Katalog 1 EN - Hansa-Flex · Catalogue 1 Edition: 02/2008 3 124 Hose protection Note All the information in this catalogue is based on the standards applicable at the time of publication

Edition: 02/2008 Catalogue 1

3

123

Hose protection

Hose protection

Edition: 02/2008Catalogue 1

3

124

Hose protection Note

All the information in this catalogue is based on the standards applicable at the time of publication and the regu-

lations of the employers‘ liability insurance associations. Product safety can only be guaranteed if our assembly

instructions are followed correctly. Failure to follow any of these instructions may affect the operational safety

of the product and invalidate our warranty. Our warranty in any event only covers HANSA-FLEX products. Our

products are constantly being updated, technical modifications are possible.

While we take every care in editing and checking the catalogue we cannot rule out possible errors or omissions

and accept no liability for the information it contains.

® 2008 HANSA-FLEX Hydraulik GmbH – www.hansa-flex.com


3

125

Hose protection Antikink protection

GKS Rubber antikink protection Application: High pressure cleaners

Min. temperature: -50 °C Max. temperature: +135 °C Material: Rubber

Item description: prevents the hose from kinking behind the

mount

Designation

DN

mm

Inch

Internwal Ø

mm

Length

mm

Colour

GKS 06 6 1/4“ 14,3 120 black

GKS 08 8 5/16“ 17,0 148 black

GKS 08 BLAU 8 5/16“ 17,0 148 blue

GKS 08 GELB 8 5/16“ 17,0 148 yellow

GKS 08 GRAU 8 5/16“ 17,0 148 grey

GKS 08 ORANGE 8 5/16“ 17,0 148 orange

GKS 08 ROT 8 5/16“ 17,0 148 red

GKS 10 10 3/8“ 19,5 148 black

GKS 10 BLAU 10 3/8“ 19,5 148 blue

GKS 10 GELB 10 3/8“ 19,5 148 yellow

GKS 10 GRAU 10 3/8“ 19,5 148 grey

GKS 10 ORANGE 10 3/8“ 19,5 148 orange

GKS 10 ROT 10 3/8“ 19,5 148 red

GKS 13 BLAU 12 1/2“ 23,9 148 blue

GKS 13 GRAU 12 1/2“ 23,9 148 grey


3

126


PKF Antikink protection spring Material: Spring steel

Surface protection: electro galvanised, yellow chromized Item description: Spring steel spiral with narrow and wide coil

spacing is pushed over the press mount and prevents the hose

from kinking at the mount

Designation

Internal Ø

mm

Length

mm

Wire Ø

mm

PKF 17 18,0 210 2,5

PKF 22 22,3 210 2,5

PKF 23 23,0 210 2,5

PKF 26 25,7 210 3,0

PKF 29 29,3 230 3,5

PKF 34 34,0 250 3,5

PKF 42 42,0 280 3,5

PKF 52 53,1 360 4,0


3

127


RKS Pipe antikink protection Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: the moulded steel pipe is pressed onto the

mount and prevents the hose from kinking behind the mount

Designation

DN

mm

Internal Ø

mm

External Ø

mm

Length

mm

RKS 20 19 38,5 42,0 140

RKS 25 25 44,0 48,0 160

RKS 32 31 56,5 60,0 190

RKS 40 38 64,5 70,0 205


3

128

Hose protection Heat protection

FBS Silicate fabric heat protection hose Application: foundries, steel works, glassworks, shipyards etc.

Colour: bluish

Min. temperature: -10 °C Max. temperature: +750 °C Item description: abrasion resistant and tear proof insulating

fabric, asbestos free, loss on ignition approx. 2 %, good insula-

ting properties due to low heat storage, excellent resistance to

liquid metals, fl ying sparks, dross, resistant against oils, greases

and solvents

Designation

Internal Ø

mm

FBS 014 14

FBS 016 16

FBS 018 18

FBS 020 20

FBS 022 22

FBS 024 24

FBS 025 25

FBS 026 26

FBS 028 28

FBS 030 30

FBS 032 32

FBS 035 35

FBS 038 38

FBS 040 40

FBS 042 42

FBS 045 45

FBS 047 47

FBS 050 50

FBS 055 55

FBS 056 56

FBS 060 60

FBS 068 70

FBS 080 80


3

129


FBSB Silicate fabric heat protection hose with silicon sheathing Application: foundries, steel works, glassworks, shipyards etc.

Colour: grey

Min. temperature: -10 °C Max. temperature: +250 °C Item description: as for FBS, but with additional silicone cover,

good light, UV and oxidisation resistance, weather proof, good

dirt and oil repellent eff ect, good resistance against acids and

alkalis. Provides outstanding protection against liquid metals

and metal sprays

Note: GL approval 40 246-01 HH

Designation

Internal Ø

mm

Wall thickness

mm

External Ø

mm

FBSB 010 10 3 16

FBSB 015 15 3 21

FBSB 020 20 3 26

FBSB 022 22 3 28

FBSB 025 25 3 31

FBSB 028 28 3 34

FBSB 030 30 3 36

FBSB 032 32 3 38

FBSB 035 35 3 41

FBSB 040 40 3 46

FBSB 050 50 3 56

FBSB 060 60 3 66


3

130


FBSS Glass fi bre braiding heat protection hose with silicon sheathing Application: foundries, steel works, glassworks, shipyards etc.

Colour: brown

Min. temperature: -60 °C Max. temperature: +250 °C Item description: provides outstanding protection against

liquid metals and metal sprays

Good resistance to UV radiation, ozone, oxygen and thermal

shocks, excellent aging resistance in hot environments

Designation

Internal Ø

mm

Wall thickness

mm

External Ø

mm

FBSS 015 15 0,6 16,2

FBSS 018 18 0,7 18,4

FBSS 020 20 0,7 21,4

FBSS 025 25 0,7 26,4

FBSS 030 30 0,7 31,4

FBSS 035 35 0,7 36,4

FBSS 040 40 0,8 41,6

FBSS 042 42 0,8 43,6

FBSS 045 45 0,8 46,6

FBSS 050 50 0,8 51,6


3

131

Hose protection Abrasion protection

SSK Plastic abrasion protection Application: Hose lines that are subjected to a shearing load

during movement

Colour: black

Max. temperature: +120 °C Material: Polyamide 6

Item description: Flat plastic profi le protective helix protects

the hose against external abrasion.

also suitable for subsequent installation and for bundling hose

lines

Designation

Internal Ø

mm

External Ø

mm

SSK 07 7,5 10

SSK 09 9,5 12

SSK 13 13 16

SSK 16 15 18

SSK 20 20 24

SSK 25 25 29

SSK 30 30 35,4


3

132


SSK C Plastic abrasion protection Application: Hose lines that are subjected to a shearing load

during movement

Colour: black

Min. temperature: -10 °C Max. temperature: +60 °C Material: Hard PVC

Item description: Flat plastic profi le protective helix protects

the hose against external abrasion. Also suitable for

subsequent installation and for bundling hose lines

Designation

Internal Ø

mm

Wall thickness

mm

External Ø

mm

SSK C 07 7,0 - -

SSK C 09 9,5 1,40 12,7

SSK C 13 13,0 1,20 15,4

SSK C 16 16,0 1,20 18,4

SSK C 23 20,0 1,80 23,6

SSK C 30 27,0 1,90 30,8

SSK C 40 35,5 2,20 40,0

SSK C 50 43,5 2,30 48,0

SSK C 60 64,0 4,25 72,5

SSK C 80 81,0 5,00 91,0


3

133


SSF Flat abrasion protection Application: Hose lines that are subjected to a shearing load

during movement

Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: Flat spring steel band protective helix

protects the hose against external abrasion.

Designation

Internal Ø

mm

Steel band

mm

SSF 13-1 13 7 x 1,0

SSF 15-1 15 7 x 0,8

SSF 17-1 17 7 x 0,8

SSF 19-1 19 7 x 0,8

SSF 21-1 21 7 x 0,8

SSF 23-1 23 7 x 0,8

SSF 26-1 26 7 x 0,8

SSF 29-1 29 7 x 0,8

SSF 33-1 34 7 x 0,8

SSF 41-1 41 7 x 0,8

SSF 48-1 48 10 x 1,0

SSF 54-1 54 10 x 1,0


3

134


SSR Round abrasion protection Application: Hose lines that are subjected to a shearing load

during movement

Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: Round spring steel wire protective helix,

small coil spacing provides maximum coverage.

Designation

Internal Ø

mm

External Ø

mm

Wire Ø

mm

SSR 14-2 14 16 2

SSR 18-2 18 22 2

SSR 20-2 20 24 2

SSR 23-2 23 27 2

SSR 25-2 25 29 2

SSR 27-2 27 31 2

SSR 27-2,5 27 32 2,5

SSR 30-2 30 34 2

SSR 34-3 34 40 3

SSR 41-3 41 47 3

SSR 48-3 48 54 3

SSR 51-3 51 57 3

SSR 52-3 52 58 3

SSR 54-3 54 60 3

SSR 56-3 56 62 3

SSR 68-3 68 74 3

SSR 73-3 73 79 3


3

135


SSR E Round abrasion protection Application: Hose lines that are subjected to a shearing load

during movement

Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: Round spring steel wire protective helix,

small coil spacing provides maximum coverage.

