Key Benefits: valve is hydrostatically tested before · PDF file · 2014-07-31helps ensure Tyco gate valves meet the highest standards, and every Key Benefits: valve is hydrostatically

PRODUCT OVERVIEW

The Tyco Resilient Seated Gate Valve is one of the lightest, most durable gate valves on the market today. Superior materials and design make it easy to operate and built to last. Valve components are designed to be either inherently corrosion resistant or protected with fusion-bonded polyester resin coating for a long, reliable service life and enhanced UV protection for exposed installations. Stringent testing helps ensure Tyco gate valves meet the highest standards, and every valve is hydrostatically tested before leaving the factory. Key Benefits:

// Superior material and design

// Easy to operate

// Lightweight and easy to handle

// Long-term dependability

// FM Approved and 300 psi UL Listed

Resilient Seated Gate Valves

TycoGateValvesPOV.indd 1 7/16/14 12:35 PM

1400 Pennbrook Parkway l Lansdale, PA 19446, USA l +1-800-558-5236 l www.tyco-fire.comCopyright © 2014 Tyco Fire Products LP. l All rights reserved. l Form No. TFP-2014006

Gate Valves

OS&Y and Non Rising Stem Post Indicator Gate Valves are used in fire protection systems for on/off operation. These valves incorporate high strength stainless steel stems, dezincification resistant copper alloy components, high-grade elastomers and quality coating systems. The lightweight ductile iron body weighs less than conventional cast iron valves, which allows for easier handling on site and lower shipping costs. A fully encapsulated EPDM ductile iron wedge helps ensure bubble-tight sealing. Components that are not inherently corrosion resistant are coated with a thermally applied fusion-bonded epoxy.

The gate sealing design combines wedge and compression mechanisms to achieve low torque, drop tight sealing. The stem seal arrangement incorporates five separate O-rings to provide a lifetime seal. Available end connections include flange-by-flange, flange-by-groove and groove-by-groove configurations. The FM Approved and UL Listed valves conform to other international standards including: BS 5163, EN 1074, EN1171 and ISO 7259. OS&Y gate valve sizes range from 2 to 12 inches (DN50 – DN300) with a maximum operating pressure of UL-300 psi (20,87 bar) and FM-232 psi (16 bar). Non Rising Stem Post Indicator Gate Valves require the use of an indicator post in order to operate. Valve sizes range from 4 to 12 inches (DN100 – DN300) and offer a maximum operating pressure of UL-300 psi (20,7 bar) and FM-232 psi (16 bar).

Refer to Technical Data Sheets TFP1540 & TFP1545 for complete description of all listing criteria, design parameters, installation instructions, and care and maintenance guidelines.

Indicator Post

The adjustable indicator post is designed for buried applications, such as underground water supplies, and is used with 4 to 12 inch (DN100 to DN300) Non Rising Spindle, Resilient Seated PIV Gate Valves. Buried valves commonly are used in fire protection systems to control water supply to automatic sprinklers, water spray deluge, foam-water deluge or standpipe systems.

The indicator post features a telescoping stem that can be adjusted to its final position in the field and is available in four different lengths. The appropriate post type for a particular application depends on the size of the valve and trench depth. The posts are normally used with clockwise closing valves but may be ordered for use with counterclockwise closing valves.

Wall indicator posts are utilized in applications such as interior water systems and for the above ground actuation of gate valves. Both types of indicators provide external visual indication of the open or shut status of the valve as well as a locking mechanism to secure the position.

TycoGateValvesPOV.indd 2 7/16/14 12:36 PM

Used in fire protection systems for on/off operation, Tyco Resilient Seated Gate Valves incorporate high strength stainless steel stems, dezincification resistant copper alloy components, high-grade elastomers and quality coating systems. The lightweight ductile iron body weighs less than conventional cast iron valves, which allows for easier handling on site and reduces shipping costs. A fully encapsulated EPDM ductile iron wedge is intended to achieve bubble-tight sealing. Components that are not designed to be inherently corrosion resistant are coated with a thermally applied fusion-bonded epoxy.

The gate sealing design combines wedge and compression mechanisms to achieve low torque, drop tight sealing.

The stem seal arrangement incorporates five separate O-rings designed to provide a lifetime seal. Available end connections include flange-by-flange, flange-by-groove and groove-by-groove configurations.

