D65EX-12D65EX-12 LT D65PX-12

FLYWHEEL HORSEPOWER142 kW 190 HP @ 1950 rpm

OPERATING WEIGHTD65EX-12: 18575 kg 40,960 lbD65EX-12 LT: 19310 kg 42,475 lbD65PX-12: 19615 kg 43,250 lb

CR

AWL

ER

DO

ZE

RD65EX/PX-12

2

Hydrostatic Steering System (HSS) provides smooth, quick, and powerful control in

varying ground conditions.

Left hand joystick controls all tractor motion.

Hexagonal, low noise cab with viscous mounts provides

unsurpassed operator comfort and visibility.

Wet, multiple-disc brakes eliminate brake-band adjustments for

maintenance-free operation.

Blade tilt lines completely protected.

Modular power train for increased serviceability and durability.

Forward mountedpivot shafts

isolate final drives from blade loads.

D65EX-12, D65EX-12 LT, D65PX-12 Crawler Dozer

WALK-AROUNDWALK-AROUND

Forward mountedpivot shafts

isolate final drives from blade loads.

Modular power train for increased serviceability and durability. Blade tilt lines

completely protected.

Gull-wing engine side doors for easy and safer servicing.

Electronic Monitoring System preventsminor problems from developing into major ones.

The S6D125E-2 turbocharged diesel engine

provides an output of 142 kW 190 HP, with excellent productivity, while meeting

current emissions standards.

3

Standard length (D65EX-12), long track (D65EX-12 LT), and

low ground pressure (D65PX-12) versions available. Low drive design provides

outstanding stability and gradability.

FLYWHEEL HORSEPOWER142 kW 190 HP @ 1950 rpm

OPERATING WEIGHTD65EX-12: 18575 kg 40,960 lb

D65EX-12 LT: 19310 kg 42,475 lbD65PX-12: 19615 kg 43,250 lb

BLADE CAPACITYD65EX-12 (ANGLE-DOZER):

3.55 m3 4.64 yd3

D65EX-12 (STRAIGHT-TILTDOZER):3.89 m3 5.09 yd3

D65EX-12 (SEMI-U TILTDOZER):5.61 m3 7.34 yd3

D65EX-12 LT (SEMI-U TILTDOZER):5.61 m3 7.34 yd3

D65PX-12 (STRAIGHT-TILTDOZER):3.69 m3 4.83 yd3

D65EX/PXCRAWLER DOZER

High capacity dozer blades combined with highest power

in class provide outstanding productivity.

High capacity dozer blades combined with highest power

in class provide outstanding productivity.

Standard length (D65EX-12), long track (D65EX-12 LT), and

low ground pressure (D65PX-12) versions available. Low drive design provides

outstanding stability and gradability.

4

OPERATOR’SCOMPARTMENT

OPERATOR’SCOMPARTMENT

Steeringmotor

SteeringmotorCylinder

Cylinder

PPC PPC

Servo valve Servo valve

Workequipment

All steering, direction, and speed changes are made by a left-hand single joystick control. If the operator wants to

move the machine forward and to the left, he simply moves the joystick forward and to the left. If he desires a gear change,

he merely twists his wrist. The machine responds to the movement of the lever providing the operator with the feeling of

natural control with Komatsu’s joystick.

Low-Noise Design

For smoother riding comfort, power train components and

hydraulic control valves are mounted to the frame with

rubber pads to soften vibration and shut out noise. And,

because these models employ joysticks, the walk-through

operator compartment is uncluttered for smooth entry and

exit. A suspension seat with backrest is standard equipment.

Hexagonal Pressurized Cab (Optional)

This is another added comfort feature. Air filters and a higher

internal air pressure combine to prevent external dust from

entering the cab. In addition, the cab’s hexagonal design

provides excellent front, sides, and rear visibility. Viscous

damper cab suspension softens shocks for operator comfort

and extends component life.

Easy-to-Operate Work Equipment Control Lever

● A PPC valve is used with the right joystick blade control.

This improves operator comfort because of reduced

operating effort and stroke.

● With the Closed-Center Load Sensing (CLSS) hydraulic

system, blade lever stroke is directly proportional with

blade speed, regardless of the load and travel speed.

This results in superb, fine controllability.

Benefits of CLSS

● More precise and responsive operation due to

the pressure compensation valve.

