Upload
owen-black
View
229
Download
3
Tags:
Embed Size (px)
Citation preview
KX-TDE/NCPNew Features/Functions
Ver.4 (Edition-7)
Panasonic System Networks CO.,LTD.
NoteVoIP Expansion
- IP-TSW Speech Path New MPR Required- 64ch SIP Trunk- VoIP Channel Capacity- DECT-CS on NCP
Network Feature Enhancement - Message Waiting A/K is needed- Absent Message A/K is needed- Called party name display before answer A/K is needed- Call Waiting A/K is needed
Network ICD-Group (UCD is supported) A/K is neededImproved Conference Group FunctionImproved Conference FeaturesPaging to DECTCall-FWD CLIPImproved Centralized VM Function A/K is needed
“New Features/Functions - 1
The new features/functions are available from,- KX-NCP500/1000 MPR Ver.4.- KX-TDE100/200/600 MPR Ver.4.
NoteImproved Call-FWD N/A Function (Ringing after C-FWD) A/K is needed
Improved CA integrationAlternative call if VoIP call failsImprove VoIP (H.323) Connection
- Support Non-Fast Connect- H323-ID registration
Other Improvements- BSS Operation Programming
Reserve Bit Function
“New Features/Functions - 2
The new features/functions are available from,- KX-NCP500/1000 MPR Ver.4.- KX-TDE100/200/600 MPR Ver.4.
VoIP Expansion
- IP-TSW Speech Path- 64ch SIP Trunk- VoIP Channel Capacity- DECT-CS on NCP
“VoIP Expansion
PBX TDE600 TDE100/200 NCP1000 NCP500Version Ver.3 Ver.4 Ver.3 Ver.4 Ver.2 Ver.4 Ver.2 Ver.4IP-TSW Speech Path (ch) (*1)
49 113 49 113 49 113 49 113
SIP-Trunk (ch) 32 64 32 64 32 64 8 64
IP-PT
SIP Ext (ch)128 128 128 128 64 128
40 IP-PT
32 SIP128
IP-CS (Units) 16 16 16 16 8 16 8 16
Ver.4 Improvements
*2) H.323 IP-Trunk of NCP500 expands 32ch, same as NCP1000, TDE100/200/600.
Trunk/Extension Protocol Ver.4 TTL
IP-TrunkH.323 32ch (*2)
64 chSIP Trunk 64ch
IP-ExtensionIP-PT 128ch
128 chSIP-Ext. 128chIP-CS 128ch (16 units)
*1) New MPR card is needed.
MPR
“IP-TSW Speech Path (113 path) -1New MPR Card + Ver.3 = 49 path
New MPR Card + Ver.4 = 113 path
Legacy
CO
How to identify new H/W
Old MPR Card + Ver.4 = 49 path
New MPR card is needed.
DSP
IP CS
IP-Ext.
IP Trunk
“IP-TSW Speech Path (113 path) - 2
New H/W
Should be “XA”
How to identify new H/W
Old H/W
Ver 4.0
“64ch SIP Trunk -1
16ch x 2
8ch x 1
16ch x 2
16ch x 4
16ch x 4
16ch x 4
Only Software upgrade.
NCP1000 Ver.2
NCP500 Ver.2
TDE100/200/600
Ver 4.0
“64ch SIP Trunk -2
16ch x 2
Ver 2/3
64ch x 1
Ver.4 supports 64ch SIP Trunk.Supports 64ch by one contract/account
Ver 4.0
Ver.2/3 supports 32ch SIP Trunk.Two contracts/accounts (16ch + 16ch)
New PCMC Channel Attribute Programming Menu
“
Source -1 Source - 2 DSP Resource
Traditional (CO/Ext.) IP-Trunk (G711) 2 3Traditional (CO/Ext.) IP-Trunk (G729) 5 5Traditional (CO/Ext.) IP-Ext./IP-CS (G711) 1 2Traditional (CO/Ext.) IP-Ext./IP-CS (G729) 4 4IP-Ext.(G711) IP-Trunk (G711) 2 4IP-Ext.(G711) IP-Trunk (G729) 5 6IP-Ext.(G729) IP-Trunk (G711) 5 6IP-Ext.(G729) IP-Trunk (G729) 8 8IP-CS (G711) IP-Trunk (G711) 3 5IP-CS (G711) IP-Trunk (G729) 6 7IP-CS (G729) IP-Trunk (G711) 6 7IP-CS (G729) IP-Trunk (G729) 9 9IP-Ext./IP-CS (G711) IP-Ext./IP-CS (G711) 2 3IP-Ext./IP-CS (G729) IP-Ext./IP-CS (G711) 5 6IP-Ext./IP-CS (G729) IP-Ext./IP-CS (G729) 8 8
DSP ResourceDSP-4
DSP-16
DSP-64
16 64 256
DSP PowerVoIP Channel Capacity - 1
DSP-4/16DSP-64
“
Talking PartyNCP1000 NCP500
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
IP-Trunk
IP-PT
G711 G711 8 32 32 64 8 32 32 64G711 G729 2 12 32 42 2 12 32 42G729 G729 2 8 32 2 8 32
IP-Trunk
SIP
G711 G711 8 32 32 64 8 32 32 64G711 G729 2 12 32 42 2 12 32 42G729 G729 2 5 32 2 5 32
IP-Trunk
IP-CS
G711 G711 3 18 32 50 3 18 32 50G711 G729 2 9 32 35 2 9 32 35G729 G729 1 5 27 1 5 27
IP-Trunk Legacy Ext
G711 5 32 32 44 5 28 28
G729 2 12 32 44 2 12 28
[Restriction Key]DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
The max. number of simultaneous telephone calls (NCP1000/500).
