Embed Size (px)
Citation preview
Končar – Power
Transformers Ltd.
Joint Venture of Siemens and Končar
Page 2 May, 2018 Končar – Power Transformers Ltd.
Zagreb
Croatia
KPT
Manufacturing Places Siemens Transformers
May, 2018 Page 3 Končar – Power Transformers Ltd.
Siemens Transformers
Merged strengths - our history
May, 2018 Page 4 Končar – Power Transformers Ltd.
1921
1946
1991
1995
Production and repair of
rotating machines and
transformers
First assinchrone machine
with the winding from
enamel copper wire
1947 – 1960
Transformers voltage
class up to 123kV
From 1962
Transformers voltage
class up to 245kV
1965
New factory production
capacity 3500 MVA/y
From 1970
Transformers voltage clas up
to 420 kV, ratings up to 750MVA
1991
Independent Končar Power
Transformers Ltd. (KPT)
1995
Joint Venture of Siemens and
Končar
Certificates ISO 9001, ISO
14001, OHSAS 18001, ISO/IEC
27001:2005
Transformers voltage class up
to 550 kV, ratings up to 1000
MVA
HVDC transformers
SVC transformers
2007
New Test Laboratory
KPT Company History
May, 2018 Page 5 Končar – Power Transformers Ltd.
Generator
transformers
Up to 1000 MVA
Up to 550 kV
Furnace and rectifier
For railways
Large transmission
transformers and
autotransformers
Up to 1000 MVA
Up to 550 kV Up to 550 kV
Customer support
Diagnostic and
maintenance
HVDC
transformers
Special
transformers
Transformer life
management
Manufacturing Program
Page 6 May, 2018 Končar – Power Transformers Ltd.
Highest operation voltage
(kV) Units Total power (MVA) Export (MVA)
72,5 528 17.414,90 17.453,90
123 891 33.947,18 12.333,03
170 402 28.495,25 28.495,25
245 479 79.203,23 66.082,23
420 566 150.270,90 128.911,50
550 69 16.347,32 16.344,32
Total 2.935 325.678,78 269.088,28
Average transformer power / year: 110,96 MVA
Rated power (average) 2008 – 2017 176,14 MVA
Rated power (average) 2016 – 2017 180,89 MVA
Export 2008 – 2017 97,86%
Total export 1949 – 2017 82,62%
Production 1949 – 10/2017
Page 7 May, 2018 Končar – Power Transformers Ltd.
Total of 88 countries
Export in 2008 – 2017 = 97.86%
Export
May, 2018 Page 8 Končar – Power Transformers Ltd.
Production facility
Today:
Total Area: 48.467 m²
Under the roof: 25.125 m²
Page 9 May, 2018 Končar – Power Transformers Ltd.
Total working area: 1632m²
Air conditioned
Cuttting to the lenght, core
sheet up to 1000 mm width
Cutting capacity: 5500 t/y
Core-Sheet Cutting & Stacking Area
Page 10 May, 2018 Končar – Power Transformers Ltd.
Total working area:
1800 m²
Winding machines:
Vertical: 4 units
Horizontal: 7 units
Overpressure controlled
Air conditioned
Winding Workshop
Page 11 May, 2018 Končar – Power Transformers Ltd.
Total area of 4661 m²
Air conditioned
Main equipment:
Crane – capacity 150 t, 3 units
Crane – capacity 400 t, 1 unit
Other cranes: 3 – 32 t, 7 units
Movable scafold 5 units
Vapour phase drying chamber – 2 units
Air cushions, capacity up to 500 t
Assembly Workshop
Page 12 May, 2018 Končar – Power Transformers Ltd.
Preparation of active part before tanking
Performed in controlled environment:
Humidity below 10%
Temperature 20 – 30 ˚C
Desert Climate
Page 13 May, 2018 Končar – Power Transformers Ltd.
The building is 100% Electrostatically
(Faraday cage) & noise shielded
Test Laboratory
Testing area
1050 m²
Page 14 May, 2018 Končar – Power Transformers Ltd.
Dimensions of testing area:
Surface 30m × 35m
Height 25m
Test Laboratory
Page 15 May, 2018 Končar – Power Transformers Ltd.
ISO
90
01
:200
8
ISO
14
00
1:2
004
BS
OH
SA
S 1
80
01
:2007
ISO/IEC 27001:2013
Integrated Management System
Page 16 May, 2018 Končar – Power Transformers Ltd.
Transport
Page 17 May, 2018 Končar – Power Transformers Ltd.
On time delivery!
Transport
