Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
www.blum.com
SERVO-DRIVE flexFor electrical opening of handle-less, integrated refrigerators
2
www.blum.com/sdflex
Entirely handle-less kitchen designIn kitchens with minimalist, handle-less designs, integrated refrigerators, freezers and dishwashers can too now disappear stylishly behind furniture fronts. The SERVO-DRIVE flex electrical opening support system ensures easy opening.
33
Content
Flexible options for use
Versatile applications
Intelligent functions
Easy assembly and installation
SERVO-DRIVE single applications
Ordering and planning information
Blum
4
6
8
10
12
14
26
4
Left or right opening, sliding or fixed door – regardless of the installation situation, SERVO-DRIVE flex can be used with standard integrated refrigerators, combination fridge/freezers, freezers and dishwashers.
Flexible options for use
5
6
Various installation situations can be implemented with the SERVO-DRIVE flex electrical opening support system. The drive unit is suitable for various applications.
Versatile applications
7
For refrigerators, an optional wireless switch can be used to expand the trigger range on the front. Whichever part of the front is pressed, opening the door is always convenient.
Each door in the combination fridge/freezer is fitted with a separate SERVO-DRIVE flex unit and can therefore be opened individually.
Large and heavy doors, e.g. freezer doors, open with two synchronised drive units reliably and at the same time.
If SERVO-DRIVE flex is used with integrated dishwashers, the drive unit is mounted in the centre of the installation recess.
8
SERVO-DRIVE flex is a well-conceived system which is designed specifically to suit the demands of everyday kitchen use. Thanks to the intelligent functions, handle-less integrated devices can be operated easily and conveniently.
Intelligent functions
Lean protectionSERVO-DRIVE flex differenti-ates between short pressing actions and longer leaning actions. The lean protection prevents accidental triggering of the opening support system.
9
Trigger safetyAfter opening, the rod retracts into the drive unit. The user's working area remains free because the opening function is not triggered again until pressure is applied to the front.
Automatic self-closing systemIf the door is not fully opened after triggering the opening support system, the magnetic rod pulls the front shut again. This ensures that the door does not remain open accidentally.
Adaptive systemSERVO-DRIVE flex can be adapted to suit the door properties. This means the access gap is always the same size and the door can be opened reliably.
10
SERVO-DRIVE flex is mounted easily and conveniently in just a few steps. If the drive unit needs to be accessed subsequently, the front of the installation recess can simply be unclipped.
Easy assembly and installation
11
Attach mounting plateStart by screwing in a mounting plate to both the left-hand and right-hand sides in the installation recess.
Connect power supplyThe cabled SERVO-DRIVE flex unit is connected to the power supply.
Synchronise the drive unitDuring the reference run, the drive unit adjusts itself to the installation situation. SERVO-DRIVE flex is now ready for use.
Clip on drive unitThe drive unit can be clipped onto the left or right mounting plate, depending on the door opening.
Mount the frontThe front panel can be clipped directly onto the mounting plates over previously mounted attachments.
View assembly film www.blum.com/ sdflex_videos
12
www.blum.com/singleapplications
In addition to SERVO-DRIVE flex, other single applications exist for the tried-and-tested easy-to-use SERVO-DRIVE system. For example, waste bin pull-outs or individual lift systems in wall cabinets can be fitted with an electrical system.
Other single applications for SERVO-DRIVE
13
SERVO-DRIVE uno for AVENTOSIf just one lift system is to be fitted with an electrical system, SERVO-DRIVE uno for AVENTOS is the ideal motion support system for the wall cabinet. Individual lift systems can be opened with a light touch and closed silently and effortlessly with BLUMOTION.
SERVO-DRIVE uno for waste bin pull-outsUse your hip, knee or foot – a short press on the front is all it takes and the pull-out opens automatically. SERVO-DRIVE uno for waste bin pull-outs is a convenient retrofitting solution and can be mounted in just a few simple steps.
SERVO-DRIVE flex
14
Z10C500A
Z10M200x
Z10NE030x
Z10NG000
Z10K300A
Z10NG120
Z10V100E.01
Z10K0009
21P5020
Z10C5007
Z10K300A
☎ Z10NA30(xy)F
Z10C500A1x
1x
1x
1x
1x
2x
Order specification
Ordering for two units
SERVO-DRIVE flex set
SERVO-DRIVE flex set
Ordering for one unit
Blum 12W plug-in transformer (see table on page 16)
Blum 24W transformer (application for more than one unit, see table on page 16)
Flex (see table on page 16)
Alternative: transformer unit housing for panel fixing
Transformer unit housing for cabinet underside fixing
Synchronisation cable 300 cm, R7035 light grey (only for freezers with a height of 178 cm)
Connecting node (1x), Cable end protector (2x)
Cable holder
Recommended for the fridge/freezer combination:
SERVO-DRIVE switch
Wireless receiver
Black distribution cable for cutting to size
Freezer – NH ≥ 1780 mmRefrigerator – NH ≤ 1780 mmFreezer – NH < 1780 mm
Fridge/freezer combination
1 x SERVO-DRIVE flex set 2 x SERVO-DRIVE flex set 2 x SERVO-DRIVE flex set
15
SERVO-DRIVE flex
☎ Z10NA30(xy)F
Z10C5005
Z10C500A1 x
1 x
1 x
SWD
APÜBS
APL-UKNH
Order specification
Blum 12W plug-in transformer (see table on page 16)
SERVO-DRIVE flex set drive unit
Ordering for dishwashers
Additional mounting plate for use with dishwashers
Dishwasher
Recess height Bottom edge of work tops
Side panel thickness
Protrusion of work tops Front thickness
SERVO-DRIVE flex
16
Z10M200U
Z10M200C
Z10M200B
Z10M200D
Z10M200I
Z10M200K
Z10M200J
Z10M200E.OS
☎ Z10M200S.01
Z10M200E
Z10M200N
Z10M200A
☎ Z10M200H
Z10M200L
Z10M200T
Z10M200Z
DE, EN, FR, IT, NL
DA, EN, FI, NO, SV
EL, EN, HR, SL, SR, TR
EN, ES, FR, IT, PT
EN, ES, FR, (US, CA)
EN, ZH
CS, HU, SK, PL
BG, ET, LT, LV, RO, RU
Z10NE030A
Z10NE030B
Z10NE030C
Z10NE030D
Z10NE030G
Z10NE030H
Z10NA30(xy)F
Z10NE030E
Z10NE030F
21P5020
Z10C5007
E B K R N U A
DE, EN, FR, IT, NL CS, HU, PL, SK
DA, EN, FI, NO, SV BG, ET, LT, LV, RO, RU
EL, EN, HR, SL, SR, TR EN, ES, FR
EN, ES, FR, IT, PT EN, ZH
A EB FC GD H
Order specification
Optional accessories for refrigerators and freezers to extend the trigger region
SERVO-DRIVE switch
Wireless receiver
Flex US, CA
Flex UK
Flex CH
Flex DK
Flex IL
Flex AU
Flex JP
Flex Europe without plug
Flex BR
Flex Europe
Countries
Flex
Flex CN
Flex AR
Flex IN
Flex CL
Flex TW
Flex ZA
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
10 pieces
Blum transformer
Network adapter (x) *
24W
Only 1 Blum transformer permitted per distribution cable!
*Not permitted for more than one drive unit!
Language packages – assembly and instruction leaflet
Part no.
Variable
Language package (y)
including flex (1120 mm)
Blum 12W plug-in transformer
328
8
Ø5
(Ø8) min 10
8
37
32
30
Ø2.5
min
60
+ 1
17
SERVO-DRIVE flex
Preparation/drilling
Assembly using assembly jig
Important notes!
Drilling for mounting plate Drilling front for bumper Drilling front
Planning and assembly for refrigerators and freezers
Drive unit assembly Transportation lock
12
Click
SERVO-DRIVE flex
18
Catch plate assembly
Assembly for refrigerators and freezers
Front assembly
Assemble bumper Adjust front gap Reference run for start-up
3s
19
SERVO-DRIVE flex
Reset SERVO-DRIVE unit
Removal
Removal for refrigerators and freezers
X
Y
Y
SERVO-DRIVE flex
20
Wireless switch assembly (optional)
Wireless receiver assembly
Wireless switch activation
Recommendation for using wireless switch Wireless switch assembly
x = Work top height
y ≤ 200 mm
y > 200 mm
21
SERVO-DRIVE flexInstallation options
Access gap – measurements
General notes
If the door of the device is left open for a relatively long time, for example when putting away shopping, negative pressure may be created inside the refrigerator or freezer after it has been closed. This may result in it not being possible to open the door of the device for a few seconds. This negative pressure normally disappears after a short amount of time and the opening function becomes fully operational once again.
SWD+1637
+ 1
XYZ
SERVO-DRIVE flex
22
SWD
APÜBS
APL-UKNH
BS 16-19 mm
Preparation/drilling
Drive unit planning Access given protrusion of work tops
Drilling for mounting plate Drilling front
Dishwasher planning and assembly
X 30 mm APÜ 0 mm
Y 10 mm APÜ 20 mm
Z 0 mm APÜ 30 mm
Recess height
Front thickness
Bottom edge of work tops
Side panel thickness
Protrusion of work tops
23
SERVO-DRIVE flex
Catch plate assembly
Dishwasher assembly
Front assembly
Drive unit assembly
3s
SERVO-DRIVE flex
24
Dishwasher removal / cabling
Reset SERVO-DRIVE unit
Removal
Reference run
Cabling/information
Black = power supplyLight grey R7035 = communication (synchronisation cable)
1
2
4
3 56
33
3
4
25
SERVO-DRIVE flexAssembly Blum transformer
Transformer unit housing for base mounting Connecting node assembly
Transformer unit housing for panel mounting
Space requirement + safety distance for transformer unit housing
Note:Maintain a 30 mm safety distance from the bottom edge (base mounting) and/or front edge (panel mounting) and side edges of the transformer unit housing to the neighbouring elements to allow for air circu-lation; otherwise, there is a risk that the Blum transformer could overheat.
Do not damage piercing pins!
Panel mountingBase mounting
Pull-out stop
Pull-out stop
26
Blum in Austria and around the worldThe company has seven plants in Vorarlberg, Austria, additional production sites in Poland, the USA and Brazil and 28 subsidiar-ies/representative offices. Blum supplies more than 120 markets. The Blum Group employs 6,900 people in total, 5,300 of whom work in Vorarlberg.
Global customer benefits“Whether manufacturer, distribu-tor, fitter or kitchen user - every-body should personally enjoy the benefits of Blum products” - that is Blum’s philosophy on global customer benefits.
InnovationsTo support customers with innovative fittings solutions and secure long-term success for the company, we need to consistently invest in research and develop-ment, in plants and facilities and in employee training. With more than 2,600 patents worldwide, Blum is one of Austria’s most innovative companies.
QualityAt Blum, the comprehensive concept of quality does not only apply to products. Services and our cooperation with customers and partners should also meet the same quality requirements.
EnvironmentAt Blum, we believe that respon-sible ecological behaviour has long-term economic benefits. The longevity of products is just one of many important aspects. Other important measures include the use of environmentally friendly processes, the intelligent use of materials and prudent energy management.
DYNAMIC SPACEGood workflows, optimum use of storage space and high quality of motion are important features of a practical kitchen. Blum’s ideas for practical kitchen are designed to bring function, convenience and ergonomics to furniture interiors.
The company BlumFounded over 60 years ago by Julius Blum, today Blum is an internationally active family-owned company. Its strategic business segments include lift, hinge and pull-out systems. All our product developments focus on perfecting motion.
www.blum.com
27
Blum in Austria and around the worldThe company has seven plants in Vorarlberg, Austria, additional production sites in Poland, the USA and Brazil and 28 subsidiar-ies/representative offices. Blum supplies more than 120 markets. The Blum Group employs 6,900 people in total, 5,300 of whom work in Vorarlberg.
Global customer benefits“Whether manufacturer, distribu-tor, fitter or kitchen user - every-body should personally enjoy the benefits of Blum products” - that is Blum’s philosophy on global customer benefits.
InnovationsTo support customers with innovative fittings solutions and secure long-term success for the company, we need to consistently invest in research and develop-ment, in plants and facilities and in employee training. With more than 2,600 patents worldwide, Blum is one of Austria’s most innovative companies.
QualityAt Blum, the comprehensive concept of quality does not only apply to products. Services and our cooperation with customers and partners should also meet the same quality requirements.
EnvironmentAt Blum, we believe that respon-sible ecological behaviour has long-term economic benefits. The longevity of products is just one of many important aspects. Other important measures include the use of environmentally friendly processes, the intelligent use of materials and prudent energy management.
DYNAMIC SPACEGood workflows, optimum use of storage space and high quality of motion are important features of a practical kitchen. Blum’s ideas for practical kitchen are designed to bring function, convenience and ergonomics to furniture interiors.
The company BlumFounded over 60 years ago by Julius Blum, today Blum is an internationally active family-owned company. Its strategic business segments include lift, hinge and pull-out systems. All our product developments focus on perfecting motion.
www.blum.com
All c
onte
nt is
cop
yrig
hted
by
Blum
.Su
bjec
t to
tech
nica
l mod
ifica
tions
and
cha
nges
to th
e ra
nge
with
out n
otic
e.
Julius Blum GmbHFurniture Fittings Mfg.6973 Höchst, AustriaTel.: +43 5578 705-0Fax: +43 5578 705-44E-mail: [email protected]
Blum U.K.Mandeville DriveKingston, Milton KeynesGB-Buckinghamshire MK10 0AWTel.: 01908 285700Fax: 01908 285701E-mail: [email protected]
Prin
ted
in A
ustri
a · I
DN
R: 9
75.6
88.8
· EP
-257
/4 E
N-G
B/12
.16-1