Upload
nguyenthuan
View
212
Download
0
Embed Size (px)
Citation preview
KWIK-SMART METAL FRAMING| PIPE SUPPORTS| TEST PLUGS| HARDWARE
| CABLE MANAGEMENT
BUILDING SERVICES SOLUTIONS
CAT
ALOGUE
Head Office:Binder Group PTY LTD (Western Australia)26 Miles RoadKewdale WA 6105Phone: +61 (0) 8 9353 2208Fax: +61 (0) 8 9353 2751Email: [email protected]
Binder Group PTY LTD (Victoria) 12 Wedgewood RdHallam VIC 3803Phone: +61 (0) 3 9702 4360Fax: +61 (0) 3 9796 5049Email: [email protected]
Binder Group PTY LTD (Queensland)2/11-13 Allan StreetLoganholme QLD 4129Phone: +61 (0) 7 3421 0222Fax: +61 (0) 7 3421 0299Email: [email protected]
A K E E S A F E T Y P R O D U C T
Binder Group’s building services range of products tailored for the HVAC&R industry. Binder Group is a privately owned company and has been in Australia for over 30 years and is a market leading manufactur-er / supplier of pipe and structural supports for the industrial resource sector, specialising in delivering quality locally designed solutions.
Binder Group brings you a Commercial Building Services range of Kwiksmart products designed to support every application for HVAC&R, Mechanical Services, Electrical, Refrigeration and Plumbing installers. Our leading Flagship product Ultrastrut Channel and Ultrastrut Canti-levers are revolutionising the way support infrastructure is designed and installed on commercial projects and day to day installations. To compliment Ultrastrut we are offering the ability to turnkey a project from specification through to expedition by working with distribution partners, contractors and consultants across all disciplines.
Binder Group’s unique value add proposition offers unrivalled, drafting, engineering and design support from consultant through to installer ensuring that our clients not only get a product but a “solution”
All Binder products can be sourced through Electrical, HVAC&R, Plumb-ing, and Fastener distributors.
To know more about where you can source Kwiksmart contact your local Binder office located in Victoria, QLD and Western Australia with offices opening in other states soon.
KWIKSMART and ULTRASTRUT YOUR SMARTER BUILDING SERVICES SOLUTION
Kwik-Smart 5
“Z” Shape FittingsFlat Plate Fittings
PE- Blocks
Punched Angles
US Trapeze Kit
Electrical FittingsBeamClamps
Reducers
Angle Fittings
Cantilever Brackets
Clips & Clamps
Post Base Fittings
Pipe Support
Concrete Inserts
Cable Ladder
Flat CrossFlat Bends
Test Plug BeamClamp®
Channel Closures
Binder Tray
TEE
Risers
Channel Nuts
Channels
Visual CONTENT
P8 - P15
P23 - P24
P26 - P28
P31 - P33
P34 - P43 P45- P47 P49- P52 P53- P54 P55- P73
P16 P17 P21 P22
P22
P25 P25
P23 P24
P29 P30
P30 P30 P30 P30
P24
Using the UltraSTEEL™ state-of-the-art metal forming technology we have improved the performance of 2.5mm standard compliant strut profiles.
The patented UltraSTEEL™ process improves the load bearing capacity of steel against a similar gauged metal, so we can make it both stronger and lighter.
The UltraSTEEL™ process improves
strenght.
BRITISH STANDARD COMPLIANT STRUT PROFILE LOWER PRICE
An UltraSTEEL™ product
It may look different, because of the UltraSTEEL™process, but UltraSTRUT™ is a direct replacementfor all BS compliant 41x41 and 41x21 strut channelsections in 2.5mm and fits all existing ancillarycomponents. We provide plain, slotted and B-to-Bconfigurations in pre-galvanised, post-galvanised,hot-rolled and stainless steel material, so there’s astrut for all your applications. All this means, thatwhen selecting UltraSTRUT™ you get to benefitfrom the cost savings without having to worry aboutperformance.
• BS 6946 : 1988 compliant• Fits all existing ancillary components• All standard materials and finishes available
A DIRECT REPLACEMENT INEVERY WAY
ENHANCE YOUR GREENCREDENTIALS
Easier to work with
UltraSTRUT™ uses less steel for any given length, which means less material is used. It also means lower transport related pollution and cost, with more lengths being carried on each load.
Being lighter, UltraSTRUT™ is easier to handle, lift and transport, so it helps reduce installation cost.
Lighter modulisationReduce weight in buildings with no loss of integrity
CHANNELS -
8
All Channels come in 6.0 meter lengths
Other finishes available upon request.
Key to finishesGB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
UltraSTRUT™
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 822 1.62 795 441 411 1.29 411 2761000 411 6.47 199 110 206 5.18 124 691500 274 14.56 88 49 137 11.65 55 312000 206 25.88 50 28 103 20.70 31 172500 164 40.44 32 18 82 32.35 20 113000 137 58.23 22 12 69 46.59 14 8
Plain 41X 41 mmUS 1000 [GB/ HDG]
US 1000 T [GB/ HDG] Slotted 41X 41 mm
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 884 1.47 884 522 441 1.18 442 3261000 442 5.88 235 130 221 4.71 147 821500 295 13.24 104 58 147 10.59 65 362000 221 23.53 59 33 110 18.82 37 202500 177 36.77 38 21 88 29.41 23 133000 147 52.94 26 14 74 42.35 16 9
CHANNELS
Kwik-Smart 9
When ordering, please quote Part Number for required size and surface finish.
Plain 41X 41 mm Size 2.5mm
Slotted 41X 41 mm
KS 1000 [GB/ HDG]
KS 1000 T [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 954 1.02 954 954 477 0.82 477 4771000 477 4.09 477 323 239 3.28 239 2021500 318 9.21 259 144 159 7.38 159 902000 239 16.37 145 81 119 13.12 91 512500 191 25.58 93 52 95 20.50 58 323000 159 36.84 65 36 80 29.52 40 22
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 887 1.12 887 887 443 0.90 443 4431000 443 4.50 443 273 222 3.60 222 1711500 296 10.12 213 121 148 8.11 137 762000 222 18.00 123 68 111 14.42 77 432500 177 28.12 79 44 89 22.53 49 273000 148 40.49 55 30 74 32.44 34 19
Size 2.5mm
CHANNELS -
10
All Channels come in 6.0 meter lengths
Other finishes available upon request.
Key to finishesGB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
UltraSTRUT™
Plain 41X 21 mmUS 3300 [GB/ HDG]
Slotted 41X 21 mmUS 3300T [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 293 2.78 165 91 147 2.23 103 571000 147 11.14 41 23 73 8.91 26 141500 98 25.06 18 10 49 20.04 11 62000 73 44.45 10 6 37 35.63 6 42500 59 69.60 7 4 29 55.68 4 23000 49 100.22 5 3 24 80.18 3 2
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 267 3.10 134 75 133 2.48 84 471000 133 12.41 34 19 67 9.93 21 121500 89 27.92 15 8 44 22.34 9 52000 67 49.63 8 5 33 39.71 5 32500 53 77.55 5 3 27 62.04 3 23000 44 111.68 4 2 22 89.34 2 1
CHANNELS
Kwik-Smart 11
When ordering, please quote Part Number for required size and surface finish.
Plain 41X 21 mmKS 3300 [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 330 2.14 330 214 165 1.71 165 134 1000 165 8.56 96 53 83 6.86 60 33 21500 110 19.26 43 24 55 15.43 27 15 2000 83 34.24 24 13 41 27.43 15 8 2500 66 53.50 15 9 33 42.87 10 5 3000 55 77.03 11 6 28 61.73 7 4
Slotted 41X 21 mmKS 3300T [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 308 2.42 308 177 154 1.94 154 1101000 154 9.69 79 44 77 7.76 50 281500 103 21.80 35 20 51 17.47 22 122000 77 38.76 20 11 39 31.06 12 72500 62 60.56 13 7 31 48.53 8 43000 51 87.21 9 5 26 69.88 6 3
Size 2.5mm
Size 2.5mm
CHANNELS -
12
All Channels come in 6.0 meter lengths
Other finishes available upon request.
Key to finishesGB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
UltraSTRUT™
Back to Back 41X 82 mmUS 1001 [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 2463 0.82 2463 2463 1231 0.66 1231 12311000 1231 3.30 1167 648 616 2.64 616 4051500 821 7.42 519 288 410 5.94 324 1802000 616 13.20 292 162 308 10.56 182 1012500 493 20.62 187 104 246 16.49 117 653000 410 29.69 130 72 205 23.75 81 45
Back to Back 41X 21 mmUS 3301 [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 267 3.10 134 75 133 2.48 84 471000 133 12.41 34 19 67 9.93 21 121500 89 27.92 15 8 44 22.34 9 52000 67 49.63 8 5 33 39.71 5 32500 53 77.55 5 3 27 62.04 3 23000 44 111.68 4 2 22 89.34 2 1
CHANNELS
Kwik-Smart 13
When ordering, please quote Part Number for required size and surface finish.
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 2766 0.59 2766 2766 1383 0.47 1383 13831000 1383 2.35 1383 1383 691 1.88 691 6911500 922 5.29 922 725 461 4.24 461 4532000 691 940 691 408 346 7.54 346 2552500 553 14.69 470 261 277 11.77 277 1633000 461 21.16 326 181 230 16.95 204 113
Back to Back 41X 82 mmKS 1001 [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 975 1.33 975 975 488 1.07 488 4881000 488 5.34 456 253 244 4.28 244 1581500 325 12.01 203 113 163 9.63 127 702000 244 21.36 114 63 122 17.11 71 402500 195 33.37 73 41 98 26.74 46 253000 163 48.06 51 28 81 38.51 32 18
Back to Back 41X 21 mmKS 3301 [GB/ HDG]
Size 2.5mm
Size 2.5mm
CHANNELS
14
All Channels come in 6.0 meter lengths
Other finishes available upon request.
Key to finishesGB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 574 0.96 1486 826 287 0.77 929 5161000 287 3.86 372 206 143 3.09 232 1291500 191 8.68 165 92 96 6.95 103 572000 143 15.42 93 52 72 12.36 58 322500 115 24.10 59 33 57 19.31 37 213000 96 34.70 41 23 48 27.81 26 14
Plain 41X 41 mm
Slotted 41X 41 mm
KS 2000 [GB/ HDG]
KS 2000T [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffec-tiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 538 0.90 1268 704 269 0.85 792 4401000 269 3.61 317 176 134 3.39 198 1101500 179 8.13 141 78 90 7.64 88 492000 134 14.45 79 44 67 13.58 50 282500 108 22.59 51 28 54 21.21 32 183000 90 32.52 35 20 45 30.55 22 12
Size 1.6mm
Size 1.6mm
CHANNELS
Kwik-Smart 15
When ordering, please quote Part Number for required size and surface finish.
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 170 2.21 193 107 85 1.77 120 671000 85 8.83 48 27 43 7.08 30 171500 57 19.87 21 12 28 15.92 13 72000 43 35.32 12 7 21 28.30 8 42500 34 55.19 8 4 17 44.22 5 33000 28 79.47 5 3 14 63.68 3 2
Plain 41X 21 mm
Slotted 41X 21 mm
KS 4000 [GB/ HDG]
KS4000T [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD CENTRALLY CONCENTRATED LOAD
SpanColumnEffectiveLength(mm)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)
Stress Limited Load &
Deflection
Deflection Limited Load
(Kg)Load(Kg)
Deflection(mm)
Span/200
Span/360
Load(Kg)
Deflection(mm)
Span/200
Span/360
500 159 2.06 157 87 79 2.02 98 551000 79 8.23 39 22 40 8.08 25 141500 53 18.52 17 10 26 18.17 11 62000 40 32.92 10 5 20 32.30 6 32500 32 51.45 6 3 16 50.48 4 23000 26 74.08 4 2 13 72.69 3 2
Size 1.6mm
Size 1.6mm
CHANNELS
16
ReferenceAxis X-X Axis Y-Y
Ixx cm4 Zxx cm3 Rxx cm Iyy cm3 Zyy cm3
Ryy cm Area cm2
KS3300 1.20 1.06 0.73 5.73 2.60 1.55 2.23KS3301 5.68 3.13 1.13 10.74 5.20 1.55 4.46KS3300T 0.99 0.73 5.31 2.57 1.68 1.88 7
CHANNEL AXIS DATA
CHANNEL CLOSURES
ReferenceAxis X-X Axis Y-Y
Ixx cm4 Zxx cm3 Rxx cm Iyy cm3 Zyy cm3
Ryy cm Area cm2
KS1000 7.25 3.25 1.49 9.25 4.48 1.69 325KS1001 36.59 9.42 2.37 18.50 8.96 1.69 6.50KS1000T 6.13 3.02 1.45 9.19 4.45 1.78 2.90
ReferenceAxis X-X Axis Y-Y
Ixx cm4 Zxx cm3 Rxx cm Iyy cm3 Zyy cm3
Ryy cm Area cm2
KS4000 0.60 0.59 0.67 2.95 1.50 1.49 1.33KS4000T 0.49 0.55 0.66 2.92 1.48 1.62 1.12
ReferenceAxis X-X Axis Y-Y
Ixx cm4 Zxx cm3 Rxx cm Iyy cm3 Zyy cm3
Ryy cm Area cm2
KS2000 4.63 2.07 1.50 6.08 2.94 1.72 2.06KS2000T 3.95 1.94 1.46 3.95 2.93 1.81 1.85
KS 1000 / 1001 / 1000T
KS 3300 / 3301 / 3300T
KS 2000 / 2000T
KS 4000 / 4000T
KS2240 KS4240 KS1184
Plain 62 X 41 mmKS 5500 [GB/ HDG]
UNIFORMLY DISTRIBUTED LOAD COLUMN LOADING DATASpanColumnEffec-tiveLength(mm)
Max. allowance
Deflection Limited Load
Max. allowance
Load(KN)
Deflection(mm)
Span/200
Lateral Load
600 22.9 1.0 22.9 24.91000 13.7 2.0 13.7 18.11500 9.2 5.0 9.2 12.32000 6.9 8.0 6.9 9.32500 5.5 13.0 5.5 7.73000 4.6 18.0 3.8 -
Size 2.5mm
All Channels come in 6.0 meter lengths
Other finishes available upon request.
Key to finishesGB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
Kwik-Smart 17
KS1000 KS3300
Point Load (250 mm centres)
750 Kgs
550 Kgs
Continuous Load(per 1000mm)
2200 Kgs
3000 Kgs
Concrete Strength 32MN/M2
CONCRETE INSERTS (Manufactured to Order)
Concrete Inserts are available in standard lengths of 3 and 6 metres which are supplied com-plete with polystyrene infill and End Caps in place. Non-standard lengths can be supplied in increments of 200mm. For shorter lengths, please consult our technical/sales department.
Concrete Inserts are manufactured from standard channel sections KS1000 and KS3300. The inclusion of Concrete Inserts into walls, floors, ceilings and ducts etc. at the initial stages of construction provides a flush surface for fixing and supporting electrical and mechanical services.
Material :BS 1449 HR4 PO Z25 EN10147:1992FE250 - G275 PGRolling Tolerance to BS 2994
Strength :32N/M2 Finished : HDG = BS 729
Recommended LoadingsResults prepared from tests carried out by the department of Civil Engineering at the University of Birmingham
END CAP. If site installation requires concrete insert to be cut, end caps MUST be re-inserted at each end.
41 x 41 x 2.5g Weight:- 2.64 Kg/M
Nail to shutteringbefore pouring
Removepolystyrene
Insert channel nut and secure bracket
41 x 21 x 2.5g Weight:- 1.84 Kg/M
Drawings not to scaleAll dimensions in mm
18
CHANNEL technical DATA
The following materials are used In the manufacture of Hi-Strut channels: 1. Pre-Galvanised (PG) BSEN 10147: 1992, S280 GD + Z275.2. Hot Rolled Pickled & Oiled (HRPO) BS 1449: 1991.3. Post Galvanised (HDG) BS 1449: 1991, BS 729.4. Stainless Steel (SS) BSEN 10088-2: 1995, 316L X2CrNiMo17-12-2.
1. All loads are calculated in accordance with BS5950:Part 5: 1998 Code of Practice, for the design of cold formed sections.
2. The minimum yield stress of pre-galvanised steel used in the manufacturer of Hi-STRUT channels is Ys = 250 N/mm2.
3. Beam loads and corresponding deflections are calculated using a yield of 250 N/mm2. These values are calculated in accordance with section 3.4 of BS5950:Part 5.
4. All beam loads and deflections stated do not apply to material that has been post galvan-ised i.e. (heat treatment has been applied af-ter forming). If beam loads and deflections are required for post galvanised products please contact, the manufacturer.
5. A global safety factor of 1.6 was used to determine safe working loads from limited state analysis.
6. Column loads are calculated in accordance with section six BS5950:Part 5. Effective col-umn lengths to be determined by the designer in accordance with Table 9 BS5950:Part 5.
7. Column loads have been calculated so that the maximum slenderness ratio Le/r does not exceed 180°.
8. Beams are assumed to be simply support-ed and provide adequate lateral restraint over the given span.
9. Beam loads are applied through the shear of the section in the direction indicated in the tables.
10. Alternative beam safe load tables are pro-vided for a uniformly distributed load or con-centrated near the centre of the span. (See Figure 1.).
11. Example of how to evaluate the ultimate load on an intermediate span. Extract from the S100 Load Table not shown in tables.
Channel Load Table Assumptions:
Material and Finish Standards:
CalculationSpan (mm)(a) 500(e) 825 = New Intermediate Span(b) 1000
Load (Kg)(c) 954 for 500 span(d) 477 for 1000 span
Find the ultimate load at a span of 825mm, using the following formula.
New Ultimate Load = New Ultimate Load =
= 643.95kg
Channel Load Table
{[ {[(954-477) (825-500)(1000-500) X954 -{[ {[(c-d)
(c-a)(b-a) XC -
Kwik-Smart 19
Ultrastrut CHANNEL PRODUCT TESTINGTest ObjectiveTo determine the ultimate load capacity of the UltraStrut product to BS6946:1988 using both pull out and slip criteria. The criteria for the pull out test requires that the ultimate failure force must be a minimum of three times the safe working pull out load published by the manufacturer.
The criteria for the slip test requires the force needed to give a continuous slip must be no less than three times the safe working slip load published by the manufacturer.
Pull Out TestThis test involves the M12 nut fixing being done up to 70Nm torque and pulled vertically from a 300mm strut lying horizontally. The strut must be secured to a rigid structure giving a free length of channel 100mm long, and the fixing pulled vertically away from it until the strut breaks. As shown in figure .
Slip TestThis test also involves the M12 nut fixing being tightened to 70Nm but this time the strut is mount-ed vertically and the fixing being pushed down the length of strut, measuring the maximum force needed to do this. As shown in figure.
Specimen Maximum Force (N)1 255632 281433 269744 266115 251756 24470Mean 26156
Specimen Maximum Force (N)1 155402 126563 125084 14525Mean 13807
Test Results
Test Results
Test Procedure
20
CHANNEL PRODUCT TESTING - Pull ApartPull Apart Spot Weld TestThis test involves the standard 41mm x 82 mm x 2.5 mm back to back channels and is carried out in accordance with ISO 9001:2008 quailty standards. Data listed in PSI (Pound per inch) and is the force required to initally start to separate the weld spots on the back to back channels. Please refer to image below.
Test Number 41mm x 82mm x 2.5mm Plain Channel 41mm x 82mm UltraSTRUT Channel1 2050PSI 1800PSI2 2100PSI 1750PSI3 2100PSI 1750PSI4 2100PSI 1750PSI5 2150PSI 1800PSI6 2050PSI 1800PSI7 2100PSI 1700PSI8 2050PSI 1700PSI9 2050PSI 1750PSI10 2100PSI 1800PSI11 2100PSI 1800PSI12 2100PSI 1850PSIAverage 2088PSI 1767PSI
Test Results
Kwik-Smart 21
When ordering, please quote Part Number for required size and surface finish.
Kit Includes:2 off Cantilever Bracket2 off Plastic End Caps8 off M10 Flat Washers4 off M10 Channel Spring Nuts4 off M10 x 30 mm Set ScrewsWall fixings available on request
Standard Offering:Is UltraSTRUT 2.5mmAvaliable on Request
Part No. Lengthmm
Max LoadUniformaly Distributed
UB150 150 815UB300 300 450UB450 450 315UB600 600 225UB750 750 175
Part No. Lengthmm
Max LoadUniformaly Distributed
UB150 Kit 150 815UB300 Kit 300 450UB450 Kit 450 315UB600 Kit 600 225UB750 Kit 750 175
Part No. Lengthmm
Max LoadUniformaly Distributed
BC150 150 900BC300 300 780BC450 450 530BC600 600 390BC750 750 320
Part No. Lengthmm
Max LoadUniformaly Distributed
BC150 Kit 150 900BC300 Kit 300 780BC450 Kit 450 530BC600 Kit 600 390BC750 Kit 750 320
UB150 - UB750 [HDG / SS]
BC150 - BC750 [HDG / SS]
Cantilever Bracket Un-Braced
CANTILEVER BRACKETs
Cantilever Bracket Braced
Cantilever Bracket Kit
BracedUn-Braced
Binder Group offers an exclusive range of Australian made Cantilever Brackets construct-ed from our revolutionary Ultrastrut channel. By doing this our range of braced and non-braced cantilevers offers the installer:
• A lighter weight cantilever with the same struc-tural integrity as much heavier 2.5mm Cantile-vers.
• Slotted horizontals to stop dust and water build up.
Over and above an easier and more cost effec-tive installation for the contractor with a unique aesthetic appeal.
22
When ordering, please quote Part Number for required size and surface finish.
Part No. Height (D)
Width (E)
Thick-ness
Slot Length
KS240-0* 30 30 2.5 11 x 25 3000KS240-1 40 40 3 8 x 25 3750KS240-2 40 40 5 8 x 25 3750KS240-4 40 40 3 11 x 25 3000KS240-5 40 40 5 11 x 25 3750
Part No. Description
TK-150 150mmTK-300 300mmTK-450 450mmTK-600 600mmTK-750 750mm
Part No. Width (E) Thick-ness
Slot Length
KS246-1 40 5 8 x 25 3000KS246-2 40 5 11 x 25 3000
•Supplied in 3750mm lengths.•Other sizes available on order.Note:*240-0 supplied in Zinc Plated finish.*240-0 supplied in 3000mm lengths.
•Supplied in 3.0 mm lengths.•Other sizes available on order.
Slotted Angle [HDG]
UltraSTRUT Trapeze Kit
Slotted Flat Bar [HDG]HANGER FITTINGS AND PUNCHED ANGLE
Kit Includes:UltraSTRUT Channel(cut to required size) 2 Threaded Rod6 Washer6 Nuts
CHANNEL FITTINGS
Kwik-Smart 23
When ordering, please quote Part Number for required size and surface finish.
KS1062- KS1964
Part No.
Bolt Size
Hole Size
Masskg/100
KS1062 08 9 7.0KS1063 10 12 6.8KS1064 12 14 6.6KS1964 16 18 6.4
KS1026
KS1941
KS1186/2106/2108
KS1066
KS1325
KS1031
KS1065
KS1326
KS1036
KS1038
KS1067
KS2484
KS1358
KS1037KS2101/2103
Flat Plate Fittings
Angle Fittings
Other finsihes available upon request.
Channel Fittings Key to finishes:GB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
CHANNEL FITTINGS
24
KS1034KS1035
KS1045
KS2072A
KS1033
KS1047
KS2073
KS1359
KS4045
KS2072B
KS1357
KS4047
Angle Fittings
Post Base
“Z” Shape Fittings “U” Shape Fittings
When ordering, please quote Part Number for required size and surface finish.Other finsihes available upon request.
Channel Fittings Key to finishes:GB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
CHANNEL FITTINGS
Kwik-Smart 25
When ordering, please quote Part Number for required size and surface finish.
KS2785
KS1796
KS2855
KS1379
KS2676
KS2377
Flange Clamp Z/P
KS0615
KS1272
KS1386
KS3016
KS1271
Beam Clamps
Electrical Fittings
Other finsihes available upon request.
