Hi-Tech Projects,Oct’16, www.eiriindia.org # 03

JUST PREPARED NEW PROJECTS FOR YOU

Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994(RTGS/NEFT/IFSC Code: ICIC0000387)

WIRE NAILS [CODE NO.1891]Wire nail are used to join many things inindustries and in other domestic items. The aremade of hard carbon wire. They are headedon one end and sharp at another end. The headis used for hammering and sharp end help inpenetrating into the object which is to be joined.WIRE nail is one hardware that is used mainlyin Building construction work, manufacturingboxes for packing etc. due to the increasingpopulation and the necessities attached to it,they are always in demand in the market joinsmall items.

COST ESTIMATIONPlant Capacity 2.00 MT./dayLand & Building (250 Sq.Mtr) Rs. 30.00 LacsPlant & Machinery Rs. 20.45 LacsW.C. for 2 Months Rs. 54.25 LacsTotal Capital Investment Rs. 1.08 CrRate of Return 40%Break Even Point 54%******************************************************

AMUSEMENT PARK CUMWATER PARK (CODE NO.1892)

A water park is an amusement park thatfeatures water play areas, such as water slides,splash pads, spray grounds (waterplaygrounds), lazy rivers, or other recreationalbathing, swimming, and bare footingenvironments. Water parks in more currentstates of development may also be equippedwith some type of artificial surfing or bodyboarding environment such as a wave pool orFlow Rider. The Human life in cities is becomingmore and more mechanical because of noisepollution, environment pollution for relaxed andpeaceful environment, where leisure along withchildren and family. There are various sourcesof entertainment like cinema, circus, touristspots, videogame, orchestra etc. Amusementpark is the most popular entertaining place withthe latest technological developments, whichgives comfort, pleasure.

COST ESTIMATIONLand & Building (10 Acres) Rs. 9.46 CrPlant & Machinery Rs. 5.96 CrW.C. for 1 Month Rs. 20.51 LacsTotal Capital Investment Rs. 16.62 CrRate of Return 8%Break Even Point 78%*****************************************************

RE-BAR STEEL[CODE NO.1893]

A steel bar, usually with manufactureddeformations used in concrete and masonryconstruction to provide additional strength iscalled re-bar. Reinforcing bar, or rebar, is acommon steel bar that is hot rolled and is usedwidely in the construction industry, especiallyfor concrete reinforcement. Steel rebar is mostcommonly used as a tensioning devise toreinforce concrete and other masonrystructures to help hold the concrete in acompressed state. Concrete is a material thatis very strong in compression, but virtuallywithout strength in tension. To compensate for

this imbalance in a concrete slab's behavior,reinforcement bar is cast into it to carry thetensile loads.

COST ESTIMATION (US$)Plant Capacity 500.00 MT./dayLand & Building (12000 Sq.Mtr) US$ 11.99 ThPlant & Machinery US$ 21.66 ThW.C. for 2 Months US$. 1.53 CrTotal Capital Investment US$ 1.90 CrRate of Return 52%Break Even Point 27%*****************************************************

OXYGEN PLANT 200 TONS PERMONTH CAPACITY[CODE NO.1895]

Oxygen, the gaseous element that constitutes20.946% of the earth's, atmosphere, isessential to respiration and life in all animalsand to most forms of vegetation. Oxygensupports the combustion of feels which supplymankind with heat, light and power, and itenters into oxidative Combination with manymaterials. The speed of reaction andeffectiveness of combination increases withoxygen concentrations greater than that of airIndustry has established 99.5% purity for thebulk commercial product. The great importanceof the industrial gas, oxygen is due to theusefulness of the acetylene torch for steelwelding and steel cutting, and for the weldingof other metals, to lesser degree to theoxyhydrogen flame. Oxygen gas in thebreathing apparatus for a visitors at highaltitudes and for oxygentents in hospitals is ahigh altitudes and for oxygentents in hospitalsis a more recent development.

COST ESTIMATIONPlant Capacity 8.00 MT/dayLand & Building (2 Acres) Rs. 4.25 CrPlant & Machinery Rs. 4.00 CrW.C. for 3 Months Rs. 91.72 LacsTotal Capital Investment Rs. 12.51 CrRate of Return 15%Break Even Point 67%******************************************************

LARGE MULTIPURPOSE (MEAT,FISH, VEGETABLES ANDFRUITS) COLD STORAGEPLANT OF A CAPACITY

APPROX. 2000 MT.[CODE NO 1896]

All fruits and vegetables require specializedpost harvest treatment, appropriatetemperature and relative humidity for theirstorage. Establishment of cold storage providesrefrigerated storage and preservation facilitiesfor several fruits, vegetables & flowers.Because of technology advancements andlogistic strategies, the cold storage ofperishable items has become an importantstage in the distribution betweenmanufacturers/ processors and retail locations.The cold storage will ensure the increasedavailability and improved quality of high valueperishable fruits and vegetables for both exportand local sale, which would otherwise perishor deteriorate. This project is designed forstoring of potatoes and apples/ kinnu etc. but

it can be used to store multiple products, storedin different compartments of the unit, whererelative temperatures for respective productscan be maintained. The major clientele of thisbusiness will be the export houses and the localtrading and marketing units of potato and apple/kinnu. The project will further aim at storingfruits & vegetables even during off-seasons.The project will ultimately assist the clientelein maintaining market price equilibriumthroughout the year for potatoes.

COST ESTIMATIONPlant Capacity 2000 MT.Land & Building (5000 Sq.Mtr) Rs. 4.39 CrPlant & Machinery Rs. 1.96 CrW.C. for 1 Month Rs. 10.77 LacsTotal Capital Investment Rs. 6.62 CrRate of Return 18%Break Even Point 59 %******************************************************

COPPER POWDER BYELECTROLYTIC PROCESS

[CODE NO.1897]Copper Powder is the basic raw material formany of the sintered products. These productsfind their uses in aircrafts, space crafts, partsfor guns, porous metal bearings, filter gasdiffusers, welding rods, bimetallic strips andelectrical parts. The usage of copper powderhas increased manifold by virtue of its physicalproperties, long life high scrap value and widerange of uses. Next to iron and steel, it is widelyused in the market.

COST ESTIMATIONPlant Capacity 3.50 MT/dayLand & Building (2000 Sq.Mtr) Rs. 1.92 CrPlant & Machinery Rs. 47.00 lACSW.C. for 2 MonthS Rs. 9.40 CrTotal Capital Investment Rs. 11.94 CrRate of Return 74%Break Even Point 24%******************************************************

CORRUGATED BOARD ANDBOXES (AUTOMATIC PLANT)(USING CHINA MACHINES)

[CODE NO.1898]The materials now available for packaging arepaper and paper products, metal containersand foils, glass, plastics-rigid and flexible,cellulosic films, textiles including jute, wovenplastics and wood. Among the packagingmaterials, paper and paper based productscontinue to occupy a predominent place. Paperbased materials used for packaging includebleached and unbleached kraft, corrugated andsolid fiber boards and a large variety ofconverted items like wax coated, plastic coated,bitumen coated etc. Corrugated and solid fibreboard boxes have replaced the conventionalwooden boxes as transport containers becauseof their light weight and satisfactory strength.There are, however, several areas in which thissector is laggin behind the developed countries;they include mainly production of parchmentpaper for use in packaging of biscuits etc. SackKraft paper and high strength Kraft forproducing corrugated fibre board of goodstrength characteristics. Packaging has been

Top Industries to Start

Hi-Tech Projects,Oct’16, www.eiriindia.org # 04

01. DETERGENT POWDER(EXPORT ORIENTED UNIT)

02. DETERGENT WASHING POWDER(ARIEL TYPE)

03. DETERGENT PASTE(TEXTILE GRADE)

04. DETERGENT (ANIONIC)05. DETERGENT CAKE & POWDER06. (IDET 10) DETERGENT

CONCENTRATE07. LIQUID DETERGENTS FOR WOOL08. LAUNDRY SOAP FROM SOAP

FLAKES09. LIQUID SOAP10. LIQUID TOILET CLEANER

(HARPIC TYPE)11. METAL POLISH SOAP12. NEROL LAUNDRY SOAP13. NON-IONIC LIQUID DETERGENTS14. PHENYL15. SYNTHETIC DETERGENT

(BLUE POWDER)16. SCOURING POWDER CLEANING

POWDER (VIM TYPE)17. SCOURING BAR18. SOAP COATED PAPER19. SHAVING CREAM20. TOILET SOAP INDUSTRY

(SOAP FROM SOAP STOCK)21. TOILET SOAP FROM SOAP

NOODLES22. ULTRA MARINE BLUE (LIQUID)23. WASHING & LAUNDRY SOAP24. ZEOLITE-A (FOR DETERGENT)

Each Project Report covers in this CD containsIntroduction, Uses, Market, Process withProduct Formulae, Suppliers of Plant andEquipments, Cost Economics with ProfitabilityAnalysis, BEP, Resources of Finance etc.

Ask for Price of this CD containing all above24 Project Reports. Payable fully in advancethrough Draft/M.O. in favour of ENGINEERSINDIA RESEARCH INSTITUTE, DELHI.Delivery within 1 day. (To Order please dial :98114-37895).

assuming importance in the context of growthof industries in general and consumerindustries in particular. Paper is one of the mostimportant materials that enters packaging.Paper is extensively used for making boxes,bags, sealing tapes, drums and tubes and ascushioning materials. Paper makers in thecountry are becoming conscious of the needsof container industry and are working toimprove the existing qualities. In India textile,tea, tobacco and coffee are probably the largestconsumers of papers. Out of the total paperproduction about 35 per cent goes to thepackaging industry. With the advancement ofindustry, the production of paper and paperboard is bound to increase, and the majorincrease will be in the field of packaging papersand boards. Paper is intact replacing the oldermaterials used for packaging. In addition, paper

in packaging is economical; light easy to handleand superior. Corrugated boxes and solid fibrecontainers are extensively being used in placeof wooden boxes.

COST ESTIMATIONPlant Capacity 25.00 Ton/dayLand & Building (5000 Sq.Mtr) Rs. 3.50 CrPlant & Machinery Rs. 4.88 cRW.C. for 1 Month Rs. 5.66 CrTotal Capital Investment Rs. 14.13 CrRate of Return 26%Break Even Point 54%****************************************************

MAIZE PROCESSING PLANT(300 Ton/Day) [CODE NO. 1605]

Starch is an abundant carbohydrate distributedworldwide in plants. Starch has been a majoringredient in man's diet over the centuries. Inaddition it has become a major industrial rawmaterial. Plant seeds, roots and tubers are allsources of industrial starch production. Thecommercial realities of the starch recoveryprocess limit the industrial sources mainly towheat, maize and tapioca. Indian starchindustry mainly consumes maize as input rawmaterial.

COST ESTIMATIONPlant Capacity 300 Ton Maize/DayLand & Building (20 Acres) Rs.21.87 CrPlant & Machinery Rs. 64.55 CrW.C. for 2 Months Rs. 26.07 CrTotal Capital Investment Rs. 1.13 ArabRate of Return 58%Break Even Point 33%*******************************************************

TMT ROLLING MILL[CODE NO. 1900]

The full form of TMT is Thermo MechanicalTreatment; in this the steel bars are passedthrough a specially designed water-coolingsystem. After the bars pass, the outer surfaceof the bars solidifies while the core remainshot. This creates a temperature gradient in thebars. After the intensive cooling, the bar isexposed to air and the core re-heats thequenched surface layer by conduction,therefore tempering the external marten site.When the bars are taken out of the coolingsystem, the heat flows from the core to theouter surface, further tempering of the bars,which helps them attain higher yield strength.The resulting heat-treated structure impartssuperior strength and toughness to the bars.Cooling process is illustrated below: The pre-determined cooling of the bar peripherytransforms the peripheral structure to martensite and then annealed through the heatavailable at the core. The peripheral and coretemperature difference finally equalizes ataround 600 degree C and the resultant barstructure is of tempered marten site at theperiphery and of fine-grained ferritepearlite atthe core. Generally speaking, the resultant softcore forms about 65-75 per cent of the area(depending upon the desired minimum yieldstrength) and the rest is the hardenedperiphery. The equalizing temperature togetherwith the final rolling temperature is the most

important parameter to achieve the requiredmechanical properties. Finally, when the baris discharged on to the Cooling Beds, theremaining austenite transforms into a very fine-grained pearlite structure. After this process ofthermo mechanical treatment, a dark etchedperipheral rim of tempered marten site and agrey core of ferrite pearlite get formed. Thetempered marten site surface layer is very hardwhile the microstructure of the core is a veryfine-grained ferrite and pearlite which is quitesoft. The result is a structure withigh yieldstrength combined with high ductility. Hencefrom the above data it is seen that the suddenquenching is the key role in hardening the steelbars. The pressure of the water jets on the hotmolten bars determines the thickness of themartensite structure and is controlled for therequired hardness.

COST ESTIMATIONPlant Capacity 480.00 MT./dayLand & Building (12000 Sq.Mtr) Rs. 7.42 CrPlant & Machinery Rs. 12.49 CrW.C. for 2 Months Rs. 99.10 CrTotal Capital Investment Rs. 120.00 CrRate of Return 42%Break Even Point 40%******************************************************

PVC SOLVENT CEMENTS(uPVC & cPVC)

[CODE NO. 1901]The operation of solvent cement may bebroadly defined as the formation of a Jointwhere in a self bond between two polymericcomponent is promoted by the presence of asolvent in temporarily high concentration. Theonion between two parts of a Joint is broughtwith the aid of solvents, solvent cement oradhesives. The type of joint best suited tosolvent bonding is a lap joint. The nutuod innot normally used for but. Joint where theseare likely to experience significant stresses.The essential features of bond formation in thismethod are the intes diffusion of polymermolecules across the original interfacebetween the two components of the joint, andthe promotion and acceleration of thisprocess by the swelling of the polymer of thejoint components at the clubface, caused bysorption of the solvent. The solventconcentration in the polymer, originally high,is ultimately reduced to a lord constant valuemainly the further penetration inwards andalso by evaporation from the edges of thebond zone.

COST ESTIMATIONPlant Capacity 2.00 TON/dayLand & Building (800 Sq.Mtr) Rs. 1.06 CrPlant & Machinery Rs. 45.00 LacsW.C. for 1 Month Rs. 72.35 LacsTotal Capital Investment Rs. 2.30 CrRate of Return 33%Break Even Point 49%*****************************************************Patrons, deposit amount in EIRI

Account ICICI BANK LTD. CA-038705000994 (RTGS/NEFT/IFSC

Code: ICIC0000387)

Hi-Tech Projects,Oct’16, www.eiriindia.org # 05

Start Your Own IndustryBARLEY MALT [EIRI-1607]

Malt is germinated cereal grains that havebeen dried in a process known as “malting”.The grains are made to germinate by soakingin water, and are then halted from germinatingfurther by drying with hot air. Malting grainsdevelops the enzymes required to modify thegrain’s starches into sugars, including themonosaccharide glucose, the disaccharidemaltose, the trisaccharide maltotriose, andhigher sugars called maltodextrines. It alsodevelops other enzymes, such as proteases,which break down the proteins in the grain intoforms that can be used by yeast.

