Upload
others
View
6
Download
0
Embed Size (px)
Citation preview
INDEX
Dillard'sProduct Development
Revised 01/15/15
COMPONENTS
SECTION POM DESCRIPTION PAGE #
Pocket Placementat Chest
Pocket PlacementPC-01 Pocket-HPS to Flap Top (Chest) 1PC-02 Pocket-HPS to Pocket Top (Chest) 2PC-07 Pocket from Center Front (Chest) 3PC-09 Pocket from HPS (Overalls/Jumper) 4PC-10 Pocket from Top of Bib 5
PW-01 Pocket-HPS to Flap Top (Waist) 6PW-02 Pocket-HPS to Pocket Top (Waist) 7PW-03 Pocket from Center Front (Waist) 8
PH-01 Pocket-HPS to Flap Top (Hip) 9PH-02 Pocket-HPS to Pocket Top (Hip) 10PH-04 Pocket-Up from Hem (Hip) 11PH-05 Pocket-Up from Join Seam (Hip) 12PH-06 Pocket from Center Front (Hip)
PH-07 Pocket-Side Seam from HPS (Hip)
13
PH-08 Leg Pocket-from BB
14
PH-09 Leg Pocket-BB to Flap Top
15
PB-01 Side Seam Pocket-from BB
16
PB-02 Side Seam Pocket-from TB
17
PB-03 Pocket from BB at Front Waist
18
PB-04 Pocket from Top of Front Waist
19
PB-05 Pocket from BB at Back Waist
20
PB-07 Pocket from Yoke Seam22
PB-09 Pocket from Side Seam23
PB-10 Pocket from Center Back 25
PB-20 Lower Front Pocket from HPS 26
PB-06 Pocket from Top of Back Waist21
24
PB-21 Lower Back Pocket from HPS 27
INDEX 1
Pocket Placementat Waist
Pocket Placementat Hip
Pocket PlacementBelow Waist(Bottoms)
INDEX
Dillard'sProduct Development
Revised 01/15/15
COMPONENTS
SECTION POM DESCRIPTION PAGE #
Pocket Dimensions PK-01 Pocket Flap Width-at Top 28PK-02 Pocket Flap Width-at Bottom 29PK-03 Pocket Flap Height-at Center 30PK-04 Pocket Flap Height-at Side 31PK-11 Pocket Side Length with Flap 32
PK-13 Pocket Height-at Center 34PK-14 Pocket Height-at Side 35PK-17 Pocket Width-at Bottom 36
PK-19 Pocket Opening 38PK-20 Pocket Opening-Welt Pocket 39PK-21 Pocket Height-Hidden Bag with Welt 40PK-22 Pocket Width-Hidden Bag with Welt 41PK-23 Pocket Opening-to Side Seam
PK-24 Pocket Opening-at Side Seam
42
PK-25 Coin Pocket-from Waist
43
PK-26 Coin Pocket Height
44
PK-28 Coin Pocket Top Width
45
PK-29 Pocket Bag Length/Depth
47
PK-30 Pocket Bag Width
48
PK-31 Pocket Zipper Opening
4950
BE-04 Belt Length-Tie/Sash/Drawstrip51
BE-06 Belt Length-Attached Belt52
BE-10 Tab Length 54
BE-11 Tab Width 55
BE-01--03 Belt Length-with Buckle or Slider
53
BE-12 Binding/Banding Height/Belt Height 56
PK-12 Pocket Height with Flap 33
PK-18 Pocket Width-at Top Edge 37
PK-27 Coin Pocket-from Side Seam 46
BeltBelts/Drawstrings/Loops
INDEX 2
INDEX
Dillard'sProduct Development
Revised 01/15/15
COMPONENTS
SECTION POM DESCRIPTION PAGE #
BeltBelts/Drawstrings/Loops
BE-13 Tie Length-Casing 57BE-14 Tie Length-Attached 58BE-15 Graded Tie Length 59
LP-06 Belt Loop Height 60
LP-08 Belt Loop Inside Opening 62LP-09 Locker Loop Length-Hanging 63LP-10 Locker Loop Height-Hanging 64
LP-12 Hammer Loop Width 66LP-13 Hammer Loop Set from Pocket 67LP-14 Belt Loop Position from HPS 68
BB-01 Yoke/Bib Depth-Overalls
BB-02 Yoke/Bib Width-Top Edge-Overalls69
BB-03 Yoke/Bib Width-at Join Seam-Overalls70
BB-04 Diamond Depth-Overalls7172
BT-01 Bootie/Foot at Leg-Relaxed
BT-02 Bootie/Foot at Leg-Extended79
BT-03 Bootie/Foot Length8081
83BT-05 Bootie/Foot Side Height
LP-07 61
LP-11 Hammer Loop Length 65
BB-05 Diamond Width-Overalls 73
Bibs/Yoke TopBibs/Overalls/Straps
Bootie/Foot
BT-04 Bootie/Foot Width 82
INDEX 3
BB-06 Bib Center Front Length 74
Bib Shoulder Width 75
BB-08 Bib Total Length 76
BB-09 Bib Width 77BB-10 Bib Neck Width 78
Belt Loop Wuidth
BB-07
Loops
INDEX
Dillard'sProduct Development
COMPONENTS
SECTION POM DESCRIPTION PAGE #
Collars CL-05 Collar Height-CB/CF 89CL-06B Collar Band-CB Height 90CL-06F Collar Band-CF Height 91
CL-08 Neck Band Height-Snap/Zipper Band 93
CL-10 Collar Height-Built-Up 95CL-12 Collar Band-Button to Hole End 96CL-13 Collar Length-at Seam 97
CL-15 Collar Width-at Edge (Sailor) 99
CP-01 Collar Point-Regular 100
CP-03 Collar Lapel-Regular
CP-04 Collar Lapel-Shawl
102
CP-05 Collar Lapel-at Notch
103
CP-06 Collar Lapel-Notch Spread
104105
CS-02 Collar Spread 107
CF-01 Cuff Height 108
110
CL-09 Collar Height-at Shoulder 94
CL-14 Collar Length-at Top Edge 98
CS-01 Collar-Tie Space 106
CF-02 Turn Up Cuff Height 109
Cuffs
CL-07 Collar Height-Rib/Binding 92
CP-02 Collar Point-Lapel 101
Revised 01/15/15INDEX 4
CF-03 Sleeve Cuff Opening to First Button (Long)
BW-01 Bow Length
BW-02 Bow Width 85BW-03 Bow Stay Height 86
84
BW-04 Bow Tie Length 87
Bows
BW-05 Bow Stay Width 88
Collar Point
Collar Tie Space/Spread
INDEX
Dillard'sProduct Development
COMPONENTS
SECTION POM DESCRIPTION PAGE #
Cuffs
