Embed Size (px)
Citation preview
KLEENGUARD*
Protective Clothing
KLEENGUARD* Coveralls: Work in Safety. Work in Comfort.
Kimberly-Clark Professional is committed to delivering
solutions that help make workplaces safer, healthier, and
more productive, Solutions like KLEENGUARD* Coveralls,
which offers excellent protection while ensuring users
can work in comfort.
2
33
4
KLEENGUARD* Protective Clothing Product Selector
The selector is a guide only. It is the responsibility of the employer to make sure the Coverall is suitable for its intended use. We suggest that you always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the products or contact customer care at [email protected].
Activity Application A20+ A20 A40 A71
Abatement/remediation
Exposure to radioactive particles
Hazardous waste remediation
Lead abatement
Mould remediation
Agriculture
Animal waste
Fertilizer/pesticide application (dry/granular)
Pesticide application (liquid)
BiologicalEN 14126
Biohazard handling, aerosol & liquid
Bodily fluids inc. blood
Cleaning/maintenance
Light duty clean up/warehouse
Machine maintenance (vehicle/refinery)
Sewage
Industrial clean-up (general)
Tank cleaning & maintenance
General industry/ manufacturing
Electronics
Fibreglass/insulation installation
Food processing
Powder handling
Liquid chemical handling/transfer
Woodworking
Non-hazardousNon-hazardous aerosols & liquids
Non-hazardous solids
PaintingPaint spraying
Powder coating
Scientific Pharmaceuticals
Metal/weldingMetal particulate (chromium/beryllium)
Metal polishing
Page 8 9 11 12
All KLEENGUARD* Protective Clothing conforms to EN 340 recommendations for sizing. Use the chart to help you select the right size garment.
Body measurements (cm)
Size Height Chest
S 164-170 96-104
M 170-176 104-112
L 176-182 112-120
Body measurements (cm)
Size Height Chest
XL 182-188 120-128
XXL 188-194 128-136
XXXL 194-200 136-144
suggested alternative
5
6
Selecting the correct safety protective clothing product for your particular circumstances can be difficult.
The following information may be helpful:
• A71 is our chemical protective coverall certified Cat III Type 3 (Liquid tight), Type 4 (Spray tight)
and Type 5 (Particle protection). For up-to-date information please visit our website
www.kcprofessional.com/uk/chemicalprotection.(1)
• A20+ is certified Cat III Type 5 (Particle protection) and Type 6 (Limited splash protection).
• A40 is a film laminate product that provides high levels of protection to the front where the majority of
contamination is likely to occur.
• A20+ is an SMS product that provides good levels of comfort due to breathability of the protective base-sheet.
The selector is a guide only. It is the responsibility of the employer to make sure the protective clothing is suitable for its intended use. We suggest that you always check the latest version of KIMBERLY-CLARK PROFESSIONAL* product literature to get more information about the products.
Product Test Method A20+ A20 A40 A71
High levels of comfort
High Levels of Comfort
High Levels of Protection
Chemical Protection
Type 3 EN 14605:2005 Pass
Type 4 EN 14605:2005 Pass
Type 5 EN ISO 13982-1:2004 Pass Complies Pass Pass
Type 6 EN 13034:2005 Pass Complies Pass
Infective agents EN 14126:2003 (A) Pass
Surface Resistivity EN 1149-5:2008 Pass Pass Pass
Radioactive dust EN 1073-2:2002 Pass Complies Pass Pass
Fabric Tests
Abrasion resistance EN 530 Method 2 2 Complies 6 6
Flex cracking resistance ISO 7854 Method B 5 of 6 Visual Complies 4 2
Trapezoidal tear resistance ISO-9073-4 1/2* of 6 Complies 2 2
Tensile strength EN ISO 13934-1 1 Complies 1 1
Seam strength EN ISO 13935-2 3 Complies 3 3
Puncture resistance EN 863 2 Complies 2 2
Resistance to ignition EN13274.4 Method 3 EN1146: Pass Complies Pass Pass
EN 368
Repellency to liquids EN ISO 6530 (30% H2SO
4) 3 Complies 3
EN ISO 6530 (10% NaOH) 3 Complies 3
Resistance to penetration by liquids EN ISO 6530 (30% H2SO
4) 3 Complies 3
EN ISO 6530 (10% NaOH) 3 Complies 3
EN 374:3
Resistance to permeation EN 374:3 (30% H2SO
4) 6
EN 374:3 (10% NaOH) 6
Whole Garment Tests (Tests performed with taping at wrists, ankles & hood)
Resistance to penetration by liquids (spray test)
EN ISO 17941-4(modified)
Pass Complies Pass Pass
Determination of resistance of suits to penetration by aerosols and fine particles
EN ISO 13982-2 (Average total inward leakage)
Average10.9%
Complies 5.09% 4.13%
KLEENGUARD* Product selector
(1) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com
KLEENGUARD*InsightsLeading Consumer Products CompanyOur distributors told us that a leading consumer products company presented some unique challenges during the maintenance of their cleaning powder manufacturing facility.
