CA

TA

LO

GU

E

croatian manufacturer of photovoltaic modules

S LARISd.o.o.

SOLAR ENERGY

SOLARIS d.o.o.SOLARIS d.o.o.

SOLARIS d.o.o. is a Croatian manufacturer of photovoltaic modules, present in Croatian and part of Eastern European markets with its hi-tech, high-performance reliable modules.SOLARIS d.o.o. foundation started with the production of photovoltaic modules in 1999. We are a partner of a reputable Italian manufacturer of photovoltaic cells, Helios Technology from Padova (Italy) and we are their exclusive representative and distributor in Croatia and part of Eastern Europe.Our production is based on world’s top standards and it satisfies all demands of today's market. Production technology of our PV modules is continually being improved and modernized, and the result of this is a large range of high-quality products that we offer, starting from PV modules (10-230Wp), charge regulators, low-consumption fluorescent lamps, inverters and batteries.To satisfy requests of today’s market Solaris started with the production of new generation of PV modules and introduced an automatic line for production of PV modules with the capacity of 50MW.

Photovoltaic modules SOLARIS are one of the most efficient in the market and are especially suitable for applications in stand –alone and grid-connected systems and for mobile units like campers or boats. Typical lifetime of modules is over 30 years long. Each cell and module is tested and its quality is controlled in all phases of production process. Installation of modules is very simple, practical and optimal for all configuration systems.

Frame design makes these modules reliable and easy to install. It is made of anodised aluminum with four holes, which makes it practical and compact. Frame dimensions are displayed in tables for different types of modules.

Cells are laminated between layers of ethylene vinyl acetate (EVA), tempered glass and white back-sheet, which give an ideal waterproof protection. Tempered glass is highly transparent and it optimally receives and diffuses the light. Modules are incorporated in aluminum frame and they acquire the necessary solidity, and are practical and easy to install.

Junction box (JB) with IP65 security level has the by-pass diodes and appropriate connections. It is equipped with two PG11 connections, which allow an easy installation. By-pass diodes integrated on the board allow a simple replacement in case of damage.

Aluminum frame

Production technology

Junction box

Photovoltaic modules

3

pro

ducts

Photovoltaic modules

4

pro

ducts

Type

Power Rating (PMAX)

Maximum Voltage (VMAX)

Maximum Current (IMAX)

Open-circuit Voltage (VOC)

Short-circuit Current (ISC)

Maximum System Voltage

Power Tolerance

Width alu. frame

Dimensions (mm)

Weight (kg)

HT-130

130 WP

17,0 V

7,7 A

21,8 V

8,5 A

HT-125

125 WP

16,8 V

7,45 A

21,6 V

8,4 A

HTD-120

120 WP

16,3 V

7,4 A

20 V

8,3 A

HTD-110

110 WP

16,2 V

6,8 A

20 V

7,9 A

HT-90

90 WP

18,5 V

4,9 A

22,5 V

5,3 A

HT-85

85 WP

18,4 V

4,6 A

22,3 V

5,0 A

HT-80

80 WP

18,3 V

4,4 A

22,2 V

4,8 A

HTD-75

75 WP

16,9

4,5 A

20,0 V

5,0 A

HTD-60

60 WP

16,3 V

3,7 A

20 V

3,95 A

HT-22

22 WP

18,5

1,22 A

22,5 V

1,35 A

Standard Test Conditions (STC: 1000 W/m2; 25°C, AM1.5)

1210x538

7,5

1082x538

6,9

676x666

5,2

650x292

2,6

1335x664

9,8

1494x664

11,1

750 V

± 5 %

34 mm

A charge regulator is able to control and monitor charging of one or more batteries connected to him. It is manufactured using solid-state technology (MOSFET), which doesn't contain internal relays. An internal microprocessor allows the regulator to control all the functions and a built in blocking diode prevents the loss of energy caused by the reverse current leakage. It is appropriate for different applications (for systems working on 12 or 24V with Pb-acid or Pb-gel batteries).

Charge regulators

5

pro

ducts

4

4

12V

No

No

No

No

No

No

No

No

No

Microlamp 4A Bravo 15C/V

15

15

12V / 24V

Yes (C, V)

No

No

Yes

No

No

Yes

No

No

Genius 15

15

15

12V / 24V

Yes

Yes (L)

No

Yes

Yes

Yes

Yes

Yes

Yes

Genius 15D

15

15

12V / 24V

Yes

Yes (L)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Genius 30

30

30

12V / 24V

Yes

Yes (L)

No

Yes

Yes

Yes

Yes

Yes

Yes

Genius 30D

30

30

12V / 24V

Yes

Yes (L)

Yes

Yes

Yes

Yes

Yes

Yes

Yes

Type

Max. current in input (A)

Max. current in output (A)

Nominal operating voltage (V)

Second module input

Night-time function

Integrated keyboard/display

Ready for Maestro display

Ready for Temperature Probe

Ready for Shunt

Jumper settable

RS232 COM port

Digital Output

HL Powertop series of batteries (maintenance free) have high performances and a long lifetime. Pb-gel batteries can be used in any position and have an average lifetime of 8 to 10 years and a cycle number that goes over 1000. They are especially suitable for modern photovoltaic installation systems.