● Reduced fuel consumption by discharging only

the required amount of oil from the pump.

● The work equipment moves smoothly for operations such

as side-cutting even when priority is given to steering.

ElectronicMonitoringSystemAn electronic monitoring system prevents minor problems from developing into major ones. All meters and gauges are controlled by amicrocomputer, which providesa wide indication range for aneasier, more precise reading.

● Charge Lamp

● Engine Oil Pressure Caution Lamp

● Engine Water Temperature Caution Lamp

● Engine Water Temperature Gauge

● Fuel Gauge

● Intake Air Heater Lamp

● Monitor Caution Cancel Switch

● Monitor Caution Lamp

● Service Meter

● Transmission Oil Temperature Caution Lamp

● Transmission Oil Temperature Gauge

5

D65EX/PXCRAWLER DOZER

Hydrostatic Steering System—Smooth, Powerful TurningThe Hydraulic Steering System (HSS) distributes power to both tracks without power

interruption on the inside track. When the machine turns the outside track moves faster and

the inside slower, for smooth, powerful turns. The left and right tracks can be counter-rotated

for a minimum turning radius providing excellent maneuverability. Shock-free steering reduces

machine vibration and minimizes operator fatigue.

Steering Functions

Forward and

reverse

Right and left

steering

First, to second,

to third shiftingLeft Hand Right Hand

Blade Functions

Lifting and

lowering

Tilting

Ripper Functions(Optional)

Raise and

lower

LeftSprocket

RightSprocket

Wet Disc Brakes

Bevel Gear

SteeringMotor

● Turning while dozing—the machine turns by driving the left and right tracks

under power at different speeds allowing the machine to travel at the same

speed as in straight dozing.

● Side-cutting—when side-loading the blade, straight travel can be maintained

utilizing HSS.

● On downhill slopes—the machine doesn’t require cross steering. The joystick

provides the same steering response on downhill slopes as on flat ground.

● Grading—can be done efficiently without damaging the ground, because the

inside track is not locked during turning.

● Counter-rotates for exceptional maneuverability.

6

UndercarriageLow Drive and Long TrackUndercarriage

It is extraordinarily tough and offers

excellent grading ability and stability. Large-

diameter bushings, increased track link

heights, and improved oil-seals help to

increase undercarriage durability.

Addition of Long Track Version (EX Series)

The long track version (the same length

of track on ground with PX models) has

been added to D65EX to increase

operational stability.

Improvements

Numerous improvements to increase

undercarriage reliability and durability have

been incorporated. Serviceability has also

been improved with the addition of remote

greasing of equalizer bar center pin.

UNDERCARRIAGEAND FRAME

UNDERCARRIAGEAND FRAME

7

D65EX/PXCRAWLER DOZER

FrameFlat Bottom Frame

A flat bottom frame, the monocoque track frames and

forward-mounted pivot shafts provide good maneuverability

in muddy terrain by preventing mud from building up under

the frame.

Modular Designed Power Train Units

The modular design allow easy removal and installation

of any individual unit for shorter downtime.

Wet, Multiple-Disc Brakes

Eliminate brake-band adjustments for

maintenance-free operation.

Durability

Because fewer components mean greater reliability, we’ve designed a simple hull frame

made of a thick, single plate. Track frames have a large-section construction for maximum

rigidity. Even the box-section construction of the blade back beam is reinforced, all with

durability in mind.

Test Ports

Oil pressure test ports for the power train are centralized on the right hand side of the

operator platform for easy access.

A radiator coolant reservoir makes it easier to check the coolant level and eliminatesfrequent refilling.

Powerful Engine

A powerful S6D125E-2 turbocharged diesel engine

provides a massive output of 142 kW 190 HP. The

engine power is transmitted smoothly to the final

drives via a high-efficiency torque converter. And

this engine also meets current emissions standards,

without sacrificing power or machine productivity.

Gull-Wing Engine Side Covers

With a gas-spring cylinder that opens widely, the engine

and the auxiliary components can be checked easily.

