JOSEPH MADY PAS 1192 TO ISO 19650 - Cita · 2018. 12. 3. · UK standards BS 1192 IS EN ISO 19650-1 + National Foreword PD 19650-0 Guide to IS EN ISO 19650 Q1 2019 IS EN ISO 19650-2

JOSEPH MADY

TRANSITIONING FROM PAS 1192 TO ISO 19650


• Introduction

• Digital Construction Technologies Group

• BRE

• NBC Roadmap

• Current ISO process

• PAS 1192 vs ISO 19650

Agenda

• B.Eng Tech, Electrical Services Engineering, DIT

• BSc, Electrical Services & Energy Management, DIT

• MSc, Applied Building Information Modelling & Management, DIT

• MSc, Business (Leadership & Management Practice), UCD

• Member Chartered Quality Institute (CQI)

• 15 years’ industry experience (trade background)

• Part time Lecturer DIT/SCSI

• Contributed to the creation of course

• NSAI BIM Working Group Member

• Reviewing National BIM Standards

• Assessing ISO standards

• CIF Committee 4.0 Member

• Active working group member

• Bidding for BIM

• Starter pack (Doc 3)

• Eastern Region BIM Member

• Steering Committee member

• ETOS (TEEU)

• Enable the creation of a BIM training course

Joseph Mady MSc, BSc, B.Eng


Insert keynote titlehere over as many lines as necessary


BIM

Resilience

Energy

InnovationFire

Safety

– Worlds first building sciencecentre

– Set up by Government in 1921 to improve the quality and performance ofbuildings

– Privatised in 1997 - now owned by the BRE TrustCharity

Resilience


What do?

Consultancy

ProductsHome Quality Mark

SMARTWaste

Yellow Jacket

Site Smart

BREEAM

Testing &Certification

e.g. ISO, CE Marking

Research

InnovationsPark

BREAcademy

Events & Conferences

InnovationsPark

Events & Conferences


ONLINE TRAINING COURSES

BIM LEVEL 2 FUNDEMENTALS

BIM PIM / TIM

BIM LEVEL 2 CERTIFIED PRACTITIONER SCHEME

BUSINESS SYSTEM CERTIFICATION



Committee: ISO/TC 59/SC13 Construction works information

ISO 19650-1 BIM Concepts and principles (based on IS 1192) (Anticipated Nov 2018)

ISO 19650-2 BIM Delivery phase of assets (based on PAS 1192-2) (Anticipated Nov 2018)

ISO 19650-3 Operational phase of assets (based on PAS 1192-3) (Anticipated 2020)

ISO 19650-5 Security-minded approach to information management

(based on PAS 1192-5) (Anticipated 2020)

Committee: NSAI Technical Committee

Coordinates Ireland input into CEN an ISO

Adopts ISs and ISOs as Irish Standards

Develops a local annex document

Committee: CEN/TC 442 Building Information Modelling

Adopts ISO/IECs i.e. all of the above

Develops ENs to complement ISO/IEC

Product data templates, data dictionaries and smart CE Marking


2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 2021

Lord Francis

Maude

Government

Construction

Strategy

Making BIM Level 2 ‘Business As Usual’

IS 1192:

2007

PAS 1192-5 PAS 1192-2 PAS 1192-3

BS 8536-1 BS 8536-2BS 1192-4

PAS 1192-6

Level 2 BIM Mandate

Release of the NBC roadmap

Low

Carbon

Construction

Report

BIM

Strategy

Paper

Supporting standards

Formation of NBC

Formation of BIM Task

Group

NSAI Mirror committee

IS EN ISO 19650-1 + National Foreword

IS EN ISO 19650-2 + National Annex

PD 19650-0 Guide to IS EN ISO 19650


UK standards

BS 1192



Q1 2019


IS EN ISO 19650-1: 2018

Organization of information about construction works —Information management using building information modelling —Part 1: Concepts and principles

IS EN ISO 19650-2: 2018

Organization of information about construction works —Information management using building information modelling —Part 2: Delivery phase of the assets

PD 19650-0:2018

Organization of information about construction works —Information management using building information modelling –Part 0: Guide to IS EN ISO 19650:2018

Organization of information about construction works —Information management using building information modelling –Part 0: Guide to IS EN ISO 19650:2018

International standards





IS EN ISO 19650-1: 2018

Organization of information about construction works — Information management using building information modelling — Part 1: Concepts and principles

IS EN ISO 19650-2: 2018

Organization of information about construction works — Information management using building information modelling — Part 2: Delivery phase of the assets

PD 19650-0:2018

Organization of information about construction works — Information management using building information modelling – Part 0: Guide to IS EN ISO 19650:2018

Organization of information about construction works — Information management using building information modelling – Part 0: Guide to IS EN ISO 19650:2018

+

PAS 1192-5:2015

PAS 1192-3:2014 BS 1192-4:2014

BS 8536-1&2


NOTE: DCT CAN SUPPORT THIS TRANSITION


ISO 19650 - 1 & 2 PAS 1192 - 2

Clause Clause

1 Scope (1 & 2) 1 Scope (1 & 2)

2 Normative References (1 & 2) 2 Normative References (1 & 2)

3 Terms and Definitions (1 & 2) 3 Terms and Definitions (1 & 2)

4 Information Management Process (1 & 2) 4 Overview of Documents referenced in Specification

5 Definition of Requirements 5 Information Delivery – Assessment and Need

6 The Information Delivery Cycle 6 Information Delivery – Procurement

7 Project and Asset Information Management Roles

7 Information Delivery – Post Contract Award

8 Container Based Collaborative Working 8 Information Delivery – Information Mobilization

9 Contractor Party Capability and Capacity 9 Information Delivery – Production

10 Information Delivery Planning 10 Information Delivery – Asset Information Model (AIM) Maintenance

11 Managing the Development of Information 11 N/A

12 Common Data Environment 12 N/A

Note: when ISO 19650 allows a local annex document




Both parts 1 and 2 have been developed to work in alignment with the already established business management system standard ISO 9001, incorporating the plan-do-check-act principle, as well as ISO 55000 on asset management

The UK-familiar “Level 2” BIM, which the BS/PAS 1192 standards help define, is now referred to as “Stage 2” BIM

Those familiar with PAS 1192-2 will know that the PAS’s structure follows the ‘information delivery cycle’ process. ISO 19650 also follows this cycle, presenting its requirements in a logical flow, mirroring the timeline of the requirements in practice as much as possible from tendering activities through to mobilization and delivery


ISO 19650 re-establishes the importance of the CDE and outlines its principles and core working processes. These include the familiar WIP (work in progress), Shared, Published and Archive areas.

Familiar terminology and concepts found in the ISO/DIS 19650 standards include: BEP (BIM execution plan), MIDP/TIDP (master/task information delivery plan), PIM/AIM (project/asset information model), OIR (organisational information requirements) and AIR (asset information requirements).

The principal project-EIR remains but has had a clarification changing from “employer’s” information requirements to “exchange” information requirements.



ISO 19650 defines the areas that need to have clearly appointed roles, divided into two groups; those involved in the management of information and those involved in production of information. The appointment of these roles, the names of which reflect those in PAS 1192-2 e.g. interface manager, should reflect the nature and complexity of the project and examples of specific tasks are given within an informative (non-mandated) annex.

New definitions include ‘project information protocol’ which defined the terms and clauses of appointment specifically relating to the exchange of information between appointing and appointed parties


ISO 19650-2 states that files should have a unique ID, based on upon an agreed and documented convention. The UK Annex aligns this requirements to the naming convention defined within BS 1192

ISO 19650-2 states that the CDE shall enable each “container” (e.g. file) to have the attributes (meta-data) ‘status’, ‘revision’ and classification. Similar to the above, the UK Annex aligns this requirements to the naming convention defined within BS 1192


➢ Level of Information needed (LOIN)

➢ Familiar terminology and concepts

➢ ISO 19650 information deliver cycle process similar to that as PAS 1192-2

➢ All Countries will have an annex document

➢ Get involved with the NSAI BIM Technical Committee


JOSEPH MADY
