Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
AD
V#
05-1
06, P
P2.
5M-8
/08
Arkema Inc.2000 Market StreetPhiladelphia, PA 19103www.arkemagroup.com www.kynar500.com
THE ARCHITECT’S FIRST CHOICE. KYNAR 500Today, Kynar 500® PVDF resin-based metal coatings provide billions of square feet of protection against weathering, aging and
pollution on commercial, industrial, institutional and residential buildings around the globe. The capability of Kynar 500 resins to
deliver long-term durability is unparalleled in the industry. Introduced in 1965, Kynar 500 resin-based coatings were the original high
performance finishes for architectural metal. According to a recent survey, Kynar 500 finishes are still the architect’s first choice.*
®
Metal has rapidly become the material of choice for
exterior use due to its rugged durability, design versatility
and aesthetic possibilities. However, for all its bravado
and beauty, metal doesn’t necessarily have a tough skin
and is only available in a single color. To be both functional
and decorative, metal must be coated with a finish that
beautifies with color and doesn’t chalk, won’t lose its color
and sheen, and won’t pit, chip, or age before its time.
Architects around the world specify Kynar 500® PVDF
resin-based coatings to protect aluminum, galvanized steel
and aluminized steel. Other coating systems cannot
withstand the rigors of nature and time like those based
on Kynar 500 resins. This high-performance fluoropolymer
resin, with its extraordinary capability to retain color and
gloss, keeps painted metal looking vibrant and appealing.
Kynar 500 resin-based finishes are available worldwide
through a strict licensing program. This licensed distribution
ensures the quality, consistency and high performance of
Kynar 500 resin-based coatings.
P03
Kynar 500 resin-based coatings: vivid color, weatherability,
and maintenance-free reliability for all architectural metal.
WHY SPECIFY KYNAR 500?QUALITY, DURABILITY AND HIGH PERFORMANCE.
Architects are using metal in all kinds of new and bold ways.
Why? One reason is the high-performance chemistry behind
Kynar 500® PVDF resin-based finishes. This performance
can be used in many diverse applications, allowing architects
to design in colorful palettes without losing color and gloss.
Components, extrusions and preformed shapes can be bent,
crimped and twisted to maximize form and function in
defiance of blistering sun, humidity, urban grime, acid rain,
corrosive salt and abrasion.
P05
Metal forms and Kynar 500 resin-based coatings to
accommodate every culture, every taste, every design.
METAL UNBOUNDED.
PolyesterGreen
Kynar 500Green
SiliconePolyester
Bronze
Kynar 500Bronze
PolyesterPowderYellow
Kynar 500Yellow
AcrylicBronze
Kynar 500Bronze
PolyesterPowderOrange
HOW COATINGS FAIL.Most coatings break down under the effect of sun, rain and pollutants. Kynar 500 resists the chemical breakdown that
occurs as coatings age.
Kynar 500Red
10-YEAR EXPOSURE 15-YEAR EXPOSURE 17-YEAR EXPOSURE
Unexposed
Exposed
P07
OUTLASTS THE COMPETITION.These panels, exposed at an independent test-fence facility in Southern Florida, clearly demonstrate the outstanding
weatherability of Kynar 500® PVDF resin-based coatings over other finishes. Note the lack of fading with the panels
coated with Kynar 500 resin-based finishes.
Polyester Urethane
WHAT COLOR DO YOU WANT TO PAINT THE WORLD TODAY?
Color issues a statement, creates a mood and makes that desired
first impression quickly and more effectively than almost any other
architectural component. But color’s beauty can be fleeting. Sunlight, with
harsh ultraviolet rays, can quickly turn brown to tan, red to pink, or a deep blue
to sky blue. Kynar 500® PVDF resin is transparent to ultraviolet rays, and
when combined with durable pigments, creates a coating system that
resists color fade. Kynar 500 resin-based coatings are available in a rainbow
of textures, sheens and colors, including metallics and pearlescents.
P09
Be bold for years to come. Kynar 500 based
coatings come in bright, vivid, long-lasting colors.
