Lab - Tools That Simplify Product Sizing and Selection · 2016-03-24 · Title: Lab - Tools That Simplify Product Sizing and Selection Author: Kathleen B. Mathews Created Date: 3/24/2016

Copyright © 2015 Rockwell Automation, Inc. All Rights Reserved.

PUBLIC

PUBLIC - 5058-CO900H

L08 - Tools That Simplify Product Sizing and SelectionUsing Integrated Architecture® Builder, Motion Analyzer (MA) and

ProposalWorks™

Copyright © 2015 Rockwell Automation, Inc. All Rights Reserved.PUBLIC

Agenda

Where to access the tools off the web

Lab Overview

Tool Overview


Agenda


Lab Overview

Tool Overview


How do you select automation products for your projects?


Specifying Control Systems is Complex

Over 350,000 standard products

Working with paper catalogs, selection

guides, and data sheets can be

cumbersome and inefficient

Desktop applications and Web-based

Tools provide the answer!

Partial Set of Rockwell Automation Product Catalogs and Data Sheets


Tools Working Together to Address Your Selection Assistance/Sizing Needs

Low

Get selection assistance on standard & configured products

Validate catalog numbers

Access product information

Estimate project costs

Create RFQs, Proposals, Reports

Cross-validate parts intended to work together as system

Validate systems componentsthat sit on same backplane

Validate network based on devices on it

Analyze, optimize & simulate solution against application requirements

High


To make life easier we have

Sizing and Selection tools simplify your life and save you money


Controller Selection

Guidance for controller selection based on function and cost while verifying

network performance


Servo Drive & Motor SS Selection

Guidance for drive and motor selection based on application requirements

(motion profile and mechanics). If you undersize, then you can never

achieve required speeds. If you oversize, then you paid too much!


Aux. component selection a and combined proposal

Guidance for component selection along with providing the complete

proposal


Agenda


Lab Overview

Tool Overview

Survey


Lab Format

12

Integrated Architecture® Builder

Used to select and size the controller and verify network performance

Motion Analyzer (MA)

Used to select and size the drives and motors

ProposalWorks™

Used to combine the results of Integrated Architecture Builder and MA and to

create the final report/proposal as well as select additional components &

documentation

75 minute lab with approximately 25 minutes devoted to each selection tool


Premise of the Lab

You are designing a shampoo bottle labeling line Bottles enter on the right and exit on

the left:

1. Entrance conveyor controlled

by PowerFlex® 525

2. Label applied by Kinetix®

5500

3. Label smoothed by Kinetix

5500

4. Exit conveyor controlled by

PowerFlex 525

Drives are controlled by a

CompactLogix™ controller and

everything communicates via

EtherNet/IP


Note on Pricing

Prices shown in the software are different from the pdf file.

Prices get updated in the software twice a year.

The last price change was not captured in the pdf file.


Agenda


Lab Overview

Tool Overview

Survey


Access the tools off the web

17

ProposalWorks and Integrated Architecture Builder can be downloaded

from

http://raiseinstall.rockwellautomation.com/pst-lite.html

Motion Analyzer is cloud based and is accessed at

https://motionanalyzer.rockwellautomation.com/

Download ProposalWorks™ and Integrated Architecture® Builder

http://raiseinstall.rockwellautomation.com/pst-lite.html


Have a question? Want to see the latest? See the show floor

18

ProposalWorks™ and Integrated Architecture® Builder are on the show floor

in Booth 927

Check out Integrated Architecture Builder’s EtherNet/IP Redesign and

ProposalWorks’ lifecycle data

Motion Analyzer is on the show floor in the Integrated Architecture Booth


Agenda


Lab Overview

Tool Overview

Documents

Lab - Tools That Simplify Product Sizing and Selection · 2016-03-24 · Title: Lab - Tools That Simplify Product Sizing and Selection Author: Kathleen B. Mathews Created Date: 3/24/2016