The FM Approved and UL Listed valves conform to other international standards including: BS 5163, EN 1074, EN1171 and ISO 7259. Non Rising Stem Post Indicator Gate Valves require the use of an indicator post in order to operate. Valve sizes range from 4 to 12 inches (DN100 – DN300) and offer a maximum operating pressure of UL-300 psi (20,7 bar) and FM-232 psi (16 bar).

Features & Benefits:

/ / Lightweight ductile iron body and bonnet

/ / Lower operating torque, designed for a higher life cycle

/ / Replaceable or repairable stem seals

/ / Multiple configurations and operation modes

Safer.Smarter.Tyco™

NON RISING STEM GATE VALVES AND INDICATORSResilient Seated Gate Valves

/ / Ductile iron wedge gate, fully encapsulated with EPDM rubber

/ / Fusion-bonded polyester resin coating inside and out

/ / Designed for lifetime corrosion and operating protection

NRS-GateValveProductFlyer4pg.indd 1 7/16/14 12:37 PM

PRODUCT SPECIFICATIONS

Flanged-Flanged Flanged-Grooved Grooved-Grooved

19

12

1

2

4

18

3

20

5

14

1110

2

87

9

5

17

14

16

13

15

6

Valve Size Inches (DN)

4 (100)

6 (150)

8 (200)

10 (250)

12 (300)

Face to face (L) Inches (mm)

9.00 (229)

10.50 (267)

11.50 (292)

13.00 (330)

14.00 (356)

Centre Height (CL1) Inches (mm)

13.07 (332)

17.17 (436)

20.47 (520)

24.41 (620)

26.38 (670)

Grooved version (OD) Inches (mm)

OD type 1 4.500 (114,3)

6.500 (165,1)

8.625 (219,1)

10.750 (273,1)

12.750 (323,9)

OD type 2 4.500 (114,3)

6.625(168.3)

8.625 (219,1)

10.750 (273,1)

12.750 (323,9)

Weight Lbs. (Kg)

Flanged-Flanged 70.5 (32)

103.6 (47)

169.7 (77)

240.3 (109)

295.4 (134)

Flanged-Grooved 55.1 (25)

83.8 (38)

134.5 (61)

202.8 (92)

262.4 (119)

Grooved-Grooved 48.5 (22)

75.0 (34)

123.5 (56)

180.8 (82)

235.9 (107)

# Description Material

1 Wedge Nut Bronze

2 Stem Stainless Steel

3 Bonnet Screw Black Oxide Carbon Steel

4 Sealing Gasket EPDM

5 Bonnet FBE Coated Ductile Iron

6 Sealing O-Ring NBR


8 Stem Ring Stainless Steel

9 Stem Bearing Bronze

10 Dust Guard EPDM

11 Top Cap FBE Coated Ductile Iron

12 Cap Screw Black Oxide Carbon Steel


14 Indicator Flange FBE Coated Ductile Iron

15 Indicator Top Screw Black Oxide Carbon Steel

16 Bushing Nylon


18 Screw Grouting Activated Resin

19 Wedge EPDM Coated Ductile Iron

20 Body FBE Coated Ductile Iron



1 Cotter Pin Carbon Steel

2 Screw Pin M16 Zinc Coated Carbon Steel

3 Hex Cap Screw M16 Zinc Coated Carbon Steel

4 Hex Nut M16 Zinc Coated Carbon Steel

5 Upper Pipe FBP Coated Carbon Iron

6 Lower Pipe FBP Coated Carbon Iron

7 Eye Bolt M12 Zinc Coated Carbon Steel

8 Target “SHUT” Aluminum

9 Screw M6 Zinc Coated Carbon Steel


11 Target “OPEN” Aluminum

12 Stem Nut Bronze

13 O Ring NBR

14 Wench 1/2 FPB Coated Ductile Iron

15 Operating Stem Bronze

16 Hex Socket Set Screw Stainless Steel

17 Post Cap FBP Coated Ductile Iron


19 Pipe Plug 1/2" NPT Zinc Coated Carbon Steel

20 Carrier Plate Carbon Steel

21 Hex Cap Screw M12 Zinc Coated Carbon Steel

22 Flat Washer 12 Zinc Coated Carbon Steel

23 Extension Rod FBP Coated Carbon Steel

24 Connect Cap FBP Coated Ductile Iron

25 O Ring NBR

26 Bottom Flange FBP Coated Ductile Iron

27 Ferrule Zinc Coated Carbon Steel

28 Window Plastic

29 Gasket NBR



812111

4

12

QTY.

1

4

11

1

1

14

2

11

1

22

1

1

12

1

11

2

22

. . . . . . . . .

