SERVICES • Expertly trained sales team • Technical assitance for product selection and installation troubleshooting • Experienced project scheduling and logistics • UL®-Approved Panel Shop to save time and money on your installation • Custom tagging available for almost any need • FREE valve assembly • FREE cal ibration
SOLUTIONS • Partner with us from bidding to completion • Proven solutions to common BAS challenges • Lower overal l LARGE project costs by using our experts to source and coordinate your job • Pre-sale and post-sale support • Total package solution
SECTION 1 PAGES 1-64 Dampers, Direct Coupled Actuators, Damper Accessories
SECTION 3 PAGES 105-208 Ball, Butterfly, Solenoid, Globe, Zone
SECTION 9 PAGES 497-568 RH, Dew Point, Wet Bulb, Enthalpy, Room, Duct, OSA
SECTION 10 PAGES 569-608 Fluid Level Switches, Ultrasonic Level Switches and Transmitters, Water Detectors
SECTION 11 PAGES 609-680 Lighting Control Panels, Occupancy Sensors, Light Level Transmitters and Switches, Time Switches, Contactors, Relays
SECTION 12 PAGES 681-712 Variable Frequency Drives and Bypasses, Motor Starters, Motor Disconnects
SECTION 2 PAGES 65-104 Loop Powered Indicators, Tower Lights , Alarm Indication Stations, Strobes and Horns, Emergency Operator Stations, Runtime Accumulator
SECTION 4 PAGES 209-232 Flexible Conduit, Conduit Fittings, Boxes, Covers, Weatherproof Boxes, Hangers, Wire, Terminals, Tape, Markers, Switches, Receptacles, Plugs, Safety Switches
SECTION 5 PAGES 233-272 General Purpose, NEMA 1, 3R, 12, 4 and 4X, Perforated and Solid Panels
SECTION 6 PAGES 273-344 Transmitters, Sensors, Switches, BTU Meters, Flow Totalizers, Flow Devices for Air, Water, and Steam
SECTION 7 PAGES 345-440 Carbon Dioxide, Carbon Monoxide, Conductivity pH, Refrigerant, Toxic and Combustible Gas, IAQ, Weather Instruments
SECTION 8 PAGES 441-496 Controls, Explosionproof Enclosures, Intrinsic Safety Barriers, Intrinsically Safe and Explosionproof Sensors, Transmitters, Switches, Strobes, Accessories
SECTION 13 PAGES 713-840 Wireless Sensors, Transmitters, Receivers, Repeaters and Gateways, LON Sensors, N2 Sensors
SECTION 15 PAGES 873-912 Valve Actuators, Damper Actuators, Thermostats, Tubing, Fittings, EP Valves , Pressure Reducing Devices
SECTION 16 PAGES 913-976 Current and Potential Transformers, Current Switches, Current Transducers, Voltage Monitors, Phase Loss, Power Factor, Power Monitors
SECTION 17 PAGES 977-1008 Control Transformers, Linear, Switching, DIN Rail, DC Power Supplies, Uninterruptible Power Supplies (UPS)
PSI SECTION 18 PAGES 1009-1120 Transmitters, Differential Transmitters, Switches, Gauges, Room Pressure Sensors, Snubbers
SECTION 19 PAGES 1121-1168 Plug-In, Power, Multi-Voltage, Time Delay, Alternating, Contactors, Enclosed Relays
SECTION 20 PAGES 1169-1304 Thermistors, RTDs, Transmitters, Infrared, Accessories
70o
SECTION 22 PAGES 1393-1416 Signal Generators, Temperature Meters, Humidity Meters, Carbon Dioxide Meters, Multimeters, Data Loggers, Calibration Devices
SECTION 23 PAGES 1417-1472 Isolation, Multiplexers, Pneumatic, Resistance, Sequencers, Voltage and Current Conversion, Rescalers, Converters, Expanders
SECTION 14 PAGES 841-872 Fuses, Switches, Terminal Blocks, Pilot Lights, Wire Duct, Wire Ties, Bridle Rings, J-Hooks, Beam Clamps,
ACTUATORS & DAMPERS NETWORK & WIRELESS
ALARMS & INDICATION
888-397-5353KELE • www.kele.com © 2014 Kele, Inc. All Rights Reserved. The Kele name and logo are registered trademarks of Kele, Inc.
