Upload
miguel-andres-vanegas
View
553
Download
23
Embed Size (px)
DESCRIPTION
Kathrein antenna documentation
Citation preview
Dual-band PanelFrequency RangDual PolarizationHPBWFixed. Electr. DT
XXPol Panel 790960/17102170 65/60 12/14dBi 0/0TType No. 742226V01
R1R1 B1B1790960 17102170
Frequency range 790 862 MHz 824 894 MHz 880 960 MHz 1710 1880 MHz 1850 1990 MHz 1920 2170 MHzPolarization +45, 45 +45, 45 +45, 45 +45, 45 +45, 45 +45, 45Gain 2 x 11.1 dBi 2 x 11.4 dBi 2 x 11.8 dBi 2 x 12.8 dBi 2 x 13.3 dBi 2 x 13.6 dBiHorizontal Pattern:Half-power beam width 68 67 65 66 60 60Front-to-back ratio [dB](18030) [dB]
Copolar: > 23Total power: > 20
Copolar: > 23Total power: > 20
Copolar: > 25Total power: > 22
Copolar: > 25Total power: > 22
Copolar: > 25Total power: > 22
Copolar: > 25Total power: > 22
Cross polar ratioMaindirection 0Sector 60
Typically: 25 dB> 10 dB
Typically: 25 dB> 10 dB
Typically: 25 dB> 10 dB
Typically: 16 dB> 10 dB
Typically: 18 dB> 10 dB
Typically: 20 dB> 10 dB
Tracking, Avg. 1.0 dB 0.5 dBSquint 3.0 1.5Vertical Pattern:Half-power beam width 34 33 30 20 18 17.5Electrical tilt 0, xed 0, xed
Impedance 50 50 VSWR < 1.5 < 1.5Isolation: Intrasystem > 30 dB > 30 dBIsolation: Intersystem > 42 dB (790960 // 17102170 MHz)Intermodulation IM3 < 150 dBc (2 x 43 dBm carrier) < 150 dBc (2 x 43 dBm carrier)Max. power per input 250 W (at 50 C ambient temperature) 200 W (at 50 C ambient temperature)
742226V01 Page 1 of 2
936.
3967
/e
Sub
ject to
alter
ation
.
Mechanical specifi cations
Input 4 x 7-16 femaleConnector position* Bottom or topWind load Frontal: 200 N (at 150 km/h)
Lateral: 90 N (at 150 km/h)Rearside: 250 N (at 150 km/h)
Max. wind velocity 200 km/hHeight/width/depth 579 / 262 / 139 mmCategory ofmounting hardware M (Medium)Weight 7.5 kg / 9.5 kg (clamps incl.)Packing size 756 x 282 x 172 mmScope of supply Panel and 2 units of clamps
for 42 115 mm diameter* Inverted mounting:
Connector position top: Change drain hole screw.
17102170790960XX
656500
+45/45 Polarization790960
+45/45 Polarization17102170
10
3
0
65125
dB
10
3
0
33
Bd
120
Bd
10
3
0
60
10
3
0
18
Bd
Horizontal Pattern Vertical Pattern
Vertical PatternHorizontal Pattern
B1B1R1R1
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820www.kathrein.com
Any previous data sheet issues have now become invalid.
For downtilt mounting use the clamps for an appropriate mast diameter together with the downtilt kit.Wall mounting: No additional mounting kit needed.
Material: Refl ector screen: Tin-plated copper. Radiator: Tin-plated zinc.Flat fi berglass housing: The max. radome depth is only 69 mm. Fiber glass material guarantees optimum performance with regards to stability, stiffness, UV resistance and painting. The color of the radome is grey.All screws and nuts: Stainless steel.
Grounding: The metal parts of the antenna including the mounting kit and the inner conductors are DC grounded.
Page 2 of 2 742226V01
936.
3967
/e
Sub
ject to
alter
ation
.
AccessoriesGeneral Information
6472
9
670
630
579
Accessories
Type No. Description Remarks Weightapprox. Units per antenna
738546 1 clamp Mast: 42 115 mm diameter 1.1 kg 2 (included in the scope of supply)
731651 1 clamp Mast: 28 60 mm diameter 0.8 kg 2 (order separately if required)85010002 1 clamp Mast: 110 220 mm diameter 2.7 kg 2 (order separately if required)85010003 1 clamp Mast: 210 380 mm diameter 4.8 kg 2 (order separately if required)737978 1 downtilt kit Downtilt angle: 0 20 2.3 kg 1 (order separately if required)
KATHREIN-Werke KG Anton-Kathrein-Strae 1-3 P.O. Box 10 04 44 83004 ROSENHEIM GERMANY Phone +49 8031 184-0 Fax +49 8031 184-820www.kathrein.com
58
262
Bottom view
52 139
1710217045
79096045
17102170+45
790960+45
Layout of interface:
R1B1
Correlation TableFrequency range Array Connector
790 960 MHz R1 1217102170 MHz B1 34