Cost EstimationPlant Capacity 50 MT./DayLand & Building (2.5 Acres) Rs. 5.77 Cr.Plant & Machinery Rs. 10 Cr.W.C. for 1 Months Rs. 2.71 Cr.Total Capital Investment Rs. 19.33 Cr.Rate of Return 23%Break Even Point 60%********************************************************

ORTHOPAEDIC IMPLANTS ANDINSTRUMENTS [EIRI-1606]

Orthopedic implants can be defined asmedical devices used to replace or providefixation of bone or to replace articulatingsurfaces of a joint. In simpler words, orthopedicimplants are used to replace damaged ortroubled joints. The implant surgeries areperformed only by highly specialized andtrained surgeons. The surgical procedures foreach implant involves removal of the damagedjoint and an artificial prosthesis replacement.

Cost EstimationLand & Building (1000 sq.mt.) Rs. 3.25 Cr.Plant & Machinery Rs. 7.82 Cr.W.C. for 3 Months Rs. 1.24 Cr.Total Capital Investment Rs. 13.07 Cr.Rate of Return 26%Break Even Point 56%*******************************************************

MAIZE PROCESSING PLANT(Starches / Modified starches/ Liquid

glucose / Dextrose Monohydrate /Glucose Syrups / Corn Syrup solids /

High Maltose Corn syrups / MaltoDextrine Powder / Corn Gluten Meal

(60%) Maize Oil / Sorbitol) [EIRI-1605]

Starch is an abundant carbohydrate distributedworldwide in plants. Starch has been a majoringredient in man’s diet over the centuries.Maize starch is produced by the wet millingprocess, which involves grinding of softenedmaize and separation of corn oil seeds(germs), gluten (proteins), fibers (husk) andfinally pure starch.

Cost EstimationPlant Capacity 300 TonsLand & Building (20 Acres) Rs. 21.88 Cr.Plant & Machinery Rs. 64.55 Cr.W.C. for 2 Months Rs. 26.08 Cr.Total Capital Investment Rs. 113.91 Cr.Rate of Return 58%Break Even Point 34%*******************************************************

TMT STEEL BARS [EIRI-1604]Thermo mechanically treated (TMT) steel, canbe described as a new-generation-high-strength steel having superior properties suchas weldability, strength, ductility and tensility,which meet the highest international qualitystandards. Under thermo mechanicaltreatment (TMT), the steel bars are passedthrough a specially designed water-coolingsystem where they are kept till the outersurface of the bars becomes colder while thecore remains hot. This creates a temperaturegradient in the bars. When the bars are takenout of the cooling system, the heat flows fromthe core to the outer surface, further temperingof the bars, which helps them attain a higheryield strength. The resulting heat-treatedstructure imparts superior strength andtoughness to the bars. The microstructure ofthe core is a very fine-grained ferrite andpearlite. TMT bars are also known as’quenched and tempered rebarsbecause of thequenching and tempering processes involvedin making the bars. The production of qualityTMT bar depends on three major factors -quality raw materials, a properly designed andautomated mill and a well-designedquenching and tempering technology. Allrebars must be purchased based on theproperties of yield strength, tensile strengthand elongation values.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (3 Acres) Rs. 3.18 Cr.Plant & Machinery Rs. 7.18 Cr.W.C. for 1 Months Rs. 9.10 Cr.Total Capital Investment Rs. 20.61 Cr.Rate of Return 51%Break Even Point 48%*******************************************************

CHELATED ZINC (ZN-EDTA)(12%) [EIRI-1603]

Zinc EDTA is a derivative of Ethylene diamineTetra acetic Acid. Ethylene diamine Tetra aceticAcid is a Sequestering/ Chelating Agent. EDTAis a synthetic amino acid. It is widely known asEDTA. It is a white powder. EDTA Acid isinsoluble in water. It is also named as Ethylenediamine Tetra acetate. It is widely used todissolve Metallic Impurities. There are variousSalts/ Derivatives of EDTA. EDTA is widelyrecognized as effective Sequestering Agent.EDTA grabs metallic cation such as Lead orCalcium from the process and forms a stablecompound that is then excreted from thesystem. The stability of this bond is vital to getthe success in removing the inorganicimpurities out of the system. If the bond is weak,other chemicals can break this bond to formtheir own compounds.

Cost EstimationPlant Capacity 1.50 MT./DayLand & Building (1000 sq.mt.) Rs. 1.52 Cr.Plant & Machinery Rs. 50 LacsW.C. for 1 Months Rs. 70 LacsTotal Capital Investment Rs. 2.82 Cr.Rate of Return 19%Break Even Point 60%*******************************************************

1. AUTO BULBS/LAMPS2. AUTO CLUTCH PLATE3. AUTO CABLES4. AUTO PISTONS5. AUTO VEHICLES BODY

BUILDING AND SERVICING6. AUTO BRAKES SYSTEM7. AUTO TUBES8. AUTO RUBBER MOULDING

PARTS & STEEL JACKS9. AUTO HEAD LIGHT10. AUTO ELECTRICAL PARTS

(ARMATURE)11. AUTOMOBILE GEARS12. AUTOMOBILE PARTS13. AUTOMOBILE PAINTS14. AUTOMOBILE SERVICE STATION15. AUTOMOBILE POLISH16. AUTOMOBILE INJECTION MOULDED

PLASTIC COMPONENTS17. AUTOMOBILE PISTON RINGS18. BATTERY PLATES19. C.N.G KIT FOR AUTOMOBILE20. C.N.G. CYLINDER

(COMPRESSED NATURAL GAS)21. CLUTCH PLATE FOR AUTOMOBILES22. CRUDE OIL BLEACHING FOR

PETROLEUM JELLY23. DOOR VISORS FOR AUTO VEHICLES24. ELECTRICAL HORN FOR

AUTOMOBILE25. IGNITION COIL FOR AUTOMOBILES26. MUFFLER AND SILENCER FOR FOUR

WHEELERS27. N.C. THINNERS USED IN AUTO PARTS28. PETROL PUMP WITH AUTOMOBILE

WORKSHOP/GARAGE & SERVICECENTRE

29. PISTON ASSEMBLY (ALUMINIUMALLOY)

30. PVC BATTERY CONTAINERS MFG.AND ASSEMBLING OF LEAD-ACIDSTORAGE BATTERY

31. RUBBER AUTO PARTS32. RUBBER POWDER33. RUBBER AUTO GASKETS34. RUBBER HOSES FOR AUTOMOBILES35. STORAGE BATTERY36. SOLUTION FOR STORAGE BATTERY37. TIE - ROD ENDS 38. TYRE & TUBES39. TOUGHENED GLASS40. TYRE RETREADING BY COLD

PROCESS41. UJ-CROSS & KING PIN FOR

AUTOMOBILE42. V-BELTS43. WHEEL RIMS (FOR CAR, MOTOR

CYCLES, TRUCKS ETC.)Each Project Report covers in this CD containsIntroduction, Uses, Market, Process with ProductFormulae, Suppliers of Plant and Equipments, CostEconomics with Profitability Analysis, BEP,Resources of Finance etc.Ask Price of this CD containing all above 43 ProjectReports. Payable fully in advance through Draft/M.O. in favour of ENGINEERS INDIA RESEARCHINSTITUTE, DELHI. Delivery within 1 day. (ToOrder please dial : 98114-37895).

Hi-Tech Projects,Oct’16, www.eiriindia.org # 06

Start Your Own Industry

Patrons, deposit amount in EIRI AccountICICI BANK LTD. CA-038705000994

(RTGS/NEFT/IFSC Code: ICIC0000387)

COPPER SULPHATE FROMCOPPER ASH/SCRAP

[EIRI-1602]Copper sulphate is a well known compoundof copper. The commercial name of thiscompound is Blue Vitriol. Blue stone orchalcantihite. Copper sulphate is used incopper plating, as a mordant in dyeing, as alaboratory reagent, in electric batteries, inproduction of others salts, as germicide andinsecticide in leather industry pulp in pigmentsin the preservation of wood, pulp and groundpulp in the process of engraving andlithography in ore flotation, destroying largeand low roms of animal life from drinking water,in petroleum industry synthetic rubber, steelmanufacture etc. Various forms of coppersulphate are available in the market arepresent. These forms are classified accordingto this water if crystallization of copper sulphateanhydrous copper sulphate is blue colouredpowder. From commercial point of view coppersulphate has the great importance of all copperchemicals based on tonnage alone.

Cost EstimationPlant Capacity 5 MT./DayLand & Building (1500 sq.mt.) Rs. 1.27 Cr.Plant & Machinery Rs. 49 LacsW.C. for 3 Months Rs. 3.14 Cr.Total Capital Investment Rs. 5 Cr.Rate of Return 46%Break Even Point 35%*******************************************************

G.I.WIRE AND M.S.BINDINGWIRE [EIRI-1601]

Mild Steel Galvanized steel wire popularlyknown as galvanized wire have extensiveapplication in various field. It has got excellentdemand in pre-stressed concrete product likerailway sleeper, telegraph and telephone,electr ic pole etc. and also find ampleapplication in pre-casted cement product likepipes, frames of door and windows etc. On theother hand it has its own market in the fieldof strands and also its domestic demandcannot be ignored. The M.S. Wire are drawn torequired dia and then galvanized i.e. coatingof zinc is employed on it, gives excellent anticorrosion property to steel wire. Barbed wire,fence wire usually consisting of two longitudinalwires twisted together to form cable and havingwire barbs wound around either or both of thecable wires at regular intervals. The varietiesof barbed wire are numerous, with cables beingsingle or double, round, half-round, or flat andhaving a range of gauges.

Cost EstimationPlant Capacity 8 MT./DayLand & Building (4000 sq.mt.) Rs. 2.38 Cr.Plant & Machinery Rs. 1.68 Cr.W.C. for 2 Months Rs. 2.59 Cr.Total Capital Investment Rs. 6.95 Cr.Rate of Return 27%Break Even Point 58%********************************************************

GREASE MANUFACTURING[EIRI-1600]

These consist of a dispersion of a metallic soapin a lubricating oil and vary from mobile ligandsto hard solids. Sodium or Calcium soaps aremore commonly employed but for specialpurposes aluminium or lithium soaps are used.Greases are used for lubricating bearings andother moving parts where lube oil would beunsuitable. Primary components of greasesare mineral oils & soaps. The oil consists ofvarying proportions of paraffinic naphthenicand aromatic hydrocarbon. Soaps used ingrease may be derived from animal orvegetable oils or fatty acids, wool grease, resinor petroleum acids. apart from this variety ofother compounds are added to lubricatinggreases to improve specific properties.suchcomponents are corrosion and rust inhibiton,and wear prevention agents. a grease thusproduced is properly thicked in order that itremains in contact with the moving surfacesand does not leak out under pressure. Greaseacts as a seal against dirt, dripping andspattering is eliminated, minimizes startingfrictions.

Cost EstimationPlant Capacity 1 MT./DayLand & Building (1000 sq.mt.) Rs. 1.50 Cr.Plant & Machinery Rs. 32 LacsW.C. for 3 Months Rs. 55 LacsTotal Capital Investment Rs. 2.46 Cr.Rate of Return 31%Break Even Point 49%*********************************************************

G.I.WIRE AND BARBED WIRE[EIRI-1599]

Mild Steel Galvanized steel wire popularlyknown as galvanized wire have extensiveapplication in various field. It has got excellentdemand in pre-stressed concrete product likerailway sleeper, telegraph and telephone,electr ic pole etc. and also find ampleapplication in pre-casted cement product likepipes, frames of door and windows etc. On theoher hand it has its own market in the fieldof strands and also its domestic demandcannot be ignored. The M.S. Wire are drawnto required dia and then galvanized i.e. coatingof zinc is employed on it, gives excellent anticorrosion property to steel wire. Barbed wire,fence wire usually consisting of two longitudinalwires twisted together to form cable and havingwire barbs wound around either or both of thecable wires at regular intervals. The varietiesof barbed wire are numerous, with cables beingsingle or double, round, half-round, or flat andhaving a range of gauges. The twisted doublecable provides extra strength and permitscontraction and expansion without breakage.

Cost EstimationPlant Capacity 8 MT./DayLand & Building (4000 sq.mt.) Rs. 2.92 Cr.Plant & Machinery Rs. 1.39 Cr.W.C. for 2 Months Rs. 2.59 Cr.Total Capital Investment Rs. 7.20 Cr.Rate of Return 22%

Break Even Point 62%

*******************************************

DIRECT FILLED BALL PEN(USE AND THROW) [EIRI-1556]

Direct Filled Ball Pens are manufacturedgenerally from plastic in different varieties tocope with demand of different classes ofpeople. Majority of people in India like mediumvariety Ball pen. Plastics are accepted byengineers as important new materials. Theseare derived from petroleum oil, salt, air andwater during the last 5 to 10 year considerableprogress has been made in plastic mouldingand extrusion. The plastic which becomes softwhen heated and harden when cooled arethermoplastics. Since they under go basicchemical change during forming.

Cost EstimationPlant Capacity 30,000 Nos/DayLand & Building (1000 sq.mt.) Rs. 1.46 Cr.Plant & Machinery Rs. 69 LacsW.C. for 3 Months Rs. 31 LacsTotal Capital Investment Rs. 2.56 Cr.Rate of Return 18%Break Even Point 64%********************************************************

SOLVENT EXTRACTION ANDOIL REFINERY CUM

PACKAGING OFRICE BRAN OIL [EIRI-1555]

The structure of the rice kernel is illustrated inThe bran fraction, which includes the germ orembryo in most commercial milling operations,represents only about 8% of paddy weight butcontains about three-fourths of the total oil.Containing about 15-20% oil (the same generalrange of soybeans), rice bran is commerciallyfeasible for oil extraction.

Cost EstimationPlant Capacity 50 MT./DayLand & Building (2 Acres) Rs. 37 LacsPlant & Machinery Rs. 1.35 Cr.W.C. for 1 Months Rs. 2.16 Cr.Total Capital Investment Rs. 4.09 Cr.Rate of Return 78%Break Even Point 32%********************************************************

PETROL PUMP CUM MODERNAUTOMOBILE WORKSHOP

SERVICE STATION WITHMODERN EQUIPMENTS ANDCOMPUTERISED MACHINE

[EIRI-1554]Petrol pump is small initiator of petrol industryor authorized agent of petrol to supply ofpetroleum product to the general people thoseare used L.C.V. and H.C.V. In petrol pump thereis also repairing and maintenance work isgoing on. Petrol pump is the procedure ofagency from Indian oil corporation Ltd., orBharat Petroleum refinery limited or any otherrefinery agency.