A2
ON-SITE CUSTOM PANEL SHOP
Kele has been building panels for 30 years. In 2013, the Kele Panel Shop assembled over 5,000 custom panels. We’re here to help you with any of your panel assembly needs.
All custom panel assembly is done in-house. Since Kele’s headquarters, distribution center, and Panel Shop are all strategically located in Memphis, TN, we can immediately source panel fabrication components to use in custom panel jobs directly from our distribution center. This saves on lead time and costs, because we have all of the expertise and products needed to build your custom panel in one location.
• UL Listed & Assembled in the USA
• Kele Performs Quality Control Testing We don’t just build from specifications, we always
test finished panels to make sure all components work in your application.
• Custom Panels, Repeat Panels & Insta-Panels® Available We make it easy for our customers, all you have to do is submit the panel specifications and drawing. We then review and assemble your panels.
• Standard Two-Week Lead Time With Kele’s process and on-site inventory we can stay flexible and work to meet your deadline. Kele’s standard lead time is 2 weeks, but requests can be expedited.
For more information, contact our Panel Shop. Call 888.397.5353 or email us at panels@kele.com Call 888.397.5353 or email us at panels@kele.com
ON-SITE CUSTOM PANEL SHOP
Kele has been building panels for 30 years. In 2013, the Kele Panel Shop assembled over 5,000 custom panels. We’re here to help you with any of your panel assembly needs.
All custom panel assembly is done in-house. Since Kele’s headquarters, distribution center, and Panel Shop are all strategically located in Memphis, TN, we can immediately source panel fabrication components to use in custom panel jobs directly from our distribution center. This saves on lead time and costs, because we have all of the expertise and products needed to build your custom panel in one location.
• UL Listed & Assembled in the USA
• Kele Performs Quality Control Testing We don’t just build from specifications, we always
test finished panels to make sure all components work in your application.
• Custom Panels, Repeat Panels & Insta-Panels® Available We make it easy for our customers, all you have to do is submit the panel specifications and drawing. We then review and assemble your panels.
• Standard Two-Week Lead Time With Kele’s process and on-site inventory we can stay flexible and work to meet your deadline. Kele’s standard lead time is 2 weeks, but requests can be expedited.
For more information, contact our Panel Shop. Call 888.397.5353 or email us at panels@kele.com Call 888.397.5353 or email us at panels@kele.com
CUSTOM VALVE ASSEMBLY
PERSONALIZED TAGGING & LABELING
Because we have our own production shop Kele can ship you product that is ready to install, saving you time and keeping your projects on track. Our custom valves are assembled and shipped the same day you place your order. A free service to you from the experts at Kele.
Many of our customers have discovered our ability to furnish custom products. With our computerized label engraver we can produce engraved labels and logos. We often get orders for custom stainless steel plates with devices mounted. If you need a digital display, some push-buttons and pilot lights mounted on a stainless steel plate, we can do it. We can even have the whole building silk- screened on a plate to put on the enclosure front.
Kele, Inc. is an American company and we are proud to support the American workforce.
In an effort to unite our customers with some of the very best that American manufacturing
has to offer the building automation and HVAC/R industry, we’re proud to present our new
BUY AMERICAN collection.
A4
CALL PURCHASE ORDER
ONE PRODUCT SOURCE: 60,000 SKUs from over 300 manufacturers
ONE SOURCE for AVAILABILITY: Over $10 Million in inventory ready to ship same-day
ONE-CALL TECHNICAL SUPPORT: One of the most responsive and experienced technical sales team in the industry
Make Kele your ONE SOURCE SOLUTION for all of your building automation and HVAC/R needs.
A8 888-397-5353KELE • www.kele.com
1. SALES POLICY:
All orders must be single release for immediate shipment to a single destination. Unless instructed otherwise, partial shipments will be made. Freight and handling fees will be added to each shipment.
