of mass powers.

Facility Security

Due to its serious consequences, in the design of electrical installations the protection against overloads and short circuits is assu-red. Thermal-Magnetic Breakers are installed(automatic cutting devices) at the origin of the circuits, ensuring the protection against these two phenomena and that the circuits do not work for long periods in over load conditions (avoiding overheating) and that short circuits are eliminated before the thermal fatigue time of conductors (avoiding damage to the insulation and changes in the properties of conductor).

Interior Lighting

The facilities are designed according to thecharacteristics of space, ensuring high levelsof energy efficiency and visual comfort.The compact fluorescent lamps with integra-ted electronic ballast (energy saving lamps), used in kiosks and terraces, ensure an efficient interior lighting.

CFLs advantages:

- Low energy consumption

- Good color rendering index (CRI> 85)

- High average length of life (6000h)

- Several color temperatures available

(2700K to 6500K, from warm white to cool

white)

- Elimination of flicker effect (causing eye

strain)

Public Lighting

The main objective is to ensure the safety ofusers of outdoor public spaces (gardens,footpaths, urban roads, high ways) by the implementation of lighting systems thatprovide light levels suitable for the space to be illuminated (EN 13 201).The lighting poles produced by Laruscombine an attractive design with good quality of light.The light quality varies depending on thelighting source used, being constrained bythe color temperature and by the color rendering index (CRI) provided. In order to obtain a high quality of light, Larus uses metal iodide lamps and, more recently, LED light fixtures (light emitting diode).

Characteristics of metal iodide lamps:


- Color Temperature (2800K, warm white)

- Average length of life (6000h)

Characteristics of LED light fixtures:


- Color Temperature (5300K, cool white)

- Average length of life (60000h, the highest

among all sources of light)

- Low energy consumption

Autonomous lighting columns (not con-nected to the mains electricity system):

The development of LED and Photovoltaictechnology, enables the design of autono-mous lighting poles, as is the case of Larus Solar Pole. Such lighting poles produceelectricity during the day through an integrated photovoltaic generator, which is stored in a battery bank and used later in the night period to feed the lamp. This way, it is possible to remove the energy consumption from the mains and to significantly reduce the manpower, cost and assembly time of the lighting poles, since it is not necessary to install electrical feeding circuits, making theopening of ditches unnecessary.

Rotomoulding is a transformation process of polymers, like polyethylene (PE), polypropyle-ne (PP) or PVC.

It’s a thermic process, in which the polymers powder is filled into a mould, which is expo-sed to a biaxial movement and heated to a temperature which can go until 300ºC. The high temperature enables the fusion of the polymer, while the biaxial movement enables the distribution of the material throughout the surface of the mould. After the pre-defined moulding cycle time, the heating is stopped and the cooling cycle starts to harden the polymer and enable a secure demoulding process. During the cooling cycle the biaxial movement is maintained, while the cooling is done by pressured air.



Documents

Larus Catalog EN