CF-10 F/H Cuff Opening-Rib/Elastic-Extended Full/Half116
CF-12 Turn-Up Cuff Height-Pant117
CF-13 Button Placement-Sleeve Placket118
DS-02 Drawstring Length-Neck
119
DS-04 Drawstring Placement from HPS-Waist121
DS-05 Drawstring Length-Sweep (Tops)122
DS-06 Drawstring-Each Tie Length123
GS-01 Gusset-Vertical Height
125
MW-01 Half Moon WidthMW-02 Half Moon Depth
127
HE-01 F/H Headband Length Relaxed Full/Half
128129
HE-03 F/H Headband Length Extended Full/Half
131
HE-05 Headband Inset Extended133134
DS-03 Drawstring Length-Waist120
DS-07--10 Drawstring Length-Leg Opening
HE-02 Headband Height130
DrawstringsBelts/Drawstrings/Loops
GS-02 Gusset-Horizontal Width126
(Long/3/4/Capri/Bermuda/Knee/Short)
124
Gussets
Half Moons
HeadbandsHats/Headbands/Hoods
HE-04 Headband Inset-Relaxed
132
CF-09 F/H Cuff Opening-Rib/Elastic-Relaxed Full/Half
INDEX 5 Revised 01/15/15
CF-06 Sleeve Placket Opening
CF-07 Sleeve Placket Width
113
CF-08 Sleeve Placket Width-Under Placket
114
CF-04 Sleeve Cuff Opening to Second Button (Long)112111
CF-05 Sleeve Placket Length
115
INDEX
Dillard'sProduct Development
COMPONENTS
SECTION POM DESCRIPTION PAGE #
HatsHats/Headbands/Hoods
HT-07 Hat Visor-Length at Join Seam140
HT-08 Binding Height-Inside Hat141
HT-09 Crown Width-Seam to Seam142
HD-01 Hood Width-at Widest
143
HD-03 Hood Crown Length-Center145
HD-04 Hood at CF Neck Height146
HD-05 Hood Opening-Relaxed147
PL-03 Placket Width-Edge to Stitching
PL-04 Button/Snap Spacing-Center to Center
153
154
PL-09 Tubular Join Height
158
160
HD-02 Hood Height-at HPS144
HD-06 Hood Opening-Extended
PL-08 Slit/Keyhole Length157
PL-01 Placket Length
151
148
PlacketsPlackets/Zippers/Flys
PL-10 Ruffle/Flounce Height
159
HD-07 Hood Drawstring-Each Tie Length149
HD-08 Hood Drawstring Length Total150
PL-02 Placket Width-Edge to Edge
152
PL-05 Button/Snap Spacing-Center to Bottom Opening155
PL-06 Front Overlap156
HT-06 Hat Visor-Height
Revised 01/15/15INDEX 6
HT-01 Hat Length-Top of Hat to Edge
HT-02 F/H Hat Width-at Edge-Relaxed Full/Half
HT-03 F/H Hat Width-at Edge-Relaxed Full/Half
HT-04 Brim Rolled HeightHT-05 Brim Un-Rolled Height
135
136
137
138139
Hood
INDEX
Dillard'sProduct Development
COMPONENTS
SECTION POM DESCRIPTION PAGE #
StrapsBibs/Overalls/Straps
SS-01 Strap Spread at Join-Front
166
SS-02 Strap Spread at Join-Back167
SS-03 Strap Length-Seam to Seam168
SS-05 Strap Length with Adjustment170
SS-09--10 Strap Length to Buckle End or Center of First Button172
SV-01 Vent/Slit Length
173SS-08 Strap Adjustment
171
SV-02 Vent Overlap
175
SV-03 Vent/Slit Length-Front
176
SV-04 Vent/Slit Length-Back
177
179
SS-04 Strap Spread at HPS169
Slit/VentVents
SV-05 Vent Length
178
SP-03 Shoulder Pad Thickness
Revised 01/15/15INDEX 7
Ties TI-01 Tie Length 180
TI-02 Tie Width 181
TI-03-08 Tie Width-from Apron/Tail 182
TI-09 Self Loop/Bar Tack from Apron/Tail 183
TI-10 Tipping 184
TI-11 Interlining Edge 185
PD-03 Pleat Stitch Down Length
SP-01 Shoulder Pad Length
163
PD-01 Pleat Distance162
SP-02 Shoulder Pad Width
164
161
PD-02 Pleat Depth
Pleats
Shoulder Pads165
SS-11 Strap Adjustment 174
TI-12 Width-from Apron/Tail 186
INDEX
Dillard'sProduct Development
COMPONENTS
Revised 09/25/17INDEX 8
SECTION POM DESCRIPTION PAGE # Yokes YK-01 Front Yoke-HPS to Seam (Tops) 187 YK-02 Back Yoke-HPS to Seam (Tops) 188 YK-03 Yoke Height-CB (Tops) 189 YK-04 Yoke Height-CF (Tops) 190 YK-05 Yoke Height-CF (Bottoms) 191 YK-06 Yoke Height-CB (Bottoms) 192 YK-07 Yoke Height-Side (Bottoms) 193 YK-08 Yoke Height-CF Top Edge (Bottoms) 194 YK-09 Yoke Height-CB Top Edge (Bottoms) 195 YK-10 Yoke Height-Side Top Edge (Bottoms) 196 YK-11 Yoke-at Neck 197 YK-12 Yoke-at Mid Shoulder 198 YK-13 Yoke-at Armhole 199
Plackets/Zippers/FlysFlys FF-01 Fly Length-Below Band 200 FF-02 Fly Length-Waist Stitch 201 FF-03 Fly Opening-Functional 202 FF-04 Fly Width-Edge to Outer Stitch 203
Zippers ZP-01--02 Zipper Length-Waist/Hip 204 ZP-03 Zipper Opening-Dress/Top 205 ZP-04--05 Zipper Opening-Back/Side-Pant/Skirt 206 ZP-06 Zipper Length-Leg/Sleeve Opening 207 ZP-07 Zipper Opening-Placket 208 Gloves GL-01 Length from Opening Edge to Finger Tip 209 GL-02 F/H Palm Width Edge to Edge Full/Half 210 GL-03 Thumb Length 211 GL-04 Mid-Finger Length 212 GL-05 Finger Tip to Thumb Length 213
INDEX
Dillard'sProduct Development
COMPONENTS
Revised 09/25/17INDEX 9
SECTION POM DESCRIPTION PAGE #
Gloves GL-06 F/H Glove Opening Full/Half 214 GL-07 Cuff Rib Height 215 GL-08 Forefinger Length 216 GL-09 Third Finger Length 217 GL-10 Small Finger Length 218
Measure from HPS to top of flap.