P11
SUSTAINABLE BUILDING DESIGN – TAKING INTO ACCOUNT THEWHOLE BUILDING’S IMPACT ON THE ENVIRONMENT, ON THEOCCUPANTS, AND ON THE ECONOMIC ASPECT NOW AND IN THE FUTURE – IS AT THE CORNERSTONE OF THE BUILDING CONSTRUCTION INDUSTRY. MORE THAN HALF OF ALL ARCHITECTSAND DESIGNERS ARE CONSIDERING SUSTAINABILITY IN SOMEASPECT OF NEW BUILDING PROJECTS. THE USE OF A COOLKYNAR 500® RESIN-BASED PREPAINTED METAL ROOF CAN LOWER THE CARBON FOOTPRINT OF A BUILDING BY SIGNIFICANTLYREDUCING THE SOLAR HEAT GAIN INTO THE ATTIC OR LIVINGSPACE BELOW THE ROOF. THE COOL KYNAR 500 RESIN-BASEDPAINT SYSTEMS MAINTAIN THEIR COOL PROPERTIES FORDECADES BY RETAINING THE INITIAL SOLAR REFLECTANCE.– SCOTT KRINER, NOTED COOL ROOFING INDUSTRY EXPERT
GOING GREEN
As energy codes become more rigorous, smart builders are choosing cool
Kynar 500® based prepainted metal roofs to increase energy efficiency
and sustainability in their green designs. Cool metal roofs can reduce
cost for the building owner and decrease green house gas emissions
at the power plant. And with Kynar 500 PVDF’s advanced resistance to
UV degradation and over 70% solar reflectance, less heat is transferred
into the building, reducing ambient air temperatures to improve air quality
and limit the urban heat island effect.
Unlike conventional products, which are regularly damaged by UV energy,
heat and moisture, Kynar 500 PVDF resin-based coatings offer superior
long-term color retention, maintaining rich, vibrant hues over the lifetime
of a building. In addition, the architectural appeal, variety of profiles,
texture and color, flexibility and long-term durability make Kynar 500
resin-based painted metal roofs well suited for residential projects.
And with the decrease in required restoration and reconstruction, lower
amounts of VOCs are emitted into the atmosphere, further lessening the
overall environmental impact.
Kynar 500 PVDF technology now delivers Kynar Aquatec®, a new
long-lasting fluoropolymer emulsion resin that sets the standard for
field-applied sustainable green building applications. This innovative
resin allows paint formulators to manufacture premium weatherable
water-based coatings with long-term color retention, high initial and
long-term TSR (Total Solar Reflectance ), and high emissivity. These
coatings can be applied to a wide variety of substrates — including steel,
aluminum, PVC, SBS, asphaltic emulsion, TPO, EPDM, plastics, wood,
concrete and textiles — to enhance performance and extend useful life.
With the longest TSR retention of all paint systems tested, Kynar Aquatec®
based paints enhance the sustainable design of a building via reduced
heat absorption and subsequent energy load. Even dark roofs with low
reflectance can be converted in the field, achieving high reflectance and
substantial energy savings. In addition, Kynar Aquatec® based paints
contain low VOC levels compared to solvent-borne systems and reduce
the need for recoating, further minimizing VOC emissions over the life of
the substrate.
ENHANCE. SUSTAIN. PRESERVE.
P13
COOL ROOFS.SMART CHOICE.
Phot
o: P
eter
sen
Alu
min
um
www.kynaraquatec.com
Kynar 500® PVDF resin is marketed through a strict licensing program that ensures consistency, quality and
availability on a worldwide basis. To become an authorized licensee, paint companies participate in a two-year
development program and must use nothing less than 70% Kynar 500 resin [of the total binder weight ] in
their coating formulation. The minimum 70% Kynar 500 resin establishes the base performance for licensed
Kynar 500 resin-based coatings that the construction industry has trusted for more than 40 years.
P15
CONSISTENCY IS YOURKEY TO SUCCESS.FOR MORE THAN 40 YEARS.
Phot
o: E
ngle
rt In
c.
SUSTAINABILITY NEVER LOOKED SO GOOD.EARS.
When evidence began to accumulate that fluorosurfactants – a family of manufactured chemicals not
otherwise found in nature – might be persistent in the bloodstreams of animals, the U.S. EPA began to
look at this matter more closely. By the time the EPA asked for the cooperation of manufacturers and
users of fluorosurfactants in eliminating emissions of these chemicals into the environment, Arkema had
already begun to reduce its emissions of fluorosurfactants used in the production of Kynar 500® PVDF.
Through innovative thinking and determined effort, Arkema’s scientists succeeded in doing what
20 years ago would have been thought impossible – develop a process for production of Kynar 500 that
uses no fluorosurfactants. In alignment with worldwide “Green” initiatives, we are pleased to offer a
fluorosurfactant-free Kynar 500 PVDF – identical to the Kynar 500 you’ve known for over 40 years, with
the same long-term durability you’ve come to expect and rely on from Kynar 500 resin-based paints.
POWDER COATINGKynar 500® PVDF powder coatings provide superior physical properties.
The coating film hardness yields better mar resistance, as well as
long-term corrosion resistance and color and gloss retention. The
Kynar 500 powder coatings meet or exceed the performance criteria
established by the AAMA 2605 ten-year specification guidelines.
SIDINGKynar 500 PVDF resin-based films are premium quality factory-applied
films which retain their uniform appearance through many years of
service and weathering. Kynar 500 is featured over residential vinyl
siding for long-term color retention, dirt shedding and overall durability.
AUTOMOTIVEKynar 500 PVDF resin-based films exhibit high chemical and chip
resistance, excellent thermal stability, are impervious to UV radiation,
and are resistant to creep under mechanical stress and load. The
films can be found on molded automotive parts such as bumpers,
mirror housings and rocker panels.
FLEXIBLE FABRICThe Kynar 500 PVDF resin technology is used as a topcoat for architectural
textiles. The Kynar 500 PVDF resin-based topcoat offers resistance
to UV degradation and atmospheric chemical attack. The Kynar 500
resin-based topcoats also offer resistance to algae and fungal attack.
P17
THE VERSATILITY TO DO MORE.
Weather destroys things. Over time, sunlight, air and water will break down any and
all construction material. In the case of polymeric coatings for metals, the deterioration
is evident in the loss of color, gloss, adhesion and the appearance of chalking.
HIGHER PERFORMANCE OF KYNAR 500® PVDF RESIN-BASED COATINGS.In all critical measures of performance, Kynar 500 resin-based finishes deliver dramatically higher performance than other coating
products. The charts below show relative performance based on published evaluations of generic coatings and the opinions of leading
coating formulators.
WEATHERING PROPERTIES Kynar 500 Acrylic Silicone Polyester Vinyl Urethane AnodizedPolyester Plastisol
Color Retention 5 3 4 2 2 3 3
Gloss Retention 5 3 4 2 2 3 3
Chalk Resistance 5 3 4 2 2 3 3
Humidity Resistance 4 4 4 4 4 4 2
CHEMICAL RESISTANCE Kynar 500 Acrylic Silicone Polyester Vinyl Urethane AnodizedPolyester Plastisol
Acids & Alkalies 5 3 3 3 5 3 2
Oil Stain 4 3 4 4 4 3 3
Water Immersion 5 3 3 3 4 3 4
PHYSICAL PROPERTIES Kynar 500 Acrylic Silicone Polyester Vinyl Urethane AnodizedPolyester Plastisol
Abrasion Resistance 5 3 3 2 3 4 3
Impact Resistance 5 3 3 3 5 3 3
Film Flexibility 5 2 2 3 5 4 2
Hardness 3 5 4 5 3 4 4
Mar 3 4 4 4 3 3 4
P19
5 = Highest Performance 1 = Lowest Performance
THE TEST OF A COATING IS ITSABILITY TO RESIST WEATHERING.
Exposed 60 months
Unexposed
VINYL PLASTISOL BLUE
Exposed 160 months
Unexposed
SILICON POLYESTER BRONZE
The following photomicrographs
[ 1000 x magnification ] of test panels
dramatically depict how Kynar 500 ®
PVDF resin-based coatings resist
degradation caused by photoinitiated
oxidation and hydrolysis when
exposed to a subtropical environment
from 60 to 160 months.
Exposed 160 months
Unexposed
KYNAR 500 BRONZE
Exposed 152 months
Unexposed
PVF
In applications worldwide, Kynar 500® PVDF
resin-based metal coatings have demonstrated
superior performance and outstanding resistance
to film degradation. These coatings will withstand
extended exterior exposure to water, humidity,
temperature, ultraviolet rays, oxygen and
atmospheric pollutants.
The performance comparisons to the right were
compiled by an independent, accredited testing
laboratory and are based on actual exposure time in
Southern Florida as required by high performance,
organic coating specifications AAMA 2605.
KYNAR 500® PVDF RESIN-BASEDCOATINGS OUTPERFORM FEVE.Tests show that Kynar 500 resin-based finishes outperform
coatings based on the fluoropolymer resin commonly
known as fluorinated ethylene vinyl ether [ FEVE ]. The
reason: coatings formulated with FEVE claim to be 100%
fluoropolymer resin, but actually contain far less fluorine
than Kynar 500 resin-based coating formulations. Because
the C-F bond is one of the strongest bonds known, the
higher percentages of fluorine content in a coating results
in superior, long-term protection. The charts on this page
show the fluorine content and the Florida weathering
performance of the two technologies.
P21
In typical formulations [see shaded areas], Kynar 500
resin-based coatings contain higher fluorine levels
than FEVE-based coatings, resulting in greater
resiliency, color and gloss retention.
NOTHING WORKS BETTER LONGER.
Kynar 500 Acrylic Polyester Kynar 500 SiliconePolyester
Kynar 500 Acrylic Polyester Kynar 500 SiliconePolyester
Year 1 Year 14CASE STUDY: TAIYO STEELTaiyo Steel of Funabashi, Japan, made a test fence out of the south wall of a new plant
they were building. They wanted to test the weatherability of Taiyo Steel’s precoated metal
products. Fourteen years later, Kynar 500 resin-based coating was the only system that kept
its original appearance.
The final coating for aluminum, galvanized steel or aluminized steel shall be a factory-applied, oven-baked finish based on Kynar 500®
polyvinylidene fluoride resin. This finish shall be a dispersion coating based on Kynar 500 resin as formulated by an Arkema
Kynar 500 licensee. This finish shall be in strict accordance with the formulator’s specification and applied by an applicator approved by
the formulator. This finish, based on Kynar 500 resin, shall meet the performance criteria of AAMA 2605 specification and be certified
by the formulator as containing Kynar 500 resin manufactured by Arkema.
P23
Components to be Finished
Spandrel Panels, Wall Panels, Curtain Walls,
Roofing Systems, Store Fronts, Column Covers,
Entranceways, Louvers, Mullions, Fascia, Highway Signs
Replacement Windows for Retrofit Projects,
High-Rise Apartments, Condominiums, Office Buildings
Primary Windows, Doors and Handrails for Institutions,
Condominiums, Commercial Buildings,
Other High-Exposure Areas
Van, Bus and Truck Windows, Tubular Furniture,
Post-Formed Extruded Parts
Performance Requirements
Best Durability, Longest Color Life,
Best Corrosion Resistance, Flexibility,
Sand Abrasion, Chemical Resistance
Better Chalk and Fade Resistance, Longer Life,
Low Maintenance
Corrosion Resistance, Better Chalk and Fade Resistance
Color Retention and Chalk Resistance,
Excellent Flexibility
Specification
AAMA 2605
AAMA 2605
AAMA 2605
AAMA 2605
SPECIFICATION PERFORMANCE DATA FOR VARIOUS BUILDING COMPONENTS
Kynar 500 resin-based finishes meet or exceed the physical test performance criteria of the AAMA 2605 specifications for superior performance of organic coatings on architectural extrusions and panels.
© 2008 Arkema Inc. All rights reserved.
The statements, technical information and recommendations contained herein are believed to be accurate as of the date hereof. As the condition and methods of use of the products and of the information referred to herein arebeyond our control, Arkema expressly disclaims any and all liability as to any results obtained or arising from any use of the product or reliance on such information; NO WARRNATY OF FITNESS FOR ANY PARTICULAR PURPOSE,WARRNATY OF MERCHANTIBILITY, OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, IS MADE CONCERNING THE GOODS DESCRIBED OR THE INFORMATION PROVIDED HEREIN. The information provided herein relates only to thespecific product designated and may not be applicable when such product is used in combination with other materials or in any process. the user should thoroughly test any application before commercialization. Nothing containedherein should be taken as an inducement to infringe any patent and the user is advised to take appropriate steps to be assured that any proposed use of the product will not result in patent infringement.
Before handling this material, read and understand the MSDS [Material Safety Data Sheet ] for additional information on personal protective equipment and for safety, health and environmental information.
For environmental, safety and toxicological information, contact our Customer Service department at [ 800 ] 466 -2800 to request a Material Safety Data Sheet. Arkema Inc. believes strongly in responsible care as a public commitment.
*Details of the survey of architects’ preferences are available at www.kynar500.com.
Kynar 500® and Kynar Aquatec® are trademarks of Arkema Inc.
Min. Film Thickness 1.2 mils
Crosshatch Adhesion Dry, wet and boiling
100 %
Direct Impact Resistance 0.1 inch deformation
Minor crack / No pick-off
HCI Resistance [10%] 15- minute spot
No blister or color change
Mortar Resistance 24-hour surface contact
No adhesion or residue
Detergent Resistance 72- hour immersion
No change or loss of adhesion
Humidity Resistance 4000 hours 100% humidity
# 8 blister size maximum
Salt Spray Resistance 4000 hours 5% solution
Scribed Min. 7 on scribe, 8 on field
Metal Pretreatment Req. 40 mg /ft 2 chrome
Pencil Hardness F [ minimum ]
Abrasion Resistance 40 [ minimum ]
[ 1/ mil ]
Nitric Acid Vapor Resistance 30- minute exposure
< 5 ∆E color change
Window Cleaner Resistance 24- hour spot test
No visual change
Weathering 10 yrs Florida:
5 ∆E maximum color change
50% gloss retention min.
8 chalk min. [ 6 on whites ]
10% film erosion max.
PERFORMANCE TEST AAMA 2605
KYNAR 500® PVDFRESIN-BASED COATINGSPECIFICATION GUIDE.
www.kynar500.com
Arkema Inc. 2000 Market St. Philadelphia, PA 19103800.KYNAR.500
Arkema France420, rue d’Estienne d’Orves92705 Colombes Cedex France +33 (0) 1 49 00 80 80
Arkema Pte. Ltd. #01-01A, The Alpha, Science Park II10 Science Park Road117 684 Singapore, Singapore (+65) 64 19 91 99
ArkemaIndia – Branch OfficeRuby House, B Building, 2nd Floor J.K. Sawant Marg, Dadar (W)400028 Mumbay, India (+91) 22 2438 7500
Arkema 11F, Oriental Chemical Building 50, Sogong-dongJung-gu, Seoul, 110-718, Korea (82) 2 37 03 67 70
Arkema K.K.Fukoku Seimei Bldg 15F 2-2-2 UchisaiwaichoChiyoda-Ku, Tokyo 100 - 0011 Japan +81 3 5251 9919
Arkema Company Limited 8th/F-5, National Enterprise CenterNo. 188 Nanking Road Taipei, Taiwan, R.O.C.(+866) 2 2747 6979
Arkema6/F, Block 1, Life Hub@Daning1868 Gonghexin RoadShanghai 200072, P.R. ChinaTel: (+86) 21 6147 6888
CONTACT USAROUND THE WORLD.