LIGHTING 64HANDLEBAR CONTROLS 65

FOOT CONTROLS 66COVERS, TRIMS & ACCENTS 68

PERFORMANCE 70

FIND MORE ACCESSORIES FOR yOuR kAwASAkI IN MuLTI-FIT

89

KAWASAKI

Found in this Section:

for

61

DRINk HOLDERS 105

PERFORMANCE 70

COVERS, TRIMS & ACCENTS 68

62

VULCAN 900

FOOT PEGS 114

DRIVING LIGHTS 64

HANDLEBAR CONTROLS 65

ACCESSORy MOuNTS 102

FOOT CONTROLS 66

for

63

CONSTELLATION DRIVING LIGHTS with turn signals Patent Pending

With DOT approved H-3 bulbs in a 3” diameter stretched bullet housing that flows down to a coordinating 2-1/4” turn signal housing, these are the answer to exceptional front lighting. Mount directly to your forks with our Two-Piece Clamps. Wiring & adding a switch is simple with our Wiring Relay Kits (P/N’s 2202 or 2328 - sold separately, page 93).

Fits: Universal Applications for Installation with Küryakyn Two-Piece Clamps (Sold Separately - below)

5009 Constellation Driving Lights with Turn Signals (set)

note: turn signals have smoked lenses with amber bulbs.

note: not intended for use with motorcycles that have oem fork shrouds

note: for aPPlications with oem fork shrouds we suggest the constellation driving light bar (P/n 5001 - bPg 91). not for use with küryakyn windshields or fairings.

TwO-PIECE FORk MOuNTSOur sturdy chrome-plated mounts are just the ticket to attach Constellation Driving Lights, Silver Bullets or custom lights using 5/16” mounting hardware to fork tubes.

2286 41mm Two-Piece Fork Mounts (pr)Fits: Vulcan 900 Custom

2275 54mm/58mm Two-Piece Fork Mounts for Inverted Forks (pr)Fits: Mean Streak 1600

Upgrade TO L.E.D.REPLACE THE BULBS IN yOUR DRIVINg LIgHTS WITH OUR

3” L.E.D. UPgRADE LAMPS (P/N 5035)

LightingLighting

91

Great Driving Light Bar Options!FIND THESE, AND MORE LIgHTINg OPTIONS IN MULTI-FIT

mounting bracket P/n 4006 & P/n 4008

driving light bar

P/n 4001

constellation driving light bar

P/n 5001

91

REPLACEMENT BULBS (P/N 5035, 2229, 2214 & 4813)

CAN BE FOUND IN THE MULTI-FIT SECTION, PAgES 91 & 98-99

W W W . K U R y A K y N . C O M 8 6 6 . 2 7 7 . 9 5 9 864

KAWASAKI yR ISOBLACK

ISOISO

FLAME TRANSFORMER

Vulcan 2000 (All Models) ‘04-’10 6235 6345 6261 6231

Vulcan 1700 Voyager & Vaquero

‘09-’13 6235 6345 6261 6233

Vulcan 1700 (All Models) ‘09-’13 6235 6345 6261 6233

Vulcan 1600 (All Models) ‘03-’08 6235 6345 6261 6233

Vulcan 1500 (All Models) ALL 6235 6345 6261 6233

Mean Streak (All Models) ALL 6235 6345 6261 6231

Vulcan 800 (All Models) ‘95-’06 6235 6345 6261 6233

Vulcan 900 (All Models) ’06-’13 6235 6345 6261 6231

UNIVERSAL1” Handlebars ALL 6240 6340 6262 62327/8” Handlebars ALL 6241 6341 6263 N/A

ISO®-GRIPS u.s. Patent d411,432

Combining great style & comfort, these grips provide a soft, non-slip surface that dampens operating vibration. Recessed area between the ISO-Pads permit air movement for added comfort in hot weather.

ISO®-FLAME GRIPSFeaturing a unique flamed pattern in the soft & cushy raised rubber pads & finished off with a Maltese Cross emblazoned end cap & smooth trim ring for that additional bad attitude.

TRANSFORMER™ GRIPS u.s. Patent d631,725

Bright chrome grip bodies & sculpted end caps provide a solid feel while contrasting soft black rubber inlays absorb vibration. Interchangeable Widow, Zombie or Maltese Cross Emblems.note: transformertm griPs accePt all griP end accessories excePt accent rings. will only accePt smooth accent rings for transformer griPs (P/n 6364).

note: kuryakyn griPs are comPatible with aftermarket internal bar-style heated griPs. not comPatible with oem heated griPs where heat element is in the griP.

