Upload
nicholas-flack
View
222
Download
2
Tags:
Embed Size (px)
Citation preview
Laptop/PC GPRS Configuration for Windows XP
Ways of Connecting your laptop
1.Using Bluetooth2.Using data cable3.Using infrared link
Before starting…
1.Subscription to GPRS is a prerequisite
2. Confirm that the handset supports IR reception and same is available on your laptop
3.In case of connecting through data cable, make sure the data cable is attached and the mobile is detected by the computer
Laptop settings • Click on to my computer and then control
panel
Click here
In printer and hardware option• Click on to phone and modem setting
Click on phone & modem
Phone and modem tab• In the modem tab select standard
modem over IR link
Phone and modem option• Click on to dialing rules tab in the
phone and modem option
• Press edit button
Edit button
Edit location• In the edit location window, click on to the general tab• Select tone option• Press ok
Select tone
Phone and modem tab• Click on the modem properties
Click on to properties
Modem properties• Select maximum port speed
Modem propertiesClick on to the advance tab and enter the extra initialization commands:NOTE: Please do not copy paste the mentioned string, Only manual typing is required.
If your system is not being supported the above string then type the following string.
For Post Paid
AT+CGDCONT=1,"IP",“ufone.internet”
For Pre Paid
AT+CGDCONT=1,"IP",“ufone.pinternet”
For U-Mail Account
AT+CGDCONT=1,"IP",“umail.internet”
For Post Paid
AT+CGDCONT=1,"IP",“ufone.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31For Pre Paid
AT+CGDCONT=1,"IP",“ufone.pinternet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31For U-Mail Account
AT+CGDCONT=1,"IP",“umail.internet”;+CGQREQ=1,3,4,3,2,31;+CGQMIN=1,3,4,3,2,31
Modem properties• Confirm the correct initialization string,
in order to avoid any errors while connecting
• Click on to the advance port settings
Click here
• In the advance port settings uncheck the use FIFO buffers
• Select the com number currently in use • Press ok button
COM in use
• Click on to change default preferences button• Select port speed to maximum • Select hard ware flow control to none• Press ok and exit modem properties
Max port speed
Flow control to none
Setting up a new dial up connection
• Go to my computer control panel • Click on to network and internet connection
Click here
Click here
• Click on to network connection
• Click on to create a new connection
Click here
• Click on to the next button on the new connection wizard
Click next
• Select connect to the internet option • Press next button
• Select “set up my connection manually”• Press next button
Select
Press next
• Select “connect using a dial up connection”
• Press next
select
Press next
• Enter Ufone as ISP name• Press next
Enter Ufone
Press next
• Enter *99***1# in the phone number field• Press next
• Uncheck the options and leave the fields blank• Press next
• Press next button to finish to complete the connection wizard