Laboratory Exhaust Systems SKYPLUME G1-ELLV-SC · Laboratory Exhaust Systems SKYPLUME G1-ELLV-SC •236%-273% Induction Rates •Eleven sizes from 24 to 66 •Volumes up to 123100

Laboratory Exhaust Systems

SKYPLUME G1-ELLV-SC

• 236%-273% Induction Rates

• Eleven sizes from 24 to 66

• Volumes up to 123100 CFM per Fan

• Static pressures up to 17" W.G.

Plasticair

• Class l • Class ll • Class lll

SKYPLUME G1-EL Centrifugal Configuration

AMCA 260 Tested

SKYPLUME G1-ELLV-SC (Extended Lobe)

Fans incorporate a single-width centrifugal unit, conclusive with

Low velocity nozzle design and integral windband to maximize

dilution ratios. Plasticair has achieved certified induction ratios

between 236%-273%. This patented and improved design

maximizes plume height and dilution versus horsepower.

Standard versions of the SKYPLUME G1-EL

fans are offered by Plasticair which are categorized as

SKYPLUME G1-ELLV-SC, and meet ANSI Z9.5 requirements..

Both belt and direct drive units are available

in three (3) arrangements. Our construction is a hybrid of UV

stable FRP and Coated steel (Heresite 413-P), which provides

Excellent corrosion resistance and strength in mild to medium

corrosive environments. Every units standard design meets 125

MPH (201 km/h) wind load. 150 MPH (241 km/h) construction is

available upon request.

Standard Features• Impeller – B.I. Airfoil – coated steel or aluminum –

Heresite 413-P

• Housing – coated steel or aluminum – Heresite 413-P

• Induction Stack – UV stable FRP construction – Lifetime

Rust Proof

• Fan Base – coated steel or aluminum – Heresite 413-P

• System designed to withstand wind load of 200km/h (125

MPH)

• System meet requirement of ANSI Z9.5

• Shaft – 1045 carbon – shaft sleeve in airstream

• Shaft seal – Non-asbestos woven fibrous (ceramic felt)

• Lifting lugs

• Arrangement 9 – V-belt drive sets – 1.5 S.F.

• Arrangement 8 – Drive coupling

• Arrangement 4 – Direct couple

Wheel ConstructionSKYPLUME G1-ELLV-SC backward inclined Airfoil wheels are

Steel or Aluminum in construction and are coated with Heresite P-

413. All welding is continuous. The impellers are statically and

dynamically balanced to grade G6.3 and as per AMCA 204. Prior

to being assembled in the fan, followed by a quality check and

further final balance of the entire rotating assembly if required.

Plasticair Inc. certifies that theSKYPLUME-G1-ELLV-SC laboratoryexhaust models shown herein islicensed to bear the AMCASeal. The ratings shown are basedon tests and procedures performedin accordance with AMCAPublication 211 and AMCAPublication 311 and comply with therequirements of the AMCA CertifiedRatings Program

PATENT NUMBERS

Canada: 2365932 & 2456249

U.S.: 6676503 & 7241214

Alternate Drive Arrangements

Plenums are available in Rust-proof Construction – FRP, UV stable.• Dampers: constructed in Aluminum Epoxy Coated, Galvanized Steel, FRP, 316ss, 304ss,• Actuators• Other materials of construction available: 316ss, 304ss, Galvanized, Mild Steel Epoxy Coated• Single wall construction • Double wall constructionSpark Resistant Construction.• Outdoor NEMA 3R, 7, 9 disconnects.• Class 1 Division 1 Motors• Spark proof, AMCA –A, AMCA-B, AMCA-C

Factory Assembled Systems• Fans/plenums mounted on common base platform for single crane lift.• Platforms are rust proof FRP coated• Silencer Packages• Stainless steel silencers built into SKYPLUME G1-EL Stacks• Stainless steel Silencers built onto bypass dampers on intake plenum.• Self-supporting designs available up to 200 km/h (125 MPH) wind load.

Optional Features:

C

B

A

E D

SKYPLUME G1-ELLV

Shaft Guard

Belt Guard

Fan InletSteel Frame

Note:Dimension are not used for constucionCertified Drawing availabe upon request

SYSTEM SKYPLUME G1-ELLV-SCARRANGEMENT 9

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFPLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFPLASTICAIR INC. IS PROHIBITED.

5 4 3 2 1

C

B

A

D

E

VibrationIsolators

Belt Guard

Shaft GuardPlenum

SKYPLUME G1-ELLV

Access Door

PlenumInlet

Plenum Inlet Connection is Optional. Bottom/Top Plenum Inlet available upon request

Note:Dimension are not used for constucionCertified Drawing availabe upon request

SYSTEM SKYPLUME G1-ELLV-SCARRANGEMENT 9

PROPRIETARY AND CONFIDENTIALTHE INFORMATION CONTAINED IN THISDRAWING IS THE SOLE PROPERTY OFPLASTICAIR INC. ANY REPRODUCTION IN PART OR AS A WHOLEWITHOUT THE WRITTEN PERMISSION OFPLASTICAIR INC. IS PROHIBITED.

5 4 3 2 1

PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

7200 3039.3 1089 2.11 241.3 1169 1.74 240.6 1247 3.4 240.6 1315 4.05 237.5 1376 4.69 237.5 1434 5.34 237.5 1489 6.00 236.1 1544 6.7 236.1 1596 7.39 236.1 1646 8.08 236.1 1694 8.77 236.1

8250 3482.5 1201 2.74 241.3 1274 3.44 241.3 1344 4.17 240.6 1413 4.93 240.6 1475 5.68 237.5 1531 6.42 237.5 1583 7.15 237.5 1633 7.89 237.5 1682 8.63 236.1 1731 9.43 236.1 1778 10.22 236.1

9300 3925.7 - - - 1385 4.29 241.3 1447 5.08 241.3 1510 5.90 240.59 1572 6.76 240.6 1630 7.61 240.6 1682 8.46 237.5 1731 9.28 237.5 1777 10.11 237.5 1822 10.94 237.5 1865 11.77 237.5

10350 4368.9 - - - 1498 5.29 241.3 1557 6.16 241.3 1613 7.04 241.28 1669 7.95 240.6 1726 8.90 240.6 1779 9.85 240.6 1830 10.80 240.6 1876 11.73 237.5 1919 12.65 237.5 1962 13.58 237.5

11400 4812.2 - - - - - - 1670 7.42 241.3 1723 8.38 241.28 1774 9.34 241.3 1824 10.33 240.6 1876 11.38 240.6 1926 12.43 240.6 1973 13.49 240.6 2020 14.52 240.6 2061 15.54 237.5

12450 5255.4 - - - - - - 1784 8.85 241.3 1835 9.90 241.28 1884 10.95 241.3 1930 12.00 241.3 1975 13.06 240.6 2023 14.20 240.6 2070 15.35 240.6 2115 16.49 240.6 2158 17.63 240.6

13500 5698.6 - - - - - - - - - 1949 11.62 241.28 1995 12.76 241.3 2040 13.90 241.3 2083 15.04 241.3 2125 16.18 241.3 2168 17.39 240.6 2212 18.63 240.6 2255 19.87 240.6

14550 6141.8 - - - - - - - - - - - - 2109 14.78 241.3 2152 16.01 241.3 2193 17.24 241.3 2233 18.47 241.3 2272 19.70 241.3 2311 20.95 240.6 2353 22.28 240.5

15600 6585.1 - - - - - - - - - - - - - - - 2265 18.36 241.3 2305 19.67 241.3 2344 20.99 241.3 2382 22.31 241.3 2419 23.63 241.28 2454 24.94 241.28

16650 7028.3 - - - - - - - - - - - - - - - - - - 2419 22.35 241.3 2456 23.76 241.3 2493 25.17 241.3 2528 26.57 241.3 2563.1 27.98 241.28

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

7200 3039.3 1801 10.33 236.1 1907 11.96 236.1 2007 13.60 236.1 2111 15.48 248.6 2216 17.55 246.6 2317 19.61 246.6 2413 21.68 246.6 2506 23.77 272.8 2591 26.12 272.76 2674 28.46 272.56 2754 30.81 272.76