Komatsu S6D125E-2 Turbocharged Diesel Engine

8

ENGINE ANDTORQUE CONVERTER

ENGINE ANDTORQUE CONVERTER

9

D65EX/PXCRAWLER DOZER

STEERING

Single-lever controls for all directional movements. Simply tilt thelever to the left to make a left turn. Tilt it to the right to make a rightturn. Pushing the lever forward results in forward motion; pullingtoward the operator reverses the machine. Hydrostatic steeringsystem (HSS) of differential planetary gear type. Powered byhydraulic motor, hydraulically actuated, and hand-operated.

Minimum turning radius:D65EX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3"D65EX-12 LT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.2 m 7'3"D65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.7 m 8'10"

Brakes . . . . . . . . . . . Wet, multiple-disc, spring-applied, hydraulically released, foot pedal and safety lever operated

ENGINE

Model. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Komatsu S6D125E-2Type . . . . . . . . . . . . . . . . 4-stroke cycle, water-cooled, emissionized,

turbocharged diesel engineNo. of cylinders. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6Bore . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125 mm 4.92"Stroke. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 mm 5.91"Piston displacement . . . . . . . . . . . . . . . . . . . . . . . . . 11.04 ltr 674 in3

Gross horsepower*. . . . . . . . . . . . . . . . . . 153 kW 205 HP/1950 rpmNet flywheel horsepower** . . . . . . . . . . . . 142 kW 190 HP/1950 rpmNet maximum torque . . . . . . . . . . . . . . 100 kg m 723 ft lb/1200 rpm

Direct-injection fuel system. All-speed mechanical governor. Forced lubrication driven by gear pump. Full-flow for lube purifi-cation. Dry-type air cleaner with automatic dust evacuator and dust indicator. 11 kW/24 V electrical starter motor. 35 /24 Valternator. 140 Ah/2 x 12 V batteries.

* Gross horsepower output for complete engine operating under SAE J1995 conditions.

** Net flywheel horsepower output for standard engine (SAE J1349) including air cleaner, alternator (not charging), water pump, lubricating oil pump, fuel pump, muffler, and fan.

TORQFLOW TRANSMISSION

Komatsu’s TORQFLOW transmission consists of a wet, spring-friction damper, a water-cooled, 3-element, 1-stage, 1-phase torqueconverter and a planetary gear, multiple-disc clutch transmissionwhich is hydraulically actuated and force-lubricated for optimum heat dissipation. It offers a single-lever control for the 3 speeds and for directional and steering changes. Gearshift lock lever andneutral safety switch prevent machine from accidental starts.

FINAL DRIVE

Double-reduction final drives of spur and planetary gears to minimizetransmission of shocks to power train components. Segmentedsprocket rims are bolt-on for easy in-the-field replacement.

UNDERCARRIAGE

Suspension. . . . . . . . . . . . . . . . . . . . . . . . . Oscillation, equalizer barTrack roller frame . . . . . . . . . . . . . Monocoque, high-tensile-strength

steel constructionRollers and idlers . . . . . . . . . . . . . Lubricated carrier/track rollers and

idlers are sealed with floating sealsNumber of track rollers (each side) . . . . . . . . . . . . . . . 7 (D65EX-12)

8 (D65PX-12)8 (D65EX-12 LT)

Number of carrier rollers (each side) . . . . . . . . . . . . . . . . . . . . . . . . 2Track shoes . . . . . . . . . . . . Lubricated tracks. Single-grouser shoes.

Unique dust seals for preventing entry of foreign abrasives into pin-to-bushing clearances for extended service.

Track tension is easily adjusted with a grease gun.

COOLANT AND LUBRICANT

CAPACITY (REFILLING)

Coolant . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 ltr 13.2. U.S. galFuel tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . 410 ltr 108 U.S. galEngine oil. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38 ltr 10.0 U.S. galDamper. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.4 ltr 0.6 U.S. galTorque converter, transmission,

bevel gear and steering system . . . . . . . . . . 50 ltr 13.2 U.S. galFinal drive (each side): D65EX-12 and LT . . . . 24 ltr 6.3 U.S. gal

D65PX-12 . . . . . . . . . . 27 ltr 7.1 U.S. galBlade hydraulic oil capacity . . . . . . . . . . . . . . . 55 ltr 14.5 U.S. gal

OPERATING WEIGHT (APPROXIMATE)