2. PRICES ARE SUBJECT TO CHANGE WITHOUT NOTICE:
In the event of a price change, the unshipped portion of any order could be billed at the new price. Our minimum billing is $25.00 plus freight charges.
3. NONSTOCK AND NONCATALOG ITEMS:
Products not listed in the current price list or listed as “nonstock” items are considered to be special order items and may be subject to minimum order quantities, special handling charges, and/or other conditions stipulated by our supplier. Shipments will be made as soon as the items are received from our supplier. Special order items may carry cancellation charges once an order is placed and may also be subject to a restricted return policy.
4. SHIPPING INFORMATION:
United States • Options for material from stock:
A. UPS Surface – One to six days anywhere in the continental United States B. Federal Express “Express Saver” – Three-day service in the continental United States C. UPS Blue and Federal Express Economy – Two-day service D. UPS Three-day Select – Three-day service anywhere in the continental United States E. Federal Express Standard Overnight – Delivery by 3:00 p.m. the next business day ** F. UPS Red Label and Federal Express Priority One Overnight – Delivery by 10:30 a.m. the next business day **
• Freight plus a handling fee of up to $5.00 will be added to each shipment.. • Orders for in-stock items entered by 5:00 p.m. Central time will ship same day. • Other shipping arrangements are available. Please consult your Kele Sales Associate for special requests. **Delivery times may vary in some areas. Consult your UPS or Federal Express representative for details.
International • Options for material from stock:
A. Federal Express International Services B. UPS Other carriers available upon request.
• Freight plus a $10.00 handling fee will be added to each shipment. • Orders for in-stock items entered by 1:30 p.m. Central time will ship that day for open account customers pending original invoice requirements. • International shipments may be sent freight collect at consignee’s discretion. Note that all freight collect shipments require the customer’s account number with the
selected forwarder. Any freight collect charges billed back to Kele will be invoiced to the customer’s Kele account. • Other shipping arrangements are available. Please consult your international sales contact for special requests. **Delivery times may vary by country and city locations. Consult your Federal Express or UPS representative for details.
5. FREIGHT:
Customer is responsible for all shipping and handling charges. All domestic shipments are FOB destination. All international shipments are Ex Works. Claims for loss or damage in transit must be made with the carrier by the customer. All shipments should be unpacked and inspected immediately upon receipt. If damage does not become apparent until shipment is unpacked, customer must make a request for inspection by the carrier’s agent and file with the carrier. Any external evidence of loss or damage must be noted on the freight bill or carrier’s receipt and signed by the carrier’s agent. Failure to do this will result in the carrier’s refusal to honor the claim.
6. PAYMENT TERMS:
United States and Canada A. New accounts: prepayment by a company check or credit card (Visa, MasterCard, American Express, Discover, ACH, Wire) A certified check or credit card is required if the total order amount is $1,000.00 or more. A credit application must be submitted for open account consideration. B. Established accounts: Net 30 days with a past due finance charge rate of 18% per annum. “In the event that it is necessary for seller to employ a collection agent or an attorney, or both, to obtain payment of any amounts due on the buyer’s account, the
buyer agrees to pay all of seller’s collection cost.” C. The customer is responsible for all fees associated with wires including banking fees and intermediary fees. Each performa and invoice will have a line item wire fee
of $25.00 (domestic) and $50.00 (international). D. There is a $25.00 return check fee charge. E. Accounts with balances exceeding 30 days past due will be subject to credit card terms F. Accounts with balances exceeding 60 days past due will be subject to restricted shipments G. Accounts with balances exceeding 90 days past due will be subject to 3rd party collection and/or legal actions at customer’s expense.