8250 3482.5 1867 11.80 236.1 1951 13.38 236.1 2045 15.18 236.1 2140 17.05 236.1 2229 18.93 236.1 2315 20.80 236.1 2407 22.99 246.6 2499 25.35 246.6 2589 27.72 246.64 2676 30.08 246.64 - - -

9300 3925.7 1952 13.52 236.1 2034 15.31 236.1 2113 17.09 236.1 2187 18.88 236.1 2268 20.83 236.1 2353 22.94 236.1 2436 25.05 236.1 2515 27.16 236.1 2591 29.27 236.07 2669 31.55 246.64 - - -

10350 4368.9 2043 15.43 237.5 2120 17.31 236.1 2197 19.29 236.1 2271 21.28 236.1 2341 23.29 236.1 2409 25.25 236.1 2474 27.24 236.1 2553 29.59 236.1 2629 31.94 236.07 2703 34.29 236.07 - - -

11400 4812.2 2140 17.58 237.5 2214 19.61 237.5 2286 21.65 237.53 2356 23.77 236.1 2426 25.96 236.1 2492 28.15 236.1 2557 30.34 236.1 2619 32.52 236.1 2680 34.71 236.11 2742 36.99 236.07 - - -

12450 5255.4 2239 19.89 237.5 2312 22.12 237.5 2382 24.34 237.53 2449 26.56 237.5 2513 28.79 237.5 2578 31.14 236.1 2642 33.53 236.1 - - - - - - - - - - - -

13500 5698.6 2336 22.35 240.6 2412 24.81 237.5 2480 27.22 237.53 2546 29.63 237.5 2609 32.04 237.5 - - - - - - - - - - - - - - - - - -

14550 6141.8 2432 24.95 240.6 2508 27.63 240.6 2580 30.30 237.53 2645 32.89 237.5 - - - - - - - - - - - - - - - - - - - - -

15600 6585.1 2530 27.76 240.6 2604 30.62 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - -

16650 7028.3 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

8750 3010.0 988 2.57 241.3 1061 3.33 240.6 1132 4.14 240.59 1194 4.93 237.5 1249 5.71 237.5 1301 6.49 237.5 1352 7.30 236.1 1401.4 8.14 236.1 1449 8.98 236.1 1494 9.82 236.1 1537 10.66 236.1

10100 3474.4 1097 3.39 241.3 1162 4.24 241.3 1225 5.13 240.59 1287 6.05 240.6 1344 6.98 237.5 1395 7.88 237.5 1442 8.78 237.5 1488 9.68 237.5 1531 10.59 237.5 1575 11.55 236.1 1618 12.52 236.1

11450 3938.8 - - - 1269 5.35 241.3 1325 6.32 241.28 1381 7.32 240.6 1437 8.37 240.6 1489 9.42 240.6 1537 10.46 237.5 1581 11.48 237.5 1623 12.51 237.5 1664 13.53 237.5 1703 14.55 237.5

12800 4403.2 - - - 1378 6.66 241.3 1431 7.74 241.28 1482 8.83 241.3 1531 9.94 240.6 1582 11.11 240.6 1630 12.29 240.6 1676 13.46 240.6 1719 14.62 237.5 1758 15.76 237.5 1796 16.91 237.5

14150 4867.6 - - - - - - 1540 9.40 241.28 1588 10.60 241.3 1633 11.79 241.3 1677 12.99 240.6 1724 14.29 240.6 1768 15.59 240.6 1811 16.89 240.6 1853 18.19 240.6 1892 19.47 237.5

15500 5332.0 - - - - - - - - - 1696 12.62 241.3 1739 13.93 241.3 1781 15.24 241.3 1821 16.55 241.3 1863 17.93 240.6 1905 19.36 240.6 1945 20.78 240.6 1984 22.20 240.6

16850 5796.4 - - - - - - - - - 1806 14.92 241.3 1847 16.34 241.3 1887 17.76 241.3 1926 19.19 241.3 1963 20.61 241.3 2000 22.05 240.6 2039 23.60 240.6 2077 25.15 240.6

18200 6260.7 - - - - - - - - - - - - 1956.9 19.05 241.28 1995 20.59 241.3 2032 22.13 241.3 2068 23.67 241.3 2103 25.20 241.3 2137 26.74 241.3 2172 28.35 240.6

19550 6725.1 - - - - - - - - - - - - - - - 2105 23.74 241.3 2140 25.40 241.3 2175 27.05 241.3 2209 28.70 241.3 2242 30.35 241.3 2274 32.00 241.3

20900 7189.5 - - - - - - - - - - - - - - - - - - 2250 29.01 241.3 2284 30.78 241.3 2316 32.51 241.3 2348 34.31 241.3 2379 36.07 241.3

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

8750 3010.0 1634 12.55 236.1 1731 14.54 236.1 1821 16.52 236.1 1916 18.81 246.6 2011 21.32 246.6 2102 23.83 246.6 2190 26.33 246.6 2274 28.87 272.8 2351 31.72 272.8 2426 34.58 272.8 2499.1 37.43 272.8

10100 3474.4 1699 14.46 236.1 1774 16.40 236.1 1858 18.55 236.1 1944 20.85 236.1 2025 23.14 236.1 2103 25.43 236.1 2184 27.99 246.6 2268 30.89 246.6 2349 33.78 246.6 2427 36.68 246.6 - - -

11450 3938.8 1781 16.68 236.1 1855 18.88 236.1 1926 21.08 236.1 1994 23.28 236.1 2062 25.56 236.1 2140 28.16 236.1 2214 30.76 236.1 2286 33.36 236.1 2356 35.95 236.1 2423 38.55 236.1 - - -

12800 4403.2 1869 19.19 237.5 1938 21.48 237.5 2008 23.93 236.1 2074 26.38 236.1 2138 28.84 236.1 2199 31.30 236.1 2258 33.75 236.1 2323 36.44 236.1 2392 39.35 236.1 - - - - - -

14150 4867.6 2963 22.00 237.5 2030 24.53 237.5 2095 27.05 237.5 2157 29.61 236.1 2220 32.33 236.1 2280 35.04 236.1 2338 37.76 236.1 2395 40.47 236.1 2449 43.19 236.1 - - - - - -

15500 5332.0 2059 25.04 237.5 2125 27.81 237.5 2188 30.58 237.5 2248 33.35 237.5 2306 36.11 237.5 2363 38.92 236.1 2420 41.90 236.1 - - - - - - - - - - - -

16850 5796.4 2151 28.24 240.6 2220 31.34 240.6 2283 34.36 237.5 2342 37.37 237.5 2399 40.38 237.5 - - - - - - - - - - - - - - - - - -

18200 6260.7 2244 31.69 240.6 2312 35.03 240.6 2377 38.37 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

19550 6725.1 2339 35.41 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

20900 7189.5 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:

Wheel Diameter = 24.50 inchesOutlet Area = 3.50 ft2

MAX Speed = 2806 RPM

Outlet Area = 4.25ft2

MAX Speed = 2546RPMWheel Diameter = 27.00 inches

6" T.P.5.0" T.P. 5.5" T.P.

6" T.P.

15" T.P. 16" T.P. 17" T.P.

2" T.P. 5.0" T.P.

15" T.P. 16" T.P.

14" T.P.

4. Performance Ratings do not include the effects of Crosswinds.

1. Perofrmance Installation Type D: Ducted Inlet and Ducted Outlet.

2. Power Rating (watts, kW, bhp) does not include transmission losses.

12" T.P.

17" T.P.

4.5" T.P.4" T.P.

Fan Efficiency Grade: FEG 80

4" T.P. 4.5" T.P.

5.5" T.P.3.5" T.P.

2" T.P. 3.5" T.P.1.0" T.P.

14" T.P.

1.5" T.P. 3" T.P.2.5" T.P.

13" T.P.

Nozzle Outlet Area = 2.369 ft2

SKYPLUME G1-ELLV-SC-24

Nozzle Outlet Area = 2.907ft2

1.0" T.P.

9" T.P.


7" T.P.

3" T.P.1.5" T.P.

7" T.P. 10" T.P.8" T.P. 9" T.P. 11" T.P.