Tractor weight:Including rated capacity of lubricant, coolant, ROPS, full fuel tank,operator, and standard equipment.D65EX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15340 kg 33,820 lbD65EX-12 LT . . . . . . . . . . . . . . . . . . . . . . . . . . . 15530 kg 34,240 lbD65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16670 kg 36,750 lb

Operating weight:Including dozer, operator, ROPS, steel cab, standard equipment,rated capacity of lubricant, coolant, and full fuel tank.D65EX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18575 kg 40,960 lbD65EX-12 LT . . . . . . . . . . . . . . . . . . . . . . . . . . . 19310 kg 42,475 lbD65PX-12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19615 kg 43,250 lb

Travel speed Forward Reverse1st 0-3.9 km/h 0-2.4 mph 0-5.0 km/h 0-3.1 mph2nd 0-6.8 km/h 0-4.2 mph 0-8.6 km/h 0-5.3 mph3rd 0-10.6 km/h 0-6.6 mph 0-13.4 km/h 0-8.3 mph

D65EX-12 D65EX-12 LT D65PX-12No. of shoes(each side) 39 45 45Grouser 65 mm 65 mm 65 mmheight 2.6" 2.6" 2.6"Shoe width 510 mm 510 mm 915 mm(standard) 20.1" 20.1" 36.0"Ground 27285 cm2 33505 cm2 59923 cm2

contact area 4,230 in2 5,193 in2 9,288 in2

Ground pres- 0.68 kg/cm2 0.57 kg/cm2 0.33 kg/cm2

sure operating 9.68 psi 8.20 psi 4.66 psi

SPECIFICATIONSSPECIFICATIONS

0

0 2 4 6 8 MPH

Km/h2 4 6 8 10 12 140

30

60

200

100

40

20

00

x103kgx103lb

20

10

DR

AW

BA

R P

ULL

TRAVEL SPEED

1F

2F

3F

D65EX-12Power ShiftDRAWBAR PULL VS. SPEED.

MAXIMUM USABLE PULL DEPENDS ONTRACTION AND WEIGHT OF TRACTORINCLUDING MOUNTED EQUIPMENT.

10

Overall Maximum Maximum Maximum Additional weightlength with *Blade Blade lift above drop below tilt Dozer Hydraulic Additional

Blades dozer capacity length x height ground ground adjustment equipment control unit weight

Semi-U 5390 mm 5.61 m3 3460 mm x 1425 mm 1095 mm 450 mm 880 mm 2310 kg 720 kg 0.11 kg/cm2

tilt dozer 17'8" 7.34 yd3 11'4" x 4'8" 3'7" 1'6" 2'11" 5,090 lb 1,590 lb 1.56 psi

Straight 5260 mm 3.89 m3 3415 mm x 1225 mm 1100 mm 450 mm 870 mm 2000 kg 720 kg 0.10 kg/cm2

tilt dozer 17'3" 5.09 yd3 11'2" x 4'1" 3'7" 1'6" 2'10" 4,410 lb 1,590 lb 1.42 psiAngle 5470 mm 3.55 m3 3970 mm x 1100 mm 1180 mm 460 mm 400 mm 2280 kg 650 kg 0.11 kg/cm2

dozer 17'11" 4.64 yd3 13'0" x 3'7" 3'10" 1'6" 1'4" 5,030 lb 1,430 lb 1.56 psiStraight 5550 mm 3.69 m3 3970 mm x 1100 mm 1200 mm 445 mm 890 mm 2030 kg 710 kg 0.04 kg/cm2

tilt dozer 18'3" 4.83 yd3 13'0" x 3'7" 3'11" 1'6" 2'11" 4,480 lb 1,570 lb 0.57 psiPower 5550 mm 3.69 m3 3970 mm x 1100 mm 1200 mm 445 mm 890 mm 2040 kg 710 kg 0.05 kg/cm2

tilt pitch 18'3" 4.83 yd3 13'0" x 3'7" 3'11" 1'6" 2'11" 4,500 lb 1,570 lb 0.71 psiAngle 5766 mm 3.30 m3 4475 mm x 960 mm 1230 mm 490 mm 440 mm 1995 kg 650 kg 0.04 kg/cm2

dozer 18'11" 4.32 yd3 14'8" x 3'2" 4' 1'7" 1'5" 4,390 lb 1,430 lb 0.55 psi

Number of cylinders BoreBlade Lift 2 95 mm 3.74"Blade Tilt 1 140 mm 5.51"Ripper Lift 1 140 mm 5.51"

