Upload
lamthien
View
219
Download
0
Embed Size (px)
Citation preview
Clients ListË Ë
Ë Ë Ë
Ë Ë
Ë DG Vaishnav Ë Ë Mahatma Ë Ë ARLM Ë
Ravindra Bharathi Ë and many more...
Name in the
below list
as soon as posible
UrWe love to add
Ë Ë
Ë Ë Ë
Ë Ë
Ë DG Vaishnav Ë Ë Mahatma Ë Ë ARLM Ë
Ravindra Bharathi Ë and many more...
The tables are provided with Elec-trical Power Point for working with Instruments. The Power point can be position at the back of in power modules or with elevation mount Panels.
Instrument Tables
Tables can be designed to fit any dimension of Laboratory
We design, manufacture and install custom made laboratory furniture to suit a specific laboratory.
Our furniture are made up of GI sheet and CRCA tub-ing. Polyester epoxy powder coating on metal surfaces. Top of the tables and working surfaces are granite. As per customers’ requirements, we can give TRESPA TOPLAB or TRESPA ATHLON imported synthetic table top and work surface also.
The design of the work tables are made to fit in any kind and any shape of Laboratory to give maximum flexibility and utility.
The Tables are made of High Grade Eletro Galvanized Iron Sheet of 18 or 20 Swg, fin-ished in Epoxy Polyester Powder Coating finish with high quality granite work Tops. Option: Optional TRESPA TOPLAB or TRESPA ATHLON imported synthetic table top and work surface.
Work / Wall Table width are normally 750 mm or 900 mm with height of 750 mm. Options of with knee Hole and foot rest or Continuous Modules are available.
Work / Wall Tables
Anti Vibration tables are used with high sensitive instruments like Elec-tronic Balances, Microscopes & cali-bration Works. Limiting the vibrations generated from production areas, Natural Vibration from earth, Vibrations from moving objects on earth.
The tables can have sensitive area and service area or fully sensitive area depending on user requirement.
Constructed from Electro Galvanized Sheet finished with attractive Epoxy Powder Coating finish, with Anti Vibra-tion Pads and Mounts with foot level adjustment.
The Tables are made of High Grade Elec-tro Galvanized Steel Finished in Epoxy Polyester Powder Coating Finish with high quality Granite Tops fitted with imported PP Sink and Swan Neck Taps of Single way / Two way / Three way.
Anti Vibration Tables
Sink Unit
Single Sink or Twin Sink Model can be given
Type I : Suitable for Sensitive BalancesType II : Suitable for Larger Sensitive SystemsType III : Suitable for Heavy Duty Sensitive Systems & Calibration Works with Special mountings.
Laminar Air Flow Cabinet is a work cabinet suitable for ‘Product’ or ‘Work Area’ safe-ty. The work area is kept un-der ‘Class 100 / ISO 5’ clean environment for performing studies and test under clean work area. Flow Air is created by a Blower into the cabinet through Pre Filter & HEPA fil-ter and exhausted out through the front.
Types : Horizontal Model : Vertical Model : Table Top Model : Floor Standing Model
Work Top : Stainless Steel with Satin finish
Laminar Air Flow Cabinet Cabinet Material of Construction :
- Electro Galvanized Steel with Epoxy Powder Coating - Stainless Steel
Technical Specification :
- Cleanliness : Class 100 / ISO 5 - Partical Retentio : 0.3 micron - Air Velocity : 90fpm / 0.4572 m / sec +/- 20% - Standard : ISO 14644 -1 (Replaces US federal 209 E)
Options :
- Imported Magnetic Dial Pressure Gauge - Imported Air Flow Monitor - Low Air Flow Alarm - Filter Clogging Alarm - Microprocessor Control
Model No Working Area (L x D x H) mm
ML - V2 2’ x 2’ x 2’
ML - V3 3’ x 2’ x 2’
ML - V4 4’ x 2’ x 2’
ML - V4 6’ x 2’ x 2’
Ver
tical
Mod
el
Horizontal Model
Model No Working Area (L x D x H) mm
ML - H2 2’ x 2’ x 2’
ML - H3 3’ x 2’ x 2’
ML - H4 4’ x 2’ x 2’
ML - H4 6’ x 2’ x 2’
Biological Safety Cabinet are designed to protect personnel and the environment external to the cabinet while providing a suitable workspace for microbiological pro-cedures under partially safe conditions. It provides Personal safety, Product / Work Area Safety & Environment Safety.
