Lab jacks

With the partnership of Bochem Lab Supply

INDEX

LAB JACKS

1 www.geya99.com | e-mail : gea99@abv.bg | 9000 Varna , Pop Hariton No.47

tel./fax: 052/635278 | GSM: 0899/145781

Electrical lift LIFT 240

First electrical lab jack of compact design! More and more lab activities are performed in the hood. However, space conditions are often quite restricted there. This is the reason why the new electrical “Lift 240“ of BOCHEM comes with motor and control system integrated in the lab jack. Ensuring an absolutely stable stand and wobble-free lifting and lowering, it offers perfect safety. The extremely robust, highly precise scissor technology of 18/10 steel and the electronic components are durably protected using a bellows of chemically resistant PTFE. And since every hood is only really safe, if it remains closed, the lab jack is operated by a remote control! The design of the electrical “Lift 240“ is identical with that of the mechanical 240 x 240 mm BOCHEM lab jack. Both variants can be used and replaced, as desired, in existing structures. An end stop can be manually adjusted at the outside. Properties: Dimensions, retracted (LxWxH): 240 x 240 x 120 mm Max. height: 300 mm Workspace (LxW): 240 x 240 mm Weight: 6 kg Lifting speed: 480 mm/min Max. lifting of scissor: 180 mm Max. load capacity (dynamic): 25 kg Nominal torque: 8 Nm Degree of protection: IP 30 Supply voltage transformer: 100-240 VAC, 50/60 Hz Output: 12 V Battery remote control: 3 V, Lithiumzelle CR2430 Permissible ambient temperature: 5 - 45°C Noise emission: less than 40 dB (A) Material work space: 18/10 Stahl Material body: 18/10 Stahl Material corrugated bellows: PTFE

Material Article no.

18/10 Stainless 11220

LAB JACKS

2 www.geya99.com | e-mail : gea99@abv.bg | 9000 Varna , Pop Hariton No.47

tel./fax: 052/635278 | GSM: 0899/145781

Lab-Jacks, 18/10 stainless steel

For those who wish to reach the top New design and improved construction: - Improved scissor technology with reduced tolerances - Ergonomic knob, rounded and user friendly - Scissor-construction made of 18/10-stainless steel Properties: - All models are manufactured according to DIN 12897. - With the operating load we differ between the maximal dynamic operating load (Kg max. dyn.) and the maximal static operating load (Kg max. stat.) of the lab jack. These norms are also according to DIN 12897. - Smaller models up to 240x240mm (Typ 1) have a simple adjusting wheel, which can be operated by hand. - With the bigger models from 300x300mm on (Typ 2) we recommend the use of a ratchet, which connects with a special adjusting wheel. The ratchet is included.

Material A (Length) B

(Width) C

min C

max Kg max

dyn Kg max

stat Type

Article no.

18/10 Stainless

100 100 55 120 5 10 1 11115

18/10 Stainless

160 130 60 275 7 30 1 11120

18/10 Stainless

200 200 60 275 7 30 1 11130

18/10 Stainless

240 240 60 275 7 30 1 11140

18/10 Stainless

300 300 90 470 12 60 2 11180

18/10 Stainless

400 400 90 470 15 60 2 11190

Ratchet 190 11088

Lab-Jacks, 18/10 stainless steel

New design and improved construction: - Improved scissor technology with reduced tolerances - Ergonomic knob, rounded and user friendly - Scissor-construction made of 18/10-stainless steel

Material A (Length) B

(Width) C

min C

max Kg max

dyn Kg max

stat Type

Article no.