Channel Fittings Key to finishes:GB= Galvanised BondHDG =Hot Dip Galvanised
SS=Stainless Steel
Binder Tray
26
Binder Tray - BT3
BT3 - Application
Part No. DescriptionBT3-150 BT3 Cable Tray 150mm GBBT3-300 BT3 Cable Tray 300mm GBBT3-450 BT3 Cable Tray 450mm GBBT3-600 BT3 Cable Tray 600mm GBBT3-HDB BT3 Hold Down Bracket GBBT3-LP BT3 Link Plate GBBT3-RP BT3 Radius Plate GBBT3-SP BT3 Splice Plate GBBT3-TX BT3 TX Bracket GB
Splice Plate
Riser Links
Nut & Bolt
Divider Strip
TX Bracket
Application 1 Application 2
Application 3 Application 4
Radius Plate
Trapeze Bracket
Hold Down Bracket
Binder Tray
Kwik-Smart 27
Binder Tray - BT5
BT5 - Application
Part No. Max LoadUniformaly Distributed
BT5-150 BT5 Cable Tray 150mm GBBT5-300 BT5 Cable Tray 300mm GBBT5-450 BT5 Cable Tray 450mm GBBT5-600 BT5 Cable Tray 600mm GBBT5-HDB BT5 Hold Down Bracket GBBT5-LP BT5 Link Plate GBBT5-RP BT5 Radius Plate GBBT5-SP BT5 Splice Plate GBBT5-TX BT5 TX Bracket GB
Splice Plate
Riser Links
Nut & Bolt
Divider Strip
TX Bracket
Application 1 Application 2
Application 3 Application 4
Radius Plate
Hold Down Bracket
Binder Tray
28
BT3- LOAD RATING AND DEFLECTION
BT5- LOAD RATING AND DEFLECTION
Binder cable ladder
Kwik-Smart 29
When ordering, please specify required type, width and surface finish.
NEMA 12B CABLE LADDER
NEMA 16A CABLE LADDER
NEMA 20C CABLE LADDER
• Standard Length 3.0 metres and 6.0 metres.• Standard FInish HDG• Other Finishes available on request.• Rung Spacing 300mm.• Standard Width : 150mm. 300mm, 450mm,
600mm.• Load Data - 3 metre simple beam 125kg/m. - 6 metre simple beam 31 kg/m.
(Note design working load is distributed laterally and longitudially over the span with a factor of safety of 2.)
Binder Group distributes a comprehensive range of Nema Cable ladders for the ElectricalIndustry, load rated to NEMA Standard VE1.
All of Binder Group’s cable ladder offerings come with an extensive range of finishing components and joining hardware to cater for the smallest commercial applications to the largest of Industrial plant applications including but not limited to:
Risers, Tees, Crosses, Reducers, Hinged Horizontal and Vertical Splices, Adjustable Risers, Covers, Divider Strip, Adjustable Cantilever Support Brackets and Cable Clamps.
All of Binder Groups Nema cable ladder solutions are available in Steel, Hot dipped galvanized steel, Aluminium, Stainless, Epoxy painted steel or FRP fiberglass.
Binder Cable Ladder
“RI - Rail In Series
“RI - Rail In Series
“RO - Rail Out Series
“RO - Rail Out Series
Binder cable ladder
30
When ordering, please specify required type, width and surface finish.
Flat Bends
Reducers
Tee & Flat Cross
• All Bends are pre-punched for direct connection to cable ladder widths
• Bends availble in standard cable ladder widths.• Standard Finish HDG• Other Finishes available on request.
• All Reducers are pre-punched for direct con-nection to cable ladder widths
• Reducers availble in standard cable ladder widths.
• Standard Finish HDG• Other Finishes available on request.
• All Crosses and Tees are pre-punched for di-rect connection to cable ladder widths
• Crosses and Tees availble in standard cable ladder widths.
• Standard Finish HDG• Other Finishes available on request.
Risers• All Riser are pre-punched for direct connection
to cable ladder widths• Riser availble in standard cable ladder widths.• Standard Finish HDG• Other Finishes available on request.
External RiserInternal Riser
Righthand - Resucers
Lefthand - Resucers
Horizontal- TEE
Flat Cross
Straight - Resucers
CHANNEL NUTS
Kwik-Smart 31
When ordering, please quote Part Number for required size and surface finish.
For 41 x 41 Channels, with Spring
For 41 x 21 Channels, with Spring
For 41 x 62 Channels, with Spring
Slick Strut Nut
Flange Clamp Z/P Drilled Lock Nut
For 41 x 41 Channels, without Spring
For 41 x 21 Channels, without Spring
For 41 x 62 Channels, without Spring
Wedge Nut
Part No. SizeKS1006 M06KS1007 M08KS1008 M10KS1010 M12KS1012S M16
Part No. SizeKS4006 M06KS4007 M08KS4008 M10KS4010 M12KS4012S M16
Part No. SizeKS5508 M10KS5510 M12
Part No. SizeSN06 M06SN08 M08SN10 M10SN12 M12
Part No. SizeFC08 M08FC10 M10FC12 M12
Part No. SizeLN08 M08LN10 M10LN12 M12LN16 M16
Part No. SizeKS3016 M06KS3006 M06KS3007 M08KS3008 M10KS3010 M12KS3012 M16
Part No. SizeKS3016 M06KS3006 M06KS3007 M08KS3008 M10KS3013 M12KS4012 M16
Part No. SizeKS3016 M06KS3006 M06KS3007 M08KS3008 M10KS3010 M12KS3012 M16
Part No. SizeWDG08 M08WDG10 M10WDG12 M12
When ordering, please quote Part Number for required size and surface finish.
CHANNEL NUTS
32
When ordering, please quote Part Number for required size and surface finish.
Hex Nut CL.8 Zinc
Mud Guard Washers
Lock Washers
Drop in Anchor ZP
Flat Washer CS Zinc
Spring WashersHex Head Set Screws
Part No. SizeHN06 M06HN08 M08HN10 M10HN12 M12HN16 M16
Part No.MW-1/4X3/4MW-1/4X1MW-1/4X1 1/4MW-3/8X1 1/4
Part No. SizeLW06 M06LW08 M08LW10 M10LW12 M12LW16 M16
Part No. SizeDIA0625 M06DIA0825 M08DIA1030 M10DIA1040 M10DIA1050 M10DIA1250 M12
Part No. SizeFW06 M06FW08 M08FW10 M10FW12 M12FW16 M16
Part No. SizeSW06 M06SW08 M08SW10 M10SW12 M12SW16 M16
Part No. SizeHHS0620 M06HHS0625 M06HHS0650 M06HHS0825 M08HHS0839 M08HHS0840 M08HHS1020 M10HHS1025 M10HHS1030 M10HHS1040 M10HHS1045 M10HHS1050 M10HHS1060 M10HHS1225 M12HHS1230 M12HHS1240 M12HHS1250 M12HHS1260 M12HHS1280 M12HHS1640 M16HHS1650 M16HHS1660 M16HHS1665 M16
Hanger Bolts [ZP]
Part No.HB1080HB10100HB10120HB10140
CHANNEL NUTS
Kwik-Smart 33
When ordering, please quote Part Number for required size and surface finish.
Vertical Wall Plate [Z/P]
Horizontal Wall Plate [Z/P]
Wall Plate [Z/P]
‘C’ Purlin Clip [Z/P]
Hex Connector [Z/P, HDG - POA]
Female Wall Plate [Z/P]
Suspension Eye [Z/P]
‘Z’ Purlin Clip [Z/P]
Clevis Hanger [HDG]
Threaded Rod R/H Zinc Gr.4.6
Part No. SizeTR06 M06TR08 M08TR10 M10TR12 M12TR16 M16
Part No. SizeVWP10 M10VWP12 M12
Part No. SizeHWP10 M10HWP12 M12
Part No. SizeWP10 M10
Part No. SizeCPC10 M10
Part No. SizeHC10 M10
HC12 M12
HC16 M16
Part No. SizeFWP10 M10FWP12 M12
Part No. SizeSE10 M10
Part No. SizeZPC10 M10
Part No. SizeCH10 M10CH12 M12
When ordering, please quote Part Number for required size and surface finish.
CLIPS & CLAMPS
34
When ordering, please quote Part Number for required size and surface finish.
•Includes nut and screw•Fits standard strut channel•Also Available in Hot Dip Galvanised or Stain-less Steel
Part No. Dimensionmm
KS2024 08KS2025 11KS2026 14KS2027 17KS2028 19KS1111 21KS2029 22KS2030 25KS1112 27KS2031 29KS2032 32KS1113 34KS2033 35KS2034 38KS1114 42KS2036 44KS1115 48KS2037 49KS2038 51KS2039 54KS2040 57KS1117 60KS2042 64KS2043 67KS2044 70KS1118 73KS2046 76KS2047 79KS2048 83KS2049 86KS1119 90
Part No. Dimensionmm
KS2051 92KS2052 95KS2053 98KS1120 102KS2055 105KS2056 108KS2057 111KS1121 114KS2059 117KS2060 121KS2061 123KS2062 127KS2063 130KS2064 133KS2065 136KS2066 140KS2067 143KS2068 146KS2069 149KS2070 152KS2070-62 159KS2070-64 165KS2070-66 171KS2070-70 178KS2070-72 184KS2070-74 191KS2070-76 197KS2070-80 203KS2070-84 216KS2070-90 232KS2070-110 315
KS2024 Series Channel Clips (ZP/HDG/SS)
When ordering, please quote Part Number for required size and surface finish.
Note: When used in the application illustrated it is recommended that the lower clamp be supported against possible slippage.
KS1064Bracket
Load
CLIPS & CLAMPS
Kwik-Smart 35
When ordering, please quote Part Number for required size and surface finish.
CCC Series Channel Clip
CCP Series Channel Clip
Channel Clip for Copper Pipe
• Channel Clip sizes 15mm to 300mm• Standard finish Powder Coated Brown• Fits standard channel.
Channel Clip for PVC Pipe
• Channel Clip sizes 40mm to 375mm• Standard finish Powder Coated White• Fits standard channel.
Part No. Product DescriptionCCC-15 15Cu Channel Clip CCC-20 20Cu Channel Clip CCC-25 25Cu Channel Clip CCC-32 32Cu Channel Clip CCC-40 40Cu Channel Clip CCC-50 50Cu Channel Clip CCC-65 65Cu Channel Clip CCC-80 80Cu Channel Clip CCC-100 100Cu Channel Clip CCC-125 125Cu Channel Clip CCC-150 150Cu Channel Clip CCC-200 200Cu Channel Clip
Part No. Product DescriptionCCP-40 40PVC Channel Clip CCP-50 50PVC Channel Clip CCP-65 65PVC Channel Clip CCP-80 80PVC Channel Clip CCP-90 90PVC Channel Clip CCP-100 100PVC Channel Clip CCP-150 150PVC Channel Clip CCP-225 225PVC Channel Clip CCP-300 300PVC Channel Clip CCP-375 375PVC Channel Clip
CLIPS & CLAMPS
36
When ordering, please quote Part Number for required size and surface finish.
PCP Series Channel Clip
BSC Series Channel Clip
Channel Clip for Pressure PVC Pipe
• Channel Clip sizes 15mm to 250mm• Standard finish Powder Coated White• Fits standard channel.
Binsul Clamp
• Insulates against heat loss and gain.• Reduces Vibration.• Temperature range - 30 0 C to 1250 C.• Fits standard channel.
Part No. Product Description PCP-15 15PVC Pressure Channel Clip PCP-20 20PVC Pressure Channel Clip PCP-25 25PVC Pressure Channel Clip PCP-32 32PVC Pressure Channel Clip PCP-40 40PVC Pressure Channel Clip PCP-50 50PVC Pressure Channel Clip PCP-65 65PVC Pressure Channel Clip PCP-80 80PVC Pressure Channel Clip PCP-100 100PVC Pressure Channel Clip
Part No. Imperial Pipe SizeInches
Pipe Diametermm
BSC-1/4 1/4 6.35 BSC-3/8 3/8 9.53 BSC-1/2 1/2 12.70 BSC-5/8 5/8 15.88 BSC-3/4 3/4 19.05 BSC-7/8 7/8 22.23 BSC-1 1/8 1 1/8 28.58 BSC-1 3/8 1 3/8 34.93 BSC-1 5/8 1 5/8 42.75 BSC-2 1/8 2 1/8 53.98 BSC-2 5/8 2 5/8 66.68 BSC-3 1/8 3 1/8 79.38 BSC-3 5/8 3 5/8 92.08
CLIPS & CLAMPS
Kwik-Smart 37
When ordering, please quote Part Number for required size and surface finish.
• Suitable for Steel, Copper or PVC pipe from 15NB to 150NB.• Finish must be stated.
• Smooth inner surface to allow pipe to move.• Plastic Spacers prevent over tightening.• Suitable for HDPE pipe from 25mm to 150mm.
Part No. Pipe sizeNB
Pipe ODmm
Size Rangemm
Box Qty
KS10-15 15 Cu 12.7 12-14 150KS10-20 20 Cu 19 15-19 150KS10-25 25 Cu 25.4 24-26 100KS10-32 32 Cu 31.8 30-33 50KS10-40 40 Cu / PVC 38.1 38-41 50KS10-50 50 Cu / PVC 51.2 50-56 50KS10-65 65 Cu 63.5 63-67 50KS10-65A 65 PVC 69.1 70-73 50KS10-80 80 Cu / PVC 76.2 74-80 50KS10-100 100 Cu 101.6 101-106 25KS10-100A 100 PVC 110.4 108-114 25KS10-150 150 PVC 160.5 159-164 20
Material : Carbon Steel / Stainless Steel. Finish : Zinc /Mill
Material : Carbon Steel. Finish : Zinc.
Part No. Pipe SizeNB
Size Rangemm
KS12-25 25 HDPE 25-28 KS12-32 32 HDPE 31-35 KS12-40 40 HDPE 38-43 KS12-50 50 HDPE 48-53 KS12-63 63 HDPE 64-67 KS12-75 75 HDPE 73-78 KS12-90 90 HDPE 86-91 KS12-110 110 HDPE 108-116 KS12-160 160 HDPE 158-163
KS10 Kwik Clips
KS12 Dual Clip ( for Plastic Pipe)
CLIPS & CLAMPS
38
When ordering, please quote Part Number for required size and surface finish.
Nut Clip For Copper Pipe
Nut Clip For PVC Pipe
Pressure Pipe Clip
Filbows
Part No. Description NC15-C 15Cu Nut Clip NC20-C 20Cu Nut Clip NC25-C 25Cu Nut Clip NC32-C 32Cu Nut Clip NC40-C 40Cu Nut Clip NC50-C 50Cu Nut Clip NC65-C 65Cu Nut Clip NC80-C 80Cu Nut Clip NC100-C 100Cu Nut Clip NC125-C 125Cu Nut Clip NC150-C 150Cu Nut Clip
Part No. Description NC40-P 40PVC Nut Clip NC50-P 50PVC Nut Clip NC65-P 65PVC Nut Clip NC80-P 80PVC Nut Clip NC90-P 90PVC Nut Clip NC100-P 100PVC Nut Clip NC150-P 150PVC Nut Clip
Part No. Description KS109-40 40Press Pipe Clip KS109-50 50Press Pipe Clip KS109-80 80Press Pipe Clip KS109-100 100Press Pipe Clip KS109-150 150Press Pipe Clip KS109-200 200Press Pipe Clip KS109-250 250Press Pipe Clip KS109-300 300Press Pipe Clip
• Nut clip sizes 15mm to 150mm.• Cup head fastener.• Double bolted.• Suits M10 Rod.• Standard finsih powder coated brown.
• Nut clip sizes 40mm to 150mm.• Cup head fastener.• Double bolted.• Suits M10 Rod.• Standard finsih powder coated white.
• Nut clip sizes 40mm to 150mm.• Cup head fastener.• Double bolted.• Suits M10 Rod.• Standard finsih powder coated white.
Part No. Description FB40-P 40PVC Filbow FB50-P 50PVC Filbow FB65-P 65PVC Filbow FB80-P 80PVC Filbow FB100-P 100PVC Filbow FB150-P 150PVC Filbow FB225-P 225PVC Filbow FB300-P 300PVC Filbow
• Yoke clamp sizes 40mm to 300mm.• Standard finsih powder coated white.
CLIPS & CLAMPS
Kwik-Smart 39
When ordering, please quote Part Number for required size and surface finish.
Yoke Clamp for Copper Pipe
Yoke Clamp For PVC Pipe [M08]
Yoke Clamp For PVC Pipe [M12]
Part No. Description YC50-P8 50PVC Yoke Clamp YC80-P8 80PVC Yoke Clamp
• Yoke clip sizes 15mm to 100mm.• Adjustable yoke 48mm to 65mm.• Double bolted.• Suits up to M8 Rod.• Standard finsih powder coated white.
Part No. Description YC20-C 20Cu Yoke Clamp YC25-C 25Cu Yoke Clamp YC32-C 32Cu Yoke Clamp YC40-C 40Cu Yoke Clamp YC50-C 50Cu Yoke Clamp YC65-C 65Cu Yoke Clamp YC80-C 80Cu Yoke Clamp YC100-C 100Cu Yoke Clamp YC125-C 125Cu Yoke Clamp YC150-C 150Cu Yoke Clamp
• Yoke clamp sizes 20mm to 300mm.•Adjustable yoke 48mm to 65mm.• Double bolted.• Suits up to M12 Rod.• Standard finsih powder coated brown.
Part No. Description YC40-P 40PVC Yoke Clamp YC50-P 50PVC Yoke Clamp YC65-P 65PVC Yoke Clamp YC80-P 80PVC Yoke Clamp YC100-P 100PVC Yoke Clamp YC150-P 150PVC Yoke Clamp YC225-P 225PVC Yoke Clamp YC300-P 300PVC Yoke Clamp
• Yoke clamp sizes 40mm to 300mm.•Adjustable yoke 48mm to 65mm.• Double bolted.• Suits up to M12 Rod.• Standard finsih powder coated white.
CLIPS & CLAMPS
40
When ordering, please quote Part Number for required size and surface finish.
BG100 - Light Duty 2-Bolt Pipe Clamp
•Also avaliable in stainless steel, zinc or powder coated white.
Material : Carbon Steel. Finish : HDG.
Part No. Steel Pipe Size
Pipe OD
Material WxT
BG100-15 15 NB 21.3 25 x 3 BG100-20 20 NB 26.7 25 x 3 BG100-25 25 NB 33.4 25 x 3 BG100-32 32 NB 42.2 32 x 3 BG100-40 40 NB 48.3 32 x 3 BG100-50 50 NB 60 40 x 3 BG100-65 65 NB 76 40 x 3 BG100-80 80 NB 89 40 x 3 BG100-100 100 NB 114 40 x 3 BG100-125 125 NB 140 40 x 5 BG100-150 150 NB 168 40 x 5 BG100-200 200 NB 220 50 x 6 BG100-225 225 NB 245 50 x 6 BG100-250 250 NB 273 50 x 6 BG100-300 300 NB 324 50 x 10 BG100-350 350 NB 356 65 x 10 BG100-400 400 NB 406 65 x 12 BG100-450 450 NB 457 75 x 16 BG100-500 500 NB 508 75 x 16 BG100-600 600 NB 610 75 x 16 BG100-750 750 NB 762 90 x 20 BG100-900 900 NB 914 100 x 25
Part No. Copper Tube Size
Pipe OD
Materail WxT
BG100-50CU 50 CU 51 32 x 3 BG100-65CU 65 CU 63 40 x 3 BG100-80CU 80 CU 76 40 x 3 BG100-100CU 100 CU 102 40 x 3 BG100-125CU 125 CU 127 40 x 5 BG100-150CU 150 CU 152 40 x 5 BG100-200CU 200 CU 255 40 x 5 BG100-250CU 250 CU 257 50 x 6 BG100-300CU 300 CU 304 50 x 6
Part No. PVC Pipe Size
Pipe OD
Material WxT
BG100-40PP 40PP 48 32 x 3 BG100-50PP 50 PP 56 32 x 3 BG100-65PP 65 PP 69.1 40 x 3 BG100-80PP 80 PP 82.7 40 x 3 BG100-100PP 100 PP 114 40 x 3 BG100-150PP 150 PP 160 40 x 5 BG100-200PP 200 PP 225 50 x 6 BG100-225PP 225 PP 251 50 x 6 BG100-250PP 250 PP 281 50 x 6 BG100-300PP 300 PP 315 50 x 6
CLIPS & CLAMPS
Kwik-Smart 41
When ordering, please quote Part Number for required size and surface finish.
• HDPE sizes also available.• Copper tube should be isolated from galvanised steel.• Avaliable in powder coated finish.
Material : Carbon Steel. Finish : HDG.
Part No. Copper Pipe Size Bolt Hole Diameter
MaterialNormal
SizeOutside
DiameterW x T
BG105-15CU 15 CU 12.7 8 25 x 3 BG105-20CU 20 CU 19 8 25 x 3
BG105-25CU 25 CU 25.4 8 25 x 3 BG105-32CU 32 CU 31.8 8 25 X 3 BG105-40CU 40 CU 38.1 11 32 x 3 BG105-50CU 50 CU 51.2 11 32 X 3 BG105-65CU 65 CU 63.5 14 40 x 3 BG105-80CU 80 CU 76.2 14 40 x 3 BG105-100CU 100 CU 101.6 14 40 x 3 BG105-125CU 125 CU 152.4 14 40 x 5
Part No. Steel Pipe Size Bolt Hole
Diame-ter
Material Normal
SizeOutside
DiameterW x T
BG105-15NB 15 NB 21 8 25 x 3 BG105-20NB 20 NB 27 8 25 x 3 BG105-25NB 25 NB 34 8 25 x 3BG105-32NB 32 NB 43 11 32 X 3 BG105-40NB 40 NB 48 11 32 x 3 BG105-50NB 50 NB 60 11 32 X 3 BG105-65NB 65 NB 75 14 40 x 3 BG105-80NB 80 NB 89 14 40 x 3 BG105-100NB 100 NB 114 14 40 x 3 BG105-150NB 150 NB 768 14 40 x 5 BG105-200NB 200 NB 220 18 50 x 6 BG105-225NB 225 NB 245 18 50 x 6 BG105-250NB 250 NB 273 18 50 x 6
Part No. PVC Pipe Size Bolt Hole
Diame-ter
Material Normal
SizeOutside
DiameterW X T
BG105-50PVC 50 PVC 59 11 32 x 3BG105-65PVC 65 PVC 69.1 14 40 x 3 BG105-80PVC 80 PVC 82.7 14 40 x 3BG105-100PVC 100 PVC 110.4 14 40 x 3BG105-150PVC 150 PVC 160.5 14 40 x 5
BG105 Saddle Guide
CLIPS & CLAMPS
42
When ordering, please quote Part Number for required size and surface finish.
BG106 Saddle Clamp
When ordering, please quote Part Number for required size and surface finish.
• HDPE sizes also available.• Copper tube should be isolated from galvanised steel.• Avaliable in powder coated finish.
Material : Carbon Steel. Finish : HDG.
Part No. Copper Pipe Size Bolt Hole Diameter
MaterialNormal
SizeOutside
DiameterW x T
BG106-15CU 15 CU 12.7 8 25 x 3 BG106-20CU 20 CU 19 8 25 x 3
BG106-25CU 25 CU 25.4 8 25 x 3 BG106-32CU 32 CU 31.8 8 25 X 3 BG106-40CU 40 CU 38.1 11 32 x 3 BG106-50CU 50 CU 51.2 11 32 X 3 BG106-65CU 65 CU 63.5 14 40 x 3 BG106-80CU 80 CU 76.2 14 40 x 3 BG106-100CU 100 CU 101.6 14 40 x 3 BG106-125CU 125 CU 152.4 14 40 x 5
Part No. Steel Pipe Size Bolt Hole
Diame-ter
Material Normal
SizeOutside
DiameterW x T
BG106-15NB 15 NB 21 8 25 x 3 BG106-20NB 20 NB 27 8 25 x 3 BG106-25NB 25 NB 34 8 25 x 3BG106-32NB 32 NB 43 11 32 X 3 BG106-40NB 40 NB 48 11 32 x 3 BG106-50NB 50 NB 60 11 32 X 3 BG106-65NB 65 NB 75 14 40 x 3 BG106-80NB 80 NB 89 14 40 x 3 BG106-100NB 100 NB 114 14 40 x 3 BG106-150NB 150 NB 768 14 40 x 5 BG106-200NB 200 NB 220 18 50 x 6 BG106-225NB 225 NB 245 18 50 x 6 BG106-250NB 250 NB 273 18 50 x 6
Part No. PVC Pipe Size Bolt Hole
Diame-ter
Material Normal
SizeOutside
DiameterW X T
BG106-50PVC 50 PVC 59 11 32 x 3BG106-65PVC 65 PVC 69.1 14 40 x 3 BG106-80PVC 80 PVC 82.7 14 40 x 3BG106-100PVC 100 PVC 110.4 14 40 x 3BG106-150PVC 150 PVC 160.5 14 40 x 5
CLIPS & CLAMPS
Kwik-Smart 43
When ordering, please quote Part Number for required size and surface finish.
BG107 U Bolt Clamp Light Duty
BG107 U Bolt Clamp
• Other sizes available on order.• Mill finish available by request.• Comes with 2 hex nuts.
• Other sizes available on order.
Material : Carbon Steel / Stainless Steel. Finish : HDG / Mill.