PC-01 Pocket-HPS to Flap Top (Chest)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 1
POCKETS
HPS
Measure from HPS to top of pocket.
PC-02 Pocket-HPS to Pocket Top (Chest)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 2
POCKETS
HPS
Measure from Center Front to edge of pocket at top of pocket.
PC-07 Pocket from Center Front (Chest)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 3
POCKETS
CF
Measure from HPS to top of pocket.
PC-09 Pocket-from HPS (Overalls/Jumper)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 4
POCKETS
HPS
Measure from top of bib to top of pocket at center of pocket.
PC-10 Pocket from Top of Bib
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 5
POCKETS
Measure from HPS to top of flap.
PW-01 Pocket-HPS to Flap Top (Waist)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 6
POCKETS
HPS
Measure from HPS to top of pocket.
PW-02 Pocket-HPS to Pocket Top (Waist)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 7
POCKETS
HPS
Measure from Center Front to edge of pocket at top of pocket.
PW-03 Pocket from CF (Waist)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 8
POCKETS
CF
Measure from HPS to top of flap.
PH-01 Pocket-HPS to Flap Top (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 9
POCKETS
HPS
Measure from HPS to top of pocket.
PH-02 Pocket-HPS to Pocket Top (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 10
POCKETS
HPS
Measure from hem to bottom of pocket.
PH-04 Pocket-Up from Hem (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 11
POCKETS
Measure up from join seam to bottom of pocket.
PH-05 Pocket-Up from Join Seam (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 12
POCKETS
Measure from Center Front to edge of pocket at top of pocket.
PH-06 Pocket from CF (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 13
POCKETS
CF
Place a ruler across the garment from top of pocket to top of pocket.Measure from HPS to the ruler.
PH-07 Pocket-Side Seam from HPS (Hip)
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 14
POCKETS
HPS
Measure along the outseam from waistband join seam to top of pocket.
PH-08 Leg Pocket-from BB
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 15
POCKETS
Measure along the outseam from waistband join seam to top of flap.
PH-09 Leg Pocket-BB to Flap Top
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 16
POCKETS
Measure along the side seam from waistband join seam to pocket start.
PB-01 Side Seam Pocket-from BB
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 17
POCKETS
Measure along the side seam from top of waist to pocket start.
PB-02 Side Seam Pocket-from TB
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 18
POCKETS
Measure from waistband join seam to top of pocket at center of pocket.
PB-03 Pocket from BB at Front Waist
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 19
POCKETS
Measure from top of waist to top of pocket at center of pocket.
PB-04 Pocket from Top of Front Waist
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 20
POCKETS
Measure from waistband join seam to top of pocket at center of pocket.
PB-05 Pocket from BB at Back Waist
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 21
POCKETS
Measure from top of waist to top of pocket at center of pocket.
PB-06 Pocket from Top of Back Waist
Product Development
Revised 2/21/07
COMPONENTS
Page 22
POCKETS
Measure from yoke seam to top of pocket at center of pocket.
PB-07 Pocket from Yoke Seam
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 23
POCKETS
Measure from side seam to edge of pocket at top of pocket.
PB-09 Pocket from Side SeamPB-09 Pocket from Side Seam Extended
Dillard'sProduct Development
Revised: 10/16/18
COMPONENTS
Page 24
POCKETS
Measure from Center Back seam to edge of pocket at top of pocket.
PB-10 Pocket from CB
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 25
POCKETS
Measure from HPS to top of pocket.
PB-20 Lower Front Pocket from HPS
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 26
POCKETS
HPS
Measure from HPS to top of pocket.
PB-21 Lower Back Pocket from HPS
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 27
POCKETS
HPS
Measure along top edge from edge to edge.
PK-01 Pocket Flap Width-at Top
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 28
POCKETS
Measure along bottom edge from corner to corner.
PK-02 Pocket Flap Width-at Bottom
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 29
POCKETS
Measure from edge to edge.
PK-03 Pocket Flap Height-at Center
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 30
POCKETS
Measure from edge to corner.
PK-04 Pocket Flap Height-at Side
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 31
POCKETS
Measure from top edge of flap to corner of pocket.
PK-11 Pocket Side Length with Flap
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 32
POCKETS
Measure from top edge of flap to bottom of pocket at center of pocket.
PK-12 Pocket Height with Flap
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 33
POCKETS
Measure from edge to edge.
PK-13 Pocket Height-at Center
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 34
POCKETS
Patch Pocket
Double Welt Pocket
Single Welt Pocket
Measure from edge to corner.
PK-14 Pocket Height-at Side
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 35
POCKETS
Measure straight across from corner to corner.
PK-17 Pocket Width-at Bottom
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 36
POCKETS
Measure from edge to edge.
PK-18 Pocket Width-at Top Edge
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 37
POCKETS
Measure along opening from pocket start to pocket end.Bar tacks not included.
PK-19 Pocket Opening
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 38
POCKETS
Measure along opening from seam to seam.Bar tacks not included.
PK-20 Pocket Opening-Welt Pocket
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 39
POCKETS
Double Welt Pocket
Single Welt Pocket
Measure at center from top of welt seam to bottom stitch.
Exclude seam allowance.
PK-21 Pocket Height-Hidden Bag with Welt
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 40
POCKETS
Measure at center from stitch to stitch.
Exclude seam allowance.
PK-22 Pocket Width-Hidden Bag with Welt
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 41
POCKETS
Measure along waistband join seam from edge to side seam.
PK-23 Pocket Opening-to Side Seam
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 42
POCKETS
Measure along side seam from waistband join seam to edge.
PK-24 Pocket Opening-at Side Seam
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 43
POCKETS
Measure straight from waistband join seam to top edge of pocket.
PK-25 Coin Pocket-from Waist
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 44
POCKETS
Measure from top edge of coin pocket to edge of larger pocket.
PK-26 Coin Pocket Height
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 45
POCKETS
Measure from top edge of coin pocket to side seam.
PK-27 Coin Pocket-from Side Seam
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 46
POCKETS
Measure from inside edge of the larger pocket to outside edge of coin pocket.
PK-28 Coin Pocket Top Width
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 47
POCKETS
Measure from stitch line at top to stitch line at longest point.
Exclude seam allowance.
PK-29 Pocket Bag Length/Depth
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 48
POCKETS
Measure at widest point from stitch line to stitch line.
Exclude seam allowance.
PK-30 Pocket Bag Width
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 49
POCKETS
With zipper open, measure the opening from top of slider to top stop.
PK-31 Pocket Zipper Opening
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 50
POCKETS
Buckle: Measure from the inside edge (nose) of the buckle to the third or center eyelet/hole.Slider: Measure from the inside edge (nose) of the slider to the tip.