Al green 100 100 55 120 5 10 1 11015

Al green 160 130 60 275 7 30 1 11020

Al green 200 200 60 275 7 30 1 11030

Al green 240 240 60 275 7 30 1 11040

Al green 300 300 90 470 12 60 2 11080

Al green 400 400 90 470 15 60 2 11090

Ratchet 190 11088

LAB JACKS

3 www.geya99.com | e-mail : gea99@abv.bg | 9000 Varna , Pop Hariton No.47

tel./fax: 052/635278 | GSM: 0899/145781

Lab-Jacks, aluminium anodized

New design and improved construction: - Improved scissor technology with reduced tolerances - Ergonomic knob, rounded and user friendly - Scissor-construction made of 18/10-stainless steel Properties: - All models are manufactured according to DIN 12897. - With the operating load we differ between the maximal dynamic operating load (Kg max. dyn.) and the maximal static operating load (Kg max. stat.) of the lab jack. These norms are also according to DIN 12897. - Smaller models up to 240x240mm (Typ 1) have a simple adjusting wheel, which can be operated by hand. - With the bigger models from 300x300mm on (Typ 2) we recommend the use of a ratchet, which connects with a special adjusting wheel. The ratchet is included.

Material A

(Length) B

(Width) C

min C

max Kg max

dyn Kg max

stat Type

Article no.

Al anodized 100 100 55 120 5 10 1 11016

Al anodized 160 130 60 275 7 30 1 11021

Al anodized 200 200 60 275 7 30 1 11031

Al anodized 240 240 60 275 7 30 1 11041

Al anodized 300 300 90 470 12 60 2 11081

Al anodized 400 400 90 470 15 60 2 11091

Ratchet 190 11088

Lab-Jacks, aluminium anodized

for support jacks stainless steel & aluminium, type 2 (300 x 300 mm)

aterial A (Length) Article no.

18/10 Stainless 190 11088

LAB JACKS

4 www.geya99.com | e-mail : gea99@abv.bg | 9000 Varna , Pop Hariton No.47

tel./fax: 052/635278 | GSM: 0899/145781

Lab-Jacks MAXI 18/10 stainless steel

Properties: - The MAXI lab jacks offer 30% more height because of an amplified construction - Scissor-construction made of 18/10-stainless steel - Adjustment of height with the help of an adjusting wheel. - Ergonomic knob, rounded and user friendly - With the operating load we differ between the maximal dynamic operating load (Kg max. dyn.) and the maximal static operating load (Kg max. stat.) of the lab jack. These norms are also according to DIN 12897.

Material A

(Length) B

(Width) C

min C

max

Kg max dyn

Kg max stat

Article no.

Material

18/10 Stainless

160 130 75 400 7 30 11122 18/10

Stainless 18/10

Stainless 200 200 75 400 7 30 11132

18/10 Stainless

Lab-Jacks MAXI, aluminium

Properties: - The MAXI lab jacks offer 30% more height because of an amplified construction - Scissor-construction made of 18/10-stainless steel - Adjustment of height with the help of an adjusting wheel. - Ergonomic knob, rounded and user friendly - With the operating load we differ between the maximal dynamic operating load (Kg max. dyn.) and the maximal static operating load (Kg max. stat.) of the lab jack. These norms are also according to DIN 12897.

Material A

(Length) B

(Width) C

min C

max

Kg max dyn

Kg max stat

Article no.

Material

Al green 160 130 75 400 7 30 11022 Al green

Al green 200 200 75 400 7 30 11032 Al green

Palettes stainless steel

- 4 feet - 6 bars

Material A (Length) B (Width) C (Height) Kg max Article no. 18/10 Stainless 1200 800 150 1000 11114

LAB JACKS

5 www.geya99.com | e-mail : gea99@abv.bg | 9000 Varna , Pop Hariton No.47

tel./fax: 052/635278 | GSM: 0899/145781

Lift trucks, hydraulic

- With foot pump - 2 steering rolls - Brake Type 1: Standard Type 2: Table made in stainless steel

Material A

(Length) B

(Width) C

min C max Kg max Type

Article no.

Steel 800 500 280 900 300 1 11100 18/10 stainless steel 800 500 280 900 300 2 11105