IS O ® BL A Ck IS O ®

T R A N SF OR MER ™IS O ®-F L A ME

Grip & HandlebarAccessories

7425 ’90-’08 Vulcan 500

All ZL600 Eliminator

’95-’06 Vulcan 800 (All Models)

’04-’10 Vulcan 2000 (All Models)

‘06-’13 Vulcan 900 (All Models)

7427 ’87-’08 Vulcan 1500

(Including Mean Streak)

’03-’08 Vulcan 1600

(Including Mean Streak)

wIDE STyLE LEVERS Wider & more comfortable than stock.

FIND THEM ALL IN MULTI-FIT

Handlebar ControlsHandlebar Controls

111

gRIP FITMENT

AUDIO

LIgHTINg

ACCESSORyMOUNTS

gAUgES &INSTRUMENTS

HANDLEBARCONTROLS

FOOTCONTROLS

COVERS,TRIMS &ACCENTS

LUggAgE

PERFORMANCE

THE SHOP

multi-fit

kawasaki > lighting & handlebar controls 65

kAwA

SAkI

accessories forkAwASAkI

BRAkE PEDAL COVER Rich chrome & black rubber finish encapsulates the existing pieces - a breeze to install!

Fits: All Vulcan 1500 & ‘03-’04 Vulcan 1600 Classic Models (‘05-’08 Vulcan 1600 use P/N 8857)

8850 Brake Pedal Cover (ea)

SHIFT & BRAkE PEDAL PAD COVERSA chrome & rubber clamshell cover that replaces the stock rubber pad on brake or heel shift pedals.

4029 Shift & Brake Pedal Cover (ea) Fits: ’86-’06 Vulcan 750 (Brake Pedal) ’03-’08 Vulcan 1600 (Heel Shift) ‘96-’08 Vulcan 1500 (Heel Shift) ‘06-’13 Vulcan 900 Classic (Heel Shift) ‘06-’13 Vulcan 900 Custom (Brake Pedal) Vulcan 1700 Models (Heel Shift) note: shift Position may need to be adjusted to accePt P/n 4029 heel shift. not for use with flamed floorboard covers (P/n 7025)

4045 Brake Pedal Cover (ea)

Fits: ‘02-’08 Mean Streak Models

8851

ROuND SHIFT PEG COVERSThis round rubber-lined chrome shift peg is now offered in two sizes to accommodate almost any round shift peg.

8851 Fits: Vulcan 1500 (Toe Only, Heel P/N 4029)Vulcan 1600 (Toe Only, Heel P/N 4029)Vulcan 2000 (Toe & Heel)Vulcan 900 Custom (Toe Only) Vulcan 900 Classic (Toe Only, Heel P/N 4029)Mean Streak (Toe Only)All Vulcan 1700, Voyager & Vaquero Models (Toe only, Heel P/N 4029 – See 4029 Note)

Universal: Most applications with round shift pegs approximately 2-9/16” long & 9/16” in diameter

ADjUSTABLE

Photo shown is rePresentative of Product listed

rendering shown

ADjuSTABLE CRuISE PEG MOuNTSfor floorboards Add the comfort of cruise pegs & keep that clean simple style with our Adjustable Cruise Peg Mounts. These little beauties bolt directly onto your floorboards & allow full adjustability for optional foot positions. Add any of Küryakyn's Male Mount Pegs & ride on!

4579 Fits: All Vulcan 1600/2000 Models, All '09-'13 Vulcan 1700 Models & 1700 Voyager & Vaquero Models & all Vulcan 900 Classic with stock floorboards (pr)

note: male mount Pegs sold seParately - starting on Pg 114.

FLOORBOARD COVERS Simple to install with a huge impact.

7022 Floorboard Covers for Kawasaki (pr) Fits: ’03-’08 Vulcan 1600, ’04-’10 Vulcan 2000, All '09-'13 Vulcan 1700 Models & '09-'13 1700 Voyager & Vaquero Models, Vulcan 900 Classic with OEM floorboards

Foot ControlsFoot Controls4029

Full Select ion of Cruise Pegs

Page 125

W W W . K U R y A K y N . C O M 8 6 6 . 2 7 7 . 9 5 9 866

MOUNTS DIRECTLy TO yOUR FLOORBOARDS!