The narrow winding distance provides excellent hose coverage.

Designation

Internal Ø

mm

External Ø

mm

Wire Ø

mm

SSR 20-2 E 20 24 2

SSR 26-2 E 26 30 2

SSR 28-2 E 28 32 2


3

136

Designation

Internal Ø

mm

External Ø

mm

Minimum bending radius

mm

SGF 06 6 8,0 20

SGF 07 7 9,0 20

SGF 08 8 10,0 25

SGF 10 10 13,0 25

SGF 13 13 16,0 35

SGF 15 15 18,0 40

SGF 18 18 21,3 45

SGF 19 19 23,0 45

SGF 20 20 24,0 50

SGF 22 23 27,0 55

SGF 24 25 29,0 60

SGF 26 26 30,0 60

SGF 28 28 32,0 63

SGF 30 30 34,0 65

SGF 32 32 36,0 75

SGF 35 35 39,5 80

SGF 38 38 43,5 85

SGF 42 42 47,5 88

SGF 44 44 49,5 90

SGF 45 45 50,5 90

SGF 48 48 53,5 95

SGF 50 50 56,0 115

SGF 52 52 58,0 115

SGF 55 55 61,0 115

SGF 58 58 64,0 117

SGF 60 60 66,0 120

SGF 62 62 69,0 125

SGF 65 65 72,0 130

SGF 68 68 74,0 140

SGF 70 70 77,0 150

SGF 72 72 79,0 160

SGF 76 76 83,0 166

SGF 80 80 87,0 170


SGF Protective braiding Application: foundries, steel works, glassworks, shipyards etc.

Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: Zinc plated steel wire protective braiding


3

137


SGF Protective braiding Application: foundries, steel works, glassworks, shipyards etc.

Material: Steel

Surface protection: electro galvanised, yellow chromized Item description: Zinc plated steel wire protective braiding

Designation

Internal Ø

mm

External Ø

mm

Minimum bending radius

mm

SGF 84 84 92,0 180

SGF 90 90 100,0 190

SGF 94 94 104,0 200


3

138

Hose protection Shrink hoses

SST Shrink hose Colour: black

Min. temperature: -55 °C Max. temperature: +135 °C Material: networked modifi ed polyolefi n

Item description: Universal fl ame retardant shrink hose.

Flame retardant in accordance with MVSS and UL 224.

Shrinking rate 2:1, shrinking temperature above 90 °C up to

200 °C.

Designation

Internal Ø

mm

Wall thickness

mm

Min. shrinkage Ø

mm

SST 25 25,4 0,9 12,7

SST 38 38,0 1,0 19,0

SST 50 51,0 1,1 25,4


3

139

Hose protection Shrink hoses

SSTK Shrink hose with adhesive coating Colour: black

Min. temperature: -55 °C Max. temperature: +110 °C Material: networked modifi ed polyolefi n

Item description: Universal fl ame retardant shrink hose with

internal adhesive coating.

Provides additional protection against climatic infl uences (e.g.

swage fi ttings for use near sea water) or used for cable bundling.

Flame retardant and not self-extinguishing, complies with DIN

VDE 0278.

Shrinking rate up to 3.5:1, shrinking temperature min. 110 °C,

adhesive is used to create an additional connection to the hose.

Designation

Internal Ø

mm

Wall thickness

mm

Min. shrinkage Ø

mm

SSTK 2006 20 2,0 6

SSTK 3010 30 2,0 10

SSTK 4012 40 2,0 12

SSTK 5018 54 2,0 18


3

140

Hose protection Hose bundling

TGF Band Hose bundling Application: for bundling multiple hose lines

Colour: black

Item description: High tensile nylon fabric retaining band with

Velcro fastener and mounting loop.

Designation

Bundle Ø

mm

Circumference

mm

TGF BAND 102 31-33 102

TGF BAND 152 47-49 152

TGF BAND 203 63-67 203

TGF BAND 254 79-83 254

TGF BAND 305 95-99 305

TGF BAND 356 111-115 356

TGF BAND 406 127-131 406

TGF BAND 457 144-148 457

TGF BAND 508 160-164 508

TGF BAND 560 176-180 560

TGF BAND 610 192-196 610

TGF BAND 660 208-212 660

Documents

Katalog 1 EN - Hansa-Flex · Catalogue 1 Edition: 02/2008 3 124 Hose protection Note All the information in this catalogue is based on the standards applicable at the time of publication