VoIP Channel Capacity - 2
H.323 TrunkSIP Trunk
“
Talking PartyNCP1000 NCP500
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
Legacy-CO
IP-PT
G711 16 64 64 16 64 64
G729 4 16 64 4 16 64
Legacy-CO
SIP
G711 16 64 64 16 64 64
G729 4 16 64 4 16 64
Legacy-CO
IP-CS
G711 16 64 64 16 64 64
G729 4 16 64 4 16 64
Legacy-Ext
IP-PT
G711 16 44 44 16 28 28
G729 4 16 44 4 16 28
Legacy-Ext
SIP
G711 16 44 44 16 28 28
G729 4 16 44 4 16 28
Legacy-Ext
IP-CS
G711 16 44 44 16 28 28
G729 4 16 44 4 16 28
VoIP Channel Capacity - 3
[Restriction Key]
The max. number of simultaneous telephone calls (NCP1000/500).
DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
“
Talking PartyNCP1000 NCP500
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
IP-CS
IP-PT
G711 G711 8 32 56 8 32 56G711 G729 3 12 42 3 12 42G729 G729 2 8 32 2 8 32
IP-CS
SIP
G711 G711 8 32 56 8 32 56G711 G729 3 12 42 3 12 42G729 G729 2 8 32 2 8 32
IP-CS
IP-CS
G711 G711 8 32 32 8 32 32G711 G729 3 12 32 3 12 32G729 G729 2 8 32 2 8 32
VoIP Channel Capacity - 4
[Restriction Key]
The max. number of simultaneous telephone calls (NCP1000/500).
DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
“
Talking PartyTDE100/200 TDE600
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
IP-Trunk
IP-PT
G711 G711 - 32 32 64 - 32 32 64G711 G729 - 12 32 42 - 12 32 42G729 G729 - 8 32 - 8 32
IP-Trunk
SIP
G711 G711 - 32 32 64 - 32 32 64G711 G729 - 12 32 42 - 12 32 42G729 G729 - 8 32 - 8 32
IP-Trunk
IP-CS
G711 G711 - 18 32 50 - 18 32 50G711 G729 - 9 32 35 - 9 32 35G729 G729 - 5 27 - 5 27
IP-Trunk Legacy Ext
G711 - 32 32 64 - 32 32 64
G729 - 12 32 50 - 12 32 50
VoIP Channel Capacity - 5
[Restriction Key] H.323 TrunkSIP Trunk
The max. number of simultaneous telephone calls (TDE100/200/600).
DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
“
Talking PartyTDE100/200 TDE600
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
Legacy-CO
IP-PT
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
Legacy-CO
SIP
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
Legacy-CO
IP-CS
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
Legacy-Ext
IP-PT
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
Legacy-Ext
SIP
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
Legacy-Ext
IP-CS
G711 - 64 113 - 64 113
G729 - 16 64 - 16 64
VoIP Channel Capacity - 6
[Restriction Key]
The max. number of simultaneous telephone calls (TDE100/200/600).
DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
“
Talking PartyTDE100/200 TDE600
DSP4
DSP16
DSP64
DSP4
DSP16
DSP64
IP-CS
IP-PT
G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32
IP-CS
SIP
G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32
IP-CS
IP-CS
G711 G711 - 32 56 - 32 56G711 G729 - 12 42 - 12 42G729 G729 - 8 32 - 8 32
VoIP Channel Capacity - 7
[Restriction Key]
The max. number of simultaneous telephone calls (TDE100/200/600).
DSP Power-1
Number of TDM-IP Channels
Number of Trunks
Number of Handsets.
DSP Power-2
“DECT-CS on NCP
CS factor
Ver.2 Ver.4
NCP500 NCP1000 NCP500 NCP1000
CSKX-TDA0158 2 2 4 3 5KX-TDA0141/0155 1 4 8 7 11KX-NCP0158 2 6 8 16 16
Max. CS factor 12 16 32 32
Max. PS 64 64 64 64
The max. number of CS/PS.
Network Feature Enhancement
“Network Feature EnhancementThe following features are newly supported from Ver.4
1 When calling extension in other PBX - Leave Message Waiting
- Absent Message Display - Called party name display before answer
2 When extension in other PBX is busy- Call Waiting- Busy Override- Call Back- Call Monitor- Leave Message Waiting
3 When extension in other PBX is DND - DND Override, DND tone and LCD
4 Incoming call from extension in other PBX - Ring tone (Single or Double) as extension call- Call Waiting- Call FWD / DND as extension call- Automatic answer as extension call- Extension call block by COS-COS
5 Incoming call to extension in other PBX - Directed Call Pickup
“
1- Ext.1001 calls Ext.2001 (Busy)2- Ext.1001 receive “Busy Tone”3- Press “Message Waiting” button on Ext.1001.4- The Message Waiting LED on Ext.2001 turns Red.- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
The function works over, Extension Numbering & PBX Numbering.