Material : Carbon Steel / Stainless Steel. Finish : ZP / Mill.
Part No. Pipe Size ThreadSize
Centres Height to inside
Normal Size
Outside Diame-
ter
mm mm
BG107-15 15 NB 21.3 M10 31 67 BG107-20 20 NB 26.7 M10 37 77 BG107-25 25 NB 33.4 M10 44 85 BG107-32 32 NB 42.2 M10 53 92 BG107-40 40 NB 48.3 M10 58 100 BG107-50 50 NB 60.3 M10 70 110 BG107-80 80 NB 88.9 M12 101 140 BG107-100 100 NB 114.3 M12 126 165 BG107-125 125 NB 141.3 M12 152 187 BG107-150 150 NB 168.3 M12 180 220 BG107-200 200 NB 219.1 M16 236 295 BG107-250 250 NB 273.0 M20 293 340
Part No. DiameterCentres Hight to
insidemm mm
BG107CON-20 U-Bolt 20mm 28 40 BG107CON-25 U-Bolt 25mm 34 44 BG107CON-30 U-Bolt 30mm 42 51 BG107CON-40 U-Bolt 40mm 50 60BG107CON-50 U-Bolt 50mm 60 70
Material Cross-Linked Closed Cell PE Foam
Density 300 Kg/m2Moisture Absorption(by weight, room temp, 5hrs)
<1%
Tensile Strength 26.4 Kg/m2Tear Strength 8.3 Kg/m2Thermal Conductivity(ISO 6302-1991)
0.065
Constant WorkingTemperature
-40°c to 150°c
Compressive Strength JIS 6767 3.4 Kg/cm2
PE Poly BlockHot & Cold Pipe Supports
FEATURES– PE Block profile ensures an airtight finish– PE Block decreases installation time as it locks easily together– Closed cell so that it will not absorb moisture or degrade with time.– Made of high density PE Foam– Will not with pipe movement– AS1530.3 compliant foil faced– Made from recycled material and is recyclable
Built in LocOnce tightly taped, PE Block will pre-vent any air movement through the join. This is especially important in cold line applications to prevent poten-tial air condensation
Tough & DurablePE Block pipe supports are made of high density, crosslinked, closed cell polyethylene foam. As they are closed cell they absorb negligible moisture, and retain their insulation properties throughout the life of the installation.
Non Erosion with Pipe MovementPipes move with contraction and ex-pansion, eroding the ferrule. The tough PE foam will resist movement and pre-vent gap formation over time.
Health & SafetyAs the blocks are preformed there is no need for cutting, so there is no dust and no mess. They do not emit fibrous particles during installation or over time.
Performance LifePE Block is closed cell and unaffected by water and humidity. This ensures continual performance over the life of the installation.
Chemical ResistancePE Block is resistant to detergents, diluted acids, alkalis, alcohols, esters and fungi ensuring performance in even the most demanding applica-tions. PE Block is light weight and ex-tremely tough. Just place the two piec-es over the pipe, squeeze together
gently, and apply AS1530.3 approved foil tape ensuring complete coverage.
Compliance with BCA Fire Hazard PropertiesPE Block complies with the Building Code of Australia (BCA) specification C1.10 Fire hazard properties for mate-rials used in Class 2 - 9 buildings.
Quick, Easy & Safe ApplicationNo more cutting. This ensures a flat surface to butt insulation against, al-lowing a tight and secure joint. No fibre’s, no dust, no mess to clean up afterwards. No special face masks or gloves required.
Wall Thickness Available20 mm, 25 mm, 38 mm, 50 mm walls and made to order wall thickness and ID
Length Along PipeThe standard “on pipe” length is 50 mm. 75 mm is available on request.
Advantage to Installers
Technical Specification
PE POLY BLOCK
Kwik-Smart 45
When ordering, please quote Part Number for required size and surface finish.
FEATURES• PE Block profile ensures an airtight finish• PE Block decreases installation time as it locks easily together• Closed cell so that it will not absorb moisture or degrade with time.• Made of high density PE Foam• Will not with pipe movement• AS1530.3 compliant foil faced• Made from recycled material and is recyclable
19mm Wall Thickness
Part No. ID OD
PE-10X19X48 10ID 48ODPE-13X19X51 13ID 51ODPE-16X19X54 16ID 54ODPE-19X19X57 19ID 57ODPE-22X19X60 22ID 60ODPE-28X19X66 28ID 66ODPE-35X19X73 35ID 73ODPE-42X19X74 42ID 74ODPE-54X19X92 54ID 92ODPE-38X19X76 38ID 76ODPE-42X19X79 42ID 79ODPE-45X19X83 45ID 83ODPE-48X19X86 48ID 86ODPE-51X19X90 51ID 90ODPE-54X19X92 54ID 92ODPE-57X19X95 57ID 95ODPE-60X19X98 60ID 98ODPE-64X19X102 64ID 102ODPE-67X19X105 67ID 105ODPE-73X19X111 73ID 111ODPE-76X19X114 76ID 114OD
13mm Wall Thickness
Part No. ID OD
PE-10X13X35 10ID 35ODPE-13X13X38 13ID 38ODPE-16X13X42 16ID 42ODPE-19X13X44 19ID 44ODPE-22X13X48 22ID 48ODPE-25X13X51 25ID 51ODPE-28X13X54 28ID 54ODPE-32X13X57 32ID 57ODPE-35X13X60 35ID 60ODPE-38X13X64 38ID 64ODPE-42X13X67 42ID 67ODPE-45X13X70 45ID 70ODPE-48X13X73 48ID 73ODPE-51X13X76 51ID 76ODPE-54X13X79 54ID 79ODPE-57X13X83 57ID 83ODPE-60X13X86 60ID 86ODPE-64X13X90 64ID 90ODPE-67X13X92 67ID 92ODPE-73X13X98 73ID 98OD
PE-76X13X102 76ID 102 OD
PE Block
PE POLY BLOCK
46
25mm Wall ThicknessPart No. ID ODPE-10X25X60 10ID 60ODPE-13X25X68 13ID 68ODPE-16X25X64 16ID 64ODPE-19X25X77 19ID 77ODPE-22X25X73 22ID 73ODPE-25X25X80 25ID 80ODPE-28X25X79 28ID 79ODPE-32X25X86 32ID 86OD
PE-35X25X86 35ID 86ODPE-38X25X93 38ID 93ODPE-42X25X92 42ID 92ODPE-45X25X95 45ID 95ODPE-48X25X98 48ID 98ODPE-51X25X106 51ID 106ODPE-54X25X105 54ID 105ODPE-57X25X108 57ID 108ODPE-60X25X111 60ID 111ODPE-64X25X118 64ID 118ODPE-67X25X117 67ID 117ODPE-73X25X123 73ID 123ODPE-76X25X131 76ID 131ODPE-102X25X156 102ID 156OD
38mm Wall ThicknessPart No. ID ODPE-10X38X86 10ID 86ODPE-13X38X93 13ID 93OD
PE-16X38X92 16ID 92ODPE-19X38X106 19ID 106ODPE-25X38X106 25ID 106ODPE-32X38X118 32ID 118ODPE-38X38X118 38ID 118ODPE-51X38X131 51ID 131ODPE-64X38X144 64ID 144ODPE-76X38X156 76ID 156ODPE-102X38X182 102ID 182ODPE-127X38X207 127ID 207ODPE-152X38X234 152ID 234ODPE-22X38X98 22ID 98ODPE-28X38X104 28ID 104OD
50mm Wall ThicknessPart No. ID ODPE-10X50X108 10ID 108ODPE-13X50X118 13ID 118ODPE-16X50X114 16ID 114ODPE-19X50X131 19ID 131ODPE-25X50X131 25ID 131ODPE-32X50X144 32ID 144ODPE-38X50X144 38ID 144ODPE-51X50X156 51ID 156ODPE-64X50X168 64ID 168ODPE-76X50X182 76ID 182ODPE-102X50X202 102ID 202ODPE-127X50X232 127ID 232ODPE-152X50X258 152ID 258OD
PE Block
When ordering, please quote Part Number for required size and surface finish.
FEATURES• PE Block profile ensures an airtight finish• PE Block decreases installation time as it locks easily together• Closed cell so that it will not absorb moisture or degrade with time.• Made of high density PE Foam• Will not with pipe movement• AS1530.3 compliant foil faced• Made from recycled material and is recyclable
PE POLY BLOCK
Kwik-Smart 47
When ordering, please quote Part Number for required size and surface finish.
KS2600 Isolation Barrier
KS680001 Binder Sil Tape
Wood Block Cork Block
PE Block with Clip
Form barrier between copper tube and clip/channel
50mm x 20mm Roll 50mm x 10mm Roll •Available in all Pipe / Tube Diameters.•Available in Insulation Thickness from 10mm to 100mm.
FEATURES• PE Block profile ensures an airtight finish• PE Block decreases installation time as it locks easily together• Closed cell so that it will not absorb moisture or degrade with time.• Made of high density PE Foam• Will not with pipe movement• AS1530.3 compliant foil faced• Made from recycled material and is recyclable
19mm Wall ThicknessPart No. ODPEC-19X48 48ODPEC-19X51 51ODPEC-19X54 54ODPEC-19X54 54ODPEC-19X60 60ODPEC-19X64 64ODPEC-19X67 67ODPEC-19X70 70ODPEC-19X73 73ODPEC-19X76 76ODPEC-19X79 79ODPEC-19X83 83ODPEC-19X86 86ODPEC-19X90 90ODPEC-19X92 92ODPEC-19X95 95ODPEC-19X98 98OD
PEC-19X102 102ODPEC-19X105 105ODPEC-19X111 111ODPEC-19X114 114OD
25mm Wall ThicknessPart No. ODPEC-25X60 60ODPEC-25X64 64ODPEC-25X67 67ODPEC-25X70 70ODPEC-25X73 73ODPEC-25X76 76ODPEC-25X79 79ODPEC-25X83 83ODPEC-25X86 86ODPEC-25X90 90ODPEC-25X92 92ODPEC-25X95 95ODPEC-25X92 98ODPEC-25X102 102ODPEC-25X105 105ODPEC-25X108 108ODPEC-25X111 111ODPEC-25X114 114ODPEC-25X117 117ODPEC-25X123 123ODPEC-25X127 127OD
13mm Wall ThicknessPart No. ODPEC-13X35 35ODPEC-13X38 38ODPEC-13X42 42ODPEC-13X44 44ODPEC-13X48 48ODPEC-13X51 51ODPEC-13X54 54ODPEC-13X57 57ODPEC-13X60 60ODPEC-13X64 64ODPEC-13X67 67ODPEC-13X70 70ODPEC-13X73 73ODPEC-13X76 76ODPEC-13X79 79ODPEC-13X83 83ODPEC-13X86 86ODPEC-13X90 90ODPEC-13X92 92ODPEC-13X98 98ODPEC-13X102 102OD
PIPE SUPPORT
48
Pipe Expansion Data
Expansion chart for various pipe and tubes Metal and synthetics (plastic) pipes contract with cold and expand with heat. This particularly applies to heating and chilled water pipelines which are constantly exposed to tem-perature variations with the changes in ambient temperatures. Appropriate pipe supports should be selected which are able to swing or slide thus preventing a build up in tensile forces.
Example 1 :Copper tube (Cu) length of pipe run 30mDifference in temperature Δt (pipe temperature minus ambient air temperature) 50ºCPipe expansion 26mm
Note: In the case of plastic pipes in the above chart (PE, PP and PVC) the linear expansion reading has to be multiplied by a factor of 10
Example 2 :PVC pipe length of pipe run 40mDifference in temperature Δt (pipe temperature minus ambient air temperature) 40ºCPipe expansion 13mm x 10 = 130mm
Kwik-Smart 49
Plumbing Copper TubeTubeNominalSize
PipeO.D.
Pipe MassEmplykg/m
Pipe MassFull of Waterkg/m
MaximumSupport
Span
15 12.70 0.30 0.39 1.5020 19.00 0.52 0.75 1.5025 25.40 0.83 1.25 2.0032 31.80 1.05 1.72 2.5040 38.10 1.27 2.27 2.5050 51.20 1.70 3.57 3.0065 63.50 2.14 5.07 3.0080 76.20 3.42 7.60 3.00100 101.60 4.58 12.18 4.00150 152.40 8.58 25.86 4.00
PVC Soil / Strom Water PipePipeNominalSize
PipeO.D.
Pipe MassEmplykg/m
Pipe MassFull of Waterkg/m
MaximumSupport
Span
40 43.10 0.41 1.55 1.0050 56.00 0.59 2.62 1.0065 69.10 0.89 4.02 1.2080 82.70 1.15 5.69 1.20100 110.40 1.30 9.70 1.20150 160.50 3.02 21.12 1.20225 250.70 7.35 51.21 3.00300 315.90 11.82 81.15 3.00
HDPE - PPR PipePipeNominalSize
PipeO.D.
Pipe MassEmplykg/m
Pipe MassFull of Waterkg/m
Maximum Support Span
@ 20C
@80C
20 20.00 0.16 0.32 0.80 0.6025 25.00 0.24 0.49 0.85 0.7032 32.00 0.38 0.80 1.00 0.7040 40.00 0.61 1.27 1.10 0.8550 50.00 0.90 1.93 1.25 0.9063 63.00 1.44 3.09 1.40 1.0575 75.00 2.09 4.41 1.50 1.0590 90.00 2.98 6.34 1.65 1.15110 110.00 4.39 9.39 1.90 1.30
Refrigeration Copper TubeTubeNominalSize
PipeO.D.
Pipe MassEmplykg/m
Pipe MassFull of Waterkg/m
MaximumSupport
Span
1/4” 6.35 0.14 0.16 1.003/8” 9.53 0.22 0.27 1.001/2” 12.70 0.30 0.39 1.505/8” 15.88 0.38 0.54 1.503/4” 19.05 0.46 0.69 1.507/8” 22.23 0.55 0.88 1.501 1/8” 28.58 0.71 1.27 2.001 3/8” 34.93 0.87 1.73 2.501 5/8” 42.75 1.03 2.35 2.502 1/8” 53.98 1.36 3.50 3.002 5/8” 66.68 2.25 5.55 3.00
Steel Pipe to Schedule 40PipeNominalSize
PipeO.D.
Pipe MassEmplykg/m
Pipe MassFull of Waterkg/m
MaximumSupport
Span
15 21.30 1.26 2.00 2.0020 26.70 1.68 2.20 2.5025 33.40 2.50 3.00 3.0032 42.20 3.38 4.00 3.0040 48.30 4.05 4.90 3.5050 60.30 5.43 7.70 4.0065 76.00 8.62 12.00 4.5080 88.90 11.28 15.00 5.50100 114.30 16.06 25.00 6.00150 168.30 28.23 50.00 7.00200 219.10 42.49 74.00 8.50250 273.00 60.24 115.00 9.00300 323.90 73.76 150.00 10.00350 355.60 81.21 216.00 10.00400 406.40 93.13 264.00 10.50450 457.20 105.05 316.00 11.00500 508.00 116.97 272.00 12.00600 609.60 140.81 500.00 14.00
Pipe Size Details
PIPE SUPPORT
50
• KS135 Pipe Stands allow vertical adjustment of the supported pipe using the Lock Nut provided.When the desired height is achieved, the Lock Nut should be Welded to the lower Pipe.
• The height from the centre of the pipe to the underside of the base plate should be nominated at the time of order
• Standard Finish Hot Dip Galvanised.
• KS136 Pipe Stands allow vertical adjustment of the supported pipe using the Lock Nut provided.When the desired height is achieved, the Lock Nut should be Welded to the lower Pipe.
• The height from the centre of the pipe to the underside of the base plate should be nominated at the time of order
• Standard Finish Hot Dip Galvanised.
KS135 Pipe Stand
KS136 Pipe Stand
Kwik-Smart 51
• Smooth operating Slide Guide for ceiling, wall or Floor Mounting• Two Clamps prevents jamming and misalignment• Large sliding distance up to 60mm thermal expansion
• Smooth operating Slide Guide for ceiling, wall or Floor Mounting• Two Clamps prevents jamming and misalignment• Large sliding distance up to 125mm thermal expansion
• Low minimum height - only 25mm• Variable height - height is governed by thread length• Ideal for use with Binder-Strut Channels• Available suitable for both M10 and M12 threads
• Variable height - height is governed by thread length• Ideal for use with Binder-Strut Channels• Available in M16 thread
KS190 Light Duty Slide Guide
KS191 Heavy Duty Slide Guide
PIPE SUPPORT
PIPE SUPPORT
52
KS195 Noise Resilient Pad
KS196 Noise Resilient Washer
• Reduction of structure borne noise for numerous mounting situations• Ideally suited to insulate across and supports using Binder-Strut Channels• Protection Nozzel prevents metal contact between Threaded Rod/Bolts and Binder channels
• Highly elastic sound absorber for light compressive loads• Ideally suited to insulate across and supports using Binder-Strut Channels• Protection Nozzel prevents metal contact be tween Threaded Rod/Bolts and Binder channels
• Sound insulation average 17dB (A)• Ideally used with KS-196 for Binder Channels• Suitable for M10 Threaded Rod or Bolts
• Sound insulation average 18dB (A)• Ideally used with KS-195 for Binder Channels• Suitable for M10 Threaded Rod or Bolts
Kwik-Smart 53
the Binder pressure gauge adapter probe.
b) Lubricate the probe with a small amount of silicone oil and partially insert the pressure gauge adapter probe into the test plug. If you are not sure of the pressure behind the plug, be prepared to quickly with-draw the probe before rupturing or over-pressuring the gauge. The test plug, in its static state and without a cap can easily withstand over 3500 Kpa without leaking. Do not assume that since the plug is not leaking that it is safe to quickly and fully insert a low range pressure gauge. If you are wrong the low range gauge could explode in your hand.
c) When the pressure gauge needle stops moving up-scale fully insert the probe and read the pressure.
d) Do not leave the probe in the plug longer than necessary. Always screw the adapter probe union to the top of the test plug to prevent the internal pressure from ejecting the gauge and probe.
e) When removing the probe do not position your face near the plug. The plug should not leak when removing the probe but always observe safety precautions.
f) As soon as the probe is removed replace the test plug cap.
6. Temperature Probe Insertion
a) Temperature probe insertion is similar to the pressure probe inser-tion with the exception that the op-erator should always first determine the pressure behind the plug before insertion of the temperature probe. This establishes that the plug is op-erating within its specification limits. After pressure has been determined follow the steps outlined in 5a to 5f.
7. When using a test plug which has been installed and unused for sev-eral years follow all the procedures shown aboveSpecification: Body available in Denzincification resis-tant Brass Alloy or Type 316 Stain-less Steel Cores available in Nordel
Specification:
Body available in Denzincification resistant Brass Alloy or Type 316 Stainless Steel Cores available in Nordel for hydraulic installations or Neoprene for natural gas installa-tions.
Temperature Range -10ºC to +135ºC Maximum Pressure 3500Kpa Standard Plug Thread 1/4” BSP, available in 1/4” NPTNordel cores must not be used on natural gas installationsOperating Procedure for Pres-sure and Temperature Readings
1. The operator should wear protec-tive clothing i.e. gloves and goggles when using the plug in high tem-perature lines or where injurious liq-uids or gases are contained.
2. Slowly remove the cap from the plug, if whilst doing so you feel or hear gas or liquids escaping imme-diately retighten the cap. Determine at this time if the plug has been used improperly and if necessary replace the plug.
3. Having determined that the plug is operating correctly,remove the cap.
4. Select the appropriate probe for pressure or temperature.Clean and lubricate the probe with a small amount of silicone oil. Examine the probe for any sharp burrs which could cut the plug cores. Remove any burrs before using; do not use non-standard or damaged probes.
5. Pressure Probe Insertiona) Determine approximate pressure in the pipeline and select a 1∕4” BSP Male outlet pressure gauge of suit-able range and securely screw onto
Test Plug Test Plug Extension
for hydraulic installations or Neo-prene for natural gas installations.
Hydraulics Installations:
The test plug used in the hydraulics industries is the Twinlok Test Plug. It is normally the Dezincification resis-tant.Brass Alloy body with the Nor-del core.Chilled Water circuitsFan Coil UnitsPumpsHeating Water Heat Exchangers
Natural Gas Installations:
The test plug used in natural gas in-stallations is a“Pete’s Plug”.
It has the Dezincification resistant Brass Alloy body but must have the Neoprene Core.
Test Plug Identification
For ease of identification, the Twin-lok Test Plug uses a Red Cap Strap whereas the Pete’s Plug uses a Black Cap Strap.
Always Insist On Twinlok Test PlugsYour Absolute Guarantee of Leak Proof Plugs, 100% Dezincification Resistant.
Twinlok is the registered trade mark belonging to the Binder Group Pty Ltd.
®
®
TEst Plug specification
54
Description
1/4 BSP Twinlok Test Plug Brass
1/4 NTP Twinlok Plug Brass
1/4 BSP Pete’s Plug Brass DRB
1/4 NTP Pete’s Plug Brass
Description
Extension Hex 1/4 BSP Test
Extension Hex 1/4 BSP X 3/8 BSP X 65mmExtension Hex 3/8 BSPT X 3/8 BSPP X 65mm
Description
PG B100 0 to 100
PG B100 0 to 250
PG B100 0 to 400KPA
GP B100 0 to 1000KPA
Description
Dial test thermometer -30 to 70
Dial test thermometer -10 to 110Digital Stem thermometer -10 to 110
• Plugs and Extensions available in Stainless on request.
• Plugs and Extensions available in Stainless on request.
• Plugs and Extensions available in Stainless on request.
•Gauges and Thermometers available in other scales on request.
• Gauges and Thermometers available in other scales on request.
• Gauges and Thermometers available in other scales on request.
Twinlok Test Plug Brass [Z/P]
Hexagon Plug Extension [Z/P]
Pressure Gauge
Dial Test Thermometer
Adaptor Pressure Gauge Diiferetial Thermometer
Plug’s & gauge’s
BEAMCLAMP is a registered trademark of Access Technologies Limited, a subsidiary of Binder Group Pty Ltd. Whilst every effert has been made to ensure the accuracy of the information conatined in this leaflet Access Technologies Limited cannot be held responsible for any errors or omissions. Access Technologies Limited reserve the right to alter or withdraw products without prior notice. Access Technologies Limited accept no responsibility for any loss or damage arising from improper use of their products.© 2008 Access Technologies Limited. All Rights Reserved
•NO SPECIAL TOOLS OR SKILLED LABOUR REQUIRED•HOT DIP GALVANISED AS STANDARD
•NO WEAKENING OF EXISTING STRUCTURE •NO DAMAGE TO PROTECTIVE COATINGS
SAFE STEELWORK CONNECTIONS
Installation of lifting equipment Installation of a new runway beam for a crane
Hanging of industrial lighting systems Cable tray support to existing steelworksystems
BEAMCLAMP®
56
The Type BY clamp is designed for High Friction and Tensile applications that exceed the capacities of the standard Beam-Clamp® products. It features a recessed top that prevents the head of the bolt fromrotating during installation therefore requires the use of only one wrench. The Type BYP washer can be used to fill in the recess of the Type BY to provide a flat surface for a washer and nut. This also allows the Type BY clamps to be used together in beam to beam connec-tions. The full width tail of the BY allows for use with slotted holes and the Type BY may also be used in unison with other BeamClamp® products for greater diversity in applications.
Beam Clamp-BYP
Without-BYP
Product Table
Beam Clamp-BY
With -BYP
Product Code
Size Product Code
TailLength
A B C D1 D2 E Width Torque Tensile SWL(kN) per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)
per two bolts Paint-
ed Steel(2:1 Factor of
Safety)
Bolt Dia (mm)
BYP-12 M12 BY-12S Short M12 27 28.9 13 23 5 12.5 40 90 10.60 4.29BYP-16 M16 BY-16S Short M16 33 33 17 30 8 15 49 240 17.29 8.02BYP-20 M20 BY-20S Short M20 39 39 22 37 10 18 55 470 29.58 11.94 BY-12M Medi-
um M12 27 28.5 13 23 5 12.5 40 130 11.65 7.88
BY-16M Medi-um
M16 33 33 17 30 8 15 49 300 19.41 15.50
BY-20M Medi-um
M20 39 39 22 37 10 18 55 647 32 23.76
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.These products are independently tested in situations to simulate typical site conditions.
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
*Frictional failure for the Type BY clamp is 1mm slip from its original position. Frictional capacities are based on shot blast and painted steelwork. Due to variance in thickness of Hot Dip Galvanised coatings please contact Kee Safety for frictional capacities based on Hot Dip Galvanised steelwork. Independently tested at Ceram, Lloyds Register Certification applied for and pending.