BE-01 Belt Length-with BuckleBE-03 Belt Length-with Slider
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 51
BELTS
DRAWSTRINGS
LOOPS
Measure at center from edge to edge.
BE-04 Belt Length-Tie/Sash/Drawstrip
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 52
BELTS
DRAWSTRINGS
LOOPS
Measure from side seam to end.
BE-06 Belt Length-Attached Belt
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 53
BELTS
DRAWSTRINGS
LOOPS
Side Seam
Measure from seam to end.
BE-10 Tab Length
Dillard'sProduct Development
Revised: 9/22/17
COMPONENTS
Page 54
BELTSDRAWSTRINGS
LOOPS
BE-10 Scarf Length
Scarf: Measure from edge to edge
Measure from edge to edge.
BE-11 Tab WidthBE-11 Scarf Width
Dillard'sProduct Development
Revised: 9/22/17
COMPONENTS
Page 55
BELTSDRAWSTRINGS
LOOPS
Measure from edge to edge.
BE-12 Binding/Banding Height/Belt Height
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 56
BELTS
DRAWSTRINGS
LOOPS
Keeping the casing flat, pull out all excess string (do NOT stretch).Measure from top of casing to ends of ties.
BE-13 Tie Length-Casing
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 57
BELTS
DRAWSTRINGS
LOOPS
Measure from top of tie at seam to end.
BE-14 Tie Length-Attached
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 58
BELTS
DRAWSTRINGS
LOOPS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch). Measure from side seam to ends of drawstrings.
BE-15 Graded Tie Length
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 59
BELTS
DRAWSTRINGS
LOOPS
Without Bar tack: Measure from fold to fold.With One Bar tack: Measure from fold to bar tack.With Two Bar tacks: Measure from bar tack to bar tack.
LP-06 Belt Loop Height
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 60
BELTS
DRAWSTRINGS
LOOPS
No Bar Tack One Bar Tack Two Bar Tacks
Measure at center from edge to edge.
LP-07 Belt Loop Width
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 61
BELTS
DRAWSTRINGS
LOOPS
Measure opening.
LP-08 Belt Loop Inside Opening
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 62
BELTS
DRAWSTRINGS
LOOPS
Measure along join seam from outer edge to outer edge.
LP-09 Locker Loop Length-Hanging
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 63
BELTS
DRAWSTRINGS
LOOPS
Measure at center from edge to edge.
LP-10 Locker Loop Height-Hanging
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 64
BELTS
DRAWSTRINGS
LOOPS
Measure at center from seam to seam.
LP-11 Hammer Loop Length
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 65
BELTS
DRAWSTRINGS
LOOPS
Measure from edge to edge.
LP-12 Hammer Loop Width
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 66
BELTS
DRAWSTRINGS
LOOPS
Measure from bottom of pocket to top of loop at side join seam.
LP-13 Hammer Loop Set from Pocket
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 67
BELTS
DRAWSTRINGS
LOOPS
Place a ruler across the garment from top of belt loop to top of belt loop.Measure straight from HPS to the top of the ruler.
LP-14 Belt Loop Position from HPS
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 68
BELTS
DRAWSTRINGS
LOOPS
At center, measure straight from top edge to waist seam.
BB-01 Yoke/Bib Depth-Overalls
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 69
BIBS
OVERALLS
STRAPS
At top, measure straight across from edge to edge.
BB-02 Yoke/Bib Width-Top Edge-Overalls
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 70
BIBS
OVERALLS
STRAPS
At waist join seam, measure straight across from edge to edge.
BB-03 Yoke/Bib Width-at Join Seam-Overalls
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 71
BIBS
OVERALLS
STRAPS
At center of diamond, measure straight from top point to bottom point.
BB-04 Diamond Depth-Overalls
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 72
BIBS
OVERALLS
STRAPS
Measure straight across diamond from side point to side point.
BB-05 Diamond Width-Overalls
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 73
BIBS
OVERALLS
STRAPS
BB-06 Bib Center Front Length
Product Development
Revised 4/17/09
COMPONENTS
Page 74
BIBSOVERALLS
STRAPS
Measure from center front neck edge to bottom edge of Bib.
BB-07 Bib Shoulder Width
Product Development
Revised 4/17/09
COMPONENTS
Page 75
BIBSOVERALLS
STRAPS
Measure edge to edge at 1 1/2 up from neck edge.
BB-08 Bib Total Length
Product Development
Revised 4/17/09
COMPONENTS
Page 76
BIBSOVERALLS
STRAPS
Measure from top edge to bottom edge of Bib.
BB-09 Bib Width
Product Development
Revised 4/17/09
COMPONENTS
Page 77
BIBSOVERALLS
STRAPS
Measure at widest part from edge to edge.
BB-10 Bib Neck Width
Product Development
Revised 4/17/09
COMPONENTS
Page 78
BIBSOVERALLS
STRAPS
Measure from edge to edge 1 1/2" up from CF neck edge.
Measure at center of elastic from fold to fold.
BT-01 Bootie/Foot at Leg Relaxed
Product Development
Revised 2/21/07
COMPONENTS
Page 79
BOOTIEFOOT
Extend garment as far as fabric will allow without overextending.Measure from fold to fold at center of elastic.
BT-02 Bootie/Foot at Leg Extended
Product Development
Revised 2/21/07
COMPONENTS
Page 80
BOOTIEFOOT
At center of bootie, measure from heel seam to toe seam.
BT-03 Bootie/Foot Length
Product Development
Revised 2/21/07
COMPONENTS
Page 81
BOOTIEFOOT
At widest point of bootie, measure from seam to seam.
BT-04 Bootie/Foot Width
Product Development
Revised 2/21/07
COMPONENTS
Page 82
BOOTIEFOOT
Measure from ankle join seam or stitch line to bottom join seam.
BT-05 Bootie/Foot Side Height
Product Development
Revised 2/21/07
COMPONENTS
Page 83
BOOTIEFOOT
Stitch Line Join Seam
Measure at center from fold to fold.
BW-01 Bow Length
Product Development
Revised 2/21/07
COMPONENTS
Page 84
BOWS
Measure along the fold from edge to edge.
BW-02 Bow Width
Product Development
Revised 2/21/07
COMPONENTS
Page 85
BOWS
At center of bow stay, measure from fold to fold.
BW-03 Bow Stay Height
Product Development
Revised 2/21/07
COMPONENTS
Page 86
BOWS
Measure from bow stay to end.
BW-04 Bow Tie Length
Product Development
Revised 2/21/07
COMPONENTS
Page 87
BOWS
At center of bow stay, measure from fold to fold.
BW-05 Bow Stay Width
Product Development
Revised 1/13/09
COMPONENTS
Page 88
BOWS
Measure straight from collar join seam to the collar edge at Center Back,Center Front. Do not include collar stand, if garment has one.