Free/Busy
Message Waiting
1- Ext.1001 calls Ext.2001 (Free)2- Ext.2001 does not answer.3- Press “Message Waiting” button on Ext.1001.4- The Message Waiting LED on Ext.2001 turns Red.- Ext.2001 can call back to Ext.1001 press “Message Waiting” button.
Ext.2001Call
Ext.1001
VoIP-Net
Network Feature Enhancement - 1A/K is needed
“Absent Message Display
1- Ext.1001 calls Ext.2001 (Absent Message “Go Home)2- “Go Home” is displayed on Ext.1001.
Absent Message“Go Home”
The function works over, Extension Numbering & PBX Numbering.
2. Send “Go Home”
Go Home
Ext.20011. Call
Ext.1001
VoIP-Net
Network Feature Enhancement - 2A/K is needed
“
Ext.1001Tanaka
Calling party name display before answer (Already Supported)
1- Ext.1001 (Tanaka) calls Ext.20012- Calling party name (Tanaka) is displayed on Ext.2001.
Ext.2001
The function works over, Extension Numbering & PBX Numbering.
2. Send “Tanaka”
Tanaka1001
1. Call
1001: Tanaka
Before Ver.4 External call
Ver.4 Internal call
VoIP-Net
Network Feature Enhancement - 3
A/K is needed
“
Ext.2001Honda
Called party name display before answer
1- Ext.1001 (Tanaka) calls Ext.20012- Calling party name (Tanaka) is displayed on Ext.2001.3- Called party name (Honda) is displayed on Ext.1001.
The function works over, Extension Numbering & PBX Numbering.
2. Send “Tanaka”
2001: Honda
1. CallExt.1001
3. Send “Honda”VoIP-Net
Network Feature Enhancement - 4
A/K is needed
1. Call
2- Ext.1001 LCD
1- Ext.1001 calls Ext.2001 (Busy)
“
3- Press “WAIT” button. 4- Call waiting on Ext.2001.
Ext.1001
The function works over, Extension Numbering & PBX Numbering.
Call Wait3. Press “WAIT”
2. Send “Busy” Info.
WAIT OVER C.BCK
2001: Busy
4.Call Wait
Ext.2001
Talking
Ext.2002
VoIP-Net
Call waiting : ON
Network Feature Enhancement - 5
Call waiting (Ext.2001) has to be “ON”.
A/K is needed
2- Ext.1001 LCD
1- Ext.1001 calls Ext.2001 (Busy)
“
3- Press “OVER” button. 4- We can override (Barge-in) the communication between Ext.2001
and 2002.
Ext.1001
The function works over, Extension Numbering & PBX Numbering.
Busy Override
2. Send “Busy” Info.
WAIT OVER C.BCK
2001: Busy
Ext.2002
Talking
3. Press “OVER”
4. Override
1. CallExt.2001
VoIP-Net
Network Feature Enhancement - 6A/K is needed
2- Ext.1001 LCD
1- Ext.1001 calls Ext.2001 (Busy)
“
3- Press “5” button. 4- We can monitor the communication between Ext.2001 and 2002.
The function works over, Extension Numbering & PBX Numbering.
Call Monitor
2. Send “Busy” Info.
WAIT OVER C.BCK
2001: Busy
Ext.2002
Talking
3. Press “5”
4. Monitor
Ext.2001Ext.10011. Call
VoIP-Net
Network Feature Enhancement - 7A/K is needed
“
Related program.
Ext.2001Busy
Related program for Call Monitor/Busy Override
Ext.2002
Talking
Monitor/Busy Override
Ext.1001
VoIP-Net
Network Feature Enhancement - 8
“
Related program.
Related program for Busy Override
Ext.2002
Talking
Monitor/Busy Override
Ext.2001Ext.1001
VoIP-Net
Network Feature Enhancement - 9
2- Ext.1001 LCD
1- Ext.1001 calls Ext.2001 (Busy)
“
3- Press “C-BCK” button. 4- When Ext.2001 became idle, Ext.1001 starts ring. (Call back starts)
Ext.1001
The function works over, Extension Numbering & PBX Numbering.
Ext.2001Busy
Call Back
2. Send “Busy” Info.
WAIT OVER C.BCK
2001: Busy
3. Press “C.BAK”
Busy
1. Call
VoIP-Net
Network Feature Enhancement - 10
2- Ext.1001 LCD
1- Ext.1001 calls Ext.2001 (DND)
“
- “DND” Tone on Ext.1001
3- Press “OVER” button. 4- Ext.2001 starts ringing.
Ext.1001
The function works over, Extension Numbering & PBX code Numbering.
Ext.2001Busy
DND
2. Send “DND” Info.
OVER
2001: Do Not Disturb
DND
We can see the other end set to “DND”
3. Press “OVER”4. Ring1. Call
VoIP-Net
Network Feature Enhancement - 11A/K is needed
“
Ext.1001
Ext.2001Busy
DND
2. Send “DND” Info.
DND
3. Press “OVER”4. Ring
Related program.