The BY recess is suitable for the hexagonal head of standard grade 8.8 and 10.9 bolts. The Type BYP may be used to fill in the recess allowing for any grade bolt or nut to be tightened down to its surface
COMPONENTS TYPE BY & BYP
BEAMCLAMP®
Kwik-Smart 57
The range of packing pieces below are designed to provide support to the underside of type BY clamps to ensure they clamp at 90 degrees to the steel and provide a flatsurface for the bolt head or nut to be tightened down on to.These can be used in various combinations with the two taillengths of BY clamps to achieve the best clamping position.
The Type BY can be used in a variety of applications and our design team will be pleased to configure a connection specific to your requirements. A design sheet is available for manually working out of the tail length and packing piece combinations along with the bolt lengths and location plate dimensions and is available upon request.
BH2
Type BY used with Type BZ and Type BH
BF3 BF4
Typical end plate cantilevered connection supporting heavy duty work.
W-Beam to C-Channel using combination of BY and BZ clamps.
Two angles connected together using combination of BY and BZ clamps.
Product Code
A B C Ø D
(mm)BH2-14 2 40 40 14BH2-18 2 48 48 18BH2-21 2 50 50 21
Product Code
A B C Ø D
(mm)BF3-14 5 40 40 14BF3-18 5 50 52 18BF3-21 5 55 56 21
Product Code
A B C Ø D
(mm)BF4-14 10 40 40 14BF4-18 10 50 52 18BF4-21 10 55 56 21
PACKING PIECES FOR BY CLAMPS
BEAMCLAMP®
58
The type BA are commonly used in pairs to clamp two steelsections together. The type BA has a recessed top to grip the head of a grade 8.8 setscrew or bolt, this allows a nut and washer to be tightened down on to the flat top of the BB using one tool only. Both clamps are available with three tail lengths 1,2 or 3 (dim E), this should be as near to the thickness of steel it is clamping on or slightly less if an exact match is not possible. Packing pieces BF1, BG1 and BH1 can be used in combination with the tail length to achieve a match to the steel flange, please see page 18 for these items. BA and BB types are suitable for parallel flanges and flanges up to 8 degrees taper. They can also be used on their own if one piece of the steelwork has been pre-drilled. To simplify the selection of tail lengths and packing pieces please see the tables on pages 24 and 25. Please note when using tapered steelwork it is the edge of the steel that we require, see our tables on pages 34 and 35 for edge thickness dimensions.
Beam Clamp-BA
PARALLEL FLANGE INSTALLATION
TAPERED FLANGE INSTALLATION
Product TableProduct Code
Short
ProductCode
Medium
Product Code
Long
A B C D1 D2 E Width Torque Tensile SWL
(kN) per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)
per two bolts
Painted Steel(2:1 Factor of
Safety)
Bolt Dia (mm)
(Nm)
BA-08M M08 9 16 5 9 / 4 / 20 6 1.25 /
BA-10S BA-10M BA-10L M10 12 20 6 11 4 5 7 26 20 2.5 /
BA-12S BA-12M BA-12L M12 15 25.5 7 13 4.5 6 9.5 29.5 70 5.75 1.3
BA-16S BA-16M BA-16L M16 17 31 9 17 5.5 8 11 36 150 9.87 3.9BA-20S BA-20M BA-20L M20 21 35 11 21 7 10 12.5 44 290 16.47 11
BA-24S BA-24M BA-24L M24 26 49 13 25 9 12 16 53 490 21.1 18
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.• 5 to 1 Factor of Safety• Lioyds Register approved• DIBt approved
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
COMPONENTS TYPE BA
BEAMCLAMP®
Kwik-Smart 59
The type BB are commonly used in pairs to clamp two steelsections together. The type BA has a recessed top to grip the head of a grade 8.8 setscrew or bolt, this allows a nut and washer to be tightened down on to the flat top of the BB using one tool only. Both clamps are available with three tail lengths 1,2 or 3 (dim E), this should be as near to the thickness of steel it is clamping on or slightly less if an exact match is not possible. Packing pieces BF1, BG1 and BH1 can be used in combination with the tail length to achieve a match to the steel flange, please see page 18 for these items. BA and BB types are suitable for parallel flanges and flanges up to 8 degrees taper. They can also be used on their own if one piece of the steelwork has been pre-drilled. To simplify the selection of tail lengths and packing pieces please see the tables on pages 24 and 25. Please note when using tapered steelwork it is the edge of the steel that we require, see our tables on pages 34 and 35 for edge thickness dimensions.
Beam Clamp-BB
PARALLEL FLANGE INSTALLATION
TAPERED FLANGE INSTALLATION
Product Code
Short
ProductCode
Medium
Product Code
Long
A B C D1 D2 E Width Torque Tensile SWL
(kN) per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)per two bolts Painted Steel(2:1 Factor of Safety)
Bolt Dia (mm)
(Nm)
BB-08M M08 9 16 5 9 / 4 / 20 6 1.25 /
BB-10S BB-10M BB-10L M10 12 20 6 11 4 5 7 26 20 2.5 /
BB-12S BB-12M BB-12L M12 15 25.5 7 13 4.5 6 9.5 29.5 70 5.75 1.3
BB-16S BB-16M BB-16L M16 17 31 9 17 5.5 8 11 36 150 9.87 3.9BB-20S BB-20M BB-20L M20 21 35 11 21 7 10 12.5 44 290 16.47 11BB-24S BB-24M BB-24L M24 26 49 13 25 9 12 16 53 490 21.1 18
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.• 5 to 1 Factor of Safety• Lioyds Register approved• DIBt approved
Product Table
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
COMPONENTS TYPE BB
BEAMCLAMP®
60
The types BT and BW are specifically designed with a 10 de-grees sloping nose. This sloping nose makes them ideal for fixing on to tapered steelwork such as RSJ’s or crane rail sec-tions. The type BT has a recessed top to captivate the head of a grade 8.8 setscrew or bolt, the type BW has a flat top to allow a nut and washer to be tightened down on it. Both clamps are available with two tail lengths 1 or 2 (dim E), this should be as near to the thickness of steel it is clamping to or slightly less if an exact match is not possible. Packing pieces BF1, BG1 and BH1 can be used in combination with the tail length to achieve a match to the steel flange, please see page 18 for these items. The types BT and BW can also be used on their own if one piece of the steelwork has been pre-drilled. To simplify the selection of tail lengths and packing pieces please see tables on pages 24 and 25. Please note when using ta-pered steelwork it is the edge of the steel that we require, see our tables on pages 34 and 35 for edge thickness dimensions
Type BW
Type BT
PARALLEL FLANGE TAPERED FLANGE
Product TableProduct Code
BT
ProductCode
BW
A B C D1 D2 E Width Torque Tensile SWL
(kN) per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)per two bolts Painted Steel(2:1 Factor of Safety)
Bolt Dia (mm)
(Nm)
BT-12 BW-12 M12 15 25.5 7 13 4 6 28.5 70 5.75 1.3BT-16 BW-16 M16 17 31 9 17 6 8 36 150 9.87 3.9BT-20 BW-20 M20 21 35 11 21 7 10 44 290 16.47 11
• Hot Dip Galvanised to BS EN ISO 1461• Manufactured from Ductile Iron to BS EN1563• 5 to 1 Factor of Safety• 10 degrees nose
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
COMPONENTS TYPE BT & BW
BEAMCLAMP®
Kwik-Smart 61
The BK1 is a self adjusting fixing that consists of two parts. The main body provides a recess to allow a hemispherical washer to be seated. This allows the body to adjust between a specified clamping range and as the washer rotates it pro-vides a flat surface for a nut. This mechanism makes the product suitable for clamping to tapered steelwork of up to 15 degrees, it is also extremely useful for projectswhere the thickness of steel may vary. The M08, M10 and M12 versions feature a tab at the back edge that can be located in the open ends of strut products, both aiding installation and preventing rotation once installed. Should the maximum clamping range be exceeded our BF2 and BG2 packers can be used to in-crease it, please see page 18 for detailsM16, M20, M24
M08, M10. M12
Product Table
Product Code
A B1 B2 C D Width Torque Tensile SWL
(kN) per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)per two bolts Painted Steel(2:1 Factor of Safety)
Bolt Dia (mm)
(Nm)
BK1-08 M08 3 to 12 3 to 9 42 14 41 6 0.26 /BK1-10 M10 3 to 15 3 to 12 54 21 41 20 0.58 /BK1-12 M12 3 to 18 3 to 15 48 17 41 70 2.03 /BK1-16 M16 3 to 24 N/A 61 22.5 47 150 4.28 /BK1-20 M20 3 to 30 N/A 73 26 58 290 6.77 /BK1-24 M24 3 to 36 N/A 86 37.5 79 490 7.52 /
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.• 5 to 1 Factor of Safety• Lioyds Register approved• DIBt approved
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
COMPONENTS TYPE BK1
BEAMCLAMP®
62
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
The BE1 and BE2 feature a socket screw at the back to provideadjustment for varying steel thicknesses. They are the ideal choicewhen flange thicknesses are unknown or change on a project asthey eliminate the need for packing pieces up to their maximumadjustment (Dim E). Once this maximum is exceeded our BF2 andBG2 packers can be used to increase the clamping range, pleasesee page 18 for details. To make the selection of tail lengths andpacking pieces easy please see tables on pages 24 and 25. Pleasenote the BE1 and BE2 are not suitable for steel flanges with tapersgreater than 5 degrees.
Beam Clamp - BE1
Beam Clamp - BE2
Product Table
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.• 5 to 1 Factor of Safety• Lioyds Register approved•Socket screw adjustment
PARALLEL FLANGE INSTALLATION
TAPERED FLANGE INSTALLATION
Product Code
BE1
ProductCode
BE2
A B C D1 D2 E F Width Torque Tensile SWL(kN)
per bolt (5:1 Factor of Safety)
FrictionalSWL (kN)per two bolts Painted Steel(2:1 Factor of Safety)
Bolt Dia
(Grade 8.8)
(mm)(Nm)
BE1-10 M10 20 20 6 / 5 to 20 M06 26 20 2.5 /BE1-12 BE2-12 M12 26 25.5 7 13 6 to 22 M08 28.5 70 3.72 1.3
BE1-16 BE2-16 M16 30 31 9 17 7 to 23 M08 36 150 8.25 3.9BE1-20 M20 35 34 11 / 8 to 24 M10 44 290 16.12 11BE1-24 M24 49 49 13 / 10 to 30 M12 53 490 21.1 18
COMPONENTS TYPE BE1 & BE2
BEAMCLAMP®
Kwik-Smart 63
The types BC1 and BD1 are designed to hook over the up-standing flanges of angles or channels. They can be used together for channel to channel connections or in conjunction with our other clamping products for making angle/channel connections to other types of steel. The BC1 features a re-cessed top to grip a bolt head and theBD1 has a flat top to allow a nut and washer to be tightened on to it. It is suitable for use with studding or other threaded items but we always recommend the use of grade 8.8 high tensile threadeditems.
Beam Clamp - BC1
Beam Clamp - BD1
FLANGE CONTACTINGON BOTTOM EDGEOF TYPE BC1 OR BD1
FLANGE CONTACTING ONRIB OF TYPE BC1 OR BD1
Product Table
• Hot Dip Galvanised to BS EN ISO 1461.• Manufactured from Ductile Iron to BS EN 1563.• 5 to 1 Factor of Safety• Lioyds Register approved•Socket screw adjustment
Product Code
BC1
Produc Code
BD1
A B C D1 E F Width Torque Tensile SWL(kN)
per bolt (5:1 Factor of Safety)
Bolt Dia(Grade 8.8)
(mm)(Nm)
BC1-08 BD1-08 M08 9 8.5 6 5 9 22 3 1.25BC1-10 BD1-10 M10 12 10.5 7.5 6 11 29 10 2.5
BC1-12 BD1-12 M12 15 13.5 9.5 7 12 31.5 35 4.32BC1-16 BD1-16 M16 17 14 11.5 9 17 41 75 7.5BC1-20 BD1-20 M20 21 15 13.5 11 21 49.5 145 11BC1-24 BD1-24 M24 26 19 17 13 25 60 245 17.17
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
COMPONENTS TYPE BC1 & BD1
BEAMCLAMP®
64
Our range of packing pieces is designed to provide sup-port to the underside of clamps to ensure they clamp on to the steel at the correct angle. We have a series of short packers designed for the BA, BB, BT and BW clamps and a long series for the BE1, BE2 and BK1 clamps that reach further back on to the supporting steel. The packers can be used in combination with the fixing range of the clampto ensure a correct fixing. See tables on pages 24 & 25 for the correct combinations for different steel thicknesses.
Type BH1
Type BF2
Type BF1
Type BG2
Type BG1
Product Code
Boltdia.
A B C Ø D
(mm)BH1-08 M08 2 15 22 10BH1-10 M10 2 20 28 12BH1-12 M12 2.5 24 31 14BH1-16 M16 3 29 38 18BH1-20 M20 4 33 44 21BH1-24 M24 4 45 55 26
Product Code
Boltdia.
A B C Ø D
(mm)BF2-08 M08 4 2 22 10BF2-10 M10 5 30 28 12BF2-12 M12 6 39 30 14BF2-16 M16 8 49 35 18BF2-20 M20 10 58 43 21BF2-24 M24 12 77 55 26
Product Code
Boltdia.
A B C Ø D
(mm)BF1-08 M08 8 14 22 10BF1-10 M10 10 18 28 12BF1-12 M12 12 22 30 14BF1-16 M16 16 29 35 18BF1-20 M20 20 33 43 21BF1-24 M24 24 45 55 26
Product Code
Boltdia.
A B C Ø D
(mm)BG2-08 M08 8 24 22 10BG2-10 M10 10 30 28 12BG2-12 M12 12 39 30 14BG2-16 M16 16 49 35 18BG2-20 M20 20 58 43 21BG2-24 M24 24 77 55 26
Product Code
Boltdia.
A B C Ø D
(mm)BG1-08 M08 4 14 22 10BG1-10 M10 5 18 28 12BG1-12 M12 6 22 30 14BG1-16 M16 8 29 35 18BG1-20 M20 10 33 43 21BG1-24 M24 12 45 55 26
The recess in the BF1/ BF2 and BG1/ BG2 should always be face down-wards leaving a flat surface for the tail of the BeamClamp fix-ing to sit on as shown.
The type BF1/ BF2 and BG1/ BG2 should be slipped onto the bolt shank with the open end to-wards the steel-work flange as shown.
PACKING PIECES
BEAMCLAMP®
Kwik-Smart 65
The BL is used for clamping steelwork directly together with-out the need for a location plate. Typical applications would be clamping two steel sections of the same width running par-allel or for clamping down pressure vessel lids. It can also be used with clips and brackets underneath the nut and washer side for fixing conduit or even pipe work. The fixing is tested for tensile and lateral loads, please see data sheet below. The BL part is specifically designed to grip the head of a bolt or nut which means the clamp can always be fixed just using one spanner. The central bolt can be replaced with other threaded items such as threaded bar, eyebolts or J-bolts to provide a suspension element.• Only requires one tool for installation• Hot Dip Galvanised to BS EN ISO 1461• Extensive fixing range• Can accomodate clips/brackets• Tested for Tensile and Lateral Loading
Product Code
A B C D TighteningTorque
3 to 1 FActor of safety applied Tensile Load in line with
rod (kN)
Tensile Load at nose (kN)
(per pair)
Lateral Load (kn)
(mm)(Nm)
BL-08 12.5 45 40 5 to 20 10 1.0 7.4 0.25BL-10 14 58 47 6 to 30 20 2.5 9.3 0.40
BL-12 15 65 51.5 7 to 35 40 5.0 11.0 0.60BL-16 20 95 58 8 to 55 90 7.5 20.3 0.70BL-20 23 116 66 8.5 to 70 180 9.0 23.3 0.75BL-24 26 147 75 9 to 95 200 10.5 34.3 0.80
Tensile Load in line with threaded element
Loading Instruction
Tensile Load acting at the nose of the clamps
Lateral Load
Type BL
The Safe Working Loads are based on assemblies tested in typical conditions. Do not exceed the Safe Working Load (SWL) specified.
Product Table
BL FLANGE CLAMP
BEAMCLAMP®
66
THE GRATEFIX is a heavy-duty fixing that allows open floor grating to be fixed to the supporting steelwork from the top-side only. The Gratefix features a cast bottom piece that pro-vides additional strength to clamp on to the steelwork flange. The Gratefix is available in several different styles to suit the grating dimensions and the application. A mechanical galvan-ised M10 version is available with a symmetrical top bracket to suit 30mm ctrs grating or with an offset bracket to suit 30-41mm ctrs grating most commonly found in the UK. The M08 version is also available in grade 304 stainless steel with a topbracket to suit 30mm ctrs.
OPTION 2Pressed Top bracket – Material: Mild steel to EN 10025 grade S275Cast Bottom Bracket – Material: Malleable iron to BS 1562:Grade EN-GJMB-300-06Both finished in: Mechanical Galv to ASTM B695
OPTION 1Pressed Top Bracket – Stainless Steel to EN 10088 Grade 1.4301 (AISI 304)Cast Bottom Bracket – Stainless Steel to ASTM A743 Grade CF-8 (S30400).
• Allows easy repositioning or lifting of grating• No special tools or skilled labour required• No access to the underside required• Tested for vibration conditions at TÜV
• Mechanical Galvanised Malleable Iron• Stainless Steel Grade 304• Easily installed from the top side only• No drilling, no tapping or welding required
Installation
Step 1 Step 2 Step 3
Product Code
Material /Finish
Screwdia
To suit Grating bar centers (mm)
To suit Grating bar depths (mm)
Tightening torque (Nm)
GF-01 Option 1 M08 30 50 8GF-02 Option 2 M10 30 to 41 50 5
GRATE FIX
BEAMCLAMP®
Kwik-Smart 67
THE GRATING CLIP is the most common style of clip used for fixing down open steel flooring in the UK. It provides a quick and cost effective method of fixing. It is Hot Dip Galvanised and comes as standard with a top bracket to suit 30-41mm ctrs grating bars.
As previously mentioned the Floorfix HT and Gratefix have been tested in conditions to simulate the typical applications of these fixings. The fixings were tested for performance in both vertical and horizontal axis to ensure they did not work loose when subjected to vibration conditions. The test set-up can be seen below, the certificates are available on request.
Product Code
Screwdia
To suit Grating bar centers
(mm)
To suit Grat-ing bar depths
(mm)GRAT-08 M08 30 41 50
Industrial Testing
Horizontal Axis Test Vertical Axis Test
GRATING CLIP
BEAMCLAMP®
68
THE FLOORFIX HT has been developed following customer feedback to provide a fixing with increased functionality to suit a wider range of applications. Floorfix HT is designed to fix flooring plate to supporting steelwork from the topside only without the need for time consuming on site drilling, tapping, bolting or welding. It works on a cam mechanism that can be operated using a basic hexagon key drive. Floorfix HT is so named because it allows steel erectors a high degree of tolerance, it retains all the benefits of our widely renowned original design but is far more user friendly. FloorfixHT allows for floor plates to be fixed to new steelwork that is erected within +/- 6mm of its intended position. It is capable of fixing to steel flanges from 3 to 25mm without the need for additional packing pieces.
The FloorFix is designed for securing chequer/durbar plate to the supporting steelwork without the need for on site drill-ing or welding of the floor plate and supporting steel struc-ture. It allows the connection to be made from the top side only using a basic allen key wrench. It can be easily lifted for maintainence purposes and re-set to its original position within minutes. The FloorFix solution can be used anywhere without the need for specialist drilling/welding equipment or the need for expensive access equipment to get to the under-side. The FloorFix is also tested at TUV for vibration condi-tions and providing the countersunk screw is tightened to our recommended torque then the connection is guaranteed not to come loose.
• Allows easy repositioning or lifting of floor plate• No special tools or skilled labour required• No access to the underside required• Tested for vibration conditions at TUV
• Allows for +/- 6mm construction tolerance• Can fix up to 25mm thick steel as standard• Hot Dip Galvanised finish as standard• Easily installed from the top side only• No drilling, no tapping or welding required
• Installation from one side only• Manufactured from Ductile Iron• Hot Dip Galvanized• Allows for easy maintenance• Tested at TUV for vibration conditions
Product Code
Screwdia
Floor Plate Thickness Steelwork Flange Thickness Tightening torque (Nm)
FF-08HT M08 3 12 3 25 20FF-10HT M10 5 12 3 25 25FF-12HT M12 6 12 3 25 30
Product Code
Screwdia
Floor Plate Thickness Steelwork Flange Thickness Tightening torque (Nm)
FF-08 M08 3 12 3 15 20FF-10 M10 5 12 3 15 20FF-12 M12 6 12 3 15 30
Min
Min
Min
Min
Max
Max
Max
Max
Floorfix HT has been tested for vibration conditions to simu-late the most common applications where the fixings would be used e.g. walkways, machine shops and press shops. Please ask our technical department for a copy of the certifi-cate should you require this.
STEEL FLOOR FIXINGS
THE FLOORFIX HT
FLOORFIX
BEAMCLAMP®
Kwik-Smart 69
Step 1 :Assemble the Floor-fix HT to the unde side of the floor plate making sure the markings “THIS WAY UP” are facing it. Loosely tighten he bolt making sure the flat edge of the fixing is in line with the edge of the steel-work it is going to fix to.
Step 3 : Once the floor plate is in the desired position rotate the coun-tersunk bolt one full turn anti-clockwise.
Step 2 : Lower the plate in to position over the supportingsteelwork.
Step 4 : Tighten the coun-tersunk screw until the plate is secured, forguar-anteed performance use the recommended tight-ening torques given in table.
Installation Instruction
Plate Preparation
Floor Fix HT
Floor Fix HT
Floor Fix
Floor Fix
Steelwork Steelwork
Hole to be countersunk at 450 Hole to be countersunk at 450
Floor Plate Floor Plate
16.5 mm 15 mm
FLOORFIX HT INSTALLATION INSTRUCTIONS
BEAMCLAMP®
70
BoxBolt is a fully tested and approved blind connection solu-tion for connecting to hollow section steel or where access is restricted to one side only. The BoxBolt is suitable for use with rectangular, square and even circular hollow sections. The BoxBolt features a hexagon head design to aid installation with a standard wrench. It allows it to be installed with our unique BoxSokTM installation tool for when installation time needs to be kept to an absolute minimum.
The BoxBolt is available in three finishes; Zinc Plated for the less aggressive environments, Hot Dip Galvanized for the more aggressive environments, and Stainless Steel for the most demanding of applications. These finishes combined with three lengths of BoxBolt make it extremely flexible to suit its environment and application. The BoxBolt is approved for use by Lloyds Register (LR) type approval and the Deutsches Institut für Bautechnik (DIBt) to give the specifier and user total confidence.
The loads stated above are based on our DIBt (Deutsches Institut für Bautechnik) approval document Z-14.4-482. The loads shown above are working loads based on the rated loads factored by 1.4 which is an average value between 1.35 used for static loading and 1.5 used for live loads. The rated loads stated in our approval already have a 1.375 factor for tensilw and 1.1 factor for shear applied to them. This therefore means that the above loads have a 1.375 x 1.4 = 1.925 to 1 FOS in tensile and 1.1 x 1.4 = 1.54 FOS in shear.
The BoxBolt is also tested and approved by DIBt (Deutsches Institut fur Bautechnik) which complies with the DIN 18800 and Eurocode 3 design methods for bolted steel connections. A design guide and calculator is available when using these methods. Please ask our technical team for more information.The BoxBolt is also Lloyds Register type approved for use, should you required a copy of the approval certificate our techincal team will be able to assist. The strenth of the material ourBoxBolt is connecting into should be checked for structural capacity by a structural engineer.
Part Number and Description
Dimensional Information Technical Load Information
Box Bolt
Product code
Zinc
Product code
HDG
Size Setscrewlength(mm)
Fixing range(dim x)
Across flats of shoul-der(mm)
shoulderthick-ness(mm)
Dim A
Dim B
Hole Size Tro-que
Galvanised/ Zinc plated Tensile Shear
Stainless SteelTensile Shear
M06 B06-1 B06-1H 1 45 3 29 17 30 11 11 +1.0,-0.25 19 5.71 16.21 / /
M08B08-1 B08-1H 1 50 3 28 22 35 13 14 +1.0,-0.25 25 12.86 21.07 13.29 26.14
B08-2 B08-2H 2 70 12 46 22 35 13 14 +1.0,-0.25 25 12.86 21.07 13.29 26.14
B08-3 B08-3H 3 90 24 66 22 35 13 14 +1.0,-0.25 25 12.86 21.07 13.29 26.14
M10B10-1 B10-1H 1 50 3 23 24 40 15 18+1.0,-0.25 45 24.07 37 21.07 47.07
B10-2 B10-2H 2 70 15 43 24 40 15 18+1.0,-0.25 45 24.07 37 21.07 47.07
B10-3 B10-3H 3 90 30 63 24 40 15 18+1.0,-0.25 45 24.07 37 21.07 47.07
M12B12-1 B12-1H 1 55 3 25 26 50 18 20+ 1.0,-0.25 80 29.43 48.29 30.64 59.88
B12-2 B12-2H 2 80 18 50 26 50 18 20+ 1.0,-0.25 80 29.43 48.29 30.64 59.88
B12-3 B12-3H 3 100 36 70 26 50 18 20+ 1.0,-0.25 80 29.43 48.29 30.64 59.88
M16B16-1 B16-1H 1 75 3 35 36 55 20 26+ 2.0,-0.25 190 52.29 88.21 57.07 108.57
B16-2 B16-2H 2 100 24 60 36 55 20 26+ 2.0,-0.25 190 52.29 88.21 57.07 108.57
B16-3 B16-3H 3 120 48 80 36 55 20 26+ 2.0,-0.25 190 52.29 88.21 57.07 108.57
M20B20-1 B20-1H 1 100 3 42 46 70 25 33 +2.0,-0.25 300 92 145.36 89.07 181.79
B20-2 B20-2H 2 120 30 72 46 70 25 33 +2.0,-0.25 300 92 145.36 89.07 181.79
B20-3 B20-3H 3 150 63 102 46 70 28 33 +2.0,-0.25 300 92 145.36 89.07 181.79
The above loads are working loads that have the following Factor of Safety (FOS) Applied: Tensile = 1.925 to 1 Shear = 1.54 to 1
BoxBolt
BoxBolt Technical Data
box bolt
BEAMCLAMP®
Kwik-Smart 71
Technical Information
BoxSok™ Rapid Assmebly Tool
or
Shoulder
Core Bolt
Button Head Socket
Hexagon Head
CountersunkSocket
Socket head cap screw
Body
Cone
Min. edgedistance
The BoxBolt is often used on high profile projects where the aesthetics of the building are essential. It is for this rea-son the BoxBolt can be adapted to suit the requirements of the Client and the Architect to make the connection pleas-ing to the eye. The most common versions we can offer are shown above. Should you require a different style then please contact our technical department.
MaterialsMild steel to BS EN 10083 Grade 1.1151Stainless steel to BS EN 10088 Grade 1.4401
FinishesZinc plated to BS EN 12329 : Class Fe//Zn8//AHot Dip Spun Galvanised to BS EN ISO 1461
The BoxSokTM Installation Tool is a unique rapid assembly tool for the BoxBolt fixing. This specially designed socket holds the hexagon shoulder on the body to stop it rotating whilst allowing the inner socket to tighten up the core bolt. The core bolt draws the cone up inside the slotted body of the sleeve and expands the individual fins inside the con-nection. The BoxSokTM eliminates the need for two tools to install the BoxBolt; this considerably speeds up the instal-lation process and also reduces the risk of trapping hands between two tools. The BoxSokTM device is available to suit all BoxBolt diameters.
box bolt
BEAMCLAMP®
72
Fast Fit is an off the shelf engineered clamping solution toconnect two steel sections together without the need for on-site drilling or welding. All you need to secure two sectionstogether comes in one box. The system comprises a framewhich wraps around the edges of the sections and slides intoplace to provide a position for the clamps to be secured.The system allows for varying angles that can be easilyachieved by sliding the beams relative to each other.The Fast Fit system delivers a guaranteed connection everytime without the need for on-site testing or relying on theskills of the installer. No removal of the protective coatingson the existing steel or holes is needed to make a connection.All that is required to complete a connection are simple handtools and semi-skilled labour
Product TableProduct Code
Boltdia
Boltgrade
Boltlength (mm)
Overallsize(mm)
Flangethickness
(mm)
Flangewidth
Tighteningtorque(Nm)
Tensile load(4 bolts)
(kN)
Frictional load(kN)
BCFF16 M16 8.8 130 350 x 350 3 to 27 65 to 190 150 21.19 5.08
• NO SITE DRILLING OR WELDING• NO HOT WORK PERMITS• NO FABRICATION OF PLATES OR CLAMPS
Achievable AnglesThe Fast Fit system is designed to allow sections of different widths to be connected at varying angles. The table below provides information on the angles which can be achieved.
Factor of SafetyThe below loading data has a 5 to 1 Factor of Safety.
mm 65 76.2 88.9 101.6 114.3 127.0 139.7 152.4 165.1 177.8 19065 45 45 50 50 50 55 55 60 65 70 7576.2 45 45 50 50 50 55 55 60 65 70 7588.9 50 50 50 50 55 55 55 55 65 70 75101.6 50 50 50 50 55 55 55 55 65 70 75114.3 50 50 50 50 50 55 55 55 65 70 75127.0 55 55 55 55 55 55 55 55 65 70 75139.7 55 55 55 55 55 55 55 55 65 70 75152.4 60 60 60 60 60 60 60 65 65 70 75165.1 65 65 65 65 65 65 65 65 65 70 75177.8 707 70 70 70 70 70 70 70 70 75 75190 75 75 75 75 75 75 75 75 75 75 80
Top Section Flange Width
Bot
tom
Sec
tion
Flan
ge W
idth
FAST FIT
BEAMCLAMP®
Kwik-Smart 73
Installation Instructions
The Fast Fit system can be fully installed in under 5 minutes which saves time compared to traditional welding or drilling methods. Following the steps below will give a fully guaranteed connection.
STEP 1 - Install the framework of platesaround the two sections to be connected.
STEP 4 - The front and back edge of theclamps should run parallel with the steelsections.
STEP 5 - Hold the head of the bolt with astandard wrench and tighten the nut with a torque wrench to the recommended torque stated above. Repeat this for all four bolts.
IMPORTANT CHECK!Always check the clamps have been installed the correct way around. See diagrams below:
STEP 2 - Rotate the open side of the platearound the sections so that the frame is complete.
STEP 3 - Insert one set of clamps througheach corner ensuring they are positioned as in step 4.
Fast Fit System vs. Drilling or Welding – ComparisonThe table below demonstrate the time that can be saved by using a Fast Fit system compared to either a standard welded or drilled and bolted connection. The majority of time and cost is saved by the reduction in preparation and labour time.This table does not include the potential for remedy work that may need to be carried out should the connection not be in the correct place. With the Fast Fit system this is quick and easy to do where as with a welded or drilled and bolted connection it is more difficult and time consuming.
Connection Requirements Time (hrs) Details of each stepEngineering 0.1 The design time is reduced dramatically as the system
works with stated parametersMarking of Steel 0.05 The marking is reduced as the connection is adjustableSite set up 0.05 Product arrives in a kit ready to installAssenbly time 0.05 The assembly time is quicker than a bolted connection as
no hole alignment is requiredTightening of bolts 0.04 Allowing 1 minute per bolt and nut
Fast Fit Work System
Time taken by each systemWelding
(hrs)Drilling & Bolting
Fast Fit(hrs)
Savings(hrs)
4.5 3.5 0.5 3 to 4
FAST FIt
Index
74
Part ID Description Binder Code
Page No.
BC1-08 M08 Hook Type - Recess Top Beam Clamp 362001 63
BC1-10 M10 Hook Type - Recess Top Beam Clamp 362002 63
BC1-12 M12 Hook Type - Recess Top Beam Clamp 362003 63
BC1-16 M16 Hook Type - Recess Top Beam Clamp 362004 63
BC1-20 M20 Hook Type - Recess Top Beam Clamp 362005 63
BC1-24 M24 Hook Type - Recess Top Beam Clamp 362006 63
Part ID Description Binder Code
Page No.
BD1-08 M08 Hook Type - FlatTop Beam Clamp 363001 63
BD1-10 M10 Hook Type - Flat Top Beam Clamp 363002 63
BD1-12 M12 Hook Type - Flat Top Beam Clamp 363003 63
BD1-16 M16 Hook Type - Flat Top Beam Clamp 363004 63
BD1-20 M20 Hook Type - Flat Top Beam Clamp 363005 63
BD1-24 M24 Hook Type - Flat Top Beam Clamp 363006 63
Part ID Description Binder Code
Page No.
BE1-10 M10 Adjustable Recess Top Beam Clamp 364001 62
BE1-12 M12 Adjustable Recess Top Beam Clamp 364002 62
BE1-16 M16 Adjustable Recess Top Beam Clamp 364003 62
BE1-20 M20 Adjustable Recess Top Beam Clamp 364004 62
BE1-24 M24 Adjustable Recess Top Beam Clamp 364005 62
Part ID Description Binder Code
Page No.
BE2-12 M12 Adjustable Flat Top Beam Clamp 365001 62
BE2-16 M16 Adjustable Flat Top Beam Clamp 365002 62
BC1 - Beam Clamp
BD1 - Beam Clamp
BE1 - Beam Clamp
BE2 - Beam Clamp
Part ID Description Binder Code
Page No.
BA-08M M08 Recessed Top Beam Clamp - Med 360001 58
BA-10S M10 Recessed Top Beam Clamp - Short 360002 58
BA-10M M10 Recessed Top Beam Clamp - Med 360003 58
BA-10L M10 Recessed Top Beam Clamp - Long 360004 58
BA-12S M12 Recessed Top Beam Clamp - Shor 360005 58
BA-12M M12 Recessed Top Beam Clamp - Med 360006 58
BA-12L M12 Recessed Top Beam Clamp - Long 360007 58
BA-16S M16 Recessed Top Beam Clamp - Shor 360008 58
BA-16M M16 Recessed Top Beam Clamp - Med 360009 58
BA-16L M16 Recessed Top Beam Clamp - Long 360010 58
BA-20S M20 Recessed Top Beam Clamp - Shor 360011 58
BA-20M M20 Recessed Top Beam Clamp - Med 360012 58
BA-20L M20 Recessed Top Beam Clamp - Long 360013 58
BA-24S M24 Recessed Top Beam Clamp - Shor 360014 58
BA-24M M24 Recessed Top Beam Clamp - Med 360015 58
BA-24L M24 Recessed Top Beam Clamp - Long 360016 58
BA - Beam Clamp
B
BB - Beam ClampPart ID Description Binder
CodePage
No.BB-08M M08 Flat Top Beam Clamp - Medium 361001 61
BB-10S M10 Flat Top Beam Clamp - Short 361002 61
BB-10M M10 Flat Top Beam Clamp - Medium 361003 61
BB-10L M10 Flat Top Beam Clamp - Long 361004 61
BB-12S M12 Flat Top Beam Clamp - Short 361005 61
BB-12M M12 Flat Top Beam Clamp - Medium 361006 61
BB-12L M12 Flat Top Beam Clamp - Long 361007 61
BB-16S M16 Flat Top Beam Clamp - Short 361008 61
BB-16M M16 Flat Top Beam Clamp - Medium 361009 61
BB-16L M16 Flat Top Beam Clamp - Long 361010 61
BB-20S M20 Flat Top Beam Clamp - Short 361011 61
BB-20M M20 Flat Top Beam Clamp - Medium 361012 61
BB-20L M20 Flat Top Beam Clamp - Long 361013 61
BB-24S M24 Flat Top Beam Clamp - Short 361014 61
BB-S4M M24 Flat Top Beam Clamp - Medium 361015 61
BB-24L M24 Flat Top Beam Clamp - Long 361016 61
Part ID Description Binder Code
Page No.
KS1796 Beam Clamp HDG 672034 25
KS1271 Beam Clamp HDG 672035 25
KS2785 Beam Clamp HDG 672036 25
KS1386 Beam Clamp ZP 674036 25
KS1271-SS Beam Clamp G316 S/S 673034 25
KS2785-SS Beam Clamp G316 S/S 673035 25
Beam Clamps
Part ID Description Binder Code
Page No.
BF1-08 M08 Middle Packer - Short 372001 64
BF1-10 M10 Middle Packer - Short 372002 64
BF1-12 M12 Middle Packer - Short 372003 64
BF1-16 M16 Middle Packer - Short 372004 64
BF1-20 M20 Middle Packer - Short 372005 64
BF1-24 M24 Middle Packer - Short 372006 64
Part ID Description Binder Code
Page No.
BF2-08 M08 Middle Packer - Long 372007 64
BF2-10 M10 Middle Packer - Long 372008 64
BF2-12 M12 Middle Packer - Long 372009 64
BF2-16 M16 Middle Packer - Long 372010 64
BF2-20 M20 Middle Packer - Long 372011 64
BF2-24 M24 Middle Packer - Long 372012 64
BF1 - Beam Clamp
BF2 - Beam Clamp
Part ID Description Binder Code
Page No.
BF4-14 M12 High Friction Washer P2 378008 57
BF4-18 M16 High Friction Washer P2 378009 57
BF4-21 M20 High Friction Washer P2 378010 57
Part ID Description Binder Code
Page No.
BF3-14 M12 High Friction Washer P1 378011 57
BF3-18 M16 High Friction Washer P1 378012 57
BF3-21 M20 High Friction Washer P1 378013 57
BF4 - Beam Clamp
BF3 - Beam Clamp
index
Kwik-Smart 75
Part ID Description Binder Code
Page No.
BG1-08 M08 Thick Packer - Short 373001 64
BG1-10 M10 Thick Packer - Short 373002 64
BG1-12 M12 Thick Packer - Short 373003 64
BG1-16 M16 Thick Packer - Short 373004 64
BG1-20 M20 Thick Packer - Short 373005 64
BG1-24 M24 Thick Packer - Short 373006 64
Part ID Description Binder Code
Page No.
BG2-08 M08 Thick Packer - Long 373007 64
BG2-10 M10 Thick Packer - Long 373008 64
BG2-12 M12 Thick Packer - Long 373009 64
BG2-16 M16 Thick Packer - Long 373010 64
BG2-20 M20 Thick Packer - Long 373011 64
BG2-24 M24 Thick Packer - Long 373012 64
BG1 - Beam Clamp
BG2 - Beam Clamp
Part ID Description Binder Code
Page No.
BH1-08 M08 Thin Packer ZP 371001 64
BH1-10 M10 Thin Packer ZP 371002 64
BH1-12 M12 Thin Packer ZP 371003 64
BH1-16 M16 Thin Packer ZP 371004 64
BH1-20 M20 Thin Packer ZP 371005 64
BH1-24 M24 Thin Packer ZP 371006 64
BH1 - Beam Clamp
Part ID Description Binder Code
Page No.
BK1-08 M08 Self Adjusting Beam Clamp 366001 61
BK1-10 M10 Self Adjusting Beam Clamp 366002 61
BK1-12 M12 Self Adjusting Beam Clamp 366003 61
BK1-16 M16 Self Adjusting Beam Clamp 366004 61
BK1-20 M20 Self Adjusting Beam Clamp 366005 61
BK1-24 M24 Self Adjusting Beam Clamp 366006 61
BK1 - Beam Clamp
Part ID Description Binder Code
Page No.
BH2-14 M12 High Friction Washer Clipped 378014 57
BH2-18 M16 High Friction Washer Clipped 378015 57
BH2-20 M20 High Friction Washer Clipped 378016 57
BH2 - Beam Clamp
Part ID Description Binder Code
Page No.
BL-08 M08 BL Flange Clamp 377001 65
BL-10 M10 BL Flange Clamp 377002 65
BL-12 M12 BL Flange Clamp 377003 65
BL-16 M16 BL Flange Clamp 377004 65
BL-20 M20 BL Flange Clamp 377005 65
BL-24 M24 BL Flange Clamp 377006 65
BL - Beam Clamp
Part ID Description Binder Code
Page No.
BT-12 BG379 M12 BT BeamClamp 379000 60
BT-16 BG379 M16 BT BeamClamp 379001 60
BT-20 BG379 M20 BT BeamClamp 379002 60
Part ID Description Binder Code
Page No.
BW-12 BG379 M12 BW BeamClamp 379003 60
BW-16 BG379 M16 BW BeamClamp 379004 60
BW-20 BG379 M20 BW BeamClamp 379005 60
BT Type - Beam Clamp
BW Type - Beam Clamp
Part ID Description Binder Code
Page No.
BY-16S M16 High Friction Clamp Short 378000 56
BY-20S M20 High Friction Clamp Short 378001 56
BY-12M M12 High Friction Clamp Medium 378002 56
BY-12S BG378 M12 High Friction Clamp Short 378017 56
BY-16M M16 High Friction Clamp Medium 378003 56
BY-20M M20 High Friction Clamp Medium 378004 56
Part ID Description Binder Code
Page No.
BYP-12 M12 High Friction Clamp Washer 378005 56
BYP-16 M16 High Friction Clamp Washer 378006 56
BYP-20 M20 High Friction Clamp Washer 378007 56
BY - Beam Clamp
BYP - Beam Clamp
Part ID Description Binder Code
Page No.
BG367-08 M08 BoxSok Installation Tool 367001 71
BG367-10 M10 BoxSok Installation Tool 367002 71
BG367-12 M12 BoxSok Installation Tool 367003 71
BG367-16 M16 BoxSok Installation Tool 367004 71
BG367-20 M20 BoxSok Installation Tool 367005 71
BoxSox - Beam Clamp
Part ID Description Binder Code
Page No.
B08-1 M08 BoxBolt Size 1 Zinc 368001 70
B08-2 M08 BoxBolt Size 2 Zinc 368002 70
B08-3 M08 BoxBolt Size 3 Zinc 368003 70
B10-1 M10 BoxBolt Size 1 Zinc 368004 70
B10-2 M10 BoxBolt Size 2 Zinc 368005 70
B10-3 M10 BoxBolt Size 3 Zinc 368006 70
B12-1 M12 BoxBolt Size 1 Zinc 368007 70
B12-2 M12 BoxBolt Size 2 Zinc 368008 70
B12-3 M12 BoxBolt Size 3 Zinc 368009 70
B16-1 M16 BoxBolt Size 1 Zinc 368010 70
B16-2 M16 BoxBolt Size 2 Zinc 368011 70
B16-3 M16 BoxBolt Size 3 Zinc 368012 70
B10-1 M20 BoxBolt Size 1 Zinc 368013 70
B20-2 M20 BoxBolt Size 2 Zinc 368014 70
B20-3 M20 BoxBolt Size 3 Zinc 368015 70
B08-1H M08 BoxBolt Size 1 HDG 368016 70
B08-2H M08 BoxBolt Size 2 HDG 368017 70
B08-3H M08 BoxBolt Size 3 HDG 368018 70
B10-1H M10 BoxBolt Size 1 HDG 368019 70
B10-2H M10 BoxBolt Size 2 HDG 368020 70
B10-3H M10 BoxBolt Size 3 HDG 368021 70
B12-1H M12 BoxBolt Size 1 HDG 368022 70
B12-2H M12 BoxBolt Size 2 HDG 368023 70
B12-3H M12 BoxBolt Size 3 HDG 368024 70
B16-1H M16 BoxBolt Size 1 HDG 368025 70
B16-2H M16 BoxBolt Size 2 HDG 368026 70
Box Bolt - Beam Clamp
Index
76
Part ID Description Binder Code
Page No.
BG106-15 15NB Light Duty Saddle Clamp HDG 106000 42
BG106-20 20NB Light Duty Saddle Clamp HDG 106001 42
BG106-25 25NB Light Duty Saddle Clamp HDG 106002 42
BG106-32 32NB Light Duty Saddle Clamp HDG 106003 42
BG106-42 42NB Light Duty Saddle Clamp HDG 106004 42
BG106-50 50NB Light Duty Saddle Clamp HDG 106005 42
BG106-65 65NB Light Duty Saddle Clamp HDG 106006 42
BG106 - Saddle Clamp
Part ID Description Binder Code
Page No.
BG100-15 15NB Light Duty 2 Bolt Clamp HDG 100001 40
BG100-20 20NB Light Duty 2 Bolt Clamp HDG 100002 40
BG100-25 25NB Light Duty 2 Bolt Clamp HDG 100003 40
BG100-32 32NB Light Duty 2 Bolt Clamp HDG 100004 40
BG100-40 40NB Light Duty 2 Bolt Clamp HDG 100005 40
BG100-50 50NB Light Duty 2 Bolt Clamp HDG 100006 40
BG100-65 65NB Light Duty 2 Bolt Clamp HDG 100007 40
BG100-80 80NB Light Duty 2 Bolt Clamp HDG 100008 40
BG100-100 100NB Light Duty 2 Bolt Clamp HDG 100009 40
BG100-125 125NB Light Duty 2 Bolt Clamp HDG 100010 40
BG100-150 150NB Light Duty 2 Bolt Clamp HDG 100011 40
BG100-200 200NB Light Duty 2 Bolt Clamp HDG 100012 40
BG100-225 225NB Light Duty 2 Bolt Clamp HDG 100013 40
BG100-250 250NB Light Duty 2 Bolt Clamp HDG 100014 40
BG100-300 300NB Light Duty 2 Bolt Clamp HDG 100015 40
BG100-350 350NB Light Duty 2 Bolt Clamp HDG 100016 40
BG100-400 400NB Light Duty 2 Bolt Clamp HDG 100017 40
BG100-450 450NB Light Duty 2 Bolt Clamp HDG 100018 40
BG100-500 500NB Light Duty 2 Bolt Clamp HDG 100019 40
BG100-600 600NB Light Duty 2 Bolt Clamp HDG 100020 40
BG100-750 750NB Light Duty 2 Bolt Clamp HDG 100021 40
BG100-900 900NB Light Duty 2 Bolt Clamp HDG 100022 40
BG100-20-SS 20NB Light Duty 2 Bolt Clamp 316 100052 40
BG100-25-SS 25NB Light Duty 2 Bolt Clamp 316 100053 40
BG100-40-SS 40NB Light Duty 2 Bolt Clamp 316 100055 40
BG100-50-SS 50NB Light Duty 2 Bolt Clamp 316 100056 40
BG100-65-SS 65NB Light Duty 2 Bolt Clamp 316 100057 40
BG100-80-SS 80NB Light Duty 2 Bolt Clamp 316 100058 40
BG100-100-SS 100NB Light Duty 2 Bolt Clamp 316 100059 40
BG100-125-SS 125NB Light Duty 2 Bolt Clamp 316 100060 40
BG100-150-SS 150NB Light Duty 2 Bolt Clamp 316 100061 40
BG100-200-SS 200NB Light Duty 2 Bolt Clamp 316 100062 40
BG100-225-SS 225NB Light Duty 2 Bolt Clamp 316 100063 40
BG100-125-SS 125NB Light Duty 2 Bolt Clamp 304 100090 40
BG100-40CU-SS 40Cu Light Duty 2 Bolt Clamp 316 100115 40
BG100-65CU-SS 65Cu Light Duty 2 Bolt Clamp 316 100117 40
BG100-80CU-SS 80Cu Light Duty 2 Bolt Clamp 316 100118 40
BG100-100CU-SS 100Cu Light Duty 2 Bolt Clamp 316 100119 40
BG100-125CU-SS 125Cu Light Duty 2 Bolt Clamp 316 100120 40
BG100-200CU-SS 200Cu Light Duty 2 Bolt Clamp 316 100122 40
BG100-15CU 15CU Light Duty 2 Bolt Clamp HDG 100200 40
BG100-20CU 20CU Light Duty 2 Bolt Clamp HDG 100201 40
BG100-25CU 25CU Light Duty 2 Bolt Clamp HDG 100202 40
BG100-32CU 32CU Light Duty 2 Bolt Clamp HDG 100203 40
BG100-40CU 40CU Light Duty 2 Bolt Clamp HDG 100204 40
BG100-50CU 50CU Light Duty 2 Bolt Clamp HDG 100205 40
BG100-65CU 65CU Light Duty 2 Bolt Clamp HDG 100206 40
BG100-80CU 80CU Light Duty 2 Bolt Clamp HDG 100207 40
BG100-100CU 100CU Light Duty 2 Bolt Clamp HDG 100208 40
BG100-125CU 125CU Light Duty 2 Bolt Clamp HDG 100209 40
BG100-150CU 150CU Light Duty 2 Bolt Clamp HDG 100210 40
BG100-200CU 200CU Light Duty 2 Bolt Clamp HDG 100211 40
BG100-250CU 250CU Light Duty 2 Bolt Clamp HDG 100212 40
BG100-300CU 300CU Light Duty 2 Bolt Clamp HDG 100213 40
BG100 - Light Duty 2 Bolt Clamp
BG100-40P 40PVC Light Duty 2 Bolt Clamp HDG 100300 40
BG100-50P 50PVC Light Duty 2 Bolt Clamp HDG 100301 40
BG100-65P 65PVC Light Duty 2 Bolt Clamp HDG 100302 40
BG100-80P 80PVC Light Duty 2 Bolt Clamp HDG 100303 40
BG100-100P 100PVC Light Duty 2 Bolt Clamp HDG 100304 40
BG100-150P 150PVC Light Duty 2 Bolt Clamp HDG 100305 40
BG100-200P 200PVC Light Duty 2 Bolt Clamp HDG 100306 40
BG100-225P 225PVC Light Duty 2 Bolt Clamp HDG 100307 40
BG100-250P 250PVC Light Duty 2 Bolt Clamp HDG 100308 40
BG100-300P 300PVC Light Duty 2 Bolt Clamp HDG 100309 40
Part ID Description Binder Code
Page No.