CL-05 Collar Height-CB/CF
Product Development
Revised 2/9/09
COMPONENTS
Page 89
COLLARS
Measure straight from neck join seam to collar join seam at Center Back.
CL-06B Collar Band-CB Height
Product Development
Revised 2/21/07
COMPONENTS
Page 90
COLLARS
Measure through center of button from neck join seam to top of collar band at Center Front.
CL-06F Collar Band-CF Height
Product Development
Revised 2/21/07
COMPONENTS
Page 91
COLLARS
Measure from top edge of rib/binding to neck join seam at Center Back.
CL-07 Collar Height-Rib/Binding
Product Development
Revised 2/21/07
COMPONENTS
Page 92
COLLARS
Measure from top edge of band to neck join seam.
CL-08 Neck Band Height-Snap/Zipper Band
Product Development
Revised 2/21/07
COMPONENTS
Page 93
COLLARS
Measure straight from collar join seam to the collar edge.
CL-09 Collar Height-at Shoulder
Product Development
Revised 2/21/07
COMPONENTS
Page 94
COLLARS
Measure from HPS to top edge.
CL-10 Collar Height-Built-Up
Product Development
Revised 2/21/07
COMPONENTS
Page 95
COLLARS
HPS
Measure straight across from center of button to the outermost end of buttonhole.For a two button band, use outermost button and hole as the point of measure. If band is curved, DO NOT straighten the band.For half measurement,fold at center Front/Back
CL-12 Collar Band-Button to Hole EndCL-12H Collar Band-Button to Hole End-Half
Product Development
Revised 3/31/08
COMPONENTS
Page 96
COLLARS
Measure along collar join seam from edge to edge.For half measurement, fold at Center Front/Back.
CL-13 Collar Length-at SeamCL-13H Collar Length-at Seam-Half
Dillard'sProduct Development
Revised 4/15/16
COMPONENTS
Page 97
COLLARS
Measure along top edge from edge to edge.For half measurement, fold at Center Front/Back
CL-14 Collar Length-at Top EdgeCL-14H Collar Length-at Top Edge-Half
Product Development
Revised 3/31/08
COMPONENTS
Page 98
COLLARS
Measure along edge from edge to edge.
CL-15 Collar Width-at Edge (Sailor)
Product Development
Revised 2/21/07
COMPONENTS
Page 99
COLLARS
Measure from collar join seam to corner.
CP-01 Collar Point-Regular
Product Development
Revised 2/21/07
COMPONENTS
Page 100
COLLARS
Measure straight from collar point to lapel seam.
CP-02 Collar Point-Lapel
Product Development
Revised 2/21/07
COMPONENTS
Page 101
COLLARS
Place the tape measure perpendicular to roll line at widest point.Measure from roll line to lapel edge.
CP-03 Collar Lapel-Regular
Product Development
Revised 2/21/07
COMPONENTS
Page 102
COLLARS
Place the tape measure perpendicular to roll line at widest point.Measure from roll line to collar edge.
CP-04 Collar Lapel-Shawl
Product Development
Revised 2/21/07
COMPONENTS
Page 103
COLLARS
Place the tape measure perpendicular to roll line at notch.Measure from roll line to lapel edge.
CP-05 Collar Lapel-at Notch
Product Development
Revised 2/21/07
COMPONENTS
Page 104
COLLARS
Measure from collar point to lapel point.If collar or lapel is rounded, use the center of the corner.
CP-06 Collar Lapel-Notch Spread
Product Development
Revised 2/21/07
COMPONENTS
Page 105
COLLARS
With neck buttoned and center of shank moved to the outermost edge of the buttonhole, measure from collar edge to collar edge.
CS-01 Collar-Tie Space
Product Development
Revised 2/21/07
COMPONENTS
Page 106
COLLARS
Measure straight across from collar point to collar point.For button down, measure straight across from button center to button center.
CS-02 Collar Spread
Dillard'sProduct Development
Revised: 9/29/17
COMPONENTS
Page 107
COLLARS
Measure from cuff join seam to edge.
CF-01 Cuff Height
Dillard'sProduct Development
Revised: 6/19/18
COMPONENTS
Page 108
CUFFS
With cuff turned up, measure from edge to fold.
CF-02 Turn Up Cuff Height
Product Development
Revised 2/21/07
COMPONENTS
Page 109
CUFFS
At center of cuff, measure straight from center of button to outermost end of buttonhole, with cuff unbuttoned and flat or measured buttoned and X2.
CF-03 Sleeve Cuff Opening (Long)
Product Development
Revised 07/30/13
COMPONENTS
Page 110
CUFFS
CF-03 Sleeve Cuff Opening (Short)
At center of cuff, measure straight from center of button to outermost end of buttonhole with cuff unbuttoned and flat or measured buttoned and X2.
CF-04 Sleeve Cuff Opening to Second Button (Long)
Product Development
Revised 07/30/13
COMPONENTS
Page 111
CUFFS
CF-04 Sleeve Cuff Opening to Second Button (Short)
Measure at center from highest point to cuff join seam.
CF-05 Sleeve Placket Length
Product Development
Revised 2/21/07
COMPONENTS
Page 112
CUFFS
Measure at center from stitch to cuff join seam.
CF-06 Sleeve Placket Opening
Product Development
Revised 2/21/07
COMPONENTS
Page 113
CUFFS
At top of sleeve placket, measure straight across from edge to seam.
CF-07 Sleeve Placket Width
Product Development
Revised 2/21/07
COMPONENTS
Page 114
CUFFS
Measure straight across at center from join seam to edge.
CF-08 Sleeve Placket Width-Under Placket
Product Development
Revised 2/21/07
COMPONENTS
Page 115
CUFFS
For Rib: Measure at bottom edge from fold to fold.For Elastic: Measure at center of elastic from fold to fold.
CF-09F Cuff Opening-Rib/Elastic-RelaxedCF-09H Cuff Opening-Rib/Elastic-Relaxed-Half
Product Development
Revised 7/26/07
COMPONENTS
Page 116
CUFFS
Elastic
Rib
Extend garment as far as fabric will allow without overextending.For Rib: Measure at join seam from fold to fold.For Elastic: Measure at center of elastic from fold to fold.
CF-10F Cuff Opening-Rib/Elastic-ExtendedCF-10H Cuff Opening-Rib/Elastic-Extended-Half
Product Development
Revised 7/26/07
COMPONENTS
Page 117
CUFFS
Elastic
Rib
With cuff turned up, measure from edge to fold.
CF-12 Turn Up Cuff Height-Pant
Product Development
Revised 2/21/07
COMPONENTS
Page 118
CUFFS
Measure from cuff join seam to center of button.