The new fluorescent lamps thanks to their design, quality and performances represent the best that the market can offer today.

These highly efficient, compact lamps ensure an energy saving of 75% compared to the traditional lamps. Lamps have an E27 socket that fits the standard lamps. Low -consumption fluorescent lamps are able to tolerate wide voltage variations, even under critical environmental conditions, and have an average life- time of 8000 hours.

Batteries

Low-consumption fluorescent lamps

Type

Nominal Power

Nominal Current (12/24 VDC)

Nominal Voltage DC ± 20%

Eq. incandescent lamps

Dimensions

Bulb

Socket

W

A

V

W

mm

AM7/12

7

0,6

12

40

125x61

spiral

E27

AM11/12

11

0,85

12

60

130x61

spiral

E27

AM13/24

13

0,55

24

70

130x61

2U

E27

AM15/12

15

1,05

12

75

140x61

spiral

E27

AIRAM15

15

0,86/0,48

12/24

80

151x50

3U

E27

AIRAM20

20

1,07/0,56

12/24

100

135x62

spiral

E27

LH12

12

1,00/0,40

12/24

60

1U

LH15

15

1,33/0,55

12/24

75

1U

6

pro

ducts

2,7

15

24,6

40,3

49,6

76,5

Weightkg

151 x 65 x 101

198 x 166 x 174

351 x 167 x 176

407 x 174 x 240

484 x 171 x 241

522 x 242 x 222

Dimensions (mm)

7,2 Ah

40 Ah

65 Ah

110 Ah

150 Ah

210 Ah

20h RateCapacity

-------

46 Ah

75 Ah

125 Ah

170 Ah

240 Ah

100h RateCapacity

12 V

12 V

12 V

12 V

12 V

12 V

NominalVoltage

HGL 7,2

HL 40

HL 65

HL 110

HL 150

HL 210

Type

345x71x42

KUBIK 500 and KUBIK 1200 are inverters designed for stand-alone applications in areas where the traditional 230 VAC power grid is not available.

These DC-AC power inverters convert a 12 or 24 VDC input voltage supplied by the batteries, into a 230 VAC output at 50 or 60 HZ. Inverters have a “Master-Slave” connection thanks to which, connecting more inverters in parallel, it is possible to build-up systems and increase total available power. Maximum total power output can be up to 3000VA with KUBIK 500 systems, and up to 7200VA with KUBIK 1200.

Functions of inverter are monitored by a powerful processor, which can activate safeguard functions.

Sine wave inverters

7

pro

ducts

KUBIK 500-12

12V

10 – 15 VDC

40 mA

83%

KUBIK 500-24

24V

from 10 to 230 VAC ± 2%

Pure sine wave

50 or 60 Hz ± 0,5%

35 mA

85%

200 x 185 x 155 mm

KUBIK 1200-24

24V

500 W

94%

4,6 kg

IP 20

1200 W

35 mA

80%

90%

5,6 kg

IP 20

20 – 30 VDC

Type

Nominal input voltage

Nominal selectable output voltage

Wave form at the output

Selectable nominal output frequency

Nominal power output

Admissible operating voltage range

Average consumption in 'auto-off' operating mode

Conversion efficiency at maximum power output

Conversion efficiency at 300 W power output

Dimensions

Weight

Protection degree of the inverter

8

sta

nd a

lone s

yste

ms

MINI KIT SK-22Yes,

total 6h No No

Device at 12 VDC (summer)Type

Lamps TV Fridge

Possibleconsumption

(Wh/dan)

80

MINI KIT SK-40Yes,

total 10h Yes, 3h No

PV module 40W

Charge regulator Microlamp 4A

Lamps AM 7W

Lamps AM 11W

Lamps AM 15W

Batteryr HL 65

1

1

2

1

1

1

150

Configuration

PV module 22W

Charge regulator Microlamp 4A

Lamps AM 7W

Lamps AM 11W

Batteryr HL 40

pc.

1

1

1

1

1

Minikits

Minikits are small photovoltaic systems ideal for holiday houses, garages, campers and similar applications.Minikit works at 12VDC and consists of PV modules, charge regulator, battery and low-consumption fluorescent lamps that work on 12VDC. They are designed to be used in summer periods.

