KALOS ONE BODY TWO SOULS - Highway Components · KALOS Post top String Arm Arm 4 arms Pag. 12 4 arms Pag. 22 4 arms Pag. 14 2 arms Pag. 8 Pag. 20 2 arms Pag. 10 4 arms Pag. 16. 2

ONE BODY TWO SOULS

KALOS

Proud UK Partners

with

UP

DOwn

KALOS

Post top

String Arm

Arm

4 arms

Pag. 12

4 arms

Pag. 22

4 arms

Pag. 14

2 arms

Pag. 8

4 arms

Pag. 20

2 arms

Pag. 10

4 arms

Pag. 16

2 32 3

KALOS is a fixture for the lighting of urbanand residential areas, specifically studied tobe equipped with LEDs as sole light source.The fitting carries out the double function of post-top lighting fixture and of sospende fix-ture for installation on arms and string and, thanks to this feature, it’s been patented.The post top version is available with 2 or 4side arms, the suspended one is availableonly with 4 arms.The post top version with 4 side arms canprovide a more classical look if equippedwith the decorative upper cover.Three optics are available: rotosymmetrical,street optics, street optics front & back.The LED equipment varies from 10 to 40,with color temperature 4000K. The colortemperature 3000K is available on demand.

Protection degree IP 66IK08

Isolation class II Quality marks

Standard color: dark grey sablé100noir.

Available versions (amount of LEDs)

10 - 20 - 30 - 40 - 10+10 - 10+20 - 10+30 - 20+20

Nominal Power 20W - 40W - 60W - 80W - 40W - 60W - 80W - 80W

Max. Weight 8 Kg

Fastening system Post top Ø 60 mm. Suspended on Ø 48-60 mm arms.

It is possible to replace the LED-module of the fitting at the end of its lifetime, with a new one technologically up to date.

CRI (colour rendering index): ≥70

Protection against over-voltages up to 10Kv. The equipment with a TMOV (thermal protected oxide varistor) represents a suitable protection against any distrurb due to atmospheric agents or to unbalances of the charge.

Fitting exempt from photobiological risk (EXEMPT GROUP)according to the norms EN 62471:2008 and the following IEC/TR 62471:2009.

Medium life of Led at Ta=25°C >100.000h (B20L70).B20L70: 80% of Leds keeps 70% of initial flux after 100.000 h.

General features

Kalos Patent Pending

KALOS

-90 90

180

Imax=653 cd/klm

Lamp _ LED Me n H H1 D I/H Lm (cd/m2) U0 UL Ti Sr Emed Emed E min W

UNI 11248 Me3b 1 0,4 0,6 ≤ 15% ≥ 0,5 S1 15 5

80W QE 2 5,5 5,8 21 3,8 0,3 0,42 0,69 21,56 0,91 4 4 2,6 88

125W QE 2 5,5 5,8 21 3,8 0,55 0,45 0,75 25,84 0,92 7 7 5 138

70W SE 2 5,5 5,8 21 3,8 0,44 0,42 0,69 23,3 0,91 6 6 4 83

70W ME 2 5,5 5,8 21 3,8 0,49 0,42 0,69 23,78 0,91 6 6 4 91

KALOS 10+20 LED 2 5,5 6,1 21 3,8 1 0,4 0,71 7,12 0,8 7 15 7 60

Energy saving 10+20 LED 70W VS 2x125w QE 276w -75%

Lifetime LED 50.000h VS QE 16.000 + 212%

6

6

4

4

Energy Saving 75%

Light Pollution 0%

Life time > 50.000 h.

On-off: immediately

warranty: 5 years

50%

50% 100%

Fivep Lite technical dep.t, in cooperation with Optics Lite, a design which is developing optical systems for industrial and lighting ap-plications, has studied a “front & back” pat-ent street optic for KALOS, this is achieving a photometric performance, which can light in two directions, both towards the street and cycling paths or pedestrian areas on the opposite side.This solution is suitable to replace the exist-ing posts systems using two different light sources with a pole installing one KALOS only, which can perform this double lighting function, having an excellent energy saving and reducing the maintenance costs

The nominal flux depends on the type of LEDs in use and it may be modified accord-ing to the quick and continuous development of the LED technology.For any further information concerning the luminous efficiency of the LEDs, please refer to our website.

KALOS

4 5

Lm = Flux lm

n = N° lane

La =

Street width

H = Height

H1=

Height of the lighting source

D =

Interdistance

K = D/H

La.z = Area width

Lu.z =

Area length

Emed =

Average illumination

Emin =

Minimum illumination

Uo(Em) = General uniformity

Lm[Cd/m2] = Average luminance

U0(Lm) =

General uniformity

Ul(Lm) = Lengthwise uniformity

Ti% =

Dazzling index

Sr = Contiguity ratio

STR. =

Street Optic

6 7

KALOSRotosymmetrical & Street Optics

180

-90 90

180

Imax=653 cd/klm

-90 90

180

Imax=414 cd/klm

H H1 E Medio U0 W

80W QE 4 4,6 6 0,28 88

125W QE 4 4,6 10 0,28 138

100W SE 4 4,6 17 0,28 115

KALOS 10 LED ROT 4 4,6 6 0.34 24

KALOS 20 LED ROT 4 4,6 12 0.34 45

Energy saving 10 LED 24W vs QE 80W 88W -73%


H

H1

D

I/H

La

Emed

Emin

w

STR

ROT

H H1 D I/H La Emed Emin W

UNI 11248 (S2) 10 3

KALOS 10 LED STR 4 4,6 22,5 5,6 3 10 3 24

CERVIA 125W QE 4 4,6 22,5 5,6 3 8 3 138


Pole height


Interdistance

Interdistance/height ratio

Street width



Totale absorbed

Street Optic

Rotosymmetrical optics

The nominal flux depends on the type of LEDs in use and it may be modified according to the quick and continuous development of the LED technology.For any further information concerning the luminous efficiency of the LEDs, please refer to our website.

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

88 9

452

Ø60

551Rotosymmetrical optics

01KA1B0000C

01KA1C0000C

Street Optic

01KA1B0008CHM3

01KA1C0008CHM3

01KA1D0008CHM3

01KA1E0008CHM3

Street Optic “front & back”

01KA1C00081CHM3

01KA1D00082CHM3

01KA1E00083CHM3

Pole systems

Please check the available heights and codes.

2 ArmS

The fitting is suitable for post-top installation and it is ideal for the lighting of green areas, cycle routes and parking areas. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics, street optics front & back and rotosymmetrical optics. All the versions with street optics are pro-vided with the system for the power reduc-tion based on the self learning of the virtual midnight (p. 28).

KALOS TPCUTOFFCl. II IP66 230V 50Hz max 8 kg.

Contact Highways Components Limited for guidance and advice.

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

500 500 500500 500 500 1000 1000 1000 1000 1000 1000

1010 11

452

Ø60

551

Street Optic

01KA1B0008CHM3

01KA1C0008CHM3

01KA1D0008CHM3

01KA1E0008CHM3


01KA1C00081CHM3

01KA1D00082CHM3

01KA1E00083CHM3

Arms for poles Ø102mm with adapter Ø60 at the top, H.120mm,

01KA902C0 B35 L=1000mm Sablé100noir

01KA903C0 B36 L=1000mm x 2 Sablé100noir



Other arms at page 26-27

The fitting is suitable for the installation on special arms, developed for Kalos, and it is ideal for the lighting of squares, residential areas and streets. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics. All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

2 ArmS


Pole systems

Please check the available heights and codes.Contact Highways Components Limited for guidance and advice.

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

1212 13

452

Ø60

551Rotosymmetrical optics

01KA2B0000CHM3

01KA2C0000CHM3

Street Optic

01KA2B0008CHM3

01KA2C0008CHM3

01KA2D0008CHM3

01KA2E0008CHM3


01KA2C00081CHM3

01KA2D00082CHM3

01KA2E00083CHM3

The fitting is suitable for post-top installation and it is ideal for the lighting of green areas, cycle routes and parking areas. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics, street optics front & back and rotosymmetrical optics. All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

4 ArmS


Pole systems


10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

1414

500 500500 500 1000 1000 1000 1000

15

452

Ø60

551

Street Optic

01KA2B0008CHM3

01KA2C0008CHM3

01KA2D0008CHM3

01KA2E0008CHM3


01KA2C00081CHM3

01KA2D00082CHM3

01KA2E00083CHM3







The fitting is suitable for the installation on special arms, developed for Kalos, and it is ideal for the lighting of squares, residential areas and streets. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics.All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

4 ArmS

CUTOFFCl. II IP66 230V 50Hz max 8 kg.

KALOS TP

Pole systems


10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

1616 17

594

Ø60

557

64

Rotosymmetrical optics

01KA2B0000CHM3

01KA2C0000CHM3

Street Optic

01KA2B0008CHM3

01KA2C0008CHM3

01KA2D0008CHM3

01KA2E0008CHM3


01KA2C00081CHM3

01KA2D00082CHM3

01KA2E00083CHM3

Decorative upper cover Sablé100 noir

01KA901C0

The fitting is suitable for post-top installation and it is ideal for the lighting of green areas, cycle routes and parking areas. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics, street optics front & back and rotosymmetrical optics. Accessories: decorative upper cover.All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

4 ArmS


KALOS TP

Pole systems


2020 21

452

278

Ø48-60

553123


01KA3C00081CHM3

01KA3E00084CHM3

Accessories

01KA900J0

The fitting is suitable for the installation on string and it is ideal for the lighting of urban streets. Light sources: from 20 and 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics front & back.All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

Version with red LED,

on request other colors are available.

4 ArmS

10+10 LED 700mA 40w 4100 lm 4000K

20+20 LED 700mA 80w 8200 lm 4000K

Suspension kit for string


KALOS S

452

Ø48-60

55385

10 LED 700mA 20w 2050 lm 4000K

20 LED 700mA 40w 4100 lm 4000K

30 LED 700mA 60w 6150 lm 4000K

40 LED 700mA 80w 8200 lm 4000K

10+10 LED 700mA 40w 4100 lm 4000K

10+20 LED 700mA 60w 6150 lm 4000K

10+30 LED 700mA 80w 8200 lm 4000K

500 500 500 5001000 1000 1000 1000

2222 23

Street Optic

01KA3B0008CHM3

01KA3C0008CHM3

01KA3D0008CHM3

01KA3E0008CHM3


01KA3C00081CHM3

01KA3D00082CHM3

01KA3E00083CHM3







The fitting is suitable for the installation on special arms, developed for Kalos, and it is ideal for the lighting of squares and streets. Light sources: from 10 to 40 POWER LEDs 4000K. On demand, also available in 3000K. Street optics. All the versions are provided with the system for the power reduction based on the self learning of the virtual midnight (p. 28).

Version with red LED,

on request other colors are available.

4 ArmS

KALOS SCUTOFFCl. II IP66 230V 50Hz max 8 kg.

Pole systems


2524

5.

Closure screen: flat tempered glass, 4mm, fastened to the body of the fitting by means of structural silicone and equipped with two safety mechanical blocks in technopolymere. The glass is serigraphed in the non-relevant parts as far as the optics is concerned.

6.

Electrical compartment: In order to carry on an easy maintenance without damaging the LED optical system, the electrical compartment has been separated from the optical one; it is accessible by unscrewing the closure screws which close its cover; it is possible to have free access to the wiring compartment, to the power disconnector and the electrical components mounted on a black self-extinguishing V0 technopolymer plate, injected in a single piece. In order to facilitate the maintenance of the wiring plate, this is easily removable by loosening the fastening clips at the base of the fitting and by disconnecting the fast electrical connectors, which are characterised for shape and colour. The connection to the electrical line is placed under the wiring plate, in order to protect it from any accidental contact.

7.

Electrical wiring: The power supply group includes an electronic driver mounted on a removable plate, made of a resined monobloc, granting the isolation class II of the component and a TMOV (thermally protected metal oxide varistor), which represents a suitable protection against over-voltages up to 10KV, any distrurbs due to atmospheric agents or to unbalances of the charge.

1.

Extraordinary maintenance: possibility of extraordinary maintenance of the optical unit by means of replacement of the LED-head of the fitting.

2.

Body, arms and head of the fitting: die-cast aluminium alloy UNI EN AB46100 paintedafter a phosphor-chromium plating treatment in the colors dark grey Sablé100Noir.

3.

LED system: the optical system is equipped with white LEDs, positioned by means of a «pick and place» system on a heat sinking printed circuit board (MCPCB) granting the thermal management and the best functionality of the system. The same circuit is provided with an optical system, which is composed of polymethilmetacrylate high transparency lenses (rotosymmetrical version) or microreflectors in metallized polycarbonate, protected against humidity (street optics). Both optics have been developed according to the multilayer concept: each lens or reflector has the same photometrical distribution as all the others.

4.

Fastening system: post top Ø 60 mm. Suspended on Ø 48-60 mm arms.

Structural elements KALOSCUTOFFCl. II IP66 230V 50Hz max 8 kg.Structural Elements

1000

1000 1000

500

500

500

500

1000

1000 1000

500

500

26 27

640

810

810 810

01KA906C0

B39 Arm L=1000mm with joint for poles Ø102mm Sablé100Noir

01KA907C0

B44 Double arm L=1000mm x 2 with joint for poles Ø102mm Sablé100Noir

01AK932C0

B12 Curved arm L=640mm for poles Ø60mm Sablé100Noir

01AK935C0

B15 Curved arm L=820mm for poles Ø102mm Sablé100Noir

01AK936C0

B16 Double curved arm L=820mm x 2 for poles Ø102mm Sablé100Noir

01KA908C0


01KA909C0


01KA906C0


01KA907C0


01KA908C0


01KA909C0


KALOSCUTOFFCl. II IP66 230V 50Hz max 8 kg.Bracket Systems

2928

1101009080706050403020100

Dim

m

DAY 1: 12 hours DAY 3: 12 hoursDAY 2: 12 hours DAY 4: 12 hours DAY 5: 12 hours

On

70%

100%

MV

5 hours

Off

Flexible regulation system of both the luminous flux and the reduction time

In this case, the electronic driver which is installed in the fittings is produced by PhiLiPS and it is supplied with a Dynadim system, completely integrated. This function, adjustable through the connection to a software, enables the regulation of flux and time, up to 5 levels. The virtual time of the timer is determined during the functioning of the driver in the first 3 nights; then, after the calculation of the virtual midnight, it automatically carries out the scheduled dimming.

rEmotE monitorinG AnD ControL SyStEm

Through the remote monitoring and control system communication (without additional cables in the installation), it is possible to communicate with every single lighting fitting. In this way it is possible to monitor the functioning and define the behaviour of each LED fitting, on the basis of pre-defined luminous standard. A central control unit in each installation, which can also be remote controlled, monitors every lighting fitting 24 hours a day.

SELF-LEArninG virtuAL miDniGht (mv) with PoSSiBiLity oF rEGuLAtion

Regulation system of the luminous flux, fixed tim

By means of a rotary switch, it is possible to set up the dimming level by regulating the current.The regulation of the luminous flux can vary from 100% to 55% with adjustment possibility each 5%. The analysis of the duration of the nights, with identification of the virtual midnight, is realised during the first 10 nights; once identified, the drivers carries out the power reduction starting from the virtual midnight, for a fixed time of 5 hours. (The duration of the period is not adjustable).There are 16 pre-defined and not modifiable programs for the power reduction.The fitting, in all its version with street optics and with rotosymmetrical optics with 4 arms, is delivered with driver already programmed as follows:

Light Regulation Systems

3130

Lm La.z Lu.z H H1 Emed U0

UnI11248 (CE2) 20 0,4

10+10 Led Optic STR 4100 30 15 4 4,6 20 0,4

Lm n La H H1 D K Lm (cd/m2) U0 Ul Ti Sr Emed

UnI11248 (Me5) 0,5 0,35 0,4 ≤ 15% ≥ 0,5

10 Led Optic STR 2050 2 5 4,5 5,1 20 4,4 0,5 0,42 0,59 8,82 0,71 9

Lm La.z Lu.z H H1 D K Emed U0

20 Led Optic ROTO 4100 30 15 4 4,6 18 4,5 16 0,49

Lm n La H H1 D K Emed Emin

UnI11248 (S1) 15 5

20 Led Optic STR 4100 1 3 4 4,6 22,5 5,6 17 5

Lm La.z Lu.z H H1 Emed Emin

UnI11248 (S2) 10 3

10+10 Led Optic STR (TP) 4100 25 25 5 5,6 13 4

22.5m

18m

28m

15m

20m

0 2.5 5 7.5 10m 12.5 15 17.5 20 22.5 27.525 30

0

5

10

2.5

7.5

12.5

1520 led

14

14

17

17 17

17171720

23 23

26 262929

20

0 2 4 6 8m 10 12 14 16 18 2220

0

2 20 led

5

0 2 4 6 8m 10 12 14 16 18 2220 24

0

4

8

2

6

10

10+10 led7

1013

1316

1619

19

2222 25252828

0 2 4 6 8m 10 12 14 16 18 20

0

4

2

10 led

5 7 9 11

0 2.5 5 7.5 10m 12.5 15 17.5 20 22.5 27.525 30

0

15

5

20

10

25

2.5

17.5

7.5

22.5

12.5

27.5

30

17

17

17

17

1717

20

2020

20

2323

23

23

26

26

29

29

29

32

32 32

10+10 led

Lm =

Flux lm

n =

N° lane

La =

Street width

H =

Height

H1=


D =

Interdistance

K = D/H

La.z =

Area width

Lu.z =

Area length

Emed =


Emin =


Uo(Em) =

General uniformity

Lm[Cd/m2] =

Average luminance

U0(Lm) =

General uniformity

Ul(Lm) =

Lenghtwise uniformity

Ti% =

Dazzling index

Sr =

Contiguity ratio

STR. =

Street Optic

Cycle r

Fahrradweg

Green area

Parking

Square

Street

KALOS

III32

Data sheet

Supply Current

Nominal voltage (or range)

Ambient temperature (Ta)

Insulation class

Suitable for installation on normally

inflammable surfaces

Protection degree

Use limit for photo-biological risk

Notes for non-replaceable modules or

non-replaceable modules by final user

Nominal life (in h) of LED module and value

of nonimal light flux maintenance (Lx)

Ambient temperature of the fitting (Tq)

Colour rendering index (CRI)

Colour temperature (CCT)

700mA

230V 50/60 Hz

-40°c + 45°C

II

YES

IP66

NO

NO

50.000h - L70

25°C

≥ 70

4000K

N°LED K

KALOSTP 10 4000 24W 20W 1600 2050 67

20 4000 45W 40W 3200 4100 71

street optics 30 4000 70W 60W 4800 6150 69

40 4000 90W 80W 6400 8200 71

KALOSTP 10 4000 24W 20W 1600 2050 67

45W 40W 3200 4100 71

rotosymmetrical optics

KALOSS 10 4000 24W 20W 1800 2050 75

20 4000 45W 40W 3600 4100 80

street optics 30 4000 70W 60W 5400 6150 77

40 4000 90W 80W 7200 8200 80

total absorbed

power

Led plate

absorbed power

Lumen output

of the fitting

Led plate nominal

lumen output

Efficiency of LED

fitting (lm/w)

All specifications here printed aren’t binding. In order to constantly improve its production, Highway Components Limited & Fivep reserves itself the right to modify products without notice.

KALOSCUTOFFCl. II IP66 230V 50Hz max 8 kg.Data Sheet

Documents

KALOS ONE BODY TWO SOULS - Highway Components · KALOS Post top String Arm Arm 4 arms Pag. 12 4 arms Pag. 22 4 arms Pag. 14 2 arms Pag. 8 Pag. 20 2 arms Pag. 10 4 arms Pag. 16. 2