CF-13 Button Placement-Sleeve Placket
Product Development
Revised 2/21/07
COMPONENTS
Page 119
CUFFS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch). Measure from opposite fold to ends of drawstrings.
DS-02 Drawstring Length-Neck
Product Development
Revised 2/21/07
COMPONENTS
Page 120
BELTSDRAWSTRINGS
LOOPS
Product Development
Revised 6/27/11
COMPONENTS
Page 121
BELTSDRAWSTRINGS
LOOPS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch).* Children Waist: Extend garment as far as fabric without over extending Measure from opposite fold to ends of drawstrings.
DS-03 Drawstring Length-Waist
Measure the distance from HPS to top of casing.
DS-04 Drawstring Placement from HPS-Waist
Product Development
Revised 2/21/07
COMPONENTS
Page 122
BELTSDRAWSTRINGS
LOOPS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch). Measure from opposite fold to ends of drawstrings.
DS-05 Drawstring Length-Sweep (Tops)
Product Development
Revised 2/21/07
COMPONENTS
Page 123
BELTSDRAWSTRINGS
LOOPS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch). Measure from string at opening to ends of drawstrings.
DS-06 Drawstring-Each Tie Length
Product Development
Revised 2/21/07
COMPONENTS
Page 124
BELTSDRAWSTRINGS
LOOPS
Fold garment in half so that the drawstring openings are together. Place drawstring ends together and keeping the casing flat, pull out all excess string (do NOT stretch). Measure from opposite fold to ends of drawstrings.
DS-07 Drawstring Length-Leg Opening-LongDS-08 Drawstring Length-Leg Opening-3/4 CapriDS-09 Drawstring Length-Leg Opening-Bermuda/KneeDS-10 Drawstring Length-Leg Opening-Short
Product Development
Revised 2/21/07
COMPONENTS
Page 125
BELTSDRAWSTRINGS
LOOPS
At the longest point, measure straight across from seam to seam.
GS-01 Gusset-Vertical Height
Product Development
Revised 11/23/11
COMPONENTS
Page 126
GUSSETS
At the widest point, measure straight across from seam to seam.
GS-02 Gusset-Horizontal Width
Product Development
Revised 11/23/11
COMPONENTS
Page 127
GUSSETS
Measure straight across from stitch to stitch at HPS.If multiple stitch lines, measure to outermost stitch line.
MW-01 Half Moon Width
Dillard'sProduct Development
Revised 3/26/19
COMPONENTS
Page 128
HALF MOON
Measure straight from Center Back neck join seam to stitching.If multiple stitch lines, measure to outermost stitch line.
MW-02 Half Moon Depth
Product Development
Revised 2/21/07
COMPONENTS
Page 129
HALF MOON
Measure at center from fold to fold.
HE-01F Headband Length RelaxedHE-01H Headband Length Relaxed-Half
Product Development
Revised 2/21/07
COMPONENTS
Page 130
HATSHEADBANDS
HOODS
Measure along fold from edge to edge.
HE-02 Headband Height
Product Development
Revised 2/21/07
COMPONENTS
Page 131
HATSHEADBANDS
HOODS
Extend headband as far as fabric will allow without overextending.Measure at center from fold to fold.
HE-03F Headband Length ExtendedHE-03H Headband Length Extended-Half
Product Development
Revised 2/21/07
COMPONENTS
Page 132
HATSHEADBANDS
HOODS
Measure at center from seam to seam.If no seam, measure from stitch line to stitch line.
HE-04 Headband Inset-Relaxed
Product Development
Revised 2/21/07
COMPONENTS
Page 133
HATSHEADBANDS
HOODS
Extend inset as far as fabric will allow without overextending.Measure at center from seam to seam.If no seam, measure from stitch line to stitch line.
HE-05 Headband Inset Extended
Product Development
Revised 2/21/07
COMPONENTS
Page 134
HATSHEADBANDS
HOODS
Place front and back opening edges together, measure straight from edge to fold.Place cap flat and measure straight from seam to bottom seam
HT-01 Hat Length-Top of Hat to EdgeHT-01 Cap Length- Top seam to bottom seam
Dillard'sProduct Development
Revised: 09/25/17
COMPONENTS
Page 135
HATS HEADBANDS
HOODS
Place front and back opening edges together, measure straight from fold to fold.
Dillard'sProduct Development
Revised: 9/22/17
COMPONENTS
Page 136
HATS HEADBANDS
HOODS
HT-02F Hat Width-at Edge-RelaxedHT-02H Hat Width-at Edge-Relaxed-HalfHT-02F Beret Opening-Edge to Edge
Lay Beret flat with opening facing up, measure edge to edge.
Beret
Place front and back opening edges together. Extend garment as far as fabric will allow without overextending.Measure straight from fold to fold.
HT-03F Hat Width-at Edge-ExtendedHT-03H Hat Width-at Edge-Extended-Half
Product Development
Revised 2/21/07
COMPONENTS
Page 137
HATSHEADBANDS
HOODS
Measure from edge to fold.
HT-04 Brim Rolled Height
Product Development
Revised 2/21/07
COMPONENTS
Page 138
HATSHEADBANDS
HOODS
With brim unrolled, measure from edge to join seam.
HT-05 Brim Un-Rolled Height
Product Development
Revised 2/21/07
COMPONENTS
Page 139
HATSHEADBANDS
HOODS
At widest point, measure from join seam to edge.
HT-06 Hat Visor-Height
Product Development
Revised 2/21/07
COMPONENTS
Page 140
HATSHEADBANDS
HOODS
Measure along join seam from edge to edge.
HT-07 Hat Visor-Length at Join Seam
Product Development
Revised 2/21/07
COMPONENTS
Page 141
HATSHEADBANDS
HOODS
Measure from edge to edge.
HT-08 Binding Height-Inside Hat
Product Development
Revised 2/21/07
COMPONENTS
Page 142
HATSHEADBANDS
HOODS
Measure straight across from join seam to join seam.Measure Pom straight from edge to edge.Measure Beret straight across from fold to fold.Measure Cap straight across from seam to seam
HT-09 Crown Width-Seam to SeamHT-09 Pom Diameter-Edge to EdgeHT-09 Beret Width- Fold to FoldHT-09 Cap Center Panel
Dillard'sProduct Development
Revised: 0925/17
COMPONENTS
Page 143
HATS HEADBANDS
HOODS
Beret
At widest point, measure from Center Back fold to edge.
HD-01 Hood Width-at Widest
Product Development
Revised 2/21/07
COMPONENTS
Page 144
HATSHEADBANDS
HOODS
Fold the hood at Center Back and match shoulder seams.Measure straight from HPS at neck join seam to fold.
HD-02 Hood Height-at HPS
Product Development
Revised 2/21/07
COMPONENTS
Page 145
HATSHEADBANDS
HOODS
HPS
At Center Back, measure along the curve from neck join seam to the edge.
HD-03 Hood Crown Length-Center
Product Development
Revised 2/21/07
COMPONENTS
Page 146
HATSHEADBANDS
HOODS
Measure from neck join seam to edge.
HD-04 Hood at CF Neck Height
Product Development
Revised 2/21/07
COMPONENTS
Page 147
HATSHEADBANDS
HOODS
Measure from Center Front neck join seam to fold.
HD-05 Hood Opening-Relaxed
Product Development
Revised 2/21/07
COMPONENTS
Page 148
HATSHEADBANDS
HOODS
Extend garment as far as fabric will allow without overextending.Measure from Center Front neck join seam to fold.
HD-06 Hood Opening-Extended
Product Development
Revised 2/21/07
COMPONENTS
Page 149
HATSHEADBANDS
HOODS
Fold garment in half so that the drawstring openings are together.Place drawstring ends together and keeping the casing flat, pull out allexcess string (Do NOT stretch).Measure from top of string at opening to ends of drawstrings.
HD-07 Hood Drawstring-Each Tie Length
Product Development
Revised 2/21/07
COMPONENTS
Page 150
HATSHEADBANDS
HOODS
Fold garment in half so that the drawstring openings are together.Place drawstring ends together and keeping the casing flat, pull out allexcess string (Do NOT stretch).Measure from top of fold to ends of drawstrings.
HD-08 Hood Drawstring Length Total
Product Development
Revised 2/21/07
COMPONENTS
Page 151
HATSHEADBANDS
HOODS
Measure at center from neck edge to bottom seam.If no seam, measure to stitch.
PL-01 Placket Length
Product Development
Revised 2/21/07
COMPONENTS
Page 152
PLACKETSZIPPERS
FLYS
Measure from edge to edge.
PL-02 Placket Width-Edge to Edge
Product Development
Revised 2/21/07
COMPONENTS
Page 153
PLACKETSZIPPERS
FLYS
Measure from edge to stitching.If multiple stitch lines, measure to outermost stitch line.
PL-03 Placket Width-Edge to Stitching
Product Development
Revised 2/21/07
COMPONENTS
Page 154
PLACKETSZIPPERS
FLYS
Measure from center of button to center of button.
PL-04 Button/Snap Spacing-Center to Center
Product Development
Revised 2/21/07
COMPONENTS
Page 155
PLACKETSZIPPERS
FLYS
Measure from center of button to bottom opening.
PL-05 Button/Snap Space-Center to Bottom Opening
Product Development
Revised 2/21/07
COMPONENTS
Page 156
PLACKETSZIPPERS
FLYS
Measure the width underlap edge to overlap edge.
PL-06 Front Overlap
Product Development
Revised 2/21/07
COMPONENTS
Page 157
PLACKETSZIPPERS
FLYS
CF
Measure opening from top to bottom.
PL-08 Slit/Keyhole Length
Product Development
Revised 2/21/07
COMPONENTS
Page 158
PLACKETSZIPPERS
FLYS
Measure from link stitch to end of double ply.
PL-09 Tubular Join Height
Product Development
Revised 2/21/07
COMPONENTS
Page 159
PLACKETSZIPPERS
FLYS
PLACKET COLLAR
Measure from seam to edge.Measure from stitchline to edge.Measure from edge to edge.
PL-10 Ruffle/Flounce Height
Product Development
Revised 30/08/09
COMPONENTS
Page 160
PLACKETSZIPPERS
FLYS
Measure from fold to fold at the join seam.For inverted, measure using the inside folds.
PD-01 Pleat Distance
Product Development
Revised 2/21/07
COMPONENTS
Page 161
PLEATS
Box Pleat Knife Pleat Inverted Pleat
Measure from inside fold to outside fold.
PD-02 Pleat Depth
Product Development
Revised 2/21/07
COMPONENTS
Page 162
PLEATS
Measure from the length of the topstitch from join seam to end of stitching.
PD-03 Pleat Stitch Down Length
Product Development
Revised 2/21/07
COMPONENTS
Page 163
PLEATS
Measure at center from edge to edge.
SP-01 Shoulder Pad/Patch Length
Product Development
Revised 3/26/09
COMPONENTS
Page 164
SHOULDER PADS
At widest point, measure from edge to edge.
SP-02 Shoulder Pad/Patch Width
Product Development
Revised 3/26/09
COMPONENTS
Page 165
SHOULDER PADS
At widest point, measure from edge to edge.
SP-03 Shoulder Pad Thickness
Product Development
Revised 2/21/07
COMPONENTS
Page 166
SHOULDER PADS
Measure straight across from inside edge of strap to inside edge of strap.
SS-01 Strap Spread at Join-Front
Product Development
Revised 2/21/07
COMPONENTS
Page 167
BIBSOVERALLS
STRAPS
Measure straight across from inside edge of strap to inside edge of strap.
SS-02 Strap Spread at Join-Back
Product Development
Revised 2/21/07
COMPONENTS
Page 168
BIBSOVERALLS
STRAPS
Measure at center from front join seam to back join seam.
SS-03 Strap Length-Seam to Seam
Product Development
Revised 2/21/07
COMPONENTS
Page 169
BIBSOVERALLS
STRAPS
Measure straight across from inside edge of strap to inside edge of strap at HPS.
SS-04 Strap Spread at HPS
Product Development
Revised 2/21/07
COMPONENTS
Page 170
BIBSOVERALLS
STRAPS
HPS
Adjust strap extension as specified.Measure at center from front join seam to back join seam.
SS-05 Strap Length with Adjustment
Product Development
Revised 2/21/07
COMPONENTS
Page 171
BIBSOVERALLS
STRAPS
Measure from adjustment end to fold of strap.
SS-08 Strap Adjustment
Product Development
Revised 2/21/07
COMPONENTS
Page 172
BIBSOVERALLS
STRAPS
Adjust strap extension as specified. Measure at center from join seam to fold or center of first button.
SS-09 Strap Length to Buckle EndSS-10 Strap Length to Center of First Button
Product Development
Revised 2/21/07
COMPONENTS
Page 173
BIBSOVERALLS
STRAPS
SS-11 Strap Adjustment
Dillard'sProduct Development
COMPONENTS
Page 174
BIBSOVERALLS
STRAPS
Measure from adjustment end to fold of strap
Revised: 01/15/15
Measure opening from top to bottom. Bartacks not included.
SV-01 Vent/Slit Length
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 175
VENTS
Measure from underlap edge to overlap edge, excluding seam allowance.
SV-02 Vent Overlap
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 176
VENTS
Measure from top of vent/slit to edge.