International Payment terms: Export orders are accepted on the basis of payment in advance of shipment by check in U.S. funds, wire transfer, international money order, credit card (Visa, MasterCard, or American Express, Discover) or letter of credit. A. Open Accounts: Will be considered upon receipt of a credit application. B-G. (See above) H. Letter of Credit: Payment may be made by irrevocable confirmed L/C provided that the total invoice value of the export order is more than U.S. $10,000.00. Large
multi-line L/C orders must allow for two partial shipments and be valid for a period of at least one hundred and fifty (150) days. Payments will be made in U.S. dollars. A $500 or .05% of L/C (whichever is greater) fee will be charged for L/Cs.
I. Duties and taxes for international shipments are the responsibility of the consignee. Duties and taxes inadvertently charged to Kele will be invoiced to the customer’s Kele account.
TERMS OF SALE
A9 888-397-5353KELE • www.kele.com
7. CREDITS:
It is Kele’s Credit Apply Policy to leave credits on account up to 60 days. Customer is to apply credits and notify dlcredit@kele.com immediately upon receipt of credit. If credit is over 60 days old, a customer refund will be issued unless requested otherwise.
8. NEW/UNUSED RETURNS:
Any material returned must have a return authorization number to be considered for credit. Material returned for credit is subject to: A. 15% restocking charge or $25.00, whichever is greater, if the product is unopened and returned within 90 days of shipment, or B. 25% or $35.00, whichever is greater, if opened or returned over 90 days from shipment.
Returns resulting from errors by the seller will not be subject to these charges. Shipments not covered by a valid RMA number may be subject to refusal of delivery. New and used returned product shall be received in original packaging. No returns allowed on product over 180 days (six months from shipment date). Custom products are not returnable for credit. Freight or other costs incurred in restocking will be deducted from the product credit memo. Return of nonstocked items is subject to manufacturer’s acceptance. Returned material must be shipped prepaid.
9. WARRANTY RETURNS:
Warranty periods vary on products sold and period for each may be found under specifications on catalog page or Kele website. Any material returned must have a return authorization number. Returned material is to be shipped prepaid. Product returned may either be repaired, replaced or credited under warranty. An advance replacement may also be requested. Advance replacements will be billed for. Upon receipt, product will be returned to manufacturer for warranty evaluation. Standard lead time for warranty evaluation is 2-4 weeks from date manufacturer has received product back. Replacement/credit to be issued upon confirmation product is covered under warranty. Any product found to not be covered under warranty (customer damaged/no problem found) can either be returned to customer as is or scrapped.
10. WARRANTY:
Kele, seller of the products described in this catalog, believes that technical information, specifications, test results, and recommendations herein are correct, but does not guarantee their accuracy or completeness. The seller provides no warranties beyond those offered by the manufacturer. The seller will provide repaired or replacement material as directed by the manufacturer. Since the seller, Kele, does not control the use of its products, there are no express warranties that extend beyond the description contained herein. SELLER DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR OF FITNESS FOR ANY PARTICULAR PURPOSE. Since the seller cannot control the manner of use of its products after their sale, seller will not be responsible for any consequential or indirect damages. Since seller is only acting as a distributor of products manufactured by other companies, liability for breach of warranty claims shall be limited to the manufacturer. No manufacturer’s warranty will apply to products which are in any way altered or modified after delivery by seller. Terms of Buyer’s or User’s purchase order shall not supersede this disclaimer and no warranty, expressed or implied, other than stated herein, shall be effective unless contained in an agreement signed by an officer of Kele.
11. CONSEQUENTIAL DAMAGES:
The seller shall not be liable for any consequential, contingent, or incidental damages whatsoever.
12. DISCLAIMER:
This Catalog comprises a general overview of the products described herein. It is solely for information purposes. Users must independently evaluate the suitability of, and test each product for their application. Kele, Inc. makes no warranties or guarantees as to the accuracy or completeness of the information in this Catalog and disclaims any liability resulting from its use.
Product dimensions in this catalog are nominal and are provided for the convenience of our customers. Kele, Inc. reserves the right to make product changes from time to time, without prior notification, which may change the dimensions shown. We therefore recommend the customer checks each product before using for customer projects or product development and specification.
