Crash ProtectionKawasaki H2 SX

Installation Instructions

Installation Instructions

Kit Contents PRN013968

1 x L/H Bobbin Spacer (Longest Spacer) A

1 x R/H Bobbin Spacer (Shortest Spacer) B

1 x M10-120 x 1.25 Caphead C

1 x M10-130 x 1.25 CapheadD

2 x M10 x Washer E

2 x Polyurathane Washer F

2 x Large Bobbin Head G

1Installation Instructions

Caution

Only remove engine boltsfrom one side at a time

2Installation Instructions

BF

GEC

3Installation Instructions

4Installation Instructions

Caution

Please refer to yourowners manual for

torque setting

5Installation Instructions

Caution

Only remove engine boltsfrom one side at a time

6Installation Instructions

A FG

E D

7Installation Instructions

8Installation Instructions

Caution

Please refer to yourowners manual for

torque setting

Installation Instructions

It is recommended that periodic inspections are made to ensure that all bolts are tightend to the specified torque settings.

Should the bike be involved in an accident a thorough inspection should be made and any components that have taken an

impact, no matter how small, be replaced

www.evotech-performance.com