We understand the build-up of residue on the production machinery requires maintenance crews to regularly dust everything off. The air can be thick with dislodged dust making visibility difficult and worker protection from airborne particles of paramount importance. The maintenance crew need to be able to get into awkward areas and complete the work in a hot and humid environment.
We were told that their existing laminated coverall had been selected to provide worker protection at the lightest weight availability. The perception was that lightweight would be comfortable to wear.
What was discovered when our distributor partner spoke to the maintenance team was that the existing coveralls and high humidity did not combine well. The workers were so sweaty that they were changing their coverall a number of times throughout their shift. Changing required leaving their workstation or cleaning area, proceeding to another area to re-suit up, put their protective equipment back on and return to their task.
We were told that the workers appreciated the task and environment made work conditions difficult but heat stress and fatigue did impact worker health and safety. The impact on workplace efficiency and worker health and safety provided the impetus for safety review.
The KLEENGUARD* A20 coverall was recommended and trialled by the maintenance crew. The product provided fit for purpose worker protection and increased worker comfort through fabric breathability.
Flexible and comfortable, the KleenGuard* Coveralls enable dust and heat to coexist. The durability and wearability significantly improve worker satisfaction and minimise the need for mid-shift overall change.
7
88
Protection against dust, particles & light spray
KLEENGUARD* A20Breathable Particle and Water-Based Liquid Spray Protection Coverall
Description Size/Code M L XL XXL XXXL Colour Case Contents
A20 Coverall 6411 6412 6413 6414 6415 Orange 20 ×
A20 Coverall 6421 6422 6423 6424 6425 White 20 ×
A20 Coverall 6431 6432 6433 6434 6435 Blue 20 ×
High Performance SMS Fabric Outer layer – cloth-like, yet strong and abrasion-resistant spunbond polypropylene. Middle layer – an intricate web of microfibres that filters out many water-based liquids and dry particulates.
Breathable fabric reduces the risk of heat stress
To provide high strength seams with barrier properties serged seams are used with triple overlock stitching
Specially designed body, hood and waist for comfort and safety
Silicone free for critical areas
Single-use protective coverall complaint with Type 5/6 EN standards
Our Solution• Suitable for protection against
particles, fibres and light sprays of water-based liquids.
Areas of Use• Handling powders• General maintenance• Construction• Contract cleaning
9
Protection against dust, particles & light spray
High Performance SMS Fabric Outer layer – cloth-like, yet strong and abrasion-resistant spunbond polypropylene. Middle layer – an intricate web of microfibres that filters out many water-based liquids and dry particulates.
KLEENGUARD* A20+ Breathable Particle Protection Coverall
Description Size/Code S M L XL XXL XXXL Colour Case Contents PPE Classification Type
A20+ Coverall 95150 95160 95170 95180 95190 95200 White 25 × CAT III 5 & 6
A20
A70
A80
A45
A40
A50
A10
A 71
A 20+
CE0120 EN 1149-1:1995Antistatic
EN ISO 13982- 1:2004
Type 5-BParticle protection
EN 14126:2003Infective agents
protection
EN 13034:2005Type 6
Limited splash protection
UPGRADED - new design for better fit. Thumb loops prevent sleeves from riding up and provide increased wrist protection
Triple-stitched internal seams protect against tearing
Specially designed body, hood and waist for comfort and safety
Antistatic EN1149-1 for critical areas
Durable SMS fabric keeps out 99% of particles larger than 1 micron (I.O.M Aloxite test)
Breathable fabric reduces the risk of heat stress
Silicone-free for critical areas
EN 1073-2 approved for radioactive dust protection1
Reduced packaging reduces waste. Small, compact size is idealfor vending machines
Our Solution• Provides protection against particles,
fibres and chemical splash
Areas of Use• Handling powders• General maintenance• Construction• Contract cleaning
9
(1) Provides no protection against radioactive radiation
KLEENGUARD*InsightsLeading Marine Engineering CompanyWe were told a leading marine engineering company has rediscovered the business benefits of KLEENGUARD* quality and product performance.
