Keep Odors and Germs at Bay · 2019-04-12 · cleaner, cleans hard surfaces, shields the ... Spray or fog the entire interior area then allow a few minutes for the product to bond

Keep Odors and Germs at Bay

Purteq™ is a trademark of PurWorld Technologies, LLC. PurTeq™ is not affiliated with nor endorsed by the

manufacturers of any buildings shown in this brochure.

(888) 584.9997www.purteq.com

You Can Protect Your Health and Safety.

SCIENTIFICALLY ADVANCED CLEAN

™

INTEGRATED AND ECO-FRIENDLY

NANO-TECHNOLOGY TO IMPROVE

THE ENVIRONMENT YOU LIVE IN

This environmentally friendly product employs a linear nonionic surfactant that eliminates microorganisms through hypo-tonic diffusion.

This environmentally friendly product utilizes patent pending Nanodex technol-ogy to naturally remove odors including tobacco, pet and other tough odors.

This environmentally friendly product uses patent pending UV-PCO technology to con-tinue to protect treated surfaces from microorganism growth whenever Ultravio-let light is present.

This environmentally friendly product uses Colloidal technology to dislodge tough to clean grime, dirt, stains and microorgan-isms from carpets and upholstery.

This environmentally friendly 3 in 1 surface cleaner, cleans hard surfaces, shields the surface from adhesion, and protects hard surfaces with a long-lasting antimicrobial coating.

(1 Gal) 3.785 L

00

00

SCIENTIFICALLY ADVANCED CLEANSCIENTIFICALLY ADVANCED CLEAN

™™


™

MADE IN USAManufactured & Distributed By:

Purworld Technologieswww.purteq.com/www.purworld.com


™

00

00


Purworld Technologies

Klenz encapsulates dirt and then crystallizes when it dries, so no sticky residue remains to re-soil treated areas. The encapsulated soil and other residue can be vacuumed, providing for cleaner carpets and exceptional carpet cleaning results.

Directions for use:It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. When using Klenz increased dwell time may be more effective than using more product.Shake before using. Saturate the affected area. For pet stains allow Klenz to stand for 15 minutes or more, then extract or wet vacuum out as much of the solution as possible. On heavily soiled surfaces, agitation and a second application may be necessary.Klenz is a fast-acting, all-natural, 100% plant based carpet cleaning formula that penetrates deep carpet stains. Use the formula to remove tough stains including: pet stains, dairy stains, and ink stains. Klenz works on virtually any type of carpeting without the need to use harmful spot cleaning liquid.

Caution:May cause mild irritation to the nose. Do not drink. Avoid contact with eyes.

First Aid:If swallowed – call your poison control center@ 1-800-222-1222

If contact with eyes – Hold your eyesopen and gently flush with waterfor 10 – 15 minutes,repeat if necessary.

Lot# 041810

(1 Gal) 3.785 L

01

00


™™


™




™

01

00



Prevnt uses an amazing, self-cleaning, titanium dioxide (TiO2) nanotechnology that actually eliminates harmful bacteria, germs, odors and allergens.

Directions for use:It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. When using Prevnt complete surface coverage is necessary.

Shake well before using. Spray or fog the entire interior area then allow a few minutes for the product to bond. Wipe down and buff to a shine on all glass and hard surfaces.

Prevnt’s potent formulation can break down almost any organic compound it touches when exposed to ultraviolet rays of sunlight. The end result: a much healthier environment.




Lot# 041810

UV-PCO SURFACE ANDAIR QUALITY COATING

Lot# 041810(1 Gal) 3.785 L

00

00


™™


™




™

00

00



Shok cleans any surface. It deodorizes. It sanitizes. It coats to stave off microorganisms.

Directions for use:It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Use on fabrics, carpets, upholstery, leather, and all other parts of the interior that may have been contaminated by germs, bacteria and odor causing contaminants.