1. Call
VoIP-Net
Network Feature Enhancement - 12A/K is needed
“
Ext.2001Busy
Ring tone (Single or Double) as extension call
2. Ring
1- Ext.1001 calls Ext.20012- Ext.2001 starts ringing.
Ver.4.0 : Internal call ring tone.Before Ver.4.0 : External call ring tone.
The function works over, Extension Numbering & PBX code Numbering.
Ext.10011. Call
VoIP-Net
Network Feature Enhancement - 13
A/K is needed
“
Ext.2001Busy
Auto Answer
1- Ext.1001 calls Ext.20012- Ext.2001 answers the call automatically.
Ver.4.0 : PossibleBefore Ver. 4.0 : No possible
Internal call Auto Answer
= Enable
The function works over, Extension Numbering & PBX code Numbering.
Ext.10011. Call
VoIP-Net
Network Feature Enhancement - 14A/K is needed
“
CO
Ext.2001Busy
Call-FWD setting on Ext.2001
PBX-2
We can set different C-FWD destination on Ext.2001 for external calls and other PBX call (Internal) calls.E.g. Internal call destination: Call from Ext.1001 and Ext.2002
External call destination: Call from external (Through PBX-1)
PBX-1
Ext.2002
Call
Call
Call
The function works over, Extension Numbering & PBX code Numbering.
Ext.1001
VoIP-Net
Network Feature Enhancement - 15
A/K is needed
1- Ext.2002 calls Ext.20012- Ext.2001 starts ringing.3- Ext.1001 can pick up the call on Ext.2001
“
The function works over, Extension Numbering and PBX numbering.
Pick up call (Direct call pick up)
3. Pick up
Ext.2002
1.Call
Ext.20012. Ring
Ext.1001
How to program ?
VoIP-Net
Network Feature Enhancement - 16
“Pick up call (Direct call pick up): Extension Numbering
3. Pick up (Press a DSS (20**412001)
1.Call
Ext.20012. Ring
Ext.1001
20**412001
DSS
The target PBX numbering plan + *
Ext. No
Access code
VoIP-Net
Network Feature Enhancement - 17
*40 (Pick-up by group number) does not support A/K is needed
“Pick up call (Direct call pick up): PBX Numbering
3. Pick up (Press a DSS (72*411001)
1.Call
Ext.10012. Ring
Ext.1001
72*411001
DSS
Ext. No
Access code
PBX code
2
PBX code
1
TIE access + PBX number
VoIP-Net
Network Feature Enhancement - 18
A/K is needed
“
Ext.1001
Pick up call (Direct call pick up): CA Ver.3 (Future Plan)
Ext.2002
1.Call
Ext.20012. Ring
CA ServerCA Ver.3
Monitor
3. Pick up
VoIP-Net
Network Feature Enhancement - 19
A/K is needed
“Paging with Pick up call (Direct call pick up)
1.Call
Ext.2001
Ext.2002
PBX-1 PBX-2
Ext.1001
Ofiice-2
Audio port
1- Ext.2001 calls Ext.20022- On Ext.2002 (Voice Call is available Paging) ➔3- Ext.1001 can pick up (72*412002) the call on Ext.2002
2. Paging
3. Pick up
Ext.2002 is a PBX-2 extension.
VoIP-Net
Network Feature Enhancement - 20
Ofiice-1
A/K is needed
When Ext.2001 calls Ext.1001.Ver.4.0 : Ext.1001 starts ring.Before Ver.4.0 : Busy Tone
“
Ext.1001Improved Boss/Secretary function
Ext.2001
Boss(C-FWD to Ext.2001)
Secretary
Call Ext.1001
The function works over, Extension Numbering & PBX code Numbering.
VoIP-Net
Network Feature Enhancement - 21
A/K is needed
“
Ext.2001COS-1
Internal call Block (COS-COS setting)
Ext.1001 (COS-1) calls Ext.2001 (COS-1): Not BlockedExt.1002 (COS-2) calls Ext.2001 (COS-1): Blocked
Ext.1002COS-2
The function works over, Extension Numbering & PBX code Numbering.
Ext.1001COS-1
COS Information
Call Block
Call
VoIP-Net
Network Feature Enhancement - 22
A/K is needed
“Auto answer enable/disable by COS
Ext.2001
Ext.1001COS-2
Call
Auto Answer=ON
Ext.1002COS-3
Calling Ext. Ext.2001Ext.1001 (COS-2) Auto AnswerExt.1002 (COS-3) Ringing
COS Information
VoIP-Net
Network Feature Enhancement - 23
A/K is needed
“Internal call works this featureAuto answer enable/disable by COS
Ext.2001
Ext.2003COS-3
Ext.1001 Auto Answer=ON
Ext.1002
Calling Ext. Ext.2001Ext.2002 (COS-1) Auto AnswerExt.2003 (COS-3) RingingExt.1001 (COS-2) Auto AnswerExt.1002 (COS-3) Ringing
Call
VoIP-Net
Ext.2002COS-1
Network ICD-Group
“
Virtual PS Ext.1003
C-FWD = 2002
Before Ver.4.Network ICD-Group
Ext.2002
Ext.2001
Ext.1002
ICD-Group
ICD-GroupExt.1000
Ring
Ext.1001
Call
CO VoIP-Net
“
Virtual PS Ext.1003
C-FWD = 2002
Network ICD-Group
Ext.2002
Ext.2001
Ext.1002
ICD-Group
CO
ICD-GroupExt.1000
Ring (Already Supported)UCD (Ver.4)Hunt (Ver.4)
Ext.1001
Note: Automatic Log-out is not support for Virtual PS.
Call
Ver.4.
VoIP-Net
Improved Conference Group Function
“Conference Group mode programmingImproved Conference Group Function - 1
Ver.4: Flexible Program
Before Ver.4: System Program
“
Owner Two-way
N/A
Owner Two-way One way
N/A
Owner Two-way One way
Group-8: 8-Party Conference Mode
Group-2: Broadcast
Total32 Terminals
Conference Group mode programming (Ver.4)
Group-1: 8-Party Conference Mode
Improved Conference Group Function - 2
“
Owner
Joining external participants
Conference Group
If an owner wants to have a conference with only external participants. ➔ How to achieve ?
Before Ver.4
Conference Group
Before a conference is established, the external participant cannot join.
Owner
Improved Conference Group Function - 3
3. Join
“
- An owner establishes a group conference with physical connection D-PT or Softphone.
- An external participant joins the conference. - The owner presses the DSS button of the D-PT twice. - Press “Flash”/”Recall” key. ➔ Cuts the D-PT from the conference.
Advise solution
D-PT or SoftphoneAuto Answer = ON
Auto Answer mode works for conference group call on Ver.4.
Owner Conference Group
Ver.4
1. Call2. Conference is established.
4. Cuts the D-PT.
Joining external participantsImproved Conference Group Function - 4
“Reserve Bit Function (0A-6)
Default (Disable)
The above function does not work.
A D-PT (Auto Answer = Off) in conference group: An owner establishes a group conference➔ Compulsory D-PT Auto answer function Enable.
0A-6=Disable
0A-6=Enable
This is PSN plan
Owner Conference Group
Auto Answer = OFF
Call
Improved Conference Group Function - 5
Improved Conference Features
“
CO
Subscriber-A
Subscriber-B
Improved Conference Features - 1
Ext.1001
1- Ext.1001 (Owner) holds three party conference.Subscriber- A, Subscriber-B
2- Ext.1001 on-hooks ➔ All connection disconnects.
Before Ver.4 Function
Customer wants to keep CO-to-CO connection.
Owner
Three party conference.
“Improved Conference Features - 2 Ver.4 New Option
CO-CO call LimitationEnable : Default (Before Ver. 4 New function)Disable : Option (Ver. 4 New function)
CO
“Improved Conference Features - 3Ver.4 Function (CO-CO call Limitation = Disable)
3. The PBX is keeping CO-to-CO connection.
1. Ext.1001 (Owner) holds three party conference.
CO
Subscriber-A
Subscriber-B
Ext.1001
Subscriber-A Ext.1001
Subscriber-B
2. Ext.1001 on-hooks.
NB: This operation does not work for conference group call.
Owner
Owner
“
CO
Subscriber-A
Ext.1002
Improved Conference Features - 4
Ext.1001
1- Ext.1001 (Owner) holds three party conference.Subscriber- A and Ext.1002.
2- Ext.1001 on-hooks ➔ The PBX keeps Subscriber- A and Ext.1002 connection.
Owner
Working scenario
“
CO
Subscriber-A
Ext.1002
Improved Conference Features - 5
Ext.1001
1- Ext.1001 (Owner) holds three party conference.Subscriber- A and Ext.1002.
2- Ext.1001 on-hooks ➔ The PBX keeps CO to Ext.1002 call.
Working scenario
Owner
VoIP-Net
“
Ext.1003
Improved Conference Features - 6
Ext.1001
1- Ext.1001 (Owner) holds three party conference.Ext.1002 and Ext.1003.
2- Ext.1001 on-hooks ➔ The PBX keeps Ext.1002 to Ext.1003 call.
Owner
Ext.1002
VoIP-Net
Working scenario
“
CO
Subscriber-A
Ext.1002
Subscriber-B
Improved Conference Features - 7
Ext.1001
1- Ext.1001 (Owner) holds four party conference.Subscriber- A, Subscriber-B and Ext.1002.
2- Ext.1001 on-hooks ➔ All connections disconnect.
Owner
Not working scenario
Paging to DECT(by using auto answer/conference)
“
Ext.1001
Auto-Answer=ON
Paging to DECT - 1
1.Call Ext.2001
Auto-answer function also works a conference group call.
3. Speaker automatically ON
1. Ext.1001 calls Ext.2001 (Auto-Answer=ON)2. The PBX calls Ext.20013. Ext.2001 speaker phone automatically ON.
Ext.2001
Auto-answer function for DECT
2. Call
“
1.Dial *321#
Ext.2003Ext.2001 Ext.2002
Auto-Answer=ON
1. Ext.1001 holds a conference (*321#)2. The PBX calls pre-programmed DECT-PS3. All DECT PS on the conference group automatically answer.