2.5" T.P.

12" T.P.

10" T.P. 11" T.P.

3. Performance Ratings do not include the effects of appurtenances (accersories)

8" T.P. 13" T.P.


PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

10700 3013.2 884 3.12 241.3 950 4.05 240.6 1014 5.04 240.6 1069 6.00 237.5 1119 6.96 237.5 1166 7.91 237.5 1212 8.91 236.1 1257 9.94 236.1 1299 10.96 236.1 1340 11.99 236.1 1379 13.02 236.1

12350 3477.9 980 4.10 241.3 1039 5.14 241.3 1097 6.24 240.6 1153 7.37 240.6 1204 8.50 237.5 1249 9.60 237.5 1292 10.70 237.5 1333 11.81 237.5 1373 12.92 236.1 1412 14.11 236.1 1451 15.29 236.1

14000 3942.6 - - - 1134 6.48 241.3 1185 7.67 241.3 1236 8.90 240.6 1286 10.19 240.6 1334 11.47 240.6 1376 12.74 237.5 1416 13.99 237.5 1454 15.24 237.5 1491 16.49 237.5 1526 17.74 237.5

15650 4407.2 - - - 1231 8.07 241.3 1280 9.39 241.3 1325 10.71 241.3 1370 12.08 240.6 1416 13.52 240.6 1459 14.96 240.6 1501 16.39 240.6 1539 17.80 237.5 1574 19.20 237.5 1609 20.59 237.5

17300 4871.9 - - - - - - 1376 11.38 241.3 1419 12.85 241.3 1460 14.31 241.3 1500 15.79 240.6 1543 17.38 240.6 1583 18.97 240.6 1622 20.56 240.6 1659 22.15 240.6 1694 23.70 237.5

18950 5336.5 - - - - - - - - - 1515 15.28 241.3 1555 16.88 241.3 1592 18.49 241.3 1628 20.09 241.3 1667 21.80 240.6 1705 23.54 240.6 1741 25.28 240.6 1777 27.02 240.6

20600 5801.2 - - - - - - - - - 1613 18.05 241.3 1651 19.79 241.3 1687 21.53 241.3 1721 23.27 241.3 1755 25.01 241.3 1789 26.81 240.6 1825 28.70 240.6 1859 30.59 240.6

22250 6265.8 - - - - - - - - - - - - 1748 23.06 241.3 1783 24.94 241.3 1816 26.82 241.3 1849 28.70 241.3 1880 30.58 241.3 1911 32.46 241.3 1944 34.46 240.6

23900 6730.5 - - - - - - - - - - - - - - - 1880 28.74 241.3 1913 30.76 241.3 1944 32.78 241.3 1974 34.79 241.3 2004 36.81 241.3 2033 38.83 241.3

25550 7195.2 - - - - - - - - - - - - - - - - - - 2010 35.11 241.3 2040 37.27 241.3 2070 39.43 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

10700 3013.2 1469 15.38 236.1 1556 17.81 236.1 1637 20.24 236.1 1724 23.15 246.6 1810 26.21 246.6 1832 29.28 246.6 1971 32.35 246.6 2046 35.56 272.8 2116 39.05 272.8 2183 42.54 272.8 2249 46.03 272.8

12350 3477.9 1524 17.66 236.1 1592 20.03 236.1 1670 22.74 236.1 1747 25.54 236.1 1820 28.34 236.1 1890 31.14 236.1 1966 34.45 246.6 2041 37.99 246.6 2114 41.53 246.6 2185 45.07 246.6 - - -

14000 3942.6 1596 20.37 236.1 1664 23.06 236.1 1728 25.74 236.1 1789 28.43 236.1 1853 31.32 236.1 1923 34.50 236.1 1990 37.68 236.1 2055 40.85 236.1 2117 44.03 236.1 2180 47.35 246.6 - - -

15650 4407.2 1675 23.39 237.5 1737 26.21 236.1 1800 29.21 236.1 1860 32.21 236.1 1918 35.22 236.1 1973 38.22 236.1 2026 41.23 236.1 2088 44.66 236.1 2150 48.21 236.1 2210 51.76 236.1 - - -

17300 4871.9 1758 26.79 237.5 1819 29.88 237.5 1877 32.97 237.5 1934 36.15 236.1 1990 39.47 236.1 2045 42.79 236.1 2097 46.11 236.1 2148 49.43 236.1 2197 52.75 236.1 - - - - - -

18950 5336.5 1843 30.48 237.5 1903 33.86 237.5 1959 37.25 237.5 2014 40.63 237.5 2066 44.02 237.5 2118 47.51 236.1 2169 51.15 236.1 - - - - - - - - - - - -

20600 5801.2 1926 34.37 240.6 1988 38.1.5 237.5 2044 41.83 237.5 2097 45.51 237.5 2149 49.17 237.5 - - - - - - - - - - - - - - - - - -

22250 6265.8 2008 35.32 240.6 2070 42.63 240.6 2129 46.72 240.6 - - - - - - - - - - - - - - - - - - - - - - -

23900 6730.5 2093 43.05 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

25550 7195.2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

13200 3014.4 814 3.91 241.3 873 5.05 240.6 931 6.27 240.6 982 7.46 237.5 1027 8.64 237.5 1069 9.82 237.5 1110 11.03 236.1 1151 12.29 236.1 1190 13.56 236.1 1227 14.83 236.1 1262 16.09 236.1

15200 3471.1 902 5.13 241.3 956 6.42 241.3 1007 7.75 240.6 1058 9.14 240.6 1104 10.54 237.5 1145 11.89 237.5 1184 13.25 237.5 1221 14.61 237.5 1257 15.97 237.5 1293 17.41 236.1 1328 18.87 236.1

17200 3927.8 - - - 1042 8.08 241.3 1088 9.53 241.3 1134 11.03 240.6 1179 12.61 240.6 1222 14.19 240.6 1262 15.75 237.5 1297 17.29 237.5 1332 18.83 237.5 1365 20.36 237.5 1397 21.90 237.5

19200 4384.6 - - - 1131 10.04 241.3 1175 11.66 241.3 1216 13.28 241.3 1256 14.94 240.6 1297 16.70 240.6 1337 18.47 240.6 1374 20.23 240.6 1409 21.97 237.5 1442 23.68 237.5 1473 25.40 237.5

21200 4841.3 - - - - - - 1263 14.13 241.3 1302 15.92 241.3 1339 17.71 241.3 1374 19.50 240.6 1413 21.45 240.6 1449 23.39 240.6 1484 25.34 240.6 1518 27.29 240.6 1550 29.21 237.5

23200 5298.0 - - - - - - - - - 1390 18.92 241.3 1425 20.88 241.3 1459 22.84 241.3 1492 24.80 241.3 1526 26.87 240.6 1560 29.00 240.6 1593 31.13 240.6 1625 33.26 240.6

25200 5754.7 - - - - - - - - - 1479 22.34 241.3 1513 24.47 241.3 1545 26.59 241.3 1577 28.72 241.3 1607 30.85 241.3 1637 33.01 240.6 1669 35.32 240.6 1701 37.63 240.6

27200 6211.5 - - - - - - - - - - - - 1602 28.49 241.3 1633 30.79 241.3 1663 33.09 241.3 1693 35.38 241.3 1721 37.68 241.3 1749 39.98 241.3 1778 42.38 240.6

29200 6668.2 - - - - - - - - - - - - - - - 1722 35.46 241.3 1751 37.93 241.3 1779 40.39 241.3 1807 42.86 241.3 1834 45.33 241.3 1860 47.79 241.3

31200 7124.9 - - - - - - - - - - - - - - - - - - 1840 43.28 241.3 1867 45.91 241.3 1894 48.55 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

13200 3014.4 1339 18.89 236.1 1418 21.89 236.1 1492 24.88 236.1 1567 28.19 246.64 1645 31.97 246.6 1720 35.76 246.6 1791 39.54 246.6 1860 43.32 246.6 1924 47.52 272.8 1986 51.83 272.8 - - -

15200 3471.1 1394 21.78 236.1 1456 24.70 236.1 1522 27.88 236.0 1592 31.33 236.07 1659 34.77 236.1 1722 38.22 236.1 1786 41.91 246.6 1855 46.27 246.6 1922 50.62 246.6 1986 54.98 246.6 - - -