9

sta

nd a

lone s

yste

ms

KIT SK-80

KIT SK-160

KIT SK-220

KIT SK-440

Yes,total 5h

Yes,total 6h

Yes,total 3h

Yes,total 5h

Yes,2h

Yes,5h

Yes,2h

Yes,5h

Yes, consumption 440 Wh/day

PV module 40W

Charge regulator Bravo 15A

Inverter Kubik 500VA / 12V

Battery HL 150

PV module 220W

Charge regulator Genius 30A/24V

Inverter Kubik 1200VA / 24V

Battery HL 210

PV module 220W

Charge regulator Genius 30A/24V

Inverter Kubik 1200VA / 24V

Battery HL 150

2

1

1

1

4

1

1

2

1

1

1

2

2

1

1

4

300

600

850

1700

Device at 230 VAC (summer) Type

Lamps TV Fridge

Possibleconsumption

(Wh/day)Configuration

PV module 40W

Charge regulator Bravo 15A

Inverter Kubik 500VA / 12V

Battery HL 210

pc.

Yes,week-end

Yes, consumption 840 Wh/day

Solar kits

Solaris has created special solar kits, which offer a power supply of 230VAC in places where the power grid is not available. Installing kits, which range from SK-80 to SK-440, it is now possible to have light, connect a TV and a freezer in all areas.Solar kits are suitable for upgrading, adding PV modules, batteries or inverters. Connecting more than one inverter KUBIK (up to max. 6 units) in parallel, it is possible to supply powerful devices without changing the inverter. Using kits only during weekends and adding a battery it is possible to attach a freezer (weekend version). Combining the system with the automatic battery charger attached to auxiliary generator it is possible to get more security of the system in case of cloudy weather. Solar kits are designed to be used in summer periods.

Yes,week-end

Solaris' experts in collaboration with authorized installers give consulting services regarding grid systems and design systems according to average consumption, requirements, available area and capacity of installation. According to the average power consumption of a family, dimensions of grid connected photovoltaic systems should be from 1-5 kW.

Additionally Solaris offers:- PV modules with fast connectors- modular support structures for installations of flat and tilted surfaces- inverters and accessories with related conformity certifications

.

Grid connected photovoltaic systems

10

gri

d c

onnecte

d s

yste

ms / s

pecia

l pro

ducts

Kopar, Slovenija, 20 kW, 2007.

Special products

Transparent PV modules

Transparent PV module is a part of our wide range of products. Along with it's primary purpose - production of ecological electric energy, it is used for decorating buildings, parking places etc.

Advantages of these types of modules:

- energy saving- high performances- modern and ecological building design

PV modules for special purpose

Along with standard types of modules, Solaris also produces modules for special purposes. We are cooperating with companies from different fields of business that use our special modules f o r s o l a r s h i p , meteorological stations on the sea and for n u m e r o u s o t h e r functions.

Inverters ‘Fronius’ and support structures ‘Schüco’

Grid inverters Fronius have three main qualities: simple application, maximal efficiency and reliability. FRONIUS IG. High power supply and maximal reliability in a compact edition. Designed for systems of all dimensions from 1 kW to more MW, parallel connected, and with all types of modules.

Support structures 'Schüco' made of inox offer an easy, fast and safe installation of PV modules on flat or tilted surfaces.

gri

d c

onnecte

d s

yste

ms

Type

Power rating (PMAX)

Maximum voltage (VMAX)

Maximum current (IMAX)

Open-circuit voltage (VOC)

Short-circuit current (ISC)

Maximum system voltage

Power tolerance

Cell type

Dimensions (mm)

Weight (kg)

Connections prepare

HT-200P

200 WP

28,9 A

6,9 A

36,4 V

7,7 A

HT-210P

210 WP

29,7 V

7,1 A

36,6 V

7,8 A

715 V

± 3 %

HT-220P

220 WP

30,2 V

7,3 A

36,9 V

8,0 A

1679 x 994 x 42 mm

22 kg

1x2 m (4mm ) or connectors

HT-210

210 WP

29,6 V

7,1 A

36,2 V

8,1 A

HT-220

220 WP

30,0 V

7,3 A

36,6 V

8,2 A

715 V

± 3 %

Power systems

(W)

1760

2200

3080

4840

5940

35200

43560

Nr. PV modules

8

10

14

22

27

160

198

Module power (W)

220

220

220

220

220

220

220

InverterFronius

IG15

IG20

IG30

IG40

IG60HV

IG400

IG500

Area on flat surfaces

(m²)

cca. 33

cca. 41

cca. 57

cca. 90

cca. 111

cca. 656

cca. 812

Total weight

modules (kg)

176

220

308

484

594

3520

4356

Possible gain at

year (MWh)*

2,10

2,63

3,68

5,78

7,09

42,01

51,99

PV Modules

* with medium insolation 4,36 kWh/day

Standard Test Conditions (STC: 1000 W/m2; 25°C, AM1.5)

Area on tilted surfaces

(m²)

cca. 14

cca. 17

cca. 24

cca. 37

cca. 46

cca. 272

cca. 337

2

Monocrystalline siliconMulticrystalline silicon

Solaris d.o.o.Rijeke Raše 7, Po. BOX 41, 52466 Novigrad / Cittanova, Croatia

tel. +385 (0)52-758 330; fax. +385 (0)52-726 030E-mail: info@solaris-novigrad.hr / www.solaris-novigrad.hr

Installater / partner: