KANNAN.P

B. E in Mechanical Engineering.

Mobile: +91 9176086032 ~ E-Mail: ppkannan16@gmail.com

To employ my knowledge to develop my skills and to attain a challenging position in the field of Operations and Performance Improvement with an organisation of high repute in Power Generation Industry.

Career Abstract

A dynamic professional with 8+ year’s rich experience in Operations & Maintenance of

Coal based power plant.

Expertise in all kinds of plant Operations, Commissioning activities.

Maintenance & Operation Experience in various types of Power plant and all process in-

dustries.

Perform Condition monitoring for all rotating equipment and make analysing reports.

Monitoring the Boiler, TG & BOP log books.

Sound knowledge on performance and optimisation of Air Compressors.

Expertise in Boiler Erection and commissioning.

Preparation of SOP for all the equipment and performance methodologies.

Expertise in over hauling of Bowl Mill, Pumps, Compressors and Fans.

Coordinated and involved in Performance Guaranteed Test for Boiler and Turbine con-

ducted by BHEL.

Erection and Commissioning of Motors, Pumps, compressors, Condenser, Fans and

various other utilities.

Monitoring of performance parameters, fuel analysis and water chemistry through SAP

module.

Expertise in managing maintenance operations for reducing breakdown / downtime & en-

hancing operational effectiveness of equipment.

Career Scan

Experience:-

Presently working in-Organization : OPG Thermal Power Plant (1 x 180 MW, 3 x 80 MW)Designation : Operations & Maintenance Engineer.

Duration : Dec 2010 to till the date

About plant:

3 X 80 MW, 1 X 160 MW Independent Power Plant Subcritical with high pressure, Natural

circulation boiler, Bi- drum, double casing, and Air cooled Condensing Turbine (MAX DNA

DCS)

Boiler : Ansaldo Caldaie Boiler and ISGEC Boiler

Type : Pulverised Fired

Design : 93ksc, 540 C, 320 tph for 80 MW, 140 ksc, 540 C and 520 tph for 180 MW

Turbine : BHEL Steam Turbine (80 MW) and Skoda Turbine (180 MW)

Capacity : 3 X 80MW Single Cylinder and 1 X 180 MW

Condenser : Air Cooled surface condenser

Organization: LANCO TANJORE POWER LTD (APRIL 2007- Dec-2010). Department: Operation and Maintenance

Job Profile: Maintenance Engineer

Responsible for the operations of

1 X 70 MW GE GT (6FA with DLN-2 and Mark V)

1 X 50 MW Siemens Condensing Steam Turbines with BHEL generator

170 TPH HRSG from THERMAX, 110 KV switch yard.

Job Profile

Sound knowledge on ANSALDO Boilers (320 tph), ISGEC Boiler (520 tph) and BHEL

Turbine (80 MW) and Skoda Turbine (180 MW).

Smooth operation of Boiler, Turbine and their auxiliaries by maintaining operational

parameters.

Interacting with clients and vendor to identify and implement latest techniques for

increasing efficiency of the plant.

Involving Mechanical Preventive maintenance of Turbine and their Auxiliaries.

Having knowledge in both water cooled and Air cooled condensers,

Coal handling system having stacker reclaiming system.

Coordination with Maintenance Team for Predictive Maintenance of Equipments.

Monitor field operations and DCS operations.

Follow of erection and commissioning activities.

Commissioning of boiler Auxiliaries and turbine and its auxiliaries

Operation, Start up (Cold and Hot) and Shut down of Boiler and Turbine through DC.

Monitoring parameters of turbine and generator through PLC, vibration parameters

through Bentley Nevada.

Issuing permits to respective departments for Preventive Maintenance.

Verifying & certifying Sub Contractor RA bills and Material Reconciliation for all

Erection activities.

Responsible for the implementation of safety standards at the project site ensuring

that all relevant norms are employed effectively.

In depth knowledge of Fabrication & Erection drawings, P&ID’s, Isometric Drawings

and reviews of engineering drawings.

Knowledge on inspection methods like RT, UT.

Familiar with Welding technology, welding defects and possible remedy.

Having 3 Year Experience in SAP implementation, Shutdown Maintenance.

Look for Opportunities to build a case so that the repeated complaints / under

performances are solved by O&M team through Process Improvements / Engineering

Modifications.

Professional Qualification

Completed B.E., in Mechanical Engineering under Anna University in 2011 with 65 %

Highlights & Academic Achievement

Carried out Design and optimization of Gas supply pipelines at Integral Coach Factory.

Attended training program on occupational health & Safety under Passport scheme.

IT Skills Expert in MS Office and Internet Applications.

Additional Skills Auto CAD.

Language Proficiency English - Read, Write and Speak

Hindi - Speak

Tamil - Read, Write and Speak

Passport Details Passport No - G9558802

Place of Issue - Trichy, Tamilnadu.

Date of Issue - 21-06-2008

Date of Expiry - 20-06-2018

Personal Dossier

Name : Kannan.P

Date of Birth : 16 May 1985

Permanent Address : P.Kannan175/Z2 New Colony.

Thuraimangalam,

Perambalur-621220

Sex : Male

Father name : R.Perumal

Work Experience : 8+ Year

Current CTC : 7 Lakhs / Year

Expected CTC : 15 Lakhs / Year

Nationality : Indian

Marital status : Married

E-mail ID : ppkannan16@gmail.com

DECLARATION

I hereby solemnly declared that the information given above is true to best of my

knowledge and belief and I understand that I liable to disqualified if any of this is found to be

incorrect or incomplete and not be entitled to any claim arising thereof.

K

annan