Our distributor advised that although a long term buyer of KLEENGUARD* coveralls, unforeseen changes in their business circumstances was the catalyst for procurement substituting a lower cost overall.
We understand this is hot and dusty work. The sanding of fibreglass requires workers to be protected from airborne particles and dust and personal protection equipment including gloves, eye wear and overalls are critical.
Over the course of a day the manufacturing team need a full range of movement, they bend and stretch, as they work access to target areas can be awkward. The overall needs to move with the worker. It needs to be flexible and comfortable to wear.
With the need to reach and stretch to complete tasks came the ripping of seams. The incumbent overall were regularly replaced during a shift requiring the worker to leave their station, walk 5 minutes back to the store, remove the damaged overall and protective equipment, request another overall, re-suit up, walk 5 minutes back and start again. This resulted in wasted production time for the company and frustration for the worker.
The distributor advised that as time progressed, inconsistent supply of the alternative overall and the dependence the customer has on overalls for worker health and safety, re-opened the door for KLEENGUARD*.
Having previously selected the KLEENGUARD* A20 coveralls for their fit, durability, flexibility and breathability product attributes the customer was delighted to see that the product was the same quality today as it was more than a decade ago.
We were told this resulted in procurement reassessing cost and value. Although the unit cost of KLEENGUARD* A20 was slightly higher than the alternative product, the added durability and flexibility meant one coverall would last through a shift.
10
11
A20
A70
A80
A45
A40
A50
A10
A 71
EN 1073-2:2002Radioactive dust
contamination protection
EN 13034:2005Type 6
Limited splash protection
CE0120 EN 1149-1:1995Antistatic
EN ISO 13982- 1:2004Type 5
Particle protection
(2) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com.au
KLEENGUARD* A40Water-based/Chemical Liquid and Particle Protection Coverall
Description Size/Code S M L XL XXL XXXL Colour Case Contents PPE Classification Type
A40 Coverall 99790 99791 99792 99793 99794 99795 White 25 × CAT III 5 & 6
11
High Performance Clothing Fabric Outer layer – film coating resists splash and spray from many liquids and dry particulates. Inner layer – cloth-like, yet tough and abrasion-resistant spunbond polypropylene.
Protection against chemical splash and particles
Specially designed body, hood and waist for comfort and safety
Strong triple-stitched seams help protect against tearing
Full length zip, facilitates putting on/taking off garment
Low-lint performance, film laminate and internal seams help reduce levels of lint
Film laminate technology provides a barrier against a wide range of chemicals
Particle protection, keeps out > 99% of fibres greater than 1 micron
Antistatic fabric EN 1149-1 for critical areas
Silicone-free, ideal for paint-spraying
EN 1073-2 approved for radioactive dust protection1
Compressed packaging provides auto-dispensing system and reduces storage space
Sealed polybags for low contamination risk
Our Solution• Provides the best level of protection in the
Kimberly-Clark Type 5/6 range• Is made from a high-performance film
laminate fabric, providing durability, strength and protection• Is low linting, minimising cross-contamination• Provides protection against chemical splash and particles
Areas of Use• Paint spraying in Automotive
and Aerospace• Pharmaceutical industries• Manufacturing• Utilities• Electronics• Agriculture
(1) Provides no protection against radioactive radiation
12
A20
A70
A80
A45
A40
A50
A10
A 71A 71
Description Size/Code M L XL XXL XXXL Colour Case Contents PPE Classification Type
A71 Coverall 96760 96770 96780 96790 96800 Yellow 10 × CAT III 3, 4 & 5
EN 14605:2005Type 4-B
Spray tight clothing
CE0120 EN 1149-1:1995Antistatic
EN 14605:2005Type 3
Liquid tight clothing
EN ISO 13982- 1:2004
Type 5-BParticle protection
EN 1073-2:2002Radioactive dust
contamination protection
EN 14126:2003Infective agents
protection
KLEENGUARD* A71Chemical Permeation and Liquid Jet Protection Coverall
(2) For the latest information on Chemical protection, please visit our website: www.kcprofessional.com
High Performance Clothing Fabric Outer layer – film coating resists splash and spray from many liquids and dry particulates. Inner layer – cloth-like, yet tough and abrasion-resistant spunbond polypropylene.