Kuryakyn floorboards and foot pegs feature a two part mounting system allowing you to choose the right style for the right bike. Depending on the style you choose, each floorboard or foot peg will require either a SPLINED or TAPERED adapter (sold in pairs). Throughout the book, floorboards and foot pegs are identified by a symbol next to each style indicating whether it requires a splined or tapered adapter. Use the chart below to determine the right adapter for your application.

sold in PairsFOOTPEG ADAPTERS

DELUxE ISO®- BRAKE PEDAL PAD

Installs easily using hidden fasteners for a flawless appearance.

7589 Deluxe ISO® Brake Pedal Pad

note: requires drilling a 1/4” hold in brake Pad.

ISO®- BRAKE PEDAL PAD

Simply drill one hole in your existing rear brake pedal.

8857 ISO® -Brake Pedal Pad

8082 Replacement Rubber Pads (set/3)

note: requires ability to drill a 3/8” bolt hole in center of brake Pedal.

FLAMIN’ BRAKE PEDAL PAD

All rubber components physically retained - no more glued on pads.

7518 Flamin’ Brake Pedal Pad

note: requires ability to drill a 3/8" bolt hole in center of brake Pedal.

KAWASAKI yEAR front rear front rear

Vulcan 2000 (All Models) ‘04-'10 None 8831 None 8826

Vulcan 1700 Classic/LT/Vaquero '09-'13 None 8831 None 8826

Vulcan 1600 Classic ‘03-’08 None 8831 None 8826

Vulcan 1500 Classic ‘96-’08 None 8831 None 8826

Vulcan 1500 A/B ‘87-’99 8830 8831 8813 8826

Vulcan 1500 Drifter ‘99-’05 None 8831 None 8826

Vulcan 1500/1600 Mean Streak ‘02-’08 8830 8831 8813 8826

Vulcan 900 Classic ‘06-’13 None 8831 None 8826

Vulcan 900 Custom ‘06-’13 8830 8831 8813 8826

Vulcan 800 Classic ‘96-’05 8830 8831 8813 8826

Vulcan 800 Custom ‘95-’05 8830 8831 8813 8826

note: motorcycle sPecific adaPters only work with stock oem Peg mounts.

TAPERED SPLINED

8830

8831

8813

Select a Footpeg or Floorboard (Pg 114) and Mount it with an Adapter!

BRAkE PEDAL PADSReplace your old stock pads with glistening chrome and high-quality soft rubber.

Fits: ’96-’08 Vulcan 1500

’05-’08 Vulcan 1600 Classic

All Vulcan 2000

’06-’13 Vulcan 900 Classic

All ‘09-’13 Vulcan 1700

All ‘09-’13 1700 Voyager & Vaquero

AUDIO

LIgHTINg

ACCESSORyMOUNTS

gAUgES &INSTRUMENTS

HANDLEBARCONTROLS

FOOTCONTROLS

COVERS,TRIMS &ACCENTS

LUggAgE

PERFORMANCE

THE SHOP

multi-fit

kawasaki > foot controls 67

kAwA

SAkI

accessories forkAwASAkI

7589

7518

8857

REAR BRAkE COMPONENT DRESS-uP kITA replacement fluid reservoir cap in a dazzling chrome finish.

7822 Fits: '02-'08 Mean Streak, '03-'08 1600 Classic & Nomad, '11-'13 Vaquero 1700 (ea)

CLuTCH MASTER CyLINDER COVER

1743 Fits: All ’03-’08 Vulcan 1600 Models & Mean Streak (ea)

BRAkE MASTER CyLINDER COVER

7813 Fits: All ’04-’10 Vulcan 2000, all ‘06-’13 Vulcan 900, ‘03-’08 Vulcan 1600 Models & Mean Streak (ea)

9112

9108

9108

HANDLEBAR CONTROL COVERSu.s. Patent d556,645 & d575,203 may aPPly

Cover up unsightly housings & create a smooth, full-custom look with these clamshell-design chrome covers. They install easily & encapsulate the stock housings without interfering with control functions. sold as sets

9112 Fits: All Vulcan 2000, all Vulcan 900 & Mean Streak

9117 Fits: ‘99-’08 Vulcan 1500, all Vulcan 1600

CLuTCH PERCH COVER

9108 Fits: All Vulcan 900 & 2000 Models

MARquIS CHOkE kNOB COVER u.s. Patent 5,836,214 & d418,390

Installs easily without removing or modifying the stock choke knob.

Fits: Vulcan 800/1500/1600

2009 Marquis Choke Knob Cover (ea)

CALIPER COVERThis wicked looking cover installs in minutes. No tools required.

1294 Fits: All Vulcan 900/1500/1600

Covers, Trims & AccentsCovers, Trims & Accents

CLuTCH CABLE ADjuSTER COVERHide the crude, zinc-plated cable adjuster! Installs with easy-to-handle spring clips.