. . . . . . . .

. . . . . . . . . .. . . . . . . .

. . . . . . . . . . . .

. . . . . . . . . . .

. . . . . . . . . .

. .

. . . . . . . . . . .

. . . . . . . .

. . . .

. . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . . .

. . . . . . . . . . . .

. . . . . . .

. . . . . .

. . . . . . . . . . .

.

. . . . . . . . . . . . .. . . . . . . . . . . .

. . . . . . .

. . . . . . .. . . . .

. . . . . . . . . . . . .

. . . . . . . . .

. . . . . . . .

. .

. . . . . . . . . . . . .

.

.

6

43

5

21

789

10

NO.

11

1314

1617

15

1918

12

29

20

2223

2526

24

2827

21

3031

DESCRIPTIONCotter PinScrew PinHex Cap Screw M16Hex Nut M16Upper Pipe

Target "SHUT"Screw M6

Lower Pipe

Hex Nut M6

Eye Bolt M12

Zinc Coated Carbon Steel


FBE Coated Carbon SteelZinc Coated Carbon Steel

Carbon Steel


FBE Coated Carbon Steel

Aluminum



MATERIAL

FBE Coated Ductile Iron

Bronze

Pipe Plug 1/2" NPT

O-Ring

Screw M6

Operating StemHex Socket Set Screw

Stem Nut

Wrench

Post Cap

Target "OPEN"


Aluminum


NBR

BronzeStainless Steel


FBE Coated Carbon Steel


WindowGasket

Flat Washer M12

Ferrule

Connect CapO-Ring

Hex Cap Screw M12

Extension Rod

Bottom Flange

Carrier Plate

PlasticNBR

Carbon Steel



FBE Coated Ductile IronNBR

Carbon Steel

Hex Socket Set Screw Stainless SteelHex Socket Set Screw Stainless Steel

11

12

15

19

10

9

8

22

21

4

3

25

24

1

2

26

23

6

5

18

28

27

7

20

17

29

14

16

13

30

31



1 Connect Cap FBE Coated Ductile Iron


3 Post Body FBE Coated Ductile Iron





8 Stem Nut Bronze


10 Handwheel FBE Coated Ductile Iron




14 O-Ring NBR


16 Screw M6 Carbon Steel

17 Ferrule Carbon Steel

18 Window Plastic

19 Gasket NBR



22 Extension Rod FBE Coated Carbon Steel

12 11

1 1 14

2

1

1 12 22 1

21 1

QTY

.

81

QTY

.

1

1

. . .

. . .

. .

. . .

. . .

. . .

. . .

. . .

. . .

. .

. . .

.

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

. . .

. . .

.. .

. . .

.. .

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

.. .

. . .

. . .

. . .

.

. . .

. . .

.

. . .

. . .

. . .

. . .

.. .

. . .

. . .

.. .

. . .

. . .

.

. . .

. . .

. . .

. .. .

. . .

. . .

. . .

. . .

. . .

. .

. . .

. . .

. .

. . .

. .

643 521 7 8 9 10

NO

.12 13 14 15 16 17 18 19 20

NO

.

112221

Targ

et "S

HU

T"

Scre

w M

6Ey

e Bo

lt M

12Zi

nc C

oate

d Ca

rbon

Ste

elZi

nc C

oate

d Ca

rbon

Ste

el

Alu

min

umFB

E Co

ated

Duc

tile

Iron

Bron

ze

Pipe

Plu

g 1/

2" N

PT

O-R

ing

Scre

w M

6

Ope

ratin

g St

em

Hex

Soc

ket S

et S

crew

Stem

Nut

Han

dwhe

elTa

rget

"OPE

N"

Zinc

Coa

ted

Carb

on S

teel

Alu

min

um

NBR

Bron

ze

Stai

nles

s St

eel

Zinc

Coa

ted

Carb

on S

teel

FBE

Coat

ed C

arbo

n St

eel

Win

dow

Gas

ket

Ferr

ule

Exte

nsio

n Ro

d

Plas

ticN

BR

Carb

on S

teel

DES

CRIP

TIO

N

Cott

er P

inPo

st B

ody

Carr

ier P

late

Hex

Nut

M6

Carb

on S

teel

Carb

on S

teel

Zinc

Coa

ted

Carb

on S

teel

FBE

Coat

ed D

uctil

e Iro

n

MAT

ERIA

LD

ESCR

IPTI

ON

MAT

ERIA

LCo

nnec

t Cap

FBE

Coat

ed D

uctil

e Iro

n

Eye

Bolt

M16

Zinc

Coa

ted

Carb

on S

teel

Flat

Was

her M

16Zi

nc C

oate

d Ca

rbon

Ste

el

18

5

2

21

3

22

1

16

19

4

6

7

8

20

10

14

15

17

9

1211

13

Always refer to the Technical Data Sheet TFP1545 for complete description of all Listing criteria, design parameters, installation instructions, care and maintenance guidelines, and our limited warranty.