17200 3927.8 1460 25.08 236.1 1521 28.38 236.1 1579 31.69 236.1 1634 34.99 236.1 1688 38.35 236.1 1752 42.25 236.1 1813 46.15 236.1 1872 50.05 236.1 1929 53.96 236.1 1984 57.86 236.1 - - -

19200 4384.6 1532 28.83 237.5 1589 32.26 237.5 1645 35.91 236.1 1700 39.60 236.1 1752 43.28 236.1 1802 46.97 236.1 1850 50.65 236.1 1902 54.61 236.1 1958 58.97 236.1 - - - - - -

21200 4841.3 1608 33.00 237.5 1664 36.78 237.5 1716 40.57 237.5 1767 44.39 236.1 1818 48.46 236.1 1868 52.52 236.1 1915 56.59 236.1 1961 60.66 236.1 2006 64.73 236.1 - - - - -

23200 5298.0 1686 37.51 237.5 1740 41.66 237.5 1792 45.80 237.5 1841 49.94 237.5 1888 54.09 237.5 1935 58.28 236.1 1982 62.73 236.1 - - - - - - - - - - - -

25200 5754.7 1761 42.26 240.6 1818 46.89 240.6 1869 51.41 237.5 1917 55.91 237.5 1964 60.41 237.5 - - - - - - - - - - - - - - - - - -

27200 6211.5 1836 47.37 240.6 1892 52.37 240.6 1945 57.36 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

29200 6668.2 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

31200 7124.9 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:



Oulet Area = 5.26 ft2

MAX Speed = 2292 RPMWheel Diameter = 30.00 inches

Wheel Diameter = 33.00 inchesOutlet Area = 6.36 ft2


5.5" T.P. 6" T.P.


4.5" T.P.

15" T.P.


5.0" T.P. 6" T.P.

3.5" T.P.


5.0" T.P.

16" T.P. 17" T.P.

5.5" T.P.

15" T.P.


1.0" T.P. 2" T.P.

16" T.P.


8" T.P. 11" T.P.10" T.P.9" T.P.

2.5" T.P.

14" T.P.

13" T.P.12" T.P.

10" T.P. 11" T.P.

3" T.P.

7" T.P.

1.5" T.P.

13" T.P.8" T.P.

14" T.P.

3" T.P. 3.5" T.P. 4" T.P.1.0" T.P. 2" T.P.

7" T.P. 9" T.P. 12" T.P.


17" T.P.

4" T.P. 4.5" T.P.1.5" T.P. 2.5" T.P.



PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

16000 3043.6 731 4.70 241.3 785 6.09 240.6 838 7.56 240.6 883 9.01 237.5 924 10.44 237.5 963 11.87 237.5 1000 13.35 236.1 1037 14.88 236.1 1072 16.4 236.1 1105 17.95 236.1 1137 19.49 236.1

18400 3500.1 809 6.15 241.3 858 7.70 241.3 905 9.32 240.6 951 11.01 240.6 993 12.69 237.5 1030 14.34 237.5 1065 15.98 237.5 1099 17.62 237.5 1131 19.27 236.1 1164 21.04 236.1 1195 22.8 236.1

20800 3956.6 - - - 935 9.66 241.3 976 11.42 241.3 1018 13.26 240.6 1059 15.17 240.6 1098 17.08 240.6 1134 18.96 237.5 1166 20.81 237.5 1197 22.67 237.5 1228 24.53 237.5 1257 26.39 237.5

23200 4413.2 - - - 1013 11.98 241.3 1053 13.94 241.3 1090 15.90 241.3 1127 17.93 240.6 1165 20.06 240.6 1200 22.19 240.6 1235 24.32 240.6 1266 26.4 237.5 1295 28.47 237.5 1323 30.55 237.5

25600 4869.7 - - - - - - 1131 16.84 241.3 1166 19.00 241.3 1200 21.17 241.3 1233 23.37 240.6 1268 25.72 240.6 1301 28.07 240.6 1333 30.42 240.6 1364 32.77 240.6 1392 35.07 237.5

28000 5326.2 - - - - - - - - - 1244 22.54 241.3 1276 24.91 241.3 1307 27.27 241.3 1337 29.64 241.3 1369 32.18 240.6 1400 34.75 240.6 1430 37.32 240.6 1459 39.89 240.6

30400 5782.8 - - - - - - - - - 1323 26.56 241.3 1354 29.12 241.3 1383 31.69 241.3 1412 34.26 241.3 1440 36.83 241.3 1468 39..49 240.6 1497 42.28 240.6 1526 45.07 240.6

32800 6239.3 - - - - - - - - - - - - 1432 33.85 241.3 1461 36.62 241.3 1488 39.39 241.3 1515 42.17 241.3 1541 44.94 241.3 1566 47.71 241.3 1594 50.68 240.6

35200 6695.8 - - - - - - - - - - - - - - - 1540 42.11 241.3 1566 45.08 241.3 1592 48.06 241.3 1617 51.03 241.3 1642 54.00 241.3 1665 56.98 241.3

37600 7152.4 - - - - - - - - - - - - - - - - - - 1645 51.36 241.3 1670 54.54 241.3 1694 57.72 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

16000 3043.6 1209 22.95 236.1 1280 26.58 236.1 1347 30.21 236.1 1417 34.38 246.6 1488 38.97 246.6 1555 43.55 246.4 1620 48.14 246.6 1682 52.77 272.8 1739 58.0 272.8 1795 63.20 272.8 1849 68.42 272.76

18400 3500.1 1255 26.34 236.1 1312 29.87 236.1 1374 33.83 236.1 1437 38.00 236.1 1497 42.18 236.1 1555 46.35 236.1 1615 515.10 246.6 1678 56.38 246.6 1738 61.65 246.6 1796 66.93 246.6 - - -

20800 3956.6 1314 30.28 236.1 1369 34.27 236.1 1422 38.26 236.1 1472 42.25 236.1 1524 46.50 236.1 1581 51.22 236.1 1637 55.94 236.1 1690 60.66 236.1 1741 65.38 236.1 1791 70.17 246.6 - - -

23200 4413.2 1377 34.69 237.5 1429 38.86 236.1 1480 43.31 236.1 1530 47.77 236.1 1577 52.22 236.1 1622 56.67 236.1 1666 61.12 236.1 1716 66.18 236.1 1767 71.45 236.1 1817 76.71 236.1 - - -

25600 4869.7 1445 39.64 237.5 1495 44.22 237.5 1542 48.79 237.5 1589 53.49 236.1 1636 58.40 236.1 1680 63.31 236.1 1723 68.22 236.1 1765 73.14 236.1 1806 78.05 236.1 - - - - - -

28000 5326.2 1514 45.00 237.5 1562 50.00 237.5 1609 55.00 237.5 1654 60.00 237.5 1697 65.01 237.5 1740 70.18 236.1 1782 75.56 236.1 - - - - - - - - - - - -

30400 5782.8 1580 50.65 240.6 1632 56.22 237.5 1677 61.65 237.5 1721 67.09 237.5 1763 72.52 237.5 - - - - - - - - - - - - - - - - - -

32800 6239.3 1647 56.70 240.6 1697 62.72 240.6 1746 68.75 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

35200 6695.8 1715 63.22 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

37600 7152.4 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

19300 3018.9 660 5.63 241.3 709 7.32 240.6 757 9.09 240.6 798 10.83 237.5 935 12.55 237.5 870 14.28 237.5 904 16.08 236.1 937 17.93 236.1 969 19.78 236.1 1000 21.63 236.1 1029 23.49 236.1

22250 3480.4 731 7.40 241.3 775 9.28 241.3 818 11.24 240.6 860 13.28 240.6 898 15.31 237.5 931 17.30 237.5 963 19.29 237.5 994 21.27 237.5 1023 23.28 236.1 1053 25.42 236.1 1082 27.55 236.1

25200 3941.8 - - - 845 11.67 241.3 883 13.80 241.3 921 16.03 240.6 959 18.34 240.6 994 20.65 240.6 1026 22.93 237.5 1056 25.18 237.5 1084 27.43 237.5 1111 29.68 237.5 1138 31.93 237.5