Protection against aqueous chemical jet & spray(1)
Durable film laminate with sewn and taped seams provides a strong barrier to chemical spray
Sewn and taped seams with tear resistant fabric offer a strong liquid-tight barrier
Storm-flap and hood designed for easier taping to a respirator
Elasticated hood, cuffs and waist designed for better comfort and safety
Highly visible for improved worker safety
Silicone-free and anti-static fabric EN 1149-1 for critical areas
EN 14126 approved for infective agents protection
EN 1073-2 approved for radioactive dust protection1
Our Solution• Suitable for handling of aqueous
chemicals, low pressure industrial cleaning and maintenance
Areas of Use• Viral and biohazard clean up• Handling of aqueous chemicals• Low pressure industrial cleaning
and maintenance• Oil & Gas industry• Food Processing industry
(1) Provides no protection against radioactive radiation
13For more information, please visit www.kcprofessional.com.au
KLEENGUARD*InsightsLeading Consumer Products Company
Our distributor said that at a leading consumer products company, production efficiency centered around preventative quarterly maintenance and regular product changeover cleaning.
We were told that to change the manufacturing of one product line to another, the line is shut down, thoroughly scrubbed and completely cleaned using detergent and high pressure hoses.
The maintenance team use coveralls to protect their clothing from damage during cleaning. As they need to get into difficult to reach places they need to be flexible and agile and not be constrained by the fit of their coverall.
We were told that the customer was dissatisfied with the performance of their existing coverall. Their workers found the product regularly ripped when completing normal work tasks and were uncomfortable to wear, even more so in hot and humid conditions.
As the product usage continued to climb with workers replacing ripped coveralls during a shift the customer approached the distributor for other options. The distributor offered three alternative products for customer trial including the KLEENGUARD* A20.
We understand after rigorous user testing the KLEENGUARD* A20 was chosen as the best fit for purpose coverall available. As a more robust product, less coveralls were required per shift, reducing waste and replacement costs.
The maintenance team valued the comfort and fit as highly as they rated the KLEENGUARD* flexibility and durability.
The KLEENGUARD* A20 allowed for an increased range of movement and performed at its best for the entire shift. The breathability of the coverall reduced worker discomfort from heat and humidity.
13
14
Industries
OIL & GAS
AVIATION
MINING
PHARMACEUTICAL
SHIPPING
FOO
D P
RO
CE
SSIN
G
AU
TO
MO
TIV
E
14
15
At Kimberly-Clark Professional, Safety Is Paramount
Kimberly Clark Professional* is deeply committed
to safety. Our legacy of safety spans more than 140
years and involves more than 30,000 employees in
manufacturing globally.
Our focus on safety underpins our enviable safety
record. At Kimberley-Clark Professional safety is a value,
not a priority. Keeping our people safe and productive
is at the core of everything we do. We share this safety
ethos with our clients to create exceptional workplaces.
Workplaces that are healthier, safer and more productive.
The safety business is a growing at 25 – 30% in growth
markets. The existing product brands in Safety are
KleenGuard *& Jackson Safety*.
We are committed to building out , innovating or
differentiating to create a robust Safety bundle that
are solutions to end users’ needs
Why partner with Kimberly-Clark Professional• Relationships are important. Our commitment to
create exceptional workplaces for our customers will
create consumables management opportunities for
our distributors.
• Our Safety business is forecast to grow at more than
20% per annum in growth markets . We’d love you to
enjoy the benefits of growth.
• We are continuing to develop and expand our Safety
solutions. A range of safety products allows for
broader consumables engagement with the end user.
• Our expertise in industrial markets provides our
customers and distributors with access to the
knowledge and experiences of a global team
Kimberly-Clark Australia Pty Ltd52 Alfred Street, Milsons Point NSW 2061 AustraliaTel: 61-2-99638888
SALES OFFICES
Sydney Melbourne BrisbaneTelephone (02) 9889 8871 Telephone (03) 9550 8055 Telephone (07) 3213 1155Facsimile (02) 9889 8891 Facsimile (03) 9550 8099 Facsimile (07) 3213 1188
CUSTOMER ORDER CENTRE CUSTOMER CARE – HELPLINE 1800 647 994 Nothing herein contained shall exclude, restrict New Zealand 0800 447 814 or modify our liability under the Trade PracticesTelephone 1800 810 077 Email [email protected] Act 1974 or any other legislation of a State or TerritoryFacsimile 1800 812 255 www.kcprofessional.com of the Commonwealth of Australia or New Zealand.
® Registered Trademark / *Trademark Kimberly-Clark Worldwide, Inc. © 2015 KCWW
