Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
R E P R O C E S S E D S U R G I C A L D E V I C E S
Product Summary:
Product Availability: Reprocessed laparoscopic devices are distributed to
customers in case quantities similar to those of the original manufacturers,
and packaged in chipboard dispenser boxes in quantities of six. Reprocessed
suture passers are packaged in chipboard dispenser boxes in quantities of
five and include three components: suture passer, 5mm suture passer guide
and 12mm suture passer guide.
Decontamination and Cleaning: Once insulation is removed, laparoscopic
devices are rinsed, soaked, brushed, and sonicated in enzymatic detergent
to remove contaminants. Inner lumens of devices are flushed with cleaning
solution. Tips on devices with electro-cautery properties are pressure
washed to restore original appearance.
Suture passers are rinsed, soaked, brushed, and sonicated in enzymatic
detergent to remove contaminants. Inner lumens of devices are flushed
with cleaning solution.
Includes models originally manufactured by Ethicon Endo-Surgery and Covidien
Used in laparoscopic general, gynecological, urological and bariatric surgery
LAPAROSCOPIC SURGICAL DEVICES
Laparoscopic devices are disassembled prior to cleaning
sustainability.stryker.com • 888.888.3433
PRODUCT INFORMATION
PERFORMANCE TESTING
SHARPENING
PACKAGING
Performance Testing: All reprocessed laparoscopic devices are tested for
smooth shearing action. New insulation is applied to laparoscopic devices
with electro-cautery properties. Devices with electro-cautery properties
are subjected to dielectric strength testing to ensure integrity of the
insulation. Plungers of reprocessed suture passers are actuated to confirm
smoothness of the action.
Visual Inspection and Sharpening: After a unique identification bar code
is applied, all devices are visually inspected under magnification for
scratches, cracks and any other damage. Laparoscopic scissors are
sharpened and realigned using proprietary equipment.
Packaging: Reprocessed laparoscopic devices are protected in rigid plastic
trays with Tyvek® lids, and sealed with validated equipment.
Sterilization: Ethylene oxide sterilization is validated as per ANSI/AAMI/
ISO 11135 to a sterility assurance level of 10-6. Ethylene oxide residuals
do not exceed maximum allowable limits of ANSI/AAMI/ISO 10993-7.
Laparoscopic Devices
Suture Passers
$46,899
$12,764
2,144 lbs.
31 lbs.
Device Type Waste Diversion Estimate
*Savings estimates are based on best-demonstrated practices at a hospital with an average of 250 beds. A hospital’s true savings potential is not realized immediately; rather, savings may increase over time as reprocessing is continuously embraced by staff as a standard best practice.
The third-party trademarks used herein are trademarks of their respective owners.
MKT8004 REV B
Annual Savings Estimate*