Cost EstimationLand & Building (8000 sq.mt.) Rs. 5.52 Cr.Plant & Machinery Rs. 1.23 Cr.Total Capital Investment Rs. 8.72 Cr.Rate of Return 14%Break Even Point 65%*******************************************************

Top Industries to Start

Hi-Tech Projects,Oct’16, www.eiriindia.org # 07

DISPOSABLE SYRINGES &NEEDLE PLANT (SINGLE USE

SYRINGES, SINGLE USENEEDLES & AS SYRINGES)

[EIRI-1553]Disposable Plastic Syringes are being used bydoctors to inject medicines through Intravenousor intramuscular ways for the treatment ofdiseases & also by research & developmentpersonnel. Disposable syringes are made ofplastic material and are used in the field ofmedical and veterinary science. Due to theiravailability in sterilized condition, ready to use,and cost effectiveness, disposable syringes arefast replacing the age old glass syringes.Moreover, the horror of AIDS worldwide hasalmost dispensed with the reuse of syringesand the demand of disposable syringes hasincreased phenomenally. Disposable syringesare mostly injection moulded frompolypropylene. Syringes are available in sizesof 1 ml, 2 ml, 5ml and 10ml, 50ml in a variety ofdesigns and consist of either two or threecomponents construction.

Cost EstimationCap. 8,75,000 Nos. Syringes (2ml-5ml)/Month 3,75,000 Nos. Syringes (20-30ml)/Month 2,50,000 Nos. Dis. Needle/MonthLand & Building (1500 sq.mt.) Rs. 2.12 Cr.Plant & Machinery Rs. 1.62 Cr.W.C. for 3 Months Rs. 1.60 Cr.Total Capital Investment Rs. 5.57 Cr.Rate of Return 22%Break Even Point 62%*******************************************************

P.V.C. BATTERY SEPARATOR[EIRI-1552]

Amongst the various systems and devices thatare available for converting electrical energyto some form of storage energy for reconversionto electrical energy, lead storage battery is themost effective system available. The use ofstorage batteries is far and wide, and mainly inthe field of automobile, telephone exchange,submarines, aircrafts etc. Before 1946, mostseparators used in storage batteries were ofwood and since then, these have been replacedeither by PVC or micrporous rubber which arehighly suitable. Sintered microporous PVCbattery separators are the separators used inthe storage batteries all over the world forenhancing the life and quality of the battery. Thefunction of a separator is to isolate the positiveand negative plates in a battery by providing aperfect insulation, these preventing short circuitin them. At the same time the separatorsfunction as a permeable membrane so as toeffect circulation of the electrolytes for thechemical reactions and free ionic flow.

Cost EstimationPlant Capacity 50,000 Nos/DayLand & Building (1500 sq.mt.) Rs. 1.29 Cr.Plant & Machinery Rs. 60 LacsW.C. for 2 Months Rs. 51 LacsTotal Capital Investment Rs. 2.71 Cr.Rate of Return 31%Break Even Point 57%*******************************************************

GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

[EIRI-1551]Glass is one of man’s most valuable andversatile materials. About 700 different glasscompositions are in commercial use. These arefabricated into tens of thousand of differentarticles that have combinations of propertiesfor about a thousand essentially different uses.Glass ware manufacturing occupies animportant role in the glass manufacturingindustry.

Cost EstimationPlant Capacity 25 MT./DayLand & Building (6000 sq.mt.) Rs. 8.05 Cr.Plant & Machinery Rs. 3.16 Cr.W.C. for 3 Months Rs. 2.31 Cr.Total Capital Investment Rs. 13.93 Cr.Rate of Return 32%Break Even Point 49%*******************************************************

ALUMINIUM ALLOY PLANT[EIRI-1550]

Aluminium alloys are alloys in which aluminium(Al) is the predominant metal. The typicalalloying elements are copper, magnesium,manganese, silicon and zinc. There are twoprincipal classifications, namely casting alloysand wrought alloys, both of which are furthersubdivided into the categories heat-treatableand non-heat-treatable. About 85% ofaluminium is used for wrought products, forexample rolled plate, foils and extrusions. Castaluminium alloys yield cost-effective productsdue to the low melting point, although theygenerally have lower tensile strengths thanwrought alloys.

Cost EstimationPlant Capacity 100 MT./DayLand & Building (2500 sq.mt.) US$ 3.24 Th.Plant & Machinery US$ 3.44 Th.W.C. for 2 Months US$ 1.03 Cr.Total Capital Investment US$ 1.10 Cr.Rate of Return 101%Break Even Point 20%********************************************************

KRAFT PAPER USING WASTEPAPER & OLD CORRUGATED

CARTONS [EIRI-1549]Paper form a commodity of prime importanceto day from the par ts of view of masscommunication, education and industrial andeconomic growth. The art of paper making wasfirst discovered in China in and around 2ndcentury. B.C. pan where it travelled slowly westward and reached the prantiens of Europe. Bythe end of 14th century, a member of papermill existed in Europe, particularly in Spain,Italy, France and Germany. the invention ofprinting in 1956 brought a vastly in creaseddemand for paper, and paper-manufacturingwas introduced to England. America followedin 1690. Agricultural residues, such as bagasse,rice husk, wheat husk jute sticks, grasses, etcare fast becoming popular materials for papermaking. considerable attention is being givento the utilization of various agricultural by

products for preparing pulp for papermanufacture landable efforts are being makein this direction. Paper production requires adisintegration of the bulky fibrous material toindividual or small agglomerate fibres.

Cost Estimation (Rupees in Lacs)Plant Capacity 100 MT/DayLand & Building (16 Acres) Rs. 3,195 LacsPlant & Machinery Rs. 5,100 LacsW.C. for 3 Months Rs. 2,442 LacsTotal Capital Investment Rs. 11,051 LacsRate of Return 36%Break Even Point 49%********************************************************

WALNUT PROCESSING PLANT[EIRI-1548]

A walnut is an edible seed of any tree of thegenus Juglans, especially the Persian alnut,Juglans regia. Broken nutmeats of the easternblack walnut, from the tree Juglans nigra, arealso commercially available in small quantities,as are foods prepared with butternut nutmeats.Walnut seeds are high density source ofnutrients, particularly proteins and essentialfatty acids. Walnut seeds, like other tree nuts,must be processed and stored properly. Poorstorage makes walnut seeds susceptible toinsect and fungal mold infestations; the latterproduces aflatoxin - a potent carcinogen. Moldinfested walnut seed batch should not bescreened then consumed; the entire batchshould be discarded. In certain parts of theworld, walnuts are locally known as waln|sse,noix, nuz, nuc, akhar, kurumi.

Cost EstimationPlant Capacity 15 Tons/DayLand & Building (2 Acres) Rs. 2.10 Cr.Plant & Machinery Rs. 2.31 Cr.W.C. for 1 Months Rs. 19.53 Cr.Total Capital Investment Rs. 24.31 Cr.Rate of Return 57%Break Even Point 28%*********************************************************

SOY AND GLUTEN BASEDMOCK MEAT [EIRI-1547]

Golden palaces of mock meat. Most towns haveone; if you don’t know where it is, ask your localvegan or vegetarian. Staples in manyvegetarian and vegan diets, meat analogs arefood products that look, feel and taste like meatfrom an animal. Analogs blend plant-basedproteins with flavoring, fat and coloring toreplicate beef, poultry or seafood, and in somecases are used as filler in meat. These meatlessmorsels are often made of wheat gluten (alsocalled seitan). Gluten is the protein producedwhen combining wheat’s two major proteins,gliadin and gluten in, with water or milk throughthe process of kneading.

Cost EstimationPlant Capacity 5 Tons/DayLand & Building (Area 1.5 Acre) Rs. 3.90 Cr.Plant & Machinery Rs. 7.80 Cr.W.C. for 1 Months Rs. 2.36 Cr.Total Capital Investment Rs. 14.53 Cr.Rate of Return 57%Break Even Point 37%********************************************************

Hi-Tech Projects,Oct’16, www.eiriindia.org # 08

Best Industries to Start and Grow

Patrons, deposit amount in EIRI Account

STATE BANK OF INDIA

CA-30408535340(RTGS/NEFT/IFSC Code: SBIN0001273)

Hi-Tech Projects(Date of Posting 24th to 30th of Every Month,

Weight of Magazine- Upto 48 Gram)

An Industrial Monthly Magazine onHi-Tech Projects & developed

and underdevelopingTechnologies with lucrative

Project opportunitiesEditor

Sudhir GuptaAsst. EditorAnkur Gupta

SUBSCRIPTION RATESFOR INDIA

Single Copy Rs. 20/-One Year Rs. 225/-

Three Years Rs. 650/-(Add Rs. 100/- for outstation cheques.

Please make the Draft/Cheque infavour of “Engineers India Research

Institute, Delhi”

FOR OVERSEASSingle Copy US$ 10/-One Year US$ 120/-

CAUTIONProject Reports/Profiles provided in

this issue had been prepared ondatas available at the time of

preparing these reports.Entrepreneurs/Industrialists are

requested to please update the databefore venturing into any project

mentioned herein.

PUBLISHERS

4449 Nai Sarak, Main Road, Delhi - 110006(INDIA) Ph : 9111- 23916431, 23918117,

45120361, 9811437895, 9811151047E-Mail : eiritechnology@gmail.com,

eiriprojects@gmail.comWebsite: www.eiriindia.org

www.eiribooksandprojectreports.com

Patrons may also directly transfer thefund for Project Reports & Books in

following EIRI current accounts:HDFC BANK - 05532020001279(RTGS/NEFT/IFSC CODE: HDFC0001981)

ICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE: ICIC0000387)

AXIS Bank Ltd. - 054010200006248(RTGS/NEFT/IFSC CODE:UTIB0000054)

UNION BAK OF INDIA -307201010015149(RTGS/NEFT/IFSC CODE: UBIN0530727)

STATE BANK OF INDIA -30408535340(RTGS/NEFT/IFSC CODE: SBIN0001273)

AND SMS US ON PH. +91 9811437895

STAINLESS STEEL SINKS[EIRI-1546]

Stainless Steel Kitchen Sinks as the namesuggests are made of stainless steel. Sinksare the vessels used in houses and hotels,restaurants for cleaning dirty utensils, usedfor cooking, serving tea and coffee etc. andeating meals, break fasts, refreshments needto be anti-rust and strong, and hence and madeof stainless steel. The sinks are used wherethe utensils carry lot of fat and other sticksubstances on the surfaces and require fulldealing with detergents.

Cost EstimationPlant Capacity 200 Nos/DayLand & Building (450 sq.mt.) Rs. 74 LacsPlant & Machinery Rs. 52 LacsW.C. for 2 Months Rs. 2.09 Cr.Total Capital Investment Rs. 3.54 Cr.Rate of Return 38%Break Even Point 51%*******************************************************

FASTENERS (NUTS & BOLTS)USED IN OIL AND GAS

[EIRI-1545]Nuts and Bolts are most commonly used itemsin the family of industrial fasteners and theirdemand is fast increasing due to expansion ofindustries in the country. Bolt is a piece of metalrod whose one end is upset and at the otherend threading is done. Nut is a device whichrolls on bolt threads. In nuts, internal threadingis done while bolts bear external thread. Screw,demonstrate their true merit in the movements,assembly etc, of wooden components. Screwsare most popular as fasteners which assemble,or join parts together to be made into acomplete unit. Nuts and Bolts are available invarious sizes and shapes.

Cost EstimationPlant Capacity 13.33 MT./DayLand & Building (4000 sq.mt.) US$ 2.18 LacsPlant & Machinery US$ 3.45 LacsW.C. for 2 Months US$ 6.84 LacsTotal Capital Investment Rs. 13.10 LacsRate of Return 76%Break Even Point 43%*******************************************************

CURCUMIN & TURMERIC OILFROM TURMERIC [EIRI-1049]

Turmeric (Curcuma longa) is a native of Asia& India. The tuberous rhizone or undergroundsteam of turmeric are used from antiquity ascondiments. A dye and as an aromaticstimulants in several medicines.

Cost EstimationPlant Capacity 500 KGS/DayLand & Building (4000 sq.mt.) Rs. 3.13 Cr.Plant & Machinery Rs. 3.13 Cr.W.C. for 3 Months Rs. 10.75 Cr.Total Capital Investment Rs. 17.42 Cr.Rate of Return 71%******************************************************

CASTOR OIL DERIVATIVEOLEO RESIN [EIRI-1068]

Castor oil obtained by a combination ofpressing and extraction from the seeds of thecastor oil plant (Ricinus communis) consistsof upto 90% of triglyceride of ricinoleic acid,12 hydroxy oleic acid. The hydroxyl number ofcastor oil is 161-169. The componentglycerides of castor oil (%mole) comprisesaturated-diricinoleins (7.3%) oleo-diricinoleins(2.5%) Linoleo diricinoleins (13.4%), DihydroxyStearo diricinoldins (2%) Triricinolein (74.8%).More important the non-drying ricinoleic acidin the castor oil can be dehydrated to give adrying oil i.e. dehydrated castor oil. This dryingoil is formed by heating castor oil underreduced pressure of 240-260oC in the pressureof 0.1-0.2 wt.% of an acid catalyst e.g. H2SO4,phophoric acid, or acidic salts with theelimination of water from ricinoleic acid. yieldinga mixture of 9,11 and 9,12 octadecadienoicacids, called dehydrated castor oil acid.

Cost EstimationPlant Capacity 20 MT./DayLand & Building (3000 sq.mt.) Rs. 1.96 Cr.Plant & Machinery Rs. 88 LacsW.C. for 2 Months Rs. 7.61 Cr.Total Capital Investment Rs. 10.66 Cr.Rate of Return 76%Break Even Point 25%*******************************************************

TURMERIC OIL EXTRACTIONFROM DRY TURMERIC

[EIRI-1153]The main products in a spice oleoresin plantare oleoresins of chilli, pepper, ginger andturmeric. The co-products are correspondingspice oils, which are widely used in food andpharmaceutical industries. Spent meals ofspice powders after oleoresin extraction are by-products and are devoid of essential oils,pungent principles, fixed oils and resinousmatter for which the spices are valued. Thismay be considered for incorporation in animalfeed formulations, as spent meal is rich incarbohydrate and cellulose.