SV-03 Vent/Slit Length-Front
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 177
VENTS
Measure from top of vent/slit to bottom edge.
SV-04 Vent/Slit Length-Back
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 178
VENTS
Measure top layer from stitch line to edge.
SV-05 Vent Length
Dillard'sProduct Development
Revised 2/21/07
COMPONENTS
Page 179
VENTS
TI-01 Tie Length
TIES
Dillard'sProduct Development
Revised 11/20/07
Components
Measure from Apron to Tail
Apron
Tail
Tolerance -0/+1
Page 180
TI-02 Tie Width
Dillard'sProduct Development
Revised 2/27/08
Width- Wide end/Apron, Narrow end/Tail
Page 181
TIESComponents
TI-03-08 Tie Width- From Apron/Tail
TIES
Dillard'sProduct Development
Revised 10/8/18
COMPONENTS
Measure from Apron/Tail.
Apron
06-30" Width from Apron
05-24" Width from Apron
04-17" Width from Apron
03-10" Width from Apron
Tail07-3" Width from Tail
08-9" Width from Tail
Page 182
03-6" Width from Apron
07-4 1/2" Width from Tail
TI-09 Self Loop/Bar Tack from Apron/Tail
TIES
Dillard'sProduct Development
Revised 11/20/07
Components
Bar Tack from Apron/Tail, Top of self loop from Apron
Page 183
TI-10 Tipping
TIES
Dillard'sProduct Development
Revised 11/20/07
Components
Tipping extended into Tie at Apron/Tail
Page 184
TI-11 Interlining Edge
TIES
Dillard'sProduct Development
Revised 11/20/07
Components
Interlining edge to Apon/Tail
Page 185
TI-12 Width-from Apron/Tail
Dillard'sProduct Development
Revised 2/27/08
Measure from Apron/Tail at trim attach
Page 186
TIESComponents
Measure from HPS to yoke join seam.
YK-01 Front Yoke-HPS to Seam (Tops)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 187
YOKES
HPS
Measure from HPS to yoke join seam.
YK-02 Back Yoke-HPS to Seam (Tops)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 188
YOKES
HPS
Measure from Center Back neck join seam (neck edge if there is no collar) to yoke join seam.
YK-03 Yoke Height-CB (Tops)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 189
YOKES
Measure from Center Front neck join seam (neck edge if there is no collar) to yoke join seam.
YK-04 Yoke Height-CF (Tops)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 190
YOKES
Measure from waist join seam to yoke join seam.
YK-05 Yoke Height-CF (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 191
YOKES
Measure from waist join seam to yoke join seam.
YK-06 Yoke Height-CB (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 192
YOKES
Measure from waist join seam to yoke join seam.
YK-07 Yoke Height-Side (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 193
YOKES
Measure from top edge to yoke join seam.
YK-08 Yoke Height-CF Top Edge (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 194
YOKES
Measure from top edge to yoke join seam.
YK-09 Yoke Height-CB Top Edge (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 195
YOKES
Measure from top edge to yoke join seam.
YK-10 Yoke Height-Side Top Edge (Bottoms)
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 196
YOKES
Measure from HPS to yoke join seam at side neck.
YK-11 Yoke-at Neck
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 197
YOKES
Back View
Measure from fold to yoke join seam at mid shoulder.
YK-12 Yoke-at Mid Shoulder
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 198
YOKES
Back View
Measure from fold to yoke join seam at armhole.
YK-13 Yoke-at Armhole
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 199
YOKES
Back View
Measure from waist join seam to end of fly.If multiple stitchlines, measure to outermost stitch line.
FF-01 Fly Length-Below Band
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 200
PLACKETSZIPPERS
FLYS
Measure from last stitch row at waist to end of fly. If multiple stitchlines, measure to outermost stitch line.
FF-02 Fly Length-Waist Stitch
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 201
PLACKETSZIPPERS
FLYS
With zipper fully opened, measure from waist join seam to top of zipper slider.
FF-03 Fly Opening-Functional
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 202
PLACKETSZIPPERS
FLYS
Top of Zipper Slider
Measure from edge to stitch.If multiple stitchlines, measure to outermost stitch line.
FF-04 Fly Width-Edge to Outer Stitch
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 203
PLACKETSZIPPERS
FLYS
Measure from bottom stop to top stop.
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 204
PLACKETSZIPPERS
FLYS
ZP-01 Zipper Length-WaistZP-02 Zipper Length-Hip
With zipper opened, measure from top stop to top of slider.
ZP-03 Zipper Opening-Dress/Top
Dillard'sProduct Development
Revised 12/14/07
COMPONENTS
Page 205
PLACKETSZIPPERS
FLYS
With zipper opened, measure from top stop to top of slider.
ZP-04 Zipper Opening-Back-Pant/SkirtZP-05 Zipper Opening-Side-Pant/Skirt
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 206
PLACKETSZIPPERS
FLYS
Measure from bartack to bottom opening. If there is no bartack, measure from stitch line to bottom opening.
ZP-06 Zipper Length-Leg/Sleeve Opening
Revised 11/21/07
COMPONENTS
Page 207
PLACKETSZIPPERS
FLYS
Dillard’sProduct Development
With zipper opened, measure from top stop to top of slider.
ZP-07 Zipper Opening-Placket
Dillard'sProduct Development
Revised 11/21/07
COMPONENTS
Page 208
PLACKETSZIPPERS
FLYS
Measure straight down from opening to finger tip.
GL-01 Length from opening edge to finger tip
Dillard'sProduct Development
Revised: 9/25/17
COMPONENTS
Page 209
GLOVE
Measure palm width from edge to edge.
GL-02F Palm width edge to edgeGL-02H Palm width edge to edge-Half
Revised: 9/25/17 Page 210
GLOVE
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from join to finger tip.
GL-03 Thumb Length
Revised: 9/25/17 Page 211
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from join to finger tip.
GL-04 Mid-Finger length
Revised: 9/25/17 Page 212
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from finger tip to thumb join.
GL-05 Finger Tip to Thumb Length
Revised: 9/25/17 Page 213
Dillard'sProduct Development
COMPONENTS GLOVE
Measure opening edge to edge.
GL-06F Glove OpeningGL-06H Glove Opening-Half
Revised: 9/25/17 Page 214
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from opening to rib start.
GL-07 Cuff Rib Height
Revised: 9/25/17 Page 215
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from join to finger tip.
GL-08 Forefinger Length
Revised: 9/25/17 Page 216
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from join to finger tip.
GL-09 Third Finger Length
Revised: 9/25/17 Page 217
Dillard'sProduct Development
COMPONENTS GLOVE
Measure from join to finger tip.
GL-10 Small Finger Length
Revised: 09/25/17 Page 218
Dillard'sProduct Development
COMPONENTS GLOVE