28150 4403.3 - - - 917 14.50 241.3 953 16.88 241.3 987 19.25 241.3 1021 21.72 240.6 1055 24.31 240.6 1087 26.89 240.6 1118 29.48 240.6 1146 32.01 237.5 1173 34.52 237.5 1199 37.03 237.5

31100 4864.7 - - - - - - 1026 20.44 241.3 1057 23.07 241.3 1087 25.69 241.3 1117 28.37 240.6 1149 31.22 240.6 1179 34.08 240.6 1208 36.94 240.6 1236 39.79 240.6 1262 42.59 237.5

34050 5326.1 - - - - - - - - - 1128 27.42 241.3 1157 30.29 241.3 1185 33.17 241.3 1212 36.04 241.3 1241 39.14 240.6 1269 42.26 240.6 1297 45.39 240.6 1323 48.51 240.6

37000 5787.6 - - - - - - - - - 1200 32.35 241.3 1228 35.48 241.3 1255 38.60 241.3 1281 41.73 241.3 1306 44.85 241.3 1332 48.09 240.6 1358 51.48 240.6 1384 54.88 240.6

39950 6249.0 - - - - - - - - - - - - 1301 41.30 241.3 1326 44.67 241.3 1351 48.08 241.3 1376 51.42 241.3 1399 54.8 241.3 1422 58.17 241.3 1447 61.78 240.6

42900 6710.5 - - - - - - - - - - - - - - - 1399 51.44 241.3 1423 55.06 241.3 1446 58.68 241.3 1469 62.31 241.3 1491 65.93 241.3 1512 69.55 241.3

45850 7171.9 - - - - - - - - - - - - - - - - - - 1495 62.81 241.3 1517 66.68 241.3 1539 70.56 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

19300 3018.9 1095 27.73 236.1 1160 32.11 236.1 1221 36.49 236.1 1285 41.70 246.6 1349 47.23 246.6 1410 52.76 246.6 1469 58.29 246.6 1525 64.04 272.8 1577 70.33 272.8 1627 76.63 272.8 1676 82.92 272.8

22250 3480.4 1136 31.82 236.1 1187 36.09 236.1 1245 40.95 236.1 1302 46.00 236.1 1357 51.05 236.0 1409 56.10 236.1 1465 62.03 246.6 1521 68.41 246.6 1576 74.79 246.6 1629 81.17 246.6 - - -

25200 3941.8 1190 36.66 236.1 1240 41.50 236.1 1288 46.34 236.1 1333 51.17 236.1 1381 56.38 236.1 1433 62.10 236.1 1483 67.82 236.1 1532 73.54 236.1 1578 79.26 236.1 1625 85.24 246.6 - - -

28150 4403.3 1248 42.06 237.5 1295 47.13 236.1 1341 52.54 236.1 1386 57.94 236.1 1429 63.34 236.1 1470 68.74 236.1 1510 74.15 236.1 1556 80.34 236.1 1602 86.73 236.1 1647 93.12 236.1 - - -

31100 4864.7 1309 48.14 237.5 1355 53.70 237.5 1398 59.28 237.5 1440 64.97 236.1 1483 70.93 236.1 1523 76.90 236.1 1562 82.87 236.1 1600 88.84 236.1 1637 94.81 236.1 - - - - - -

34050 5326.1 1373 54.72 237.5 1417 60.80 237.5 1459 66.89 237.5 1500 72.97 237.5 1539 79.05 237.5 1578 85.35 236.1 1616 91.88 236.1 - - - - - - - - - - - -

37000 5787.6 1434 61.67 240.6 1480 68.46 237.5 1522 75.07 237.5 1561 81.68 237.5 1600 88.29 237.5 - - - - - - - - - - - - - - - - - -

39950 6249.0 1495 69.12 240.6 1541 76.45 240.6 1585 83.79 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

42900 6710.5 1557 77.14 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

45850 7171.9 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:




MAX Speed = 1884 RPMOA = 7.76 ft2

Wheel Diameter = 36.50 inches


13" T.P. 16" T.P. 17" T.P.15" T.P.

1.0" T.P. 4" T.P. 4.5" T.P.

14" T.P.7" T.P.

11" T.P. 12" T.P.7" T.P. 8" T.P. 9" T.P. 10" T.P. 14" T.P.

Fan Efficiency Grade: FEG 80Nozzle Outlet Area = 5.257 ft2

3.5" T.P.1.5" T.P. 2.5" T.P. 3" T.P.2" T.P.



10" T.P. 11" T.P.9" T.P.8" T.P.

2" T.P. 2.5" T.P. 3.5" T.P. 4.5" T.P.3" T.P.

13" T.P.

4" T.P.

12" T.P.

5.5" T.P. 6" T.P.

5.0" T.P. 5.5" T.P. 6" T.P.

15" T.P.


16" T.P.

5.0" T.P.

17" T.P.


1.0" T.P. 1.5" T.P.

OA = 9.42 ft2


PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

23500 3007.0 595 6.84 241.3 640 8.89 240.6 683 11.05 240.6 720 13.17 237.5 754 15.27 237.5 785 17.36 237.5 817 19.56 236.1 847 21.82 236.1 875 24.07 236.1 903 26.33 236.1 929 28.58 236.1

27100 3467.7 659 8.98 241.3 699 11.27 241.3 738 13.66 240.6 776 16.15 240.6 810 18.62 237.5 841 21.05 237.5 870 23.46 237.5 898 25.88 237.5 924 28.34 236.1 951 30.94 236.1 977 33.54 236.1

30700 3928.3 - - - 763 14.17 241.3 797 16.77 241.3 832 19.49 240.6 866 22.31 240.6 898 25.13 240.6 926 27.89 237.5 953 30.64 237.5 979 33.38 237.5 1004 36.12 237.5 1027 38.86 237.5

34300 4389.0 - - - 828 17.61 241.3 860 20.51 241.3 891 23.40 241.3 922 26.42 240.6 952 29.57 240.6 982 32.72 240.6 1010 35.87 240.6 1035 38.94 237.5 1059 42.01 237.5 1083 45.07 237.5

37900 4849.6 - - - - - - 925 24.84 241.3 954 28.04 241.3 982 31.24 241.3 1009 34.51 240.6 1037 37.99 240.6 1065 41.47 240.6 1091 44.95 240.6 1116 48.43 240.6 1139 51.83 237.5

41500 5310.3 - - - - - - - - - 1018 33.32 241.3 1045 36.83 241.3 1070 40.33 241.3 1094 43.84 241.3 1121 47.62 240.6 1146 51.43 240.6 1171 55.24 240.6 1195 59.05 240.6

45100 5771.0 - - - - - - - - - 1083 39.32 241.3 1109 43.13 241.3 1133 46.94 241.3 1157 50.75 241.3 1179 54.56 241.3 1203 58.52 240.6 1227 62.66 240.6 1250 66.8 240.6

48700 6231.6 - - - - - - - - - - - - 1174 50.21 241.3 1197 54.32 241.3 1220 58.43 241.3 1242 62.55 241.3 1263 66.66 241.3 1284 70.78 241.3 1306 75.2 240.6

52300 6692.3 - - - - - - - - - - - - - - - 1262 62.54 241.3 1284 66.96 241.3 1305 71.37 241.3 1326 75.79 241.3 1346 80.21 241.3 1366 84.63 241.3

55900 7152.9 - - - - - - - - - - - - - - - - - - 1349 76.38 241.3 1370 81.10 241.3 1390 85.82 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

23500 3007.0 990 33.79 236.1 1049 39.12 236.1 1104 44.46 236.1 1163 50.90 246.6 1220 57.63 246.6 1276 64.37 246.6 1329 71.11 246.6 1379 78.20 272.8 1426 85.87 272.8 1472 93.53 272.8 1516 101.19 272.8

27100 3467.7 1026 38.74 236.1 1073 43.95 236.1 1125 49.92 236.1 1177 56.07 236.1 1227 62.22 236.1 1274 68.37 236.1 1325 75.73 246.6 1376 83.50 246.6 1426 91.27 246.6 1473 99.04 246.6 - - -