Shake well before using. Spray or fog on infected area and allow Shok to air dry on all surfaces. SHOK will continue to work after it has dried. Wipe off any residue. Odors and contamination are eliminated at their source and the scientifically crafted formula continues to work with a long lasting residual effect. On severe odors applying Smok Plus first immediately followed by Shok and finishing with an application of Prevnt will eliminate even the toughest of odors.




DISINFECTANTODOR NEUTRALIZER

(1 Gal) 3.785 L

01

00


™™


™




™

01

00



It doesn’t just cover up odors, it eliminates them!

Directions for use:It is a violation of Federal Law to use this product in a manner inconsistent with its labeling. Use on fabrics, carpets, upholstery, leather, and all other parts of the interior that may have been contaminated by odor causing contaminants including tobacco smoke. Shake well before using. Spray or fog on infected area; wipe down all hard surfaces with a damp towel. Allow product to air dry on all fabric surfaces, product will continue to work after it has dried. When treating tobacco and smoke odors you will notice a “stronger odor” after Smok Plus has been sprayed onto a tobacco or cigarette affected surface. This is perfectly normal and demonstrates how powerful Smok Plus is, you can smell it working. The initial “smell” proves it is doing its job and will dissipate quickly, leaving the environment free of tobacco and cigarette odor.

Following Smok Plus with SHOK treatment is recommended and will provide superior results. This will eliminage the odors and the contamination that is causing the odors.

Caution: May cause mild irritation to the nose. Do not drink. Avoid contact with eyes.



Lot# 041810

00

00


™™


™




™

(1 Gal) 3.785 L

00

00



CLEANS everyday deposits of dirt, grime and other organic soil…and simultaneously SHIELDS surfaces against adhesion & build-up of soil and grime with a water, soil and stain repellent barrier coating for easier next-time cleaning….which PROTECTS surfaces with a long-lasting, antimicrobial and resistant barrier coating. Prevents odor-causing bacteria, mold & mildew from growing in between PurTeq applications.

Directions for use:Mist Touch Point on all interior hard surfaces. Buff to a shine using a clean microfiber towel.




Lot# 041810

3-in-1 Surface CareCleaning Preparation

& Barrier Coating

SC

IEN

TIF

ICA

LLY

AD

VA

NC

ED

CL

EA

N

™


™

A revolutionary self-cleaning anti-bacterial treatment.

The PurTeq™ formula uses Ultraviolet (UV) Photocatalytic Oxidation (PCO) Green technology, the very same technology used in hospitals and operating rooms around the world.

The PurTeq™ process will treat the germs, bacteria, mold, mildew, and organic matter that live where you do.

PurTeq is:• Safe• Biodegradable• Non-Toxic• Non-Allergenic

Germs, bacteria, infectious disease, mold spores, mildew, viruses and pet odor all contribute to the overall air quality affecting your families’ health on a daily basis.

PurTeq is an environmentally friendly, water-based solution which, when applied, forms an invisible, long lasting coating that actively protects surfaces from the buildup of organic matter – including bacteria, molds, germs and allergens.

Without the use of harmful chemicals, PurTeq works rapidly and effectively to naturally decompose odors.

Our goal is to provide you an ODOR, GERM, & ALLERGEN free environment.

Using the latest in UV-PCO technology PurTeq™ can quickly and effectively remove pet odors, smoke odors, food odors, germs, bacteria, mold, mildew, stains and other contaminants.

Purteq Products Remove:• Tobacco Smoke• Pet Odors and Stains• Mold, Mildew, & Fungus• Germs, Bacteria, & Allergens• Foul Odors

PurTeq™ is SAFE, GREEN, and will prevent Volatile Organic Compounds and Odors from returning.

Treated Surface

LIGHT SOURCE

AIR PURIFICATION, DEODORIZATION

Documents

Keep Odors and Germs at Bay · 2019-04-12 · cleaner, cleans hard surfaces, shields the ... Spray or fog the entire interior area then allow a few minutes for the product to bond