BG105-15 15NB Saddle Guide HDG 105000 41
BG105-20 20NB Saddle Guide HDG 105001 41
BG105-25 25NB Saddle Guide HDG 105002 41
BG105-32 32NB Saddle Guide HDG 105003 41
BG105-40 40NB Saddle Guide HDG 105004 41
BG105-50 50NB Saddle Guide HDG 105005 41
BG105-65 65NB Saddle Guide HDG 105006 41
BG105-80 80NB Saddle Guide HDG 105007 41
BG105-100 100NB Saddle Guide HDG 105008 41
BG105-125 125NB Saddle Guide HDG 105009 41
BG105-150 150NB Saddle Guide HDG 105010 41
BG105-200 200NB Saddle Guide HDG 105011 41
BG105-250 250NB Saddle Guide HDG 105013 41
BG105-300 300NB Saddle Guide HDG 105014 41
BG105-400 350NB Saddle Guide HDG 105015 41
BG105-400 400NB Saddle Guide HDG 105016 41
BG105-450 450NB Saddle Guide HDG 105017 41
BG105-500 500NB Saddle Guide HDG 105018 41
BG105-600 600NB Saddle Guide HDG 105019 41
BG105-15CU 15Cu Saddle Guide HDG 105100 41
BG105-20CU 20Cu Saddle Guide HDG 105101 41
BG105-25CU 25Cu Saddle Guide HDG 105102 41
BG105-32CU 32Cu Saddle Guide HDG 105103 41
BG105-40CU 40Cu Saddle Guide HDG 105104 41
BG105-50CU 50Cu Saddle Guide HDG 105105 41
BG105-65CU 65Cu Saddle Guide HDG 105106 41
BG105-80CU 80Cu Saddle Guide HDG 105107 41
BG105-125CU 125Cu Saddle Guide HDG 105109 41
BG105-150CU 150Cu Saddle Guide HDG 105110 41
BG105-200CU 200Cu Saddle Guide HDG 105111 41
BG105-250CU 250Cu Saddle Guide HDG 105112 41
BG105-300CU 300Cu Saddle Guide HDG 105113 41
BG105-50P 50PVC Saddle Guide HDG 105201 41
BG105-65P 65PVC Saddle Guide HDG 105202 41
BG105-80P 80PVC Saddle Guide HDG 105203 41
BG105-150P 150PVC Saddle Guide HDG 105205 41
BG105-200P 200PVC Saddle Guide HDG 105206 41
BG105 - Saddle Guide
B16-3H M16 BoxBolt Size 3 HDG 368027 70
B20-1H M20 BoxBolt Size 1 HDG 368028 70
B20-2H M20 BoxBolt Size 2 HDG 368029 70
B20-3H M20 BoxBolt Size 3 HDG 368030 70
index
Kwik-Smart 77
BG107 - U Bolt ClampPart ID Description Binder
CodePage
No.BG107CON-20 20mm Conduit U-Bolt Clamp ZP 107000 43
BG107CON-25 25mm Conduit U-Bolt Clamp ZP 107001 43
BG107CON-30 30mm Conduit U-Bolt Clamp ZP 107002 43
BG107CON-40 40mm Conduit U-Bolt Clamp ZP 107003 43
BG107CON-50 50mm Conduit U-Bolt Clamp ZP 107004 43
BG107CON-20-H 20mm Conduit U-Bolt Clamp HDG 107011 43
BG107CON-25-H 25mm Conduit U-Bolt Clamp HDG 107012 43
BG107CON-30-H 30mm Conduit U-Bolt Clamp HDG 107013 43
BG107CON-40-H 40mm Conduit U-Bolt Clamp HDG 107014 43
BG107CON-70-H 50mm Conduit U-Bolt Clamp HDG 107015 43
BG107CON-20-SS 20mm Conduit U-Bolt Clamp Gr.316 107005 43
BG107CON-25-SS 25mm Conduit U-Bolt Clamp Gr.316 107006 43
BG107CON-30-SS 30mm Conduit U-Bolt Clamp Gr.316 107008 43
BG107CON-40-SS 40mm Conduit U-Bolt Clamp Gr.316 107009 43
BG107CON-50-SS 50mm Conduit U-Bolt Clamp Gr.316 107010 43
C
Part ID Description Binder Code
Page No.
UC150 150mm Unbraced Cantilever HDG 620001 21
UC300 300mm Unbraced Cantilever HDG 620002 21
UC450 450mm Unbraced Cantilever HDG 620003 21
UC600 600mm Unbraced Cantilever HDG 620004 21
UC750 750mm Unbraced Cantilever HDG 21
UC150-SS 150mm Unbraced Cantilever 316 SS 621001 21
UC300-SS 300mm Unbraced Cantilever 316 SS 621002 21
UC450-SS 450mm Unbraced Cantilever 316 SS 621003 21
UC600-SS 600mm Unbraced Cantilever 316 SS 621004 21
UC750-SS 750mm Unbraced Cantilever 316 SS 621005 21
Part ID Description Binder Code
Page No.
BC150 150mm Braced Cantilever HDG 21
BC300 300mm Braced Cantilever HDG 620005 21
BC450 450mm Braced Cantilever HDG 620006 21
BC600 600mm Braced Cantilever HDG 620007 21
BC750 750mm Braced UltraStrut Cantilever HDG 620008 21
BC150-SS 150mm Braced Cantilever 316 SS 21
BC300-SS 300mm Braced Cantilever 316 SS 621006 21
BC450-SS 450mm Braced Cantilever 316 SS 621007 21
BC600-SS 600mm Braced Cantilever 316 SS 621008 21
BC750-SS 750mm Braced Cantilever 316 SS 621009 21
Part ID Description Binder Code
Page No.
UC150-KIT 150mm Unbraced Cantilever Kit HDG 21
UC300-KIT 300mm Unbraced Cantilever Kit HDG 622001 21
UC450-KIT 450mm Unbraced Cantilever Kit HDG 622002 21
UC600-KIT 600mm Unbraced Cantilever Kit HDG 622003 21
UC750-KIT 750mm Unbraced Cantilever Kit HDG 21
BC150-KIT 150mm Braced Cantilever Kit HDG 21
BC300-KIT 300mm Braced Cantilever Kit HDG 622004 21
BC450-KIT 450mm Braced Cantilever Kit HDG 622005 21
BC600-KIT 600mm Braced Cantilever Kit HDG 622006 21
BC750-KIT 750mm Braced U/Strut Cantilever Kit HDG 622007 21
Cantilever - Unbraced
Cantilever - Braced
Cantilever Kit
Part ID Description Binder Code
Page No.
BSC-1/4 1/4in Binsulclamp ZP 630000 36
BSC-3/8 3/8in Binsulclamp ZP 630001 36
BSC-1/2 1/2in Binsulclamp ZP 630002 36
BSC-5/8 5/8in Binsulclamp ZP 630003 36
BSC-3/4 3/4in Binsulclamp ZP 630004 36
BSC-7/8 7/8in Binsulclamp ZP 630005 36
BSC-1 1/8 1 1/8in Binsulclamp ZP 630006 36
BSC-1 3/8 1 3/8in Binsulclamp ZP 630007 36
BSC-1 5/8 1 5/8in Binsulclamp ZP 630008 36
BSC- 2 1/8 2 1/8in Binsulclamp ZP 630009 36
BSC-2 5/8 2 5/8in Binsulclamp ZP 630010 36
BSC-3 1/8 3 1/8in Binsulclamp ZP 630011 36
BSC-3 5/8 3 5/8in Binsulclamp ZP 630012 36
BSC-4 1/8 4 1/8in Binsulclamp ZP 630013 36
Binsul Clamp
Part ID Description Binder Code
Page No.
KS2600 Strip Isolation Barrier B2600 680000 47
KS1184 Strip Closure 3Mtr PVC B1184/PL 680002 47
Binder Strip Tape
BG106-80 80NB Light Duty Saddle Clamp HDG 106007 42
BG106-100 100NB Light Duty Saddle Clamp HDG 106008 42
BG106-125 125NB Light Duty Saddle Clamp HDG 106009 42
BG106-150 150NB Light Duty Saddle Clamp HDG 106010 42
BG106-200 200NB Light Duty Saddle Clamp HDG 106011 42
BG106-225 225NB Light Duty Saddle Clamp HDG 106012 42
BG106-250 250NB Light Duty Saddle Clamp HDG 106013 42
BG106-300 300NB Light Duty Saddle Clamp HDG 106014 42
BG106-350 350NB Light Duty Saddle Clamp HDG 106015 42
BG106-420 420NB Light Duty Saddle Clamp HDG 106016 42
BG106-450 450NB Light Duty Saddle Clamp HDG 106017 42
BG106-500 500NB Light Duty Saddle Clamp HDG 106018 42
BG106-600 600NB Light Duty Saddle Clamp HDG 106019 42
BG106-15CU 15CU Light Duty Saddle Clamp HDG 106100 42
BG106-20CU 20CU Light Duty Saddle Clamp HDG 106101 42
BG106-25CU 25CU Light Duty Saddle Clamp HDG 106102 42
BG106-32CU 32CU Light Duty Saddle Clamp HDG 106103 42
BG106-42CU 42CU Light Duty Saddle Clamp HDG 106104 42
BG106-50CU 50CU Light Duty Saddle Clamp HDG 106105 42
BG106-65CU 65CU Light Duty Saddle Clamp HDG 106106 42
BG106-80CU 80CU Light Duty Saddle Clamp HDG 106107 42
BG106-100CU 100CU Light Duty Saddle Clamp HDG 106108 42
BG106-125CU 125CU Light Duty Saddle Clamp HDG 106109 42
BG106-150CU 150CU Light Duty Saddle Clamp HDG 106110 42
BG106-200CU 200CU Light Duty Saddle Clamp HDG 106111 42
BG106-250CU 250CU Light Duty Saddle Clamp HDG 106112 42
BG106-300CU 300CU Light Duty Saddle Clamp HDG 106113 42
BG106-42P 42PVC Light Duty Saddle Clamp HDG 106200 42
BG106-50P 50PVC Light Duty Saddle Clamp HDG 106201 42
BG106-65P 65PVC Light Duty Saddle Clamp HDG 106202 42
BG106-80P 80PVC Light Duty Saddle Clamp HDG 106203 42
BG106-100P 100PVC Light Duty Saddle Clamp HDG 106204 42
BG106-150P 150PVC Light Duty Saddle Clamp HDG 106205 42
BG106-200P 200PVC Light Duty Saddle Clamp HDG 106206 42
BG106-225P 225PVC Light Duty Saddle Clamp HDG 106207 42
BG106-250P 250PVC Light Duty Saddle Clamp HDG 106208 42
BG106-300P 300PVC Light Duty Saddle Clamp HDG 106209 42
BG106-300-SS 300NB Light Duty Saddle Clamp S/S 106314 42
Index
78
Channels-Kwik-Smart
Channels-Ultrastrut
Part ID Description Binder Code
Page No.
KS1000 41 x 41 x 2.5mm GB 610009 09
KS1001 41 x 82 x 2.5mm GB 610017 13
KS1000T 41x41x 2.5mm Slotted GB 610013 09
KS2000 41 x 41 x 1.5mm GB 610010 14
KS2000T 41 x 41 x 1.5mm Slotted GB 14
KS3300 41 x 21 x 2.5mm GB 610011 11
KS3300T 41x21x 2.5mm Slotted GB 610018 11
KS4000 41 x 21 x 1.5mm GB 610012 15
KS4000T 41 x 21 x 1.5mm Slotted GB 15
KS1000-H 41 x 41 x 2.5mm HDG 610000 09
KS1001-H 41 x 82 x 2.5mm HDG 6M Ln 610001 13
KS3300-H 41 x 21 x 2.5mm HDG 610002 13
KS3301-H 41 x 43 x 2.5mm HDG 610003 13
KS5500-H 41 x 62 x 2.5mm HDG 610004 16
KS1000T-H 41x41x 2.5mm Slotted HDG 610005 09
KS3300T-H 41x21x 2.5mm Slotted HDG 610006 11
KS1000-SS 41 x 41 x 2.5mm 316SS 610007 09
KS3300-SS 41 x 21 x 2.5mm SS 610008 11
KS1000-M 41 x 41 x 2.5mm Mill 610014 09
KS2000-M 41 x 41 x 1.5mm Mill 610015 14
KS3300-M 41 x 21 x 2.5mm Mill 610016 11
KS1000CI Concrete Insert HDG 610019 17
Part ID Description Binder Code
Page No.
US1000 41 x 41 Channel GB 610038 08
US1000T 41 x 41 Channel Slotted GB 610039 08
US3300 41 x 21 Channel GB 610040 10
US3300T 41 x 21Channel Slotted GB 610041 10
US1000-H 41 x 41 Channel HDG 610020 08
US1000T-H 41 x 41 Channel Slotted HDG 610021 08
US3300-H 41 x 21 Channel HDG 610022 10
US3300T-H 41 x 21 Channel Slotted HDG 610023 10
US1001-H 41x 82 Channel HDG 610028 12
US3301-H 41x 42 Channel HDG 610030 12
US1000-SS 41 x 41 Channel S/S 610024 08
US1000T-SS 41 x 41 Channel Slotted S/S 610025 08
US3300-SS 41 x 21 Channel S/S 610026 10
US3300T-SS 41 x 21 Channel Slotted S/S 610027 10
US1001-SS 41x 82 Channel S/S 610029 12
US3301-SS 41x 42 Channel S/S 610031 12
US1000T-M Channel Slotted Mill 610032 08
US3300T-M Channel Slotted Mill 610033 08
US1001-M 41x 82 Channel Mill 610034 12
US3301-M 41x 42 Channel Mill 610035 12
US1000-M 41 x 41 Channel Mill 610036 10
US3300-M 41 x 21 Channel Mill 610037 10
Channel ClipsPart ID Description Binder
CodePage
No.KS2024 8mm Channel Clip ZP 600100 34
KS2025 11mm Channel Clip ZP 600101 34
KS2026 14mm Channel Clip ZP 600102 34
KS2027 17mm Channel Clip ZP 600103 34
KS1109 18mm Channel Clip ZP 600104 34
KS2028 19mm Channel Clip ZP 600105 34
KS1111 21mm Channel Clip ZP 600106 34
KS2029 22mm Channel Clip ZP 600107 34
KS2030 25mm Channel Clip ZP 600108 34
KS1112 27mm Channel Clip ZP 600109 34
KS2031 29mm Channel Clip ZP 600110 34
KS2034 34mm Channel Clip ZP 600111 34
KS1113 34mm Channel Clip ZP 600112 34
KS2033 35mm Channel Clip ZP 600113 34
KS2034 38mm Channel Clip ZP 600114 34
KS1114 42mm Channel Clip ZP 600115 34
KS2036 44mm Channel Clip ZP 600116 34
KS1115 48mm Channel Clip ZP 600117 34
KS2037 49mm Channel Clip ZP 600118 34
KS2038 51mm Channel Clip ZP 600119 34
KS2039 54mm Channel Clip ZP 600120 34
KS2040 57mm Channel Clip ZP 600121 34
KS1117 60mm Channel Clip ZP 600122 34
KS2042 64mm Channel Clip ZP 600123 34
KS2043 67mm Channel Clip ZP 600124 34
KS2044 70mm Channel Clip ZP 600125 34
KS1118 73mm Channel Clip ZP 600126 34
KS2046 76mm Channel Clip ZP 600127 34
KS2047 79mm Channel Clip ZP 600128 34
KS2048 83mm Channel Clip ZP 600129 34
KS2049 86mm Channel Clip ZP 600130 34
KS1119 90mm Channel Clip ZP 600131 34
KS2051 92mm Channel Clip ZP 600134 34
KS2052 95mm Channel Clip ZP 600133 34
KS2053 98mm Channel Clip ZP 600134 34
KS1120 102mm Channel Clip ZP 600135 34
KS2055 105mm Channel Clip ZP 600136 34
KS2056 108mm Channel Clip ZP 600137 34
KS2057 111mm Channel Clip ZP 600138 34
KS1121 114mm Channel Clip ZP 600139 34
KS2059 117mm Channel Clip ZP 600140 34
KS2060 121mm Channel Clip ZP 600141 34
KS2061 123mm Channel Clip ZP 600142 34
KS2062 127mm Channel Clip ZP 600143 34
KS2063 130mm Channel Clip ZP 600144 34
KS2064 133mm Channel Clip ZP 600145 34
KS2065 136mm Channel Clip ZP 600146 34
KS2066 140mm Channel Clip ZP 600147 34
KS2067 143mm Channel Clip ZP 600148 34
KS2068 146mm Channel Clip ZP 600149 34
KS2069 149mm Channel Clip ZP 600150 34
KS2070 152mm Channel Clip ZP 600151 34
KS2070-62 159mm Channel Clip ZP 600152 34
KS2070-64 165mm Channel Clip ZP 600153 34
KS2070-66 171mm Channel Clip ZP 600154 34
KS2070-70 178mm Channel Clip ZP 600155 34
KS2070-72 184mm Channel Clip ZP 600156 34
KS2070-74 191mm Channel Clip ZP 600157 34
KS2070-76 197mm Channel Clip ZP 600158 34
KS2070-80 203mm Channel Clip ZP 600159 34
Part ID Description Binder Code
Page No.
KS2072A Channel Base Fitting ZP 674030 24
KS2072B Channel Base Fitting ZP 674031 24
KS2073H Channel Base Fitting ZP 674032 24
KS2072A-H Channel Base Fitting HDG 672030 24
KS2072B-H Channel Base Fitting HDG 672031 24
KS2073H-H Channel Base Fitting HDG 672032 24
KS2072A-SS Channel Base Fitting G316 S/S 673030 24
KS2072B-SS Channel Base Fitting G316 S/S 673031 24
KS2072H-SS Channel Base Fitting G316 S/S 673032 24
Channel Base Fittings
index
Kwik-Smart 79
Channel Clip Copper Part ID Description Binder
CodePage
No.CCC-15 15Cu Channel Clip Powder Coated Brown 600500 35
CCC-20 20Cu Channel Clip Powder Coated Brown 600501 35
CCC-25 25Cu Channel Clip Powder Coated Brown 600502 35
CCC-32 32Cu Channel Clip Powder Coated Brown 600503 35
CCC-40 40Cu Channel Clip Powder Coated Brown 600504 35
CCC-50 50Cu Channel Clip Powder Coated Brown 600505 35
CCC-65 65Cu Channel Clip Powder Coated Brown 600506 35
CCC-80 80Cu Channel Clip Powder Coated Brown 600507 35
CCC-100 100Cu Channel Clip Powder Coated Brown 600508 35
CCC-125 125Cu Channel Clip Powder Coated Brown 600509 35
CCC-150 150Cu Channel Clip Powder Coated Brown 600510 35
CCC-200 200Cu Channel Clip Powder Coated Brown 600511 35
KS2070-76-H 197mm Channel Clip HDG 600758 34
KS2070-80-H 203mm Channel Clip HDG 600759 34
KS2070-84-H 216mm Channel Clip HDG 600760 34
KS2070-90-H 234mm Channel Clip HDG 600761 34
KS2070-100-H 252mm Channel Clip HDG 600762 34
KS2070-110-H 315mm Channel Clip HDG 600763 34
KS2024-SS 8mm Channel Clip SS 600200 34
KS2025-SS 11mm Channel Clip SS 600201 34
KS2026-SS 14mm Channel Clip SS 600202 34
KS2027-SS 17mm Channel Clip SS 600203 34
KS2028-SS 19mm Channel Clip SS 600205 34
KS2029-SS 22mm Channel Clip SS 600207 34
KS2030-SS 25mm Channel Clip SS 600208 34
KS1112-SS 27mm Channel Clip SS 600209 34
KS2031-SS 29mm Channel Clip SS 600210 34
KS2034-SS 34mm Channel Clip SS 600211 34
KS1113-SS 34mm Channel Clip SS 600212 34
KS2033-SS 35mm Channel Clip SS 600213 34
KS2034-SS 38mm Channel Clip SS 600214 34
KS1115-SS 48mm Channel Clip SS 600217 34
KS2037-SS 49mm Channel Clip SS 600218 34
KS2038-SS 51mm Channel Clip SS 600219 34
KS2039-SS 54mm Channel Clip SS 600220 34
KS2040-SS 57mm Channel Clip SS 600221 34
KS1117-SS 60mm Channel Clip SS 600222 34
KS2042-SS 64mm Channel Clip SS 600223 34
KS2043-SS 67mm Channel Clip SS 600224 34
KS2044-SS 70mm Channel Clip SS 600225 34
KS2046-SS 76mm Channel Clip SS 600227 34
KS2048-SS 83mm Channel Clip SS 600229 34
KS1119-SS 90mm Channel Clip SS 600231 34
KS2053-SS 98mm Channel Clip SS 600234 34
KS1120-SS 102mm Channel Clip SS 600235 34
KS2057-SS 111mm Channel Clip SS 600238 34
KS1121-SS 114mm Channel Clip SS 600239 34
KS2061-SS 123mm Channel Clip SS 600242 34
KS2063-SS 130mm Channel Clip SS 600244 34
KS2066-SS 140mm Channel Clip SS 600247 34
KS2070-SS 152mm Channel Clip SS 600251 34
KS2070-62-SS 159mm Channel Clip SS 600252 34
KS2070-64-SS 165mm Channel Clip SS 600253 34
KS2070-66-SS 171mm Channel Clip SS 600254 34
KS2070-84-SS 216mm Channel Clip SS 600260 34
KS2070-84 216mm Channel Clip ZP 600160 34
KS2070-90 234mm Channel Clip ZP 600161 34
KS2070-100 252mm Channel Clip ZP 600162 34
KS2070-110 315mm Channel Clip ZP 600163 34
KS2024-H 8mm Channel Clip HDG 600700 34
KS2025-H 11mm Channel Clip HDG 600701 34
KS2026-H 14mm Channel Clip HDG 600702 34
KS2027-H 17mm Channel Clip HDG 600703 34
KS1109-H 18mm Channel Clip HDG 600704 34
KS2028-H 19mm Channel Clip HDG 600705 34
KS1111-H 21mm Channel Clip HDG 600706 34
KS2029-H 22mm Channel Clip HDG 600707 34
KS2030-H 25mm Channel Clip HDG 600708 34
KS1112-H 27mm Channel Clip HDG 600709 34
KS203-H 29mm Channel Clip HDG 600710 34
KS2034-H 34mm Channel Clip HDG 600711 34
KS1113-H 34mm Channel Clip HDG 600712 34
KS2033-H 35mm Channel Clip HDG 600713 34
KS2034-H 38mm Channel Clip HDG 600714 34
KS1114-H 42mm Channel Clip HDG 600715 34
KS2036-H 44mm Channel Clip HDG 600716 34
KS1115-H 48mm Channel Clip HDG 600717 34
KS2037-H 49mm Channel Clip HDG 600718 34
KS2038-H 51mm Channel Clip HDG 600719 34
KS2039-H 54mm Channel Clip HDG 600720 34
KS2040-H 57mm Channel Clip HDG 600721 34
KS1117-H 60mm Channel Clip HDG 600722 34
KS2042-H 64mm Channel Clip HDG 600723 34
KS2043-H 67mm Channel Clip HDG 600724 34
KS2044-H 70mm Channel Clip HDG 600725 34
KS1118-H 73mm Channel Clip HDG 600726 34
KS2046-H 76mm Channel Clip HDG 600727 34
KS2047-H 79mm Channel Clip HDG 600728 34
KS2048-H 83mm Channel Clip HDG 600729 34
KS2049-H 86mm Channel Clip HDG 600730 34
KS1119-H 90mm Channel Clip HDG 600731 34
KS2051-H 92mm Channel Clip HDG 600734 34
KS2052-H 95mm Channel Clip HDG 600733 34
KS2053-H 98mm Channel Clip HDG 600734 34
KS1120-H 102mm Channel Clip HDG 600735 34
KS2055-H 105mm Channel Clip HDG 600736 34
KS2056-H 108mm Channel Clip HDG 600737 34
KS2057-H 111mm Channel Clip HDG 600738 34
KS1121-H 114mm Channel Clip HDG 600739 34
KS2059-H 117mm Channel Clip HDG 600740 34
KS2060-H 121mm Channel Clip HDG 600741 34
KS2061-H 123mm Channel Clip HDG 600742 34
KS2062-H 127mm Channel Clip HDG 600743 34
KS2063-H 130mm Channel Clip HDG 600744 34
KS2064-H 133mm Channel Clip HDG 600745 34
KS2065-H 136mm Channel Clip HDG 600746 34
KS2066-H 140mm Channel Clip HDG 600747 34
KS2067-H 143mm Channel Clip HDG 600748 34
KS2068-H 146mm Channel Clip HDG 600749 34
HS2069-H 149mm Channel Clip HDG 600750 34
KS2070-H 152mm Channel Clip HDG 600751 34
KS2070-62-H 159mm Channel Clip HDG 600752 34
HS2070-64-H 165mm Channel Clip HDG 600753 34
KS2070-66-H 171mm Channel Clip HDG 600754 34
KS2070-70-H 178mm Channel Clip HDG 600755 34
KS2070-72-H 184mm Channel Clip HDG 600756 34
KS2070-74-H 191mm Channel Clip HDG 600757 34
Index
80
Channel Clip PVC
Channel Clip Pressure
Channel Clip - Press Pipe Clip
Part ID Description Binder Code
Page No.