Kele, Inc.’s only obligations are those in our Standard Terms and Conditions of Sale and in no case will Kele, Inc. be liable for any incidental, indirect, or consequential damages arising from the sale, resale, use, or misuse of its products.
No products should be used, alone, or in conjunction with others, in any product, for a safety related purpose. Kele, Inc. shall have no obligation or responsibility to approve the sale of materials by distributors to customers, it being the sole responsibility of the distributor or customer to determine if the intended use involves product safety issues.
The customer understands and acknowledges that dangers of personal injury are inherent in the event these products are used in violation of the warning set forth herein and customer expressly and voluntarily assumes all risk for injury or death sustained in the event these products are used in violation of the warning set forth herein. Customer indemnifies and holds Kele, Inc. harmless from any claim, loss or damage resulting there from, including Kele’s reasonable attorneys fees’. The terms of this warning are incorporated by reference in all future purchase orders.
Kele, Inc. reserves the right to change or update, without notice, any information contained in this Catalog. We may change, without notice, the design, construction, materials, processing, or specification of any products; and to discontinue or limit production or distribution of any products. For any items not manufactured by Kele or Kele Precision Manufacturing, please consult the manufacturer’s customer service line or website for the most up to date information and product details.
13. RIGHT TO SUBSTITUTE:
The seller reserves the right to substitute materials used in construction of equipment sold, provided said substitution does not modify the operational characteristics of the equipment sold.
14. HOURS OF OPERATION:
Central Time Zone: Sales Office 6:30 AM - 7:00 PM - Business Office 8:00 AM - 5:00 PM Fax/E-Mail/Web Orders: 24 hours a day - Orders will be acknowledged during normal hours of operation.
Voice mail messaging is available after normal hours.
THESE TERMS OF SALE MAY BE MODIFIED WITHOUT NOTICE. THE TERMS OF SALE AT THE TIME OF SALE SHALL APPLY. THE SELLER AS REFERRED TO IN THE TERMS OF SALE IS KELE, INC.
TERMS OF SALE continued
Actuator Accessories ...................................................7-8 Direct Coupled Actuator ......................................1-2, 9-45 Fail-Safe ................................................................. 43-47 Fire and Smoke ........................................................48-56 Non Spring Return ......................................1, 9-12, 17-27 Spring Return .......................................................2, 28-42 Rectangular Dampers ..............................................61-64 Round Dampers .......................................................57-60
Air Compressor Accessories Filters ....................................................899-900, 903-909 Regulators .............................................899-900, 903-909
Audible .....................................................................67-69 Beacon .....................................................................69-75 Status Indicator ........................................................76-83 Visual Signal ......................................................67-68, 74
Current Switches ...................................939-948, 953-954 Current Transducers ......................941, 948-949, 951-955 Isolation ............................................................1445-1446 Limiter ..............................................................1295-1296
Gauges ................................1101-1102, 1106-1107, 1111 Switches ..............................1070-1083, 1085-1088, 1108 Transmitters (Air) ...... 1009-1010, 1012-1034, 1092-1093, 1095-1096, 1099-1100 Transmitters (Water) .........................................1039-1052
Disconnect ............................................................... 845, 934 Electric / Pneumatic Valves Air (EP) .......................891-898 Electrical Boxes and Covers ......... 218-221, 383, 389, 1100 Electrical Tapes and Wire Markers ..........................230-232 Electronic/pneumatic transducer .............. 1433-1436, 1454 Emergency Lighting Control ...................................666-671 Emergency Operator Stations .....................................84-91 EnOcean .....................................................813-815, 817-838 Enclosures ................................................................233-272
Accessories ..........................................................270-271 Aspirated ......................................................254-255, 567 Control Cabinets ......................................................... 248 Explosionproof ....................................................481-487 Flush Mount .........................................................246-247 General Purpose ................................................. 263, 269 NEMA 1 .........................................239, 241-247, 249-251 NEMA 12 ..............................................................266-268 NEMA 12 Concept ...................................................... 267 NEMA 3R .............................................................252-255 NEMA 4 ................................................256, 258, 267-268 NEMA 4X .............................................260-262,…