30700 3928.3 1075 44.64 236.1 1120 50.53 236.1 1163 56.43 236.1 1204 62.32 236.1 1249 68.74 236.1 1296 75.71 236.1 1341 82.67 236.1 1385 89.64 236.1 1427 96.61 236.1 1470 104.09 246.6 - - -

34300 4389.0 1127 51.20 237.5 1169 57.40 236.1 1212 63.99 236.1 1252 70.57 236.1 1291 77.15 236.1 1328 83.73 236.1 1364 90.32 236.1 1407 97.96 236.1 1449 105.75 236.1 1489 113.53 236.1 - - -

37900 4849.6 1183 58.60 237.5 1224 65.37 237.5 1263 72.14 237.5 1301 79.13 236.1 1339 86.41 236.1 1376 93.68 236.1 1412 100.95 236.1 1446 108.23 236.1 - - - - - - - - -

41500 5310.3 1240 66.61 237.5 1280 74.02 237.5 1318 81.44 237.5 1355 88.85 237.5 1390 96.26 237.5 1425 103.97 236.1 1460 111.94 236.1 - - - - - - - - - - - -

45100 5771.0 1295 75.08 240.6 1337 83.34 237.5 1374 91.40 237.5 1410 99.45 237.5 1445 107.51 237.5 - - - - - - - - - - - - - - - - - -

48700 6231.6 1350 84.14 240.6 1391 93.08 240.6 1431 102.02 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

52300 6692.3 1406 93.91 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

55900 7152.9 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

28500 3007.9 540 8.29 241.3 581 10.79 240.6 620 13.40 240.6 654 15.97 237.5 685 18.52 237.5 713 21.06 237.5 742 23.73 236.1 769 26.46 236.1 795 29.20 236.1 820 31.93 236.1 844 34.67 236.1

32850 3467.0 599 10.88 241.3 635 13.65 241.3 670 16.56 240.6 705 19.58 240.6 736 22.57 237.5 764 25.50 237.5 790 28.44 237.5 815 31.37 237.5 839 34.36 236.1 864 37.51 236.1 887 40.66 236.1

37200 3926.1 - - - 692 17.17 241.3 724 20.31 241.3 755 23.61 240.6 786 27.02 240.6 815 30.44 240.6 841 33.79 237.5 865 37.11 237.5 889 40.44 237.5 911 43.76 237.5 933 47.08 237.5

41550 4385.2 - - - 751 21.31 241.3 781 24.82 241.3 809 28.33 241.3 836 31.99 240.6 865 35.80 240.6 891 39.62 240.6 917 43.43 240.6 940 47.16 237.5 962 50.87 237.5 983 54.58 237.5

45900 4844.3 - - - - - - 839 30.05 241.3 866 33.92 241.3 891 37.80 241.3 916 41.77 240.6 941 45.98 240.6 966 50.20 240.6 990 54.41 240.6 1013 58.62 240.6 1034 62.74 237.5

50250 5303.4 - - - - - - - - - 924 40.30 241.3 948 44.54 241.3 971 48.79 241.3 993 53.03 241.3 1017 57.62 240.6 1040 62.23 240.6 1063 66.85 240.6 1084 71.46 240.6

54600 5762.5 - - - - - - - - - 983 47.53 241.3 1006 52.14 241.3 1028 56.75 241.3 1049 61.37 241.3 1070 58.50 241.3 1091 70.78 240.6 1113 75.79 240.6 1134 80.81 240.6

58950 6221.6 - - - - - - - - - - - - 1065 60.67 241.3 1086 65.65 241.3 1107 70.63 241.3 1127 75.91 241.3 1146 80.59 241.3 1165 85.57 241.3 1185 90.94 240.6

63300 6680.7 - - - - - - - - - - - - - - - 1145 75.56 241.3 1165 80.90 241.3 1184 86.25 241.3 1203 91.6 241.3 1221 96.95 241.3 1239 102.29 241.3

67650 7139.8 - - - - - - - - - - - - - - - - - - 1224 92.26 241.3 1242 97.97 241.3 1260 103.69 241.3 1278 109.4 241.3 - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

28500 3007.9 899 40.98 236.1 952 47.44 236.1 1002 53.91 236.1 1056 61.72 246.6 1108 69.89 246.6 1159 78.08 246.6 1207 86.22 246.6 1252 94.83 272.8 1295 104.12 272.8 1337 113.41 272.8 1377 122.71 272.8

32850 3467.0 932 46.96 236.1 974 53.27 236.1 1022 60.51 236.1 1069 67.97 236.1 1114 75.42 236.1 1157 82.88 236.1 1204 91.82 246.6 1250 101.24 246.6 1295 110.65 246.6 1338 120.07 246.6 - - -

37200 3926.1 976 54.09 236.1 1017 61.23 236.1 1056 68.37 236.1 1094 75.51 236.1 1134 83.31 236.1 1177 91.75 236.1 1218 100.19 236.1 1257 108.63 236.1 1296 117.07 236.1 1335 126.18 246.6 - - -

41550 4385.2 1023 62.00 237.5 1062 69.53 236.1 1100 77.50 236.1 1137 85.47 236.1 1172 76.90 236.1 1206 101.42 236.1 1238 109.39 236.1 1277 118.69 236.1 1315 128.12 236.1 1352 137.55 236.1 - - -

45900 4844.3 1073 70.94 237.5 1111 79.14 237.5 1146 87.32 237.5 1181 95.82 236.1 1216 104.63 236.1 1249 113.43 236.1 1281 122.24 236.1 1313 131.05 236.1 1343 139.86 236.1 - - - - - -

50250 5303.4 1125 80.61 237.5 1161 89.58 237.5 1196 98.56 237.5 1230 107.54 237.5 1262 116.51 237.5 1294 125.87 236.1 1325 135.51 236.1 - - - - - - - - - - - -

54600 5762.5 1175 90.83 240.6 1213 100.83 237.5 1247 110.58 237.5 1280 120.33 237.5 1311 130.09 237.5 - - - - - - - - - - - - - - - - - -

58950 6221.6 1225 101.76 240.6 1263 112.59 240.6 1299 123.41 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

63300 6680.7 1276 113.54 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

67650 7139.8 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:




1.0" T.P. 1.5" T.P. 2" T.P. 2.5" T.P. 3" T.P. 3.5" T.P.

14" T.P. 15" T.P. 16" T.P. 17" T.P.

4" T.P. 4.5" T.P. 5.0" T.P. 5.5" T.P. 6" T.P.


7" T.P.

2" T.P. 2.5" T.P. 3" T.P. 3.5" T.P.

8" T.P. 9" T.P. 10" T.P. 11" T.P.



4" T.P. 4.5" T.P. 5.0" T.P.

Fan Efficiency Grade: FEG 801.5" T.P.1.0" T.P. 5.5" T.P. 6" T.P.

8" T.P. 9" T.P. 10" T.P. 11" T.P. 12" T.P. 13" T.P. 14" T.P. 15" T.P. 16" T.P. 17" T.P.7" T.P.


OA = 11.52 ft2

Wheel Diameter = 44.50 inches MAX Speed = 1545 RPM

OA = 13.93 ft2

Wheel Diameter = 49.00 inches MAX Speed = 1403 RPM



12" T.P. 13" T.P.

PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

34900 3004.7 488 10.15 241.3 525 13.20 240.6 560 16.41 240.6 590 19.55 237.5 618 22.67 237.5 644 25.78 237.5 670 29.05 236.1 694 32.40 236.1 718 35.75 236.1 740 39.10 236.1 762 42.45 236.1

40300 3469.7 541 13.36 241.3 574 16.76 241.3 606 20.33 240.6 637 24.03 240.6 665 27.70 237.5 690 31.30 237.5 714 34.90 237.5 736 74.00 237.5 758 42.15 236.1 780 46.02 236.1 802 49.89 236.1

45700 3934.6 - - - 626 21.13 241.3 655 24.99 241.3 683 29.04 240.6 711 33.23 240.6 737 37.43 240.6 760 41.55 237.5 782 45.63 237.5 804 49.72 237.5 824 53.80 237.5 843 57.88 237.5

51100 4399.5 - - - 680 26.30 241.3 707 30.62 241.3 732 34.93 241.3 757 39.42 240.6 782 44.11 240.6 806 48.80 240.6 830 53.49 240.6 850 58.08 237.5 870 62.64 237.5 889 67.21 237.5

56500 4864.4 - - - - - - 760 37.14 241.3 784 41.91 241.3 807 46.68 241.3 829 51.54 240.6 852 56.73 240.6 875 61.92 240.6 896 67.10 240.6 917 72.29 240.6 936 77.37 237.5

61900 5329.3 - - - - - - - - - 837 49.87 241.3 859 55.10 241.3 880 60.33 241.3 900 65.56 241.3 921 71.18 240.6 942 76.86 240.6 962 82.54 240.6 982 88.22 240.6

67300 5794.2 - - - - - - - - - 891 58.92 241.3 912 64.61 241.3 932 70.29 241.3 951 75.98 241.3 970 81.66 241.3 989 87.53 240.6 1009 93.71 240.6 1028 99.89 240.6

72700 6259.1 - - - - - - - - - - - - 966 75.29 241.3 985 81.43 241.3 1004 87.57 241.3 1022 93.71 241.3 1039 99.85 241.3 1056 105.99 241.3 1074 112.54 240.6

78100 6724.1 - - - - - - - - - - - - - - 1039 93.84 241.3 1057 100.44 241.3 1074 107.40 241.3 1091 113.63 241.3 1107 120.23 241.3 1124 126.83 241.3

83500 7189.0 - - - - - - - - - - - - - - - - - 1111 114.67 241.3 1128 121.73 241.3 1144 128.78 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

34900 3004.7 812 50.19 236.1 860 58.11 236.1 905 66.03 236.1 954 75.62 246.6 1001 85.63 246.6 1047 95.63 246.6 1090 105.63 246.6 1131 116.20 272.8 1170 127.58 272.8 1207 138.97 272.8 1243.4 150.35 272.8

40300 3469.7 842 57.62 236.1 880 65.35 236.1 923 74.22 236.1 966 83.37 236.1 1006 92.51 236.1 1045 101.66 236.1 1087 112.58 246.6 1129 124.13 246.6 1169 135.68 246.6 1208 147.24 246.6

45700 3934.6 882 66.47 236.1 920 75.24 236.1 955 84.01 236.1 989 92.78 236.1 1024 102.29 236.1 1063 112.66 236.1 1100 123.03 236.1 1136 133.40 236.1 1171 143.77 236.1 1205 154.77 246.6

51100 4399.5 926 76.34 237.5 960 85.55 236.1 995 95.36 236.1 1028 105.17 236.1 1060 114.97 236.1 1090 124.78 236.1 1120 134.59 236.1 1154 145.87 236.1 1189 157.46 236.1 1222 169.06 236.1

56500 4864.4 972 87.46 237.5 1005 97.56 237.5 1037 107.65 237.5 1069 118.03 236.1 1100 128.87 236.1 1130 139.71 236.1 1159 150.55 236.1 1187 161.40 236.1 1215 172.24 236.1

61900 5329.3 1019 99.51 237.5 1052 110.55 237.5 1083 121.63 237.5 1113 132.68 237.5 1142 143.74 237.5 1171 155.17 236.1 1199 167.05 236.1

67300 5794.2 1064 112.24 240.6 1099 124.59 237.5 1130 136.61 237.5 1159 148.64 237.5 1188 160.66 237.5

72700 6259.1 1110 125.89 240.6 1144 139.24 240.6 1177 152.59 240.6

78100 6724.1 1157 140.61 240.6

83500 7189.0

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

42700 3005.6 441 12.42 241.3 474 16.15 240.6 506 20.07 240.6 534 23.92 237.5 559 27.73 237.5 559 27.73 237.5 606 35.55 236.1 628 39.64 236.1 649 43.74 236.1 670 47.84 236.1 689 51.94 236.1

49300 3470.1 489 16.34 241.3 519 20.51 241.3 548 24.87 240.6 576 29.39 240.6 601 33.89 237.5 601 33.89 237.5 645 42.69 237.5 666 47.10 237.5 686 51.57 236.1 706 56.30 236.1 725 61.03 236.1

55900 3934.7 - - - 566 25.85 241.3 592 30.57 241.3 617 35.52 240.6 643 40.65 240.6 643 40.65 240.6 688 50.83 237.5 707 55.82 237.5 727 60.81 237.5 745 65.80 237.5 763 70.8 237.5

62500 4399.2 - - - 615 32.16 241.3 639 37.44 241.3 662 42.72 241.3 684 48.21 240.6 684 48.21 240.6 729 59.68 240.6 750 65.42 240.6 769 71.03 237.5 787 76.62 237.5 804 82.2 237.5

69100 4863.8 - - - - - - 687 45.41 241.3 709 51.25 241.3 729 57.08 241.3 729 57.08 241.3 771 69.37 240.6 791 75.72 240.6 810 82.06 240.6 829 88.4 240.6 846 94.62 237.5

75700 5328.4 - - - - - - - - - 757 60.98 241.3 777 67.37 241.3 777 67.37 241.3 813 80.16 241.3 833 87.03 240.6 852 93.98 240.6 870 100.93 240.6 888 107.88 240.6

82300 5792.9 - - - - - - - - - - - - 825 78.99 241.3 825 78.99 241.3 860 92.89 241.3 877 99.84 241.3 894 107.02 240.6 912 114.58 240.6 935 124.17 240.6

88900 6257.5 - - - - - - - - - - - - 873 92.04 241.3 873 92.04 241.3 907 107.06 241.3 924 114.57 241.3 939 122.08 241.3 955 129.58 241.3 971 137.59 240.6

95500 6722.0 - - - - - - - - - - - - - - - - - - 956 122.78 241.3 971 130.84 241.3 986 138.91 241.3 1001 146.98 241.3 1016 155.04 241.3

102100 7186.6 - - - - - - - - - - - - - - - - - - 1004 140.16 241.3 1019 148.79 241.3 1034 157.41 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

42700 3005.6 734 61.40 236.1 778 71.09 236.1 818 80.78 236.1 862 92.51 246.6 905 104.75 246.6 946 116.99 246.6 986 129.23 246.6 1023 142.15 272.8 1058 156.08 272.8 1092 170.00 272.8 1124 183.92 272.8

49300 3470.1 761 70.49 236.1 796 79.95 236.1 835 90.80 236.1 837 101.99 236.1 910 113.17 236.1 945 124.36 236.1 983 137.71 246.6 1021 151.85 246.6 1057 165.98 246.6 1093 180.11 246.6 - - -

55900 3934.7 798 81.31 236.1 831 92.03 236.1 863 102.76 236.1 894 113.49 236.1 926 125.12 236.1 961 137.81 236.1 995 150.49 236.1 1027 163.18 236.1 1058 175.86 236.1 1090 189.32 246.6 - - -

62500 4399.2 837 93.36 237.5 868 104.64 236.1 900 116.63 236.1 930 128.63 236.1 958 140.62 236.1 986 152.61 236.1 1012 164.61 236.1 1044 178.41 236.1 1075 192.60 236.1 1105 206.78 236.1 - - -

69100 4863.8 878 106.96 237.5 909 119.30 237.5 938 131.65 237.5 966 144.34 236.1 995 157.60 236.1 1022 170.86 236.1 1048 184.13 236.1 1073 197.39 236.1 1098 210.65 236.1 - - - - - -

75700 5328.4 921 121.68 237.5 951 135.21 237.5 979 148.73 237.5 1006 162.25 237.5 1033 175.77 237.5 1058 189.76 236.1 1084 204.28 236.1 - - - - - - - - - - - -

82300 5792.9 962 137.24 240.6 994 152.34 237.5 1021 167.04 237.5 1048 181.75 237.5 1074 196.45 237.5 - - - - - - - - - - - - - - - - - -

88900 6257.5 1004 153.92 240.6 1034 170.24 240.6 1064 186.56 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

95500 6722.0 1046 171.91 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

102100 7186.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:






Fan Efficiency Grade: FEG 801.0" T.P. 1.5" T.P. 2" T.P. 2.5" T.P. 3" T.P. 3.5" T.P. 5.5" T.P. 6" T.P.