CCP-40 40PVC Channel Clip Powder Coated White 600600 35
CCP-50 50PVC Channel Clip Powder Coated White 600601 35
CCP-65 65PVC Channel Clip Powder Coated White 600602 35
CCP-80 80PVC Channel Clip Powder Coated White 600603 35
CCP-90 90PVC Channel Clip Powder Coated White 600604 35
CCP-100 100PVC Channel Clip Powder Coated White 600605 35
CCP-150 150PVC Channel Clip Powder Coated White 600606 35
CCP-225 225PVC Channel Clip Powder Coated White 600607 35
CCP-300 300PVC Channel Clip Powder Coated White 600608 35
CCP-375 375PVC Channel Clip Powder Coated White 600609 35
Part ID Description Binder Code
Page No.
PCP-15 15PVC Pressure Channel Clip PC White 600610 36
PCP-20 20PVC Pressure Channel Clip PC White 600611 36
PCP-25 25PVC Pressure Channel Clip PC White 600612 36
PCP-32 32PVC Pressure Channel Clip PC White 600613 36
PCP-40 40PVC Pressure Channel Clip PC White 600614 36
PCP-50 50PVC Pressure Channel Clip PC White 600615 36
PCP-65 65PVC Pressure Channel Clip PC White 600616 36
PCP-80 80PVC Pressure Channel Clip PC White 600617 36
PCP-100 100PVC Pressure Channel Clip PC White 600618 36
Part ID Description Binder Code
Page No.
KS109-40 Press Pipe Clip Powder Coated 600400 38
KS109-50 Press Pipe Clip Powder Coated 600401 38
KS109-80 Press Pipe Clip Powder Coated 600402 38
KS109-100 Press Pipe Clip Powder Coated 600403 38
KS109-150 Press Pipe Clip Powder Coated 600404 38
KS109-200 Press Pipe Clip Powder Coated 600405 38
KS109-250 Press Pipe Clip Powder Coated 600406 38
KS109-300 Press Pipe Clip Powder Coated 600407 38
Part ID Description Binder Code
Page No.
KS 2240 End Cap (for KS1000) Grey PVC 680003 16
KS4240 End Cap (for KS3300) Grey PVC 680004 16
KS2240-W End Cap (for KS1000) White PVC 680005 16
KS680001 Bindersil Tape - Seal 50mm x 10m / Roll 680001 16
Channel End Cap
Part ID Description Binder Code
Page No.
KS2484 Channel Fitting ZP 672037 23
KS1031 Channel Fitting ZP 674000 23
KS1033 Channel Fitting ZP 674001 23
KS1036 Channel Fitting ZP 674004 23
KS1045 Channel Fitting ZP 674007 22
KS1047 Channel Fitting ZP 674008 22
KS1065 Channel Fitting ZP 674009 23
KS1066 Channel Fitting ZP 674010 23
KS1067 Channel Fitting ZP 674011 23
KS1325 Channel Fitting ZP 674013 23
Channel Fittings
KS1326 Channel Fitting ZP 674014 23
KS1386 Channel Fitting ZP 674018 23
KS1386 Channel Fitting ZP 672019 25
KS2577 Splice Plate ZP 672025 25
KS2855 Channel Fitting ZP 672026 25
KS1026-H M10 Angle Cleat HDG 670102 23
KS1031-H Channel Fitting HDG 672000 23
KS1033-H Channel Fitting HDG 672001 24
KS1034-H Channel Fitting HDG 672002 24
KS1035-H Channel Fitting HDG 672003 23
KS1036-H Channel Fitting HDG 672004 23
KS1037-H Channel Fitting HDG 672005 23
KS1038-H Channel Fitting HDG 672006 24
KS1045-H Channel Fitting HDG 672007 24
KS1047-H Channel Fitting HDG 672008 23
KS1065-H Channel Fitting HDG 672009 23
KS1066-H Channel Fitting HDG 672010 23
KS1067-H Channel Fitting HDG 672011 23
KS1186-H Channel Fitting HDG 672012 23
KS1325-H Channel Fitting HDG 672013 23
KS1326-H Channel Fitting HDG 672014 23
KS1357-H Channel Fitting HDG 672015 24
KS1358-H Channel Fitting HDG 672016 23
KS1359-H Channel Fitting HDG 672017 24
KS1386-H Channel Fitting HDG 672018 25
KS1942-H Channel Fitting HDG 672020 23
KS2301-H Channel Fitting HDG 672023 23
KS2303-H Channel Fitting HDG 672024 23
KS2306-H Channel Fitting HDG 672025 23
KS2308-H Channel Fitting HDG 672024 24
KS2484-H Channel Fitting HDG 672027 23
KS4045-H Channel Fitting HDG 672028 24
KS4047-H Channel Fitting HDG 672029 24
KS1031-SS Channel Fitting G316 S/S 673000 23
KS1035-SS Channel Fitting G316 S/S 673003 23
KS1036-SS Channel Fitting G316 S/S 673004 23
KS1037-SS Channel Fitting G316 S/S 673005 23
KS1045-SS Channel Fitting G316 S/S 673007 24
KS1047-SS Channel Fitting G316 S/S 673008 24
KS1065-SS Channel Fitting G316 S/S 673009 23
KS1066-SS Channel Fitting G316 S/S 673010 23
KS1067-SS Channel Fitting G316 S/S 673011 23
KS1325-SS Channel Fitting G316 S/S 673013 23
KS1326-SS Channel Fitting G316 S/S 673014 23
KS1386-SS Beam Clamp G316 S/S 673018 25
KS2484-SS Channel Fitting G316 S/S 673027 23
KS4045-SS Channel Fitting G316 S/S 673028 24
KS4047-SS Channel Fitting G316 S/S 673029 24
Part ID Description Binder Code
Page No.
KS3006 M6 Channel Nut ZP 643000 31
KS3007 M8 Channel Nut ZP 643001 31
KS3008 M10 Channel Nut ZP 643002 31
KS3010 M12 Channel Nut ZP 643003 31
KS3012 M16 Channel Nut ZP 643004 31
KS3016 M6 Butterfly Nut ZP 643005 31
KS3007-H M08 Channel Nut HDG 644001 31
KS3008-H M10 Channel Nut HDG 644002 31
KS3010-H M12 Channel Nut HDG 644003 31
KS3012-H M16 Channel Nut HDG 644004 31
Channel Nut
index
Kwik-Smart 81
Part ID Description Binder Code
Page No.
FC-06 Flange Clamp M06 - D 374001 31
FC-08 Flange Clamp M08 - D 374002 31
FC-08 Flange Clamp M08 - T 374003 31
FC-10 Flange Clamp M10 - D (ZP) 374004 31
FC-12 Flange Clamp M12 - D (ZP) 374006 31
Part ID Description Binder Code
Page No.
KS4006 M6 Channel Spring Nut Short ZP 646000 31
KS4007 M8 Channel Spring Nut Short ZP 646001 31
KS4008 M10 Channel Spring Nut Short ZP 646002 31
KS4010 M12 Channel Spring Nut Short ZP 646003 31
KS4012 M16 Channel Spring Nut Short ZP 646004 31
KS3016 M6 Butterfly Nut ZP 643005 31
KS3007-H M08 Channel Nut HDG 644001 31
KS3008-H M10 Channel Nut HDG 644002 31
KS3010-H M12 Channel Nut HDG 644003 31
KS3012-H M16 Channel Nut HDG 644004 31
KS3006-SS M6 Channel Nut SS 645000 31
KS3007-SS M8 Channel Nut SS 645001 31
KS3008-SS M10 Channel Nut SS 645002 31
Channel Spring Nut Short
Part ID Description Binder Code
Page No.
KS1006 M6 Channel Spring Nut ZP 640000 31
KS1007 M8 Channel Spring Nut ZP 640001 31
KS1008 M10 Channel Spring Nut ZP 640002 31
KS1010 M12 Channel Spring Nut ZP 640003 31
KS1012 M16 Channel Spring Nut ZP 640004 31
KS1006-H M6 Channel Spring Nut HDG 641000 31
KS1007-H M8 Channel Spring Nut HDG 641001 31
KS1008-H M10 Channel Spring Nut HDG 641002 31
KS1010-H M12 Channel Spring Nut HDG 641003 31
KS1012-H M16 Channel Spring Nut HDG 641004 31
KS1007-SS M8 Channel Spring Nut SS 642001 31
KS1008-SS M10 Channel Spring Nut SS 642002 31
KS1010-SS M12 Channel Spring Nut SS 642003 31
Channel Spring Nut
KS3006-SS M6 Channel Nut SS 645000 31
KS3007-SS M8 Channel Nut SS 645001 31
KS3008-SS M10 Channel Nut SS 645002 31
Part ID Description Binder Code
Page No.
CH10 M10 Clevis Hanger HDG 670002 33
CH12 M12 Clevis Hanger HDG 670004 33
Clevis Hanger
D
F
G
Part ID Description Binder Code
Page No.
KS12-25 25HDPE Dual Clip 613100 37
KS12-32 32HDPE Dual Clip 613101 37
KS12-40 40HDPE Dual Clip 613102 37
KS12-50 50HDPE Dual Clip 613103 37
KS12-63 63HDPE Dual Clip 613104 37
KS12-75 75HDPE Dual Clip 613105 37
KS12-80 80HDPE Dual Clip 613106 37
KS12-90 90HDPE Dual Clip 613107 37
KS12-110 110HDPE Dual Clip 613108 37
KS12-160 160H & 150PVC Dual Clip 613109 37
Dual Clip
Drop Anchor
Part ID Description Binder Code
Page No.
FF-08 M08 Floorfix Clip HDG 369001 68
FF-10 M10 Floorfix Clip HDG 369002 68
FF-12 M12 Floorfix Clip HDG 369003 68
Part ID Description Binder Code
Page No.
FF-08HT M08 Floorfix Clip HT HDG 369004 68
FF-10HT M10 Floorfix Clip HT HDG 369005 68
FF-12HT M12 Floorfix Clip HT HDG 369006 68
FF - Floorfix Clip
FF - Floorfix Clip HT
Part ID Description Binder Code
Page No.
FB40-P 40PVC Filbow Powder Coated White 616000 38
FB50-P 50PVC Filbow Powder Coated White 616001 38
FB65-P 65PVC Filbow Powder Coated White 616002 38
FB80-P 80PVC Filbow Powder Coated White 616003 38
FB100-P 100PVC Filbow Powder Coated White 616004 38
FB150-P 150PVC Filbow Powder Coated White 616005 38
FB225-P 225PVC Filbow Powder Coated White 616006 38
FB300-P 300PVC Filbow Powder Coated White 616007 38
Filbow
Part ID Description Binder Code
Page No.
FW06-H M06 Flat Washer CS HDG 902525 31
FW08-H M08 Flat Washer CS HDG 902526 31
FW10-H M10 Flat Washer CS HDG 902527 31
FW12-H M12 Flat Washer CS HDG 902528 31
FW16-H M16 Flat Washer CS HDG 902531 31
FW06 M06 Flat Washer CS Zinc 902550 31
FW08 M08 Flat Washer CS Zinc 902551 31
FW10 M10 Flat Washer CS Zinc 902552 31
FW12 M12 Flat Washer CS Zinc 902553 31
FW16 M16 Flat Washer CS Zinc 902554 31
Flat Washer
Part ID Description Binder Code
Page No.
GRAT-08 Grating Clip 370001 67
Part ID Description Binder Code
Page No.
GF-02 Grating Fix 370003 66
Grating Clip
Grating FixPart ID Description Binder Code
Page No.
DIA0625 M6 X 25 Drop In Anchor ZP 909000 33
DIA0825 M8 X 25 Drop In Anchor ZP 909001 33
DIA1030 M10 X 30 Drop In Anchor ZP (Flanged) 909002 33
DIA1040 M10 X 40 Drop In Anchor ZP 909003 33
DIA1050 M10 X 50 Drop In Anchor ZP 909004 33
DIA1250 M12 X 50 Drop In Anchor ZP 909005 33
Flange Clamp
Index
82
H
Part ID Description Binder Code
Page No.
HB1080 M10 X 80 Hanger Bolt ZP 909100 32
HB10100 M10 X 100 Hanger Bolt ZP 909101 32
HB10120 M10 X 120 Hanger Bolt ZP 909102 32
HB10140 M10 X 140 Hanger Bolt ZP 909103 32
Hanger Bolt
Part ID Description Binder Code
Page No.
HHS0620 M6 X 20 Hex Bolt Gr. 4.6 Zinc 900883 32
HHS0625 M6 X 25 Hex Bolt Gr. 4.6 Zinc 900884 32
HHS0650 M6 X 50 Hex Bolt Gr. 4.6 Zinc 900889 32
HHS0825 M8 X 25 Hex Bolt Gr. 4.6 Zinc 900911 32
HHS0839 M8 X 30 Hex Bolt Gr. 4.6 Zinc 900912 32
HHS0840 M8 X 40 Hex Bolt Gr. 4.6 Zinc 900914 32
HHS1020 M10 X 20 Hex Bolt Gr. 4.6 Zinc 900935 32
HHS1025 M10 X 25 Hex Bolt Gr. 4.6 Zinc 900936 32
HHS1030 M10 X 30 Hex Bolt Gr. 4.6 Zinc 900937 32
HHS1040 M10 X 40 Hex Bolt Gr. 4.6 Zinc 900939 32
HHS1045 M10 X 45 Hex Bolt Gr. 4.6 Zinc 900940 32
HHS1050 M10 X 50 Hex Bolt Gr. 4.6 Zinc 900941 32
HHS1060 M10 X 60 Hex Bolt Gr. 4.6 Zinc 900943 32
HHS1225 M12 X 25 Hex Bolt Gr. 4.6 Zinc 900971 32
HHS1230 M12 X 30 Hex Bolt Gr. 4.6 Zinc 900972 32
HHS1240 M12 X 40 Hex Bolt Gr. 4.6 Zinc 900974 32
HHS1250 M12 X 50 Hex Bolt Gr. 4.6 Zinc 900976 32
HHS1260 M12 X 60 Hex Bolt Gr. 4.6 Zinc 900978 32
HHS1280 M12 X 80 Hex Bolt Gr. 4.6 Zinc 900982 32
HHS1640 M16 X 40 Hex Bolt Gr. 4.6 Zinc 901014 32
HHS1650 M16 X 50 Hex Bolt Gr. 4.6 Zinc 901016 32
HHS1660 M16 X 60 Hex Bolt Gr. 4.6 Zinc 901018 32
HHS1665 M16 X 65 Hex Bolt Gr. 4.6 Zinc 901019 32
HHS1670 M16 X 70 Hex Bolt Gr. 4.6 Zinc 901020 32
HHS1675 M16 X 75 Hex Bolt Gr. 4.6 Zinc 901021 32
HHS1680 M16 X 80 Hex Bolt Gr. 4.6 Zinc 901022 32
HHS1690 M16 X 90 Hex Bolt Gr. 4.6 Zinc 901024 32
HHS16120 M16 X 120 Hex Bolt Gr. 4.6 Zinc 901027 32
HHS16150 M16 X 150 Hex Bolt Gr. 4.6 Zinc 901030 32
HHS0612-H M6 X 12 Hex Bolt Gr. 4.6 HDG 900602 32
HHS0620-H M6 X 20 Hex Bolt Gr. 4.6 HDG 900604 32
HHS0625-H M6 X 25 Hex Bolt Gr. 4.6 HDG 900605 32
HHS0630-H M6 X 30 HEX BOLT Gr. 4.6 HDG 900606 32
HHS0640-H M6 X 40 Hex Bolt Gr. 4.6 HDG 900608 32
HHS0645-H M6 X 45 Hex Bolt Gr. 4.6 HDG 900609 32
HHS0650-H M6 X 50 Hex Bolt Gr. 4.6 HDG 900610 32
HHS0655-H M6 X 55 Hex Bolt Gr. 4.6 HDG 900611 32
HHS0825-H M8 X 25 Hex Bolt Gr. 4.6 HDG 900627 32
HHS0830-H M8 X 30 Hex Bolt Gr. 4.6 HDG 900628 32
HHS0835-H M8 X 35 Hex Bolt Gr. 4.6 HDG 900629 32
HHS0840-H M8 X 40 Hex Bolt Gr. 4.6 HDG 900630 32
HHS0850-H M8 X 50 Hex Bolt Gr. 4.6 HDG 900632 32
HHS1020-H M10 X 20 Hex Bolt Gr. 4.6 HDG 900648 32
HHS1025-H M10 X 25 Hex Bolt Gr. 4.6 HDG 900649 32
HHS1030-H M10 X 30 Hex Bolt Gr. 4.6 HDG 900650 32
HHS1035-H M10 X 35 Hex Bolt Gr. 4.6 HDG 900651 32
HHS1040-H M10 X 40 Hex Bolt Gr. 4.6 HDG 900652 32
HHS1045-H M10 X 45 Hex Bolt Gr. 4.6 HDG 900653 32
HHS1050-H M10 X 50 Hex Bolt Gr. 4.6 HDG 900654 32
HHS1060-H M10 X 60 Hex Bolt Gr. 4.6 HDG 900656 32
Hex Bolt
HHS1070-H M10 X 70 Hex Bolt Gr. 4.6 HDG 900658 32
HHS1075-H M10 X 75 Hex Bolt Gr. 4.6 HDG 900659 32
HHS1080-H M10 X 80 Hex Bolt Gr. 4.6 HDG 900660 32
HHS1090-H M10 X 90 Hex Bolt Gr. 4.6 HDG 900661 32
HHS10100-H M10 X 100 Hex Bolt Gr. 4.6 HDG 900662 32
HHS1225-H M12 X 25 Hex Bolt Gr. 4.6 HDG 900681 32
HHS1230-H M12 X 30 Hex Bolt Gr. 4.6 HDG 900682 32
HHS1235-H M12 X 35 Hex Bolt Gr. 4.6 HDG 900683 32
HHS1240-H M12 X 40 Hex Bolt Gr. 4.6 HDG 900684 32
HHS1245-H M12 X 45 Hex Bolt Gr. 4.6 HDG 900685 32
HHS1250-H M12 X 50 Hex Bolt Gr. 4.6 HDG 900686 32
HHS1255-H M12 X 55 Hex Bolt Gr. 4.6 HDG 900687 32
HHS1260-H M12 X 60 Hex Bolt Gr. 4.6 HDG 900688 32
HHS1265-H M12 X 65 Hex Bolt Gr. 4.6 HDG 900689 32
HHS1270-H M12 X 70 Hex Bolt Gr. 4.6 HDG 900690 32
HHS1280-H M12 X 80 Hex Bolt Gr. 4.6 HDG 900692 32
HHS0620-SS M6 X 20 Hex Bolt SS 316 903034 32
HHS0625-SS M6 X 25 Hex Bolt SS 316 903035 32
HHS0840-SS M8 X 40 Hex Bolt SS 316 903065 32
HHS1020-SS M10 X 20 Hex Bolt SS 316 903086 32
HHS1030-SS M10 X 30 Hex Bolt SS 316 903088 32
HHS1040-SS M10 X 40 Hex Bolt SS 316 903090 32
HHS1045-SS M10 X 45 Hex Bolt SS 316 903091 32
HHS1050-SS M10 X 50 Hex Bolt SS 316 903092 32
HHS1055-SS M10 X 55 Hex Bolt SS 316 903093 32
HHS1075-SS M10 X 75 Hex Bolt SS 316 903097 32
HHS1240-SS M12 X 40 Hex Bolt SS 316 903125 32
HHS1245-SS M12 X 45 Hex Bolt SS 316 903126 32
HHS1250-SS M12 X 50 Hex Bolt SS 316 903127 32
HHS1255-SS M12 X 55 Hex Bolt SS 316 903128 32
HHS1260-SS M12 X 60 Hex Bolt SS 316 903129 32
HHS1270-SS M12 X 70 Hex Bolt SS 316 903131 32
HHS1275-SS M12 X 75 Hex Bolt SS 316 903132 32
HHS1290-SS M12 X 90 Hex Bolt SS 316 903134 32
HHS12110-SS M12 X 110 Hex Bolt SS 316 903136 32
HHS12120-SS M12 X 120 Hex Bolt SS 316 903137 32
HHS12130-SS M12 X 130 Hex Bolt SS 316 903138 32
HHS12150-SS M12 X 150 Hex Bolt SS 316 903140 32
HHS1650-SS M16 X 50 Hex Bolt SS 316 903167 32
HHS1660-SS M16 X 60 Hex Bolt SS 316 903169 32
HHS1665-SS M16 X 65 Hex Bolt SS 316 903170 32
HHS1670-SS M16 X 70 Hex Bolt SS 316 903171 32
HHS1675-SS M16 X 75 Hex Bolt SS 316 903172 32
HHS1680-SS M16 X 80 Hex Bolt SS 316 903173 32
HHS16100-SS M16 X 100 Hex Bolt SS 316 903176 32
Part ID Description Binder Code
Page No.
HN06 M06 Hex Nut CL.8 Zinc 900100 32
HN08 M08 Hex Nut CL.8 Zinc 900101 32
HN10 M10 Hex Nut CL.8 Zinc 900102 32
HN12 M12 Hex Nut CL.8 Zinc 900103 32
HN16 M16 Hex Nut CL.8 Zinc 900104 32
HN06-H M06 Hex Nut CL.8 HDG 901530 32
HN08-H M08 Hex Nut CL.8 HDG 901531 32
HN10-H M10 Hex Nut CL.8 HDG 901532 32
Part ID Description Binder Code
Page No.
HC10 M10 Hex Connector Zinc 206015 33
HC12 M12 Hex Connector Zinc 206016 33
HC16 M16 Hex Connector Zinc 206017 33
Hex Connector
Hex Nut
index
Kwik-Smart 83
HN12-H M12 Hex Nut CL.8 HDG 901533 32
HN16-H M16 Hex Nut CL.8 HDG 901534 32
HN20-H M20 Hex Nut CL.8 HDG 901535 32
HN24-H M24 Hex Nut CL.8 HDG 901536 32
HN06-SS M06 Hex Nut CL.A4 (SS316) 901550 32
HN08-SS M08 Hex Nut CL.A4 (SS316) 901551 32
HN10-SS M10 Hex Nut CL.A4 (SS316) 901552 32
HN12-SS M12 Hex Nut CL.A4 (SS316) 901553 32
HN16-SS M16 Hex Nut CL.A4 (SS316) 901554 32
K
L
M
N
P
Part ID Description Binder Code
Page No.
KS10-15 15Cu 12-14 Kwik Clip 613200 37
KS10-20 20Cu 15-19 Kwik Clip 613201 37
KS10-25 25Cu 24-26 Kwik Clip 613202 37
KS10-32 32Cu 30-33 Kwik Clip 613203 37
KS10-40 40Cu & PVC Kwik Clip 613204 37
KS10-50 50Cu & PVC Kwik Clip 613205 37
KS10-65 65Cu 63-67 Kwik Clip 613206 37
KS10P-65 65PVC 70-73 Kwik Clip 613207 37
KS10-80 80Cu 74 - 80 Kwik Clip 613208 37
KS10-100 100Cu 101-106 Kwik Clip 613209 37
KS10P-100 100PVC 108-114 Kwik Clip 613210 37
KS10P-150 150PVC 159-164 Kwik Clip 613211 37
KS10P-80 80PVC 83-91 Kwik Clip 613212 37
KS10SS-15 15Cu 15-18 Kwik Clip SS 613300 37
KS10SS-20 20Cu 20-24 Kwik Clip SS 613301 37
KS10SS-25 25Cu 26-30 Kwik Clip SS 613302 37
KS10SS-32 32Cu 32-36 Kwik Clip SS 613303 37
KS10SS-40 40Cu 38-42 Kwik Clip SS 613304 37
KS10SS-50 50Cu 51-55 Kwik Clip SS 613305 37
KS10SS-65 65PVC 67-73 Kwik Clip SS 613312 37
KS10SS-150 150PVC 159-165 Kwik Clip SS 613315 37
Kwik Clip Mud Guard Washers
Lock Washers
Part ID Description Binder Code
Page No.