2017 Fits: All Kawasaki 800 Vulcan (ea)

2023 Replacement Spring Clips for P/N 2017 (pr)

2017

W W W . K U R y A K y N . C O M 8 6 6 . 2 7 7 . 9 5 9 868

1294

2009 1743

7813

7822

THE SCOOP AIR BOx COVERgain extreme visual speed & horsepower with this direct replacement cover! The long speed lines combined with the illusion of a ram air scoop will certainly intensify any ride. Installation is a snap.

Fits: All ’06-’13 Vulcan 900 Models

9961 The Scoop Air Box Cover (ea)

LICENSE HOLDERS

9253 Chrome Curved Horizontal Side Mount (ea)

9251 Chrome Curved Vertical Side Mount (ea)

9252 Chrome Lighted Curved Vertical Side Mount with Taillight (ea)

3125 gloss Black Curved Horizontal Side Mount (ea)

note: not intended for use with saddlebags. Please check local laws regarding side mount license Plates before ordering. mount clamPs required for installation - sold seParately.

L.E.D. CuRVED SIDE MOuNT LICENSE HOLDERS In the past, if you wanted a cool, custom side-mount license plate you paid through the nose. Our product brings the price down to reality without compromising style & function. Choose your plate then the correct Mounting Clamps. Sized to fit 4” x 7” plates only.

9253

NEW BRIgHTER, FULL LICENSE PLATE

ILLUMINATION!

INSTALLS IN MINUTES!

Taillight can be installed on top or bottom!

UNLIT / LIT

MOUNT CLAMPS

Required for installation of Küryakyn Side Mount License Holders.

3182 Chrome Mount Clamp (ea) Fits: All Kawasaki ‘07-’13 Vulcan 900 Models & All ‘04-’10 Vulcan 2000 Models

3122 gloss Black Mount Clamp (ea) Fits: All Kawasaki ‘06-’13 Vulcan 900 Models & All ‘04-’10 Vulcan 2000 Models

comPliant with fmvss#571.108 & marked sae dot l 11

3125

REAR CALIPER COVER Installation is simple & quick with high strength peel-&-stick adhesive.

Fits: All ’06-’13 Vulcan 900 Models, all ’03-’08 Vulcan 1600 Models, all ’04–’10 Vulcan 2000 Models, all Vulcan 1600 Mean Streak, all ’02–’08 Vulcan 1500, & all '09-'13 Vulcan 1700 Classic

1283 Rear Caliper Cover (ea)

Covers, Trims & Accents9252

21

AUDIO

LIgHTINg

ACCESSORyMOUNTS

gAUgES &INSTRUMENTS

HANDLEBARCONTROLS

FOOTCONTROLS

COVERS,TRIMS &ACCENTS

LUggAgE

PERFORMANCE

THE SHOP

multi-fit

kawasaki > covers, trims & accents 69

kAwA

SAkI

accessories forkAwASAkI

PRO-SERIES HyPERCHARGER™ STANDARD HyPERCHARGER™95-'04 Vulcan 1500 (Single Carb Model) 9404 9400

All Fuel Injected Vulcan 1500/1600,Including Mean Streak

9408 9405

95-'06 VN800 –––– 9410

PRO-R HyPERCHARGER™ CORSAIR™‘04-’10 Vulcan 2000 9465 9867

SELECT THE perfect AIR CLEANER FOR yOUR BIKE!

u.s. Patent 5,307,771 may aPPly

Don’t forget...

FIND IT IN MULTI-FIT, PAgE 155!

A Wild ThingsTM Fuel Injector Controller (P/N 9218) will help you fit it all together!

ALLEy CAT AIR CLEANERgreat looks and outstanding performance, the Alley Cat is sure to turn heads. Everything you need, all in one kit, to turn your bike into a high performance showpiece. Features include a lifetime high flow Kuryakyn designed K&N air filter element combined with a state of the art backing plate to extract the maximum potential from your engine.

9527 Fits: Vulcan 900 (All Models)

9528 Fits: Vulcan 1700, Voyager & Vaquero (All Models)

PerformancePerformance

note: these kits contain an all-chrome air cleaner, mounting kit, & jetting necessary for carburetor models for a comPlete, sanitary installation. for oPtimum Performance & driveability on fuel injected motorcycles, we strongly recommend use of the wild things fuel injection controller (P/n 9218 - Pg 155)

AIR CLEANERS

W W W . K U R y A K y N . C O M 8 6 6 . 2 7 7 . 9 5 9 870