15" T.P. 16" T.P. 17" T.P.14" T.P.11" T.P.

OA = 17.09 ft2

Wheel Diameter = 54.25 inches

4" T.P. 4.5" T.P. 5.0" T.P.

3" T.P. 3.5" T.P.

13" T.P.



7" T.P. 8" T.P. 9" T.P. 10" T.P.

Fan Efficiency Grade: FEG 801.0" T.P. 1.5" T.P. 4" T.P. 4.5" T.P. 5.0" T.P. 5.5" T.P. 6" T.P.2" T.P. 2.5" T.P.

15" T.P. 16" T.P. 17" T.P.7" T.P. 8" T.P. 9" T.P. 10" T.P. 11" T.P.


12" T.P.


OA = 20.86 ft2


13" T.P. 14" T.P.

12" T.P.

PERFORMANCE DATA

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

52000 3024.8 403 15.21 241.3 433 19.74 240.6 462 24.52 240.6 487 29.21 237.5 510 33.85 237.5 531 38.49 237.5 552 43.33 236.1 572 48.32 236.1 592 53.31 236.1 610 58.30 236.1 628 63.29 236.1

59900 3484.4 446 19.94 241.3 473 25.00 241.3 499 30.28 240.6 525 35.78 240.6 548 41.25 237.5 568 46.60 237.5 588 51.95 237.5 607 57.30 237.5 624 62.7 236.1 643 68.44 236.1 660 74.19 236.1

67800 3943.9 - - - 516 31.42 241.3 539 37.14 241.3 562 43.14 240.6 585 49.36 240.6 606 55.59 240.6 626 61.71 237.5 644 67.76 237.5 661 73.82 237.5 678 79.87 237.5 694 85.93 237.5

75700 4403.5 - - - 559 39.00 241.3 581 45.39 241.3 602 51.78 241.3 623 58.42 240.6 643 65.37 240.6 663 72.32 240.6 982 79.27 240.6 699 86.07 237.5 715 92.83 237.5 731 99.59 237.5

83600 4863.0 - - - - - - 625 54.93 241.3 644 61.99 241.3 663 69.06 241.3 681 76.25 240.6 701 83.95 240.6 719 91.60 240.6 737 99.27 240.6 754 106.95 240.6 769 114.47 237.5

91500 5322.6 - - - - - - - - - 688 73.63 241.3 705 81.36 241.3 723 89.09 241.3 739 96.82 241.3 757 105.13 240.6 774 113.53 240.6 790 121.93 240.6 807 130.33 240.6

99400 5782.1 - - - - - - - - - 732 86.84 241.3 749 95.23 241.3 765 103.63 241.3 781 112.03 241.3 796 120.42 241.3 812 129.12 240.6 828 138.24 240.6 844 147.37 240.6

107300 6241.6 - - - - - - - - - - - - 792 110.80 241.3 808 119.87 241.3 823 128.93 241.3 838 137.99 241.3 853 147.06 241.3 867 156.12 241.3 882 165.83 240.6

115200 6701.2 - - - - - - - - - - - - - - - 852 137.94 241.3 867 147.67 241.3 881 157.40 241.3 895 167.13 241.3 908 176.86 241.3 922 186.6 241.3

123100 7160.7 - - - - - - - - - - - - - - - - - - 911 168.38 241.3 924 178.78 241.3 938 189.18 241.3 - - - - - -

Fan

Inlet

CFM

Nozzle

outlet

velocity

FPM

RPM BHPE.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)RPM BHP

E.R.

(%)

52000 3024.8 668 74.68 236.1 708 86.48 236.1 745 98.28 236.1 784 112.19 246.6 823 127.09 246.6 860 142.00 246.6 896 156.91 246.6 930 172.28 272.8 962 189.24 272.8 992 206.19 272.8 1022.2 223.15 272.8

59900 3484.4 693 85.69 236.1 724 97.18 236.1 759 110.22 236.1 794 123.81 236.1 828 137.41 236.1 860 151.00 236.1 893 166.86 246.6 928 184.03 246.6 961 201.20 246.6 993 218.37 246.6 - - -

67800 3943.9 726 98.65 236.1 757 111.66 236.1 786 124.67 236.1 813 137.68 236.1 842 151.67 236.1 874 167.06 236.1 905 182.45 236.1 934 197.83 236.1 963 213.22 236.1 991 229.24 246.6 - - -

75700 4403.5 761 113.12 237.5 790 126.76 236.1 818 141.28 236.1 845 155.81 236.1 871 170.34 236.1 897 184.87 236.1 921 199.40 236.1 949 216.04 236.1 977 233.22 236.1 1005 250.4 236.1 - - -

83600 4863.0 671 76.46 236.1 826 144.33 237.5 853 159.27 237.5 878 174.63 236.1 904 190.67 236.1 929 206.72 236.1 953 222.76 236.1 976 238.80 236.1 998 254.85 236.1 - - - - - -

91500 5322.6 837 147.01 237.5 864 163.36 237.5 890 179.70 237.5 914 196.05 237.5 938 212.39 237.5 962 229.32 236.1 985 246.88 236.1 - - - - - - - - - - - -

99400 5782.1 874 165.62 240.6 902 183.84 237.5 928 201.60 237.5 952 219.35 237.5 975 237.11 237.5 - - - - - - - - - - - - - - - - - -

107300 6241.6 911 185.54 240.6 939 205.24 240.6 966 224.94 240.6 - - - - - - - - - - - - - - - - - - - - - - - -

115200 6701.2 949 207.00 240.6 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

123100 7160.7 - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -

Notes:





1.0" T.P. 1.5" T.P. 2" T.P. 2.5" T.P. 3" T.P. 3.5" T.P.

7" T.P. 8" T.P. 9" T.P. 10" T.P. 11" T.P. 12" T.P.

6" T.P.



13" T.P. 14" T.P. 15" T.P. 16" T.P. 17" T.P.

Fan Efficiency Grade: FEG 804" T.P. 4.5" T.P. 5.0" T.P. 5.5" T.P.

OA = 25.26 ft2


Plasticair Inc., Servicing Industry

FRP Fans Scrubbing Equipment Laboratory Fumehoods

Plasticair Product List Scrubbers: Horizontal Packed Bed - Single/Double (HS-Series)

Vertical Packed Bed Towers (VS-Series)

Odour Control Scrubbers (HCS, VCS-Series)

Demisters - Vane Type (P-Series)

Demisters - Mesh Type (M-Series)

Demisters - Multiple Stage Type (E-Series)

Venturi Scrubbers (ECE-Series)

Laboratory Fume Hood Scrubbers (FHS-Series)

Scrubber Applications: Oil/Air Separators

Chlorine Scrubbers

Micro Chip Manufacturing Scrubbers

Plating Plant Scrubbers

Pickling Line Scrubbers

Chromic Acid Scrubbers And Demisters

FRP Fans: Axial Fans - Vane / Tube

Panel Fans - Wall Mount / Box Mount

Inline Centrifugal - Backward Curved Laboratory

Fans - B.I. Utility Sets / B.I. Tubular High

Pressure Fans - Radial Blade

Medium Pressure Fans - Radial Blade

Medium Pressure Fans - Backward Curved

Mini Industrial Vent Sets - Radial Blade / B.I.

Plasticair’s Sales Forces are located in major

cities around the world.

Contact the factory for the agent closest to you.

Your Local Plasticair Representative is:

Bulletin # 133 February 2015

Plasticair Inc. 1275 CRESTLAWN DRIVE, MISSISSAUGA, ONTARIO, CANADA L4W 1A9 TEL: (905) 625-9164 F AX : (905) 625-0147

Email: [email protected] • Web Page: www.plasticair.com

mailto:[email protected]

http://www.plasticair.com/

Documents

Laboratory Exhaust Systems SKYPLUME G1-ELLV-SC · Laboratory Exhaust Systems SKYPLUME G1-ELLV-SC •236%-273% Induction Rates •Eleven sizes from 24 to 66 •Volumes up to 123100