LN06-H M06 Lock Nut CL.5 HDG 901976 31
LN08-H M08 Lock Nut CL.5 HDG 901977 31
LN10-H M10 Lock Nut CL.5 HDG 901978 31
LN12-H M12 Lock Nut CL.5 HDG 901979 31
LN16-H M16 Lock Nut CL.5 HDG 901980 31
LN06-SS M06 Lock Nut CL.A4 (SS316) 903600 31
LN08-SS M08 Lock Nut CL.A4 (SS316) 903601 31
LN10-SS M10 Lock Nut CL.A4 (SS316) 903602 31
LN12-SS M12 Lock Nut CL.A4 (SS316) 903603 31
LN16-SS M16 Lock Nut CL.A4 (SS316) 903604 31
Part ID Description Binder Code
Page No.
NLN06-SS M06 Nylock Lock Nut (SS316) 903616 31
NLN08-SS M08 Nylock Lock Nut (SS316) 903617 31
NLN10-SS M10 Nylock Lock Nut (SS316) 903618 31
NLN12-SS M12 Nylock Lock Nut (SS316) 903619 31
NLN16-SS M16 Nylock Lock Nut (SS316) 903620 31
Part ID Description Binder Code
Page No.
MW-1/4 x 3/4 Mud Guard Washer 32
MW-1/4 x 1 Mud Guard Washer 32
MW-1/4 x 1 1/4 Mud Guard Washer 32
MW-3/8 x1 1/4 Mud Guard Washer 32
Part ID Description Binder Code
Page No.
LW06 Lock Washer 32
LW08 Lock Washer 32
LW10 Lock Washer 32
LW12 Lock Washer 32
LW16 Lock Washer 32
Lock Nut
Lock Nut - Nylock
Part ID Description Binder Code
Page No.
NC15-C 15Cu Nut Clip Powder Coated Brown 614100 38
NC20-C 20Cu Nut Clip Powder Coated Brown 614101 38
NC25-C 25Cu Nut Clip Powder Coated Brown 614102 38
NC32-C 32Cu Nut Clip Powder Coated Brown 614103 38
NC40-C 40Cu Nut Clip Powder Coated Brown 614104 38
NC50-C 50Cu Nut Clip Powder Coated Brown 614105 38
NC65-C 65Cu Nut Clip Powder Coated Brown 614106 38
NC80-C 80Cu Nut Clip Powder Coated Brown 614107 38
NC100-C 100Cu Nut Clip Powder Coated Brown 614108 38
NC125-C 125Cu Nut Clip Powder Coated Brown 614109 38
NC150-C 150Cu Nut Clip Powder Coated Brown 614110 38
NC40-P 40PVC Nut Clip Powder Coated White 614200 38
NC50-P 50PVC Nut Clip Powder Coated White 614201 38
NC-65-P 65PVC Nut Clip Powder Coated White 614202 38
NC80-P 80PVC Nut Clip Powder Coated White 614203 38
NC90-P 90PVC Nut Clip Powder Coated White 614204 38
NC100-P 100PVC Nut Clip Powder Coated White 614205 38
NC150-P 150PVC Nut Clip Powder Coated White 614206 38
Nut Clip
Part ID Description Binder Code
Page No.
PE-10x13x35 PE Block 10ID x 13mm Wall 35OD 682022 45
PE-13x13x38 PE Block 13ID x 13mm Wall 38OD 682023 45
PE-16x14x42 PE Block 16ID x 13mm Wall 42OD 682024 45
PE-19x13x44 PE Block 19ID x 13mm Wall 44OD 682025 45
PE-22x13x48 PE Block 22ID x 13mm Wall 48OD 682026 45
PE-25x13x51 PE Block 25ID x 13mm Wall 51OD 682027 45
PE-28x13x54 PE Block 28ID x 13mm Wall 54OD 682028 45
PE-32x13x57 PE Block 32ID x 13mm Wall 57OD 682029 45
PE-35x13x60 PE Block 35ID x 13mm Wall 60OD 682030 45
PE-38x13x64 PE Block 38ID x 13mm Wall 64OD 682031 45
PE-42x13x67 PE Block 42ID x 13mm Wall 67OD 682032 45
PE-45x13x70 PE Block 45ID x 13mm Wall 70OD 682033 45
PE-48x13x73 PE Block 48ID x 13mm Wall 73OD 682034 45
PE-51x13x76 PE Block 51ID x 13mm Wall 76OD 682035 45
PE-54x13x79 PE Block 54ID x 13mm Wall 79OD 682036 45
PE-57x13x83 PE Block 57ID x 13mm Wall 83OD 682037 45
PE-60x13x86 PE Block 60ID x 13mm Wall 86OD 682038 45
PE-64x13x90 PE Block 64ID x 13mm Wall 90OD 682039 45
PE Block
Index
84
PE-67x13x92 PE Block 67ID x 13mm Wall 92OD 682040 43
PE-73x13x98 PE Block 73ID x 13mm Wall 98OD 682041 43
PE-76x13x102 PE Block 76ID x 13mm Wall 102OD 682042 43
PE-10x19x48 PE Block 10ID x 19mm Wall 48OD 682001 43
PE-13x19x51 PE Block 13ID x 19mm Wall 51OD 682002 43
PE-16x19x54 PE Block 16ID x 19mm Wall 54OD 682003 43
PE-19x19x57 PE Block 19ID x 19mm Wall 57OD 682004 43
PE-22x19x60 PE Block 22ID x 19mm Wall 60OD 682005 43
PE-28x19x66 PE Block 28ID x 19mm Wall 66OD 682006 43
PE-35x19x74 PE Block 35ID x 19mm Wall 73OD 682007 43
PE-42x19x74 PE Block 42ID x 19mm Wall 74OD 682008 43
PE-54x19x92 PE Block 54ID x 19mm Wall 92OD 682009 43
PE-38x19x76 PE Block 38ID x 19mm Wall 76OD 682010 43
PE-24x19x79 PE Block 42ID x 19mm Wall 79OD 682011 43
PE-45x19x83 PE Block 45ID x 19mm Wall 83OD 682012 43
PE-48x19x86 PE Block 48ID x 19mm Wall 86OD 682013 43
PE-51x19x90 PE Block 51ID x 19mm Wall 90OD 682014 43
PE-54x19x92 PE Block 54ID x 19mm Wall 92OD 682015 43
PE-57x19x95 PE Block 57ID x 19mm Wall 95OD 682016 43
PE-60x19x98 PE Block 60ID x 19mm Wall 98OD 682017 43
PE-64x19x102 PE Block 64ID x 19mm Wall 102OD 682018 43
PE-67x19x105 PE Block 67ID x 19mm Wall 105OD 682019 43
PE-73x19x111 PE Block 73ID x 19mm Wall 111OD 682020 43
PE-76x19x114 PE Block 76ID x 19mm Wall 114OD 682021 43
PE-10x25x60 PE Block 10ID x 25mm Wall 60OD 682043 43
PE-13x25x68 PE Block 13ID x 25mm Wall 68OD 682044 43
PE-16x25x64 PE Block 16ID x 25mm Wall 64OD 682045 43
PE-19x25x77 PE Block 19ID x 25mm Wall 77OD 682046 43
PE-22x25x73 PE Block 22ID x 25mm Wall 73OD 682047 43
PE-25x25x80 PE Block 25ID x 25mm Wall 80OD 682048 43
PE-28x25x79 PE Block 28ID x 25mm Wall 79OD 682049 43
PE-32x25x86 PE Block 32ID x 25mm Wall 86OD 682050 43
PE-35x25x86 PE Block 35ID x 25mm Wall 86OD 682051 43
PE-38x25x93 PE Block 38ID x 25mm Wall 93OD 682052 43
PE-42x25x92 PE Block 42ID x 25mm Wall 92OD 682053 43
PE-45x25x95 PE Block 45ID x 25mm Wall 95OD 682054 43
PE-48x25x98 PE Block 48ID x 25mm Wall 98OD 682055 43
PE-51x25x106 PE Block 51ID x 25mm Wall 106OD 682056 43
PE-54x25x105 PE Block 54ID x 25mm Wall 105OD 682057 43
PE-57x25x108 PE Block 57ID x 25mm Wall 108OD 682058 43
PE-60x25x111 PE Block 60ID x 25mm Wall 111OD 682059 43
PE-64x25x118 PE Block 64ID x 25mm Wall 118OD 682060 43
PE-67x25x117 PE Block 67ID x 25mm Wall 117OD 682061 43
PE-73x25x123 PE Block 73ID x 25mm Wall 123OD 682062 43
PE-76x25x131 PE Block 76ID x 25mm Wall 131OD 682063 43
PE-102x25x156 PE Block 102ID x 25mm Wall 156OD 682065 43
PE-10x38x86 PE Block 10ID x 38mm Wall 86OD 682101 43
PE-13x38x93 PE Block 13ID x 38mm Wall 93OD 682102 43
PE-16x38x92 PE Block 16ID x 38mm Wall 92OD 682103 43
PE-19x38x106 PE Block 19ID x 38mm Wall 106OD 682104 43
PE-25x38x106 PE Block 25ID x 38mm Wall 106OD 682105 43
PE-32x38x118 PE Block 32ID x 38mm Wall 118OD 682106 43
PE-38x38x118 PE Block 38ID x 38mm Wall 118OD 682107 43
PE-52x38x131 PE Block 51ID x 38mm Wall 131OD 682108 43
PE-64x38x144 PE Block 64ID x 38mm Wall 144OD 682109 43
PE-76x38x156 PE Block 76ID x 38mm Wall 156OD 682110 43
PE-102x38x182 PE Block102ID x 38mm Wall 182OD 682111 43
PE-124x38x207 PE Block124ID x 38mm Wall 207OD 682112 43
PE-152x38x234 PE Block152ID x 38mm Wall 234OD 682113 43
PE-22x38x98 PE Block 22ID x 38mm Wall 98OD 682114 43
PE-28x38x104 PE Block 28ID x 38mm Wall 104OD 682115 43
PE-10x10x108 PE Block10ID x 50mm Wall 108OD 682201 43
PE-13x50x118 PE Block13ID x 50mm Wall 118OD 682202 43
PE-16x50x114 PE Block16ID x 50mm Wall 114OD 682203 45
PE-19x50x131 PE Block19ID x 50mm Wall 131OD 682204 45
PE-25x50x131 PE Block 25ID x 50mm Wall 131OD 682205 45
PE-32x50x144 PE Block 32ID x 50mm Wall 144OD 682206 45
PE-38x50x144 PE Block 38ID x 50mm Wall 144OD 682207 45
PE-51x50x156 PE Block 51ID x 50mm Wall 156OD 682208 45
PE-64x50x168 PE Block 64ID x 50mm Wall 168OD 682209 45
PE-76x50x182 PE Block 76ID x 50mm Wall 182OD 682210 45
PE-102x50x202 PE Block 102ID x 50mm Wall 202OD 682211 45
PE-127x50x232 PE Block 127ID x 50mm Wall 232OD 682212 45
PE-152x50x258 PE Block 152ID x 50mm Wall 258OD 682213 45
Part ID Description Binder Code
Page No.
PEC-13x35 PE Block & Clip ZP 13mm Wall 35OD 683000 47
PEC-13x38 PE Block & Clip ZP 13mm Wall 38OD 683001 47
PEC-13x42 PE Block & Clip ZP 13mm Wall 42OD 683002 47
PEC-13x44 PE Block & Clip ZP 13mm Wall 44OD 683003 47
PEC-13x48 PE Block & Clip ZP 13mm Wall 48OD 683004 47
PEC-13x51 PE Block & Clip ZP 13mm Wall 51OD 683005 47
PEC-13x54 PE Block & Clip ZP 13mm Wall 54OD 683006 47
PEC-13x75 PE Block & Clip ZP 13mm Wall 57OD 683007 47
PEC-13x60 PE Block & Clip ZP 13mm Wall 60OD 683008 47
PEC-13x64 PE Block & Clip ZP 13mm Wall 64OD 683009 47
PEC-13x67 PE Block & Clip ZP 13mm Wall 67OD 683010 47
PEC-13x70 PE Block & Clip ZP 13mm Wall 70OD 683011 47
PEC-13x73 PE Block & Clip ZP 13mm Wall 73OD 683012 47
PEC-13x76 PE Block & Clip ZP 13mm Wall 76OD 683013 47
PEC-13x79 PE Block & Clip ZP 13mm Wall 79OD 683014 47
PEC-13x83 PE Block & Clip ZP 13mm Wall 83OD 683015 47
PEC-13x86 PE Block & Clip ZP 13mm Wall 86OD 683016 47
PEC-13x90 PE Block & Clip ZP 13mm Wall 90OD 683017 47
PEC-13x92 PE Block & Clip ZP 13mm Wall 92OD 683018 47
PEC-13x98 PE Block & Clip ZP 13mm Wall 98OD 683019 47
PEC-13x102 PE Block & Clip ZP 13mm Wall 102OD 683020 47
PEC-19x48 PE Block & Clip ZP 19mm Wall 48OD 683100 47
PEC-19x51 PE Block & Clip ZP 19mm Wall 51OD 683101 47
PEC-19x54 PE Block & Clip ZP 19mm Wall 54OD 683102 47
PEC-19x54 PE Block & Clip ZP 19mm Wall 54OD 683103 47
PEC-19x60 PE Block & Clip ZP 19mm Wall 60OD 683104 47
PEC-19x64 PE Block & Clip ZP 19mm Wall 64OD 683105 47
PEC-19x67 PE Block & Clip ZP 19mm Wall 67OD 683106 47
PEC-19x70 PE Block & Clip ZP 19mm Wall 70OD 683107 47
PEC-19x73 PE Block & Clip ZP 19mm Wall 73OD 683108 47
PEC-19x76 PE Block & Clip ZP 19mm Wall 76OD 683109 47
PEC-19x79 PE Block & Clip ZP 19mm Wall 79OD 683110 47
PEC-19x83 PE Block & Clip ZP 19mm Wall 83OD 683111 47
PEC-19x86 PE Block & Clip ZP 19mm Wall 86OD 683112 47
PEC-19x90 PE Block & Clip ZP 19mm Wall 90OD 683113 47
PEC-19x92 PE Block & Clip ZP 19mm Wall 92OD 683114 47
PEC-19x95 PE Block & Clip ZP 19mm Wall 95OD 683115 47
PEC-19x98 PE Block & Clip ZP 19mm Wall 98OD 683116 47
PEC-19x102 PE Block & Clip ZP 19mm Wall 102OD 683117 47
PEC-19x105 PE Block & Clip ZP 19mm Wall 105OD 683118 47
PEC-19x111 PE Block & Clip ZP 19mm Wall 111OD 683119 47
PEC-19x114 PE Block & Clip ZP 19mm Wall 114OD 683120 47
PEC-25x60 PE Block & Clip ZP 25mm Wall 60OD 683200 47
PEC-25x64 PE Block & Clip ZP 25mm Wall 64OD 683201 47
PEC-25x67 PE Block & Clip ZP 25mm Wall 67OD 683202 47
PEC-25x70 PE Block & Clip ZP 25mm Wall 70OD 683203 47
PEC-25x73 PE Block & Clip ZP 25mm Wall 73OD 683204 47
PEC-25x76 PE Block & Clip ZP 25mm Wall 76OD 683205 47
PE Block & Clip
index
Kwik-Smart 85
Part ID Description Binder Code
Page No.
PG100 PG B100 0 to 100 691015 54
PG250 PG B100 0 to 250 691016 54
PG400 PG B100 0 to 400 KPA 691017 54
PG1000 PG B100 0 to 1000 KPA 691020 54
Part ID Description Binder Code
Page No.
ZPC10 KS228L Purlin Clip ZP 650003 33
CPC10 KS228N Purlin Clip ZP 650004 33
Purlin Clip
Pressure Gauge
S
T
W
Part ID Description Binder Code
Page No.
SN06 M6 Slick Strut Nut ZP 647000 31
SN08 M8 Slick Strut Nut ZP 647001 31
SN10 M10 Slick Strut Nut ZP 647002 31
SN12 M12 Slick Strut Nut ZP 647003 31
Part ID Description Binder Code
Page No.
SW06 M6 Spring Washer 31
SW08 M8 Spring Washer 31
SW10 M10 Spring Washer 31
SW12 M12 Spring Washer 31
SW16 M16Spring Washer 31
Part ID Description Binder Code
Page No.
TTP 1/4 BSP Twinlok Test Plug Brass 691000 54
TTP 1/4 NTP Twinlok Test Plug Brass 691001 54
PTP 1/4 BSP Pete’s Test Plug Brass 691002 54
PTP 1/4 NTP Pete’s Test Plug Brass 691003 54
Slick Strut Nut
Part ID Description Binder Code
Page No.
CU 25CU Stand Off Clip PC 660002
KS110-40PVC 40PVC Stand Off Clip PC 660010
KS110-50PVC 50PVC Stand Off Clip PC 660011
KS110-65PVC 65PVC Stand Off Clip PC 660012
KS110-80PVC 80PVC Stand Off Clip PC 660013
KS110-100PVC 100PVC Stand Off Clip PC 660014
KS110-150PVC 150PVC Stand Off Clip PC 660015
Stand Off Clip
Spring Washers
Part ID Description Binder Code
Page No.
KS111-50CU 50CU Tail Clip PC 661005
KS111-80CU 80CU Tail Clip PC 661007
KS111-100CU 100CU Tail Clip PC 661008
KS111-40PVC 40PVC Tail Clip PC 661010
KS111-80PVC 50PVC Tail Clip PC 661011
KS111-80PVC 80PVC Tail Clip PC 661013
KS111-100PVC 100PVC Tail Clip PC 661014
KS111-150PVC 150PVC Tail Clip PC 661015
Tail Clip
Test Plug
Part ID Description Binder Code
Page No.
TR06-H Threaded Rod M06 R/H HDG Gr.4.6 33
TR08-H Threaded Rod M08 R/H HDG Gr.4.6 904020 33
TR10-H Threaded Rod M10 R/H HDG Gr. 4.6 904021 33
TR12-H Threaded Rod M12 R/H HDG Gr. 4.6 904022 33
TR16-H Threaded Rod M16 R/H HDG Gr.4.6 904023 33
TR06-H Threaded Rod M06 R/H SS Gr.316 33
TR08-SS Threaded Rod M08 R/H SS Gr.316 904036 33
TR10-SS Threaded Rod M10 R/H SS Gr.316 904037 33
TR12-SS Threaded Rod M12 R/H SS Gr.316 904038 33
TR16-SS Threaded Rod M16 R/H SS Gr.316 904039 33
TR06 Threaded Rod M06 R/H ZINC Gr.4.6 904199 33
TR08 Threaded Rod M08 R/H ZINC Gr.4.6 904200 33
TR10 Threaded Rod M10 R/H ZINC Gr.4.6 904201 33
TR12 Threaded Rod M12 R/H ZINC Gr.4.6 904202 33
TR16 Threaded Rod M16 R/H ZINC Gr.4.6 904203 33
Threaded Rod
Part ID Description Binder Code
Page No.
TK-150 150mm UltraStrut Trapeze Kit GB 31
TK-300 300mm UltraStrut Trapeze Kit GB 686000 31
TK-450 450mm UltraStrut Trapeze Kit GB 31
TK-600 600mm UltraStrut Trapeze Kit GB 31
TK-750 750mm UltraStrut Trapeze Kit GB 686001 31
TK-1100 1100mm UltraStrut Trapeze Kit GB 686002 31
Part ID Description Binder Code
Page No.
FWP10 KS25 M10 Female Wall Plate ZP 650000 33
VWP10 KS28 M10 Vertical Wall Plate ZP 650001 33
WP10 KS30 M10 Male Wall Plate ZP 650002 33
FWP12 KS25 M12 Female Wall Plate ZP 650005 33
VWP12 KS28 M12 Vertical Wall Plate ZP 650006 33
SE10 KS32 M10 Suspension Eye ZP 650008 33
HWP10 KS29 M10 Horizintal Wall Plate ZP 650009 33
HWP12 KS29 M12 Horizintal Wall Plate ZP 650010 33
Trapeze Kit
Wall Plates
PEC-25x79 PE Block & Clip ZP 25mm Wall 79OD 683206 47
PEC-25x83 PE Block & Clip ZP 25mm Wall 83OD 683207 47
PEC-25x86 PE Block & Clip ZP 25mm Wall 86OD 683208 47
PEC-25x90 PE Block & Clip ZP 25mm Wall 90OD 683209 47
PEC-25x92 PE Block & Clip ZP 25mm Wall 92OD 683210 47
PEC-25x95 PE Block & Clip ZP 25mm Wall 95OD 683211 47
PEC-25x98 PE Block & Clip ZP 25mm Wall 98OD 683212 47
PEC-25x102 PE Block & Clip ZP 25mm Wall 102OD 683213 47
PEC-25x105 PE Block & Clip ZP 25mm Wall 105OD 683214 47
PEC-25x108 PE Block & Clip ZP 25mm Wall 108OD 683215 47
PEC-25x111 PE Block & Clip ZP 25mm Wall 111OD 683216 47
PEC-25x114 PE Block & Clip ZP 25mm Wall 114OD 683217 47
PEC-25x117 PE Block & Clip ZP 25mm Wall 117OD 683218 47
PEC-25x123 PE Block & Clip ZP 25mm Wall 123OD 683219 47
PEC-25x127 PE Block & Clip ZP 25mm Wall 127OD 683220 47
Index
86
Y
Part ID Description Binder Code
Page No.
YC15-P8 15PVC Pressure Yoke Clamp PC White 662000 39
YC25-P8 25PVC Pressure Yoke Clamp PC White 662001 39
YC32-P8 32PVC Pressure Yoke Clamp PC White 662002 39
YC50-P8 50PVC Pressure Yoke Clamp PC White 662003 39
YC80-P8 80PVC Pressure Yoke Clamp PC White 662004 39
YC100-P8 100PVC Pressure Yoke Clamp PC White 662005 39
YC20-C 20Cu Yoke Clamp Powder Coated Brown 663000 39
YC25-C 25Cu Yoke Clamp Powder Coated Brown 663001 39
YC32-C 32Cu Yoke Clamp Powder Coated Brown 663002 39
YC40-C 40Cu Yoke Clamp Powder Coated Brown 663003 39
YC50-C 50Cu Yoke Clamp Powder Coated Brown 663004 39
YC65-C 65Cu Yoke Clamp Powder Coated Brown 663005 39
YC80-C 80Cu Yoke Clamp Powder Coated Brown 663006 39
YC100-C 100Cu Yoke Clamp Powder Coated Brown 663007 39
YC125-C 125Cu Yoke Clamp Powder Coated Brown 663008 39
YC150-C 150Cu Yoke Clamp Powder Coated Brown 663009 39
YC200-C 200Cu Yoke Clamp Powder Coated Brown 663010 39
YC40-P 40PVC Yoke Clamp Powder Coated White 664000 39
YC50-P 50PVC Yoke Clamp Powder Coated White 664001 39
YC65-P 65PVC Yoke Clamp Powder Coated White 664002 39
YC80-P 80PVC Yoke Clamp Powder Coated White 664003 39
YC100-P 100PVC Yoke Clamp Powder Coated White 664004 39
YC100-P 150PVC Yoke Clamp Powder Coated White 664005 39
YC125-P 225PVC Yoke Clamp Powder Coated White 664006 39
YC300-P 300PVC Yoke Clamp Powder Coated White 664007 39
Yoke Clamp
Part ID Description Binder Code
Page No.
WDG08 M08 Wedge Nut ZP 648000 31
WDG10 M10 Wedge Nut ZP 648001 31
WDG12 M12 Wedge Nut ZP 648002 31
Wedge Nut
KWIK-SMART METAL FRAMING| PIPE SUPPORTS| TEST PLUGS| HARDWARE
| CABLE MANAGEMENT
BUILDING SERVICES SOLUTIONS
CAT
ALOGUE
Head Office:Binder Group PTY LTD (Western Australia)26 Miles RoadKewdale WA 6105Phone: +61 (0) 8 9353 2208Fax: +61 (0) 8 9353 2751Email: [email protected]
Binder Group PTY LTD (Victoria) 12 Wedgewood RdHallam VIC 3803Phone: +61 (0) 3 9702 4360Fax: +61 (0) 3 9796 5049Email: [email protected]
Binder Group PTY LTD (Queensland)2/11-13 Allan StreetLoganholme QLD 4129Phone: +61 (0) 7 3421 0222Fax: +61 (0) 7 3421 0299Email: [email protected]
A K E E S A F E T Y P R O D U C T