Speaker phone automatically “ON”.4. Ext.1001 user can page.
Paging to DECT - 2Auto-answer function for Conference Group
Conference Group No.1
3. Speaker automatically ON
Ext.1001
2. Call
4. Paging
“
Ext.1001
Ext.2003Ext.2001 Ext.2002
Auto-Answer=ON
Broadcasting modeMax. member
Max. talker
When paging starts,
Enable → 32 8 DECT-PS cannot speak at first.
Disable → 8 8 DECT-PS speak at first.
Conference Group No.1
- DECT user and SLT user can make conference group call as well as PT user.
- Hand over is supported for conference group call after DECT answers. (Ver. 3 does not support hand over for conference group call.)
- One DECT-PS needs one wireless channel.
Paging to DECT - 3
“Reserve Bit Function (0A-7)
Default (Disable)
0A-7=Disable
0A-7=Enable
Owner Conference Group
Auto Answer = Off
Call
Paging to DECT - 4
This is PSN plan
The above function does not work.
A PS (Auto Answer = Off) in conference group: An owner establish a group conference➔ Compulsory PS Auto answer function Enable.
Call-FWD CLIP
“
ISDN
1- Ext.1000 calls Ext.10012- The call is re-routed to subscriber-A.3- CLIP? Ext.1000 CLIP or Ext.1001 CLIP?
Subscriber-A
Ext.1001CLIP 477-1001C-FWD toSubscriber-A
Call-FWD CLIP - 1 (Internal call)
The PBX sends 477-1001 as CLIP
The PBX sends 477-1000 as CLIP
CLIP ?
Calls
Ext.1000CLIP 477-1000
“
ISDN
1- Ext.1000 calls Ext.6000 (ICG-D)2- The call is re-routed to subscriber-A.3- CLIP? Ext.1000 CLIP or Ext.2000 CLIP?
Ext.1000CLIP 477-1000
Subscriber-A
The PBX sends 477-2000 as CLIP
The PBX sends 477-1000 as CLIP
CLIP ?
Dummy PS
Ext.2000CLIP 477-2000C-FWD toSubscriber-A
ICD-G 6000
Ext.1001
Calls
Call-FWD CLIP - 2 (Internal call)
“
ISDN
Subscriber-A
Ext.1000CLIP 477-1000C-FWD toSubscriber-B
Subscriber-B
1- Subscriber-A calls Ext.10002- The call is re-routed to subscriber-B3- CLIP? Subscriber-A CLIP or Ext.1000 CLIP?
The PBX sends 477-1000 as CLIP
The PBX sends Subscriber-A CLIP as CLIP
Call-FWD CLIP - 3 (External call)
“
ISDN
Subscriber-A
Dummy PS
Ext.2000CLIP 477-1000C-FWD toSubscriber-B
ICD-G 6000
Ext.1000CLIP 477-1000
Subscriber-B
1- Subscriber-A calls Ext.6000 (ICG-D)2- The call is re-routed to subscriber-B3- CLIP? Subscriber-A CLIP or Ext.2000 CLIP?
The PBX sends 477-1000 as CLIP
The PBX sends Subscriber-A CLIP as CLIP
Call-FWD CLIP - 4 (External call)
Improved Centralized VM Function
“
VoIP-Net
VM transfer over networkImproved Centralized VM function - 1
Ext.2002
Ext.2001
CO
2. Press “VTR + 2001+#
1. Call
Mail-BOX Ext. 101 1001 (PBX-1)102 2001 (PBX-2)103 2002 (PBX-2)
Ext.1001
1. Ext.1001 receives a call.2. Press the “VTR” button and dial remote extension number + #.3. The call goes to Ext.2001 mail Box.
PBX-1 PBX-2
Centralized VM
3. Go to Ext. 2001 Mail BOX
“
VoIP-Net
VM transfer over networkImproved Centralized VM function - 2
Ext.2002
Ext.2001
CO
2. Press “VTR + 1001 + #
1. Call
Mail-BOX Ext. 101 1001 (PBX-1)102 2001 (PBX-2)103 2002 (PBX-2)
Ext.1001
1. Ext.2001 receives a call.2. Press the “VTR” button and dial remote extension number + #.3. The call goes to Ext.1001 mail Box.
PBX-1 PBX-2
Centralized VM
3. Go to Ext. 1001 Mail BOX
“
VoIP-Net
VM transfer over networkImproved Centralized VM function - 3
Ext.2002
Ext.2001
CO
2. Press “VTR + NDSS Button
1. Call
Mail-BOX Ext. 101 1001 (PBX-1)102 2001 (PBX-2)103 2002 (PBX-2)
Ext.1001
1. Ext.2001 receives a call.2. Press the “VTR” button and Press the NDSS button for Ext.1001.3. The call goes to Ext.1001 mail Box.
PBX-1 PBX-2
Centralized VM
3. Go to Ext. 1001 Mail BOX
NDSS (Ext.1001)
“Transfer re-call DestinationImproved Centralized VM function - 4
Ext.2001
CO
1. Call
Mail-BOX Ext.101 1001 (PBX-1)102 1002 (PBX-1)103 2001 (PBX-2)
Ext.1002 C-FWD N/A to VMStep 4.
