JORDAN PETROLEUM REFINERY CO. LTD. Imported Aviation Gasoline

Specifications QS-PL 138

Laboratories & Quality Control Department

Title : Specifications of Imported Aviation Gasoline

Issued: May, 2014 Issue: 2 (Rev.1) QMS – QS-PL138 / HQ Page: 1 of 1 Tel. No. : + 962-6-4630151 E-mail : addewan@jopetrol.com.jo Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan

S.N Characteristics Test Method Control Limits

1 Appearance - Visual C & B1

2 Reid Vapour Pressure , 37.8 oC KPa

ASTM D-5191 38.0 – 49

3 Density @ 15 oC g / ml ASTM D-4052 Report

4 Distillation: ASTM D - 86

4.1 Initial Boiling Point oC Report

4.2 10 Volume % Evaporated @ oC Max. 75

4.3 40 Volume % Evaporated @ oC Min. 75

4.4 50 Volume % Evaporated @ oC Max. 105

4.5 90 Volume % Evaporated @ oC Max. 135

4.6 Final Boiling Point oC Max. 170

4.7 Sum of 10 % + 50 % evaporated oC Min. 135

4.8 Residue Volume % Max. 1.5

4.9 Loss Volume % Max. 1.5

5 Net heat of Combustion MJ / Kg ASTM D - 4529 Min. 43.5

6 Total Sulfur Mass % ASTM D-4294 Max. 0.05

7 Corrosion Copper ( 2 hr @ 100 oC) Class. ASTM D-130 Max. 1.0

8 Freezing Point oC ASTM D - 7153 Max. -58

9 Existent Gum mg/100 ml ASTM D-381 Max. 3.0

10 Color - Visual Blue2

11 Lead Content g Pb / L ASTM D-3341 Max. 0.56

13 Knock Rating

13.1 Lean mixture motor method octane number

- ASTM D-2700 Min. 99.5

13.2 Performance Number - ASTM D-909 Min. 130

14 Electrical Conductivity Ps/m ASTM D-2624 50-6003

15 Water Reaction ASTM D-1094

15.1 Interface rating ml Max. 2.0

15.2 Volume change ml Max. 2.0

16 Oxidation stability (16 hrs.) ASTM D-873

16.1 Potential Gum mg/ 100ml Max. 6

16.2 Precipitate mg/ 100ml Max. 2

(1) The finished fuel shall be visually free from solid matter and undissolved water at ambient temperature. (2) Blue limits are (Min. 1.7-Max. 3.5). (3) Applied only when an electrical conductivity additive is used. (4) The supplier shall report the amount of additive added. (5) This specification is based on Defence Standard 91-90, Issue3 (20 November, 2009).

JORDAN PETROLEUM REFINERY CO. LTD. Jet A - 1 Specifications

QS-PL 109 Laboratories & Quality Control Department

Title : Specifications of Aviation Turbine Fuel (Jet A - 1)4

Tel. No. : + 962-6-4630151 E-mail : addewan@jopetrol.com.jo Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan

S.N Characteristics Test Method (s) Control limits

1 Appearance

Visual B & C 1

2 Density @ 15 oC Kg / m

3 ASTM D-4052 775 - 840

3 Distillation : ASTM D-86

3.1 Initial boiling point oC Report

3.2 10% Recovered Temp. oC Max. 205

3.3 50% Recovered Temp. oC Report

3.4 90% Recovered Temp. oC Report

3.5 Final Boiling Point oC Max. 300

3.6 Residue Volume % Max. 1.5

3.7 Loss Volume % Max. 1.5

4 Total Sulfur Mass % ASTM D-4294 Max. 0.3

5 Corrosion Copper ( 2 hr @ 100 oC) Class. ASTM D-130 Max. 1

6 Flash Point oC ASTM D-56 Min. 38

7 Freezing Point oC ASTM D- 7153 Max. - 47

8 Aromatics Volume % ASTM D-1319 Max. 25

9 Total Acidity mg KOH / g ASTM D- 3242 Max. 0.015

10 Existent Gum mg / 100 ml ASTM D- 381 Max. 7

11 Sulfur , Mercaptan Mass % ASTM D- 3227 Max. 0.003

12 Net Heat of Combustion MJ / Kg ASTM D - 4529 Min. 42. 8

13 Viscosity @ - 20 oC cSt ASTM D - 445 Max. 8.0

14 Smoke Point mm ASTM D - 1322 Min. 25

15 Electrical Conductivity @ oC pS / m ASTM D - 2624 50 - 600

16 Thermal Stability , JFTOT @ min. 260oC ASTM D - 3241

16. 1 Filter Pressure Drop mmHg Max. 25

16. 2 Visual Tube Deposits Rating 2 < 3

17 Particulate Matter mg / L ASTM D - 5452 Max. 1.0

18 Water Separation with SDA MSEP-A 3

Rating ASTM D - 3948 Min. 70

19 Colour ASTM D-156 Report

1 Clear, bright and visually free from solid matter and undissolved water at ambient fuel temperature 1 Visual inspection according to ASTM D-4176 test method 2 No peacock or abnormal Colour deposits 3 Applies only at point of manufacture

Issued: May, 2014 Issue: 2 (Rev.1) QMS – QS-PL109 / HQ Page: 1 of 2

JORDAN PETROLEUM REFINERY CO. LTD. Jet A - 1 Specifications

QS-PL 109 Laboratories & Quality Control Department

Title : Specifications of Aviation Turbine Fuel (Jet A - 1)4

Tel. No. : + 962-6-4630151 E-mail : addewan@jopetrol.com.jo Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan

S.N Characteristics Test Method (s) Control Limits

20 Particulate, at point of manufacture, cumulative channel particle counts : Channel Counts

ISO Code

20.1 ≥ 4 μm

Individual channel

counts & ISO Code

IP 565 Report Report

20.2 ≥ 6 μm IP 565 Report Report

20.3 ≥ 14 μm IP 565 Report Report

20.4 ≥ 21 μm IP 565 Report Report

20.5 ≥ 25 μm IP 565 Report Report

20.6 ≥ 30 μm IP 565 Report Report

S.N Additives Test Method (s) Control Limits

1 Antioxidants mg / L - Max. 24

2 Static dissipater mg / L - Max. 3.0

4 This specification is based on:

Issued: May, 2014 Issue: 2 (Rev.1) QMS – QS-PL109 / HQ Page: 2 of 2

Refined Products Sale and Purchase Agreement, signed by local distribution companies dated April, 2013

DEF STAN 91-91/Issue 7, Amendment 2, dated 1st March 2013, Jet A-1

ASTM D-1655-13a, Jet A-1

JORDAN PETROLEUM REFINERY CO. LTD. JP8 ( F 34 ) FSII Specifications

QS-PL 110 Laboratories & Quality Control Department

Title : Specifications of Aviation Turbine Fuel ( JP8 ( F34 ) FSII )4

Tel. No. : + 962-6-4630151 E-mail : addewan@jopetrol.com.jo Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan

S.N Characteristics Test Method (s) Control limits

1 Appearance

Visual C & B (1)

2 Density @ 15 oC g / ml ASTM D-4052 0.775 - 0.840

3 Distillation : ASTM D-86

3.1 Initial Boiling Point oC Report

3.2 10% Recovered Temp. oC Max. 205

3.3 20% Recovered Temp. oC Report

3.4 50% Recovered Temp. oC Report

3.5 90% Recovered Temp. oC Report

3.6 Final Boiling Point oC Max. 300

3.7 Residue Volume % Max. 1.5

3.8 Loss Volume % Max. 1.5

4 Total Sulfur Mass% ASTM D-4294 Max. 0.3

5 Corrosion Copper ( 2 hr @ 100 oC) Class. ASTM D-130 Max. 1

6 Flash Point oC ASTM D-56 Min. 38

7 Freezing Point oC ASTM D- 7153 Max. - 47

8 Aromatics Volume % ASTM D-1319 Max. 25

9 Total acid number mg KOH / g ASTM D- 3242 Max. 0.015

10 Existent Gum mg / 100 ml ASTM D- 381 Max. 7

11 Sulfur , Mercaptan Mass % ASTM D- 3227 Max. 0.002

12 Water Reaction : Interface Rating ASTM D-1094 Max. 1b

13 Net heat of combustion MJ / Kg ASTM D - 3338 Min. 42. 8

14 Kinematic Viscosity @ - 20 oC cSt. ASTM D - 445 Max. 8.0

15 Smoke Point mm ASTM D - 1322 Min. 25

16 Thermal Stability , JFTOT @ 260 o

C ASTM D - 3241

16.1 Change in Pressure Drop mmHg Max. 25

16.2 Heater Tube Deposit, Visual Rating Max. < 3 (2)

17 Fuel Electrical Conductivity @ oC pS / m ASTM D - 2624 150 - 600

18 Particulate Matter mg / L ASTM D - 5452 Max. 1.0

19 Filtration time Minute - Max. 15

20 Water Separation with SDA, MSEP-A Rating ASTM D - 3948 Min. 70

21 Hydrogen Content Mass % ASTM D- 3343 Min. 13.4

22 Color Saybolt ASTM ASTM D - 156 Report

23 Calculated Cetane index - ASTM D-976 Report

(1)The finished fuel shall be visually free from undissolved water, sediment, or suspended matter and shall be clear and bright. (2)No peacock or abnormal colours allowed. Issued: May, 2014 Issue: 2 (Rev.1) QMS – QS-PL110/ HQ Page: 1 of 2

JORDAN PETROLEUM REFINERY CO. LTD. JP8 ( F 34 ) FSII Specifications

QS-PL 110 Laboratories & Quality Control Department

Title : Specifications of Aviation Turbine Fuel ( JP8 ( F34 ) FSII )4

Tel. No. : + 962-6-4630151 E-mail : addewan@jopetrol.com.jo Fax. No. : + 962-6-4657934 P.O.Box: 1079 Amman 11118- Jordan

S.N Characteristics Test Method (s) Control Limits

24 Particulate, at point of manufacture, cumulative channel particle counts : Channel Counts

ISO Code

24.1 ≥ 4 μm

Individual channel

counts & ISO Code

IP 565 Report Report

24.2 ≥ 6 μm IP 565 Report Report

24.3 ≥ 14 μm IP 565 Report Report

24.4 ≥ 21 μm IP 565 Report Report

24.5 ≥ 25 μm IP 565 Report Report

24.6 ≥ 30 μm IP 565 Report Report

S.N Additives Test Method (s) Control Limits

1 Antioxidants mg / L - Max. 24

2 Static dissipater mg / L - Max. 3.0

3 Corrosion inhibitor mg / L - Max. 24(3)

4 Fuel System Icing Inhibitor Volume % ASTM D - 5006 0.07 – 0.10

(3) Max. Concentration limit depends on the type of (Inhibitor, Corrosion). (4)This specification is based on MIL-DTL-83133H dated 24th December, 2013 & DEF STAN 91-87 ANNEX (A) Issue6 dated 20th March, 2009.

Issued: May, 2014 Issue: 2 (Rev.1) QMS – QS-PL110/ HQ Page: 2 of 2