Cost EstimationPlant Capacity 150 KGS/DayLand & Building (1000 sq.mt.) Rs. 1.10 Cr.Plant & Machinery Rs. 64 LacsW.C. for 2 Months Rs. 1.30 Cr.Total Capital Investment Rs. 3.19 Cr.Rate of Return 36%Break Even Point 47%*******************************************************

COLD STORAGE(CONTROLLED ATMOSPHERE

OR CA) FOR POTATO CAP:1,00,000 BAGS

(50 Kg/Bag) STORINGCAPACITY:5000 MT. [EIRI-1163]

Cost EstimationPlant Capacity 5000 MT./DayLand & Building (9000 sq.mt.) Rs. 2.53 Cr.Plant & Machinery Rs. 3.26 Cr.Total Capital Investment Rs. 6.02 Cr.Rate of Return 12%

Hi-Tech Projects,Oct’16, www.eiriindia.org #09

Start Your Own Industry

EIRI Account HDFC BANKCA-05532020001279

(RTGS/NEFT/IFSC Code: HDFC0001981)

UPVC DOORS & WINDOWSFABRICATING PLANT (FIXING

AND INSTALLATION OF DOORSAND WINDOWS OF UPVC

PROFILES) [EIRI-1245]PVC was produced for the first time in 1935and has been industrially manufactured in largequantities for over 50 years. It has beendeveloped into a material that can offer a widerrange of properties and therefore has manydifferent applications. The production processstarts with sodium chloride, (common salt) fromwhich chlorine gas is obtained by electrolysis.Petroleum or natural gas is used to produceethylene, one of many products of the processknown as cracking. Bringing together chlorineand ethylene, liquid vinyl chloride (VC) isproduced which is immediately changed in theprocess by polymerisation into polyvinylchloride.

Cost EstimationPlant Capacity 2000 sq.mt./DayLand & Building (4000 sq.mt.) Rs. 1.75 Cr.Plant & Machinery Rs. 89 LacsW.C. for 1 Months Rs. 2.07 Cr.Total Capital Investment Rs. 4.96 Cr.Rate of Return 79%Break Even Point 30%********************************************************

PLASTICIZERS [EIRI-1230]Plasticizers (UK = plasticisers) or dispersantsare additives that increase the plasticity orfluidity of a material. The dominant applicationsare for plastics, especially polyvinyl chloride(PVC). The properties of other materials arealso improved when blended with plasticizersincluding concrete, clays, and related products.The worldwide market for plasticizers in 2000was estimated to be several million tons peryear. Throughout the period from 1970 to 1995,the worldwide plasticizer markets grew at ratesabove the various GNPs; however this trendhas started to decrease in North America andin Europe. In recent years, the average growthrate in those regions has ranged between 2and 3%, with projected growth rate of 1-2%.

Cost EstimationPlant Capacity 20 Ton/DayLand & Building (10,000 sq.mt.) Rs. 11.28 Cr.Plant & Machinery Rs. 3.41 Cr.W.C. for 3 Months Rs. 27.26 Cr.Total Capital Investment Rs. 42.86 Cr.Rate of Return 21%

Break Even Point 61%

****************************************************

LIQUID GLUCOSE FROMPOTATOES [EIRI-1530]

Potato is widely consumed as food all over theworld. It contains the starch as a majorcarbohydrate. Surplus and cull potatoes areused as feed for live stock and also as rawmaterial for the manufacture of starch, ethylalcohal and a few other industrial products like,

dextrose, liquid Glucose etc. The potatocontains approximately 18-21% ofcarbohydrates. The major carbohydrate isstarch. This starch is comprising 65-80% of thedry weight of the tuber is calorifically the mostimportant nutritional component. In the rawtuber, it is present as microscopic granules inlevcoplasts lining the interior cell walls ofparenchyma tissue.

Cost EstimationPlant Capacity 25 MT./DayLand & Building (5 Acres) Rs. 3.39 Cr.Plant & Machinery Rs. 8.05 Cr.W.C. for 2 Months Rs. 2.12 Cr.Total Capital Investment Rs. 14.18 Cr.Rate of Return 18%Break Even Point 69%******************************************************

LIQUID GLUCOSE AND MALTODEXTRIN FROM BROKEN RICE

[EIRI-1516]Starch is a group of polysacchrides, composedof glucopyranose units joined together by-glucosidric linkages. It conforms to themolecular formula, (C6-H10O5)u, where nvaries from a few hundred to over one million.Starch is found as the reserve carbonhydratein various parts of plants and is enzymaticallybroken down to gluose to other erbohydratesaccording to the metabollic needs of the plants.Industrially, starch is broadly divided into twotypes viz, natural and modified. Naturalstarches, also designated as unmodifiedstarches or simply starches, are obtained fromgrains such as and sorghum. from roots likepotato, tapioca and arrow root, and from thepith of the stems of certain palms such a sago.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (16’000 sq.mt.) Rs. 13.47 Cr.Plant & Machinery Rs. 4.60 Cr.Total Capital Investment Rs. 24.43 Cr.Rate of Return 36%Break Even Point 47%********************************************************

MINI FLOUR MILL(ATTA, MAIDA, SUJI) [EIRI-1511]The plant will have facility to produce, Maida,Sooji, Atta and bran. These products will besold as per the guidance issued for Food andCivil Supplies Department of the concernedstate. The same plant can be used to processother cereals such as rice gram, dal etcHowever, attempt is made have to examinefeasibility and profitability of processing wheatto produce Maida, Sooji, Atta and bran. Flourmill serve the purpose of processing wheat toconvert it into flour. Wheat grains are the seedsof the wheat plant which is able to grow iskinds of soil and under widely differing climaticconditions.

Cost EstimationPlant Capacity 40 MT/DayLand & Building (2000 sq.mt.) Rs. 2.55 Cr.Plant & Machinery Rs. 57 Cr.Total Capital Investment Rs. 5.39 Cr.Rate of Return 41%Break Even Point 42%******************************************************

DRY WALL PUTTY (WHITECEMENT BASED) [EIRI-1475]

White cement based Wall Putty a plasteringmaterial to fill the holes and patches beforepaint primer or distemper. In general, fillers &stoppers are paste-like materials, highlypigmented, used to fill surface imperfections(fillers) and to make good gross surface defectsprior to painting operations (stoppers).Caulking compounds, putties and samecements have a boiled drying oil, usuallycombine with resins that act as the binderputty is the thick mixture of finally powderedcalcium carbonate (whiting) and acid refinedlinseed oil which imparts good wetting andgrinding characteristics.

Cost EstimationPlant Capacity 100 Ton./DayLand & Building (1200 sq.mt.) Rs. 1.20 Cr.Plant & Machinery Rs. 79 Cr.W.C. for 1 Months Rs. 4.25 Cr.Total Capital Investment Rs. 6.44 Cr.Rate of Return 29%Break Even Point 62%********************************************************

CATHETERS MANUFACTURING[EIRI-1490]

A catheter is a flexible tube made of latex,silicone, or Teflon that can be inserted into thebody creating a channel for the passage of fluidor the entry of a medical device. For manyyears the epidermal catheters used were plaintubes made of available industrial compounds,and design was largely based on current need.Catheters are designed to perform tissueablation (tissue removal) and even serve asconduits for thermal, optics, and variousmedical devices.

Cost EstimationPlant Capacity 2000 Tubes/DayLand & Building (Area 1 Acre) Rs. 2.03 Cr.Plant & Machinery Rs. 3.73 Cr.W.C. for 1 Months Rs. 1.13 Cr.Total Capital Investment Rs. 8.27 Cr.Rate of Return 18%Break Even Point 69%********************************************************

HDPE, PVC, LLDPE PIPES/TUBES & FITTING [EIRI-1497]

PVC is a thermosetting plastic. In other words,it can only be softened and molded into formonce. If it is softened and remolded a secondtime it will lose some of it’s favorablecharacteristics. PVC is very corrosion resistant.It is not a conductor and will not have anelectrochemical reaction with acids and basesthat it comes in contact with. For this reason,PVC is sometimes used to coat other materialsfor protection. PVC also has a high chemicalresistance.

Cost EstimationPlant Capacity 5 MT./DayLand & Building (75,000 sq.ft.) Rs. 6.17 Cr.Plant & Machinery Rs. 1.38 Cr.W.C. for 1 Months Rs. 95 LacsTotal Capital Investment Rs. 8.67 Cr.Rate of Return 25%Break Even Point 56%*******************************************************

Hi-Tech Projects,Oct’16, www.eiriindia.org # 10

Top Industries to StartBANANA CHIPS, BANANAPULP & BANANA POWDER

(BANANA PRODUCTS)[EIRI-1483]

The technology development in agricultureis very fast, it results in developing TissueCulture Technique. Banana is basically atropical crop, grows well in temperature rangeof 13:C - 38:C with RH regime of 75-85%. InIndia this crop is being cultivated in climateranging from humid tropical to dry mildsubtropics through selection of appropriatevarieties like Grandnaine. Chilling injuryoccurs at temperatures below 12:C. Thenormal growth of the banana begins at 18:C,reaches optimum at 27:C, then declines andcomes to a halt at 38:C. Higher temperaturecauses sun scorching.

Cost EstimationPlant Capacity 2.50 Ton./DayLand & Building (2000 sq.mt.) Rs. 88 LacsPlant & Machinery Rs. 63 LacsW.C. for 2 Months Rs. 1.02 Cr.Total Capital Investment Rs. 2.64 Cr.Rate of Return 31%Break Even Point 54%******************************************************

BOTTLING PLANT(COUNTRY LIQUOR)

[EIRI-1233]There are nevertheless several very earlyreferences which can be taken to indicate thata potable spirit (like country liquor) wasknown many thousands of years ago. Theearliest regarding excessive consumption ofpotable distilled spirit, i.e. country liquor andother products, appear to have come fromChina, some 1000 years B.C. Aristotle latermentions purifying sea water by evaporation,and also “wine which produces a spirit”. Forcenturies the art of distilling remained firmlyin the hands of alchemists. Herbs had longbeen thought to cure various maladies,agriurduly for Jaundice, fox glore, for blistersand it would seem that the alchemists arguedthat, if the juice of one of these herbs couldbe, say, quadrupled in strength, then theefficiency of cure would be multiplied four fold.The alchemists were responsible for manyimprovements in the art of distilling.

Cost EstimationPlant Capacity 10000 Ltrs./DayLand & Building (1.52 Acres) Rs. 2.11 Cr.Plant & Machinery Rs. 1.20 Cr.W.C. for 1 Months Rs. 1.31 Cr.Total Capital Investment Rs. 4.89 Cr.Rate of Return 52%Break Even Point 38%***************************************************

MAIZE & BY-PRODUCTSPROCESSING [EIRI-1421]

Starch is an abundant carbohydratedistributed worldwide in plants. Starch hasbeen a major ingredient in man’s diet overthe centuries. In addition it has become amajor industrial raw material. Plant seeds,roots and tubers are all sources of industrial

starch production. The commercial realitiesof the starch recovery process limit theindustrial sources mainly to wheat, maize andtapioca. Indian starch industry mainlyconsumes maize as input raw material. Maizeis doing wonderful things in our everyday life.Maize (Corn) contains about 70% starch,other components being protein, fibers andfat. The basis of the maize milling process isthe separation of the maize kernel into itsdifferent parts.

Cost EstimationPlant Capacity 50 TPD/DayLand & Building (10 Acres) Rs. 1.03 Cr.Plant & Machinery Rs. 8.50 Cr.W.C. for 1 Months Rs. 2.16 Cr.Total Capital Investment Rs. 12.41 Cr.Rate of Return 40%Break Even Point 49%********************************************************

DETERGENT CAKE ANDPOWDER [EIRI-1485]

Synthetic detergents have developed in thebeginning of 20th Century and started makingin-roads into the area earlier served by washingcompounds i.e. soaps made traditionally fromoils/fats and caustic soda. Since soaps havecomparatively lesser washing characteristicsin hard water than synthetic detergents,synthetic washing compounds have been ableto occupy a significant market which wasenjoyed by washing soaps earlier. The termdetergent originated from the latin worddetergine (i.e. wipe off), is now-a-days appliedto all synthetic washing compounds. Syntheticdetergent is not only used as householdcleaning material but also have industrialapplications in textiles, pesticide industry ascarriers, etc.

Cost EstimationPlant Capacity 40 MT./DayLand & Building (6000 sq.mt.) Rs. 4.32 Cr.Plant & Machinery Rs. 43 Cr.Total Capital Investment Rs. 7.06 Cr.Rate of Return 74%Break Even Point 30%

COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) AND

MILK PROCESSING[EIRI-1486]

Dairy industry is of crucial importance to India.The country is the world’s largest milk producer,accounting for more than 13% of world totalmilk production. It is the world largest consumerof dairy products, consuming almost 100% ofits own milk production. Dairy products are amajor source of cheap and nutritious food tomillions of people in India and the onlyacceptable source of animal protein for largevegetarian segment of Indian population,particularly among the landless, small andmarginal farmers and women. India’s high-value, high-volume market for traditional dairyproducts and delicacies is all set to boomfur ther under the technology of massproduction. This market is the largest in valueafter liquid milk and is estimated at US$3 billionin India and US$1 billion overseas. More and

more dairy plants in the public, cooperative andprivate sectors in India are going in for themanufacture of traditional milk products.

Cost EstimationPlant Capacity 50000 LTR./DayLand & Building (Area 30 Acre) Rs. 13.98 Cr.Plant & Machinery Rs. 15.40 Cr.W.C. for 1 Months Rs. 2.71 Cr.Total Capital Investment Rs. 47.87 Cr.Rate of Return 21%Break Even Point 56%*********************************************************

SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE &PLASTER CAST (READYMADE)

E.G. GYPSONA, 3M CAST[EIRI-1494]

Absorbent Cotton also known as SurgicalCotton or Cotton Wool is mainly used formedical purposes in hospitals, nursing homes,dispensaries etc., Because of high fluidabsorbency power, it is better known asabsorbent cotton. The absorbent cotton shouldbe chemically inert and soft to give maximumprotection and should not cause irritation.These proper ties can be achieved bymanufacturing the product as per standardmethod of manufacture. The raw cotton isprocessed by series of steps which render thecotton hydro-phallic in character and free fromexternal impurities needed to be fit for use insurgical dressings and personal hygiene.

Cost EstimationPlant Capacity 250 Kg./Day Surgical Cotton 1500 Kg./Day Roller Bandage 1000 Nos./Day Crep Bandage 1000 Nos./Day Plaster Cast (Readymade)Land & Building (1000 sq.mt.) Rs. 1.04 Cr.Plant & Machinery Rs. 53 LacsW.C. for 2 Months Rs. 75 LacsTotal Capital Investment Rs. 2.37 Cr.Rate of Return 28%Break Even Point 63%*********************************************************

DICALCIUM PHOSPHATE FROMROCK PHOSPHATE

[EIRI-0745]Dicalcium phosphate exists in anhydrous aswell as dehydrate form, the latter being the formmarketed as a fertilizer. When pure, dehydrateform contains 41.26% P2O5(18.33%P) and islargely citrate-soluble. Dehydrate was moresoluble than anhydrous. It was more soluble inammonium sulphate solution than in others.The Naubauer test with barely using 32Pshowed that the uptake of fer til izerphosphorous was more from the dehydrateform. The basic raw material for this productbeing rock phosphate.

Cost EstimationPlant Capacity 10 Ton/DayLand & Building (2 Acres) Rs. 2.35 Cr.Plant & Machinery Rs. 1.74 Cr.W.C. for 1 Months Rs. 52 LacsTotal Capital Investment Rs. 4.90 Cr.Rate of Return 23%Break Even Point 67%*******************************************************

To get Loan/Finance from Banks/Finacial Institutes.

To set up your own Industry/Unit

To have Detailed & Exhaustive Data on any Project.

A complete List of Industrial Project Reports are given on www.eiribooksandprojectreports.com

EACH DETAILED PROJECT REPORT CONTAINS:INTRODUCTION : Project Mix, Uses & Applications, Quality Control Measure & Their Introduction for Attaining RequiredProperties Economy & Productivity Competence.

MARKET SURVEY : Market Position, Installed Capacity Production, Anticipated Demand, Present Manufacturers,Statistics of Imports & Exports, Estimated Demand, Demand & Supply Gap (If available), LI/IL Issued Recently

PROCESS OF MANUFACTURE : Inventory Controls & Tests, Comparative Study of Process for Manufacturing theProduct, Formulations, Process Flow Sheet Diagram, Process Detail in Stages from Raw Materials to Finished Products

RAW MATERIALS : Raw Material Specifications, Market Codes & Raw Material Prices, Sources of Procurement ofRaw Materials [Imported/Indigenous]

PLANT & MACHINERY : Range of Machineries Required, Detailed Specifications of Machines & Equipmants, Pricesod Machineries, Suppliers of Plant and Machineries.

LAND & BUILDING : Total Land Area Requirement with Rates, Covered Area Break-up with Estimated Costs ofConstruction

PROJECT ECONOMICS : Land & buildings, Plant, Machinery & Other Fixed Assets, Total Capital Investment, WorkingCapital Assessment, Raw Material & Consumable Stores, Staff Salaries & Wages, Utilities & Overheads, Total Cost ofProject, Sources of Finance/Refinance, Break Even Point Determination.

* EIRI Project Reports are prepared by highly qualified & experienced consultants &Market Research and Analysis supported by a panel of Experts and Computerised.

* Data provided are reliable and uptodate collected from manufacturers/suppliers, plantalready commissioned in India.

EIRI Technocrats and Engineers have just prepared“MARKET SURVEY CUM DETAILED TECHNO ECONOMIC FEASIBILITY REPORTS”

on following lucrative products which are most viable and profitable and having bright future scope

For assessing Market Potential, Corporate Diversifications,Planning, Investment Decision Making and to start your own setup,Entrepreneurs and Industrialists are most welcome to contact EIRI.

* COPPER SULPHATE FROMCOPPER ASH/SCRAPCHELATED ZINC (ZN-EDTA)12%

* ORTHOPAEDIC IMPLANTSAND INSTRUMENTSBARLEY MALT

* MINERAL TURPENTINE OIL(M.T.O.) FROM PETROLEM(SUPERIOR KEROSENE OILOR OTHER MATERIAL)

* M.S.FASTENERS AND S.S.FASTENERS

* P.V.C. COMPOUNDING(FRESH) FOR CABLES ANDPVC PIPES

* BANANA FIBRE EXTRACTIONAND HAND MADE PAPERBANANA & ITS BYPRODUCTS

* COLOUR AND ADDITIVESMASTERBATCHES

* METALLIC STEARATE* SURGICAL METHYLATED

SPIRIT* KHADSARI SUGAR (500 TCD)* COTTON (RUI) FROM WASTE

COTTON CLOTH* LAUNDRY & DRY CLEANERS* COATED YARN* TOUGHENED GLASS* CAUSTIC SODA (SODIUM

HYDROXIDE) (NaoH)ELECTROLYTIC PROCESS

* PLASTIC WASTE RECYCLINGUNIT & PYROLYSIS PLANTFROM PLASTIC AND RUBBERWASTE (INTEGRATED UNIT)

* CHITIN & CHITOSAN FROMPRAWN SHELL WASTE

* PASTA PRODUCTION PLANT(SHORT PASTA)

* SODIUM HYDRO SULFITETHROUGH FORMALDEHYDEROUTE CAP-20 TPD

* SODA ASH PLANT FROMSOLVAY PROCESS

* ONION, AND GARLICPOWDER WITH GRAPEDEHYDRATION (RAISINS)

* FLUSH DOORS* DI-METHYL PHTHALATES

(DMP)* GLUTEN FREE BEER

* PVC AND PP FILES ANDFOLDERS

* SULFAMIC ACID PURECRYSTAL AND OTHER GRADE(GP,SR & TM GRADE)

* DECORATIVE LAMINATEDSHEET (SUNMICA)

* ALPHA CELLULOSE POWDERFROM COTTON WASTE

* CAST POLY PROPYLENEFILMS ( CPP FILM)

* CASHEW NUT PROCESSING* BIOGAS PRODUCTION (1500

CUBIC METER PER DAY)* SOYA MILK AND PANEER* MINERAL TURPENTINE OIL

(MTO)

EIRI is an expertIndustrial Consultantworking over 35 years

and specialized toprepare all types ofDetailed Project

Reports based onclients requirements.Do Contact Today at:

eiritechnology@gmail.com

Hi-Tech Projects,Oct’16, www.eiriindia.org # 11

Hi-Tech Projects,Oct’16, www.eiriindia.org # 12

* STEEL FABRICATION* STEEL ROLLING MILL

(REINFORCEMENT BAR)* ACRYLIC BATH TUB BY

ACRYLIC SHEET* FABRICATION OF HEAT

EXCHANGER* KITCHEN PRODUCTS

MADE OF STAINLESS STEEL* ALUMINIUM BEVERAGE CAN* STEEL ROLLING MILL (BY

INDUCTION FURNACE FROMSTEEL SCRAP & SPONGIRON

* M.S. BILLET CASTING WITHINDUCTION FURNACEFROM STEEL SCRAP &SPONGE IRON

* PROCESSING OF LOWGRADE TUNGESTEN OREFULL BODY & CHASSISSBUS PLANT

* ASSEMBLY OF AIR –CONDITIONER/CHESTFREEZER/REFRIGERATOR

* G.I.LADDER & PERFORATEDTRAYS

* ALUMINIUM DOORS &WINDOWS (ALUMINIUMFABRICATION)

* LEAF SPRINGS FORTRACTOR DRAWNTROLLEYS & FOURWHEELER TEMPOS

* STEEL BRIGHT BARS* AUTOMOTIVE ENGINE VALVE* AUTOMOTIVE BRAKING

SYSTEM* DISPLAY COOLER* ERW STEEL PIPES & TUBES* STEEL INGOTS* TMT STEEL BARS (SARIYA)* AUTOMOBILE TRACTORS* ACTIVATED ALUMINA BALLS* ALUMINIUM FOIL* STONEWARE PIPE

(S.W.PIPE)/ CLAY PIPE* IRON ORE PELLETIZATION* ELECTRIC CONTROL PANEL* SOLAR PV POWER PLANT* MACHINE SHOP (FOR OIL

AND GAS ENGINEERINGINDUSTRY, AEROSCAPEENGINEERING INDUSTRY)

* STEEL BRIGHT BARS* CEILING FAN* COPPER STRIP COILS FROM

SCRAPS* PRODUCTION OF PV

PANELS (SOLAR PV PANELS)* ROTARY AIR LOCKS, SCREW

CONVEYOR, MOTORIZED/PNEUMATIC DAMPER, FLAPVALVES, AIR SLIDESREQUIRED IN CEMENTPLANTS AND THERMALPOWER PLANT

* ALUMINIUM EXTRUSION

* ALUMINIUM COIL COATINGFOR ACP AND ROOFING IND.

* PAVING BLOCK* WIRE NAILS* TMT STEEL BARS* FASTENERS/NUT & BOLTS

(INDUSTRIAL &AUTOMOBILE)* HYDRAULIC CYLINDERS* DISPOSABLE SYRINGES

WITH NEEDLE PLANT* FABRICATION UNIT

(PRESSURE VESSEL,REACTOR VESSEL &AGITATORS, HEATEXCHANGERS) & SEAMLESSPIPES AND TUBES

* COPPER POWDER FROMCOPPER SCRAP

* STONE CRUSHER* PRODUCTION OF ALL

TYPES OF FANS SUCH ASAXIAL FANS,CENTRIFUGALFANS (SMOKE EXTRACTFANS & FRESH AIR SUPPLYFANS), BATHROOM FANSETC.

* STONE MINING* MAHINDRA CAR

DEALERSHIP WITHAUTOMOBILE SERVICESTATION/GARAGE

* AUTO FILTERS (AIR FILTERS,OIL FILTERS & FUEL FILTERS)

* AAC & ACSR ALUMINIUMCONDUCTORS

* MANGANESE ORE JIGGING* STEEL TRANSMISSION LINE

TOWERS AND ROLLING MILLTO PRODUCE STEELSECTIONS

* FERRO SILICON (FROMMINERAL INGREDIENTS)STAINLESS STEEL TUBES

* M.S.FASTENERS ANDS.S. FASTENERS

* PREFABRICATED STEELFRAMED BUILDINGMANUFACTURING PLANT

* LEAD ACID BATTERY* GALVANISED WIRE* POWER TRANSFORMER

(50 KVA TO 2000 KVA)* M.S. PIPE* GALVANISED IRON SHEETS* M.S.BILLETS* STEEL GRATING

(GALVANISING ELECTROFORGED STEEL GRATING)

* ALLOY WHEELS PLANT* ESTABLISHMENT OF

MANUFACTURING OFREFRIGERATING APPLIANCE

* WELDED WIRE MESH* ALUMINIUM COLD

ROLLING MILL FORSHEETS & CIRCLES

* ALUMINIUM ROLLINGMILL FOR MANUFACTURINGALUMINIUM CIRCLES

REQUIRED FORPRESSURE COOKERS,NON STICK COOKWARES& CIRCLES

* LPG CYLINDER* ALUMINIUM COMPOSITE

PANNELS* DEEP FREEZER

ENVIRONMENTALCLEARANCE FOREXPANSION OF INGOTS/BILLETS PLANT

* FERRO SILICON BYSMELTING PROCESS

* ALUMINIUM CONDUCTOR* PRESTRESSED

CONCRETE POLES* FASTENERS (NUT & BOLT)

USED IN OIL AND GAS* ALUMINIUM ALLOY PLANT* STAINLESS STEEL SINKS* ALUMINIUM ALLOY PLANT* P.V.C BATTERYSEPARATOR* AUTOMOTIVE TYRE AND

TUBE VALVES (VALVESMANUFACTURING)

* PRESSURE COOKWAREALUMINIUM, STAINLESSSTEEL & HARD ANODIZED

* ELECTRIC WATER HEATER* SOLAR WATER HEATER

DOMESTIC & INDUSTRIAL* CORRUGATED

COLOURED ROOFINGGALVANISED IRON SHEET

* PRESSURE DIE CASTING* G.I.WIRE AND BARBED

WIRE* G.I.WIRE & M.S. BINDING

WIRE* HOT DIP GALVANIZING

PLANT FOR STRUCTURALSTEEL AND PIPES

* COLD ROLLING MILL* DOOR HINGES (MILD

STEEL AND STAINLESSSTEEL)

* PRESSURIZED AEROSOLS(LIKE BODY SPRAYS,PERFUMES, SHAVINGFOAM AND SHAVING

LOTIONS ETC.)* ANHYDROUS SODIUM

DITHIONITE PRODUCTION(SODIUM FORMATEPROCESS)

* SODA ASH PLANT (FROMSOLUTION BRINE)

* SISAL FIBREREINFORCED

* CEMENT ROOFING SHEET* HIGH ALUMINA

REFRACTORY BRICKPLANT

* CATHETERSMANUFACTURING

* SURGICAL RUBBERDISPOSABLE GOODS

* POULTRY AND HATHERYFARMING

* MILK PROCESSING PLANT* ROASTED, SALTED ALMONDS,

PEANUTS FOR PACKING IN25g, 50g,250g & 500g SACHET-S

* BEER FROM POTATOES* GUAR GUM POWDER* AUTOMATIC WHITE BREAD

MAKING PLANT* AUTOMATIC BISCUIT MAKING

PLANT* FROZEN FOOD BY IOF

TECHNOLOGY* WALNUT PROCESSING PLANT* WHIPPING CREAM FRUITS &

VEGETABLES POWDER UNIT(EXPORTS ORIENTED UNIT)

* NATURAL MEDICINE &RESEARCH INSTITUTEWITH 150 BEDS HOSPITAL

* PACKAGED DRINKING WATER(PACKED IN 330 ml CUP, 500MLBOTTLE, 1500 ML BOTTLE AND20 LTR. JAR)

* COLD STORAGE(CONTROLLED ATMOSPHEREOR CA) FOR POTATO CAP:1,00,000 BAGS (50 Kg/Bag),STORING CAP: 5000 Mt,SOLVENT EXTRACTION& REFINING (SOYABEAN)(Cap: 250mt/day & 50mt/Day OilRefining)

* BOTTLING PLANT (WHISKY,BRANDY, RUM, VODKS, GIN)FROM RECTIFIED SPIRIT/ENALUBE OIL BLENDING ANDGREASES PLANT

* COLD STORAGE FOR POTATO1,00,000 BAGS (50 KG/BAG)

* MAIZE FLOUR & BY PRODUCTMANUFACTURING PLANT

* CUT FLOWER (GLADIOLI,MARIGOLD, STATICE,CHRYSANTHEMUM ROSEWITH GREEN HOUSE)

* CATTLE FARMING ANDDAIRY PRODUCTS

* COLD STORAGE FORPOTATOAND OTHER HORTICULTUREPRODUCTS Cap:- 5000 Mtor 100000 Bags (50 Kg/Bag)

* DEXTROSE PLANT* SBR RUBBER SHEETS AND

SHOE MANUFACTURING* CASHEW NUT PROCESSING* PLYWOOD AND PLYBOARD

PARTICLE BOARD ANDLAMINATED PARTICLE BOARD

* VENEER MAKING, PLYWOOD& PLYBOARD MAKING

* WALNUT & PINUS(CHILGOZA)OIL, SHELL POWDERPROCESSING PLANT

* COUNTRY LIQUOR BOTTLINGPLANT (1,00,000 BOTTLES/DAY)

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

Hi-Tech Projects,Oct’16, www.eiriindia.org # 13

* PLASTIC GRANULES FROMPLASTIC WASTE

* ROPE AND SUTLI MAKINGPLANT

* BOTTLING PLANT (COUNTRYLIQUOR) 10,000 LTRS./DAY)

* I.V. FLUID (FFS OR BFSTECHNOLOGY)

* TOXIN PAN MASALA,TOBACCO LESS GUTKHAAND ZARDA

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* UPVC DOORS & WINDOWSFABRICATING PLANT (Fixingand Installation of Door andWindows of uPVC profiles)

* RUBBER & FLATTRANSMISSION BELTCONVEYOR BELT

* MUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)

* MEDICAL COLLEGE WITH750 BEDS HOSPITAL FACILITY

* MICRO IRRIGATIONPRODUCT MANUFACTURINGPLANT

* HOT DIP GALVANIZINGMUSTARD OIL PROCESSINGPLANT (EXPELLER PROCESS)CEMENT TILES, CANAL LINESLAB, KERV STONE, PAYERRCC PIPE, MANOHOLECOVER,ENTERLOCKING ETC.MANUFACTURING PLANT

* MEDICAL COLLEGE (100STUDENT INTAKECAP. MEDICAL COLLEGEWITH 500 BED HOSPITAL)

* ESTABLISHMENT OF APRIVATE UNIVERSITY

* DIGITAL INKS* GALVANIZING PROCESS

PLANT FOR ELECTRICALPOLES

* MAIZE PROCESSING PLANT* STARCHES / MODIFIED

STARCHES/ LIQUID GLUCOSE/ DEXTROSE MONOHYDRATE/GLUCOSE SYRUPS / CORNSYRUP SOLIDS / HIGHMALTOSE CORN SYRUPS /MALTO DEXTRINE POWDER /CORN GLUTEN MEAL (60%)MAIZE OIL / SORBITOL.

* BABY CARE PRODUCTS* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* BOTTLING OF WHISKY* UPVC DOORS & WINDOWS

PROFILES* EPDM RUBBER PROFILES* FAT LIQUOR (CHLORINATED

PARAFFIN WAX)* FAST FOOD RESTAURANT

WITH CENTRALLISEDKITCHEN

* READY MADE GARMENT(T-SHIRT/POLO GOLFER/WOVEN SHIRTING & SUITINGFOR UNIFORMS/SWEATERS)MANUFACTURING

* BIO-DIESEL EXTRACTIONFROM JATROPHA,SOYABEAN, SUNFLOWER,RICE BRAN, ALGE &CULTIVATION OF JATROPHA

* FAST FOOD RESTAURANTCHAIN WITH CENTRALLISEDKITCHEN

* GUAR SPLIT POWDER ANDOTHER BY PRODUCTS

* SOLVENT EXTRACTIONPLANT (COTTON SEED)

* RASGULLA MANUFACTURINGAND CANNING

* CULTIVATION OF RICE &WHEAT COMMERCIAL &MECHANISED DEVELOPMNT

* MAIZE & BY PRODUCTSPROCESSING -STARCHMODIFIED STARCHES/LIQUIDGLUCOSE/DEXTROSEMONOHYDRATE/GLUCOSESYRUPS/CORN SYRUPSOLIDS/HIGH MALTOSECORN SYRPS/ MAITODEXTRINE POWDER/CORNGLUTEN MEAL (60%) MAIZEOIL/SORBITOL

* TEAK FARMING* ARTIFICIAL MARBLE

(SYNTHETIC)* POTATO STARCH CARDANOL

FROM C.N.S.L. (CASHEWNUTSHELL LIQVID

* INTEGRATED SCRAP YARD* POTATO STARCH* MANGO PULP (5 TON/HOUR

200 KG ASEPTIC PACKAGING)* BOTTLING PLANT (WHISKY,

BRANDY, RUM, VODKA, GIN)FROM RECTIFIED SPIRIT/ENA

* COW DAIRY FARMING(AYRSHIRE/HOLSTEIN) ANDMILK PROCESSING MILK/DAYCAP-50,000 LTR/DAY

* WHEAT FLOUR MILL* CHAKKI FLOUR MILL* I.V. FLUID (FFSTECHNOLOGY)* LIQUID GLUCOSE FROM

POTATOES* SORBITOL FROM MAIZE

STARCH* WALNUT PROCESSINGPLANT* SOLVENT EXTRACTION AND

OIL REFINERY CUM PACKINGOF RICE BRAN OIL

* COTTON SEED OIL SOLVENTEXTRACTION PLANT

* MARINE TRAINING INSTITUTE& PLACEMENT SERVICEPROVIDING AGENCY

* I.V.FLUID (FFS TECHNOLOGY)* CERAMIC FIBERS, CERAMIC

FIBRE BLANKET, CERAMICFIBRE BOARD AND CERAMICFIBRE ROPE

* COLD SUPPLY CHAIN* LAMI TUBE MANUFACTURING* EYE DROP 3 PIECES

(PLASTIC VIALS)* PET BOTTLES (CAMBER/

CLEAR IN COLOUR) CAP:15ML,60ML 100ML,135ML,200ML & 500ML

* BENZYL ALKONIUMCHLORIDE (BKC)

* NATURAL SUGAR WAX* MARGARINE BUTTERFROM

VEGETABLE OIL* GREEN HOUSE FOR CROP

PRODUCTION* ORGANIC DAIRY FARMING* E-WASTE* BIO-DIESEL FROM ALGAE* VANADIUM PENT OXIDE

GRAPHITE MINING ANDBENEFICIATION PLANT

* VITAMIN WATER* PET PREFORM CUM PET

BOTTLES* ORGANIC DAIRY FARMING

AND PRODUCING WHOLEMILK POWDER (WMP)

* HDPE BOTTLES* CAUSTIC SODA FROM

SODIUM CHLORIDE* COAL TAR PITCH* MOSQUITO REPELLANT* WRIST BAND* CASTOR OIL AND ITS

DERIVATIVES OLEO RESIN,TURKEY RED OIL, DCO, HCO,SEBACIC ACID, 12-HYDROXYSTEARIC ACID

* PAPAIN FROM PAPAYA* PROCESSED CHEESE* MONOCHLOROBENZENE* EUGENOL FROM CINNAMON

OIL* SULPHUR 80% WDG* CERAMIC FIBERS,

CERAMIC FIBRE BLANKET,CERAMIC FIBRE BOARDAND CERAMIC FIBRE ROPE

* SCREEN PRINTING* DI CALCIUM PHOSPHATE

FROM ROCK PHOSPHATE& HAIFA PROCESS

* PVC FLEXIBLE PIPE* FLEX BANNER USED IN

DIGITAL PRINTING* PIGMENTS BINDERS FOR

TEXTILE PRINTING* POULTRY & HATCHERY FARM* ALOEVERA JUICE AND GEL* LIME PUTTY* AUTOMOBILE WORKSHOP/

GARAGE* EGG TRAY FROM PULP* CARDANOL FROM C.N.S.L.* OXYGEN GAS

* POLYALUMINIUM CHLORIDE* NAMKEEN INDUSTRY

(BHUJIA, CHANACHUR ETC.)* POLYOL USED FOR

POLYURETHANES* POLYSTYRENE POLY

PROPYLENE OXIDE* DIETHYL PHTHALATE* UREA FORMALDEHYDE AND

MELAMINE* FORMALDEHYDE MOULDING

POWDER* INSTANT COFFEE* ANNATTO SEED COLOUR

EXTRACTION* FRUITS AND VEGETABLES

DRYING BY (FREEZE DRYINGMETHOD)

* BIO GAS PRODUCTION ANDBOTTLING PLANT

* JAM, JELLIES, FRUIT JUICEAND ALLIED PRODUCTSMATERNITY NURSING HOME

* CANNING & PRESERVATIONOF VEGETABLES

* CURCUMIN & TURMERIC OILFROM TURMERICDETERGENT WASHINGPOWDER (ARIEL TYPE)

* GRANITE SLAB AND TILES* TEA PACKAGING* PAN MASALA & GUTKHA* PRESTRESSED CONCRETE

ELECTRIC POLES* LEATHER SHOES* ROTOGRAVURE PRINTING

(FOR FLEXIBLE PACKAGING)* AUTOCLAVED AERATED

CONCRETE BLOCKS* OXYGEN AND NITROGEN

GAS PLANT* MANGANESE ORE

BENEFICATION* MINERAL WOOL* CALCIUM SILICATE* TOUGHENED GLASS* HUMIC ACID* OFFSET PRINTING UNIT

(5 COLOUR)* CASTOR OIL AND ITS

DERIVATIVES OLEORESIN* TISSUE PAPER PULPING

FROM SAW DUST* KNITTED GLOVES* RADIATOR COOLANT* LATEX FOAM RUBBER

(SPONG RUBBER)* GARLIC OIL AND POWDER* ACTIVATED CARBON &

SODIUM SILICATE FROMPADDY/ RICE HUSK

* TRIETHYLENE GLYCOL* RAMMING MASS* WOOD PEELING &

VENEER MAKING* PETROLEUM JELLY* DAIRY FARM (COW &

BUFFALO) TO PRODUCE

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Hi-Tech Projects,Oct’16, www.eiriindia.org # 14

MILK & PACKAGING INPOUCHES

* CUTTING OIL LIQUID GOLD(IN PASTE FORM)

* P.V.C. LEATHER CLOTH(REXINE)

* COAL TAR DISTILLATION* ALUMINIUM LABEL PRINTING* FOLDING CARTNS/MONO

CARTONS* SURGICAL DISPOSABLE

GLOVES (DIPPED RUBBERGOODS)

* AGRICULTURAL CHEMICAL(PLANT GROWTH PROMOTERAND PLANT GROWTHREGULATOR)

* MENTHOL BOLD CRYSTALSFROM MENTHOL FLAKES

* ORGANIC FARMING* CORRUGATED

POLYCARBONATE SHEET* COLD STORAGE* FLAT PVC LAMINATED* SAFTY GLASS/TOUGHENED

GLASS* PLASTIC GRANULES FROM

WASTE* DRY WALL PUTTY (WHITE

CEMENT BASED)* CHARCOAL BRIQUETTE* OXALIC ACID FROM

MOLASSES* POTATO GRANULES* SANITARY NAPKINS & BABY

DIAPERS* CORRUGATED BOXES* PLASTER OF PARIS* RUBBER ROLLER FOR

PRINTING MACHINE* LACTIC ACID* EMERY PAPER (SAND PAPER)* RUBBER RECLAIM SHEET

FROM USED BUTYL TYREAND TUBE

* MANGO PULP* PARTICLE BOARD FROM

BAGASSE AND RICE HUSK* TOILET PAPER & NAPKINS* TENDER COCONUT WATER* CALCIUM CARBONATE* LIME CALCINATION PLANT* INJECTION MOULDED

PLASTIC COMPONENTS* HYDRATED LIME* BLACK PEPPER* MULTIAXIAL GLASS FABRIC* LIQUID TOILET CLEANER

(HARPIC TYPE)* LIME & PRECIPITATED* CALCIUM CARBONATE* LIQUID GLUCOSE FROM

BROKEN RICE

* MEDICAL DISPOSABLEPLASTIC SYRINGES

* METAL POLISHING BAR* SANITARY NAPKINS & BABY

DIAPERS* PERFUMES/ATTAR* GEMS AND JEWELLERY* MULTIAXIAL GLASS FABRIC* ACTIVE ZINC OXIDE* COPPER PHTHALOCYANINE* TURMERIC OIL EXTRACTION

FROM DRY TURMERIC* CNSL BASED RESIN IN

LIQUID & POWDER FORMBOPP FILM

* BETA IONONE* BIO-FERTILIZER* ZINC & COPPER SULPHATE* PAPER BASED PHENOLIC

SHEET (FOR ELECTRICALAPPLIANCE)

* THINNERS (WHITE SPIRITBASED)

* SINGLE SUPER PHOSPHATE& SULPHURIC ACID

* MONO CALCIUM PHOSPHATE& DI-CALCIUM PHOSPHATE

* FLEXIBLE P.U. FOAM* ASPIRIN* SORBITOL FROM MAIZE

STARCH* SPICE OIL & OLEORESIN* ANTI-FOAMING AGENT

(SILICONE BASED) FORDISTILLERY, SUGAR, PAPERPLANT ETC.