Tyco Fire Protection Products www.tyco-fire.com

Technical Services - Phone: 800-381-9312Fax: 800-791-5500

All brand names, product names or trademarks belong to their respective owners. Tyco Fire Protection Products reserves the right to change product design and specifications without notice. Copyright © 2014 Tyco Fire Products LP. All rights reserved.

TFP-2014007



1 Connect Cap FBE Coated Ductile Iron


3 Post Body FBE Coated Ductile Iron





8 Stem Nut Bronze


10 Handwheel FBE Coated Ductile Iron




14 O-Ring NBR


16 Screw M6 Carbon Steel

17 Ferrule Carbon Steel

18 Window Plastic

19 Gasket NBR



22 Extension Rod FBE Coated Carbon Steel

12 11

1 1 14

2

1

1 12 22 1

21 1

QTY

.

81

QTY

.

1

1

. . .

. . .

. .

. . .

. . .

. . .

. . .

. . .

. . .

. .

. . .

.

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

. . .

. . .

.. .

. . .

.. .

. . .

. . .

. . .

.

. . .

. . .

. . .

. . .

.. .

. . .

. . .

. . .

.

. . .

. . .

.

. . .

. . .

. . .

. . .

.. .

. . .

. . .

.. .

. . .

. . .

.

. . .

. . .

. . .

. .. .

. . .

. . .

. . .

. . .

. . .

. .

. . .

. . .

. .

. . .

. .

643 521 7 8 9 10

NO

.12 13 14 15 16 17 18 19 20

NO

.

112221

Targ

et "S

HU

T"

Scre

w M

6Ey

e Bo

lt M

12Zi

nc C

oate

d Ca

rbon

Ste

elZi

nc C

oate

d Ca

rbon

Ste

el

Alu

min

umFB

E Co

ated

Duc

tile

Iron

Bron

ze

Pipe

Plu

g 1/

2" N

PT

O-R

ing

Scre

w M

6

Ope

ratin

g St

em

Hex

Soc

ket S

et S

crew

Stem

Nut

Han

dwhe

elTa

rget

"OPE

N"

Zinc

Coa

ted

Carb

on S

teel

Alu

min

um

NBR

Bron

ze

Stai

nles

s St

eel

Zinc

Coa

ted

Carb

on S

teel

FBE

Coat

ed C

arbo

n St

eel

Win

dow

Gas

ket

Ferr

ule

Exte

nsio

n Ro

d

Plas

ticN

BR

Carb

on S

teel

DES

CRIP

TIO

N

Cott

er P

inPo

st B

ody

Carr

ier P

late

Hex

Nut

M6

Carb

on S

teel

Carb

on S

teel

Zinc

Coa

ted

Carb

on S

teel

FBE

Coat

ed D

uctil

e Iro

n

MAT

ERIA

LD

ESCR

IPTI

ON

MAT

ERIA

LCo

nnec

t Cap

FBE

Coat

ed D

uctil

e Iro

n

Eye

Bolt

M16

Zinc

Coa

ted

Carb

on S

teel

Flat

Was

her M

16Zi

nc C

oate

d Ca

rbon

Ste

el

18

5

2

21

3

22

1

16

19

4

6

7

8

20

10

14

15

17

9

1211

13





TFP-2014007


Used in fire protection systems for on/off operation, Tyco Resilient Seated Gate Valves incorporate high strength stainless steel stems, dezincification resistant copper alloy components, high-grade elastomers and quality coating systems. The lightweight ductile iron body weighs less than conventional cast iron valves, which allows for easier handling on site and reduces shipping costs. A fully encapsulated EPDM ductile iron wedge is intended to achieve bubble-tight sealing. Components that are not designed to be inherently corrosion resistant are coated with a thermally applied fusion-bonded epoxy.

The gate sealing design combines wedge and compression mechanisms to achieve low torque, drop tight sealing.

The stem seal arrangement incorporates five separate O-rings designed to provide a lifetime seal. Available end connections include flange-by-flange, flange-by-groove and groove-by-groove configurations. In addition, the Tyco OS&Y Gate Valve incorporates a unique design feature that provides a backup sealing device for the O-ring stem. This can be activated with the valve under full working pressure in the unlikely event of future leakage past the primary seals.

The FM Approved and UL Listed valve conforms to other international standards including: BS 5163, EN 1074, EN1171 and ISO 7259. OS&Y gate valve sizes range from 2 to 12 inches (DN50 – DN300) with a maximum operating pressure of UL-300 psi (20,87 bar) and FM-232 psi (16 bar).

OS&Y GATE VALVESResilient Seated Gate Valves

Features & Benefits:

/ / Lightweight ductile iron body and bonnet

/ / Lower operating torque, designed for a higher life cycle

/ / Replaceable or repairable stem seals

/ / Multiple configurations and operation modes

Safer.Smarter.Tyco™

/ / Ductile iron wedge gate, fully encapsulated with EPDM rubber

/ / Fusion bonded polyester resin coating inside and out

/ / Designed for lifetime corrosion and operating protection

OS&YProductFlyer.indd 1 7/16/14 12:36 PM





TF-2012008

PRODUCT SPECIFICATIONS

Valve Size Inches (DN)

2 (50)

2-1/2 (65)

3 (80)

4 (100)

6 (150)

8 (200)

10 (250)

12 (300)

Face to face (L) Inches (mm) 7.00(178)

7.50(190)

8.00(203)

9.00(229)

10.50(267)

11.50(292)

13.00(330)

14.00(356)

Centre Height Open (CL1) Inches (mm) 15.55(395)

16.14(410)

18.9(480)

22.56(573)

29.53(750)

37.64(956)

46.25(1175)

51.89(1318)

Centre Height Closed (CL2) Inches (mm) 13.07(332)

13.31(338)

14.96(380)

17.72(450)

23.31(592)

29.45(748)

34.96(888)

39.57(1005)

Grooved version OD Inches (mm)

OD1 2.375(60.3)

2.875(73.0)

3.500(88.9)

4.500(114.3)

6.500(165,1)

8.625(219.1)

10.750(273.0)

12.750(323.9)

OD2 2.375(60.3)

3.000(76.1)

3.500(88.9)

4.500(114.3)

6.625(168,3)

8.625(219.1)

10.750(273.0)

12.750(323.9)

Weight Lbs. (Kg)

FL-FL 29.8(13.5)

35.3(16)

41.9(19)

57.3(26)

97.0(44)

154.4(70)

264.6(120)

330.8(150)

FL-GR 27.6(12.5)

30.9(14)

36.4(16.5)

50.7(23)

88.2(40)

143.2(65)

242.6(110)

297.7(135)

GR-GR 25.4(11.5)

26.5(12)

30.9(14)

44.1(20)

79.4(36)

110.3(50)

220.5(100)

275.6(125)


1 Wedge EPDM Coated Ductile Iron

2 Wedge Nut Cold Forged Copper Alloy

3 Stem Pin Stainless Steel AISI 420

4 Sealing Gasket EPDM-70

5 Sealing O Rings NBR

6 Stem Guide Copper Alloy

7 Stem O Rings NBR

8 Compression Washer Stainless Steel AISI 420

9 Top Gland FBP Coated Ductile Iron

10 Fixing Washers Copper Alloy

11 Top Nut Copper Alloy

12 Hand Wheel FBP Coated Ductile Iron

13 Yoke FBP Coated Ductile Iron

14 Stem Stainless Steel AISI 420

15 Gland Stud Zinc Coated Mild Steel

16 Gland Nut Zinc Coated Mild Steel

17 Gland Washers Zinc Coated Mild Steel

18 Bonnet Casting FBP Coated Ductile Iron

19 Screw Grouting Activated Resin (removable)

20 Bonnet Screws Black Oxide Finished Carbon steel

21 Body Casting FBP Coated Ductile Iron

1

20

19

2

14

9

18

21

3

13

11

10

12

4

15

8

7

6

185

17

22

9

13

17

1614

Flanged-Flanged Flanged-Grooved Grooved-Grooved

OS&YProductFlyer.indd 2 7/16/14 12:36 PM

Documents

Key Benefits: valve is hydrostatically tested before · PDF file · 2014-07-31helps ensure Tyco gate valves meet the highest standards, and every Key Benefits: valve is hydrostatically