A 1495 mm 4'11"B* 1880 mm 6'2"C** 2050 mm 6'9"D* 2390 mm 7'10"E** 2972 mm 9'9"F 510 mm 20.1"G** 915 mm 36.0"H 2980 mm 9'9"I* 3025 mm 9'11"J 1270 mm 4'2"K 2675 mm 8'9"L# 3285 mm 10'9"M 4365 mm 14'4"N 65 mm 2.6"O 3195 mm 10'5"

BLADE

HYDRAULIC SYSTEM

Closed-center load sensing system (CLSS) designed for precise and responsive control and for efficient simultaneous operation.

Hydraulic control unitAll spool control valves externally mounted beside the hydraulic tank.Variable-displacement hydraulic pump with capacity (discharge flow)of 210 ltr/min 55.5 U.S. gal/min at rated engine rpm.

Relief valve setting . . . . . . . . . . . . . . . . . . . . . 210 kg/cm2 2,990 psi

Control valvesSpool control valve for Semi-U tilt dozer and straight tilt dozer.

Positions:Blade lift. . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and floatBlade tilt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Right, hold, and left

Spool control valve for angle dozer.Positions:

Blade lift. . . . . . . . . . . . . . . . . . . . . . . Raise, hold, lower, and float

Additional control valve required for multi-shank ripper.Positions:

Ripper lift . . . . . . . . . . . . . . . . . . . . . . . . . . Raise, hold, and lower

Hydraulic cylinders . . . . . . . . . . . . . . . . . . . . Double-acting, piston

Use of high-tensile-strength steel in moldboard and box construction of the back plate for extended service. Blade tilt hose piping is mountedinside the dozer push arm to protect from damage.

*Blade capacities are based on SAE recommendation practice J1265.

DIMENSIONS

D65PX

FG**

B*

D*

C**

A J

G.L.

I*

H

O

N

E** M

K L#

Ground clearance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 400 m 1'4" *D65EX-12 and D65EX-12 LT **D65PX-12 #D65EX-12 LT and D65PX-12

D65P

XD6

5EX

D65E

X an

d D6

5 EX

LT

11

D65EX/PXCRAWLER DOZER

AdditionalGround ground

Additional contact pressure toModels Shoes weight area tractor

560 mm 22.0" +120 kg 29660 cm2 –0.04 kg/cm2

single-grouser +260 lb 4,644 in2 –0.57 psi610 mm 24.0" +230 kg 32635 cm2 –0.08 kg/cm2

single-grouser +510 lb 5,058 in2 –1.14 psi

D65EX LT 510 mm 20.1" +45 kg 33506 cm2—single-grouser +100 lb 5,193 in2

D65EX 660 mm 26.0" +350 kg 35310 cm2 –0.11 kg/cm2

single-grouser +770 lb 5,473 in2 –1.56 psi

D65PX 950 mm 37.4" +50 kg 62420 cm2 –0.01 kg/cm2

circular arc +110 lb 9,675 in2 –0.14 psi

STANDARD EQUIPMENT FOR BASE MACHINE

● Air cleaner, double element with pre-cleaner

● Alternator, 35 ampere● Automatic fuel de-aeration● Back-up alarm● Batteries 140 Ah/2 x 12V● Blower cooling fan● Decelerator● Electronic instrument monitor panel● Engine hood and side covers● Fenders

● HSS hydrostatic steering system● Hydraulics for tilt dozer● Lighting system (includes 2 front, 1 rear)● Locks, filler caps, and covers● Mono-lever steering with PPC● Muffler with curved exhaust pipe● Radiator guard door, hinged● Radiator reserve tank● Rear cover, strengthened● ROPS mounting brackets● Single grouser shoes with sealed

and lubricated link assembly

● Strengthened under guards, crankcase, and transmission

● Suspension seat with seat belt● Track roller guards, center section

D65PX-12● Track roller guards, end sections● Track shoe assembly,

510 mm 20.1" D65EX-12915 mm 36.0" D65PX-12

OPTIONAL EQUIPMENT

ROPS RIPPER

● AR track assembly (abrasion resistant links and bushings)