* LAUNDRY & DRY CLEANER* BRICKS FROM STONE DUST* CARBOXY METHYL STARCH* TITANIUM DIOXIDE* UNDECYENIC ACID* PSA BASED NITROGEN

GENERATOR* SYNTHETIC IRON OXIDE* PVC INSULATION TAPE* TAMARIND KERNEL POWDER* ORGANIC CHEMICAL &

SOLVENTS* PLASTICIZERS* ICE PACK (SOLUTIONS

TYPE, VIOLET-SEMI SOLIDPOLYMER TYPE)

* GUM FROM TAMARIND* PEARL SUGAR CANDY

(MISHRI)* GOAT & SHEEP FARMING* GYPSUM PLASTIC BOARD

(AUTOMATIC PLANT)* NON-WOVEN INDUSTRY

(CARRY BAGS, SURGICALGOWN, FACE MASK, ROUNDCAPS, SHOE COVER, GLOVE)

* COTTON SPINNING, SIZING,

YARN, DYEING & WEAVING* CALCIUM CHLORIDE* AMINES & ALLIED PRODUCT* SPINNING COTTON* SILICONE FROM RICE HUSK* ADHESIVE (FEVICOL TYPE)* CAUSTIC SODA FROM

ELECTROLYSIS* CAMPHOR TABLETS* CERAMIC GLAZED WALL

AND FLOOR TILES* ZINC SULPHATE MONO* ETHANOL (BIO FUEL)

FROM RICE STRAW* GYPSUM MOULDING AND

GYPSUM BOARD* SMOKELESS COAL* ACID (SILICA) AND BASIC

RAMMING MASS* UNSATURATED

POLYESTER RESINS* DAIRY (BUFFALO) FARMING

SILICONE FROM RICE HUSK* N-ACETYL THIOZOLIDINE-

4-CARBOXYLIC ACID (NATCA)* PE BASED CARBON BLACK

COMPOUND* ONION DEHYDRATION* PVC PIPES & FITTING* GLASS REINFORCED* GYPSUM MOULDINGS

ABSORBENT COTTON &SURGICAL BANDAGES

* CALCIUM STEARATE BYFUSION PROCESS

* MANGO POWDER & OTHERFREEZE DRIED PRODUCTS

* MENTHOL OIL FROMLEAVES AND MENTHOL

* CRYSTALS (PEPPERMINT)MANUFACTURE OFCELLULOSE ACETATE

* ANTIFOAMING /DEFOAMING AGENT

* ALOEVERA CULTIVATION &PROCESSING

* SYNTHETIC MAGNESIUMSILICATES

* EPHEDRINEHYDROCHLORIDE

* ACTIVATED BLEACHNGEARTH

* TECHNICAL TEXTILES* FORMALIN FROM

METHANOL* CATIONIC SOFTNER

(STEARIC ACID BASED)* PRECIPITATED SILICA* PU BASED FOOT WEARS* FORMALDEHYDE RESIN

(UREA, PHENOL, MELAMINE)* HDPE MONO FILAMEN NET* POTATO & ONION FLAKES

* DUSTLESS CHALK(SCHOOL CHALK)

* TOMATO POWDER* BIODEGRADABLE /

COMPOSTABLE PLASTICS* ACRYLIC CO POLYMER

EMULSION* ESTER GUM (FOOD GRADE)* PROTEIN BASED FOAMING

AGENT* LECITHIN (SOYA BASED)* SOYA OIL AND CATTLE

FEED FROM SOYABEAN

* COMPARISON BETWEENFLY ASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* CELL CAST ACRYLICSHEET

* ACRYLIC BATH TUB ANDSHOWER TRAY

* THERMOCOLE BASEDDISPOSABLE PLATES

* SODIUM SILICATE FROMRICE HUSK

* ETHYL METHACRYLATE* SODIUM LAURYL ETHER

SULPHATE* LATEX GLOVES,

CONDOMS & CATHETER* CALCIUM NITRATE

GRAIN BASED ALCOHOLDISTILLERY

* BULK DRUGS* MARBLE QUARRYING* CULTIVATION OF

CAPSICUM IN GREENHOUSE

* SULPHUR 90% WDG* EGG POWDER* WOOD PLASTIC* COMPOSITE BOARD LINE* SODIUM LAURYL SULPHATE

AND SODIUM LAURYLETHER SULPHATE

* FISH PROCESSING* BABY CEREAL FOOD & MILK

POWDERS (BABY FOOD)* GUR (JAGGERY)* DAIRY PRODUCTS* CHLORINATED PARAFFIN

WAX (CPW)* HAND WASHING

DETERGENT POWDERUSING THE DRY MIXPROCESS INCLUDINGFORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* HANDWASHING DETERGENTPOWDER USING THE DRYMIX PROCESS INCLUDING

Market Survey Cum Detailed Techno Economic Faeasibility Report on all Projects are available contact:ENGINEERS INDIA RESEARCH INSTITUTE

4449, Nai Sarak, Main Road, Delhi - 110 006 (India) * Ph. : +91 9811437895, 9811151047, 91-11-23918117, 23916431, 23947058, 45120361Email: eiribooks@yahoo.com, eiriprojects@gmail.com Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Highly Profitable Projects for New Entrepreneurs “EIRI Market Survey Cum Detailed Techno

Economic Feasibility Reports”

TERMS AND CONDITIONS

Ask for the quotation for the required project report ateiritechnology@gmail.com or eiriprojects@gmail.com

Mob: +91 9811437895 or +91 9811151047

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)* Ph: +91 9811437895, 9811151047, 91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com, eiribooks@yahoo.com

* Website: www.eiriindia.org, www.eiribooksandprojectreports.com

Deposit the amount in “EIRI “Account with HDFC BANK CA-05532020001279 (RTGS/NEFT/IFSC CODE: HDFC00001981) OR ICICI

BANK CA - 038705000994 (RTGS/IFSC CODE: ICIC0000387) ORAXIS Bank Ltd. CA- 054010200006248 (RTGS/IFSCCODE:UTIB0000054) OR UNION BAK OF INDIA CA-

307201010015149 (RTGS/NEFT/IFSC CODE: UBIN0530727) ORSTATE BANK OF INDIA CA-30408535340 (RTGS/IFSC CODE:

SBIN0001273) & SMS ON PH. 09811437895

FORMULA OF DIFFERENTTYPES QUALITIES (LOW/MEDIUM/HIGH COST)

* DIGITAL PHOTOPAPER/INKJET PHOTOPAPER

* KAOLIN FOR ROAD MAKING* PEPPERMINT CULTIVATION &

PROCESSING* PEPPERMINT CULTIVATION &

PROCESSING* HDPE PIPE* ACTIVATED CARBON FROM

RICE HUSK* HT & LT INSULATOR, HT AIR

BRAKE SWITCH D.O. FUSE,LIGHTENING ARRESTOR

* PET BOTTLES IN CAP: 500ML,1 LTR, 2 LTRS, 5 LTRS, USEDFOR PACKAGED DRINKINGWATER, EDIBLE OILS

* ALCOHOLIC BEVERAGES(COUNTRY LIQUOR & IMFL)

* QUARTZ BASED INDUSTRIES(QUARTZ POWDER SILICASAND SILICA RAMMINGMASS FUSED SILICA)

* BEEDI (BIDI) BY MACHINE* RICE SHELLER* FRUIT RIPENING CHAMBER* MINERAL WATER AND PET

BOTTLING PLANT* DIAGNOSTIC LAB AND* ONLINE TRADING BUSINESS* CEREAL MILLING* MINI OIL PLANT SUITABLE

FOR GROUNDNUT OIL ANDCOTTON SEED OIL

* CHANACHUR, BHUJIA,GANTHIA (AUTOMATICPLANT)

* KHADYA SURAKSHA (FOODSECURITY)

* PLASTIC WATER STORAGETANKS

* ZINC SULPHATE,MONOHYDRATE & HEPTAHYDRATE

* CIGARETTEMANUFACTURING UNIT

* CATTLE FEED PELLETSPLANT FOR COW &BUFFALOE FOR BOOSTINGMILK AND GROWTHTYRE RECYCLING UNIT

* PAPAIN EXTRACTIONINDUSTRY

* CAKE SHOP* BUSINESS PROCESS

OUTSOURCE (B.P.O.)* EMPTY HARD GELATINE

CAPSULES* BIOFERTILIZER* PLASTIC MOULDING UNIT

(CHAIR, TABLES &VEGETABLE TRAYS)

* GOLD POTASSIUM CYANIDE(G.P.C.)

* HDPE, PVC & CPVC PIPESAND FITTINGS

* NO CARB PASTE(ANTICARBURIZING PASTE-WATER SOLUBLE) FOR HEATTREATMENT

* CONVERSION WASTEPLASTIC WITH TYRE INTOACTIVATED CARBON ANDINDUSTRIAL FUEL

* PYROLYSIS PLANT FROMPLASTIC & RUBBER

* COMPARISON BETWEEN FLYASH AND CELLULARLIGHTWEIGHT CONCRETE(CLC) BRICKS

* AGAR AGAR* NAIL POLISH* PLASTIC GRANULES FROM

WASTE* AGARBATTI SYNTHETIC

PERFUMERY COMPOUNDS &AGARBATTI COMPOUNDSLIKE (CHAMPA, MOGRA,SANDAL WOOD & LOBAN)

* PET PREFORM AND PETJARS (20 LTRS CAPACITY)

* KRAFT PAPER FROM 100%WASTE PAPER

* PRIVATE UNIVERSITY* LIQUID GLUCOSE AND

MALTODEXTRIN FROMBROKEN RICE

* DRY WALL PUTTY (WHITECEMENT BASED)

* CONSTRUCTION CHEMICALSOT PASTE

* FUSED SILICA FROM SILICASAND

* BANANA CHIPS, BANANAPULP & BANANA POWDER(BANANA PRODUCTS)

* CONFECTIONERY UNIT(TOFFEE, CANDY /LOLLIPOPCHEWING GUM, BUBBLEGUM CHOCOLATE)

* FORMALDEHYDE RESIN(UREA, PHENOL, MELAMINE& THEIR MODIFIED RESINS)

* EPDM RUBBER PROFILES(WEATHER STRIPS,INDUSTRIAL MONOSTRIPSETC)

* GRANITE CUTTING ANDPOLISHING UNIT (100% EOU)

* SURGICAL COTTON, ROLLERBANDAGE, CREPE BANDAGE& PLASTER CART (READYMADE) E.G. GYPSONA 3MCART

* ENTERTAINMENT CLUB,HOLIDAY RESORT, 4 STARHOTEL, AMUSEMENT PARKCUM WATER PARK,MUSHROOM & ITSPRODUCTS, FISH FARMING,LAKE FOR BOATING, DEERPARK ETC.

* HDPE, PVC, LLDPE PIPES/TUBES AND FITTING

* EPOXIDIZED SOYABEAN OIL(SECONDARY PLASTICIZER)USED IN PVC COMPOUND

* POULTRY PROCESSINGPLANT

* B.O.P.P. SELF ADHESIVETAPES

* I.V.SET* MANGANESE OXIDE AND

MANGANESE SULPHATE* ODOURLESS NYLON

GRANULES FROM FIBER OFWASTE TYRE WITHOUTCHANGING PROPERTIES OFNYLON

* PARTICLE BOARD FROM RICEHUSK OR WOOD WASTE ORSUGAR CANE BAGASSE ORMIXED OF ALL ABOVEPOULTRY LAYER ANDBROILER FARMING

* TOMATO, GUAVA AND MANGOPULP

* GREEN HOUSE* HYDROXY PROPYL GUAR

(HPG) AND CARBOXYMETHYL HYDROXY PROPYLGUAR

* BATHSOAP MANUFACTURE* PLASTIC MOULDED CHAIRS

FROZEN POTATO PATTY* CALCIUM ALUMINATE* ACTIVATED CARBON FROM

COCONUT SHELL* RIGID PVC FILM

MANUFACTURE FORPHARMACEUTICALS BLISTER

PACKAGING* NYLONE 66 CURING TAPE

USED IN RUBBER HOSE PIPEWRAPPING

* ANTIFOAMING/DEFOAMINGAGENT LIKE ANTAROL T-709

* SOY AND GLUTEN BASEDMOCK MEAT

* KRAFT PAPER USING WASTEPAPER AND OLDCORRUGATED CARTONS

* GLASS BOTTLE FOR BEERAND BEER MUG (TUMBLER)

* DISPOSABLE SYRINGES ANDNEEDLE PLANT (Single UseSyringes, Single Use Needles &As Syringes)

* DIRECT FILLED BALL PEN(USE AND THROW)

* BENZALKONIUM CHLORIDE* SPINNING COTTON (COTTON

SPINNING PLANT)* CALCIUM CHLORIDE USING

LIME STONE ANDHYDROCHLORIC ACID

* RUBBER POWDER FROMWASTE TYRES

* CALCINATION PLANT FORPYROPHYLLITE ANDDIASPORE MINERALS BYVERTICAL SHAFT KILNPROCESS

* ONION, GARLIC & GINGERDEHYDRATION PLANT

* POTASSIUM NITRATE* POTASSIUM SULPHATE* N.P.K. FERTILIZER* CHICORY EXTRACT

(ROASTED CHICORYGRANULES/CUBES, LIQUIDEXTRACT ETC.)

* SOLID WASTE SEGREGATION* LAMITUBE MANUFACTURE* BOARDING SCHOOL* CERAMIC FUSE TUBE/

BARRELS USED IN HRC FUSE* SODIUM POLYACRYLATE

DISPERSANT FOR USE INWATER BASED PAINT WITHDISPERSANT FOR PIGMENT

* NAIL POLISH, LIPSTICKS,NAIL POLISH REMOVER

* SOYA PRODUCTS (MILK,PANEER, TOFU, BUTTER,CHEESE CURD/YOGURT, ICECREAM) WITH PACKAGINGUNIT

* GREASE MANUFACTURING

Hi-Tech Projects,Oct’16, www.eiriindia.org # 15

Name of Books Rs. US$ Name of Books Rs. US$N Name of Books Rs. US$

CHEMICALS, DYES, LUBRICATINGOILS, PETRO CHEMICALS

ELECTROPLATING

AVAILABLE PROCESS TECHNOLOGY BOOKS AT www.eiriindia.org

* Small Medium & LargeChemical Industries

* Industrial ChemicalsTechnology Hand Book

* Modern Technology ofOrganic & InorganicChemicals

* Electroplating, Anodizing &Surface Finishing Technology

* Hand Book of Agro ChemicalIndust.(Insecticide & Pesticide)

* Technology of Synthetic Dyes,Pigments Intermediates

* Petrochemicals, Lubricants,Greases & Petroleum Refining

* H.B.of Lubricants, Greases &Petrochemicals Technology

* Technology of Gums, Adhesives& Sealants with Formulations

* Hand Book of Adhesiveswith their Formulae (2nd Edn.)

* Adhesives Technology &Formulations Hand Book

* Technology of Glue &Adhesives with AdhesivesBonding and Formulations

* Complete Hand Book onAdhesives and AdhesionTech. with Project Profiles

* Start Your Own ExportBusiness (How To Export)

* Start Your Own SmallBusiness and Industry

* Candle Making Processes &Formulations Hand-Book

* Stationery, Paper Converting& Packaging Industries

* Modern Inks Formulaes &Manufacturing Industries

* Profitable Businesses toStart for Entrepreneurs

* Modern Small & CottageScale Industries

* Profitable Small Cottage Tiny& Home Industries (2nd Edn.)