Material of Construction :
- Electro Galvanized Steel with Epoxy Powder Coating - Stainless Steel
Technical Specifications :
- Cleanliness : Class 100 / ISO 5 - Particle Retention : 0.3 micron - Air Velocity : 90fdm / 0.4572 m / sec +/- 20% - Standard : ISO 14644 - 1 (Replaces US Fedral 209 E) - Blower : DIDW type system - Imported Magnetic Dial Pressure Gauge, - Power Point, Gas Intel nozzle, Level Jack - Microprocessor Control (option) - Imported Air Flow Monitor / Low Air Flow Alarm (Option)
Standard Working sizes : 3’ x 2’ x 2’ / 4’ x 2’ x 2’ / 6’ x 2’ x 2’
Bio Safety Cabinet
Class Exhaust Type Application
Class I100% Air is exhusted through
HEPA filter to outside or room.
Suitable for non-hazardous, low and
moderate risk agents
class II
Type A1
70% Air is Re-circulated and 30%
Air is Exhausted. +Ve pressure in
back Plenum.
Are not suitable for work with low
levels of vloatile toxic chemicals and
radio nuclide
class II
Type A2
70% Air is Re-circulated and 30%
Air is Exhausted. Blower at the
Top of cabinet with -Ve pressure
in back Plenum.
Are suitable for work with minute
quantities of volatie toxic chemicals
and trace amounts of radio nuclide
class II
Type B1
100% Air is exhausted out. Blow-
er at the Top of cabinet with -Ve
pressure in back Plenum.
Are suitable for work volatile toxic
chemicals and radio nuclide
class II
Type B2
100% Air exhausted out. Blower at the
Top of cabinet with -Ve pressure in back
Plenum.
Are Suitable for work with volatile tox-
ic chemicals and radio nuclide
class III
100% Air is exhausted out through
HEPA Filter. Blower is kept at the
Bottom / Top of cabinet with -Ve
pressure in work area & back ple-
num. Cabinets are enclosed and
are operated through Gloves with
mini pass box.
For work with BSL - 4 agents and
provides the highest degree of pro-
tection for the worker, Heavy duty
gloves that allow for manipulation of
materials inside are attached ports
in the cabinet.
For all laboratory Research work removal of toxic / corrosive fumes & gases becomes essential & critical. A Fume Hood offers a substantial degree of protection to the users. All air borne particles, Aerosols, Fumes / gases generated while performing various test are removed by ventilation hood by means of exhaust blowers positioned outside the room.
Fume Hoods
- Imported Air velocity Mon-
itoring Systems - Imported PP
Sink - Door / Sash open Alarm -
in-built Blower Model - Provision
for UV / IR lamp inside the cab-
inet - LPG / Gas valuves.
Other Optional
Features :
- Custom Built Canopy
Exhaust Hoods for open
area Fumes - ‘AAS’ / ICP
Exhaust Hood System
- Flexible Arm type
Exhaust system
Other types of Hoods :
A Wide range of High perfor-mance fume hoods are avail-ble with all options required to operate in different environ-ments like self exhaust, by-pass, Conventional Air Flow, Constant Velocity & Walk-in.
The Fume Hood flow standards laid down by OSHA / HRS / ANSI / ASHRAE / SEFA/ ACGIH
Options of separate Blower, Build-in Blower, Multi System Blowers are availble.
Fittings &Accessories
SS Safety Shower
With Eye Wash
3 Way Tap
Laboratory Shower
Spot Extractor
SS Peg Board with Pegs
Water Faucet
PP Sink With Outlet Nipple
Table top Eye Wash Fountain
Cupboards & Cabinets
Wall Cupboards
Wall mountable cupboards with Sliding Glass or Door type with or without Glass window. Adjustable partition shelf is provided.
Lab Storage Cupboards
All Storage Cupboards & Cabinets are made of Electro Galvanized Steel with Excellent Epoxy Powder Coating Finish.
Vertical Storage Cabinet with three ver-tical partitions with easy sliding. Each partition will have 6 horizontal shelves for storage of chemical bottles. Provid-ed with lock, SS handle and telescopic channels for easy handling.
Storage Cabinets
These Cabinets will have 4 or 5 partitions with slide in / Slide out type shutters or full Door type shutters with locks.
Model No Dimension LxDxH mm
MTL - VSC 900 x 600 x 800
Model No Dimension LxDxH mm
MTL - SCB 900 x 450 x 1800
MTL - SCV 900 x 400 x 1800
Model No Dimension LxDxH mm
MTL - WCS 900 x 300 x 600
MTL - WCD 900 x 300 x 600
Chennai - India.G3, VG Flats, #148, Pillayar Koil Street, Jafferkhanpet, Chennai - 600 083, India
Phone and E-mail Details :+91 44 24700248 / 43589748 +91 9791033312 / [email protected] www.metrolabs.biz
Bangalore - IndiaNo.4208, 21st Main , Subramanya nagar, Bangalore - 560 021 Karnataka, India
Phone and E-mail Details :080 23572176 / 23572177 +91 99000-45831 / [email protected]
Contact
Mr.Sam.N+91 [email protected]
[email protected]+919840931233
[email protected]+919791033313
www.metrolabs.biz