● Air conditioner with heater, defroster, pressurizer

● Cooling fan, reversible● Counterweight, additional

650 kg 1,430 lb● Drawbar, rigid (not for use

with counterweight)● Front pull hook● Heat resistant fuel hoses● Heater and defroster

● Intake pipe with pre-cleaner● Hydraulics for ripper (EX)● Hitch● Long track arrangement (for use

with Semi-U blade only)● Light working, rear additional● Lunch box holder● Mirror● Power tilt and pitch (PX)● Side screens● Sweeps and rear screen● Segmented, full length track roller guards● Radiator core protective grid

● Radiator guard door, flat, strengthened, hinged

● Sun visor● Suspension seat, reclining with

fabric material (cab only)● Tank guard group● Underguards, hinged● Vandalism protection cover for

instrument panel (for ROPS canopy)● Water separator● Track roller guards, end sections,

and center guiding guards (D65EX-12, D65EX-12 LT)

ROPs Canopy for Steel Cab*Meets ISO 3471, SAE J1040 APR88, and SAE J395a ROPSstandards, as well as ISO 3499 FOPS standards.

Additional weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 340 kg 750 lbRoof dimensions:

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1270 mm 4'2"Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1490 mm 4'11"Height from compartment floor . . . . . . . . . . . . . . . . 1700 mm 5'7"

Additional ground pressure:D65EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01 kg/cm2 0.14 psiD65PX . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.005 kg/cm2 0.07 psi

Steel CabAll-weather, enclosed pressurized cab, includes oil dampersuspension, left and right front and rear wipers, ashtray, cigarettelighter, floor mat, hot/cold box.

Additional weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 285 kg 630 lbRoof dimensions:

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1765 mm 5'9"Width . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1720 mm 5'8"Height from floor to ceiling . . . . . . . . . . . . . . . . . . . 1515 mm 5'2"

Additional ground pressure:D65EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01 kg/cm2 0.14 psiD65PX . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.005 kg/cm2 0.07 psi

*ROPS canopy must be ordered by all machines.

Multi-shank Ripper for D65EXHydraulically controlled parallelogram ripper with three shanks.

Additional weight (including hydraulic control unit) . . . . . . . . . . . . . 1680 kg 3,700 lb

Beam length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2170 mm 7'1"Maximum lift above ground. . . . . . . . . . . . . . . . . . . . . . 640 mm 2'1"Maximum digging depth . . . . . . . . . . . . . . . . . . . . . . . 595 mm 1'11"

Additional ground pressure:D65EX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.06 kg/cm2 0.85 psi

SHOES

D65EXand

D65EX LT

Komatsu America International Company440 N. Fairway Dr., Vernon Hills, IL 60061

AESS453-00 ©1998 Komatsu Printed in USA SN11(15M) 11/98 (EV-1)

www.KomatsuAmerica.com Materials and specifications are subject to change without noticeis a trademark of Komatsu Ltd. Japan

Count on Komatsu and yourlocal distributor for the supportyou deserve. Our successdepends on satisfying your needfor productive equipment andsupporting that equipment.That’s why we have one of thelargest and strongest heavy-equipment distributor organ-izations in North America. Theirpersonnel are not only trained to help you select the equipmentthat is best-matched for yourbusiness but to support that equipment.

Finance Through its finance company,

Komatsu can offer you a wide variety of financingalternatives designed to meetyour needs. Programs includemunicipal leases for governmentalagencies, conditional sales contracts,and leases with $1 purchase optionsfor customers interested in owning theirequipment. Ask your distributor aboutKomatsu leasing. We offer finance andoperating leases and the unique AdvantageLease which offers you predetermined pur-chase, return, and renewal options.

Parts Three computer-linked partsdistribution centers provide fast access

to anywhere in the U.S. and Canada. Mostparts are available overnight. Plus, Komatsudistributors keep a large assortment ofcommonly used parts in stock for immediate access.

Remanufacturedparts Save money and

still have the same warranty as newparts at a fraction of the cost withlike-new remanufactured parts.

Maintenance Take advan-tage of the experience we have

gained and ask your distributor about our factory-supported programs including:

regular scheduled maintenance, oil andwear analysis, diagnostic inspections, undercarriage inspections, training, special service tools, parts programs, and even a special software program to help your distributor keep track of and manage service-related data.

SUPPORTSUPPORT