* Technology of Bio-Fuel(Ethanol & Biodiesel)

* Mod. Tech. of Bioprocessing* ModTech.of BioGas Production

GUMS, ADHESIVES & SEALANTS

BIO FUEL, BIO GAS &BIOPROCESSING

* Tech of Sweets (Mithai)withFormulae

* Technology of Sweets (Mithai),Namkeen and Snacks Foodwith Formulae

* Mfr. of Snacks Food, Namkeen,Pappad & Potato Products

* Technology of Water andPackaged Drinking Water

PACKAGED DRINKING WATER

PRINTING & PACKAGING* Complete Hand Book on Packaging

Technology & Industries* Printing Processes Tech. & Indt.* Hand Book of Printing Technology

(Offset, Screen, Flexo, Gravure,Inkjet & Digital)

* Hand Book of Offset PrintingTechnology

* Screen Printing withProcesses & Technology

* Hand Book of Prepress* Hand Book of Packaging Indus* Modern Packaging Technology

for Processing Food, Bakery,Snack Foods, Spices andAllied Food Products

* Hand Book of Food PackagingTechnology

* Modern Tech. of Printing Inks* Hand Book of Packaging

Technoloy

* Paint Pigment Varnish &Lacquer Manufacturing

* Paint Varnish Solvents& Coating Technology

* Paint, Pigment, Solvent,Coating, Emulsion, PaintAdditives & Formulations

* Technology of Coatings, Resins,Pigments & Inks Industries

* Mfg. Tech. & Formulations H.B.on Thinners, Putty, Wall & Indu.Finishes & Synthetic Resins

* Technology of SyntheticResins & Emulsion Polymers

* Technology of Paints andCoatings with Formulations

* Powder Coating Technology

* Moulds Design & ProcessingHand Book

* Hand Book of Plastic Materials& Processing Technology

* Injection Moulding of Plastics* Plastic Processing &

Packaging Industries* Plastic Waste Recycling Tech.* Technology of Plastic Films* Rotational Moulding Technology

HandBook* Plastic Compounding, Master

Batches, PET & Other Plastics* Synthetic Resins Technology

with Formulations

* Technology of PVC Compounding& Its Applications

* Polymer & Plastic Technology* H.B. of Fibre Glass Moulding* Techn. of Reinforced Plastics* Plastic Additives Technology* Technology of PET Bottles,

Preform and PET Recycling* Modern Technology of

Extrusion & Extruded Products* Technology of Synthetic

Resins & Emulsion Polymers* Technology of Plastic Additives

with Processes and Packaging* Complete Technology Book On

Identification Of Plastics AndPlastic Products Materials(Additives, Applications,Biodegradation, Biomedical,Bulk Moulding Compound,Chemical Analysis, Xlpe, DripIrrigation, Expanded Polyethylene,Polystyrene & Hdpe)

* Identification Of Plastics AndOther Plastic Process Industries(Polystyrene, Nylon, ThermoplasticElastomer, Alkyd Resin,Polypropylene Plastics, MelamineFormaldehyde Resins, Abs, PlasticBlends, Polyvinylidene ChloridePlastics, Polymer, Pipes)

* Complete Technology BookOf Plastic Processing AndRecycling Of Plastics WithProject Profiles

* Modern Technology OfInjection Moulding, BlowMoulding, Plastic Extrusion,Pet And Other Plastics

* Technology of Biscuits, Rusks,Crackers & Cookies withFormulations (Wafer Biscuits,Cream Sandwich Biscuits, OatCereal Biscuits, Low SugarBiscuits, High Fibre Biscuits,Herbal Biscuits, Dog Biscuitsand other Biscuits)

* Hand Book of Confectionerywith Formulations

* Breakfast, Dietary Food, Pasta& Cereal Products Technology

* Hand Book of Modern BakeryProducts (2nd Edn.)

* Modern Bakery Technology &Fermented Cereal Productswith Formulae

* Technology of Confectionery,Chocolates, Toffee, Candy,Chewing & Bubble Gums,Lollipop and Jelly Productswith Formulations

* Hand Book of Bakery Industries

* Start Your Own Wheat Flour Mill (Atta, Maida, Suji, Bran & Besan)

PAINT, VARNISH, SOLVENTS,POWDER COATING & LACQUERS

PLASTIC/POLYMER PROCESSING,COMPOUNDING, INJECTION

MOULDING, ROTATIONALMOULDING, PLASTIC FILM, FIBRE

GLASS, PLASTIC WASTERECYCLING, MOULDS, PET &

RESINS, ADDITIVES INDUSTRIES

BAKERY, CONFECTIONERY,BISCUITS, COOKIES,

BREAKFAST, PASTA & CEREALS

FLOUR MILL (ATTA MAIDA, SUJI)

SMALL SCALE INDUSTRIES,STATIONERY, PAPER, INKS,

CANDLES & EXPORT BUSINESS

SWEETS, NAMKEEN & SNACK FOOD

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ Name of Books Rs. US$

* Poultry Farm & Feed Formulae* Hand Book of Pig Farming* Agro Based H.B. of Plantation,

Cultivation & Farming* Agro-Based Plantation

Cultivation & Farming* Agro Chemical Industries

(Insecticide & Pesticides)* Modern Bee Keeping & Honey

Processing* Technology of Modern Rice

Milling and Basmati Rice* Hand Book of Goat Farming* Floriculture Hand Book

(Flowers Growing Technology)* Aloe Vera Cultivation,

Processings, Formulations andManufacturing Technology

* Dairy Formulations, Processes &Milk Processing Industries

* Milk Processing and DairyProducts Industries

* Dairy Farming to Produce Milkwith Packaging

* Hand Book of Ice CreamTechnology and Formulae

* Hand Book of Milk Processing,Dairy Products and PackagingTechnology

* Dairy Farming for MilkProduction Technology

* Commercial Dairy Farmingwith Project Profiles

* Herbs, Medicinal & AromaticPlants Cultivation

* Aushidhi and SungndhitPaudho Ka Vaysayik (Hindi)

* Aromatic & Medicinal Plantsand Biodiesel (Jatropha)

* Hand Book of Medicinal &Aromatic Plants

* Fruits & Vegetable ProcessingHand Book (2nd Edn.)

* Fruit Beverage & Processingwith Mango

* Food Processing & AgroBased Industries (2nd Edn.)

* Preservation & Canning ofFruits and Vegetables

* Hand Book of FoodDehydration & Drying

* Meat Processing & MeatProducts Hand Book

N Name of Books Rs. US$

AGRO CULTIVATION, ANIMALFARMING, AGRO PLANTATION &AGRO CHEMICAL/PESTICIDES/

FLORICULTURE & BEE KEEPING

HERBS CULTIVATION/MEDICINES

FOOD & AGRO PROCESS, TOMATOPROCESSING, PRESERVATION,

DEHYDRATION, FRUIT BEVERAGE,POTATO, MAIZE, MEAT, BANANA

* Technology of FoodPreservation & Processing

* Food Packaging Technology* Agro Based & Processed

Food Products* Potato & Potato Processing

Technology* Technology of Maize

& Allied Corn Products* Technology of Food

Processing Industries* Complete Book on Banana

Cultivation, DehydrationRipening, Processing,Products & Packaging Tech

* Agro Food Processingand Packaging Technology

* Modern Tech. of TomatoProcessing & Dehydration(Ketchup, Juice, Paste, Soup& Drying)

* Technology of FoodChemicals, Pigments& Food Aroma Compd.

* Modern Technology of AgroProcessing & Food PackagingProducts with ProjectProfiles

* Technology of Chicken Meatand Poultry Products

* Poultry Farming, Hatchery &Broiler Production

* Poultry Farm & Feed Formulae

* Modern Technology of Wood,Veneer, Plywood, ParticleBoard, Fibreboard, Bamboo& Forest Products

* Household Soap,ToiletSoap & Other Soap

* Profitable Small Scale Mfr.of Soaps & Detergents

* Synthetic Detergents withFormulations (2nd Edn.)

* Modern Technology of AcidSlurry, Surfactants, Soap andDetergents with Formulae

* Complete Technology Book onDetergents with Formulations(Detergent Cake, DishwashingDetergents, Liquid &PasteDetergents, Enzyme Detergents,Cleaning Powder & SprayDried Washing Powder)

* Manufacture of WashingSoap, Toilet Soap, DetergentPowders, Liquid Soap & HerbalDetergents and Perfumes withFormulations

POULTRY FARM, HATCHERY &CHICKEN MEAT TECHNOLOGY

WOOD, PLYWOOD, PARTICLE,BOARD, BAMBOO & FOREST

SOAP, DETERGENT & ACID SLURRY

COSMETICS TECHNOLOGY(SYNTHETIC & HERBAL)

* Cosmetics Processes &Formulations Hand Book

* Herbal Cosmetics & BeautyProducts with Formulations

* Profitable Small ScaleManufacture of Cosmetics(Synthetic & Herbal)

* Hand Book of Synthetic &Herbal Cosmetics

* Technology of HerbalCosmetics & ToiletriesProducts with Formulae

* Hand Book of Oils, Fats andDerivatives with Refining &Packaging Technology

* Technology of OilseedsProcessing, Oils & Fatsand Refining

* Essential Oils Manufacturing& Aromatic Plants

* Modern Technology ofEssential Oils

* Technology of Perfumes,Flavours & Essential Oils

* Essential Oils Processes& Formulations

* Hand Book of Flavours &Food Colourants Technology

* H. B. of Perfumes & Flavours* Hand Book of Perfumes

with Formulations (2nd Edn.)* Technology of Perfumes,

Flavours & Essential Oils* H.B. of Flavours Technology

* Technology Of Solar Pv Panels,Energy, Cells, Lantern, Cooler,Light System, Cfl Inverter,Photovoltaic System, PowerPlant, Water Heater, Collector,Solar Cooling, Refrigeration,Solar Drying, Tractor, HomeSystem, Dish Engine,Nanotechnology & Other SolarProducts Manufacturing

* Technology of Building Materials& Chemicals with Processes

* Mod. Tech. of Bleaching, Dyeing,Printing & Finishing of Textiles

* Technology of Textiles (Spinning& Weaving, Dyeing, Scouring,Drying, Printing and Bleaching)

* Garments Manufacturing Tech.

* H.B.of Pulp & Paper, PaperBoard & Paper Based Tech.

OILSEEDS AND FATS

ESSENTIAL OILS & AROMATIC

PERFUMES AND FLAVOURS

SOLAR PV PANELS, ENERGY

BUILDING MATERIAL & CHEMICALS

TEXTILE, GARMENTS, DYEING...

DAIRY FARM, MILK PROCESSINGAND ICE CREAM

PULP & PAPER TECHNOLOGY

LIST OF PUBLICATIONS/BOOKS PUBLISHED BY: ENGINEERS INDIARESEARCH INSTITUTE 4449, NAI SARAK, MAIN ROAD, DELHI - 6 (INDIA)

Name of Books Rs. US$ N Name of Books Rs. US$

* Technology of Spices andSeasoning of Spices withFormulae

* Spices &Packaging with Formula* Start Your Own Cold Storage Unit

* Complete Tech. of NonwovensFabrics, CarryBags, Composite,Geotextiles, Medical Textiles,Fibres, Felts, Apparels, Spunlaceand Absorbent Nonwoven

* Pharmaceuticals and DrugsTechnology withFormulations

* Hand Book of Leather &Leather Products Technology

* Hand Book of Biotechnology

* H.B.of Ceramics & CeramicsProcessing Technology

* Hand Book of Tree Farming

* Hand Book of MushroomCultivation, Processing& Packaging

* Biofertilizers & Vermiculture

* Modern Technology ofBiodegradable Plastics andPolymers With Processes(Bio-Plastic, Starch Plastics,Cellulose Polymers & others)

* Production of BiodegradablePlastics and BioplasticsTechnology

* Complete Hand Book onFrozen Food Processing& Freeze Drying Technology

* Modern Technology ofFrozen Food Products

* Hand Book of Minerals andMinerals Based Industries

* Hand Book of Organic Farmingand Organic Foods with Vermi-Composting & Neem Product

* Hand Book of Fish Farmingand Fishery Products

* Textile Auxiliaries andChemicals with Processes& Formulations

* Technology of TextileChemicals withFormulations

* Modern Technology of TextileAuxiliary and chemicalswith formulations

* Textile Processing Chemicals,Enzymes, Dye Fixing Agentsand Other Finishes withProject Profiles

* Manufacture of Disinfectants,Cleaners, Phenly, Repellents,Deodorants, DishwashingDetergents & Aerosols withFormulations

* Start Your Own Coffee &Coffee Processing

* Complete Book on OnionCultivation, Dehydration,Flakes, Powder, Processingand Packaging Technology

N Name of Books Rs. US$

Send Draft in favour of "Engineers India Research Institute" (Postage Rs. 100/- Extra)

NON WOVEN TECHNOLOGY

SPICES, SEASONING& COLD STORAGE

PHARMACEUTICALS & DRUGS

LEATHER &LEATHER PRODUCTS

BIOTECHNOLOGY

CERAMICS & CERAMIC PROCESS

TREE FARMING

MUSHROOM PROCESSING

BIOFERTILIZERS & VERMICULTURE

BIODEGRADABLE PLASTICSAND POLYMERS

FROZEN FOODAND FREEZE DRYING

RUBBER CHEMICALS, COMPOUNDS& RUBBER INDUSTRIES

AYURVEDIC MEDICINES

* Rubber Chemicals &Processing Industries

* Modern Rubber Chemicals,Compounds & RubberGoods Technology

* Technology of Rubber &Rubber Goods Industries

* Ayurvedic & HerbalMedicines with Formulaes

* Hand Book of AyurvedicMedicines with Formulations

* Modern Technology of NonFerrous Metals and MetalExtraction

* Processing Technology ofSteels and Stainless Steels

* Modern Technology ofRolling Mill, Billets, SteelWire, Galvanized Sheet,Forging & Castings

* Manufacturing Technology ofNon-Ferrous Metal Products

* Modern Technology of FoodAdditives, Sweeteners andFood Emulsifiers

* Technology of FoodChemicals, Pigments andFood Aroma Compounds

* Technology of DisposableMedical Products

* Technology of Soya Milk, Tofu,Hydrolyzate, Allied SoyabeanProducts with project Profiles

* Technology of SOYBEANProducts with Formulae

* Technology of Products fromWastes (Industrial, Agriculture,Medical, Municipality, Organic& Biological) By Panda

* Products from WasteTechnology Hand Book

* Technology of WineProduction and Packaging

* Casting Technology H.Book

STAINLESS STEEL, NON FERROUSMETALS, BILLETS & ROLLING MILL

FOOD ADDITIVES/CHEMICALS ANDSWEETENERS & FOOD EMULSIFIERS

DISPOSABLE MEDICAL PRODUCTS

SOYA MILK, TOFU & SOY PRODUCTS

PRODUCTS FROM WASTE

WINE PRODUCTION

ORGANIC FARMING & FOOD/NEEM

FISH FARMING & FISHERY PRODUCTS

TEXTILE AUXILIARY & CHEMICALS

DISINFECTANTS, CLEANERS,PHENYL, DEODORANTS,

DISHWASHING DETERGENTS ETC.

COFFEE & COFFEE PROCESSING

CASTING TECHNOLOGY

ONION CULTIVATION,DEHYDRATION, POWDER

PROCESSING & PACKAGING

MINERAL AND MINERALS

Regd. Off : 4449, Nai Sarak, Main Road, Delhi - 110 006 (India)

* Ph: +91 9811437895, 9811151047,91-11-23918117, 23916431,

45120361, 23947058, 64727385* E-Mail : eiriprojects@gmail.com,

eiritechnology@gmail.com* Website: www.eiriindia.org,

www.industrialprojects.inDeposit the amount in “EIRI

“Account with HDFC BANK -05532020001279 (RTGS/NEFT/

IFSC CODE: HDFC0001981) ORICICI BANK - 038705000994(RTGS/NEFT/IFSC CODE:

ICIC0000387)