Before Ver.4 Transfer re-call to Ext.1001Ver.4 The call is re-routed to the Centralized VM
PBX-1 PBX-2
Centralized VMExt.10012. Transfer to Ext.1002
Un-screened3. Does not
answer
VoIP-Net
Improved Call-FWD N/A Function
“
CO
C-FWD N/A function before Ver.4Improved Call-FWD N/A Function - 1
Ext.2002
Ext.2001Subscriber-A
Call-FWD N/A toSubscriber-A
N/A Timer=15sec1. Call
3. Fwd to Subscriber-A
1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to the subscriber-A ➔ Ext.2001 stops ringing.
2. Ring.
“
CO
C-FWD N/A function Ver.4
Ext.2002
Ext.2001Subscriber-A
Call-FWD N/A toSubscriber-A
N/A Timer=15sec1. Call
3. Fwd to Subscriber-A
1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to the subscriber-A
Keep ring after FWD NA to COEnable ➔ Ext.2001 keeps ringing.Disable ➔ Ext.2001 stops ringing.
4. The subscriber-A and Ext.2001 can answer the call.
2. Ring.
Improved Call-FWD N/A Function - 2
A/K is needed
“
CO
C-FWD N/A function Ver.4
Ext.2002
Ext.2001Subscriber-A
Call-FWD N/A toSubscriber-A
N/A Timer=15sec1. Call
3. Fwd to Subscriber-A
2. Ring.
CO Type Available
SIP/H.323 G/W YES
ISDN YES
Analogue
W/ Reverse YES
W/O Reverse NO
CPC Analogue Line NO
E1 YES
T1LCO NOGCO/DID/E&M YES
The Keep ring after FWD NA to CO Function is available on the following CO
Improved Call-FWD N/A Function - 3
“
CO
C-FWD N/A function Ver.4
Ext.2002
Ext.2001Subscriber-A
Call-FWD N/A toSubscriber-A
N/A Timer=15sec1. Call
3. Fwd to Subscriber-A
2. Ring.
Ext.2001
1. Ext.2002 calls Ext.2001 ➔ DSS flashing.2. 15 sec ➔ DSS flashing.3. The call is forwarded to the Subscriber.4. The Subscriber does not answer ➔ DSS flashing.5. The Subscriber answers ➔ DSS turns “Red”.
This situation differs from the usual DSS display. Actually, Ext.2001 is not busy, other extension can call to Ext.2001.
Improved Call-FWD N/A Function - 4
If Ext.2001 DSS is assigned on other Ext.
“C-FWD N/A function Ver.4
Ext.2003
Ext.2001
Call-FWD N/AExt.2003
N/A Timer=15sec1. Call
2. Ring.
Improved Call-FWD N/A Function - 5
Ext.2002
1. Ext.2002 calls Ext.20012. Ext.2001 starts ringing, 15sec.3. The call is forwarded to Ext.20034. Ext.2001 stops ringing.
3. Fwd to Ext.2003
If Ext.2001 is set C-FWD to Internal.
Improved CA integration
“Improved CA integration
When CA user logs to PBX (Ver.4), the PBX send “Manager” and “CA Chat Ability” information to CA.
CA
Client-1
1. Log-in
2. Data
Support from CA Ver.3
Disable un-necessary chat
Disable manager function from basic CA client
Send system data to CA
“Improved CA integration
CA
Display changed
Absent Message is not automatically changed.
Ver.4Absent status is not displayed from Ver.4.
PROG INFO RING MENUTHU 09:40 - *
PROG INFO RING MENU
10 JUN. 09:40 THU
Not in usedBefore Ver.4Absent status is displayed automatically by CA when PC is not used for pre programmed time.
Customer does not like this change.
Alternative call if VoIP call is fails(CO call ARS ➔ ➔ VoIP call Failed CO call)➔ ➔
NTT-CO
Dials0-00-44-111-2222
“Alternative call if VoIP call fails - 1+44 (0)111-2222
PBX-JapanBT CO
Telephone cost are high.
Standalone system
0-00-44-111-2222
International access code
Subscriber No.
CO access code
Country code
VoIP Net
“
NTT-CO
+44 (0)111-2222
TG-2
PBX-Japan
PBX-UK
BT COARS=ON
80201112222
01112222
Using remote PBX and VoIP and ARS function
Save cost !!!
Modify the dialled number by ARS table.
Dials0-00-44-111-2222
Alternative call if VoIP call fails - 2
“
NTT-CO
+44 (0)111-2222
TG-2
PBX-Japan
PBX-UK
BT COARS=ON
80201112222
If VoIP Network is Down ?
VoIP Net = Down
Using remote PBX and VoIP and ARS function
Modify the dialled number by ARS table.
Dials0-00-44-111-2222
Alternative call if VoIP call fails - 3
NTT-COARS=ON
Dials0-00-44-111-2222Checks Quick
Dialling table
YESRe-order Tone
NO
“
The call is VoIP call ?
80201112222
+44 (0)111-2222
TG-2
PBX-Japan
PBX-UK
BT CO
VoIP Net = DownNo-
response801-00-44-111-2222
A new function from Ver.4.
Using remote PBX and VoIP and ARS function
Modify the dialled number by ARS table.
Modify the dialled number by Quick Dial table.
Alternative call if VoIP call fails - 4
“Programming
ARS
Please do not select “On for any CO Access Operation”
Modify the dialled number by ARS
table.
Select “On for Local Access Operation”
Alternative call if VoIP call fails - 5
“Programming
Quick Dial
Need to Check
CO access No.
Trunk access No.
Alternative call if VoIP call is failed - 6
“Reserve Bit Function (09-6)
Default (Disable)
The alternative call function does not work.
The alternative call function on Ver.4.
09-6=Disable
09-6=Enable
From TDE/NCP V4.
Alternative call if VoIP call fails - 7
CO call ARS VoIP call Failed CO call➔ ➔ ➔ ➔The alternative call function works.
CO call ARS VoIP call Failed CO call➔ ➔ ➔ ➔
CO call ARS VoIP call Failed Re-order tone➔ ➔ ➔ ➔
Improve VoIP (H.323) Connection
“
VoIP Net
H323 IP-G/W
Call
Receiving call (a non-Fast connect mode call):Before Ver.4 : PBX does not accept the call.Ver.4 : PBX accepts the call.
Improve VoIP (H.323) Connection - 1Support Non-Fast Connect
Virtual H323 IP-G/W
Call
This improvement is adapted only for virtual gate way.(Not for LPR card gate way)
“
VoIP Net
H323 IP-G/W
Call
Making call:The TDE/NCP makes a call with fast connection mode.The other PBX replies with non fast connection mode.Before Ver.4 : PBX does not accept this reply, disconnect the call.Ver.4 : PBX accepts this reply
Improve VoIP (H.323) Connection - 2Support Non-Fast Connect
Virtual H323 IP-G/W
1. Call2. Reply
This improvement is adapted only for virtual gate way.(Not for LPR card gate way)
3. Connection?
“
VoIP Net
H323 IP-G/W
Call
Making call:The TDE/NCP makes a call with fast connection mode.The other PBX replies with non fast connection mode.Before Ver.4 : PBX does not accept this reply, disconnect the call.Ver.4 : Support H.245 Negotiation.
Improve VoIP (H.323) Connection - 3Support Non-Fast Connect
Virtual H323 IP-G/W
1. Call2. Reply
This improvement is adapted only for virtual gate way.(Not for LPR card gate way)
3. H.245 Negotiation
“Reserve Bit Function (06-0): H323-ID registration
Default (Disable)
06-0=Disable
06-0=Enable
LAN
The H323-ID registration is possible. (TDE Ver.2)The PBX send “Zonename” information to the Gate keeper. (Ver.4)The PBX send “Band Wide” information to the Gate keeper. (Ver.4)
Gate Keeper
The H323-ID registration is not possible.
RegistrationH323 G/W
Improve VoIP (H.323) Connection - 4
Other Improvements
“
Ver.4 (COS setting)
Other ImprovementsBSS Operation Programming
Before Ver.4 (System Program)
Ext.1001 (Operator: COS-1) Mainly un-screened call transfer.Ext.1002 (Worker: COS-2) Mainly screened call transfer.
PC Maintenance Console (PCMC) for Ver.4.
“PCMC for KX-TDE/NCP Ver.4.Please use U-PCMC Ver. 6.x.x.x KX-TDE600 Ver. 6.0.x.x or later
KX-NCP500/1000 Ver. 6.1.x.x or laterKX-TDE100/200 Ver. 6.2.x.x or later
Thank You Very MuchFor Your Attention
Modification History➔ Edition-2Page-11
Page 72 TVR ➔ VTRAdd Page 79Page 81 CS ➔ CA
Page 14
Page 34 Ext.2001 Ext.2002➔Page 39 72*412001 ➔ 72*412002 Page 58 CO-to-CO call CO to Ext.1002 call.➔Page 59 CO-to-CO call Ext.1002 to Ext.1003 call.➔Page106 4. Ext.2003 does not answer the call and the call is re-routed to VM.
➔ The call is re-routed to VM. ➔ Edition-4
Add Page 73.
5
➔ Edition-5Page-51 : (Old) - The owner presses the DSS button of the D-PT.
(New) - The owner presses the DSS button of the D-PT twice.- Press "Flash"/"Recall" key.
Page-55 : (Old) CO-CO call LimitationEnable : Default (Ver. 4 New function)Disable : Option (Before Ver. 4 New function)
(New) CO-CO call LimitationEnable : Default (Before Ver. 4 New function)Disable : Option (Ver. 4 New function)
Page-56: (Old) Ver.4 Function (CO-CO call Limitation = Enable)(New) Ver.4 Function (CO-CO call Limitation = Disable)
Page-72 : (Old) 2. Press “VTR + 2001 ➔ (New) 2. Press “VTR + 2001+#Page-74 : Add.Page-81 : (Old) If Ext.2001 is set C-FWD to External.
(New) If Ext.2001 is set C-FWD to Internal.
➔ Edition-6Page-2, 20-26,30-34, 36-39, 41-42. Add: A/K is needed
➔ Edition-7Page-40 Add: A/K is needed